Duronic DM351X3 Single LCD LED Desk Mount Arm Monitor Stand Bracket with Tilt & Swivel (Tilt ±15°|Swivel 180°|Rotate 360°)
OPTIMIZE WORK LIFE AND INCREASE EFFICIENCY - The Duronic DM351X3 is a monitor stand that will hold 1 monitor on the monitor arm in a horizontal or vertical position. Having you monitors mounted on a Duronic desk mount will free up space on the desk which now can be used for other valuable proposes. HEALTH BENEFITS & INCREASED PRODUCTIVITY - Problems with low level monitors is the fact that in many cases the monitor is below the required eye level for optimum body posture, what the Duronic monitor stand does is allow the user to adjust the stand based on the height of the user to find the best height for each individual. Having the monitors at the correct height will reduce neck and back pain and have a positive impact on your productivity. ULTIMATE FLEXIBILITY & OPTIMUM VIEWING ANGLES - The Duronic monitor arm stand is fully adjustable, which gives great flexibility in positioning your monitor. Depending on the screen size you will be able to position the monitors closer to you or away from you with the articulating arm, adjust the height on the clamp mounted pole; you can also tilt, swivel and rotate the monitor. Please see movement image and data table for more information. COMPATIBLE WITH VESA MONITORS - This monitor stand is suitable for most major branded monitors you find on the market who adhere to VESA compatibility. This monitor mount will support all monitor sizes between 13" to 27". VESA 100 or VESA 75 mounting hole compatible (the horizontal and vertical distances of the holes at the back of the TV must be 10 or 7.5 cm). Instruction manuals provided, and the stand can be up in between 10 minutes as the unit comes with most parts assembled. SOLID CONSTRUCTION & BUILT TO LAST - This monitor stand is made of steel and can support monitors up to 8kg. You mount the unit at the back of the desk with a clamp. If there is no space at the back of the desk, you can purchase a Duronic grommet to enable you to mount it on the top of the desk via a hole, or use the cable management hole that is available on most office desks. All fitting accessories provided.
Duronic DM251X3 PC Monitor Arm Stand Desk Mount Bracket Clamp Single LCD | LED |13"-27" (Tilt ±45°|Swivel 90°|Rotate 360°)
OPTIMIZE WORK LIFE AND INCREASE EFFICIENCY - The Duronic DM251X3 is a monitor stand that will hold 1 monitor on the monitor arm in a horizontal or vertical position. Having you monitors mounted on a Duronic desk mount will free up space on the desk which now can be used for other valuable purposes. HEALTH BENEFITS & INCREASED PRODUCTIVITY - Problems with low level monitors is the fact that in many cases the monitor is below the required eye level for optimum body posture, what the Duronic monitor stand does is allow the user to adjust the stand based on the height of the user to find the best height for each individual. Having the monitors at the correct height will reduce neck and back pain and have a positive impact on your productivity. ULTIMATE FLEXIBILITY & OPTIMUM VIEWING ANGLES - The Duronic arm monitor stand is fully adjustable, which gives great flexibility in positioning your monitor. Depending on the screen size you will be able to position the monitors closer to you or away from you with the articulating arm, adjust the height on the clamp mounted pole, you can also tilt, swivel and rotate the monitor. Please see movement image and data table for more information. COMPATIBLE WITH VESA MONITORS - This monitor stand is suitable for most major branded monitors you find on the market who adhere to VESA compatibility. This monitor mount will support all monitor sizes between 13" to 27". VESA 100 or VESA 75 mounting hole compatible (the horizontal and vertical distances of the holes at the back of the TV must be 10 or 7.5 cm). Instruction manuals provided, and the stand can be up in between 10 minutes as the unit comes with most parts assembled. SOLID CONSTRUCTION & BUILT TO LAST - This monitor stand is made of steel and can support monitors up to 8kg. You mount the unit at the back of the desk with a clamp. If there is no space at the back of the desk, you can purchase a Duronic grommet to enable you to mount it on the top of the desk via a hole, or use the cable management hole that is available on most office desks. All fitting accessories provided.
