Ikelite DL 8 Inch Dome Port
An 8" diameter dome made of optical grade acrylic. Comparable quality to glass yet significantly lighter and easier to handle, especially at the surface of the water. Not compatible with external filters. This port can be attached directly to housings featuring the Dry Lock (DL) port system or combined with DL extensions.
Ikelite 4501 Fiber Optic Coiled Cord
Features multi-core fiber optic cable for optimum signal transmission and built-in strain relief. Compatible with: Ikelite 4401 Fiber Optic Adapter Ikelite Manta Strobe Sea & Sea-type Fiber Optic Connections Olympus-type Fiber Optic Connections
Ikelite DLM 2.2 Inch Port Extension
Extends a Mirrorless Flat Port for use with longer lenses. Combine with the Mirrorless Flat Port Extended to use the Canon 100mm IS USM Macro lens with the Ikelite Housing for the Canon EOS 100D Rebel SL1 DSLR. Auto focus only.
Ikelite Underwater Housing Modular Glass Flat Front
When used underwater, flat ports bend light in such a way that the resulting image is magnified. This makes flat ports ideal for shooting small subjects with a standard, macro or zoom lens. The Modular Glass Flat Front features a durable, optical grade glass front element. Lens Extensions are available in a variety of lengths to accommodate most popular portrait and macro lenses. The Modular Glass Flat Front does not attach directly to a housing. A compatible Lens Extension is required. Each Lens Extension simply threads into the base of the Modular Glass Flat Front. A strap wrench is included for easy removal. Measure your lens or Use our Port Finder to determine compatibility and choose an appropriate Lens Extension. Note that if a port is long enough to accommodate the full length of a 1:1 macro lens, the lens may vignette at infinity when used behind a flat port. A flat port reduces the angle of coverage of a lens when used underwater. If you're shooting a wide angle or super-wide angle lens, we recommend using the Modular 8-inch Dome instead to preserve the full angle of coverage of the lens.
Ikelite Pistol Grip for GoPro Steady Tray #2601.11
Add an Ikelite pistol grip to your Steady Tray for GoPro for increased comfort and stability. It features durable ABS handle with soft-touch rubberized overmold. Slightly angled for improved ergonomics. It attaches with a single screw for easy removal when backing or in between dives.
Ikelite 2602.4 Steady Tray for GoPro Kit with Handles
Ikelite 2602.4 Steady Tray for GoPro Kit with Handles
Ikelite Underwater Housing for Panasonic Lumix TS7, FT7 #6172.07
A full featured and durable waterproof housing for Panasonic Lumix DC-TS7 and DC-FT7 digital cameras. Suitable for scuba, snorkel, surf, pool, and any application in or around the water.Advantages of the Panasonic TS7, FT7 Camera is waterproof to 102 ft (31m) and shockproof to 6.6 ft (2m) 20.4 megapixel BSI-CMOS sensor Optically stabilized 28-128mm equivalent f/3.3-5.9 lens Super-bright 3" LCD display 4K video at 24p or 30p plus high speed 120fps mode Built-in Wi-Fi CIPA battery life of 300 shots per chargeSuperb handlingFull camera control is essential underwater. Controls are provided for all camera functions and easy to operate even when wearing gloves. The shutter lever features a sensitive and natural feeling curved design. The standard control hugs the side of the housing for comfortable use when hand holding. It can be easily extended using the optional Shutter Trigger Extension # 4077.93 to put it within easy reach when using a right-hand quick release handle.Push buttons are made of acetal and hard anodized aluminum to reduce weight and prevent salt build-up for smooth operation with minimal maintenance. The back of the housing features laser engraved control symbols which will never fade or fall off.The camera mount is front-loading for easy installation and removal. A small mounting plate attaches to the bottom of the camera and secures in the front of the housing. The camera mounting plate does not need to be removed from the camera for surface use or when changing the battery or memory cards. The mounting plate features a 1/4-20 threaded mount on the bottom so that it can be attached to a tripod on the surface.FlashDue to the position of the camera's flash in relation to its lens, the built-in flash is not suitable to illuminate photos under water. For the best color and clarity, we recommend adding a filter, strobe, or constant-on light. The built-in flash may be used to trigger external strobes via fiber optic sync cord. Two ports are provided for the connection of up to two fiber optic cords.Wide angle, macro & filtersThe design of the camera's lens and