Electro-Voice EVIDS12.1W 12 inch Subwoofer Cabinet (White)
The EVID-S12.1 subwoofer, from Electro-Voice, is a compact, high-performance, 12" (305 mm) woofer loudspeaker with outstanding performance for the most demanding professional and commercial sound applications. Designed and engineered for use in background and foreground music, and sound reinforcement applications, the EVID-S12.1 is the ideal solution for indoor and outdoor applications, such as restaurants, bars, patios, retail, fitness clubs, hospitality, theme parks, leisure venues, and others.
The 12.1 subwoofer & rsquo;s slot-loaded design allows for flexible mounting and placement while delivering the smoothest bass response possible.
The 12" high-excursion woofer, with its dual voice-coil design, enables both the left and right channels to feed into the speaker while providing crossed-over outputs for up to 4 satellite speakers at the same time.
If desired, the EVID-S12.1 can be powered separately for an even more powerful presence. The EVID-S12.1 features reinforced steel-fastener construction that allows for a variety of mounting configurations. The EVID-S12.1 is available in black or white, and can easily be painted to match the decor. All mounting hardware is included.
The wide range of EVID surface mount speakers has been designed to work together as a complete system in a variety of different surface mount constructions, and to be used in combination with other EVID ceiling and in-wall speakers.
Features:
High-excursion 12" woofer with dual voice coil to accommodate L & amp; R channels
200 W power handling provides for 127 dB maximum SPL (133 dB Peak)
Crossover input panel included
Color: White
electrovoice elx115p 15" live x twoway powered loudspeaker
Electro-Voice ELX115P 15" Live X Two-Way Powered Loudspeaker RepackUPC NO:886830778896 SKU:ADIB004M8BO1A
Electro-Voice EVA2082S/1220BLK Dual-Element 120x20 Deg Full-Range Line-Array Module (Black)
The Electro-Voice EVA Series (Expandable Vertical Array) is designed to provide full bandwidth, well defined coverage from easily created line arrays using four different preconfigured 2-way modules. Two vertical coverage angles, 6° and 20°, can be combined to create line arrays optimized for spaces ranging from 12m (40ft) to greater than 60m (200ft) deep. Two horizontal coverage angles, 90° and 120°, provide the perfect match for any width. Each module consists of two elements, each 2-way element containing an 8 & rdquo; woofer and two compression drivers mounted on a hydra/waveguide combination. High order passive networks couple the element & rsquo; s transducers, and the array element to additional elements to provide plane wave radiation and response equal to DSP-driven high end systems. Impedance management allows full array drive (up to 4 modules) from a single amplifier channel at 4 ohms. Matching subwoofer module is available when response below 50 Hz is required. EVA systems can be used in a variety of fixed installation applications where high quality sound reinforcement and even coverage are required from a compact, lightweight, unobtrusive array. EVA-2082 modules utilize four DH2005 high output 1.25 & rdquo; titanium compression drivers, mounted on two Hydra & reg; plane wave generators and two waveguides. The result is smooth response to 20 kHz and excellent pattern control in both planes. Features: True Line Array Performance 120° Horizontal Coverage Pattern 20° Vertical Coverage Pattern 104 dB Sensitivity Hidden Suspension Hardware (Included) is Architecturally Pleasing EVADA (EVA Design Assistant) Software Tool Single Amplifier Channel Drive Configuration for Entire Array Advanced 6th Order Crossover Network with HF Protection Color: Black
Electro-Voice ASP-1 36-60" Height Adjustable Steel Subwoofer Stand #F01U117879
The Electro-Voice ASP-1 36-60" Height Adjustable Steel Subwoofer Stand is an accessory pole that attaches to the top of the SB122 bass module. The Electro Voice ASP-1 was designed to hold a subwoofer weighing up to 80 pounds. This high-quality stand has a height range from 30" to 60" and has an attractive durable black powder-coat finish.
Electro-Voice EVIDS4.2B 4 inch Speaker Cabinet/8Ohm (Black/Pair)
The EVID-S4.2 from Electro-Voice is a high-performance, two-way, full-range, 4 inch (102 mm) surface mount speaker with excellent wide, uniform coverage, and outstanding performance. It is designed for background and foreground music, paging, and sound reinforcement, and it's ideal for a wide variety of indoor and outdoor applications, such as restaurants, bars, patios, retail, fitness clubs, hospitality, theme parks, leisure venues, and others.
With unparalleled ease-of-installation, sturdy weather resistance, modern and delicate look, and its flexible mounting options, the EVID-S4.2 is the perfect solution for a wide variety of surface mount applications.
The EVID-S4.2 includes the unique and innovative mount system, from Electro-Voice, making every installation quick, simple, and reliable. The mounting system allows for 90 degrees of rotation horizontally, and 45 degrees of rotation vertically, and it can be easily installed on walls and ceilings. The mounting system comes already assembled and ready to be used, ready to make any job easier.
The EVID-S4.2 has been carefully engineered to resist outdoor environments, without compromising on performance for indoor applications. The full-range speaker is IP54 rated, and its weather-proofing is complemented with exceptional cabinet and grille resistance against sun, salt and moisture.
Features:
Innovative mount system is included for quick, simple, and reliable installations
Carefully engineered for outdoor environments (IP54), without compromising performance
Long throw 4" (102 mm) woofer housed in a fire rated ABS plastic enclosure for extended LF performance down to 75 Hz
40 W power handling provides for 103 dB maximum SPL (109 dB peak)
70 V/100 V transformer version (EVID-4.2T) available for constant voltage systems
Color: Black
1300 Watt Powered 15-inch Subwoofer/40Hz-180Hz
1300 Watt Powered 15-inch Subwoofer/40Hz-180Hz
Features
QuickSmartDSP features best-in-class processing, EV’s signature single-knob user
interface, and intuitive menu navigation via LCD.
Cardioid Control Technology allows output to be steered towards the audience
with up to 35 dB reduction on stage when multiple subs are deployed.
High-efficiency 1300 W Class D power amplifier delivers up to 133 dB peak SPL on
the EKX-15SP utilizing high-sensitivity transducers designed and engineered by EV.
Intelligent thermal management with a variable-speed fan controlled by multiple
onboard sensors, ensuring superior performance and reliability in demanding
environmental conditions.
Two XLR outputs for easy system expansion to additional loudspeakers or
subwoofers. Large slot ports for low distortion and excellent bass extension. Metal
grille reinforcement bar (two on the 18SP). M20 threaded pole mount plate.
12-inch/300-Watt/8 ohms Zakk Wylde Signature Guitar Speaker
12-inch/300-Watt/8 ohms Zakk Wylde Signature Guitar Speaker Features: Official guitar loudspeaker of Zakk Wylde and Black Label Society EVM12L sound with enhanced magnet design and venting 300 W power handling Frequency Response 80Hz - 7kHz (-10 dB) Sensitivity 100dB Large 16 lbs ( 7.3 kg) magnet assembly
Electro-Voice - ZXA1-90B-120V - 800 Watt Powered 8 Two Way Loudspeaker (Black)
Information Name: ZXA1 90B 120V BLK AMP 90X50 Description: Zxa1-90B 120V, Black, Amplified, 90X50 Category: In Wall Speakers UPC Code: 701001106707
electro-voice evolve 50 short column speaker pole, black
Designed for the EVOLVE 50 portable PA system, the Short Column Speaker Pole is 12.6" in length for optimum sound coverage. The pole positions your speaker to effectively cover the audience. The speaker pole features magnetic connectors with integrated wiring for easy setup and breakdown.
