FIRSTINFO Offset Automotive Brake Bleeder Wrench 6 Sizes In 1 Set Tool 8 mm, 9 mm, 10 mm,11 mm, 3/8-inch, 7/16-inch
Features: 1. Set for fastening and loosening brake bleeder screws. 2. For 8mm, 9mm, 10mm, 11mm, 3/8-inch, 7/16-inch bleeder screws. 3. For bleeding air from brake cylinders with bleeder screws. 4. Offset design enables working in confined areas, allows access to hard-to-reach bleeder screws with ease. 5. Extra thickness on wrench wall enhances coverage on bleeder valves, preventing undesired brake-off on rusty bleeder screw. 6. Double ended with sizes in metrics and inches for most common vehicles on market. 7. Chrome vanadium steel construction with a fully polished chrome plated finish.
Firstinfo Tools Co., Ltd.
FIRSTINFO Wheel / Stud Bolt Circle Wheel Lug Pattern Gauge with Slide Rule PCD Ruler 3.4.5.6 Lug Bolt Patterns Measurement Tool
**Used to measure pattern size of a wheel or the wheel studs on a vehicle.** Specification: * Wheel lug pattern gauge with slide rule * Works on the popular 3.4.5.6 lug bolt patterns.
Firstinfo Tools Co., Ltd.
FIRSTINFO Air Duster Blow Gun with 11.6~19.6 Inch (295~500mm) Adjustable / Extendable Air Flow Nozzle Dust Blower Cleaner (Extendable)
Specification: 1. Our this item is used to blow dust and must be only worked with an air compressor. 2. It is designed with two colors, also ergonomically designed with grip which provides easy operation. 3. The nozzle length and angle can be extended, which is convenient to work with the narrow place where it is difficult to clean. 4. It is made of fiber reinforced plastics. 5. Max. operating pressure: 170 psi (12kg/cm2) 6. Air inlet: 1/4" 7. Nozzle length: 11.6~19.6 inch (295~500 mm)
Firstinfo Tools Co., Ltd.
FIRSTINFO 4 in 1 Intake Valve Cleaner & Combustion Chamber Cleaner & Vacuum System Cleaner & Vacuum System Pressure Tester Kit
Feature: 1. Cleaning intake valve. 2. Cleaning combustion chamber. 3. Cleaning vacuum system. 4. Testing vacuum system pressure. * Helps increase gas mileage performance and easy to use. * Simply fill with air intake cleaning reagent and connect into vacuum line. * Professional-grade tool provides more thorough cleaning than other methods. * Liquid filled gauge for accurate vacuum reading and monitoring chemical flow.
Firstinfo Tools Co., Ltd.
FIRSTINFO Crankshaft Bearing Remover and Installer Kit / Crank Seal Removal Tool Kit Easily Fitting the Crank Seal
* Do not apply too much strength when using. Also, the strength has to be "average" when applying. * Some cam seals have screws to prevent removal, do not attempt to use this tool to remove by force. * The reason why the design of the thickness is thin is that easy to fit the crank seal. Specification: 1. Comes with 2-piece 118mm long hooks and 2-piece 73mm short hooks. 2. Allows the crank seal to be replaced without dismantling the crank case which can save your time and costs. Don't worry about scraping the crank surface. 3. For universal use for wide car of removing oil seals between For universal use removing of oil seals between 27~80 mm in diameter ; installing range between 21.5~58mm 4. Use the existing bolt in the vehicle for installation. 5. Screw-type adapter to fit the centering. 6. The blue seal adapters are made of aluminum to prevent the damage of crank. 7. The color of the blow case might be changed to red, it won't affect any function. All the contents are the same.
Firstinfo Tools Co., Ltd.
FIRSTINFO Professional 12 Inch Heavy Duty Seal Puller w/ Dual Size Hook Tip Design For Removing Oil & Grease Seals
Features: 1. Use the tool to remove oil and grease seals on automobiles and light trucks. 2. Removal without damaging the housing or bearing. 3. Puller has 2 tip sizes for most applications, allowing removal of hard-to-get-at seals by getting under them. 4. To use, insert tip behind seal and use leverage to remove. 5. The tool is 12" long. 6. Do not use as a striking tool.
Firstinfo Tools Co., Ltd.
