Buy Intelix Products online in United States

Intelix AVO-VGA Passive VGA balun w/2-Yr Warranty

Intelix AVO-VGA Passive VGA balun set passively transmits VGA video over standard unshielded twisted pair cable, such as Cat 5, Cat 5e or Cat 6. The AVO-VGA eliminates the need for costly and bulky VGA cable, and extends video transmission distances. Intelix AVO-VGA Passive VGA balun Features: One VGA to one RJ45 connectivity Transmits/receives one VGA video signal Up to 200 feet cable lengths on U/UTP category 5/5e/6 This is a complete kit, which includes a transmitter and receiver Bandwidth: DC to 60 MHz

Intelix FLX-64-BSTK 6x4 HDMI/HDBaseT Matrix Switcher w/2-Yr Warranty

Intelix FLX-64-BSTK 6x4 HDMI/HDBaseT Matrix Switcher was designed for use in conference rooms that have two in-room inputs extended to the rack, a few local sources at the rack, two discrete displays, a VTC codec, and a recorder. The FLX-64 features four HDMI inputs, of which two allow analog audio embedding on balanced inputs. Two HDBaseT inputs are also provided. The HDBaseT inputs support 1080p HDMI video with audio, wide-band IR tunneling (for IR control of sources), RS232 routing, and HDCP up to 60 meters (196 feet). Each HDBaseT input port supplies power to the attached extender, eliminating the need for a power supply at the source end. All inputs feature selectable HDCP compliance and advanced EDID handling to address challenging system design parameters. Intelix FLX-64-BSTK 6x4 HDMI/HDBaseT Matrix Switcher Features: 4 HDMI inputs (2 w/ audio embedding) and 2 HDBaseT inputs 4 HDBaseT Lite Outputs w/ PoE & 2 mirrored HDMI outputs 60 m (200 ft) maximum extender distance Audio de-embedding on each output, including breakaway Front panel, IR, TCP/IP, and RS232 control IR and RS232 routing IR and RS232 tunneling over HDBaseT (inputs and outputs) Control page and configuration accessible from web browser (Web GUI) Advanced HDCP management

Intelix INT-44HDX-BSTK 4x4 HDMI/HDBaseT Matrix Switcher w/2-Yr Warranty

Intelix INT-44HDX-BSTK 4x4 HDMI / HDBaseT Matrix Switcher is a four input by four output HDBaseT/HDMI matrix switcher with HDCP 2.2 and 4K/30 video support. The matrix features advanced EDID and HDCP handling, including the ability to turn input HDCP compliance ON and OFF to ensure maximum functionality with a wide range of sources. The INT-44HDX features HDBaseT twisted pair extension for each output, and simultaneous HDMI on the first two outputs, allowing the same signal to be routed to the HDMI connector and a remote destination with an HDBaseT receiver. The HDBaseT ports support up to 4K/30 HDMI video with audio, bidirectional wide-band IR, matrix control via IR, RS232 tunneling, and HDCP ( 1.4 and 2.2 ) up to 100 meters (328 feet). Each HDBaseT output port supplies power to the attached extender, eliminating the need for a power supply at the display end. Each output features analog stereo audio de-embedding and coaxial multichannel audio de-embedding for connection to amplifiers or DSPs. Intelix INT-44HDX-BSTK 4x4 HDMI / HDBaseT Matrix Switcher Features: Four HDMI inputs with HDCP 2.2 support Four HDBaseT with PoH, with two mirrored HDMI, outputs 100 m (328 ft) maximum extender distance Analog and digital audio de-embedding on each output Front panel, IR, TCP/IP, and RS232 control IR and RS232 routing IR and RS232 tunneling over HDBaseT Control page and configuration accessible from web browser Advanced HDCP management

Intelix DL-HD24A-H2 DigitaLinx 2x4 HDMI Distribution Amp / Splitter w/2-Yr Warranty