Electro-Voice EVID3.2T EVID Series 70V 2-Way Speaker (Black/Pair)
EVID Series 70V 2-Way Speaker (Black, Pair) The EVID 3.2 is a very compact full-range loudspeaker ideal for indoor and outdoor applications requiring high-quality sound. Its shape and size make it nearly invisible for use in background/foreground music systems for restaurants, bars, patios, retail, and other applications The 3.2 & rsquo; s three-dimensional elliptic baffle symmetrically locates the. 75 & rdquo; Ti direct radiator high-frequency element in front of and between the 3.5 & rdquo; low-frequency drivers. The careful shaping, location, and 10° splaying of the LF units provide coverage control by the resulting line array. Lobing is controlled by physically & ldquo; shadowing & rdquo; the LF transducers from each other over the bandwidth where they would normally exhibit interference. EVI D & rsquo; s mounting system provides greater range of aiming angles in both horizontal and vertical planes than other types. The curved grille features designed-in weather resistance and a hidden leash for safety All models are available in black or white, and can easily be painted to match the d & eacute; cor. Transformer versions are also available for constant voltage systems. Features: Ultra-compact full range Ideal for restaurants, bars, patios, and retail Vented LF enclosure 0.75 -inch titanium diaphragm HF driver & nbsp; with neodymium magnetic structure Full-bandwidth overload protection (LF and HF) Elliptical weather-resistant ABS enclosure Paintable black or white finish Magnetically shielded for video applications Strong-Arm Mount & trade; for easy, flexible aiming "T" version for 70 or 100 V distributed systems Color: Black
Electro-Voice EVID3.2TW EVID Series 70V 2-Way Speaker (White/Pair)
EVID Series 70V 2-Way Speaker (White, Pair) The EVID 3.2 is a very compact full-range loudspeaker ideal for indoor and outdoor applications requiring high-quality sound. Its shape and size make it nearly invisible for use in background/foreground music systems for restaurants, bars, patios, retail, and other applications The 3.2 & rsquo; s three-dimensional elliptic baffle symmetrically locates the. 75 & rdquo; Ti direct radiator high-frequency element in front of and between the 3.5 & rdquo; low-frequency drivers. The careful shaping, location, and 10° splaying of the LF units provide coverage control by the resulting line array. Lobing is controlled by physically & ldquo; shadowing & rdquo; the LF transducers from each other over the bandwidth where they would normally exhibit interference. EVI D & rsquo; s mounting system provides greater range of aiming angles in both horizontal and vertical planes than other types. The curved grille features designed-in weather resistance and a hidden leash for safety All models are available in black or white, and can easily be painted to match the d & eacute; cor. Transformer versions are also available for constant voltage systems. Features: Ultra-compact full range Ideal for restaurants, bars, patios, and retail Vented LF enclosure 0.75 -inch titanium diaphragm HF driver & nbsp; with neodymium magnetic structure Full-bandwidth overload protection (LF and HF) Elliptical weather-resistant ABS enclosure Paintable black or white finish Magnetically shielded for video applications Strong-Arm Mount & trade; for easy, flexible aiming "T" version for 70 or 100 V distributed systems Color: White
Telex TSS-1 Alum Tripod Speaker St&, 44-70" Adjustable Height #F.01U.144.916
The Electro-Voice TSS-1 is an aluminum tripod speaker stand with a reversible shaft with 1-3/8" to 1-1/2" ( 34.9 mm to 38mm) diameter tubing. The TSS-1 is height adjustable from 44"-70" ( 1117.6 mm - 1778 mm) and has a maximum weight capacity of 150 lbs (68 kg).
Electro-Voice EVID C4.2 4" 2-Way Coaxial Ceiling Loudspeaker, Pair #F01U117585
Electro-Voice EVID C4.2 4" 2-Way Coaxial Ceiling Loudspeaker, 65Hz-20kHz Frequency Response, 200W Peak/50W Continuous Power, 8 Ohms Impedance, Pair
Electro-Voice PL35 Tom/Snare & Instrument Microphone
Element Type: DynamicFreq Response: 50 Hz - 16,000 HzPolar Pattern: SupercardioidSensitivity: 2.2 mV/PaImpedance: 600 ohmsDesigned for super-fast transient response, and sonically-voiced to deliver open and natural tom and snare sounds, it employs a unique physical design that eliminates the need for right-angle XLR connectors, minimizing cable clutter over the drum. In addition to all of its other outstanding features, it also includes a clever snap-on drum rim clamp that mounts the mic directly to just about any brand drum rim. Putting a completely new angle on miking toms and snares, the PL35 establishes a new price-to-performance standard for dynamic drum set microphones. Designed for super-fast transient response, and sonically-voiced to deliver open and natural tom and snare sounds, it employs a unique physical design that eliminates the need for right-angle XLR connectors, minimizing cable clutter over the drum. In addition to all of its other outstanding features, it also includes a clever snap-on drum rim clamp that mounts the mic directly to just about any brand drum rim. With its unique design, drum rim clamp, integrated swivel and supercardioid polar pattern for isolation, the PL35 will take its place as a must have microphone for outstanding live sound and recording studio performance.
Electro-Voice RE50N/D-B Omni-Directional ENG Microphone W/Rycote Square Mic Flag
The Electro-Voice RE50N/D-B Omni-Directional Handheld Dynamic Microphone is designed specifically for ENG/EFP interview microphone. Every day, for local, national and international news reports, the RE50N/D-B gathers the audio for news interviews. The RE50B's custom "mic-within-a-mic" shock mount provides extremely low handling noise for superior sound. A large, built-in Acoustifoam filter keeps wind and P-pop noise to an absolute minimum, indoors or out.Neodymium, also known as N/DYM or N/D, is a rare-earth element which, when magnetized, is four times more powerful than a normal magnet. Electro-Voice, the developers of N/DYM technology, found that N/D dynamic microphones give equivalent condenser performance without the condenser microphone drawbacks of dead batteries, failing phantom power, or problem operation in high humidity.
Telex TA4-Female to XLR Adapter f/Wireless Lavalier & Headworn Mic #F01U117864
The Electro-Voice TA4-Female to XLR Adapter that enables Electro-Voice wireless lavalier and headworn microphones to be used in hard-wired applications.
Electro-Voice BC-1000 Belt Clip with Tab & Screw for CSB-1000 Transmitter
The BC-1000 is a cell phone style swiveling belt clip with tab and screw for the REV-WT, WTU-2, CSB-1000, WT-1000 or the REV-BP transmitter. The mounting tab also allows these transmitters to work with the PC and Boundary Satellite wireless accessory microphones.
Electro-Voice EVIDS8.2TB 8 inch 70/100V Speaker Cabinet (Black/Pair)
The EVID-S 8.2T from Electro-Voice is a highperformance, two-way, full-range, 8" (203 mm) surface mount speaker with excellent wide, uniform coverage, and outstanding performance. It is designed for background and foreground music, paging, and sound reinforcement, and it's ideal for a wide variety of indoor and outdoor applications, such as restaurants, bars, patios, retail, fitness clubs, hospitality, theme parks, leisure venues, and others. With unparalleled ease-of-installation, sturdy weather resistance, modern and delicate look, and its flexible mounting options, the EVID-S 8.2T is the perfect solution for a wide variety of surface mount applications. The EVID-S 8.2T includes the unique and innovative mounting system, from Electro-Voice, making every installation quick, simple, and reliable. The mounting system allows for 90 degrees of rotation horizontally, and 45 degrees of rotation vertically, and it can be easily installed on walls and ceilings. The mounting system comes already assembled and ready to be used, ready to make any job easier. The EVID-S 8.2T utilizes a 60 W transformer, that offers a selection of 7.5 W (70 V only), 15 W, 30 W, or 60 W delivered to the speaker system using either 70 V or 100 V lines, or 8? bypass for low impedance lines. The EVID-S 8.2T has been carefully engineered to resist outdoor environments, without compromising on performance for indoor applications. Features: Innovative mount system is included for quick, simple, and reliable installations Carefully engineered for outdoor environments (IP54), without compromising performance Long throw 8" (203 mm) woofer housed in a fire rated ABS plastic enclosure for extended LF performance down to 50 Hz 90 W power handling provides for 110 dB maximum SPL (116 dB peak) Color: Black
Dynamic Gooseneck Paging Microphone
A low-impedance gooseneck microphone for single zone paging. Designed for applications where ruggedness, dependability and durability are the main requirements. Microphone housing is constructed of die-cast zinc alloy to stand up to the toughest abuse and conditions. Features a recessed aluminum grille with a windscreen and durable satin-chrome finish.