FIRSTINFO 1.1 Liter Pneumatic Brake Fluid Vacuum Extractor and Automatic Brake Fluid / Oil Bleeder Pump with Refilling Bottle Kit
**Comes with 1000 c.c. Refilling Bottle** Features: 1. Design to drain the most standard and ABS brake system fast. 2. Efficiently to bleed and flush hydraulic brakes and clutches with vacuum. 3. With integrated silencer to make a messy job cleaner, quicker and quieter. 4. Well-designed set ensures safe extraction without spillage. Dirty fluid is well collected in the bleeder. 5. The refilling bottle with adjustable clamp provides stability for filling. 6. Includes 1 piece 39.3 inch (1 meter) long silicon bleeding hose which is longer than normal one with universal rubber adapter to fit most brake nipples. 7. The bleeding job requires only one person to complete. The filler fills the master cylinder automatically when bleeding the brake fluid. 8. Midget size of the net weight is less than 1 kilogram which makes it easy and convenient to operate and carry. 9. Designed with volume scale guide to be read and controlled more clearly. Specification: * Air Inlet : 1/4" US quick coupler * Avg. Air Consumption : 2 CFM * Working Pressure Range : 40-170 PSI * Working Temperature Range: -3°F-140°
Firstinfo Tools Co., Ltd.
FIRSTINFO Impact Ready Offset Extension Wrench and Low Profile Socket Set, Includes 1/4 Inch and 3/8 Inch Square Drive Adapters and 8mm to 17mm Sockets with 0 Degree Swing Arc for Confined Fasteners
Features: 1. 13.4 inch (340mm) long and 0.625 inch (15.9mm) thick extension drive bar and low profile socket enable easier works in confined spaces, such as water pump, power steering pump, generator, A/C compressor, transmissions, etc. 2. Chain-driven mechanism enhances working durability and smoothness. 3. 1 to 1 gear ratio, turning nuts with zero degrees of arc. 4. Includes 10 pieces low profile sockets ranging from 8 to 17 mm in 3/8” drive. 5. Includes 3 pieces square drive adapters in 1/4” and 3/8”. 6. Max torque allowed: 71.87 Nm / 53 ft-lb 7. Corrosion-Resistant: Chrome plated and mirror polished. 8. Durability: Made from hardened treated chrome vanadium steel alloy (CR-V).
Firstinfo Tools Co., Ltd.
FIRSTINFO 1/2-Inch Drive Locking & Flexible Extendable Ratchet Wrench Reversible,Soft-Grip with 72-Tooth Geared Action (Length: 13.8-19.3 Inches)
Features: 1. STRONG AND DURABLE: Made from heat-treated chrome-vanadium steel. 2. FLEXIBLE HEADS: 180-degree flexible head that allows you to easily reach fasteners at almost any angle. 3. EXTENDABLE HANDLE: Provides a longer reach and increased torque, 13.8 to 19.3 inches (350 to 490 mm). 4. 72-TOOTH MECHANISM: 72-tooth reversible ratcheting mechanism that only needs a 5-degree arc. 5. QUICK RELEASE: A quick-release button on the back of the ratchet head allows effortless socket removal. 6. COMFORT GRIP HANDLE: Each ratchet has a comfort grip chemical resistant handle made with TPR rubber overmold.
Firstinfo Tools Co., Ltd.
FIRSTINFO 3/8" Drive 90.2mm 15 Flutes Oil Filter Wrench, Compatible with Land Rover & Jaguar - Fits 3.0L & 5.0L Gas Engines
Features: 1. Suitable to remove and install oil filter covers. 2. It is compatible with Land Rover LR4, Range Rover, Range Rover Sport. 3. The material is aluminum and surface is plated with chrome. 4. It must work with a 3/8-inch Drive ratchet wrench for manual operation. 5. Size: 15 flutes x 90.2mm 6. Use torque when installing: 25Nm±5Nm
Firstinfo Tools Co., Ltd.
FIRSTINFO Automotive Brake Fluid Bleeder Bleeding Connector Adapter Accessory for FIRSTINFO Brake Bleeder / Extractor / Pump Change Tool Kit
Features:
1.Replacement of the rubber adapter for brake hose and brake bleeder kit.
2. Work With Most Vehicles -- Universal rubber adapter designed to fit most brake nipples, to drain most standard and ABS brake systems.
3. Efficiently For Bleeding Work -- To bleed and flush hydraulic brakes and clutches on cars, motorcycles, ATVs, trucks, etc.
4. Work with FIRSTINFO brake fluid bleeders.
Firstinfo Tools Co., Ltd.
FIRSTINFO Manual Transmission Fluid ATF Oil Refilling Bottle, Suitable for FIRSTINFO ATF Dispenser
Features: 1. Exclusive Design -- ATF Oil Filling Funnel designed for the use for FIRSTINFO ATF Dispenser, such as models A1132NUS, A1135NUS, A1136H, etc. 2. Good Helper For Filling -- 1. Equipped with quick coupler to fit on the dispenser easily; 2. Pour the ATF oil or fluid into the funnel; 3. Open the switch valve to let the fluid flow into the tank. 3. Specification -- Maximum capacity: 1 Liter 4. Clean -- Equipped with the cover to prevent dust when not use.
