Server - Accessories
Marketing InformationThe Bogen Model GSTRC, Security Cover prevents tampering with the controls of your GS series amplifiers.
Bogen Classic Series Amp 20 wa
- Bogen Classic Series Amp 20 watt- Accomodates low-impedance microphones and high-impedance auxiliary sources- 2 low-impedance balanced microphones or 1 microphone and 1 auxiliary input- The AUX input can be muted when a customer-supplied SPST normally open switch is used for microphone precedence- Independent volume controls and a treble control for tonal balance
1W Self Amplified Wall Baffle
- 8" cone speaker for excellent audio quality- Self-contained 1W amplifier- Built-in volume control- Interfaces with 600ohm telephone line- 3/8" particle board construction- Simulated walnut finish- Easy wall mount installation
Dynamic Gooseneck Microphone
- Cardioid pickup pattern- Outstanding speech intelligibility, feedback rejection, and user sound isolation- High sound pressure capability and low sensitivity to breath/pop noise- Rugged, reliable construction- Integral multi-layer breath/wind filter- Durable all-metal case with non-glare black finish- Silent push-on/push-off talk switch on base
Tile Bridge Support Ring
- Supports weight of speakers installed in suspended ceilings- Use with clamping type ceiling speakers
2X2 AMPLIFIED CEILING SPEAKER
- For use with both 2 ft. x 2 ft. and 2 ft. x 4 ft. suspended tile ceilings (support rail crossbar included for 2 ft. x 4 ft. suspended tile ceilings)- Finely perforated grille covers entire front of speaker- Fully enclosed, industrial grade steel construction- Self-contained 1-watt amplifier- 8" main cone speaker, with secondary cone- Front-mounted, recessed volume control- Non-reflective finish, off-white- Seismic attachment points- Plenum-Rated; Complies with UL-2043
Bogen Orbit Ops1 Pendant Speaker - Passive Speaker - Cable - Dark Gray (ops1b)
Bogen Orbit Ops1 Pendant Speaker - Passive Speaker - Cable - Dark Gray (ops1b) condition: New Brand: BogenMPN: BG-OPS1BMPN: BGOPS1B
60W amplifier
- 3 models: 35, 60, and 100 watts- 4 inputs: 1 MIC, 1 AUX, 1 TEL, plus 1 selectable MIC or AUX- Each input controlled by an independent volume control- Treble and bass controls- AUX muting by external contact closure for push-to-talk microphones- TEL input for telephone paging applications- TEL input voice-activated (VOX) mute over AUX input- Variable threshold for TEL input voice-activated AUX mute- Outputs for 4-ohm (direct), 8-ohm (C35 & C60 models only), and 16-ohm, 25V and 70V speaker systems (transformer coupled)- Output jack to connect a recording device or booster amplifier- Output jack to connect a general-purpose 600-ohm matching transformer (model WMT1A)- Thermal protection and electronic shutdown- Rack mountable with accessory mounting kit (model RPK50)- Listed to UL standard 60065 for US and Canada
2 PK 1X2 Drop Ceiling Speaker BRIGHT WH
- 1ft X 2ft drop in ceiling speaker in bright white- Fast and easy installation- Finely perforated grille over the entire front of speaker- Fully enclosed, industrial grade steel construction- Enclosed back can- 8" main cone with secondary high-frequency cone- 70V/25V, 4-watt transformer (4, 2, 1, 0.5, 0.25 watt) taps; selected by rotary switch- Seismic attachment point- "VR" versions have a Recessed Volume Control (front-mounted)- Listed to UL Standard 1480 for U.S. use- Support Rail Crossbar (included)
CONNECTOR KIT 22 GAUGE 30 PCS
- Bogen connector kit- 22 Gauge- 30 Pieces- BG2522- Accessory to Intercom Control Center models PI35A and SI35A
