Hangman Products L-48-W Hangman L-48-w 48-inch No-stud Floating Shelf [white
Hangman Products L-48-W Hangman L-48-w 48-inch No-stud Floating Shelf [white condition: New Brand: Hangman Products MPN: l-48-w Type: TV Stands & Mounts
Hangman S-2065 26-Inch to 65-Inch No Stud TV Hanger
Hangman S-2065 26-Inch to 65-Inch No Stud TV Hanger & bull; For 26 in. to 65 in. flat panel TVs; & bull; Holds up to 80 lbs.; & bull; No studs or anchors required--installs directly into drywall, plaster, or paneling; & bull; UL(R) listed; & bull; Built-in bubble level; & bull; Fits VESA(R) spacing up to 600; & bull; Patented design and made in the USA of 85% US components; & bull; Includes 2 aircraft-grade aluminum no stud 26 in. mounting brackets (1 for wall, 1 for TV), bubble level, nails, washers, bolts, 1 security cable with screw;
Hangman NO STUD HANGER Monitor Mount, Up to 55, Black (S2040-A UL) HANS2040A
Hangman NO STUD HANGER Monitor Mount, Up to 55, Black (S2040-A UL) HANS2040A
The Hangman 18'' No-Stud TV Mount will mount any LED thin screen TV in less time than it takes to unpack it. It consists of two interlocking aircraft-grade aluminum brackets. One bracket attaches to the back of the TV and the other bracket installs on the wall. Once installed, a 1" clearance from the wall provides easy access and space for cords and cables. The wall track has a foam backing to minimize wall damage. Once removed, all that is left behind are tiny pinholes that can be easily covered up. Comes in black anodize finish. The Hangman 18'' No-Stud TV Mount will mount any LED thin screen TV in less time than it takes to unpack it. It consists of two interlocking aircraft-grade aluminum brackets. One bracket attaches to the back of the TV and the other bracket installs on the wall. Once installed, a 1" clearance from the wall provides easy access and space for cords and cables. The wall track has a foam backing to minimize wall damage. Once removed, all that is left behind are tiny pinholes that can be easily covered up. Comes in black anodize finish. Fits 26" - 48" TVs. Low profile. Installs in 10 minutes. Requires no studs, anchors or screws. Holds up to 80lbs. Requires hammer & screwdriver to install. Will not damage walls. Aircraft-grade aluminum 18" brackets in black anodized finish. 1" clearance allows room for cables. Includes: security cable, hardware & level. Patented & made in the USA. UL listed. Dim: 7.87"H x 15.75"L. Dimensions: 18.4"L x 7"W x 1.3"D.
• Fits 26" - 48" TVs. Low profile. Installs in 10 minutes. Requires no studs, anchors or screws.
• Holds up to 80lbs. Requires hammer & screwdriver to install. Will not damage walls. Aircraft-grade aluminum 18" brackets in black anodized finish.
• 1" clearance allows room for cables. Includes: security cable, hardware & level. Patented & made in the USA.
• UL listed. Dim: 7.87"H x 15.75"L. Dimensions: 18.4"L x 7"W x 1.3"D.
hangman heavyduty mirror and picture hanger with walldog anchorless screws aluminum: hm30d
With the 30-Inch heavy duty Hangman mirror and picture hanger with WallDog anchorless screws you can quickly and easily hang mirrors, pictures and wall decor up to 300-Pound. The Hangman Products removable bubble level is included and the Hangman System supplies all the hardware needed for wall installation. The brackets are heavy-duty aluminum. Mounting holes are punched on 4-Inch centers. UPC NO: 681391206037 SKU: ADIB000VWAYQC
Hangman L-42-C 42-Inch No-Stud Floating Shelf (Clear Anodized)
Hangman L-42-C 42-Inch No-Stud Floating Shelf (Clear Anodized) Installs in minutes Only tool required is a hammerSolid aluminum with durable finishRustproofEasy to cleanHangs flush--no sagging or droopingHolds 55 lbs. Includes 41.87 in. Floating Shelf (TM) and 36 in. wall bracket with nails and bubble levelClear Anodized42-Inch No-Stud Floating Shelf (TM) (Clear Anodized)