Firstinfo Tools Co., Ltd.
FIRSTINFO One Way Check Valve 6.5 feet ( 2 Meter ) Automotive Brake Bleeding Hose with Oil Stopper Valve for FIRSTINFO 6.5 & 10 & 15 Liter Oil Evacuator
Specification: * 2 meters / 6.5 feet long silicon brake bleeding hose for FIRSTINFO 6.5 and 15 Liter oil fluid extractor pump. * With one touch controller and universal rubber adapter which can fit most brake nipples. * Designed with non-return check valve to avoid back flow when bleeding.
Firstinfo Tools Co., Ltd.
FIRSTINFO Aerosol Refillable Fluid Oil Pressure Storage Sprayer Can Stainless Steel Pneumatic Manual Compressed, Dual Purpose Nozzle for Jet Straight Stream & Mist Spraying Kit
** DO NOT recommend to use with only air.** Specification: 1. Our stainless steel can sprayer is ideal for using in lubrication, anti-rust, etc. 2. It is 2 function designed for easy to operate. The long type nozzle is suitable for narrow and difficult space spray. 3. It can be refilled pressure with universal adapter for easily to stuff air pressure. 4. Provided with the safety valve on the air inlet setting: pre-setting for 90 Psi(6.3Bar), and the exceed pressure will be release automatically. 5. The material of canister is stainless steel for long life use. Warning: Please do remember not to use with strong chemical or corrosive fluid.
Firstinfo Tools Co., Ltd.
FIRSTINFO Hydraulic Brake Bleeder One Way Check Valve With Hose and Clamp Brake System Bleeding Tools
Features: 1. The one-way check valve allows air and brake fluid to escape, but will not allow air to re-enter the system. 2. Works with most brake bleeder valves. 3. Makes bleeding and servicing hydraulic brakes a one-person job. 4. Saves time and frustration. 5. Note: This tool requires priming and will not bleed air from a dry system.
Firstinfo Tools Co., Ltd.
FIRSTINFO Precision Certified Torque Limiting/Limited Screwdriver, 1/4 Inch Universal Hex Bit Holder Quick Release Design, 10-50 in-lbs with Extra T-Handle
Features: 1. Torque Range: 10-50 in. lbs. 2. Tolerance of Torque: ±6%. 3. 1/4-inch (6.35mm) hex bit holder. 4. Easy-to-read laser torque scale. 5. Feature aluminum scale and tube to reduce weight and enhance durability. 6. Slipping clutch mechanism to prevent over-tightening when reaching the pre-set torque. 7. Ergonomic shape with non-slip and comfortable features. 8. Each torque screwdriver with laser serial number which can be traced easily. 9. Spring-loaded locking collar locks the scale when the torque is setting. 10. All torque screwdrivers are made of the best materials which can reach the exacting tolerance. 11. Quality meets DIN ISO 6789 & ASME B107.300-2010. Materials: * Bit Holder: S45C with electroplating * Hexagon Knob: anodic treatment * Graduated Ring and Tube: aluminum with anodic treatment * Grip: TPR
Firstinfo Tools Co., Ltd.
FIRSTINFO Two Way Air Duster Blow Gun with Adjustable Air Flow and Higher Flow Nozzle
**Convenient to blow dust, stubborn debris, water, and more off of all kinds of materials, machinery, and engine compartments, etc. with FIRSTINFO powerful air blow gun with 150 maximum PSI. Specification: 1. Air Inlet : 1/4". 2. Two-way air inlet -- connect the air hose from either top or bottom to fit your needs. 3. Aluminium blower with 2 different heads. 4. Control the air flow by turning the flow control knob conveniently located above the handle 5. With a the extra-long 4.5 inch nozzle to reach the narrow, hard-to-reach areas; and Light weight (with short nozzle) : 154g 6. Max. Working Pressure : 150 maximum PSI 7. With long trigger for comfortable operating. 8. Constructed with heavy-duty components and a solid, attractive aluminum frame, and comes equipped with an ergonomic contour soft grip.
Firstinfo Tools Co., Ltd.
FIRSTINFO Protective Lug Nut Socket for Mercedes Benz Vehicles with 17mm Convex, Flower Head Lug Nuts
Features: 1. Set for easy removal of Mercedes-Benz wheels. 2. 1/2 Inch Drive 17mm socket, specially designed only for special flower-head Mercedes lug nuts. 3. No damage on wheel nut protection jacket. 4. Compatible with 2007+ Mercedes CL-Class, GL-Class, GLK-Class, GLS-Class, ML-Class, S-Class and Maybach vehicles with 17mm convex, flow head lug bolts. 5. Made of SCM 440 with Phosphate Manganese treatment for maximum durability. 6. Can be used with hand, electric, or air tools.