This Intelix DL-HD24A-H2 DigitaLinx 2x4 HDMI Distribution Amp / Splitter is an HDMI 2.0 compatible 2:4 auto scaling and auto switching HDMI distribution amp / splitter that features two HDMI inputs and four HDMI outputs. The splitters HDMI outputs can switch as a group to either input via auto or manual switching methods and supports down scaling so a 4K video input can automatically be down scaled to an 1080p output when connecting a display that only supports resolutions up to 1080p. The DL-HD24A-H2 supports 4K signals up to 4K@60Hz / 4:4:4 / 8 bit color and features an easy EDID management option using dip switches on the rear panel of the unit. Analog and digital audio can be de-embedded from the selected HDMI input and the DL-HD24A-H2 supports CEC control and is HDCP 2.2 compliant. The DL-HD24A-H2 can be controlled via front panel buttons, RS232 or by TCP/IP control. Intelix DL-HD24A-H2 DigitaLinx 2x4 HDMI Distribution Amp / Splitter Features: HDMI 2.0 18G HDMI switching distribution amplifier 2 switchable HDMI inputs and 4 HDMI outputs Front panel button, RS232, or TCP/IP control for input selection Supports 4K60 8-bit 4:4:4 color & HDR Analog and Digital audio de-embedding HDCP2.2 compliant Auto down scaling for maximum compatibility with mixed resolution displays

Intelix DIGI-HDXL-S-XSTK 150m HDBaseT HDMI, Ethernet Transmitter w/2-Yr Warranty

Intelix DIGI-HDXL-S-XSTK 150m HDBaseT HDMI, Ethernet, RS232 & Bi-Directional IR - Transmitter extends HDMI over a single cable by incorporating HDBaseT technology. The DIGI-HDXL-R supports 1080p video signals, including multichannel audio. Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations. Key features of the extender combine local HDMI output on the transmitter, power over Ethernet (PoE), bidirectional IR, bidirectional RS-232, and Ethernet pass-through with a 2-port network switch on the receiver. Intelix DIGI-HDXL-S-XSTK 150m HDBaseT HDMI, Ethernet, RS232 & Bi-Directional IR - Transmitter Features: HDMI transmission up to 150m (492 ft) HDMI loop out; locking power connector Supports 1080p/24bit and audio formats up to 7.1 audio Supports HDBaseT, CEC specifications; HDMI/HDCP compliant Built-in surge protection, diagnostic LEDs Bidirectional Wideband IR, RS232 and 100BaseT Ethernet PoE (Power over Ethernet) - power from RX (PS not included) when used with DIGI-HDXL-R

Intelix DIGI-HDXL-R-XSTK 150m HDBaseT HDMI, Ethernet Receiver w/2-Yr Warranty

Intelix DIGI-HDXL-R-XSTK 150m HDBaseT HDMI, Ethernet, RS232 & Bi-Directional IR - Receiver extends HDMI over a single cable by incorporating HDBaseT technology. The DIGI-HDXL-R supports 1080p video signals, including multichannel audio. Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations. Key features of the extender combine local HDMI output on the transmitter, power over Ethernet (PoE), bidirectional IR, bidirectional RS-232, and Ethernet pass-through with a 2-port network switch on the receiver. Intelix DIGI-HDXL-R-XSTK 150m HDBaseT HDMI, Ethernet, RS232 & Bi-Directional IR - Receiver Features: HDMI transmission up to 150m (492 ft) Two-port Ethernet switch; locking power connector Supports 1080p/24bit and audio formats up to 7.1 audio Supports HDBaseT, CEC specifications; HDMI/HDCP compliant Built-in surge protection, diagnostic LEDs Bidirectional Wideband IR, RS232 and 100BaseT Ethernet pass-through PoE (Power over Ethernet) - power from TX (PS not included) when used with DIGI-HDXL-S