Hangman L-36-C 36-Inch No-Stud Floating Shelf (Clear Anodized)
Hangman L-36-C 36-Inch No-Stud Floating Shelf (Clear Anodized) Installs in minutes Only tool required is a hammerSolid aluminum with durable finishRustproofEasy to cleanHangs flush--no sagging or droopingHolds 50 lbs. Includes 35.87 in. Floating Shelf (TM) and 30 in. wall bracket with nails and bubble levelClear Anodized36-Inch No-Stud Floating Shelf (TM) (Clear Anodized)
Hangman L-30-W 30-Inch No-Stud Floating Shelf (White Powder Coat)
Hangman L-30-W 30-Inch No-Stud Floating Shelf (White Powder Coat) & bullInstalls in minutes & bullOnly tool required is a hammer & bullSolid aluminum with durable finish & bullRustproof & bullEasy to clean & bullHangs flush--no sagging or drooping & bullHolds 45 lbs. & bullIncludes 29.87 in. Floating Shelf (TM) and 24 in. wall bracket with nails and bubble level & bullWhite Powder Coat30-Inch No-Stud Floating Shelf (TM) (White Powder Coat)
Hangman L-18-W 18-Inch No-Stud Floating Shelf (White Powder Coat)
Hangman L-18-W 18-Inch No-Stud Floating Shelf (White Powder Coat) & bullInstalls in minutes & bullOnly tool required is a hammer & bullSolid aluminum with durable finish & bullRustproof & bullEasy to clean & bullHangs flush--no sagging or drooping & bullHolds 30 lbs. & bullIncludes 17.87 in. Floating Shelf (TM) and 15 in. wall bracket with nails and bubble level & bullWhite Powder Coat18-Inch No-Stud Floating Shelf (TM) (White Powder Coat)
HANGMAN(R) L-18-C 18-Inch No-Stud Floating Shelf (Clear Anodized)
HANGMAN (R) L-18-C 18-Inch No-Stud Floating Shelf (Clear Anodized) & bullInstalls in minutes & bullOnly tool required is a hammer & bullSolid aluminum with durable finish & bullRustproof & bullEasy to clean & bullHangs flush--no sagging or drooping & bullHolds 30 lbs. & bullIncludes 17.87 in. Floating Shelf (TM) and 15 in. wall bracket with nails and bubble level & bullClear Anodized18-Inch No-Stud Floating Shelf (TM) (Clear Anodized)
Hangman L-48-W 48-Inch No-Stud Floating Shelf (White Powder Coat)
Hangman L-48-W 48-Inch No-Stud Floating Shelf (White Powder Coat) & bullInstalls in minutes & bullOnly tool required is a hammer & bullSolid aluminum with durable finish & bullRustproof & bullEasy to clean & bullHangs flush, no sagging or drooping & bullHolds 60 lbs. & bullIncludes 47.87 in. Floating Shelf (TM) and 42 in. wall bracket with nails and bubble level & bullWhite Powder Coat48-Inch No-Stud Floating Shelf (TM) (White Powder Coat)
Hangman L-36-W 36-Inch No-Stud Floating Shelf (White Powder Coat)
Hangman L-36-W 36-Inch No-Stud Floating Shelf (White Powder Coat) & bullInstalls in minutes & bullOnly tool required is a hammer & bullSolid aluminum with durable finish & bullRustproof & bullEasy to clean & bullHangs flush--no sagging or drooping & bullHolds 50 lbs. & bullIncludes 35.87 in. Floating Shelf (TM) and 30 in. wall bracket with nails and bubble level & bullWhite Powder Coat36-Inch No-Stud Floating Shelf (TM) (White Powder Coat)
HANGMAN 36" High Quality Aluminum Mini Cord Management Strip with Connector (CMM-36)
HANGMAN 36" High Quality Aluminum Mini Cord Management Strip
Model: CMM-36
The Hangman Cord Management organizes and hides unsightly cords using a
modern design. This high quality all aluminum cord management system can be
painted to match any wall color using household paint.
Hardware Information
ALUMINUM
PAINTABLE
SCREWS
CONICAL ANCHORS
FLUSH CONNECTOR
HANGMAN 24" High Quality Aluminum Mini Cord Management Strip with Connector (CMM-24)
HANGMAN 24" High Quality Aluminum Mini Cord Management Strip
Model: CMM-24
The Hangman Cord Management organizes and hides unsightly cords using a
modern design. This high quality all aluminum cord management system can be
painted to match any wall color using household paint.