Duronic DM251X2 PC Monitor Arm Stand Desk Mount Screen Bracket Clamp Single LCD | LED |13"-27" (Tilt ±45°|Swivel 90°|Rotate 360°)
OPTIMIZE WORK LIFE AND INCREASE EFFICIENCY - The Duronic DM251X2 is a monitor stand that will hold 1 monitor on the monitor arm in a horizontal or vertical position. Having you monitors mounted on a Duronic desk mount will free up space on the desk which now can be used for other valuable purposes. HEALTH BENEFITS & INCREASED PRODUCTIVITY - Problems with low level monitors is the fact that in many cases the monitor is below the required eye level for optimum body posture, what the Duronic monitor stand does is allow the user to adjust the stand based on the height of the user to find the best height for each individual. Having the monitors at the correct height will reduce neck and back pain and have a positive impact on your productivity. ULTIMATE FLEXIBILITY & OPTIMUM VIEWING ANGLES - The Duronic arm monitor stand is fully adjustable, which gives great flexibility in positioning your monitor. Depending on the screen size you will be able to position the monitors closer to you or away from you with the articulating arm, adjust the height on the clamp mounted pole, you can also tilt, swivel and rotate the monitor. Please see movement image and data table for more information. COMPATIBLE WITH VESA MONITORS - This monitor stand is suitable for most major branded monitors you find on the market who adhere to VESA compatibility. This monitor mount will support all monitor sizes between 13" to 27". VESA 100 or VESA 75 mounting hole compatible (the horizontal and vertical distances of the holes at the back of the TV must be 10 or 7.5 cm). Instruction manuals provided, and the stand can be up in between 10 minutes as the unit comes with most parts assembled. SOLID CONSTRUCTION & BUILT TO LAST - This monitor stand is made of steel and can support monitors up to 8kg. You mount the unit at the back of the desk with a clamp. If there is no space at the back of the desk, you can purchase a Duronic grommet to enable you to mount it on the top of the desk via a hole, or use the cable management hole that is available on most office desks. All fitting accessories provided.
Duronic DM653 Gas Powered Triple LCD LED Desk Mount Arm Monitor Stand Bracket with Tilt and Swivel (Tilt -90°/+85°|Swivel 180°|Rotate 360°)
OPTIMIZE WORK LIFE AND INCREASE EFFICIENCY - The Duronic DM653 is a Gas desktop mount for 3 monitor or 3 lightweight LCD TV's. Our Gas powered models provide the highest level of flexibility and movement as it does not depend on a minimum weight to be installed onto the mount. The stand will allow you to put on a monitors of weight between 0kg - 8kg. Having your monitors mounted on a Duronic monitor mount will free up space on the desk which now can be used for other valuable proposes. HEALTH BENEFITS & INCREASED PRODUCTIVITY - Problems with low level monitors is the fact that in many cases the monitor is below the required eye level for optimum body posture, what the Duronic monitor stand does is allow the user to adjust the stand based on the height of the user to find the best height for each individual. Having the monitors at the correct height will reduce neck and back pain and have a positive impact on your productivity. ULTIMATE FLEXIBILITY & OPTIMUM VIEWING ANGLES - The Duronic monitor stand has fully adjustable arms which gives great flexibility in positioning your monitor. Depending on the screen size you will be able to position the monitors closer to you with the articulating arm, move monitors together or away from each other, adjust the height on the clamp mounted pole, you can also tilt, swivel and rotate each monitor. Please see movement image and data table for more information. COMPATIBLE WITH VESA MONITORS - This monitor stand is suitable for most major branded monitors you find on the market who adhere to VESA compatibility. This monitor mount will support all monitor sizes between 13" to 27". VESA 100 or VESA 75 mounting hole compatible (the horizontal and vertical distances of the holes at the back of the TV must be 10 or 7.5 cm). Instruction manuals provided, and the stand can be up in between 5-10 minutes as the unit comes with most parts already assembled. SOLID CONSTRUCTION & BUILT TO LAST -This stand will allow you to move the arms up or down and swivel right and left 360°, you can also turn the monitor around. (Please see size data image to establish if this stand will fit your Monitor. Please measure the width of your monitor against width our data) Changing positions are very easy to do and do not required any further tools. Extra strong clamp installed on the unit to provide excellent and secure stability.
