ALMSC119 FIRE-LITE ALARMS-HONEYWELL-US PROGRAMMING CABLE FOR IPDACT
Programming Cable For Ipdact-Main Features- Cable Type: Serial-Connector on First End: 1 x RJ-45 Male Network-Connector on Second End: 1 x 9-pin DB-9 Female Serial-- - - - Marketing Information- Programming Cable For Ipdact- - - Information- Name: PROGRAMMING CABLE FOR IPDACT Category: Other Fire Accessories ?Accessory DevicesUPC Code: 783008112400 Also known as -Fire-Lite Alarms-Honeywell-Us PROGRAMMING CABLE FOR IPDACT - FL-ALMSC119
ECC-RM FIRE-LITE ALARMS-HONEYWELL-US REMOTE MICROPHONE
The ECC-RM is an optional Remote Microphone that is compatible with the ECC-50/ 100 (E) Emergency Command Center for fire protection applications. It is part of the family of external remote consoles that allows for extending the operator interface to remote locations within a building.
MRP2001 FIRE-LITE ALARMS-HONEYWELL-US DELUGE/PREACTION CONTROL PANEL
MRP2001 FL-MRP2001 FIRE-LITE ALARMS-HONEYWELL-US DELUGE/PREACTION CONTROL PANEL
IPDACT-2UD FIRE-LITE ALARMS-HONEYWELL-US INCLUDES IPDACT2 AND 2UD
The new FireWatch IPDACT-2 and IPDACT-2UD are communicators based on the original IPDACT optional digital alarm communications module from Fire. Lite. The new IPDACT-2 duplicates the previous function found in the original IPDACT but adds two supervised inputs, two additional outputs, an improved terminal strip and the addition of several legacy panels to the compatibility list. The IPDACT-2UD version 6.0 adds a modem daughter board (2UD) that supports upload/ download over the Internet or a customers Intranet.
MRP2002 FIRE-LITE ALARMS-HONEYWELL-US AGENT RELEASE CONTROL PANEL
The MRP-2002 is a six-zone releasing fire control panel for single and dual hazard agent releasing applications. The MRP-2002 provides reliable fire detection, signaling and protection for commercial, industrial and institutional buildings requiring agent-based releasing. The panel operates at 120VAC. Also known as -Fire-Lite Alarms-Honeywell-Us AGENT RELEASE CONTROL PANEL - FL-MRP2002
W-GATE FIRE-LITE ALARMS-HONEYWELL-US LITESPEED WIRELESS GATEWAY
FireLite Alarms' SWIFT (Smart Wireless Integrated Fire Technology) Wireless System can be applied in many situations that are problematic for traditional wired devices. In cases where areas of a building are difficult or impossible to wire, visually sensitive, or have restricted access, SWIFT wireless sensors provide an efficient, reliable solution. SWIFT wireless devices communicate via a proprietary wireless mesh protocol to communicate with FireLite fire alarm systems by means of a SWIFT wireless gateway. The SWIFT gateway connects to the SLC loop of an ES-200X, ES-50X, MS-9200UDLS or MS9600 (UD) LS panel using LiteSpeed protocol. New type IDs for wireless devices are supported (for the ES-200X and ES-50X only) that allow the FACP to display all events such as alarms and trouble indications, as well as unique trouble conditions required for wireless devices. This capability eliminates the need for a supplementary annunciator for wireless event messages. Wireless devices in a SWIFT network develop "parent-child" communication links with other devices in the mesh, so that a message originating from a remote device "hops" to the closest parent device, and then to successive parent devices until the message reaches gateway. Alternate paths are also identified and supervised by the SWIFT protocol providing approved Class A wireless communication. If a device does not have an established communication path with adequate signal strength, an additional device such as a wireless module may be installed in between so that it will act as a repeater. A SWIFT gateway system supports up to 50 devices: 1 SWIFT gateway and up to 49 wireless detectors, modules, pullstations, and