flash prevents the effective use of external filters, wide angle lenses, or macro lenses.ConfidenceThe unique rear seal design prevents accidental twisting or stretching of the o-ring for simple and confident assembly. We have eliminated the need for an o-ring groove or channel which can trap sand, dirt, or debris. Two double-passivated stainless steel locking lid snaps are simple to use and virtually unbreakable. The clear back allows you to see the o-ring form a solid, watertight seal as it closes.Vacuum TestingA spare 1/2-20 threaded accessory port is provided on the side of the housing for easily installation of the optional Vacuum Kit # 47012. A vacuum kit allows you to draw a vacuum on the housing to check for leaks prior to entering the water. Drawing a vacuum on the system also provides extra security at the surface of the water, especially important when using the housing in rough surf.Durability and corrosion free performanceOur white ABS-PC blend housing provides strength and corrosion free performance year with minimal maintenance. The specially formulated color deflects the sun to keep your camera running cooler, longer. Compared to black or clear housings, the light color provides superior contrast for enhanced view of the camera, LCD screen, and o-ring seal.Made in USAIkelite products are designed, built and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit and function. Every unit is water pressure tested to 200 feet (60m). We back our products with over 50 years of experience and the best reputation for service within the dive industry.Compatibility
Ikelite 200' Underwater Housing for Sony Cameras (Updated Version), White
This updated version of the original housing includes the following new features: Ergonomic side-mounted shutter lever Improved self-centering zoom control Spare 1/2-20 accessory port for optional vacuum valve New white ABS-PC blend Controls for all camera functions except Flash switch and Viewfinder switch Slightly negative buoyancy in fresh water 1/4-20 thread tray mounting with 3" (76mm) spacing 3.0" diameter glass lens port Camera Compatibility Older RX100 Mark I and Mark II cameras are not usable in this housing due to differences in lens and control placement. Ergonomics A new slide-in, front loading camera mounting tray makes this housing a breeze to set up and shoot. Controls are provided for all important camera functions including a re-designed, spring loaded rear dial control. Rear push button controls are laser engraved for identification with a new bright red push button for the video record start/stop. A sensitive shutter lever makes it easy to half-depress the trigger for focusing and metering.Use the camera's built-in Wi-Fi feature to download photos to another device without removing the camera from the housing. The Wi-Fi feature is only usable above water within close proximity to the connected device. Construction There's no greater assurance than being able to see the o-ring seal. Simply close the two double-passivated stainless steel locking lid snaps and see the o-ring form a solid black, watertight seal. Ikelite products are designed, built and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit, function and waterproof integrity. We back our products with over 50 years of experience and service within the dive industry. Flash Due to the position of the camera's flash in relation to its lens, the built-in flash is not suitable to illuminate photos under water. For the best color and clarity, we recommend adding a filter, strobe or constant-on light. The built-in flash may be used to trigger external strobes via fiber optic sync cord. Two ports are provided for the connection of up to two fiber optic cords. Any Ikelite DS strobe may be connected using the Fiber Optic Converter and Fiber Optic Cord. The AF35 strobe is not compatible with this housing. Fiber optic cord compatibility Ikelite Fiber Optic Coiled Cord INON Optical D Cable "Non-wireless type" L-Connector SEA & SEA Fiber Optic Cable (L-type) SEA & SEA Fiber Optic Cable II Olympus UW Fiber Optic Cable PTCB-E02 Nauticam Optical Fiber Cable Nauticam to INON Nauticam Optical Fiber Cable Nauticam to Sea & Sea Wide Angle, Macro + Filters Our 3-inch diameter ports feature a 67mm thread on the front for the easy attachment of external wide angle and macro wet lenses. Wide angle lenses make objects appear smaller, so that you can fit more into your frame underwater. Macro close-up lenses make small objects appear larger, so that tiny creatures will fill your frame. The WD-3 Wide Angle Dome provides mid-range angle of view with no vignetting (dark shadows in the corners of the image).
