DC 12V Delay Timer Repeat Cycle Time Relay 0-6s Adjust On/Off Control Machine
Note: The color of the item may vary slightly due to photography and your own computerSpecification:Model: ATDV-Y Contacts: 1 group cycle delay contactsVoltage: 12V DCInstallation method: panel installationTime Range: 0-6s(can set the time ON 1s,2s,3s,4s,5s,6s OFF 1s,2s,3s,4s,5s,6s)(set the on and off time with any groups , for example 1s on and 6s off )Working mode: cycle time delay, control of a machine to stop or cycle work, but also to simultaneously control two machines alternating cycle work.Weight: 154gPackage Included:1 x time Relay
3 Way Desk light Parts Touch Control Sensor lamp Switch Dimmer for Bulbs
Note: The color of the item may vary slightly due to photography and your own computerTouch lamp desk light 3 Way Sensor Switch Repair AC: 120V or 240V; 50Hz or 60Hz3 levels: low, medium, high, then offDimension: 4.8 x 3.2 x 1cmWeight: 10gSpecial Note: the energy saving lamps is not dimmable, and 3 Way Sensor Switch only applies to ordinary light bulbs (60W or less), not suited for energy-saving lamps and LED lights, pls make sure this point before purchase.Notes:If the Sensor lamp Switch can not work well,pls try the following steps:1. Whether you have connected the wire correct2. The power of lamp/bulb can not exceed 60W.3. after installing the touch device, dimming or opening lamp can not be allowed on power cord.4. The yellow line must be connect with conductor, such as metal,can not connect with plastic or wood.5. The 3-way switch only suitable for ordinary light bulbs ,not suitable for LED bulb or energy-saving lampsPackage include:1Pcs 3 Way Sensor Switch
1 Way On/off Desk light Parts Touch Control Sensor lamp Switch for Bulbs
Note: The color of the item may vary slightly due to photography and your own computer Touch lamp desk light 1 Way Sensor Switch Repair Lamp parts: Off-on 4-wire touch switch that (once installed) works by touching any metal on your table lamp (including the harp or saddle). Voltage: AC 220V Press-on, press again-off Dimension: approx. 4.5 x 3.5 x 1.5 cm Weight: 18g This is off/on only, can not adjust the brightness Suitable for ordinary light bulbs and energy-saving lamps Notes: If the Sensor lamp Switch can not work well, pls try the following steps: 1. Whether you have connected the wire correct 2. The power of lamp/bulb can not exceed 60W. 3. after installing the touch device, opening lamp can not be allowed on power cord. 4. The yellow line must be connect with conductor, such as metal, can not connect with plastic or wood. 5. The one way switch suitable for ordinary light bulbs and energy-saving lamps Package include: 1Pcs One Way Sensor Switch
5 x Pupil Distance Meter Optical Instrument PD Ruler 0-100mm Medical Measurement
Note: The color of the item may vary slightly due to photography and your own computer Feature: Measure pupil distance It is a very good promotional item and perfect for hospital, pharmaceutical or medical supplies. Measurement Range: 0-100mm Specification: Material: Plastic Color: White and Black Size: Approx. 21.2 x 5.6 cm/ 8.35 x 2.2"" (LxW) Weight: 49g Package Include: 5 x Plastic Pupil Distance Meter Rulers
RGB LED Controller Remote Control Touch Panel DC12V-24V Max 18A 3 channels
Note: The color of the item may vary slightly due to photography and your own computer Feature: Fashionable appearance and long service life Wireless Touch controller adopts the advanced capacitive touch technology Used for controlling a variety of lamp whose source of light is LED. For instance, point source of light, flexible light strip Brightness adjustable, static color choices and various dynamic changes in lighting effects through wireless touch remote control With Short circuit protection function and automatic recovery after short circuit protection function Automatic sleep function, when the touch remote control key state in no more than 20s, it can automatically enter standby mode to save power and prolong battery life Technical Parameters Working temperature: -30-60°C Supply voltage: DC12V~24V Output: 3 channels Output current:
105W Driver Power Supply Electronic Transformer for G4/G5.3 Halogen Light Bulb
100% Brand new , never used Item's color might be different from the picture because of the aberration.Feature:A halogen light electronic transformer is used for low voltage halogen blubs or lamp105 Watts Max Power Use for low voltage lighting , Change from AC 220V to 240V to AC 12V ONLY Use for AC low voltage lighting , Change from AC 220V or 240V to AC 12V (LED lights can not be used)ONLY For G4 or G5.3 Halogen Light Bulb Minimum to 20 WATT, Maximum to 105 WATTQuartz lamps for AC low voltage 12V (Halogen)Ta:40 degree To:85 degreeModel:AET105C-D The input line(red line) IN : AC 220 or 240V 50Hz or 60HzOutput lines(gray line and white line) OUT: AC 12VApplication:Decoration lighting for malls, family room lighting, Display scene,Artwork lighting,Landscape scene lighting can also be used for bar lightsSize:(approx) 9.5cm x 4cm x 2cm (L x W x H)Weight:72gPackage include:1 x Light Electronic Transformer
Ceiling light LED Power Driver Electronic Transformer AC85V-265V to DC9-14V 3X1W
Note: The color of the item may vary slightly due to photography and your own computer Suitable for ceiling, wall lights, spot lights, outdoor commercial lighting and other household Wide input voltage, high conversion efficiency With output open-circuit protection and short circuit protection LED Electronic Transformer Power Supply Driver adapter Power: 3W Input voltage: 85-265V/ 50-60Hz Output voltage: 9-14V Input and Output Cable length: approx. 8 cm Size: 39 x 25 x 21 mm (L x W x H) Weight: 16g Package Included: 1 x LED supply driver
60W SMD MR16 MR11 G4 Light Electronic Transformer Power Supply Driver
100% Brand new , never used Item's color might be different from the picture because of the aberration.Features:This LED Transformer is widely used for quartz lamp, G4 or MR16 or MR11 LED bulbs,low voltage lamp, Halogen Bulbs ,hanging lamp, etc(Only apply to indoor)With the highlights of Low temperature rise,No noise and no flicker performanceWith Over-current protection and short circuit protectionModel: AET60COutput Power: 20 to 60WInput: AC 220 to 240V 50 or 60HzOutput: AC 12VTc: 60degreeTa: 30degreePower factor:0.99Wire:RED:AC 220V input;WHITE:AC 12v output(NO positive and negative)Dimension: appreximately 65 x 36 x 20 mm (L x W x H)Weight:43gPackage included :1 x 60W Electronic Transformer