Features
Heavy duty, three-hole mounting flangeExtra-strength 16" steel-tubing flex armSR785L is the same as SR785LN/O except without normally & ldquo;open & rdquo; switching
N/DYM Dynamic Omnidirectional Interview Long Handle Microphone/Frequency Response 80Hz to 13kHz (Black)
The Electro-Voice RE50N/D-L shock-mounted, dynamic omnidirectional microphone is an offspring of the legendary RE50 microphone. Built with the same rugged design as the RE50, the RE50N/D-L features a DynaDamp shock mount for greater ruggedness and isolation, and a new neodymium N/DYM magnet structure to provide increased sensitivity required in exacting professional applications. Ideally suited for handheld broadcast and sound reinforcement applications, the RE50N/D-L has been built for superior isolation from mechanically induced noise. Handling noise, clothing noise, and even cord shock are isolated from the microphone element. Within the microphone & rsquo;s machined-aluminum outercasing, a DynaDamp shock mount (manufactured using an advanced vibration-isolation material) surrounds the highmass internal acoustic chamber and microphone element, resulting in a degree of isolation unprecedented in an omnidirectional dynamic microphone. The transducer is protected through a unique interlocking concept, making the RE50N/D-L practically indestructible with normal use. The transducer, fitted within a high-mass internal case, is shock-isolated within an attractive external case, therefore protecting the transducer from sudden shock. The microphone & rsquo;s diaphragm permits a very smooth response over a wide frequency range, yet it withstands high humidity and temperature extremes, corrosive effects of salt air and severe mechanical shocks.
Features:
Powerful Electro-Voice neodymium (N/DYM) magnet results in greater output than with standard alnico magnets
DynaDamp shock-isolation system for low handling noise
Rugged design
Finished in semigloss & ldquo;camera & rdquo; black
Comes complete with stand clamp and vinyl pouch
Electro-Voice US602FL Dynamic Noise-Canceling Hand Microphone/200 - 5000 Hz
US602FL? A hand microphone featuring clear speech transmission in high ambient noise level environments, convenient grip-to-talk activation and noise-canceling dynamic design. Perfect for police, marine and mobile paging applications. Architects? and Engineer? s Specifications, US602FL The microphone shall be a noise-cancelling dynamic type, with uniform frequency response from 200 to 5, 000 Hz. The case shall be molded of high impact plastic with black textured finish. A panel mounting bracket shall be supplied. The microphone shall have a net weight of 280.0 g ( 9.9 oz) including cable. The microphone shall have a nominal impedance value of 150 ohms. Output level shall be -60 dB (0 dB = 1 mW/10 dynes/cm2). Cable shall be 4-conductor (2- shielded), rubber-jacketed, black coiled cord extendible to 1.8 m (6 ft). Microphone circuit shall be balanced with respect to ground. An integral press-to-talk switch shall be provided, connected in a manner such that microphone element is shorted in & ldquo; off & rdquo; position while microphone line to amplifier remains & ldquo; open & rdquo; for multiple microphone paging applications. Cable circuits are isolated from microphone circuits.
EV Electro Voice RE20 Variable-D Dynamic Cardioid Studio Microphone RE-20
E. V. Classic Variable-D® dynamic cardioid studio microphone
Electro-Voice RE20 Dynamic Microphone (Silver)
The RE20 dynamic cardioid microphone is truly an industry standard, a firm favorite for broadcasting, podcasting, and sound engineering worldwide. Its popularity also extends into music production as a premium grade instrument microphone. Its Variable-D design and heavy-duty internal pop filter excel for close-in voice work, while an internal element shock-mount reduces vibration-induced noise. Features: Classic sound of FM radio voicesSmooth, natural and controlled sonic characterVariable-D for minimal proximity effectTrue cardioid with no coloration at 180-degrees off-axisVoice tailored frequency responseStudio condenser-like performanceLarge diaphragm dynamic elementHumbucking coil guards against line humMid-bass tone-shaping switchStand clamp includedGet your Electro-Voice RE20 Dynamic Microphone today at the guaranteed lowest price from Sam Ash with our 45-day return and 60-day price protection policy.
Electro-Voice FM4.2 EVID Series Dual 4 inch 2-Way Flush-Mount Speaker (Pair)
The EVID FM4.2 flush-mounted loudspeaker system from Electro-Voice is a complete two-way in-wall loudspeaker package. The package consists of a bezel assembly, grille, rear enclosure, 4 inch two-way loudspeaker coupled with a 4 inch passive radiator and an internal line-matching transformer. The loudspeaker features 4 inch low-frequency cone and high-temperature voice-coil assembly along with a 4 inch long excursion passive radiator and titanium coated dome tweeter. The EVID FM4.2 loudspeaker utilizes a crossover network, centered at 3,600 Hz, that provides 16-dB-per-octave tweeter protection outside of its operating range. In addition the EVID FM4.2 features a comprehensive protection circuit to shield the woofer and tweeter drivers from excessive power levels. The EVID FM4.2 utilizes a transformer that offers a selection of 1.75, 3.75, 7.5, 15 or 30 watts delivered to the loudspeaker system using either 70-V or 100-V lines. The wattage is selected via a convenient switch on the front baffle. The unit can also be operated as an 8-ohm speaker via the same front panel selector switch. The perforated grille is finished in semi-gloss white powder-coated enamel. The baffle and bezel is constructed from heat resistant ABS. The rear enclosure is constructed from zinc-plated, steel. The rear enclosure provides an optimum internal volume, ensuring extended low-frequency performance. It is constructed from heavy-gauge, rugged steel. Features: 4 inch two-way system with polypropylene diaphragm for reliable long-term operation Extremely compact depth fits into tight spaces including walls and tight ceiling spaces Titanium coated tweeter gives even uniform high frequency coverage Front baffle wattage tap adjustment allows for easy level matching after installation Integrated low loss matching transformer allows for either 70v/100v or 8 ohm operation
Electro-Voice 309A Suspension Shock Mount for RE20 / RE27N/D / RE320 Microphones
The Electro-Voice 309A Suspension Microphone Shock Mount is a professional-quality suspension shock mount. The mount is constructed from metal and has a swiveling basket for precise mic positioning. The mount is designed to support the RE20, RE27N/D and RE320 microphones. Because these mics have internal shock mounts as well, the 309A provides an additional level of protection against unwanted vibrations.
Electro-Voice RE20 Broadcast Announcer Microphone (Black) Bundle with Mic Shockmount & Broadcast Arm
A broadcast industry standard, the RE20 Broadcast Announcer Microphone with Variable-D from Electro-Voice is a cardioid dynamic microphone that delivers reliable, low-noise performance with exceptional clarity and definition. This model is styled in a sleek black finish. Response tailored especially for vocals with high sound pressure handling capabilities. Rugged, steel construction with low handling noise. The RE20 features a cardioid polar pattern with no coloration at 180-degrees off-axis—the frequency response is nearly independent of angular location of the sound source, creating virtually no off-axis coloration, yet providing the greatest possible rejection of unwanted sounds.