Ikelite 200DL 200' Underwater Housing with Dry Lock Port Mount #71710
Featuring the new Dry Lock (DL) port system. Vacuum valve included. TTL circuitry sold separately. Lens port and zoom gear sold separately. Canon cameras are known for their great ergonomics. We extend this underwater, providing larger controls and push buttons which are easy to access even with thick gloves. Whenever possible, controls are located in the same configuration as on the camera to replicate the muscle memory and familiarity you've developed with your camera on the surface. Control symbols laser engraved into the back of the housing will never peel off or fade even with years of use. The camera's large, super-bright LCD screen is viewable edge-to-edge through the back of the housing. All important camera functions are accessible Controls are not provided for Diopter Adjustment Dial, Multi function lock switch, Flash button, Depth-of-field preview, AF area selection, LCD panel illumination button, AF operation selection button and Drive mode selection button, Metering mode selection button Ikelite bulkhead connector with manual flash hotshoe Optional TTL circuitry sold separately Near neutral buoyancy in fresh water Actual buoyancy varies depending on choice of lens and portThe front-loading camera mounting system makes installation and removal a breeze. The camera mounting plate allows ready access to the battery and memory card and features a standard 1/4-20 mounting point for attachment to a tripod topside. Lens Ports The single most important upgrade is our long awaited new Dry Lock (DL) port system. This exciting new system is even more robust and even easier to assembly than our time-tested Four Lock (FL) system. The new ports are lighter and more adaptable and can accommodate extremely large diameter lenses with ease. If you're considering shooting professional quality lenses like the Canon EF 16-35mm Type II/III or the Canon EF 11-24mm, then the DL system is essential.Most popular zoom lenses and select lens focus rings can be engaged using a simple yet effective gearing system that puts adjustment right at your fingertips. A large, soft-touch lobed knob on the side of the housing makes fine tuned adjustments a breeze. Zoom and focus gears differ depending on which lens you are using. All are lightweight and affordable. Zoom gears sold separately.Due to differences in mount diameter and zoom engagement, DL and FL system ports cannot be used interchangeably. The DL port mount may be removed and replaced with old style port locks for legacy users with standard or modular ports from our Four Lock system. This modification will prevent the use of newer DL ports. The housing cannot be converted back and forth repeatedly. Vacuum System The included vacuum valve allows you to vacuum test the housing to check for leaks prior to putting your expensive equipment in the water. Combined with a full view of the camera and o-ring seal through the back of the housing, there is no greater assurance that your gear will be safe. Our signature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel. Use of the vacuum valve requires a compatible Vacuum Pump with Gauge, sold separately. TTL Exposure This housings supports your choice of shooting all manual or adding TTL electronics depending on your application. Our new modular electronics system allows the housing to be updated with future strobe communications products as they become available. The flash bulkhead has been moved to the top of the case for improved cord routing and reduced strain. Reliable locking connectors between the hotshoe and bulkhead make it easy to install the optional TTL electronics or carry back up parts when traveling to remote locations.
Ikelite Canon 5D MK III IV 5DSLR Housing DL 50ft
Ikelite's newly designed DSLR housings provide the best value option for using your DSLR underwater. The Ikelite housing extends the impressive capabilities of the Canon 5D Mark IV underawater with easy-to-reach controls. Features newly designed DL port system with back plate that is depth rated 50ft! Port not included - sold separate.
The housing provides access to all important camera functions, using larger controls and push buttons which are easy to access even with thick gloves. Glass optical viewfinder enhanced for underwater, Visible o-ring seals, corrosion-proof solid body. This housing is designed, built, and tested in the USA. Ikelite's housings are handmade and individually inspected for fit, function and waterproof integrity. Maximize the potential of your gear by adding Ikelite's True TTL DS strobes, which work perfectly with the integrated TTL circuit in the housing. Non-Ikelite strobes can be used as well, on manual output only using a dedicated sync cord.
