ITW LINX ITW-M8KSU-60 SurgeGate 8 Outlet AC
ITW LINX ITW-M8KSU-60 SurgeGate 8 Outlet ACMPN:ITW-M8KSU-60UPC:790237001023ITW Linx SurgeGate 8 outlet AC protectionAC Protection for telecom systemsSurgeGate Plus circuitryExpandable protection using SurgeGate modulesProtects equipment against prolonged overvoltages by disconnecting the power to equipment, then automatically reconnecting it when the power has returnedto a safe level. This Protect-Disconnect-Reconnect feature acts as a gate to prevent unsafe voltages from damaging electronic equipment.8 AC outlets power with four switched outlets4 Diagnostic indicator lights8 Power cord with right angle plugEMI/RFI noise filtration: 50db (99.7%)Mounting brackets includedLifetimemanufacturers product warrantyManufacturers connected equipment warranty: up to $50,000SurgeGate Plus circuitryThermal fusingCatastrophic surge circuitOver/undervoltage voltage protectionOvervoltage voltage shutoff: 147V ±8VUndervoltage voltage shutoff: 87V ±8VSingle pulse energy dissipation: 1650 JoulesPeak impulse current: 52,000 ALine voltage: 120V (50/60Hz)UL 1449 rating: 330VProtection modes: L-N, L-G, N-GWhiteITWM8KSU60
itw linx 4-outlet ac surge protector itw-m4ksu
Premier Series 4-Outlet AC Surgegate Surge Protector- 4-outlet AC surge protector with SurgeGate Plus circuitry and modular mounting capabilities- LED Indicators: 4- Power Cord: 8 foot right angle - Number Outlets: 4 - Number Switched Outlets: 4- Mounting brackets included-Thermal Fusing- Catastrophic Surge Circuit- Over/Undervoltage Protection- Overvoltage Shutoff: 147V 8V- Undervoltage Shutoff: 87V 8V- Single Pulse Energy Dissipation: 1650 Joules- Peak Impulse Current: 52 000 A- EMI/RFI Noise Filtration: 50db (99.7%)- Line Voltage: 120V (50/60Hz)- Initial Clamping Level: 200V Peak 141 rms - UL 1449 Suppression Rating: L-N 400V L-G 400V N-G 400V - Maximum Current Rating: 15A (1800W) - Response Time: 1-5 Nanoseconds
ITW LINX ITW#ITWGRM0600 RacMax 2600 8 AC Outlets
ITW LINX ITW#ITWGRM0600 RacMax 2600 8 AC OutletsMPN:ITW#ITWGRM0600UPC:087253526655- ITW rack mountable power protection- 8 Protected AC power outlets- Protect or disconnect circuitry- Front panel circuit breaker- Power indication light- Single height rack mountable chassis- 10 Foot power cordITWGRM0600 MPN:ITW-GRM0600790237001221
Itw Linx ITW-RM-12MPVD Rack Mountable Modular Frame
FeaturesSingle-height rack mountable 1U chassisAccommodates up to 12 replaceable RM port modules
ITW LINX ITW-RM12-CAT6-75-POE MODULAR SURGE PROTECTOR
ITW LINX ITW-RM12-CAT6-75-POE MODULAR SURGE PROTECTORMPN:ITW-RM12-CAT6-75-POE Solid State Category 6 Wall Mount Protection Module Applications: PoE RJ45 In/Out Agency Approval: UL 497 and 497B Grounding Requirements: Field-installed solid copper wire (6AWG for Primary, 14AWG for Isolated Loop) Recommended Grounding Impedance:
itw linx itw-rm12-cat6-lan cat6 modular surge protector
Solid State Category 6 Wall Mount Protection Module Applications: T1, Telco, and analog lines RJ45 In/Out Agency Approval: UL 497 and 497B Grounding Requirements: Field-installed solid copper wire (6AWG for Primary, 14AWG for Isolated Loop) Recommended Grounding Impedance:
ITW Linx ITW-RM-6MPVD MODULAR FRAME 6 PORT WALL MOUNT
UL Listed for Primary (497) and Isolated Loop (497B) applicationsExceeds TIA/EIA Standards 568 and 758 for CAT 5e and CAT 6 (depending on module ordered) performanceSolid-state protection provides the fastest response to transient voltages(1-5 nanoseconds) by quickly diverting damaging surges to groundUse between buildings in a campus environment as a building entrance protector or in hostile industrial applications as an isolated loop protectorUp to 6 individual and replaceable port modulesRJ45 input to RJ45 outputSingle-height wall mountable chassis (1U) - Protectors sold separately dependant on applicationSuggested Applications Include: Security cameras, POE, Phone systems, Ethernet, & VOIP
ITW Linx ITW-CAT6-75 CAT6-75-POE RJ45 Surge Protector
Features
Solid-state protection for fastest response