This bundle includes black matte SSM-BC10 Microphone Suspension Shockmount and a two-section broadcast arm with internal springs and an integrated XLR cable.
Box Contains
Electro-Voice RE20 Broadcast Announcer Microphone with Variable-D (Black)
- 81715 Stand Adapter
- 3-Year Warranty
Microphone Suspension Shockmount
- 1-Year Warranty
Two-Section Broadcast Arm with Internal Springs and Integrated XLR Cable
- Interchangeable Combo Mount
- 4 x Mounting Screws
- Riser
- 1-Year Warranty
Electro-Voice ELX20018SW 18 inch Passive Subwoofer (White)
The ELX series is designed to deliver an unprecedented combination of sound quality, portability and durability at its price point. All-new custom components & mdash; tested to levels far exceeding the industry norm & mdash; make ELX200 a robust workhorse capable of handling real-world abuse and professional applications beyond the capability of competitors & rsquo; products in its category. Every aspect of ELX200 is designed for ideal results as part of the whole - the acoustical, electrical and mechanical components all work together seamlessly. The subwoofers pack powerful low-frequency output into a surprisingly compact footprint, and feature tuned 15 mm thick wood enclosures with a premium top-coat finish. The proprietary features that have made the other members of the EV portable speaker family a go-to for best-in-class performance are also present. Features: 1600 W (peak), 133 dB peak SPL utilizing high sensitivity transducer designed and engineered by EV for maximum punch. High-output EVS-18L woofer designed to exacting specifications for superior durability and exceptional low-frequency reproduction. System reliability verified with over 500 hours of abuse testing and endurance testing. Ideal for portable and installed applications. Lightweight, compact 15 mm wood enclosure with internal bracing with durable polyurea top-coat finish. Professional-grade hardware: integrated M20 threaded pole mount plate and two-handle design for easy lifting. Color: White
Electro-Voice EVIDS8.2TW 8 inch 70/100V Speaker Cabinet (White/Pair)
The EVID-S 8.2T from Electro-Voice is a highperformance, two-way, full-range, 8" (203 mm) surface mount speaker with excellent wide, uniform coverage, and outstanding performance. It is designed for background and foreground music, paging, and sound reinforcement, and it's ideal for a wide variety of indoor and outdoor applications, such as restaurants, bars, patios, retail, fitness clubs, hospitality, theme parks, leisure venues, and others. With unparalleled ease-of-installation, sturdy weather resistance, modern and delicate look, and its flexible mounting options, the EVID-S 8.2T is the perfect solution for a wide variety of surface mount applications. The EVID-S 8.2T includes the unique and innovative mounting system, from Electro-Voice, making every installation quick, simple, and reliable. The mounting system allows for 90 degrees of rotation horizontally, and 45 degrees of rotation vertically, and it can be easily installed on walls and ceilings. The mounting system comes already assembled and ready to be used, ready to make any job easier. The EVID-S 8.2T utilizes a 60 W transformer, that offers a selection of 7.5 W (70 V only), 15 W, 30 W, or 60 W delivered to the speaker system using either 70 V or 100 V lines, or 8? bypass for low impedance lines. The EVID-S 8.2T has been carefully engineered to resist outdoor environments, without compromising on performance for indoor applications. Features: Innovative mount system is included for quick, simple, and reliable installations Carefully engineered for outdoor environments (IP54), without compromising performance Long throw 8" (203 mm) woofer housed in a fire rated ABS plastic enclosure for extended LF performance down to 50 Hz 90 W power handling provides for 110 dB maximum SPL (116 dB peak) Color: White
Telex 376 Windscreen Pop Filter for Ball Type Microphones, Gray #F.01U.117.910
The Electro-Voice 376 gray windscreen has been developed for use with the Electro-Voice 'ball type' microphones. These include (but are not limited to) the DS35, 1776A, 1777A, 671A, PL95, PL77A, PL76A, PL80 and PL91A. In addition the 376 can be used on the RE11, RE16 and PL11 as a pop filter. Full windscreen protection of the last three microphones would require the slotted tube to also be covered. The Electro-Voice 376 windscreen is fabricated of Acoustifoam, a material specifically developed for this use. Unique open-cell Acoustifoam material adds additional protection against dust, magnetic particles, moisture, etc., while also performing its primary function of screening out wind noise and annoying p-pops. br> There is minimal signal attenuation caused by using the model 376 and it is only noticeable above 10 kHz. the directional characteristics of the microphones are unaffected.
Electro-Voice PL33 Kick drum microphone/Dynamic/Supercardioid/20-10000Hz
The PL33 is a supercardioid dynamic microphone designed to deliver the power, punctuation and snap of kick drums in sound reinforcement systems or recording studios of any size. Its frequency response is strategically crafted to deliver great kick drum sound with little, if any, additional EQ-ing. Features Voiced specifically for kick drums and low-frequency instruments Powerful neodymium magnet structure Tight-mesh Memraflex? grille Supercardioid polar pattern Dynamic element
Electro-Voice 78297 Rubber Cord for 309A Suspension Microphone Shockmount
Replacement rubber suspension cords for 309A shock mount and RE20, RE27N/D, RE320 microphones.
Telex Electro-Voice ULM18 Wireless Lavalier Microphone f/R300-E #F.01U.168.803
The ULM18 is a high quality directional (cardioid) condenser lavalier microphone suitable for sound reinforcement or recording of voice. Designed for use with the R300-E wireless bodypack system, the ULM18 allows users the convenience of a hands-free presentation or performance experience. Exceptionally useful for sound reinforcement applications, the ULM18's directional cardioid polar pattern reduces sound system feedback potential when used properly. Contains a 1 meter cable terminating with a TA4F connector, alligator-style clothing clip, and a detachable wire mesh windscreen.
Electro-Voice BP2-Clip-Swivel Belt Clip with Tab & Screw for WT-500 Transmitter
The BP2-Clip-Swivel is a cell phone style swiveling belt clip with tab and screw for the BPU-2 and the WT-500 transmitter. The mounting tab also allows these transmitters to work with the PC and Boundary Satellite wireless accessory microphones.
Electro-Voice EVIDS44W Wall-Mount Background Music Speaker System Package (White)
Wall-mount Background Music Speaker System Package (White) Includes: - 4x EVID-2.1W Surface mount satellite speaker - 1x EVID-40SW Surface mount subwoofer
The EVID Compact Sound Speaker System is a very compact full-range loudspeaker ideal for applications requiring high-quality sound. Its shape flexibility and size make it nearly invisible for use in background/ foreground music systems for restaurants, bars, patios, retail, and other applications. The system consists of a high performance 8-inch subwoofer module with a crossover network to support the included four (4) 2-inch satellite speakers. The system provides for easy signal connections at the subwoofer and can support either 4/8 ohm or 70/100v signal connections. Its high power handling allows the system to be used in a wide variety of environments and spaces to provide high quality background or foreground music.
Features:
A complete matched background/foreground music speaker solution.
Large 8-inch (200 mm) woofer transducer for substantial low frequency output.
Direct connection of satellites to subwoofer - simplifies installation wiring.
Mounting brackets with wide range of motion for surface mount satellites provide easy and secure mounting of speaker to wall.
Convenient detachable phoenix style signal connections speed up installation time.
Color: White
Electro-Voice EVIDS4.2TB 4 inch 70/100V Speaker Cabinet (Black/Pair)
The EVID-S4.2T, from Electro-Voice, is a highperformance, two-way, full-range, 4" (102 mm) surface mount speaker with excellent wide, uniform coverage, and outstanding performance. It is designed for background and foreground music, paging, and sound reinforcement, and it's ideal for a wide variety of indoor and outdoor applications, such as restaurants, bars, patios, retail, fitness clubs, hospitality, theme parks, leisure venues, and others. With unparalleled ease-of-installation, sturdy weather resistance, modern and delicate look, and it's flexible mounting options, the EVID-S4.2T is the perfect solution for a wide variety of surface mount applications.