Duronic Projector Mount PB03XB | Bracket Fixing for Ceiling | 30lbs Capacity | Universal | Heavy Duty | Fittings Included | Rotate 306 °, Swivel 40 °, Tilt 60° for Easy Projection Set-Up
The Duronic Projector mounts are designed for different sized projectors; we have a range of projector mounts to suit your needs. Our Models: BLACK COLOUR PB01XB PB02XL PB03XB PB04XL WHITE COLOUR PB05XB PB06XL SILVER \u2013 TOP END MODEL PB10XM Our range includes fixed ceiling and wall mounts along with mounts with extendable arms. Our projector mount are universal and fit a large variety of projector mounting patterns due to its clever mounting mechanism. The mount is compatible with mounting on wood, concrete or masonry walls. These projector mount will work with most popular projectors from the most popular brands on the market. The projector ceiling mount comes packed in a few parts along with manuals and full accessories. These parts are easy to assemble to each with simple Allen key which is supplied, making the installation easy and secure. Duronic universal projector mounts can be used to mount projectors that come with 3 and 4-hole mount patterns for use with nearly all projectors. The wall or ceiling bracket is screwed to the wall/ceiling with the hardware included in the package. Some models come with arm that is adjustable easily so you can achieve the correct positions required. This bracket has multiple grooves where the projector mount arms get attached. The bracket allows you to: Tilt up and down - Swivel left and right - Rotate All these movement position allows this wall mount projector bracket to be compatible with almost all the projectors in the market and give you the best viewing positions you require for optimal picture viewing. 2 Year Warranty Included
Duronic Monitor Stand DM053 | Screen Riser for Desktop | Clear Acrylic | Desk Support for a Laptop, TV Screen or PC Computer Monitor Screen | 30kg Capacity | 50cm x 20cm | For Home or Office
INCREASE THE HEIGHT OF YOUR SCREEN: Rise your laptop, monitor or television screen by 10cm. Our monitor risers have been fitted in thousands of offices worldwide and are helping customers to optimise their desk space and improve their posture. HEALTH BENEFITS: Poor posture - and consequently aches and pains - are often the result of how you are seated at your desk and in most cases making adjustments to improve your workspace to be ergonomically better isn’t too difficult. With our desk risers it couldn’t be easier to make a huge improvement just by making this one simple addition to your desktop. COMPATIBLE WITH PC MONITORS, TV’S AND LAPTOPS: All of our monitor stands are compatible with most monitor screens and small televisions. They can also be used to support a laptop, If you’re a gamer you may have an alternative use in mind. If you own a console (or more than one) you’ll know it’s a challenge to keep it all tidy. Thanks to Duronic you may have finally found a solution! EASY TO INSTALL: Our whole range of monitor risers are exceptionally easy to install as they require minimal assembly. No tools required, no heavy lifting to be done. By placing your monitor on top, it is naturally elevated to an optimal position for the user, whilst also cleverly creates space underneath the stand to put your keyboard/mouse/stationery away from sight. MADE WITH HIGH QUALITY MATERIALS: This monitor stand has is made from high quality acrylic and is 10mm thick. It will support anything up to 30kg in weight. The acrylic platform is 50cm x 20cm.