30 Watt ReEntrant Horn Loudspeaker
- High intelligibility and efficiency; ideal for both one-way and talk back applications- Weatherproof, all-metal construction- 30 watts; 25/70 volt or 8-ohm operation- Tap settings for 70V: 30, 15, 7.5, 3.7, 1.8 watts; for 25V: 15, 7.5, 3.7, 1.8 watts- Rotary tap impedance selector on SPT30A- Tilt and swivel base for easy positioning- Screw terminals make installation fast and easy- All-purpose mounting bracket- Self-aligning, field replaceable diaphragm- Textured mocha enamel finish- Limited lifetime warranty- Mountable to I-beam flange using Bogen’s BC1 Beam Clamp (sold separately)- Mountable to electrical box using Bogen’s HSES10 mounting strap (sold separately)- Terminal Cover (TCSPT1) allows connection of conduit fittings to horn speakers (sold separately)
10W Classic Amplifier
- Bogen classic amplifier- 10 Watts- Offers dependable performance and flexibility- UL and CSA listed- Designed with discreet complementary transistor circuitry to assure maximum reliability of power output stages- Transformer isolated 4., 8., 16., 25V and 70V output taps- Rear panel auxiliary receptacle- One dedicated MIC 1 input Lo-Z balanced- One switchable MIC 2/AUX 1 input- Contact muting of AUX input- Separate rear panel-mounted TEL volume control- Voice activated muting of AUX input by Tel input- Variable trigger threshold for voice activation- Optional wall mount kitBGC10
Signal Level Control
- Bogen speaker signal level control- Remotely control the volume of up to 150 self-amplified speakers- Rugged and attractive stainless steel plate with engraved lettering- Mounts in a single gang electrical box- Easy and secure terminal strip connections- Passive (requires no DC power)- BGSLC
s86t725pg8w speaker w/o volume
SPKR W/TRANS ON OFF-WHITE GRILL
Bogen 2X2 AMPLIFIED CEILING SPEAKER ACD2X2
Bogen 2X2 AMPLIFIED CEILING SPEAKER ACD2X2 condition: New MPN: ACD2X2Brand: BogenModel: ACD2X2
Bogen A A12 Home Audio Speaker
The NEAR A12 High-Output, Long-Throw Loudspeaker is the latest addition to the A-Series family of loudspeakers. Engineered to the same high standards, the A12 provides deep, rich bass and smooth highs as a complement to other NEAR loudspeakers. Product Type: Speaker Impedance: 16 Ohm Sensitivity: 95 dB Product Type: Speaker Impedance: 16 Ohm Manufacturer Part Number: A12 Sensitivity: 95 dB Color: Black Driver Type: 6.50 Driver Type: 1.90 Mylar Form Factor: Wall Mountable Color: Black Driver Type: 6.50 Woofer Driver Type: 1.90 Mylar Tweeter Form Factor: Wall Mountable Manufacturer: Bogen Communications International, Inc Product Model: A12 Product Name: NEAR A12 Speaker Product Line: NEAR Brand Name: Bogen Product Series: A Brand Name: Bogen Height: 17.9 Width: 10.3 Depth: 10.5 Crossover Type: 2-way Minimum Frequency Response: 50 Hz Maximum Frequency Response: 17.50 kHz RMS Output Power: 200 W Product Family: NEAR A Crossover Type: 2-way Minimum Frequency Response: 50 Hz Maximum Frequency Response: 17.50 kHz RMS Output Power: 200 W
Bogen Easy Install Speaker w/ Single Tap
Direct and reflected sound paths create wide dispersion angle Complies with NFPA National Code 160b and UL 2043 Fast easy clean installation Lightweight and durable plastic shell with a paintable off white finish Bogen Easy Install Speaker w/single tap 1W
Bogen S86T725PG8W 4W Capacity 8" Cone Speaker White BG-CEILING
Bogen S86T725PG8W 4W Capacity 8" Cone Speaker White BG-CEILING condition: New Shape: RoundModel No.: BG-ASWG1DKModel: BG-ASWG1DKCountry/Region of Manufacture: ChinaType: 8" cone speakerRMS Power: 4W capacityColor: WhiteConfiguration: 8" cone speakerBrand: Bogen CommunicationsManufacturer Color: WHITEConnectivity: WiredMPN: S86T725PG8W
