Benro TTOR24CLVS4PRO Tortoise Carbon Fiber 2 Series Tripod System with S4Pro Video Head
Benro Tortoise Carbon Fiber 2 Series Tripod System with S4Pro Video Head TTOR24CLVS4PRO
Benro Tortoise Columnless CF Zero Series 3-Leg Section Tripod with GX25 Ballhead
Benro Tortoise Columnless Carbon Fiber Zero Series Tripod with GX25 Ball Head TTOR03CGX25
Benro Video Tripod Hi-Hat 75mm Black HH75AV
The Benro 75mm Hi-Hat is a versatile video production tool that allows for unique camera placement and comes in a portable package. This aluminum leg/magnesium bowl hi-hat can be placed low to the ground, on stairs or even secured to a wooden board. The small footprint allows the hi-hat to be used in tight spaces and on smaller surface areas. Each leg can be independently positioned at one of the three locks located on the outside of the bowl. In addition, each leg features oversized rubber twist locks and is telescoping for adjusting the height Features: 3/8"-16 low profile adapter which is designed to help capture normally difficult low angle shots. Travel-friendly, the Hi-Hat comes with a custom carrying case and is small enough to fit in any carry on size luggage. There are three accessory mounts on the outside of the bowl which come in handy for attaching monitor arms. Ideal for location shooting or for studio use. Limited 3-Year Warranty (5-Years with Online Registration)
Benro MoveOver4 45mm Wide Aluminum Rail 900mm Video Slider, No Case #A04S9
MoveOver4 45mm Wide Aluminum Rail 900mm Slider (No Case).
Benro MCT28AF Connect Aluminum Video Monopod S2 PRO Flat Base Fluid Video Head
Benro MCT28AF Connect Aluminum Video Monopod with 3-Leg Base and S2 PRO Flat Base Fluid Video Head
Benro Aluminum Short Center Column, Series 1 #ASC1
The Benro BRASC1 Aluminum Short Centre Column, is for use on Benro 1 size tripods and gives added versatility to photo shoots. It offers added height, or gets equipment lower to the ground.
Benro TMA28A Mach3 Aluminum Series 2 Tripod, 4 Section, Twist Lock, MPC
Designed to offer compact and lightweight camera support. Weighing just 3.9 lbs. and able to hold up to 30.9 lbs., the TMA28A can extend from a minimum height of 12.4" up to 61.2". The 4-section legs are held in place by twist locks and can be adjusted independently. Equipped with interchangeable screw-in rubber feet and stainless steel spiked feet for increased stability. In addition, a removable leg can be combined with the center column to create a full-size monopod. A 3/8"-16 thread on top of the tripod allows you to attach any compatible tripod head of your choice. Limited 3-Year Warranty (Extended to 5-Years with Online Registration).
Benro A373T Aluminum Video Tripod (75mm Bowl)
The Benro A373T is a section, 75mm bowl aluminum video tripod with a single tube leg design. Single tube video tripods are typically lighter and have a few advantages over tandem tripods especially for shooting outdoors. Each tripod leg can be positioned independently to one of three leg positions located on the magnesium shoulder. This feature is especially helpful when shooting on uneven terrain. The tripod has a standard 75mm metal bowl. The legs come with twist locks that only require a half turn to lock and unlock. Each leg section is removable and can be cleaned after use in rough conditions or Environmental such as saltwater. The rubber feet can be unthreaded and replaced with the included spiked feet. A padded carrying case with a shoulder strap is also included. Get an extended warranty and other great benefits when you purchase this product and join Benro's Super User Group! To learn more about this program and to sign up for Benro's Super User Group please download the User Guide and Specification Sheet
Benro X-Series 3XS Lite 3-Axis Handheld Smartphone Gimbal Stabilizer #3XSLITE
The Benro X-Series 3XS Lite is a 3-axis smartphone gimbal stabilizer with a unique foldable arm design that allows for easy storage and travel.The 3XS Lite is unlike other smartphone gimbal stabilizers, as it allows for the gimbal to be folded up and carried with minimal storage space needed. The gimbal can fit easily in most bags or jacket pockets. This allows it to be carried most places. The Benro 3XS Lite also features a barrier-less smartphone clamp. This design also allows the user to go between horizontal and vertical orientations automatically with the push of a button, and to access your smartphone's ports in either mode. Ideal for most smartphones, the 3XS Lite features a 2000 mAh capacity battery which provides 24-hours of use. The 3XS Lite will keep up with you during the most extensive days of shooting. With multiple customizable buttons, you can easily select and control your desired functions with each button by using the companion smartphone app. By pressing down on one of the customizable buttons, you can switch between features such as Roll Following, Face Tracking, automatic rotation of your phone's orientation from 180 to 90 degrees, and more. The handle also features a trigger button which will allow you to either use Universal Follow Mode (default) or Locked-down mode (trigger depressed). With Universal Follow Mode, it provides smooth camera movements towards the direction you're aiming. You would use this mode when circling around a subject or making several dynamic camera movements following a subject. Locked-down mode keeps the camera locked on a subject while moving the gimbal. With this mode you can replicate movements similar to a jib or slider. By using the directional button in conjunction with these modes, you can flawlessly control your movements. The threaded receiver allows for additional attachments, giving you even more flexibility with your shots. The companion smart phone app allows you to calibrate your 3XS Lite, adjust parameters, update the firmware, create a panorama, or create a beautiful time-lapse with dynamic motion. For advanced smartphone camera control, you can directly operate the photo shutter/focus, video record, and zoom making filming more convenient. The underside of the Benro 3XS Lite handle has a 1/4"-20 threaded hole for mounting the stabilizer to a tripod or using desired mounted accessories. This allows you to use the 3XS Lite handsfree during Panorama or Motion time-lapse modes, as well as during Object or Face Tracking modes. Finally, the 3XS Lite offers the ability to use an external microphone without interfering with the operation of the gimbal. With the included 3.5mm audio cable and built in passthrough, you can mount any compatible 3.5mm (TRRS) microphone onto the handle of the gimbal for high quality audio recording directly to your smartphone. The Benro 3XS Lite is ideal for most smartphones in the market today. Boost your production value while traveling light and compact with the X-Series 3XS Lite Stabilizer. FeaturesCollapsible Gimbal Arm: The collapsible gimbal arm allows for easy and compact gimbal storage. Long Battery Life: The 3XS Lite will last for 24 hours on a single charge. Smartphone App: Use the 3XS Lite with the Benro Gimbals smartphone app. The 3XS can also be used without the app following activation.Automatic orientation change: The 3XS Lite will go from horizontal to vertical and vice-versa with the single push of a button. No adjustment or rebalancing needed.