The EVID-S4.2T includes the unique and innovative mounting system, from Electro-Voice, making every installation quick, simple, and reliable. The mounting system allows for 90 degrees of rotation horizontally, and 45 degrees of rotation vertically, and it can be easily installed on walls and ceilings. The mounting system comes already assembled and ready to be used, ready to make any job easier.
The EVID-S4.2T utilizes a 15 W transformer, that offers a selection of 3.7 W (70 V only), 7.5 W or 15 W delivered to the speaker system using either 70 V or 100 V lines. Selection is done with a Euroblock connector on the input panel located on the rear of the speaker.
The EVID-S4.2T has been carefully engineered to resist outdoor environments, without compromising on performance for indoor applications.
Features:
Innovative mount system is included for quick, simple, and reliable installations
Carefully engineered for outdoor environments (IP54), without compromising performance
Long throw 4" (102 mm) woofer housed in a fire rated ABS plastic enclosure for extended LF performance down to 75 Hz
Color: Black
Electro-Voice RE27N/D Cardioid Variable-D Dynamic N/DYM Instrument Mic W/ACC Kit
The Electro-Voice RE27N/D is a professional-quality dynamic cardioid microphone designed for broadcast production announce and voice-over, high-quality recording and sound reinforcement applications. The RE27N/D utilizes a revolutionary neodymium-alloy magnet and a reinforced diaphragm dome, a combination offering increased sensitivity (up to 6-dB more output), undistorted output at high sound pressure levels and an extended high-frequency response. The exceptional sensitivity of the RE27N/D, excellent transient response and inherently low noise of the dynamic transducer, all combine to ensure a superior signal-to-noise ratio, easily comparable to the finest condenser cardioid microphones. to further reduce noise, a highly effective hum-bucking coil is used to attenuate hum from lighting and other sources. The RE27N/D's continuously Variable-D? design reduces bass- boosting "proximity effect" to maintain a uniform low-frequency response, up-close or at a distance. Two easily operated bass roll-off switches, offering a sharp low-frequency cut at 200 Hz or a gentle roll-off, are available for special situations where bass attenuation is required. A third switch is available for reducing the high-frequency treble boost. The true, uniform cardioid polar pattern of the RE27N/D offers the greatest rejection at 180deg. off axis, insuring superior gain-before- feedback. An integral blast and wind filter covers each acoustic opening on the RE27N/D, allowing "close-talk" situations with no worry of "P-pop, " breath sounds or excessive sibilance. Part of the filter also shock mounts the internal microphone transducer, reducing the transfer of vibration from external sources. This shock-mount system along with the extremely rugged exterior steel casing allows the RE27N/D to withstand all the rigors of professional use.
Electro-Voice RE3-BPOL Wireless Bodypack System, Omni Lavalier Mic, 560-596MHz
UHF wireless set featuring OL3 omnidirectional lavalier microphone Bodypack UHF wireless set featuring OL3 omnidirectional lavalier microphone for voice performance and presentations. The OL3 delivers an open and natural sound even when the user is turning their head side-to-side and its low-profile design eliminates unsightly presence other larger sized lavaliers present. Setup is quick and simple using the RE3 clear frequency scan and sync functions and the radio link between the robust bodypack transmitter and diversity receiver delivers rock-solid system performance. - RE3-ACC-OL3 Omnidirectional lavalier mic with TA4F - The OL3 is a robust, multi-purpose lavalier microphone. It is ideal for presentation, public speaking and on-camera applications where its open and natural sonic characteristics deliver accurate and natural voice reproduction. The low-profile design makes it easy to physically manage and eliminates unsightly presence other larger sized lavaliers present. The omni-directional polar pattern has no proximity effect and is ideal for delivering an open and natural sound, even when the user is turning their head side to-side. The small clothing clip attaches the microphone securely to clothing items or surfaces. The included foam windscreen is effective in reducing wind noise. The 4-pin mini plug is compatible with all current Electro-Voice bodypack transmitters, as well as many other brands who use the 4-pin mini connector convention. Small and unobtrusive low-profile design Omni-directional polar pattern delivers an open and natural sound No proximity effect Wide dynamic range and frequency response Clothing clip holds microphone securely and attaches easily to garments - RE3-RX Diversity Receiver - UHF wireless diversity receiver featuring clear frequency scanning, wireless synchronization to transmitter, balanced XLR and unbalanced 1/4" TRS outputs. The receiver pairs perfectly with any RE3-HHT handheld or RE3-BPT bodypack transmitter within the same band. Setup is quick and simple using the RE3 clear frequency scan and sync functions and the radio link between the robust handheld transmitter and diversity receiver delivers rock-solid system performance. Diversity reception minimizes dropouts Frequency scanning for selecting open frequencies Sync function links transmitter to receiver for easy setup Up to 36 MHz tuning bandwidth (band specific) for trouble-free operation Easy-to-read LCD displayThe RE3-RX is a professional rack-mountable, 1/2 space diversity receiver. Designed to function as the control center for an RE3 wireless set, it features frequency scanning and synchronizing, as well as full transmitter control settings which synchronize to a mated transmitter. The diversity reception technology minimizes the chances of signal dropouts by providing two separate antenna locations which are electronically chosen moment-by-moment based on signal strength and stability.The easy-to-use frequency scanning function simplifies locating and tuning to a clear operating frequency. The sync function wirelessly synchronizes all operating parameters to the mated transmitter. The wide tuning bandwidth provides access to a wide range of frequencies, selectable in 25kHz steps for trouble-free operation of single and multi-channel systems. The easy-to-read LCD display provides vivid viewing of all menus and operating parameters. - RE3-BPT Bodypack Transmitter -
Electro-Voice 320
Custom Mic Stand for Electro Voice RE20 PL20 Microphones RE27 Custom Mic Stand for Electro Voice RE20, RE27, and PL20 Microphones
Electro-Voice EVID3.2 EVID Series 150 Watt 2-Way Speaker (Black/Pair)
The EVID 3.2 is a very compact full-range loudspeaker ideal for indoor and outdoor applications requiring high-quality sound. Its shape and size make it nearly invisible for use in background/foreground music systems for restaurants, bars, patios, retail, and other applications The 3.2 & rsquo;s three-dimensional elliptic baffle symmetrically locates the .75 & rdquo; Ti direct radiator high-frequency element in front of and between the 3.5 & rdquo; low-frequency drivers. The careful shaping, location, and 10 & deg; splaying of the LF units provide coverage control by the resulting line array. Lobing is controlled by physically & ldquo;shadowing & rdquo; the LF transducers from each other over the bandwidth where they would normally exhibit interference. EVID & rsquo;s mounting system provides greater range of aiming angles in both horizontal and vertical planes than other types. The curved grille features designed-in weather resistance and a hidden leash for safety All models are available in black or white, and can easily be painted to match the d & eacute;cor. Transformer versions are also available for constant voltage systems. Features: Line-array enhanced coverage control Organic, unobtrusive shape Strong-Arm-MountTM for easy, flexible aiming Full-bandwidth overload protection Weather resistant - Conforms to Mil Spec 810 and IEC 529 IP 34 Dual LF transducers for extended bass and greater power handling and output Ti direct-radiator HF transducer, Neodymium structure High sensitivity Magnetically shielded Zinc-plated grilles Transformer Versions Color: Black
Electro-Voice EVID40C Ceiling-Mount Satellite 200W/Mono 4 Ohm Operation Subwoofer (White)
The EVID compact sound speaker system is a very compact full-range loudspeaker ideal for applications requiring high-quality sound. Its shape flexibility and size make it nearly invisible for use in background/foreground music systems for restaurants, bars, patios, retail, and other applications. Its high power handling allows the system to be used in a wide variety of environments and spaces to provide high quality background or foreground music. Read through this manual to familiarize yourself with the safety information, features, and applications before you use these products.