Firstinfo Tools Co., Ltd.
FIRSTINFO Crankshaft Camshaft Seal Remover Separator Puller with 2 Pairs of Hooks (4.6 Inch Long x 2 + 2.87 Inch Long x 2) Set
** Made in Taiwan with high quality for durable use.** * Please refer to the operation video : https://www.youtube.com/watch?v=BI0zE8hR0X4 * Do not apply too much strength when using. Also, the strength has to be average when applying. * Some cam seals have screws to prevent removal, do not attempt to use this tool to remove by force. * The reason why the design of the thickness is thin is that easy to fit the crank seal. Specification: 1. Comes with 2-piece 118mm long hooks and 2-piece 73mm short hooks. 2. Allows the crankshaft camshaft seal to be replaced without dismantling the crankshaft case, which can save your time and effort. Don't worry about scraping the crankshaft surface. 3. Universal removing use for a wide range of vehicles with camshaft seals or oil seals between 27~80 mm in diameter.
Firstinfo Tools Co., Ltd.
FIRSTINFO Mini Hand Plane Small Lightweight Steel Body Trimming Plane for Woodworking / Trimming / Wood Planing
* Quantity: This list for 1 pcs . SPEC: * Dimension:8.6cm*2.9cm*2.4cm * Durable, lightweight, all steel body. * For trimming and fine finishing of wood surfaces. * Perfect for model making. * Fully adjustable cutter is easily sharpened. Contents: 1 pcs of small wood working planes.
Firstinfo Tools Co., Ltd.
FIRSTINFO Adjustable Universal Pin & Hook Wrench Spanner 11 Piece Shock Absorber Tool Kit with Carrying Case For Suspension Collar, Normal Industrial Use
**Not suitable for heavy duty use-- Do not use for the heavy duty applications.** Specification: 1. Two types : pin and hook for easily operating. Wrenches can be changed with a hook or pin jaw. 2. Use range in diameter from 3/4 inch to 2 inch (19mm to 51mm), 1-1/5 inch to 3 inch (31mm to 77mm), 2 inch to 4-3/4 inch (51mm to 121mm), 4-1/2 inch to 6-1/2 inch (115mm to 166mm). To gain more free movement in small and narrow space. 3. Special ratchet structure handle 4. Heavy duty use is not suitable. 4.Ideal for adjusting Shock Absorber, other machinery’s suspension threaded collars, bearings, locking rings, packing nuts, and normal industrial use.
Firstinfo Tools Co., Ltd.
FIRSTINFO Air Duster Blow Gun with 4.52 Inch (115mm) (Fixed) Air Flow Nozzle Dust Blower Cleaner
Specification: 1. 1. Our this item is used to blow dust and must be only worked with an air compressor. 2. It is designed with two colors, also ergonomically designed with grip which provides easy operation. 3. It is made of fiber reinforced plastics. 4. Max. operating pressure: 170 psi (12kg/cm2) 5. Air inlet: 1/4" 6. Nozzle length: 115mm
Firstinfo Tools Co., Ltd.
FIRSTINFO Aerosol Refillable Fluid Oil Pressure Storage Sprayer Aluminum Can Pneumatic / Manual Pump with 2 Way Nozzles for Stream and Mist Spraying, Pack of 2
** DO NOT recommend to use with only air.** The total shipping quantity is 2 sets. Specification: 1. Our Aluminum can sprayer is ideal for using in lubrication, anti-rust, etc. 2. It is 2 function designed for easy to operate. The long type nozzle is suitable for narrow and difficult space spray. 3. It can be refilled pressure with universal adapter for easily to stuff air pressure. 4. Provided with the safety valve on the air inlet setting: pre-setting for 90 Psi(6.3Bar), and the exceed pressure will be release automatically. 5. The material of canister is Aluminum for long life use. 6. Max capacity is 650 c.c. Warning: Please do remember not to use with strong chemical or corrosive fluid.
Firstinfo Tools Co., Ltd.
FIRSTINFO 7-12mm & 3/8-Inch Drive Brake Fluid Clutch Bleeder Hose w/12 Point Wrench and Check Valve 7-Piece Kit For Brake Bleeding & Hydraulic Clutch Systems
Specification: * Built-in 12 point wrench & socket into one convenient makes loosening and tightening easy. * Ideal for bleeding brake system and hydraulic clutch system without removing the wheels. * 1.2 meters long silicon hose with check valve to avoid backflow for safety operating. * For universal brake nipples. * High quality material internal seal for long life. * With 12pt wrench.