Bogen Wall Baffle Speaker Walnut
Bogen Wall Baffle Speaker Walnut
Bogen 75W 8 Ohm High-Performance Loudspeaker S4B
Bogen 75W 8 Ohm High-Performance Loudspeaker S4B condition: New MPN: S4BBrand: BogenModel: S4B
Bogen AMT-12 Home Audio Speaker
Bogen AMT-12 Home Audio Speaker
Bogen S4T Home Audio Speaker
The S4 & S4T compact, versatile speakers feature NEAR's unique driver technologies to produce the highest sound quality in the most durable and reliable loudspeakers available. Precise sound reproduction is achieved with mid/bass drivers employing NEAR's MDTTM and patented MLSTM technologies for superior sound and long-term durability. The high-frequency driver is a 1 titanium diaphragm which perfectly complements the metal-alloy LF driver. A built-in 16W transformer (S4T) makes it compatible with 70V sound systems. The S4T speaker can switch between 70V or low-impedance systems by using a power tap selection switch. NEAR's patented spiderless technology (MLSTM) and advanced materials deliver out-of-the-box performance year after year. Package Contents: NEAR S4T Speaker Color Matched Mounting Bracket Product Type: Speaker Impedance: 8 Ohm Product Type: Speaker Impedance: 8 Ohm Manufacturer Part Number: S4TW Limited Warranty: 5 Year Weight (Approximate): 5.75 lb Color: White Driver Type: 4.50 Cone Driver Type: 1 Titanium Color: White Driver Type: 4.50 Cone Woofer Driver Type: 1 Titanium Tweeter Manufacturer: Bogen Communications International, Inc Product Model: S4T Product Name: NEAR S4T Speaker Product Line: NEAR Brand Name: Bogen Brand Name: Bogen Height: 8.3 Width: 5.3 Depth: 7.4 Crossover Type: 2-way Minimum Frequency Response: 58 Hz Maximum Frequency Response: 18 kHz RMS Output Power: 75 W Product Family: NEAR Crossover Type: 2-way Minimum Frequency Response: 58 Hz Maximum Frequency Response: 18 kHz RMS Output Power: 75 W
Bogen Ceiling Speaker S86T725PG8WVK
Bogen Ceiling Speaker S86T725PG8WVK
3 Pcs Aluminum Alloy Thumbscrews for GoPro Hero 2018, GoPro Fusion, GoPro Hero 8/7/6/5/4/3/2/1 and DJI Osmo Action, 8 Colors, Very Durable, Standard C
***** **********Best Quality Guranteed. *****[Wide Compatibility]: Compatible with GoPro HERO 2018, GoPro Fusion, GoPro HERO 8 / HERO 7 / HERO 6 / HERO 5 / HERO 4 / HERO 3+ / HERO 3 / HERO 2 / HERO 2 HD / HERO 1 and DJI Osmo Action. *****[Made of Aluminum Alloy]: High Quality Aluminum Alloy Thumbscrew. Our aluminum alloy screw made by high-strength and high-precision CNC processing technology, so you don't have to worry about rust or corrosion. *****[Very Durable]: The surface of our aluminum alloy screws is treated with a special technique, which is very wear-resistant and durable. You can keep the prototype no matter how long you use it. You can even use our products instead of original GoPro screws. *****[Other Accessories]: Each screw has a small rubber O-ring at the base that helps to keep the pressure on the screw, resulting in consistent fastening without the need for thread locker materials. *****[Product List]: 1 X Long Aluminum Alloy GoPro Thumbscrew Set. Length: 5.75 CM / 2.26
ONE-WAY AMPLIFIED HORN/15-WATT
ONE-WAY AMPLIFIED HORN-15-WATT
Surveillance - Accessories
BOGEN RPK84 RCK MNT KT,PCM2000 SYSTEM
bogen bg-wbs8t725v speaker baffle