Benro GSR250 50cm (19.68") GoRail 2 for GSC290 GoCoupler
The GoRail adds flexibility to your SystemGo tripod when combined with the matching GoCoupler. The GSR250 is compatible with the GSC290 GoCoupler.
Benro Tripster Travel Carbon Fiber Tripod/Monopod, 2 Series, Black #FTR28CB1GBLK
Benro Tripster Travel Carbon Fiber Tripod/Monopod, 2 Series, Black
Benro BK10 Mini Tripod/Selfie Stick Ball Head & GoPro & 1.9-3.9" Black
Benro Mini Tripod/Selfie Stick with Ball Head & Adapters for GoPro & 1.9 - 3.9" Smartphones
Benro 100mm Video Hi-Hat With 100mm Bowl
The Benro 100mm Video Hi-Hat With 100mm Bowl is a versatile video production tool that allows for unique camera placement and comes in a portable package. This aluminum leg/magnesium bowl hi-hat can be placed low to the ground, on stairs or even secured to a wooden board. The small footprint allows the hi-hat to be used in tight spaces and on smaller surface areas. Each leg can be independently positioned at one of the three locks located on the outside of the bowl. In addition, each leg features oversized rubber twists locks and is telescoping for adjusting the height. When you combine these two features, you can easily set up the hi-hat for use on uneven terrain and even stairs.The 100mm version will accept a 100mm video head and includes a 3/8"-16 low profile tie down adapter for getting low to the ground shots. You can add a 100mm half-ball adapter (BL100) to mount any standard 3/8"-16 flat base video head or photo head. The large rubber feet are attached to a metal ball joint for quick positioning, which can be removed for attaching the included metal spiked feet. The feet also have pre-drilled holes for securing to wooden octagon boards when using on top of apple boxes or securing the board to the top of a ladder. There are three accessory mounts on the outside of the bowl come in handy for attaching monitor arms. Each 3/8"-16 male to ¼"-20 female insert can be used to convert any standard ¼"-20 screw to 3/8"-16 in addition to being removed for attaching 3/8"-16 accessories. Transporting the hi-hat is easy with the included carrying case.Features: Shoot Low: The hi-hat includes a 3/8-16 low profile tie down adapter for getting low to the ground shotsFriendly Traveling: The hi-hat comes with a custom carrying case and is small enough to fit in any carry on size luggageStandard 100mm Bowl Mount: The 100mm version will accept a 100mm video head and includes a 3/8-16 low profile tie down adapter for getting low to the ground shotMonitor & Accessory Mounts: There are three accessory mounts on the outside of the bowl come in handy for attaching monitor arm. Each /8-16 male to ¼-20 female insert can be used to convert any standard ¼-20 screw to 3/8-16 in addition to being removed for attaching 3/8-16 accessories.Small Footprint: The small footprint allows the hi-hat to be used in tight spaces and on smaller surface areasMounting Options: The feet have pre-drilled holes for securing to wooden octagon boards when using on top of apple boxes or securing the board to the top of a ladderMultiple Independent Leg Positions: There are three accessory mounts on the outside of the bowl come in handy for attaching monitor arms. Each 3/8-16 male to ¼-20 female insert can be used to convert any standard ¼-20 screw to 3/8-16 in addition to being removed for attaching 3/8-16 accessoriesTelescoping Legs: Each leg features oversized rubber twists lock and is telescoping for adjusting the height
Benro FPA39AB2 ProAngel Aluminum-Alloy #3-Series Tripod with B2 Ball Head
The Benro ProAngel FPA39AB2 is a ultra-lightweight and compact travel tripod kit. This #3 Series, 5 section tripod includes a B2 ballhead with a blue anodized aluminum Arca-Swiss style camera plate that incorporates a D-ring style camera screw. This ProAngel is ideal for small cameras ranging from mirrorless to full frame DSLR. ProAngel tripods are portable enough to fit inside small and medium sized bags due to the compact leg lock design. Each tripod features reverse folding legs making this a great travel tripod. With a single leg lock, one twist operates all leg sections. This makes ProAngel lighter and faster than traditional tripods. A simple half turn unlocks the leg and it can be stopped at any position. One leg includes a silicone rubber hand grip providing comfort and a firm grip while operating. The two section telescoping center column provides additional height when needed. The inluded B2 ballhead is removable. The column has a standard 3/8"-16 thread. Tripod bag with carrying strap included. SpecificationsMAXIMUM LOAD 26.4 lb (12 kg) MAX HEIGHT (24 & #176; LEG ANGLE) W/COLUMN EXTENDED63 in (160 cm) MAX HEIGHT (24 & #176; LEG ANGLE) W/COLUMN RETRACTED52 in (132 cm) MINIMUM HEIGHT 13.1 in ( 33.5 cm)MAXIMUM HEIGHT63 in (160 cm) FOLDED LENGTH 20.3 in ( 51.5 cm)NUMBER OF LEG SECTIONS5LEG LOCK TYPEQuick LockCENTER COLUMNRound tube with two sectionsQUICK RELEASE (QR) PLATEArca SwissBUBBLE LEVELYHEAD MOUNT THREAD SIZEDetachableWEIGHT 4.4 lb ( 1.99 kg)LEG DIAMETER 131 mmLEG DIAMETER 228 mmLEG DIAMETER 325 mmLEG DIAMETER 422 mmLEG DIAMETER 519 mm