Ikelite 551016 Zoom Port Body, Lens upto 3.4in Flat
A popular Modular Lens Extension for use with many shorter length zoom lenses. The extension threads onto the base of either the Modular 8-inch Dome or the Modular Glass Flat Front for simple assembly and use in a wide variety of applications.
Accommodates lenses up to 3.5-inch (8.9 cm) long and 3.3-inch (8.4 cm) in diameter when used with the Modular 8-inch Dome. Accommodates lenses up to 3.4-inch (8.6 cm) long when used with the Modular Glass Flat Front. Measure your lens or use our Port Finder to determine compatibility.
Ikelite Underwater TTL Housing for Canon PowerShot G1X Mark II Digital Cameras
Ikelite Underwater TTL Housing for Canon PowerShot G1X Mark II Digital Cameras, 200' Depth Rating
Ikelite Underwater Action Housing for Sony Cyber-Shot RX100 or RX100 II Camera
Ikelite new line of Action Housings are designed with water sports and travel in mind: built tough yet compact and lightweight. And you don't have to stay near the surface of the water... each housing boasts a professional scuba and free diving depth rating of 200 feet (60m). Compact Action Housings are also perfect for the outdoor adventurer. A hard cased housing provides both protection and functionality way beyond the plastic bag alternative. And unlike a traditional dive housing, the compact Action Housing won't add excessive bulk to your backpack. Access to important camera functions including the menu and manual white balance. Functions are clearly engraved with the same symbols that are on the camera. Engraved markings will never fade or fall off The scratch-resistant glass lens port provides full use of the camera's zoom range without vignetting. The front of the port accepts press-on color correcting filters and is 67mm threaded for the attachment of optional accessories A custom ABS-PC blend housing with acetyl controls provides strength, UV protection and fundamentally corrosion-free performance A central 1/4-20 tripod mount on the bottom of the housing is the perfect attachment point for stabilizing trays and constant-on lighting Made in the USA and individually tested for fit, function and waterproof integrity Lighting If you're diving below about 60ft/18m or at night, they recommend adding a light to help your camera focus and boost the colors in your photos and video. In underwater lighting, brighter is better. Look for a light with a high lumens rating and a very wide, even beam. The camera's built in flash cannot be used inside of the housing. Wide angle, macro + filters Their 3-inch diameter ports feature a 67mm thread on the front for the easy attachment of external wide angle and macro wet lenses. Wide angle lenses make objects appear smaller, so that you can fit more into your frame underwater. Macro close-up lenses make small objects appear larger, so that tiny creatures will fill your frame. The WD-3 Wide Angle Dome provides mid-range angle of view with no vignetting (dark shadows in the corners of the image). The W-30 Wide Angle Lens, INON UWL-H100 and other 67mm threaded wide angle lenses, provide a wider maximum angle of view. Because these are separated from the camera's lens by glass, air and water, some vignetting and edge distortion will be present. These effects can be reduced or eliminated by using a smaller aperture, zooming in slightly, and/or cropping in post-production.
Ikelite Left Quick-Release Grip Handle for Steady Tray or Micro Trays #9531.3
The Ikelite Left Quick-Release Grip Handle for Steady Tray or Micro Trays allows for easy attachment and removal of arm components at the touch of a button for added convenience above and below water. Durable aluminum and ABS construction with soft-touch rubber over-molding for a comfortable grip for large or small hands. Placement of release handle does not interfere with opening and closing the housing. It is compatible with Steady Tray for GoPro and Micro Trays. Left-hand handle mounts on the left side when viewing the housing and tray from the back.
ikelite right-hand quick release handle with extension for modular tray base camera housing
The Ikelite Quick Release Handle allows for easy attachment and removal of arm components at the touch of a button for added convenience above and below water. The unique curved design and soft-touch rubber over-molding for a comfortable grip for large or small hands. Placement of release handle does not interfere with opening and closing the housing. This Quick Release Handle with Extension is designed specifically for use with modular tray bases as featured on select DSLR and Mirrorless camera housings. The Extension attaches to an existing Base with two included screws for stability and rotation-free use. The Extension is precision machined to reduce weight and hard coat anodized for durability.