Hardware Information
ALUMINUM
PAINTABLE
SCREWS
CONICAL ANCHORS
FLUSH CONNECTOR
Hangman Ultra-Slim Fixed Wall Mount for 26 to 48 inch LED/LCD TVs (S2040-A)
Hangman S2040-A UL 26-55 Simple, No-Stud Flat Panel HangerHangs almost any 26-55 TV without damaging walls No studs, anchors or drillsInstalls in minutes by almost anyone1 clearance provides access for cords, cables & adjusts left or right after installationAircraft-grade aluminum bracketsUL listed for 80lbsIncludes all hardware, level & security cableMade in the USA26-55 Simple, No-Stud Flat Panel Hanger
Hangman Ultra-Slim Fixed Wall Mount for 32 to 80 inch LED/LCD TVs (S2060)
Hangman Ultra-Slim Fixed Wall Mount for 32 to 80 inch LED/LCD TVs Model: S2060 The Hangman Simple Mount TV Hanger will hang any LED thin screen TV in less time than it takes to unpack it. Consists of two interlocking aircraft-grade aluminum brackets. One bracket attaches to the back of the TV and the other bracket installs on the wall. The galvanized aircraft-grade wire locks your TV in place. Once installed a 1" clearance from the wall provides easy access and space for cords and cables. The wall track has mounting holes every inch that ensures hitting at least one stud for additional support. The TV hanger can be installed into most building materials including drywall, lath and plaster, wood studs, brick, concrete and plaster. Kit includes Toggler Snap Toggle anchors and all hardware for installation. Comes in Black Annodize Finish. Patented & UL Rated. Hardware Information BUILT IN LEVEL HANGS 32" - 80" FLAT-TV 1" CLEARANCE FROM THE WALL WALL TRACK HAS HOLES EVERY 1Ó FOR EASY INSTALLATION TO STUDS INSTALLS INTO MOST BUILDING MATERIALS INCLUDES SELF DRILLING STUD SCREWS AND 2 SNAP TOGGLE WALL ANCHORS SECURITY CABLE INCLUDED BLACK ANNODIZE FINISH LEFT AND RIGHT ADJUSTMENT 4Ó UL RATED TO HOLD 125 LBS. EASY TILT FOR ACCESS TO CABLES
Rechargeable Battery Pack Compatible with UNIDEN GMR14382 GMR14382CK GMR28722CK GMR1558 GMR15582ck GMR1588 GMR15882ck TwoWay Radio
Compatible With Uniden GMR1558 GMR1558-2ck GMR1588 GMR1588-2ck GMR1438-2 GMR1438-2CK GMR2872-2CK, UNIDEN BP-38 / BP38 Replacement, Compatible With UNIDEN GMR1038 GMR1038-2 GMR1038-2CK GMR1048 GMR1048-2CK GMR2238-2CK GMR1088-2CK GMR1058 GMR1058-2CK GMR1058-4CK GMR1448 GMR1448-2CK GMR1595 GMR1595-2CK GMR1838 GMR1838-2CK GMR2059 GMR2059-2CK GMR2089 GMR2089-2CK GMR645 GMR645-2CK GMR648 GMR648-2CK GMR885 GMR885-2CK GMRS380 GMRS380-2 Two-Way Radio
Hangmanr L-12-B 12In Floating Shlf Blk
Hangmanr L-12-B 12In Floating Shlf Blk condition: New Brand: HANGMAN(R)Manufacturer Part Number: L-12-B
H202 Portable AMFMWeather Alert Bluetooth Digital Tuning Waterproof Shower Radio
Style: Radio with Bluetooth & nbsp; | & nbsp; Configuration: SingleH-202 AM/FM/Bluetooth Waterproof/Shower Radio
54inch Selfie Stick Tripod Detachable and Extendable Phone Tripod for Cell Phone Compatible with Smartphone Includes Wireless Remote Cell Phone Holder and Gopro Adapter
No Need For A Separate Selfie Stick And Tripod. We Have You Covered With An All-In-One Professional Selfie Stick Tripod Combo. Great For Group Photos, Facetime, Adventure Shots, Instagram, Facebook Live, Vlogging.
Verizon Fios 12V 8Ah UPS Battery This is an Brand Replacement
Battery is compatible with these Brands: Verizon. IMPORTANT: You MUST RE-USE: your existing cabling and hardware. These are replacement batteries only. NOTE: It is your responsibility to verify the batteries being ordered match the batteries in your unit prior to placing your order. We are not responsible for incorrect orders. Chemistry: Sealed Lead Acid (AGM). Warranty: 1 Year. DISCLAIMER: Our products are not affiliated with or authorized by Verizon.