Benro MoveOn10 Electronic Motion Control #MCA01
Benro's MoveOn 10 adds motion control to the MoveOver 12 camera slider. The MoveOn 10 is a simple to use analog motion control unit that allows for manual and programmable A to B camera movement. The speed is fully adjustable and allows for manual ramping during operation. The slowest setting will travel 1 meter (3.2 feet) over a 24-hour timespan, which is ideal for time-lapse. The fastest setting will travel 1 meter in 15 seconds, which is ideal for slo-motion or capturing fast movements. Repeatable Movement The MoveOn 10 is easy to program repeatable A to B camera movement. Smooth Movement The MoveOn 10 incorporates dampening to allow for smooth movement. Ideal for time-lapse The slowest setting will travel 1 meter (3.2 feet) over a 24-hour timespan, which is ideal for time-lapse. The fastest setting will travel 1 meter in 15 seconds, which is ideal for slo-motion or capturing fast movements. Portable The MoveOn 10 is a compact unit that is ultra portable and comes with its own carrying case. 5-Year Warranty 5 Year Warranty with Product Registration.
Benro Quick Release Clamp. Plate not included. L50 X W49 X 15mm #QRC50
The Benro QRC50 Quick Shoe is used to convey older Benro B Series Ball head to an Arca-Swiss style compatible system using a twist lock mechanism. The unit comes complete with fixing screw and Allen key.
Benro FGP18A Go Plus 4-Section Aluminum Tripod
The FGP18A SystemGo Plus Travel tripod series is the first to offer the compactness of a travel tripod with a versatile center column! The tripod is constructed from aluminum tubing with machined aluminum and magnesium alloy components. The tripod combines reverse folding legs that wrap around the center column providing a more compact unit for transportation, while it also has a versatile center column that can be removed from its conventional vertical position and can be swung through a 180 degree arc and locked into place at any point, which when combined with the three position leg angle settings makes this tripod perfect for low level macro photography. Other features include a built in monopod, easy to use twist leg locks, standard screw-in rubber & stainless spiked feet and a high quality padded tripod carry case.
Benro MoveOver8 18mm Dual Carbon Rail 900mm Video Slider with Carry Case #C08D9
Supports up to 17.6LBS
Benro Video Monopod Kit A38FDS2 Black
Benro A38FBS2 Video Monopod with Flip Lock Legs, S2 Head and 3 Leg Base (Black)
Benro Travel Angel Aluminum Series 1 Tripod Kit with B0 Head, 4 Section
The Travel Angel FTA18AB0 is part of Benro's most advanced range of compact, travel style photo tripods. This fully featured reverse folding tripod kit combines aluminum legs with magnesium castings and twist locks for uncompromising performance. One of the tripod legs can be easily converted into a monopod for extra versatility. Included in the kit is a triple action ball head with an arca-swiss style plate with individual controls for pan lock, drag and ball lock. Triple Action Ball Head The Travel Angel FTA18AB0 tripod kit contains a triple action ball head with quick release plate. With separate controls for pan lock, drag and ball lock, this head gives you complete control. Aluminum Legs The Travel Angel FTA18AB0 features aluminum leg construction making it both lightweight and sturdy. Reverse Folding Legs A specially designed spider allows the Travel Angel FTA18AB0's legs to be folded upward, greatly reducing the tripod's footprint when it is time to pack. Monopod Conversion It is extremely simple to convert one of the Travel Angel FTA18AB0's legs into a monopod adding even more versatility. Magnesium Casting Where ever possible the Travel Angel FTA18AB0 employs magnesium castings making it among some of the lightest tripods on the market. Carry Case Benro includes both a functional dust cover and a beautiful carrying case with each Travel Angel tripod.
Benro PU-5060 Quick Release Plate II #PU5060
PU-5060 Quick Release Plate II: Introduction: This universal QR plate fits for any camera body, slide-proof rubber mat ensures high stability, strength resistance between camera , lower rotatement and to secures the camera anti-worn. The reasonable plate design and moveable screw offers wide-range adjustments.