Features:
Components can be combined in any mix of 4 satellite speakers to a single subwoofer to meet d & eacute;cor or installation requirements
Quick-install design with captive mounting tabs to fit nearly any ceiling construction
Four-pin Phoenix connectors on ceiling satellite speakers support pass-thru wiring
Simplified mounting design for satellites - concept provides secure mounting while allowing for significant articulation and range of motion
Attractive subwoofer design with full-face grille - install it anywhere, no need to hide
Electro-Voice EVID 3.2 2-Way 150-Watt Installation Speaker, Black, Pair
The Electro-Voice EVID 3.2 is a surface mount installation speaker (Black) featuring dual 3.5 woofers and a .75" tweeter handling 150 Watts and housed in a compact and flexibly mounted enclosure. The EVID 3.2 features a durable and rugged ABS enclosure with a zinc-coated steel grill to protect all internal components, which include dual weather-resistant treated woofers and a symmetrically located high-frequency tweeter. The speaker design offers balanced, full-range sound with optimum coverage.Mounting the EVID 3.2 is achieved via the SAM Strong-Arm-Mount), which attaches each unit to a variety of locations and allows for a high degree of horizontal and vertical directivity. Additionally, the SAM mounting mechanism in combination with the speakers' unique shape and size, allows for a sort of invisibility that works well in bar, restaurant or retail environments as a background music and paging solution.
Electro-Voice S40W 5.25 inch 2-Way 160W RMS Speaker (White/Pair)
Delivering high performance in an ultra-compact package, the S series is ideal for both distributed and near-field applications requiring high-quality sound. The two-way short-throw system is housed in an optimally vented, high-impact polystyrene enclosure that is suited for installation both indoors and out. Lows are handled by a 5.25- inch direct-radiating woofer with a polypropylene cone, while the high-frequency section is a one-inch direct-radiating soft-dome tweeter that is ferrofluid cooled. Built-in automatic power limiting independently protects each driver from unsafe transients. With mounting options that are flexible enough for virtually any application, the S series is perfect for anything from background and foreground music in restaurants and clubs to near-field monitoring in control rooms and broadcast studios. Features: Ideal for both distributed and near-field applications Designed for indoor and outdoor use Direct-radiating polypropylene-cone woofer 1-inch ferrofluid-cooled soft-dome tweeter High power-handling, ultra-linear frequency response Vented trapezoidal enclosure of high-impact polystyrene Passive crossover with power protection for both woofer and tweeter OmniMount(R)-compatible 0.25 inch suspension points (2) Color: White
Electro-Voice EVID4.2W EVID Series 200 Watt 2-Way Speaker (White/Pair)
The EVID 4.2 is a very compact full range loudspeaker ideal for indoor and outdoor applications requiring high-quality sound. It & rsquo;s shape and size make it nearly invisible for use in background/foreground music systems for restaurants, bars, patios, retail, and other applications The 4.2 & rsquo;s three-dimensional elliptic baffle symmetrically locates the 1 & rdquo; Ti high frequency element with a Coherent Coverage Waveguide in front of, and between the 4 & rdquo; low frequency drivers. This careful shaping, location, and 10 & deg; splaying of the lf units provides coverage control by the resulting line array. Lobing is controlled by physically & ldquo;shadowing & rdquo; the lf transducers from each other over the bandwidth they would normally exhibit interference. EVID & rsquo;s mounting system provides greater range of aiming angles in both horizontal and vertical planes than other types. The curved grille features designed-in weather resistance and a hidden leash for safety. All models are available in black or white, and can easily be painted to match the d & eacute;cor. Transformer versions are also available for constant voltage systems. Features: Line-array enhanced coverage control Organic, unobtrusive shape Strong-Arm-MountTM for easy, flexible aiming Full-bandwidth overload protection Weather resistant - Conforms to Mil Spec 810 and IEC 529 IP 34 Dual LF transducers for extended bass and greater power handling and output Ti direct-radiator HF transducer, Neodymium structure High sensitivity Magnetically shielded Zinc-plated grilles Transformer Versions Color: White
Electro-Voice MFX15MCB 15 inch 2-Way Coaxial 60x40 Multi-Functional Speaker (Black)
MFX Multi-Functional Monitors deliver a new level of reference performance from compact, two-way, coaxial designs. In addition to their primary use as live sound stage monitors, they can also serve as shortthrow, full range sound reinforcement speakers (with or without subwoofer) and are appropriate for a wide range of permanent installations. The internal details of the cabinet were selected in order to maximize internal volume while maintaining a low stage profile to preserve sight lines. The input panel is recessed into the rear of the speaker, protecting connectors within the cabinet envelope. The panel includes NL4 input and loop-through connections, along with a passive/biamp switch. MFX Multi-Function Monitors are an attractive investment for live sound companies because they can be deployed in multiple system roles, keeping more of the rental inventory working rather than sitting in the warehouse until an appropriate job is booked. EV has created a library of DSP settings to optimize the speakers for specific uses. The recommended MFX monitor amplifier match is the Dynacord TGX or IPX amplifier series. The loudspeaker settings run in Dynacord & rsquo; s SONICUE control software, which loads them into the amplifier DSP section. Features: Multi-functional, coaxial, short-throw point source for stage monitoring, FOH, front fill, and side fill Rugged tour-grade durability in a lightweight, ergonomic design Low profile maximizes audience sight lines Switched passive or biamp operation with factory presets for any application Range of mounting accessories for live sound and fixed installation Color: Black
Electro-Voice PCBOUNDARYSAT Dual Condensor Multi-Pattern Wireless Boundary Microphone
The PC Boundary Satellite is a low profile multi-pattern microphone. This low-profile foundation hides PC Boundary Satellite & rsquo;s most powerful feature-space for a wireless transmitter, and is highly shielded from RFI/GSM thanks to EV & rsquo;s exclusive RF shield technology. Turn the microphone over to reveal the specially designed compartment for housing an Electro-Voice or Telex bodypack transmitter. Connect the microphone to the bodypack, set-up the wireless channel, and place the PC Boundary Satellite anywhere an easy-to-use microphone is required. No longer do you have to cut holes in tables, run long cables, or compromise the architectural integrity of an installation. With the PC Boundary Satellite, anything is possible. The PC Boundary Satellite features an EV PolarChoice multi-pattern microphone. The multi-pattern versatility of the PolarChoice microphone makes it a true & ldquo;problem solver & rdquo;. With one non-directional and three directional polar patterns available, the PolarChoice microphone is ideal for virtually any installation. Of particular interest is the figure 8 pattern that allows miking people on opposite sides of a table with only one mic, while providing dramatic reduction of ambient room noise. Features: Selectable polar patterns; omni, cardioid, supercardioid or figure 8. RF shield provides superior RFI/GSM shielding. Consistent microphone voicing across all four (4) patterns. Easy to use mute switch. Can be programmed to operate as either latching on/off or momentary push-to-mute/push-to-talk. High visibility blue LED clearly displays mic status to the user. Accepts Electro-Voice & amp; Telex bodypack transmitters. (See page 3 for details.) Wireless system sold separately.