DVD Storage Box with Powerful Magnetic Opening DVD Tray Holds 28 DVD BluRay PS4 Video Games for Media Shelf Storage amp Organization
GET ORGANIZED! This beautifully designed Faux Leather Stacking DVD Storage Shelf is an excellent storage solution that offers style, versatility and convenience to help you create the most organized, space-efficient DVD management system possible. STYLISH AND FUNCTIONAL! Featuring a rugged faux leather exterior with a deep chocolate brownfinish and complementary caramel colored stitching, this stacking DVD storage shelf includes integrated handles for comfortable convenient carrying, and the open front panel allows you to read the titles of your DVDs without any fuss. ORGANIZE AND PROTECT! The soft felt interior will not scratch or damage DVD cases, and the durable, strong design provides for optimal protection. STACKABLE! Use it to create a media storage system that can be custom tailored to fit your DVD collection and available storage space. Each shelf can accommodate up to 28 DVDs or Blue-Ray discs. Interlocking lips allow multiple units to be stacked atop one another. BUY MULTIPLES AND GET YOUR DVDS ORGANIZED TODAY!
1Port MultiFunction Print Server TE100MP1UN White
The 1-Port Multi-Function Print Server turns once standalone multifunction USB printer/fax/scanners into a shared resource on your network. Unlock the power of your multi-function printer by giving everyone on your Local Area Network full control over the device from their workstation. Experience print, scan and fax simplicity with an intuitive management interface. LED indicators, bi-directional support and email notifications improve the user experience. Works with most Windows based operating systems.
Bike OutFront Mount Bicycle Handlebar Combo Mount for Garmin Bryton Gopro FlashlightCompatible with 318mm 254mm Handlebar red
Packing List: 1 x Bike Extension Bracket (for garmin and gopro) 1 x Mounting Base for Bryton 1 x Mounting Base for Cateye 1 x Allen Wrench 1 x set 25.4 mm adapter 1 x Flashlight Clip
Instax Mini 9 Instant Camera - Flamingo Pink (Renewed)
Color: Flamingo PinkThe new, Instax Mini 9 camera retains the ease of use and attractive design elements of the extremely popular Instax Mini 8 while adding five new exciting colors and a couple of new features. The new colors are: Flamingo Pink, Ice Blue, Lime Green, Cobalt Blue and Smokey White. The new, Instax Mini 9 features a selfie mirror for the perfect selfie photo every time. Close up macro photos are now easier thanks to the included close-up lens adapter which allows you to focus on subjects as close as 35-50cm. The Instax Mini 9 retains all of the other great features found in the Mini 8 including: Automatic exposure measurement. The camera signals the recommended aperture setting with a flashing LED light and the user can manually adjust the dial to the recommended setting. This helps the user capture the perfect photo every time. The High-Key mode enables consumers to take brighter pictures with a soft look -perfect for portraits.
com Component Video and Toslink Audio to HDMI Converter Video Converter HDMI CPNTTOS2HDMI
This Component and Toslink to HDMI converter allows you to connect the YCbCr/YPbPr output from a DVD player or Set-Top box to an HDMI capable display, providing HDTV resolutions of up to 1080p - an economical solution for consolidating standard or high definition A/V connections and digital audio into a single, convenient HDMI connection.
Magma Products 7 Piece Nested Stainless Steel Non Stick Oven Safe Cookware Set
& bull; Nested cookware stores easily and saves cabinet space & bull; Scratch-resistant and durable stainless steel & bull; Ceramic, non-stick interior & bull; Tri-clad bottoms made of stainless steel, aluminum, and magnetic stainless steel & bull; Milled flat for superior even heat distributionMade of 18-10 mirror polished Stainless Steel, Magma’s cookware sets are designed using Ceramica non-stick coating for use with Induction cooking systems. Sets completely nest and store in less than 0.5 cubic feet of cabinet space.
The Heavy Duty Non-Toxic, PFOA, and PTFE free, Slate Black, Ceramica non-stick is remarkably easy to clean, will not stain, peel, blister, and nothing sticks to it. The encapsulated triple-clad bottoms, made from stainless steel, aluminum, and magnetic stainless steel, are milled perfectly flat for superior even heat distribution. The triple-clad bottoms outer layer uses the highest quality ferromagnetic stainless steel, specifically used to activate the magnetic field in all Induction cooking surfaces.
Cook all your favorite meals with ease thanks to the 7-Piece Nested Cookware Set from Magma.