Ikelite Underwater Housing for Olympus Tough TG-5/TG-6 Camera #6233.06
This robust, fully featured housing expands the capabilities of your Tough camera from the surf down to depths of 200 feet (60m). A side-mounted shutter lever and new zoom control make shooting a breeze. Hard anodized aluminum and acetyl controls operate smoothly and are fully serviceable for many years of enjoyment. Controls for all camera functions except Log Switch Slightly positive buoyancy in fresh water 1/4-20 thread tray mounting with 3-inch (76mm) spacingOur brand new ABS-PC blend provides strength and corrosion-free performance year after year. The specially formulated color deflects the sunlight to keep your camera running cooler, longer. Durable construction keeps the system watertight shallow and at depths up to 200ft (60m), well beyond the reach of the Olympus branded housing. Ikelite products are designed, built and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit, function and waterproof integrity. We back our products with over 50 years of experience and service within the dive industry. Camera Compatibility Older TG-series cameras are not usable in this housing due to differences in lens and control placement. Flash Due to the position of the camera's flash in relation to its lens, the built-in flash is not suitable to illuminate photos under water. For the best color and clarity, we recommend adding a filter, strobe or constant-on light. The built-in flash may be used to trigger external strobes via fiber optic sync cord. Two ports are provided for the connection of up to two fiber optic cords. Any Ikelite DS strobe may be connected using the Fiber Optic Converter # 4401.1 and Fiber Optic Cord # 4501. The AF35 strobe is not compatible with this housing. Fiber optic cord compatibility Ikelite Fiber Optic Coiled Cord # 4501 INON Optical D Cable "Non-wireless type" L-Connector SEA & SEA Fiber Optic Cable (L-type) # 50107 SEA & SEA Fiber Optic Cable II # 50128 Olympus UW Fiber Optic Cable PTCB-E02 Nauticam Optical Fiber Cable # 26211 Nauticam to INON Nauticam Optical Fiber Cable # 26212 Nauticam to Sea & Sea Wide Angle, Macro + Filters Our 3-inch diameter ports feature a 67mm thread on the front for the easy attachment of external wide angle and macro wet lenses. Wide angle lenses make objects appear smaller, so that you can fit more into your frame underwater. Macro close-up lenses make small objects appear larger, so that tiny creatures will fill your frame. The WD-3 Wide Angle Dome provides mid-range angle of view with no vignetting (dark shadows in the corners of the image).The W-30 Wide Angle Lens, INON UWL-H100 and other 67mm threaded wide angle lenses, provide a wider maximum angle of view. Because these are separated from the camera's lens by glass, air and water, some vignetting and edge distortion will be present. These effects can be reduced or eliminated by using a smaller aperture, zooming in slightly, and/or cropping in post-production. External macro lenses with 67mm threads from INON, Epoque and other manufacturers, can be attached directly to the front of the housing's port. 3-inch diameter color filters press directly onto these ports. Most wide angle lenses require a 3.6-inch diameter color filter. Refer to the product page for information on color filter compatibility.
Ikelite Bolt Nut and O-Ring Assembly for Lid Snap Closure of 5710 Housing Kit
The Ikelite Bolt Nut and O-Ring Assembly is specially designed for Lid Snap Closure of 5710 Housing Kit.
Ikelite Replacement Focus Clamp for All SLR, SLR-AF & SLR-AF MD Housings #9059.8
The Ikelite Replacement Focus Clamp is used to attach to a lens so gear sleeve 0073 could be used to zoom or manually focus the lens.
Ikelite Camera Control Gland with 5/16" Thread and O-Ring for 1/4" Shaft #9251
"Quad-Seal" Ikelite camera controls are famous for their dependability. Each gland allows rotation and in-out travel of a 1/4-inch shaft (not included). Threads directly into a 3/8-24 tapped hole or using a 3/8-inch through hole and 0219.2 nut (not included). Choose length based on thickness of housing and length and travel of control shaft. Shaft, knob and nut not included.
Nikon 18-135mm Underwater Camera Port Body Extension
Ikelite Nikon 18-135mm Port Body, Lenses up to 5.000" with Flat or 5.100" with Dome