Benro PU40 Arca-Swiss Style Quick Release Plate. L40 X W38 X H10mm.
A Versatile Arca-type QR plate specifically designed to work with most compact, mirrorless, and DSLR cameras. The plate uses a standard 1/4"-20 mounting screw for camera attachment and a rubber padded base to prevent scratching and reduce camera movement. Aluminum Anodized surface treatment assures years of corrosion and abrasion-resistant operation. Ideal for location shooting or for studio use. Limited 5-Year Warranty (Extended to 10-Years with Online Registration).
Benro IB2 Triple Action Ballhead with PU60 Plate
B collection magnesium ball heads are for photographers requiring more control, higher-level features, and functionality. The IB2 Triple Action Ball Head from Benro is an Arca-type compatible head with a load capacity of 22 lb. It stands 3.9" high and weighs 14.5 oz. There are separate locks for both the ball movement and the 360° panning motion, as well as a friction control knob. A 90° notch makes it easy to switch to portrait orientation. The numbered scale on the head's base allows for easily repeatable pans, and a bull's eye bubble helps ensure the head is level with the horizon. Base Mount 3/8"-16 Thread. Ball Sphere Diameter 1.6" / 40 mm
Benro MCT28AF Connect Video 4 Section Aluminum Monopod, Max. Load 26.46 lbs
The Benro connect is a video monopod with a unique 3-leg base that converts to a low angle tripod/hi-hat. Ready for run-and-gun shooting with unmatched versatility this monopod is a compact portable and versatile tool for videographers on the go. Features: Converts to low angle tripod/Hi-Hat - the video head connects with the 3-leg base to go from monopod to low angle tripod/Hi-Hat. Built-in ball with lock knob. The 3-leg base Also has a built-in ball with lock knob for dynamic movements or to level out your shot. 3-Position leg angle - the 3-leg base has 3-position leg angle adjustment locks with each leg able to be positioned individually for uneven surfaces. Quick connect release - by pulling down on the lock sleeve you can unscrew the video head and the 3-leg base. Dual camera threads - a spring-loaded Dual camera thread (¼”-20 & 3/8”-16) is located on the top plate allowing you to mount a variety of cameras and Accessories.
Benro GSC290 90-Degree GoCoupler 2 for 2 Series SystemGo Tripod
The GoCoupler 90deg. allows you to attach an additional GoRail at the end of the SystemGo center column. This allows the GoRail to become height adjustable and you can mount a ballhead and/or other SystemGo accessories to the top of the GoRail. This is ideal for multi camera shoots or for turning your SystemGo tripod into a mobile workstation. The GSC290 is compatible with any 2 series SystemGo tripod.
Benro B1 Triple Action Quick Release Ballhead, Holds 31 Lbs
Universal Quick Release System The Benro Universal Quick-Release System is designed to the same specifications as the Arca-Swiss system, and is also compatible with other similarly designed quick-release systems 360-degree Panning Accurate panoramas can be easily orchestrated using the graduated panning scale for accurate image alignment Locking and Drag Control Separate lock and drag adjustment knobs help to avoid confusion when working fast Built-in Bubble Level Allows adjustment to prevent uneven pans and head movements
Benro KH25P Video Tripod with Head, 11lb Payload, Continuous Pan Drag, Anti-Rotation Camera Plate (KH26P)
The Benro KH26P Video Tripod Kit is ideal for compact digital video cameras, HDSLRs, and still cameras with long lenses weighing up to 11 lb (5 kg). This tripod replaces the popular KH26NL model and features continuous pan drag and an improved camera plate design. Now you can control the amount of tension while panning left to right for smooth and stable movement while recording.The KH26P features a 60mm bowl and head-mounted bubble level to ensure proper alignment for accurate camera placement and level panning. An interchangeable pan arm allows both right and left-handed use. The sturdy and lightweight tripod extends from a minimum height of 33.9 in (86.0 cm) to an impressive maximum height of 72.0 in (182 cm) allowing you to handle the camera comfortably. Twist-lock levers on the dual stage leg system allow you to make specific height adjustments rapidly and easily. The tripod can be folded to a length of 35.2 in (89.4 cm) making it easy to transport. A padded soft case is included at no extra cost.
Benro BINOH200 Arca-Swiss Style Binocular Bracket
Made of a lightweight and strong aluminum allow and treated with a scratch-resistant anodized finish, the Benro Arca-Swiss Style Binocular Bracket enables you to easily mount your binoculars outfitted with a 1/4"-20 threaded socket onto a photo/video/field tripod for hands-free use. Mounting your binoculars, especially high-powered sets or those with large objective lenses, onto a tripod or monopod helps to steady the view, reduce vibrations, and eliminate arm fatigue. The base of the adapter is designed to fit directly onto Arca-Swiss-style photo/video quick release heads, which eliminates the need for additional QR plates. If you aren't planning on using ahead, or your head is not an Arca-Swiss-style, the base also has both 1/4"-20 and 3/8"-16 female threads that make it compatible with just about any quick release plate, head, photo/video/field tripod, monopod, or window mount available today.
Benro FBAT05AVX20 Bat #0 Series Aluminum Travel Tripod with VX20 Ball Head
Benro Bat Zero Series Aluminum Travel Tripod with VX20 Ball Head FBAT05AVX20
Benro LBA2 Leveling Base, 110lbs Capacity
Easily convert any flat surface with a 1/4"-20 or 3/8"-16 thread to one with leveling control. The LBA2 is ideal for camera sliders, flat base video heads, jibs, tilt heads, etc. The bubble level is offset so its not blocked when in use. The LBA2 can handle payloads up to 110 lb. / 50 kg.