Magma Products 7 Piece Stainless Steel Milled Flat Nesting Kitchen Cookware Set
& bull; Nesting cookware set saves cabinet space & bull; Pots feature sealed triple clad bottoms & bull; Bottoms milled flat for even heat distribution & bull; Use on gas, electric, or ceramic cooking surfaces & bull; Oven safe and dishwasher friendlyCook all of your favorite meals while saving on space thanks to the 7-Piece Nesting Cookware Set from Magma Products.
Made of 18-10 mirror polished Stainless Steel, Magma’s cookware sets are designed for use with Induction cooking systems. Sets completely nest and store in less than 0.5 cubic feet of cabinet space.
The encapsulated triple-clad bottoms, made from stainless steel, aluminum, and magnetic stainless steel, are milled perfectly flat for superior even heat distribution. The triple-clad bottoms outer layer uses the highest quality ferromagnetic stainless steel, specifically used to activate the magnetic field in all Induction cooking surfaces. Thumb release trigger handles easily attach and detach with just one hand.
Cooking is made easy, fun, and clean-up is a breeze thanks to this 7-Piece Nesting Cookware Set from Magma Products.
Magma Products 10 Piece Nesting Milled Flat Stainless Steel Kitchen Cookware
Number of Pieces: 10Warranty: 1 Year Limited Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Nested cookware stores easily and saves cabinet space & bull; Scratch-resistant and durable stainless steel & bull; Tri-clad bottoms made of stainless steel, aluminum, and magnetic stainless steel & bull; Milled flat for superior even heat distribution & bull; Oven and dishwasher safeMake cooking seamless with the 10 Piece Nesting Set from Magma.
The quality and value you've come to expect from all Magma products now in this 10-piece stainless steel cookware set that nests for storage in less than 1/2 cubic foot of cabinet space. The set includes three Saucepans, a lid that fits all three saucepans, a stock Pot, a sauté and fry pan, a lid for the stock pot and sauté and fry Pan, 2 removable handles, and a convenient “bungee” storage cord. All have triple clad bottoms (stainless steel, aluminum, stainless steel) and are milled perfectly flat for even heat distribution on gas, electric or ceramic cooktops. All the cookware is oven safe and dishwasher friendly.
Cooking is made easy with this 10 Piece Nesting Set from Magma.
Magma Boat Marine 31" Bait/Filet Mate Fish Cleaning Cutting Table Board & Mount
Dimensions (Overall): 31 inches (L), 4 inches (H) x 13 inches (W)Weight: 12 poundsFishing type: Conventional FishingMaterial: PolyethyleneWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; FDA approved for food preparation and service & bull; Will not crack, peel, mildew, or absorb bacteria or fish odors & bull; Grooved sides and slotted table back for overboard drainage & bull; Includes convenient engraved ruler, pliers storage, and knife holsters & bull; Folds flat for easy storageMeasure, clean, and cut your fresh catch on the Magma Boat Bait/Filet Mate Table. This fish cutting board mounts to your boat's fishing rod holder so you have your own fish cleaning station wherever you troll.
Pull in your catch and flop it onto this bait table. Measure the fish using the integrated ruler. The ruler extends to 30 inches, long enough for you to measure common lake and ocean fish. Store your pliers and cleaning knives on the side of this handy bait and filet mate table. There are dedicated grooves for each.
The bait/filet mate board comes with a boat mount. This mount fits into most fishing rod holders for easy installation.
This boat fish cleaning table is FDA-approved for food preparation. The materials won't crack, peel, mildew, or absorb bacteria or fish odors so you can use it season after season. Clean up after your fish prep easily thanks to its grooved sides and slotted table back. These slots let you drain and discard fish bits overboard.
Get everything you need to prepare your catch for the table in this Magma Boat Bait/Filet Mate Table.
Magma Boat Marine 20" Bait/Filet Mate Fish Cleaning Cutting Table Board & Mount
Dimensions (Overall): 25 inches (L), 3 inches (H) x 15 inches (W)Weight: 7 poundsFishing type: Conventional FishingMaterial: PolyethyleneWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; FDA approved for food preparation & bull; Includes LeveLock rod holder mount & bull; Serve food or filet fish & bull; Back slot permits water drainage & bull; Material will not absorb fish odorMeasure, clean, and cut your fresh catch on the Magma Boat Bait/Filet Mate Table. This fish cutting board mounts to your boat's fishing rod holder so you have your own fish cleaning station wherever you troll.
Pull in your catch and flop it onto this bait table. Measure the fish using the integrated ruler. The ruler extends to 20 inches, long enough for you to measure common lake and ocean fish. Store your pliers and cleaning knives on the side of this handy bait and filet mate table. There are dedicated grooves for each.