Firstinfo Tools Co., Ltd.
FIRSTINFO Ultra Precision Certified Torque Limiting Screwdriver, 1/4 Inch Universal Hex Quick Release Bit Holder, 5-60 cNm (0.05-0.6 Nm)
Features: 1. Torque Range: 5-60 cNm ( 0.05-0.6 Nm ) 2. Tolerance of Torque: ±6% accuracy 3. 1/4-inch (6.35mm) quick release hex holder. 4. Easy-to-read laser torque scale. 5. Slipping clutch mechanism. 6. Torque setting by twisting the golden adjustment ring. 7. Lock knob holds selected torque value in place. 8. Automatic slip design when the desired torque setting is achieved, the cam mechanism automatically slips to prevent over-tightening. 9. Aluminum alloy body with lightweight benefit. 10. Applied to both clockwise and counterclockwise directions. 11. Ideal for production lines use and especially for small torque demand. 12. Quality meets DIN ISO 6789 & ASME B107.300-2010.
Firstinfo Tools Co., Ltd.
FIRSTINFO Air Duster Blow Gun with Range 8.46 ~ 12 Inch (215-305 mm) Adjustable / Extendable Air Flow Nozzle Dust Blower Cleaner (Extendable)
Specification: 1. Our this item is used to blow dust and must be only worked with an air compressor. 2. It is designed with two colors, also ergonomically designed with grip which provides easy operation. 3. The nozzle length and angle can be adjusted, which is convenient to work with the narrow place where it is difficult to clean. 4. It is made of fiber reinforced plastics. 5. Max. operating pressure: 170 psi (12kg/cm2) 6. Air inlet: 1/4" 7. Nozzle length: 215~305mm
Firstinfo Tools Co., Ltd.
FIRSTINFO Upgraded 10.5 Liter Pneumatic/ Manual Oil Extractor/ Vacuum Pump Oil Changer w/ 6.5ft Brake Fluid Hose with Check Valve + Hoses Storage + Dust Cover
Specification: 1. Easy to operate and suitable for engine oil, brake fluid, water...etc. 2. Suitable for most of domestic and import vehicles on the market. 3. It is provided with fixing valve and safety cup for automatically cuting off extracting. 4. 4 kinds (B.C.D.E) extension nylon tubes can be used to extract any non-corrosive fluid. 5. This extractor is for pneumatic and manual operation, non-spark, non-power, very easy and convenient to operate. 6. It is provided with three air outlets with check valve design which is quick and easy to release the air from the tank. 7. It is provided with new decompression valve which is easy to release the negative pressure. ? Air Inlet: 1/4" US quick connector ? Avg. Air Cons: 2 CFM ? Fluid Temperature Range: 1°C- 95°C (35°F- 200°F) ? Working Pressure Range: 40-170 PSI (2.8-11.7 Bar ; 0.28-1.17 Mpa) Standard Accessories: A -- Brake Bleeding Hose -- 4 x 8 mm with 2 meter ( 78.7 inch ) long with check valve to avoid backflow when bleeding; and with universal rubber adapter which can fit to most brake fitting types. B -- Extractor Main Hose -- 7.8 x 9.8 mm C -- Extension Nylon Tube -- 5.3 x 6.7 mm D -- Extension Nylon Tube -- 4 x 6 mm E -- Extension Nylon Tube -- 3.5 x 4.5 mm
Firstinfo Tools Co., Ltd.
FIRSTINFO 12.5L Pneumatic/Manual ATF Refill System Dispenser Automatic Transmission Fluid Oil Pump with 15-Piece OE Style Transmission Filling Adapters Packed in Storage Case
Features: 1. Designed for refilling auto transmission fluid, gear oil and differential oil. 2. Can be operated pneumatically and manually. 3. Provided with 15 pcs adapters for transmissions without a dipstick, suitable to most vehicles on the market. 4. Tank marked with both liter and US quart. 5. Large tank (12.5 liter / 3.3 gallon) is suitable for transmissions that require volume of ATF. 6. 1500mm-long RoHS PVC filling hose with a quick coupler that can be connected with filling adapters. 7. Temperature range: -40 to 80°C
Firstinfo Tools Co., Ltd.