A/V bases when used with the ES-200X or ES-50X. The MS-9200UDLS and MS-9600 (UD) LS can supports a SWIFT gateway and up to 48 detectors, modules, pullstations, A/V bases, and 1 display driver. The maximum number of gateways on a system is limited by the number of available SLC addresses on the FACP, or a maximum of 4 gateways within common wireless range. One W-DIS-D Wireless Display Driver and ANN-80-W Annunciator are required with each W-GATE installed in a system using the MS-9200UDLS or MS9600 (UD) LS control panels. The W-DIS-D and ANN-80-W display wireless-specific events that cannot be displayed on the FACP. The SWIFT system has been designed so that it can be installed using only typical hand tools and magnets. However, the SWIFT Tools PC utility provides many benefits that can enhance the process of performing a site evaluation (Site Survey), installing a system (Mesh Configuration), or extracting detailed information from the system (Diagnostics). The utility runs on a Windows laptop, and uses a USB radio antenna (W-USB) inserted into a USB slot to communicate with wireless devices within range of the PC. Once devices have formed a mesh, SWIFT Tools can provide current information on all devices in the mesh as long as the PC is within range of the SWIFT Gateway. The result is a fire system that combines both wired and wireless detection and presents all event information at the panel and/or network displays, when used, and a display driver/annunciator, when required. Features: Wireless mesh technology (902-928 MHz frequency) Cascading-wave mesh operation provides a verification of redundant communication paths Any wireless device can be added to act as a repeater Each gateway supports up to 50 addresses: 1 wireless gateway, 1 display driver, if required, and up to 49 devices Up to 4 wireless networks can be installed with overlapping radio network coverage
CAC4 FIRE-LITE ALARMS-HONEYWELL-US CLASS A MODULE F/MS4
CAC4 FL-CAC4 FIRE-LITE ALARMS-HONEYWELL-US CLASS A MODULE F/MS4
BG-12LX FIRE-LITE ALARMS-HONEYWELL-US PULL STATION ADDRESSABLE
The Fire?? Lite BG 12LX is a state of the art, dual action i. e., requires two motions to activate the station pull station that includes an addressable interface mounted inside for Fire?? Lite s addressable fire alarm control panels FACPs Because the BG 12LX is addressable, the control panel can display the exact location of the activated manual station. This leads fire personnel quickly to the location of the alarm.
DNR FIRE-LITE ALARMS-HONEYWELL-US DET,DUCT,INTELL,NON-RELAY
DET, DUCT, INTELL, NON-RELAY
CRF-300 FIRE-LITE ALARMS-HONEYWELL-US ADDRESSABLE CNTRL RELAY MODULE
The CRF 300 Addressable Relay Module provides theMS 9200 and MS 9600 systems with two isolated sets of Form C dry contact outputs for activating a variety of auxiliary devices, such as fans, dampers, door holders, control equipment, etc. Addressability allows the dry contact to be activated, either manually or through panel programming, on a select basis
PRT/PK-CABLE FIRE-LITE ALARMS-HONEYWELL-US PRTPKCABLE PRINTER CABLE
PRT/PK-CABLE FL-PRTPKCABL FIRE-LITE ALARMS-HONEYWELL-US PRTPKCABLE PRINTER CABLE
411UD FIRE-LITE ALARMS-HONEYWELL-US 4 INPUT CHANNELS, FORM-C
The Fire-Watch 411 Series from Fire. Lite are compact, multifaceted, slave Digital Alarm Communicator Transmitters (DACTs) designed for a variety of fire, and non-fire applications. The series consists of two models: the 411 and 411UD, providing three and four monitoring channels (inputs) respectively. These slave DACTs are a cost-effective solution for applications that require an existing (or new) Fire Alarm Control Panel to transmit system status to an off-site monitoring facility for Central or Remote Station compliance.