Electro-Voice EVID-3.2 2-Way 150-Watt Installation Speaker, Pair, White
The Electro-Voice EVID-3.2 2-Way 150-Watt Installation Speaker (Pair, White) is a surface mount installation speaker that features dual 3.5 woofers and a .75" tweeter handling 150 Watts and housed in a compact and flexibly mounted enclosure. The EVID 3.2 features a durable and rugged ABS enclosure with a zinc-coated steel grill to protect all internal components, which include dual weather-resistant treated woofers and a symmetrically located high-frequency tweeter. The speaker design offers balanced, full-range sound with optimum coverage.Mounting the EVID 3.2 is achieved via the SAM (Strong-Arm-Mount), which attaches each unit to a variety of locations and allows for a high degree of horizontal and vertical directivity. Additionally, the SAM mounting mechanism in combination with the speakers' unique shape and size, allows for a sort of invisibility that works well in bar, restaurant or retail environments as a background music and paging solution.
EVID Series 70V 2-Way Speaker (Black/Pair)
EVID Series 70V 2-Way Speaker (Black, Pair)
The EVID 4.2 is a very compact full range loudspeaker ideal for indoor and outdoor applications requiring high-quality sound. It & rsquo;s shape and size make it nearly invisible for use in background/foreground music systems for restaurants, bars, patios, retail, and other applications
The 4.2 & rsquo;s three-dimensional elliptic baffle symmetrically locates the 1 & rdquo; Ti high frequency element with a Coherent Coverage Waveguide in front of, and between the 4 & rdquo; low frequency drivers. This careful shaping, location, and 10 & deg; splaying of the lf units provides coverage control by the resulting line array. Lobing is controlled by physically & ldquo;shadowing & rdquo; the lf transducers from each other over the bandwidth they would normally exhibit interference. EVID & rsquo;s mounting system provides greater range of aiming angles in both horizontal and vertical planes than other types. The curved grille features designed-in weather resistance and a hidden leash for safety
All models are available in black or white, and can easily be painted to match the d & eacute;cor. Transformer versions are also available for constant voltage systems.
Features:
Compact full range
Ideal for restaurants, bars, patios, and retail
Vented LF enclosure
1-inch titanium diaphragm HF driver with & nbsp;neodymium magnetic structure
Coherent Coverage Waveguide
Full-bandwidth overload protection (LF and HF)
Elliptical weather-resistant ABS enclosure
Magnetically shielded for video applications
Strong-Arm Mount & trade; for easy, flexible aiming
"T" version for 70 or 100 V distributed systems
Color: Black
Electro-Voice ELX20012PUS 12 inch 2-Way powered speaker/51 Hz - 20 kHz/US cord
ELX200-12P features high-efficiency Class-D power amplifiers (up to 1200 W) with integrated QuickSmartDSP, and delivers up to 130 dB SPL utilizing transducers designed and engineered by EV (12-inch EVS-12M woofer coupled with a DH-1C 1-inch titanium compression driver). Powered full-range models allow easy setup via four presets (Music, Live, Speech, Club), sub/top system-match crossovers,three-band EQ, five user-programmable presets (Store and Recall settings), visual monitoring of limiter status, input level control and meters, and master volume control to ensure optimal gain structure.
The new QuickSmart Mobile wireless control and monitoring application, using Bluetooth® Low Energy (BTLE) technology, allows intuitive system control, configuration and monitoring of up to six powered ELX200 loudspeakers simultaneously.
Features
EV QuickSmart Mobile application: quickly and wirelessly configure, control and monitor up to six ELX200 loudspeakers simultaneously, and receive immediate notification during critical performance conditions.
QuickSmartDSP features best-in-class processing.
High-efficiency 1200 W Class-D power amplifier delivers up to 130 dB peak SPL utilizing transducers designed and engineered by EV.
EV-patented Signal Synchronized Transducers (SST) waveguide design provides precise and consistent coverage, minimal distortion, and maximized acoustical loading.
electrovoice evolve 50 1000watt powered column array system, black
The Electro-Voice EVOLVE 50 Portable Column System bundles the EVOLVE50-SB-US and the EVOLVE50-TB, which together consist of the EVOLVE50 column subwoofer in black, column array, sub pole, and carrying bag. The EVOLVE 50 Portable Column System is a three component loudspeaker system powered by a 1000 W Class-D amplifier and driven by Electro-Voice's Quick Smart DSP. The system consists of a 15 mm wooden, ported, powered subwoofer enclosure that houses a 12 subwoofer capable of a functional frequency output down to 37 Hz. The bi-directional aluminum poles connection to the subwoofer is secured using a magnet, and the column array is gravity-held to the sub pole. The signal is internally routed to the components. Eight 3.5" neodymium drivers in the column array coupled with the 12" subwoofer delivers up to 127 dB SPL. The eight composite waveguides control high frequencies with 120 Degree of horizontal coverage, and 40 Degree of asymmetrical (down-facing) vertical coverage to ensure suitable output for sitting and standing audiences. The sub pole and column array come prepackaged in a carrying bag. The processing engine allows for easy setup via four presets (Music, Live, Speech, and Club), three-band EQ, five user-programmable presets (Store and Recall settings), output delay, phantom power (+15V), visual monitoring of limiter status, input level control and meters, and master volume control to ensure optimal gain structure. The new Electro-Voice Quick Smart Mobile application utilizes Bluetooth Low Energy (BTLE) technology for the wireless configuration, control, and monitoring of up to six EVOLVE 50 systems simultaneously. High resolution Bluetooth audio streaming adds convenience for wireless music playback in breakout rooms, intermission, and musical accompaniment. Bluetooth is available in select countries. UPC NO: 800549871105 SKU: ADIB0768C62G8
Electro-Voice ZLX-15 / ZLX-15P Padded Cover
Logo cover for the EV ZLX-15. Padded with access to handle. Cut to fit perfectly.
EV ELX115P 15" 2 Way Powered Speaker - Live X Powered Full Range Speaker
Extends Up To 41Fits All Digital & Video Cameras With Tripod SocketPortable Travel Size2-way Pan HeadRubber Feet
Electro-Voice ELX20015PUS 15 inch 2-Way powered speaker/48 Hz - 19 kHz/US cord
ELX200-15P features high-efficiency Class-D power amplifiers (up to 1200 W) with integrated QuickSmartDSP, and delivers up to 132 dB SPL utilizing transducers designed and engineered by EV (15-inch EVS-15M woofer coupled with a DH-1C 1-inch titanium compression driver). Powered full-range models allow easy setup via four presets (Music, Live, Speech, Club), sub/top system-match crossovers, three-band EQ, five user-programmable presets (Store and Recall settings), visual monitoring of limiter status, input level control and meters, and master volume control to ensure optimal gain structure.ELX200 powered models are ideal for portable and installed applications, with lightweight and durable polypropylene enclosures, three M10 threaded mounting points and the proven ZLX handle design for easy lifting.
Features:
EV QuickSmart Mobile application: quickly and wirelessly configure, control and monitor up to six ELX200 loudspeakers simultaneously, and receive immediate notification during critical performance conditions.
QuickSmartDSP features best-in-class processing.
High-efficiency 1200 W Class-D power amplifier delivers up to 130 dB peak SPL utilizing transducers designed and engineered by EV.
EV-patented Signal Synchronized Transducers (SST) waveguide design provides precise and consistent coverage, minimal distortion, and maximized acoustical loading.
Professional-grade hardware: three M10 threaded mounting points for forged eyebolts, integrated pole-mounts and the proven ZLX two-handle design for easy lifting.
Electro-Voice EVID2.1W Surface-Mount Satellite Speakers (White)
Surface-mount Satellite Speakers (White, priced and sold in pairs)
The EVID compact sound speaker system is a very compact full-range loudspeaker ideal for applications requiring high-quality sound. Its shape flexibility and size make it nearly invisible for use in background/ foreground music systems for restaurants, bars, patios, retail, and other applications. Its high power handling allows the system to be used in a wide variety of environments and spaces to provide high quality background or foreground music.