Description:? -4-Watt Capacity6 Power Taps Available (4, 2, 1, 1/2, 1/4, 1/8 Watts)Works With Both 70V And 25V Amplifier OutputsSimulated Walnut FinishPre-Assembled For Faster Installation8 Cone Speaker For Excellent Audio Quality6 Oz Or 10 Oz Magnet WeightsRecessed Volume Control Available (V Models Only) Screw Terminals Available (Br Models Only) Easy Wall-Mount InstallationMounting Hardware Included
bogen wall baffle speaker - walnut
Bogen WB1EZ WALL BAFFEL, 1W, EASY DESIGN
Bogen OPS1 Orbit Pendant Speaker (Dark Gray)
The Orbit OPS1 Pendant Speaker is the ideal choice for high ceiling and open space environments. The OPS1 features NEAR's MLS and MDT technologies, which improve sound quality and increase operating reliability.Minimum Frequency Response: 45 HzMaximum Frequency Response: 19 kHzImpedance: 16 OhmColor: Dark GrayForm Factor: Ceiling MountableDepth: 9.3Diameter: 15"Weight (Approximate): 10 lbPackage Contents: Orbit OPS1 Pendant Speaker3 x Suspension Cables3 x Forged Eye Bolts3 x Nuts1 x Quick Snap Clip1 x Snap Lock Input ConnectorPackage ContentsOrbit OPS1 Pendant Speaker3 x Suspension Cables3 x Forged Eye Bolts3 x Nuts1 x Quick Snap Clip1 x Snap Lock Input Connector"
1W Self-Amplified Wall Baffle
Bogen ASWB1 - speaker
Bogen MB8TSQVR Home Audio Speaker
Bogen MB8TSQVR Home Audio Speaker
30 Watt Attenuator
The AT-Series of attenuators allows the output level of a network of 25V or 70V speakers to be controlled from a wall-mounted volume control, without affecting overall amplifier volume settings. The AT10A can handle speaker loads of up to 10W and the AT35A can handle speaker loads of up to 35W. Volume reduction takes place in 3 dB increments except for the two lowest settings, which provide 6 dB reduction increments. These rugged attenuators have 10 levels of sound control, plus an off setting. Form Factor: Wall MountableHeight: 4.8W idth: 4.8"D epth: 2.5"L imited Warranty: 2 Year"
Speaker MIC for ATD878868 Series DMRAnalog Radio Also for Kenwood K Type Connector Walkie Talkie Radio
AnyTone Handheld Speaker MIC for Digital and Analog radio - Brand new and high quality - 3.5 mm earphone socket on the underside. - Back with a strong clip and convenient for use. - Pin Size: 1 x 3.5 mm, 1 x 2.5 mm. - Color: Black Compatible Models: AnyTone AT-D878UV Plus AnyTone AT-D878UV AnyTone AT-D868UV And other Kenwood K type Speaker MIC connector radio. Specification: Speaker: Size: 36mm ( 1.42 in Inches) SPL: 140dB + / - 2dB Frequency: 420Hz -20kHz Impedance: 8 ohm + / - 15 percent Audio: 1W Microphone: Type: omnidirectional Frequency: 100Hz 160kHz Sensitivity: -54dB + / - 2dB Impedance: 2.2K ohm Voltage: DC 1 - 10V Product Weight: 5oz (135g) Product Size (L x W x H): 3 x 2.25 x 1.25 inches Package Contents: 1 x AnyTone Speaker Mic
2 PACK Speaker Ceiling 2x2 w volume
- Bogen 2 pack of ceiling speakers- 95Hz - 20kHz Frequency response- 94dB SPL @ 1W / 1m- 100 Degree dispersion @ 2kHz (6dB down)- Treated paper cone- 8" Main cone with secondary high frequency cone- 10oz Magnet weight- Connection via wire nuts- Off-white finish- Back can- Recessed volume control- Speaker assembly will fit into 2' x 2' and 2' x 4' ceiling tilesBGCSD2x2VR
Bogen Communications DDU250 Bogen Microphone
Dynamic Desktop Microphone has 16 in. long, fully flexible gooseneck stalk shock-mounted to a heavy zinc die-cast base. Cardioid pickup pattern and Push-to-lock & push-to-talk switches.SpecificationsHeadphones Type - MicrophoneMicrophone Technology - DynamicConnectivity Technology - WiredImpedance - 500 OhmResponse Bandwidth - 100 - 12000 HzSignal-To-Noise Ratio - 76 dBCables Included - Microphone cable - 10 ft.Included Accessories - Microphone standItem Weight - 3 lbs.