FIRSTINFO 1/4 Inch Mini Midget Ratchet Pocket Screwdriver, Hexagon Bit Holder, Low Profile Bits Driver Reversible with 72T Gear Action
Features: 1. Compact Size -- 1/4" hexagon bit driver, comes with midget size, 3.8 inch long and 0.37 inch thick driver handle is small enough for operation in confined places/ tight spaces/ tight spot where traditional bit driver, traditional ratcheting screwdriver or stubby screwdriver might be too large or bulky to fit, rendering easy fastening and unfastening with sufficient torque, especially in awkward places like U shape corner, lateral surface, etc. 2. Micro Ratcheting Mechanism -- 72T reversible ratcheting mechanism produces a minimal sweep of 5 degrees. 3. Compatible For Various Usage -- The lightweight bit adapter accepts any 1/4 inch hex bits of all styles. It performs well in confined locations on engines, electronics, household appliances, electrical, industrial machines, aerospace, Steinway pianos, applications that require fine calibration, medical and dental equipment, sound and lighting equipment, and more. 4. Durability -- Made in Taiwan, well aluminum construction for strength and durability. 5. Low Torque Applications -- mini length fits comfortably in hand for low-torque applications.
Firstinfo Tools Co., Ltd.
FIRSTINFO 3 Nm Torque Limited Bit Holder Magnetic Adapter for 1/4" Hex Bits, Using with 12mm Ratchet Wrench or Socket
Features: 1. Practical bit holder adapter for 1/4 inch hex bits, must work with 12mm ratchet wrench or socket for best result. 2. Ideal for tightening screws with preset 3 Nm limited torque to protect your equipment without over-tightening. 3. Designed with magnet inside the hexagon bit holder, optimal fit for a secure hold and easy to change the bits. 4. Compatible with all common bits of different brands, perfect addition and ideal for professional users and hobbyists. 5. Made in Taiwan, constructed of high quality metal for durable use and provide long service life.
Firstinfo Tools Co., Ltd.
FIRSTINFO Manual Auto Brake Disc Depth Gauge Ruller and Tire Tread Depth Gauge 0-60mm Metric Measuring Caliper
Specification: 1. Special device to fix the value you obtain while you measuring the thickness of brake disc. 2. Brake disc measure range: 0 ~ 60mm 3. Measure tire depth. 4. Made of aluminum.
Firstinfo Tools Co., Ltd.
FIRSTINFO Precision Certified Torque Limiting Screwdriver, 1/4 Inch Universal Hex Bit Holder Quick Release Design, 2-12 in-lbs
**Press the locking knob when adjusting the torque; release the locking knob when reaching the setting torque value. Specifications: 1. Torque limiting screwdrivers feature aluminum scale and tube to reduce weight and enhance durability. 2. This torque screwdriver has three features when tightening fasteners: smooth, accurate, and consistent effects. When the torque achieves its maximum, the mechanism will automatically slip to prevent over-tightening. 3. All models have an easy-release bit holder which securely retains bits or sockets during the operation. 4. Clearly laser scale; each torque screwdriver with laser serial no. which can be traced easily. 5. Spring-loaded locking collar locks the scale when the torque is setting. 6. All torque screwdrivers are made of the best materials which can reach the exacting tolerance. *MATERIALS Bit holder:S45C Hexagon Knob: Anodic treatment Graduated ring & amp; tube:aluminum Grip: TPR *MATERIALS Bit holder:electroplating Hexagon Knob: Anodic treatment (yellow) Graduated ring & amp; tube:Anodic treatment (black) *HEATREATMENT Bit holder:HRB 90~94 Hexagon Knob: HRB 25~30
Firstinfo Tools Co., Ltd.
FIRSTINFO 600 N.m. Manual Torque Multiplier 3.4:1 Wrench 1/2 inch Drive ( Male ) to 1/2 inch Drive ( Female ) Adaptor Max. 600 Nm Lug Nut / Labor Saving Tool
Feature: 1. Patented product. 2. Energy-saving tool designed for tire change. 3. Small size, light weight, easy to carry & storage. 4. Input square: 1/2" 5. Output square: 1/2" 6. 3.4:1 torque multiplication. 7. Max. rated output: 600Nm (443Ft-lb) 8. Accuracy tolerance: ±5%. 9. The tool is adapted for tire change of car and van in automotive repair industry. 10. Supplied with the rubber-cover reaction bar for tire rim protection purpose. Details: 1. Input Square(F): The material is CR-V alloy steel. 2. Output Square(M): The material is CR-V alloy steel brings better stability and reliability. 3. 4. Handle: The movable reaction handle is suit for different working place.
Firstinfo Tools Co., Ltd.
FIRSTINFO 6 Liter Manual ATF Refill System Dispenser Automatic Transmission Fluid Oil and Liquid Refill Pump Kit w/ 20-Piece ATF Filler Adapters
Specification:
1. 6 Liter / Quarts of Capacity -- Use to dispense the ATF Auto Transmission Fluid of vehicles. Provide with manual operation for automatic fluid transmission transportation.