Duronic Monitor Stand DM051 | Screen Riser for Desktop | Black Tempered Glass | Desk Support for Laptop TV Screen or PC Computer Screen | 40kg Capacity | 63cm x 25cm | For Home, Office or Classroom
ADJUSTABLE TO THE HEIGHT YOU NEED: Rise your laptop, monitor or television screen by 11cm- 12.5 cm. Our monitor risers have been fitted in thousands of offices worldwide and are helping customers to optimise their desk space and improve their posture. HEALTH BENEFITS: Poor posture - and consequently aches and pains - are often the result of how you are seated at your desk and in most cases making adjustments to improve your workspace to be ergonomically better isn’t too difficult. With our desk risers it couldn’t be easier to make a huge improvement just by making this one simple addition to your desktop. COMPATIBLE WITH PC MONITORS, TV’S AND LAPTOPS: All of our monitor stands are compatible with most monitor screens and small televisions. They can also be used to support a laptop, If you’re a gamer you may have an alternative use in mind. If you own a console (or more than one) you’ll know it’s a challenge to keep it all tidy. Thanks to Duronic you may have finally found a solution! EASY TO INSTALL: Our whole range of monitor risers are exceptionally easy to install as they require minimal assembly. No tools required, no heavy lifting to be done. By placing your monitor on top it is naturally elevated to an optimal position for the user, whilst also cleverly creates space underneath the stand to put your keyboard/mouse/stationery away from sight. MADE WITH HIGH QUALITY MATERIALS: This monitor stand has is made from high quality tempered glass and is 8mm thick. It will support anything up to 40kg in weight. The platform has large tubular feet to make the unit extra sturdy and also creates more desktop space underneath it. The glass platform is 63cm x 25cm.
Duronic DMDC52 DualGas Desk Mount Arm Monitor Stand Bracket Powered Full Motion | LCD LED VESA Monitors | Desk Bracket with Tilt and Swivel (Tilt +90°/-45°|Swivel 180°|Rotate 360°)
OPTIMIZE WORK LIFE AND INCREASE EFFICIENCY - The Duronic DMDC52 is a desktop mount for 2 monitor. This model will provide the user with full motion fluid movement of the monitor with its gas powered mechanism which does not require any minimum weight, hence there is no tension adjustment required. Just install the unit on a table, mount the monitor and off you go. HEALTH BENEFITS & INCREASED PRODUCTIVITY - Problems with low level monitors is the fact that in many cases the monitor is below the required eye level for optimum body posture, what the Duronic monitor stand does is allow the user to adjust the stand based on the height of the user to find the best height for each individual. Having the monitors at the correct height will reduce neck and back pain and have a positive impact on your productivity. ULTIMATE FLEXIBILITY & OPTIMUM VIEWING ANGLES - The Duronic monitor stand has fully adjustable arms which give great flexibility in positioning your monitors. Depending on the screen size, you will be able to position the monitors closer to you with the articulating arm, and adjusting the height using the gas arms. Tilt, swivel and rotate the monitor to optimise your viewing angle. COMPATIBLE WITH VESA MONITORS - This monitor stand is suitable for most major branded monitors you find on the market which adhere to VESA compatibility. This monitor mount will support all monitor sizes between 13" to 24". VESA 100 or VESA 75 mounting hole compatible (the horizontal and vertical distances of the holes at the back of the TV must be 10 or 7.5 cm). Instruction manuals provided, and the stand can be up in between 10 minutes as the unit comes with most parts assembled. SOLID CONSTRUCTION & BUILT TO LAST - This monitor stand is made of steel and can support monitors up to 6.5 kg. You mount the unit at the back of the desk with a clamp. All fitting accessories are included. If you need to grommet mount the monitor arm, please get in touch with Duronic so we can advise you the correct grommet to purchase.