The bait/filet mate board comes with a boat mount. This mount fits into most fishing rod holders for easy installation.
This boat fish cleaning table is FDA-approved for food preparation. The materials won't crack, peel, mildew, or absorb bacteria or fish odors so you can use it season after season. Clean up after your fish prep easily thanks to its grooved sides and slotted table back. These slots let you drain and discard fish bits overboard.
Get everything you need to prepare your catch for the table in this Magma Boat Bait/Filet Mate Table.
Magma Products 10 Piece Stainless Steel Gourmet Nesting Kitchen Cookware Set
Number of Pieces: 10 & bull; Nesting cookware set saves cabinet space & bull; Pots feature sealed triple clad bottoms & bull; Bottoms milled flat for even heat distribution & bull; Use on gas, electric, induction, or ceramic cooking surfaces & bull; Oven safe and dishwasher friendlyCook all of your favorite meals while saving on space thanks to the 7-Piece Nesting Cookware Set from Magma Products.
Made of 18-10 mirror polished Stainless Steel, Magma’s cookware sets are designed for use with Induction cooking systems. Sets completely nest and store in less than 0.5 cubic feet of cabinet space.
The encapsulated triple-clad bottoms, made from stainless steel, aluminum, and magnetic stainless steel, are milled perfectly flat for superior even heat distribution. The triple-clad bottoms outer layer uses the highest quality ferromagnetic stainless steel, specifically used to activate the magnetic field in all Induction cooking surfaces. Thumb release trigger handles easily attach and detach with just one hand.
Cooking is made easy, fun, and clean-up is a breeze thanks to this 7-Piece Nesting Cookware Set from Magma Products.
Magma A10-1292 Padded 12 x 18 Inch Rectangular Grill Gear Carrying Case, Black
Dimensions (Overall): 15.2 inches (H) x 16 inches (W)Weight: 2 poundsAssembly Details: No Assembly RequiredMaterial: Textile 1: PolyesterWarranty: 1 Year Limited Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 600-Denier polyester fabric and padded main compartment & bull; Designed to fit Magma 12 x 18-inch rectangular grills & bull; Thick padding to protect both your grill and accessories & bull; Additional storage compartments for various accessories & bull; 1.5-inch thick nylon webbing handles and reinforced, padded shoulder strapTaking your portable Magma grill from home to the barbecue can be easier than ever with this Magma A10-1292 Padded 12 x 18-Inch Rectangular Grill Carrying Case. Even better, you can keep your propane grill and all the gear that goes with it organized and protected too.
This Magma padded grill carrying case is designed to store all of your grilling gear in a single space-saving location. This case is outfitted with a large storage compartment for a 12 x 18-inch grill, plus pockets for storing a serving shelf, griddle, and fish/veggie tray (not included).
This grill gear bag also has an additional side pocket for carrying a pair of 1-pound propane canisters and pair of control valve regulators. The thick polyester, padded nylon handles, and padded shoulder strap give you a case that's easy to carry and durable enough to last for years.
Magma Products Marine Kettle Boat Steel BBQ Barbecue Charcoal Grill, Party Size
Dimensions (Overall): 12.1 inches (H) x 17.7 inches (W) x 17.7 inches (D)Weight: 11 poundsMaterial: Stainless Steel (Frame)Handle Material: Stainless SteelLid Material: Stainless SteelCooking Grate Material: Stainless SteelAssembly Details: Adult Assembly Required, No Tools NeededModel #: A10-114Grill surface area: 1 square inchesMaximum Heat Output: 75000 btuPower Source: CharcoalBattery: No Battery UsedWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Charcoal grill with variable draft door temperature control & bull; Balanced hinge lid will not slam shut & bull; Stay cool handle is all weather and heat resistant & bull; Sealed grill body keeps grease and ash contained & bull; Hinged lid acts as a windshield in gusty conditionsGrill your fresh caught fish while you're out on the water with the Magma Marine Kettle Charcoal Grill. As the party size, this grill has a 15-inch cooking grate and 17-inch total diameter.
This marine grill mounts onto your boat for cooking wherever the current takes you. To mount, you'll need to pick up the mounting hardware (not included).
The time-tested original charcoal “Marine Kettle” grill now has a hinged lid. The rotating lid design allows you to determine which direction you would like the lid to open when grilling in windy conditions. Grill your tasty morsels perfectly with this boat barbecue grill thanks to the variable temperature control.