15 Watt Horn with Transformer
- High intelligibility and efficiency; ideal for both one-way and talk back applications- Weatherproof, all-metal construction- 15 watts; 25/70 volt (SPT15A)- Tap settings for 70V: 15, 7.5, 3.8, 1.8, 0.9 watts; for 25V: 15, 7.5, 1.8, 0.94, 0.46 watts- Rotary tap impedance selector on SPT15A- Tilt and swivel base for easy positioning- Screw terminals make installation fast and easy- All-purpose mounting bracket- Self-aligning, field replaceable diaphragm- Mocha enamel finish- Limited lifetime warranty- Mountable to I-beam flange using Bogen’s BC1 Beam Clamp (sold separately)- Mountable to electrical box using Bogen’s HSES10 mounting strap (sold separately)- Terminal Cover (TCSPT1) allows connection of conduit fittings to horn speakers (sold separately)
35 WATT AMPLIFIER
- Bogen C35 Classic series amplifier- 35 Watts output- 4 inputs: 1 MIC, 1 AUX, 1 TEL, 1 MIC/AUX- Mic precedence circuit- Telephone paging inputBGC35
bogen - 1w self-amplified wall baffle
Bogen ASWB1 AMPLIFIED SPEAKER WALL BAFFLE
Bogen CSD1X2/U Drop-In Ceiling Speaker Pair 1 x 2 ft. White
Bogen CSD1X2/U Drop-In Ceiling Speaker Pair 1 x 2 ft. White condition: New Brand: BogenMPN: CSD1X2/U
12VDC, 300MA POWER SUPPLY REQUIRED WITH VAR1
Bogen Communications PRS40C 12VDC, 300MA POWER SUPPLY REQUIRED WITH VAR1
WALL BAFFLE SPK AND XFMR ASSY
- 4-watt capacity- 6 power taps available (4, 2, 1, 1/2, 1/4, 1/8 watts)- Works with both 70V and 25V amplifier outputs- Simulated walnut finish- Pre-assembled for faster installation- 8" cone speaker for excellent audio quality- 6 oz. or 10 oz. magnet weights- Recessed volume control available (V models only)- Screw terminals available (BR models only)- Easy wall-mount installation- Mounting hardware included
POWER SUPPLY 24V
- 24V DC/ 2.5A Power Supply
Bogen 10 Watt Attenuator Single Gang
- Adjusts loudspeaker output levels on 25V and 70V systems- 2 models control up to 10-watt or 35-watt speaker systems- 10 attenuation steps and an off setting- Mounts in standard electrical box- Simple connections
Bogen Wall Baffle Speaker - Walnut
Bogen WB1EZ WALL BAFFEL, 1W, EASY DESIGN
PWR SUPPLY 24V 3 WIRE
- Bogen loop start interface/power supply- 24V talk battery supply for loop start ports- Buffered audio output for up to 25 self-amplified speakers- 450 mA, 24V DC power supply for external equipment- Integral flange and rubber feet for wall or shelf mounting- 6 Terminal barrier strip- UL and C-UL listedBGPRSLSI
ASM1 Easy Install Self-Amplified Speaker
The Bogen ASM1 Easy Install Self-Amplified Speaker is a surface-mount speaker, designed to typically install in less than a minute. Installation is a simple, three-step process that does not require tools.Minimum Frequency Response: 125 HzMaximum Frequency Response: 15 kHzImpedance: 2 Kilo OhmForm Factor: Ceiling MountableHeight: 3Diameter: 9.5"Weight (Approximate): 2 lbPackage Contents: ASM1 Easy Install Self-Amplified SpeakerMounting HardwarePackage ContentsASM1 Easy Install Self-Amplified SpeakerMounting Hardware"
Bogen ACD2X2CA
Marketing InformationBogen's ACD2X2 Drop-In Ceiling Speaker is a full-range, 1-watt, self-amplified speaker that is quick and easy to install" Simply wire it and drop it into place"
LINE XFMR 500 OHM 57 4188 01
- Hi-Z, 10k-ohm primary impedance- Lo-Z, 600-ohm secondary impedance, balanced with center tap- Matches high-to-low impedance or low-to-high impedance- Adapts line-level signals to microphone inputs- RCA connector for Hi-Z side- Screw terminals for Lo-Z side- Small steel enclosure with mounting ears allows easy mounting- No wiring or soldering required- May be used to provide a 600-ohm output from a Bogen mixer/pre-amplifier
Bogen DDU250 Desktop Microphone
Bogen DDU250 Desktop Microphone condition: New Model: DDU250Brand: Bogen CommunicationsType: Dynamic MicrophonePickup Pattern: CardioidMPN: DDU250MPN: DDU250
Bogen Communications S86T725PG8U SPKR, W/BRIGHT WHITE GRILLE
Bogen Communications S86T725PG8U SPKR, W/BRIGHT WHITE GRILLESPKR, W/BRIGHT WHITE GRILLE MPN:S86T725PG8U765368480900
Bogen MPS1 Home Audio Speaker