Duronic Desk Mount DM65L1X1 | Single Monitor Stand for 15”-27” LCD/LED PC/TV Screen and Laptop | Dual Arms | Adjustable Support | VESA 75/100 Bracket (Tilt: -90°/+85° | Swivel: 180° | Rotate: 360°)
SPACE SAVING SOLUTION: Having a computer monitor and a laptop or tablet on your desk can take up a lot of space. One of the great advantages of having a screen support like the DM65L1X1 is that it takes up very little room on your table top; by elevating the screen and laptop it also frees up valuable space which enables you to utilise it for more important things. Our DM65 range is the most superior in adjustable ability and aesthetics. If you’re looking for the best, you’ve found it. HEALTH BENEFITS AND INCREASED PRODUCTIVITY: Most stand-alone monitors and laptops are low-levelled and as such they can cause a problem for most people as they are positioned below the user’s natural line of sight. When a screen is not positioned properly it can have a negative effect on the user’s posture, wellbeing and productivity. This desk mount allows the user to adjust the stand based on their own height and position, enabling them to work comfortably without aches and pains. ULTIMATE FLEXIBILITY AND OPTIMAL VIEWING ANGLES: This monitor stand is fully adjustable, both in height and in the position or angle of the arms. The arms can be adjusted forward/backward, up/down, move left to right and rotate 360°. You can also push the screen back to be almost flush with the pole, which is handy when not in use. The head fitting can swivel left/right and can rotate 360° allowing you to view the monitor vertically. COMPATIBLE WITH VESA MONITORS: This monitor stand is suitable for most major brand monitors on the market (i. e. Samsung, LG, Dell, to name a few) who adhere to VESA compatibility. This mount will support screens 15”-27” in size and with a maximum weight of 8kg. The VESA bracket will hold monitors with VESA 100 or VESA 75 mounting holes; this means that the holes should be either 100mm or 75mm apart from each other when measured. FEATURES & SPECIFICATIONS: This model has two arms that can swivel in 3 places by 180°, both VESA heads tilt +85°/-90° and can turn 360°. Pole height: 40cm. Maximum weight capacity: 8kg per arm. Colour: silver/black. Material: steel. Fixings are included. If you require an extra VESA bracket, arm or grommet for your set-up, you can also purchase this separately. Included in the box is an instruction manual to provide a step-by-step guide to installing the desk mount.
Duronic DMDCL1X1 Monitor Arm Stand | Dual Twin PC Desk Mount | Height Adjustable | For 15-27 Inch LED LCD Screen and Laptop | VESA 75/100 | 8kg Capacity | Tilt +90°/-45°, Swivel 180°, Rotate 360°
OPTIMIZE WORK LIFE AND INCREASE EFFICIENCY - The Duronic DMDCDML7 is a desktop mount for 2 monitor or 1 monitor and 1 laptop. This model will provide the user with full motion fluid movement of the monitor with its gas powered mechanism which does not require any minimum weight, hence there is no tension adjustment required. Just install the unit on a table, mount the monitor and off you go. HEALTH BENEFITS & INCREASED PRODUCTIVITY - Problems with low level monitors is the fact that in many cases the monitor is below the required eye level for optimum body posture, what the Duronic monitor stand does is allow the user to adjust the stand based on the height of the user to find the best height for each individual. Having the monitors at the correct height will reduce neck and back pain and have a positive impact on your productivity. ULTIMATE FLEXIBILITY & OPTIMUM VIEWING ANGLES - The Duronic monitor stand has fully adjustable arms which give great flexibility in positioning your monitors. Depending on the screen size, you will be able to position the monitors closer to you with the articulating arm, and adjusting the height using the gas arms. Tilt, swivel and rotate the monitor to optimise your viewing angle. This stand will allow you to move both monitor and Laptop up or down to find your perfect height whilst you stand a COMPATIBLE WITH VESA MONITORS - This monitor stand is suitable for most major branded monitors you find on the market which adhere to VESA compatibility. This monitor mount will support all monitor sizes between 13" to 24". VESA 100 or VESA 75 mounting hole compatible (the horizontal and vertical distances of the holes at the back of the TV must be 10 or 7.5 cm). Instruction manuals provided, and the stand can be up in between 10 minutes as the unit comes with most parts assembled. SOLID CONSTRUCTION & BUILT TO LAST - This monitor stand is made of steel and can support monitors up to 6.5 kg. You mount the unit at the back of the desk with a clamp. All fitting accessories are included. If you need to grommet mount the monitor arm (Grommet Mount sold separately), please get in touch with Duronic so we can advise you the correct grommet to purchase. Most of the parts are connected together so you have as little to do when you receive the item. Everything is packed into 1 box w