Intelix DL-HD50C-WPKT-W DigitaLinx HDMI Wall Plate Extension Set w/2-Yr Warranty

This Intelix DL-HD50C-WPKT-W DigitaLinx HDMI Wall Plate Extension Set consists of an HDMI wall plate transmitter and a CAT receiver. The CAT output can extend 1080P signal up to 164ft / 50 meters via a single CAT6/6a cable. It supports Power Over Cable (POC) function that allows for greater flexibility in installations. Intelix DL-HD50C-WPKT-W DigitaLinx HDMI Wall Plate Extension Set Features: Transmitter in a Single Gang Wallplate, RX box format Uncompressed 1080P/60Hz up to 50 meters over Cat5e or above HDMI 1.3b and HDCP compliance Wall plate powered remotely by receiver

Intelix INT-USB2-50HWP USB2.0 High Speed Extender Host Side w/2-Yr Warranty

This Intelix INT-USB2-50HWP USB2.0 High Speed Extender Host Side offers you the flexibility of choosing between a wall plate and a traditional unit for either the Local or Remote side. Once paired, these will expand the computer & rsquo;s USB port to a two-port powered USB hub. These devices provide the ability to extend up to two USB 2.0 peripherals 50 meters away from the computer, way beyond the typical 5-meter limitation of only using one CAT6 cable. This means each peripheral connected to the Remote unit can receive a full 480 mA of power and can even power the peripherals without the host connection. Offering sleek commercial-grade housing, these high-grade USB extenders provide a simple and flexible solution for any application, including education, commercial, and medical. Connecting and extending various USB peripherals to your laptop or personal computer (such as web cameras, microphones, cable cards and disk drives) couldn & rsquo;t be any easier. Truly plug-and-play; no driver is required when using software platforms such as Zoom, Teams, YouTube, Facetime, and other messaging applications. Intelix INT-USB2-50HWP USB2.0 High Speed Extender Host Side Features: USB2.0 High Speed Extender to be paired with standard or wall plate client extender Supports USB2.0 High Speed up to 480Mbps Supports Isochronous data transfer Flexible power can be applied at host or client end Decora style wall plate ships with matching cover plate Pair with INT-USB2-50C or INT-USB2-50CWP

Intelix - INT-HD70-TX - HDMI Slim 70M, POH, IR and Control HDBaseT Extender - Transmitter ( priced per each. )

Features and Benefits Extends HDMI, IR, and RS232 over a single solid core shielded Category 5e or greater cable using the Valens VS010TX HDBaseT chip 1080p, including HDCP 2.2 and multichannel audio, up to 70m 3D and 4K x 2K (UHD) signals up to 40m Built-in surge protection and diagnostic LEDs Powered at either the TX or RX end, and only one power supply is required The power supply is included; IR accessories (DIGIB-EMT and DIGIB-EYE) are sold separately. Compatible with all Intelix HDBaseT product offerings and any product that meets the HDBaseT specifications. This listing is for each. Specifications: Input/Output Connections HDMI Input: HDMI Type A HDBaseT Port: 8P8C port (Shielded RJ45) Power: 5.5 mm OD, 2.6 mm ID Threaded Barrel RS232 Port: 3-pin Removable Terminal Block Connector IR Input: 3.5 mm TRS Receptacle IR Output: 3.5 mm TRS Receptacle Supported Audio, Video and Control Video Resolutions: SMPTE: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, UHD/30; VESA: Resolutions up to 1920x1200; Color Depth: 24, 30, 36, 48bit Maximum Video Compatibility at 70m: Deep Color 36/30/24 Bit at 1080p Maximum Video Compatibility at 40m: 1080p 3D, UHD/30, Deep Color 48 Bit at 1080p Video Compliance: HDMI 1.4 and HDCP 1.4/2.2 Embedded Audio: Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio ARC (Audio Return Channel): No HEC (HDMI Ethernet Channel): No CEC (Consumer Electronics Control): Yes (Pass-through Only) Supported Baud Rates: 2400, 4800, 9600, 19200, 38400, 57600, 115200 Supported IR Carrier Frequencies: 33 - 55kHz HDBaseT Signal Characteristics Maximum Distance: 229 ft Cable Requirements: Continuous shielded solid core CAT5e or greater with TIA/EIA-568B crimp pattern (no couplers in-line) Bandwidth: 10.2Gbps HDBaseT Chipset: VS010TX Power and Regulatory Power Input: 24V DC 1.25A or 48V DC PoH (Power over HDBaseT) Power Output: 48V DC PoH (Power over HDBaseT) Power over Ethernet (PoE) Compatibility: 802.3af Alternative A Power Consumption: 5 watts ESD Protection: 15kV air, 8kV contact Regulatory: FCC, CE, RoHS Chassis and Environmental Construction: Black Alumininum Dimensions (HxWxD): 0.64 x 4.73 x 3.31 Operating Temperature: 32°F - 104°F Operating Humidity: 20% - 90%, Non-condensing Storage Temperature: 14° - 140°F Storage Humidity: 20% - 90%, Non-condensing