The Marine Kettle's enclosed design allows oven-type baking to enhance the grill flavor while retaining the natural juices of the food. It will cook more food faster, on less grill area, than any other charcoal grill. Safety and efficiency are obtained by closing the draft door and extinguishing the coals for future use.
It is meticulously crafted of 100 percent 18-9 mirror polished stainless steel for maximum corrosion resistance.
Magma Products Rail Mounted Kayak, SUP, or Water Toy Storage Rack w/ 2 Tie Downs
Overall Length: 17.45 inchesWeight: 9.4 poundsCPSC Choking Hazard Warnings: Choking_hazard_small_partsMaterial: Stainless SteelWarranty: 1 Year Limited Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Convenient storage for kayaks, SUPs, or water toys & bull; Adjusts easily for all different sizes & bull; Folds flat along rail when not in use & bull; 2 tie-down points on each arm & bull; Includes UV resistant foam paddingNo more tripping over your kayak or paddleboard when they are stored on deck or lugging them around after a long day on the water. With Magma’s new Kayak / SUP Boat Rack your problems are solved.
This convenient storage rack easily attaches to straight or tapered, vertical or diagonal rails and is constructed from 1-inch diameter, 304 marine grade mirror polished stainless steel tubing and attachment hardware. Designed to fit rails from 7/8-inch to 1-1/2-inch diameter and is wide enough to fit all of the most popular kayak or board sizes. Magma’s exclusive quick release knob system allows each arm to be instantly rotated out of the way when not in use or swung in tighter to fit smaller/narrower kayaks or boards. Each arm comes with pre-installed UV resistant padding and has two tie-down points for attaching securing straps when underway or simply use them with a cable lock to safely store your toys when at the dock.
Magma A10-205 15 Inch Marine Kettle Gas Grill w/ Adjustable Control Valve, Steel
Dimensions (Overall): 15.5 inches (L), 6.5 inches (H) x 15.5 inches (W) x 15.5 inches (D)Weight: 9.2 poundsMaterial: Steel (Frame)Handle Material: PlasticLid Material: Stainless SteelCooking Grate Material: Stainless SteelAssembly Details: No Assembly RequiredModel #: A10-205Number of Burners: 1Grill surface area: 133 square inchesMaximum Heat Output: 75000 btuPower Source: PropaneBattery: No Battery UsedWarranty: 1 Year Limited Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 13-inch diameter gas grill is perfect for being out near or on the water & bull; Uses both radiant and convection cooking & bull; Windproof Swiveling Tubo Venturi Tube cuts down on blowouts & bull; Hinged lid doesn't slam shut and has a "stay cool" handle & bull; Indexed bowl and lid may be rotated to act as a windshieldYou don't have to stay on land to enjoy a good old fashioned barbecue, because with this Magma A10-205 15-Inch Marine Kettle Gas Grill, you'll have the perfect grilling platform for your boat too.
This particular marine grill uses both radiant and convection cooking with burner and high-tech radiant plate heat distribution, plus the windproof, swiveling Tubo Venturi tube eliminates blowouts. Handling the grill is easier thanks to the hinged lid that won't slam shut, and the handle has a "stay cool" design with air-cooled supports. Windy out the on the water? Use the indexed bowl and lid, rotating them to act as a windshield.
This boat BBQ grill also features a polished stainless steel design that stands up to water so you can enjoy it on your boat or at the beach. Just hook it up to gas cylinders and you'll be ready to go.
Magma Products Padded Grill & Accessory Carrying Case w/ Padded Shoulder Strap
Dimensions (Overall): 12.5 inches (H) x 17.2 inches (W)Weight: 5 poundsAssembly Details: No Assembly RequiredMaterial: Textile 1: PolyesterWarranty: 1 Year Limited Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Easily store and transport grill and grill accessories & bull; Thick padding offers optimal protection & bull; Main storage area fits grills 9 x 18 inches & bull; Includes additional storage compartments for accessories & bull; Reinforced carrying handles and heavy-duty zippersConveniently store and transport your grill and accessories in one of Magma's new luggage quality padded carrying cases. Designed to store all of your grilling gear in one space-saving location. This case is outfitted with a large storage compartment for a grill, pockets for storing a serving shelf, griddle, fish and veggie tray.
Includes an additional side pocket for carrying up to 2, 1-pound propane canisters and 2 control valve/ regulators. Additional features like thick padding for maximum protection and heavy-duty carrying handles and strap make this a must-have for every grilling enthusiast. With the same quality and craftsmanship, you've come to expect, once again Magma has just what you've been looking for.