Benro TAD27A Adventure Aluminum Series 2 Tripod, 3 Section, Flip Lock
This classic design tripod, the Adventure TAD27A, offers advanced features and controls for exploring every style of photography. The Adventure tripod combines aluminum legs with lightweight magnesium castings and quick flip leg locks for ease of use. Aluminum Legs The Adventure tripod or tripod kit features aluminum leg construction making it both lightweight and sturdy. Magnesium Casting Where ever possible the Adventure tripod family employs magnesium castings making it one of the lightest tripods on the market. High Grade Flip Locks The Adventure tripod or monopod family utilizes high grade, reinforced flip locks for drastically increased longevity and to battle.
Benro Aluminum 2 Series gimbal Head (gH2)
The Benro gH2 gimbal Head is a specialized tripod head designed for photographers who want comfort, stability and smooth control with their heavier zoom lenses. This is something that you just can? t get with the standard ball head. The gH2 allows you to rotate your lens around its center of gravity enabling easy manipulation of large lenses up to 600mm. If its sport or wildlife photography, maneuverability and speed are two very important factors which the Benro gH2 supports, allowing photographers to capture those all important unpredictable moments. It comes with a QR plate which can be quickly removed by turning the knob on the side. The lens is set flat when using the gH-2, whereas a lens attached to the gH-1 is in an upright position. The gH2 is compatible with the international-style QR plates such as the Arca Swiss and the Benro PL Series special lens plates. UPC NO: 747380292853 SKU: CONSEB004LB45JQ
Benro MSD46C SupaDupa 6-Section Carbon Fiber Monopod, 72" Maximum Height
The MSD46C SupaDupa Carbon Fiber Monopod from Benro is a versatile and highly-portable carbon fiber tripod, well suited to travel, sports, and wildlife photography. With a maximum height of 72", this lightweight monopod weighs just 1.3 lb and folds to a compact 17.9", small enough to fit in a backpack or large camera bag. The six leg segments open quickly and easily using twist-lock joints, and the top joint features a flip-lock release for fast height adjustments on the fly. The MSD46C SupaDupa monopod features water-proof (and dustproof) twist locks. The round rotating foot features a built-in V-shaped bearing, so you can glide from shot to shot without lifting a foot. Combining twist locks with a CNC-machined, fast-action flip lock, it’s simple to fully extend, and then fine-tune the height of your monopod, with our newly added quick flip-lock. The included wrist strap provides convenient as well as secure handling. Mounting Screw 1/4"-20 Male, 3/8"-16 Male Load Capacity 88.2 lb.
Benro PP1 POCKETPOD TABLETOP TRIPOD PP1
Benro's PocketPod can be used as a tabletop tripod as well as a handgrip for smartphones, GoPro or DSLR cameras. Small enough to fit in your pocket, the PocketPod is made of high quality plastic with non-slip rubber feet and an all metal ball. The integrated ball head allows camera positions from horizontal to vertical and can be securely locked in any position with a quick twist of the locking ring. Each leg has two grooves for a more comfortable and secure grip when using as a handgrip. The PocketPod supports up to 3.3 pounds while weighing only 5.6 ounces (.35 lb). Its built-in ball head has a 1/4"-20 camera screw and a unique design that allows adjustments and locking with a single twist of the locking ring.
Benro Adventure 8X Carbon Fiber Series 2 Tripod Kit with B2 Ballhead #TAD28CB2
This classic design tripod kit, the Adventure TAD28CB2, offers advanced features and controls for exploring every style of photography. The Adventure tripod combines 8x carbon fiber legs with lightweight magnesium castings and quick flip leg locks for ease of use. Included in the kit is a triple action ball head with an arca-swiss style plate with individual controls for pan lock, drag and ball lock. Triple Action Ballhead The TAD28CB2 contains a triple action ballhead with quick release plate. With separate controls for pan lock, drag, and ball lock, this head gives you complete control. The included quick release plate is arca-swiss style, an industry standard. High Grade Flip Locks The Adventure tripod or monopod family utilizes high grade, reinforced flip locks for drastically increased longevity and to battle. Carbon Fiber Legs The Adventure tripod family features 8x Carbon Fiber legs. Constructed out of 8 layers of carbon fiber, these legs offer high levels of strength and very low weight. Magnesium Casting Wherever possible the Adventure tripod family employs magnesium castings making it one of the lightest tripods on the market. Carry Case Each Adventure tripod includes a quality carrying case with shoulder strap
Benro BV6H 75mm Video Head, 13.2lbs Capacity
The Benro BV6H is a lightweight video head with professional stepped controls ideal for camera setups up to 13.2 lb. The BV6H is equipped with operator side controls which are located on the left side of the head making it easy to adjust while operating the camera. The 8-step counterbalance (steps 0-7) allows you to dial in the right amount of counterbalance for each setup that helps when changing lenses or adding accessories. The 4-step pan & tilt drag controls offer a more professional style setup and help to repeat smooth movements. Two 3/8" accessory mounts come in handy when needing to add a simple audio recorder or monitor. For added versatility, the tie down stud is removable to convert the BV6 head to flat base mode for mounting to a slider.