Intelix DL-7USB-PHUB TeamUp+ 7 Port Powered USB 3.0 Commercial Hub w/2-Yr Warranty

This Intelix DL-7USB-PHUB DigitaLinx "TeamUp+" Series 7 Port Powered USB 3.0 Commercial Hub is a commercial grade, USB 3.0 SuperSpeed, 4 or 7 port powered USB hub designed to expand the capability of your computer all through a single cable. Interact with up to seven USB devices simultaneously while providing full USB 3.0 charging power (5v 900mA per port). Transfer data and power devices like web cameras, capture cards, tablets, thumb drives, smart boards, microphones, and other USB peripherals with ease. The powered USB hub can fully support data transfer rates from SuperSpeed, Hi-Speed, and Full-Speed USB connections and is fully backward compatible to all USB 2.0 and USB 1.1 hosts. Intelix DL-7USB-PHUB DigitaLinx "TeamUp+" Series 7 Port Powered USB 3.0 Commercial Hub Features: Expansion:KEY_TAB Instantly grow from 1 USB port to 7, each equipped with USB 3.0 technology, capable of data at speeds up to 5gbps. Connect various USB peripherals to your laptop or personal computer such as web cameras, microphones, cable cards and disk drives Commercial Design:KEY_TAB Eliminate cable clutter, metal chassis with vented slots for heat dissipation, provided brackets and screws allow you to mount behind a display or underneath a conference table Protection:KEY_TAB Overcurrent, overvoltage, and other advanced safety features allow you to maintain and protect your connected devices Compliance:KEY_TAB Gen USB 3.1 while being fully backways compatible for USB 3.0/ USB 2.0/ USB 1.1KEY_TAB Data Transfer Rate:KEY_TAB Up to 5Gbps shared between all ports Support on Upstream Port:KEY_TAB SuperSpeed (SS), HighSpeed (HS) and FullSpeed (FS) traffic. Note: Transfer rates are device and USB host controller dependent Support on Downstream Ports:KEY_TAB SuperSpeed (SS), HighSpeed (HS), FullSpeed (FS) and LowSpeed (LS) trafficKEY_TAB KEY_TAB Power Input:KEY_TAB Hub will not receive power from buc connection. Must use provided, external power supply Power Output:KEY_TAB Each USB port can receive up to 5v, 1A. Note - All connected USB downstream devices can still receive power even when the hub is not connected to a computer, external power supply needs to be connected. Blue LED lights will not be lite unless the hub is connected to the computer Charging Protocol:KEY_TAB Supports USB-IF Rev1.2 and BC 1.2 which means the current can output up to 1.5A instead of the standard 0.9A on USB 3.0 when connected to a PC.vices quickly! In addition, data transfer can also take place in accordance with USB 3.0 Dimensions:KEY_TAB 125.6mm/4.9 & rdquo; L x 70.8mm/2.7 & rdquo; W x *27.3mm/1 & rdquo; H) Package includes:KEY_TAB Powered hub, mounting brackets, USB 3.0 cable, User manual and external power supply Complete Plug and Play:KEY_TAB NO additional driver or software required to be recognized by the computer Options:KEY_TAB Also available in a 4 port option