Your grill accessories will be safe and secure thanks to the Grill Accessory Carrying Case from Magma.
Magma Products Marine Kettle Boat BBQ Barbecue Charcoal Grill, Original Size
Dimensions (Overall): 15 inches (L), 8.75 inches (H) x 15.5 inches (W) x 15 inches (D)Weight: 9 poundsMaterial: Stainless Steel (Frame)Handle Material: PlasticLid Material: Stainless SteelCooking Grate Material: Stainless SteelAssembly Details: No Assembly RequiredModel #: A10-104Grill surface area: 133 square inchesMaximum Heat Output: 75000 btuPower Source: CharcoalBattery: No Battery UsedWarranty: 1 Year Limited Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Hinged lid acts as windshield in gusty conditions & bull; Features adjustable height and rotating design & bull; Retains juices and flavor through oven type baking & bull; Cooks food faster & bull; Provides great temperature controlGrill your fresh caught fish while you're out on the water with the Magma Marine Kettle Charcoal Grill. As the original size, this grill has a 13-inch cooking grate and 15-inch total diameter.
This marine grill mounts onto your boat for cooking wherever the current takes you. To mount, you'll need to pick up the mounting hardware (not included).
The time-tested original charcoal “Marine Kettle” grill now has a hinged lid. The rotating lid design allows you to determine which direction you would like the lid to open when grilling in windy conditions. Grill your tasty morsels perfectly with this boat barbecue grill thanks to the variable temperature control.
The Marine Kettle's enclosed design allows oven-type baking to enhance the grill flavor while retaining the natural juices of the food. It will cook more food faster, on less grill area, than any other charcoal grill. Safety and efficiency are obtained by closing the draft door and extinguishing the coals for future use.
It is meticulously crafted of 100 percent 18-9 mirror polished stainless steel for maximum corrosion resistance.
Magma 10 Piece Scratch Resistant Stainless Steel Non Stick Nesting Cookware Set
& bull; Stainless steel base for use on induction cooking systems & bull; Nesting pots for easy and compact storage & bull; Tri-clad bottoms for great heat distribution & bull; Durable and scratch resistant & bull; Handles are easy to remove for storageMade of 18-10 mirror polished Stainless Steel, Magma’s 10-Piece Cookware Set is made with ceramica non-stick coating for use with Induction cooking systems. The set completely nests and can be stored in less than 0.5 cubic feet of cabinet space. The heavy-duty non-toxic, PFOA, and PTFE free, slate black, ceramica non-stick is remarkably easy to clean, will not stain, peel, blister, flake, and nothing sticks to it.
The encapsulated triple-clad bottoms are milled perfectly flat for perfect heat distribution. The triple-clad bottoms outer layer uses the highest quality ferromagnetic stainless steel, specifically used to activate the magnetic field in all Induction cooking surfaces. The set includes three saucepans, a lid that fits all three saucepans, a 5-quart stockpot, a sauté/ fry pan, a lid for the stockpot and sauté/ fry pan, 2 removable handles, and a bungee storage cord.
Magma Products A10-1293 Padded Grill Accessory Carrying Storage Case, Black
Dimensions (Overall): 15 inches (H) x 19.8 inches (W)Weight: 7.58 poundsAssembly Details: No Assembly RequiredMaterial: Textile 1: PolyesterWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Magma carrying case stores and transports grill accessories & bull; Includes large, padded storage space for a grill. & bull; For Grills with a 12x24 in. Primary Cooking Grate Size & bull; Inner pocket dimensions(L X W): 30 X 13 inches with a removable velcro insert that makes the available grill space 25 x 13 inches. & bull; Thick padding protects grill equipment from damageConveniently transport your grill and accessories in the Magma Products Padded Grill Accessory Carrying Storage Case. Whether you’re on the boat, at the campsite, or in the backyard, you’ll be able to grill anywhere with this convenient carrying case.
This grill bag is made to easily store all your grilling gear in one space-saving location and comes with a storage compartment for a grill, pockets to store a serving shelf, griddle, and a tray for veggies. You can even fit (2) 1-pound propane containers in the additional side pocket.
Not only can you fit everything you’ll need to grill on the go, this portable grill bag comes with thick padding and a comfortable set of carrying handles. This Padded Grill Accessory Carrying Storage Case from Magma Products is exactly what you’re looking for to take your love of grilling on the road.