FIRE-LITE ALARMS HONEYWELL MS9600UDLS REV 2 MS9600UDLS W/DACT-2UD
Built upon the features found in the highly successful MS-9200UD, the new LS model features Fire-Lites new fast Litespeed polling protocol. Not only does it poll 10 devices at a time, it permits the use of standard unshielded fire wire. The MS-9200UDLS is ideal for commercial, industrial, manufacturing, office buildings, schools, strip malls and other facilities requiring performance-based, sophisticated technology at reasonable cost. Also known as -Fire-Lite Alarms-Honeywell-Us REV 2 MS9600UDLS W/ DACT-2UD - FL-MS9600UDL
FCPS-24S8RB FIRE-LITE ALARMS-HONEYWELL-US FCPS24S8RB REP BRD F/FCPS24FS8
FCPS-24S8RB FL-FCPS248RB FIRE-LITE ALARMS-HONEYWELL-US FCPS24S8RB REP BRD F/FCPS24FS8
XRM-24 FIRE-LITE ALARMS-HONEYWELL-US EXPNDR TRANSFORMER 3.6 AMPS
XRM-24 FL-XRM24 FIRE-LITE ALARMS-HONEYWELL-US EXPNDR TRANSFORMER 3.6 AMPS
LCD-80F FIRE-LITE ALARMS-HONEYWELL-US 80 CHAR ANNUN F/9200UD/9600
The LCD-80F is a compact, cost-effective, 80-character, back- lit LCD remote Fire Annunciator for use with the Fire-Lite MS- 9200UD Series and MS-9600 Series Fire Alarm Control Pan- els (FACPs). The LCD-80F displays complete system point status information and includes control switches for remote control of critical system functions. Up to 32 LCD-80Fs may be connected onto the EIA-485 termi- nal port of each FACP. The LCD-80F requires no program- ming, which saves time during system commissioning. Also known as -Fire-Lite Alarms-Honeywell-Us 80 CHAR ANNUN F/ 9200UD/ 9600 - FL-LCD80F
Fire-Lite Alarms ECC-50/100 PRIMARY OPERATOR CONSOLE EMERGENCY COMMAND CENTER 50WT
Emergency Command Center 50Wt -Category: Voice Evacuation, Fire
FC-TR FIRE-LITE ALARMS-HONEYWELL-US TRIM RING SEMI FLH MT F/PANELS
FC-TR FL-FCTR FIRE-LITE ALARMS-HONEYWELL-US TRIM RING SEMI FLH MT F/PANELS
FIRE-LITE ALARMS HONEYWELL MMF3026 6 CLASS B/3 CLASS A 2 WIRE DETECTOR MODULE
The Fire-Lite MMF-302-6 is a six-zone interface module that interfaces Fire-Lite addressable panels with a two-wire conventional detection zone. The module supervises detector zones and external power supply connection. Removable plug-in terminal blocks ensure fast and easy installation. Status indicators are provided for each point. Users have the option of disabling unused addresses. Also known as -Fire-Lite Alarms-Honeywell-Us 6 CLASS B/ 3 CLASS A 2WR DET MD - FL-MMF3026
BG-12LOB FIRE-LITE ALARMS-HONEYWELL-US P-STATION DUAL W/KEY&BACK BX
BG-12LOB FL-BG12LOB FIRE-LITE ALARMS-HONEYWELL-US P-STATION DUAL W/KEY & BACK BX
Honeywell FireLite BG-12S Single Action Manual Pull Station
Manual Pull StationUPC:783008105051SKU:ADIB0015QGH5U
4CHANNELS STAND ALONE
The Fire-Watch 411UDAC from Fire? Lite is a compact, multifaceted, stand-alone or slave Fire Alarm Communicator designed for a variety of fire and non-fire applications. It provides four channels (inputs) that accept water flow devices, two- and four-wire smoke detectors, pull stations, and other normally-open contact devices. The 41UDAC is a cost-effective solution for applications that require an existing (or new) fire alarm control or non-fire control panel to transmit system status to an off-site monitoring facility for Central or Remote Station compliance.
Fire-Lite B200SR-LF
Fire-Lite B200SR-LF SNDR BASE LOW FREQ 200 SERIES COMPAT
Fire-Lite CDRM-300
Fire-Lite CDRM-300 TWO-IN/TWO-OUT MODULE