Benro TTOR24CGX30 Tortoise Columnless Carbon Fiber Two Series Tripod with GX30 Ball Head
Benro Tortoise Columnless Carbon Fiber Two Series Tripod with GX30 Ball Head TTOR24CGX30
Benro B4 Triple Action Ballhead with PU70 Plate
Support up to 44.1 lb with the B4 Triple Action Ball Head from Benro. This standard ball head features separate locks for the ball movement and the 360° panning, as well as a friction control to adjust the amount of drag. The head is designed to fit on 4-Series Benro tripods but will work on most tripods with a 3/8"-16 threaded mount. The included quick-release plate is compatible with most Arca-type clamps. A 90° notch in the head allows you to easily adjust the camera to portrait orientation. A numbered scale on the base of the ball head assists with accurate repeat pans, and a bubble helps ensure that the head is level to the horizon. A 90 Degree notch helps you to quickly switch your camera to portrait mode.
Benro BV4H Video Head and A373F Series 3 Aluminum Tripod Legs Kit #A373FBV4H
6-step counterbalance (0-5) Counterbalance will help you counter the weight of your rig or heavy lens. Each step provides a different amount of counterbalance allowing you to dial in the right amount for your camera rig Independent Locks Both the pan lock and tilt lock can be turned on or off independently and are located on the operator side of the head for easy control. Tilt range for the BV4 is +90deg./-75deg. Carrying case included Heavy Duty Case and Strap included for handy transport and protection of the tripod and head 75mm bowl This tripod kit features the standard 75mm ball/bowl combo and the BV6 head comes with a 504PL compatible QR13 plate Stepped Drag Controls The 4-step pan drag (0-3) and 4-step tilt drag (0-3) use stepped controls which allows for quick, repeatable settings that operate the same way every time. Accessory mounting Two 3/8 Aluminum Tripod The 3 series, 3 section aluminum tripod legs have quick flip leg locks and includes a set of rubber and spiked feet
Benro VX30 Two Series ArcaType Ball Head -Aluminum
Benro VX30 Two Series ArcaType Ball Head -Aluminum VX30
Benro Rhino CF One Series 4-Leg Section Tripod/Monopod with VX20 Ballhead
- Rhino Series Tripod -The Rhino series of photographic tripods offers the best combination of strength and weight without compromising stability. With the reverse folding design, it is extremely portable and is equally suited for the studio as well as outdoors.The automatic leg angle adjustment allows you to change leg angles with the push of a button. Each Rhino tripod also converts to a full-size monopod when the designated leg and center column are combined.- VX Ballhead -To complete the new tripod ranges we are really pleased to introduce two new photo heads, with some features that will aid photographers in getting the best images.VX Dual Panoramic Ball HeadsThe VX Dual Panoramic series of ballheads offer dual panoramic mode, which allows you to pan the head from its base in addition to the quick-release platform. The controls are simple, with ball friction adjustment built into the main lock knob and an independent pan lock.This newly designed ballhead features a safety for the quick release plate.
Benro A38FS2 Video Monopod Kit
For the pro on the go nothing provides solid support, flexibility and portability like a Monopod. Pairing the proper Video Head, Monopod and Travel Case, each Benro Video Monopod Kit is based on an eighth-generation design of single leg tubes and flip lever leg lock mechanisms.
Benro A674TM 3-Section Dual Stage Tandem-Leg Video Tripod with 100mm Bowl
The A674TM two stage aluminum tripod is a double tandem leg design that uses an adjustable, removable spreader, a metal 100mm bowl, oversized quick positive leg locks and dual spike feet with pads, making this kit perfect for heavy loads and rigged cameras.
Benro Aluminum Short Center Column, Series 0 #ASC0
The Benro BRASC0 Aluminum Short Centre Column, is for use on Benro 0 size tripods and gives added versatility to photo shoots. It offers added height, or gets equipment lower to the ground.
Benro MoveOver12 22mm Dual Carbon Rail 900mm Video Slider with Carry Case #C12D9
MoveOver12 22mm Dual Carbon Rail 900mm Slider Includes Case.
Benro GH2 Aluminum Gimbal Head with PL100 Plate
The Benro GH2 Gimbal Head is a specialized tripod head designed for photographers who want comfort, stability and smooth control with their heavier zoom lenses. This is something that you just can’t get with the standard ball head. The GH2 allows you to rotate your lens around its center of gravity enabling easy manipulation of large lenses up to 600mm. If its sport or wildlife photography, maneuverability and speed are two very important factors which the Benro GH2 supports, allowing photographers to capture those all important unpredictable moments. It comes with a QR plate which can be quickly removed by turning the knob on the side. The lens is set flat when using the GH-2, whereas a lens attached to the GH-1 is in an upright position. The GH2 is compatible with the international-style QR plates such as the Arca Swiss and the Benro PL Series special lens plates.
Benro MSDPL46C SupaDupa Carbon Fiber Monopod w/ Leveling Pan Head 70 lb Load
The MSDPL46C SupaDupa Carbon Fiber Monopod with Leveling Pan Head from Benro is a versatile and highly-portable carbon fiber tripod, well suited to travel, sports, and wildlife photography. With a maximum height of 62", this lightweight monopod weighs just 2 lb and folds to a compact 19.1", small enough to fit in a backpack or large camera bag. Six leg segments open quickly and easily using twist-lock joints, and the top joint features a flip-lock release for fast height adjustments on the fly. The MSDPL46C SupaDupa monopod features a built-in leveling pan head with +/-20° of tilt and 360° pan rotation and an Arca-type compatible quick release set. It features a precision pan scale and a level shot may be maintained by using the built-in leveling ball in conjunction with the attached bubble level, no matter the terrain. Independent Pan Lock and the quick release knob includes a safeguard feature to prevent the quick release plate from falling. Max Load 70.5 lb Camera Mount 1/4"-20.