2. Convenient And Durable -- Adapters in nylon 6-6 material provides lightweight but also durable features; specially designed tank base for feet to step on to stabilize the tank while pumping.
3. Easy to Use -- Find the suitable adapter and connect to the vehicle. Then connect the adapter with dispensing hose. Push and pull the handle to start the operation.
4. Wide Adapters Application -- Comes with 20 pieces of ATF adapters for refill system. Refilling the universal vehicles. Compatible with Audi, Cadillac, Ford, GMC, Infiniti, Mercedes, Nissan, Toyota, Volkswagen, and Volvo, etc.
5. Convenient Design Tool-- Hose with internal spring to prevent from being kinked; valve on hose end to control pressure and volume to be introduced into transmission. Without any splashing.
Firstinfo Tools Co., Ltd.
FIRSTINFO Upgraded 2 Liter Air Vacuum Brake Fluid Bleeder Pump Extractor w/ Refilling Bottle Kit Includes 4.9 ft Long Silicon Bleeding Hose w/Non-Return Check Valve + Oil Stopper Valve
**The brake lid can't be opened.** Just remove the blue oil outlet cover to drain the old oil out.Features: 1. Design to drain the most standard and ABS brake system fast. 2. Efficiently to bleed and flush hydraulic brakes and clutches with vacuum. 3. With integrated silencer to make a messy job cleaner, quicker and quieter. 4. Well-designed set ensures safe extraction without spillage. Old fluid is well collected in the bleeder. 5. Designed with the fixing valve and safety cup for cutting off extracting automatically. 6. The refilling bottle with adjustable clamp provides stability for filling. 7. Includes 1 piece 59-inch (1.5 Meter) silicon hose which is longer than normal one with universal rubber adapter to fit most brake nipples. Also with check valve to avoid back-flow when bleeding. 8. The bleeding job requires only one person to complete. The filler fills the master cylinder automatically when bleeding the brake oil. 9. Midget size of the net weight is less than 1 kilogram which make it easy and convenient to operate and carry. 10. Designed with volume scale guide to be read and controlled more clearly. * Air Inlet: 1/4" * Avg. Air Consumption: 2 CFM * Operating Pressure: 40~170 PSI * Working Temperature: -3°F~140°F * Max. Capacity: 2 liters (0.52 gallon)
Firstinfo Tools Co., Ltd.
FIRSTINFO 1.1 Liter Pneumatic Brake Fluid Vacuum Extractor and Automatic Brake Fluid / OIil Bleeder Pump Tool
Features: 1. Design to drain the most standard and ABS brake system fast. 2. Efficiently to bleed and flush hydraulic brakes and clutches with vacuum. 3. With integrated silencer to make a messy job cleaner, quicker and quieter. 4. Well-designed set ensures safe extraction without spillage. Dirty fluid is well collected in the bleeder. 5. Includes 1 piece 39.3 inch (1 meter) long silicon bleeding hose which is longer than normal one with universal rubber adapter to fit most brake nipples. 6. The bleeding job requires only one person to complete. The filler fills the master cylinder automatically when bleeding the brake fluid. 7. Midget size of the net weight is less than 1 kilogram which makes it easy and convenient to operate and carry. 8. Designed with volume scale guide to be read and controlled more clearly. Specification: * Air Inlet : 1/4" US quick coupler * Avg. Air Consumption : 2 CFM * Working Pressure Range : 40-170 PSI * Working Temperature Range: -3°F-140°
Firstinfo Tools Co., Ltd.
FIRSTINFO Low Profile Go-Through Socket Wrench 52 Pcs Set, 1/4" 3/8" 1/2" Wrench, Spline Sockets For Damaged Fasteners
Features: 1. Go-Through Socket Set -- Low profile offset handle with insert-snap heavy duty ratchet and go-thru spline sockets, ideal for tight work spaces and maximum hand clearance. 2. Spline Socket -- Spline shape works on 8 fasteners: spline, 6-point metric, 6-point SAE, 12-point metric, 12-point SAE, 30% rounded, square, E-Torx, and even on rounded fasteners. 3. Perfect For Damaged Fasteners -- Non-slip feature on the open end enables ease of use and can be used on extracting damaged fasteners, bolts, lug nuts and more. 4. Multi-Function Use -- Set includes 3 pieces of quick release socket adapters (1/4", 3/8", 1/2" drive), which convert insert-snap ratchet to regular ratchet wrench for the use of your regular sockets. 5. Durability -- Constructed from heat-treated chrome vanadium steel with mirror polish that is resistant to corrosion. Ergonomic rubber handle for comfortable grip and easy operation.