The Bogen MPS1 Mini Pendant Speaker is an excellent choice for high ceiling and open space environments. The speaker's acoustic design delivers superb articulation and high intelligibility where paging and music applications are required. The sound performance technology is wrapped in an attractive, compact, contemporary cabinet enclosure. Package Contents: MPS1 Speaker 1 x Quick-connect Input Plug Product Type: Speaker Impedance: 16 Ohm Sensitivity: 85 dB Product Type: Speaker Impedance: 16 Ohm Manufacturer Part Number: MPS1B Sensitivity: 85 dB Limited Warranty: 2 Year Weight (Approximate): 4.50 lb Color: Black Driver Type: 4.50 Cone Form Factor: Ceiling Mountable Color: Black Driver Type: 4.50 Cone Form Factor: Ceiling Mountable Manufacturer: Bogen Communications International, Inc Product Model: MPS1 Product Name: MPS1 Speaker Brand Name: Bogen Brand Name: Bogen Diameter: 12 Height: 7.9 Minimum Frequency Response: 50 Hz Maximum Frequency Response: 14 kHz RMS Output Power: 50 W Minimum Frequency Response: 50 Hz Maximum Frequency Response: 14 kHz RMS Output Power: 50 W
Bogen FG FG15 Home Audio Speaker
Bogen FG FG15 Home Audio Speaker
S86T725PG8WVR Speaker w Volume
Speaker Type: Speaker Form Factor: Ceiling Mountable Maximum Frequency Response: 12 kHz Minimim Frequency Response: 50 Hz RMS Output Power: 4 W 4W capacity~~8" cone speaker for excellent audio quality ~~ & bull; 6 power taps available (4W 2W 1W~~1/2W 1/4W 1/8W) ~~ & bull; Available with recessed or knob volume control ~~ & bull; Pre-assembled for faster installation ~~ & bull; Off-white or bright white enamel over steel grille ~~ & bull; For 70V & 25V systems ~~
BOGEN COMMUNICATIONS WBS8T725V SPEAKER BFL ASSEMBLY by Bogen
BOGEN COMMUNICATIONS WBS8T725V SPEAKER BFL ASSEMBLY by Bogen4 watt capacity6 power taps available 4 2 1 1/2 1/4 1/8 watts Works with both 70V and 25V amplifier outputsSimulated walnut finishPre assembled for faster installation8 cone speaker for excellent audio quality6 oz or 10 oz magnet weightsRecessed volume control available V models only Screw terminals available BR models only Easy wall mount installationMounting hardware included
5 PK SM1EZ and SM4T TILE BRIDGE
- Bogen 5 pack - SM1EZ and SM4t tile bridge- BGSMTB
Orbit Pendant Speaker - Black
- Wide dispersion coaxial driver for broad, even 140° coverage- Stable, high definition metal-alloy cone- MDT cone design delivers detailed sound- MLS eliminates conventional centering “spider” for more accurate voice coil centering- High-efficiency drivers deliver superior performance- Extremely good off-axis response- Computer-matched venting system for full bass output- High power handling capability for foreground sound- Selectable power taps via front-mounted control- 16-ohm input for non-transformer multi-speaker systems- Easy wiring with snap-on connector- Connector provides loop-through to next speaker- Easy to use cable suspension system that includes three 13 inch long color-matched suspension cables with attached forged eyebolts- Threaded brass insert point for optional safety cable eye bolt- Low-resonance cabinet structure- Off-white or dark gray textured finish; easily painted to match theme decors- Attractive, contemporary, sturdy steel grille assembly with fine perforations- Listed to UL Standard 60065 for US and Canada- Accessory 10-foot long cable kit for use as main drop cable or safety cable (Model CK10 sold separately)
Bogen BG-RPKUTI1 Rack Unit Telephone Interface
- Rack Mount & Security Cover for UTI1- The RPKUTI1 Rack Mount and Security Cover provides protection against tampering of the UTI1 settings and connections and offers the option of rack mounting the UTI1. Knockout sections on both the cover and the rack ears are provided to facilitate wire entry and exit.
Bogen BG-SPT5A 7 5Watt Paging Speaker
- Maximum speaker power capacity of 7.5W- Rotary switch-selected power taps on transformer models- Consisten voltage (70V/25V) and 8-ohm versions- Tilt & swivel base for easy aiming- All metal construction with enamel finish- Weatherproof design
BOGEN BOG#BGPCMTIM TELEPHONE INTERFACE MODULE
BOGEN BOG#BGPCMTIM TELEPHONE INTERFACE MODULEMPN:BOG#BGPCMTIMUPC:082829985805-Incorporates a universal interface so that connection to any telephone system is rapid and trouble free.Connects to the PCM2000 telephone system via a standard RJ11 plugEquipped with 3 RJ11 jacks for Override, Page Port/Trunk, and 90V Night Ring/Station MPN:BG-PCMTIM765368200294
Bogen S86T725PG8WBR Home Audio Speaker
Bogen S86T725PG8WBR Home Audio Speaker