Benro VX20 Two Series Arca-Swiss Style Aluminum Ballhead
Featuring an elegant and minimalistic design with an excellent strength to weight ratio, the VX20 Two Series Arca-Type Aluminum Ball Head from Benro offers dual panoramic mode, which allows you to pan the head from its base in addition to the quick-release platform. The controls are simple, with ball friction adjustments built into the main locking knob and an independent pan lock. This newly designed ball head features a safety lock for the quick release plate, and the included bubble level enables you to accurately level out your shot. Aluminum ball head with 44 lb load capacity for outstanding strength to weight ratio. 360° pan movement lets you capture panoramic shots with ease
Benro TMA37C Mach3 9X Carbon Fiber Series 3 Tripod, 3 Section, Twist Lock
Support up to 35.3 lb worth of gear with the TMA37C Series 3 Mach3 Carbon Fiber Tripod from Benro. Made from 9-layer carbon fiber, the 3-section legs are secured via twist locks and extend to a maximum height of 63.6". The center column can be replaced with the included short column to allow the tripod to reach a minimum height of 15.2". The rubber feet can be swapped out for metal spikes so that the tripod can be used on hard surfaces, such as ice, or soft surfaces, like carpeting or a lawn. A ballast hook on the center column allows for the addition of stabilizing weight, and the included carrying case protects the tripod during transport. A 3/8"-16 threaded stud on the mounting platform lets you attach a head of your choice.
Benro DJ90 Monopod Head with PU60 Plate
Benro DJ90 Monopod Tilt Head DJ90
Benro TAD28C Adventure 8X Carbon Fiber Series 2 Tripod, 4 Section, Flip Lock
This classic design tripod, the Adventure TAD28C, offers advanced features and controls for exploring every style of photography. The Adventure tripod combines 8x carbon fiber legs with lightweight magnesium castings and quick flip leg locks for ease of use. Carbon Fiber Legs The Adventure tripod family features 8x Carbon Fiber legs. Constructed out of 8 layers of carbon fiber, these legs offer high levels of strength and very low weight. Carry Case Each Adventure tripod includes a quality carrying case with shoulder strap. Magnesium Casting Where ever possible the Adventure tripod family employs magnesium castings making it one of the lightest tripods on the market. High Grade Flip Locks The Adventure tripod or monopod family utilizes high grade, reinforced flip locks for drastically increased longevity and to battle.
Benro Tripster Travel Aluminum Tripod/Monopod, 1 Series, Blue #FTR19AB0GBLU
Benro Tripster Travel Aluminum Tripod/Monopod, 1 Series, Blue
Benro A2573F Aluminum Single Video Tripod, S4 PRO Video Head, Payload 8.8 lbs
The Benro A2573FS4PRO is a single tube style video tripod with the S4 PRO video head. The center column includes a leveling adapter so that the head can be leveled independently without having to adjust the tripod legs. The tripod also features flip locks, center column weight hook and 3 independent leg position angles. Rubber and spiked feet are both included.Despite its small size, the included S4 PRO is a versatile video head with additional counterbalance. The S4 PRO video head supports up to 8.8 lb./4kg. Equipped with a 60mm flat basewith a 3/8"-16 thread, the S4 PRO is a versatile creative tool allowing you to mount the head separately on sliders, jibs, or monopods.
Benro Adventure 4 Series Aluminum Monopod (MAD49A)
The Adventure Series 4 Aluminum Monopod combines classic design with advanced materials and incorporates flip lever locks for easy opening and closing.The 5 section aluminum tubes extends to a maximum height of 75.2" and weighs only 1.85 lbs., but can support 39.7 lbs.Features a mounting plate with a reversible 1/4"-20 and 3/8"-16 threaded mount for attaching a video head or directly to the camera.Ideal for location shooting or for studio use.Limited 3-Year Warranty (Extended to 5-Years with Online Registration).This classic design monopod, the Adventure MAD49A, offers advanced features and controls for exploring every style of photography. The Adventure combines aluminum tubes with quick flip leg locks creating a durable and easy to use monopod.