Firstinfo Tools Co., Ltd.
FIRSTINFO Precision Certified Torque Limiting Screwdriver, 1/4 Inch Universal Hex Bit Holder, 5-25 in-lbs with Extra T-Handle
**Press the locking knob when adjusting the torque; release the locking knob when reaching the setting torque value. Specifications: 1. Torque limiting screwdrivers feature aluminum scale and tube to reduce weight and enhance durability. 2. This torque screwdriver has three features when tightening fasteners: smooth, accurate, and consistent effects. When the torque achieves its maximum, the mechanism will automatically slip to prevent over-tightening. 3. All models have an easy-release bit holder which securely retains bits or sockets during the operation. 4. Clearly laser scale; each torque screwdriver with laser serial no. which can be traced easily. 5. Spring-loaded locking collar locks the scale when the torque is setting. 6. All torque screwdrivers are made of the best materials which can reach the exacting tolerance. *MATERIALS Bit holder:S45C Hexagon Knob: Anodic treatment Graduated ring & amp; tube:aluminum Grip: TPR *MATERIALS Bit holder:electroplating Hexagon Knob: Anodic treatment (yellow) Graduated ring & amp; tube:Anodic treatment (black) *HEATREATMENT Bit holder:HRB 90~94 Hexagon Knob: HRB 25~30
Firstinfo Tools Co., Ltd.
FIRSTINFO 1 Liter Brake Service / Universal Automatic Brake Fluid Dispensing Refilling Bottle Bleeder Bottle
Features: 1. Capacity: 33 oz (1 Liter) 2. Used for brake fluid dispensing or refilling; ideal for heavy-duty motorcycle, automotive. 3. Universal design fits most master cylinders and is used to prevent spills. 4. The refilling bottle with an adjustable swivel clamp provides stability for filling.
Firstinfo Tools Co., Ltd.
FIRSTINFO 60mm Pad for FIRSTINFO Air Hose Suction Paintless Dent Puller Remove Tool for our A1501 series
Specification: 1. 60mm in diameter suction pad for FIRSTINFO air suction dent puller, such as models A1501US, A1501USY1, A1501USY6. 2. It must be worked with an air compressor. 3. Use on the round and smooth surface to reach the max effect. 4. Must be used with FIRSTINFO air dent puller for the best results.
Firstinfo Tools Co., Ltd.
FIRSTINFO High Quality Auto Body / Car Body Sheet Metal Plate Butt Joint Welding Soldering Clamps Door Skin Panel Fender
* This item is 4 pieces in one set. Specification: 1. A simple and efficient way of ensuring a perfect welded butt joint. 2. Holds panels' edge to edge with almost no gap which allows full penetration of the weld. 3. Patented level adjustment allows accurate joining of dissimilar thicknesses of materials. 4. Level adjustment allows flat alignment of top or bottom surface of panels. 5. Level adjusts between 0 and 3mm either side.
Firstinfo Tools Co., Ltd.
FIRSTINFO Powerful Auto Suction Cup Dent Puller/ 125 mm Lifter and Glass Moving, Lifting with Aluminum Carrying Handle
Specification: 1. This tool is used as manual auto sheet metal dent puller or suction lifter. 2. The handle is made of aluminum. 3. The longitudinal holes in the articulated joints allow the transport of surfaces which are curved beyond standard such as those found on some automobile windscreens. 4. It can only used with the object which is dry. 5. Diameter: 125mm (4.92") 6. Powerful suction can load 20 kgs object. 7. The dent dimension must be larger than the pad, and the surface must be flat to be sucked by the pad easily.
Firstinfo Tools Co., Ltd.
FIRSTINFO 3 Liter Manual Brake Fluid Pressure Bleeder One Person Manual Pump Operation
Features: 1. Convenient For One Person Operation -- Do the brake bleeding by pressurizing the brake system from master cylinder, no need to constantly watch the fluid level as you manaully pump the tank and simply open the bleeder screw. 2. Safer Design For Job -- Built in pressure gauge to allow you easily monitor the pressure in the system; also equipped with pressure release valve to release the remaining pressure inside the tank after use. 3. Master Cylinder Adapter -- Equipped with standard European adapter with a swivel 90° fitting to tackle limited space problems. This brake fluid bleeder is designed to work with disc or drum brakes and the bleeder also comes with an adapter that works for most master cylinder reservoirs. 4. Save Your Time -- One man use makes brake fluid change quick and easy. 5. Heavy Duty -- Corrosion-proof materials and design ensures power bleeder to be maintenance free for years of service.
Firstinfo Tools Co., Ltd.