Features:
16 Ohm operation
Power handling: 30 W
Frequency Range: 180Hz - 20kHz
Sensitivity: 84 db, 1W/1m"
Color: White
Electro-Voice EVM12L Classic 12" 200 Watt Guitar Loudspeaker
The EVM12L CLASSIC is known for its classic sound, road-ready reliability, and for being a favorite guitar loudspeaker among guitarists of all styles. UPC: 033172717292 SKU: ADIB000Z33HYI
Electro-Voice RE3-ND76 Wireless Handheld System, 560-596MHz #F.01U.354.200
UHF wireless set featuring ND76 dynamic cardioid microphone Handheld UHF wireless set featuring ND76 dynamic cardioid microphone head for vocal performance and presentations. The ND 76's crisp, clear and balanced vocal presence is ideal for all-around voice applications. Setup is quick and simple using the RE3 clear frequency scan and sync functions and the radio link between the robust handheld transmitter and diversity receiver delivers rock-solid system performance. - ND76-RC3 Wireless head with ND76 capsule - The Electro-Voice ND76-RC3 is a robust, high performance, dynamic cardioid thread-on vocal microphone head for wireless handheld transmitters. This microphone head electrically and mechanically adapts to Electro-Voice (and many other brands) wireless handheld transmitters that use the common 3-contact rings, 1.25" diameter by 28-thread pitch coupling convention. The floating captured ID collar will spin freely until screwing the head on tightly. It will remain locked in place when fully tightened. This allows the desired orientation of the branding to the transmitter. Thread-on microphone head for Electro-Voice and other brand's wireless handheld transmitters Excellent all-around vocal performance: crisp, clear and balanced Large diaphragm dynamic capsule creates a rich and detailed frequency response Shock-mounted capsule minimizes handling noise Memraflex grille resists dentingDesigned for excellent all-around voice applications, the precisely tuned capsule delivers crisp, clear and balanced vocal presence, as well as superior isolation from sound on the stage. The microphone head's dynamic capsule contains a large Mylar diaphragm, which delivers a rich and detailed frequency response by combining its large surface area for tonal balance with its low-mass high velocity material for exceptionally fast transient response.The microphone head features an innovative capsule shock-mount system consisting of a 4-point suspension around the circumference of the capsule combined with a tuned pneumatic pump at the capsule base, offering superior handling noise reduction to eliminate mechanical vibrations and noise in the mix.The Memraflex grille is made of a durable tight-mesh grille wire that withstands extraordinarily rough treatment. Your microphone head remains protected and looking good gig-after-gig, year-after-year. For additional protection, the capsule contains a hydrophobic cloth membrane, which prevents moisture and debris from reaching the diaphragm. The capsule uses a humbucking coil that attenuates AC hum and electromagnetic interference. Use the ND dynamic mics with confidence near speaker cabinets and EMF generating equipment racks. - RE3-HHT Handheld Transmitter - The RE3-HHT is a lightweight, yet robust UHF handheld transmitter body. It is ideally-suited for professional performance and presentation applications. Due to its commonly-used 1.25" diameter, 28 UN-2A thread pitch microphone head coupling, it accepts mic heads using this common coupling convention. Although primarily intended to accept the ND and RE Series heads developed for RE3 listed in the accessories section of this data sheet, the RE3-HHT will adapt other microphone heads using the 1.25" diameter, 28 UN-2A thread pitch coupling scheme. Robust metal body Sync function for easy frequency setup Selectable low and high output power (band specific) Up to 36 MHz tuning bandwidth (band specific) Common threaded coupling allows microphone head interchangeable
Dual Condensor Multi-Pattern Wireless Gooseneck Microphone (12 inch)
The PolarChoice & trade; Satellite is a free-standing gooseneck style microphone, firmly anchored in place by its & rsquo; elegantly designed base. This low-profile foundation hides PolarChoice & trade; Satellite & rsquo;s most powerful feature - space for a wireless transmitter. Turn the base over to reveal the specially designed compartment for housing a Telex or Electro-Voice bodypack transmitter. Connect the microphone to the bodypack, set-up the wireless channel, and place PC Satellite anywhere an easy-to-use microphone is required. No longer do you have to cut holes in tables, run long cables, or compromise the architectural integrity of an installation. With the Polar Choice & trade; Satellite, anything is possible. The PC-Satellite features an EV PolarChoice & trade; multi-pattern microphone. .
Features:
Free-standing weighted base for reliable stability.
Accepts Telex & amp; Electro-Voice bodypack transmitters (RE-1, RE-2, FMR-1000, FMR 500 & amp; Safe-1000)
Easy to use mute switch. Can be programmed to operate as either latching on/off or momentary push-to-mute.
High visibility blue LED clearly displays mic status to the user.
Exceptional sound quality with EV & rsquo;s proven PolarChoice design.
Selectable polar pattern to easily adapt to any situation. Choose between omni, cardioid, supercardioid or hypercardioid.
Consistent microphone voicing across all four patterns.
Length: 12".
Wireless system sold separately
Electro-Voice PCBOUNDARY Dual Condensor Multi-Pattern Boundary Layer Microphone/50-20000Hz
The PC Boundary is a very low-profile area microphone that can be used on any surface and with virtually any mic mixer. Featuring multiple on-board polar patterns?three directional and one omni?the PC Boundary is ideal for any installation where premium-grade area coverage is required. Features Easy switching between omni, cardioid, supercardioid, or figure & ldquo;8 & rdquo; polar patterns Versatility for different acoustic environments Consistent microphone voicing across all four patterns Easy-to-use mute switch, programmable for either latching on/off or momentary operation
Telex Electro-Voice 379-1 Windscreen Pop Filter, Black #F.01U.117.911
The Electro-Voice 379-1 Black Windscreen Pop Filter is specially designed for PS35, E11, RE16, RE50, 1777A, 1776B, 661, 671B, and 658 Microphones.
Electro-Voice Instrument cable 1/4 to TA4F TA4F
The GC3 is a special-purpose cable for connecting instruments or line-level signal sources with 1/4” output jacks to the RE3-BPT bodypack transmitter. The cable is robust, with an easy-to-grip 1/4” plug on one end and an industry-standard 4-pin mini plug on the other. Connects stringed instruments with either passive or active pickups to the transmitter for wireless use.
Electro-Voice RE3 Handheld Wireless System (Band 6M, 653-663MHz)
Handheld UHF wireless set featuring ND76 dynamic cardioid microphone head for vocal performance and presentations. The ND 76 & #39; s crisp, clear, and balanced vocal presence is ideal for all-around voice applications. Setup is quick and simple using the RE3 clear frequency scan and sync functions, and the radio link between the robust handheld transmitter and diversity receiver delivers rock-solid system performance. Features: ND76 Microphone Capsule: Thread-on microphone head for Electro-Voice and other brand & #39; s wireless handheld transmittersExcellent all-around vocal performance: crisp, clear and balancedLarge diaphragm dynamic capsule creates a rich and detailed frequency responseShock-mounted capsule minimizes handling noiseMemraflex grille resists dentingRE3-HHT RE3 Handheld Transmitter: Robust metal bodyUp to 36 MHz tuning bandwidth (band specific) Selectable low and high output power (band specific) Common threaded coupling allows microphone head interchangeableSync function for easy frequency setupRE3-RX RE3 Diversity Reciever Diversity reception minimizes dropoutsUp to 36 MHz tuning bandwidth (band specific) for trouble-free operationEasy-to-read LCD displayFrequency scanning for selecting open frequenciesSync function links transmitter to receiver for easysetupIncludes receiver, transmitter, microphone capsule, two receiver antennas, universal power supply, two AA batteries, owner & #39; s manual, documentation packet, declaration packet, and declaration of conformity Get your Electro-Voice RE3 Handheld Wireless System (Band 6M 653-663MHz) today at the guaranteed lowest price from Sam Ash with our 45-day return and 60-day price protection policy.