Benro PU-70 Quick Release Plate for B-2,B-3
Benro PU-70 Quick Release Plate
Benro A373F Aluminum Video Tripod and BV6 Head Kit With Benro DL-06 Dolly
8-step counterbalance (0-7) Counterbalance will help you counter the weight of your rig or heavy lens. Each step provides a different amount of counterbalance allowing you to dial in the right amount for your camera rig Independent Locks Both the pan lock and tilt lock can be turned on or off independently and are located on the operator side of the head for easy control. Tilt range for the BV6 is +90deg./-75deg. Carrying case included Heavy Duty Case and Strap included for handy transport and protection of the tripod and head 75mm bowl This tripod kit features the standard 75mm ball/bowl combo and the BV6 head comes with a 504PL compatible QR13 plate Stepped Drag Controls The 4-step pan drag (0-3) and 4-step tilt drag (0-3) use stepped controls which allows for quick, repeatable settings that operate the same way every time Accessory mounting Two 3/8 Aluminum Tripod The 3 series, 3 section aluminum tripod legs have quick flip leg locks and includes a set of rubber and spiked feet
Benro Video Tripod Kit A2573FS6PRO Aluminum
3.2 lb Payload/5+0 Steps Counterbalance 65mm Flat Base with 3/8"-16 Thread Low-Angle 17.5" to 71" Height (2 Stages) Three Leg Positions; Leveling Adapter The A2573F Aluminum Single Tube Tripod with S6Pro Fluid Video Head from Benro is a versatile system supporting up to 13.2 lb loads. It has a compact design with single-tube legs, and it features a 65mm flat base that allows moving the head from the tripod directly to sliders, jibs, and other support gear.
Benro GD3WH Precision Geared Tripod Head
The GD3WH is designed to offer precision control of camera movement and is ideal for studio still life photographers as well as those landscape photographers chasing golden hours at sunrise and sunset. The GD3WH delivers separate, precision movement in three directions. The controls allow the user to quickly set the camera position before using the large control knobs to apply minute movements guaranteeing absolute precision positioning for that perfectly framed shot. Independent movement in 3 ways - allows precise positioning Individual release controls - allows larger camera movement for approximate positioning Individual rotating control knobs - allows complete precision with camera positioning Arca-Swiss compatible QR plate - compatible with other heads in Benro range 3 bubble levels - assists in accurate leveling for precision positioning
Benro Adventure 3 Series Aluminum Monopod (MAD38A)
The Adventure Series 2 Aluminum Monopod combines classic design with advanced materials and incorporates flip lever locks for easy opening and closing.The 4 section aluminum tubes extends to a maximum height of 62.8" and weighs only 1.37 lbs., but can support 35.3 lbs.Features a mounting plate with a reversible 1/4"-20 and 3/8"-16 threaded mount for attaching a video head or directly to the camera.Ideal for location shooting or for studio use.Limited 3-Year Warranty (Extended to 5-Years with Online Registration).This classic design monopod, the Adventure MAD38A, offers advanced features and controls for exploring every style of photography. The Adventure combines aluminum tubes with quick flip leg locks creating a durable and easy to use monopod.
Benro X-Series 3XS 3-Axis Handheld Smartphone Gimbal Stabilizer
The Benro X-Series 3XS is a 3-axis smartphone gimbal stabilizer with a unique foldable arm design that allows for easy storage and travel.The 3XS is unlike other smartphone gimbal stabilizers, as it allows for the gimbal to be folded up and carried with minimal storage space needed. The gimbal can fit easily in most bags or jacket pockets. This allows it to be carried most places. The Benro 3XS also features a barrier-less smartphone clamp. This design also allows the user to go between horizontal and vertical orientations automatically with the push of a button, and to access the smartphone ports in either mode. The smartphone clamp design also features both wired and wireless charging of your phone while the gimbal is powered on. Ideal for most smartphones, the 3XS features a 2000 mAh capacity battery which provides 24-hours of use. The 3XS will keep up with you during the most extensive days of shooting. With multiple customizable buttons, you can easily select and control your desired functions with each button by using the companion smartphone app. By pressing down on one of the customizable buttons, you can switch between features such as Roll Following, Face Tracking, automatic rotation of your phone's orientation from 180 to 90 degrees, and more. The handle also features a trigger button which will allow you to either use Universal Follow Mode (default) or Locked-down mode (trigger depressed). With Universal Follow Mode, it provides smooth camera movements towards the direction you're aiming. You would use this mode when circling around a subject or making several dynamic camera movements following a subject. Locked-down mode keeps the camera locked on a subject while moving the gimbal. With this mode you can replicate movements similar to a jib or slider. By using the directional button in conjunction with these modes, you can flawlessly control your movements. The threaded receiver allows for additional attachments, giving you even more flexibility with your shots. The companion smart phone app allows you to calibrate your 3XS, adjust parameters, update the firmware, create a panorama, or create a beautiful time-lapse with dynamic motion.For advanced smartphone camera control, you can directly operate the photo shutter/focus, video record, and zoom making filming more convenient.The underside of the Benro 3XS handle has a 1/4"-20 threaded hole for mounting the stabilizer to a tripod or using desired mounted accessories. This allows you to use the 3XS handsfree during Panorama or Motion time-lapse modes, as well as during Object or Face Tracking modes. Finally, the 3XS offers the ability to use an external microphone without interfering with the operation of the gimbal. With the included 3.5mm audio cable and built in passthrough, you can mount any compatible 3.5mm (TRRS) microphone onto the handle of the gimbal for high quality audio recording directly to your smartphone.The Benro 3XS is ideal for most smartphones in the market today. Boost your production value while traveling light and compact with the X-Series 3XS Stabilizer.FeaturesCollapsible Gimbal Arm: The collapsible gimbal arm allows for easy and compact gimbal storage. Long Battery Life: The 3XS will last for 24 hours on a single charge. Smartphone App: Use the 3XS with the Benro Gimbals smartphone app. The 3XS can also be used without the app following activation. Wireless charging: The 3XS supports wireless charging on smartphones that support it.Automatic orientation change: The 3XS will go from horizontal to vertical and vice-versa with the single push of a button. No adjustment or rebalancing needed.