Expandable system protection - surgegate modules can be attached to one another to expand system protection as your system growsSpecifications
Clamping Level: 75V
Wires Protected: 4-pairs
Termination Type: 110 Punchdown
Dimension: 4.25- H x 4.25- W x 1.5- D
itw-mco8-110
ITW Linx Towermax surgegate Provides protection for 8 central office lines using a combination of 110 punch down blocks and RJ-45 connector jacks
ITW Linx M4KSU TOWERMAX 4 KSU
AC protection for telecom systems * Add towerMax Modules for complete customized protection * 4 switched AC power outlets * Diagnostic indicator lights * Eight II AC power cord with right angle plug * EMI/RFI noise filtration * Mounting plates included
ITW Linx GUM8110 TOWERMAX CO/8x110
Protects up to eight lines using two 110 connectors on the input and two 110 connectors on the output UL Listed Secondary
ITW Linx CAT6-LAN UPS Power Prot
- Category 6 Solid-State Building Entrance Protector- Protects high-performance 4-pair Cat6 outside plant cables as well as Cat6 UTP cables for LAN/Data applications (16V). Using 110 punchdown in/out. - Recommended Grounding Impedance: Product Type: Surge Suppressor/Protector Product Type: Surge Suppressor/Protector Manufacturer Part Number: CAT6-LAN Limited Warranty: Lifetime Weight (Approximate): 6.72 oz Dataline Protection: Ethernet Dataline Protection: Ethernet Manufacturer: ITW Linx Product Model: CAT6-LAN Product Name: SurgeGate CAT6-LAN Surge Suppressor Product Line: SurgeGate Brand Name: ITW Linx Brand Name: ITW Linx Height: 4.3 Width: 4.3 Depth: 1.5 Product Family: SurgeGate
ITW LINX M8KSU-60 towerMAX 8 KSU SOQ6
Protects 8 AC Outlets * Peaking Impulse Current 53k Amps Exclusive Surge-Gate? Circuitry Protects Against Prolonged Over-Voltages by Disconnecting Power to Equipment then Auto Re-Connects it when Power has Returned to a Safe level. MADE IN U. S. A. * 1 Nanosecond Response Base Unit for Connection of Towermax Modules * Flexible Expansion with the Addition of any TOWERMAX Module Exceeds UL Standards * 1650 Joules * 15 Amp load * Catastrophic and Thermally Fused * UL 1449 330 Volt Rated Replaces GUM0600 PEC 8310-012 Lucent Comcode 407676691
New ITW Linx SurgeGate 4 Outlet AC M4KSU 790237001016
New ITW Linx Surge Gate 4 Outlet AC M4KSU 790237001016 condition: New Brand: ITW Linx Model: ITW-M4KSU Voltage: 120 V Cord Length: 8ft. Number of Outlets: 4 MPN: M4KSU
ITW LINX CAT6-75-POE-RJ45 1 GB CAT6-75 POE RJ45 PROTECTOR
ITW LINX CAT6-75-POE-RJ45 1 GB CAT6-75 POE RJ45 PROTECTOR Category 6 Solid State Building Entrance Protector Protects highperformance 4pair Cat6 outside plant cables as well as Cat6 UTP cables for voice or ISDN low voltage (digital, 75V) applications. Using 110 punchdown in/out. Recommended Grounding Impedance:
ITW Linx CAT6-LAN-RJ45 1 Gb rated, protects 4 pair CAT6 rated c
1 Gb rated, protects 4 pair CAT6 rated c
UltraLinx 66 Block 235V Clamp
- 66 Block Primary or Secondary 235V Surge Protector- UL Primary and Secondary listed with 350mA fuse for voice/fax/modem line (235V) - Dual Indicator Lights: Protection OK and Ground Connection OK - Solid-State Protection - Single Pair Protection: Protect only the lines requiring protection - Ideal for Retrofit Applications: Just remove the bridging clips from the block and replace them with the Protector add the ground connection and the pair is connected - Grounding Requirements: Field-installed solid copper wire - Recommended Grounding Impedance: < 0.5 Ohm - Fuse Rating: 350mA ( 1.6 Ohms) - Signal Perfect Circuitry - Clamping Level: 235V - Response Time: 1-5 Nanoseconds - Capacitance:
Surveillance - Accessories
ITW LINX CC-CAT5-235 CAT5e REPLACMENT CIRCUT CARD 4 ML25-CAT5-235 Q4
Protect 4 pair, CAT6 rated LAN 1Gb
ITWLinx SurgeGate CAT6-LAN Surge SuppressorDataline Protection: 110-punchdown EthernetHeight: 4.3Width: 4.3"Depth: 1.5"Weight (Approximate): 6.72 ozLimited Warranty: Lifetime"
Towermax CO8-110
Towermax CO8-110- Analog Station Set and Central Office Line Protector- Protects up to 16-wires (8-pairs) using 110 punchdown in/out.- Auto-Resetting Technology: PTC resistors open when a surge occurs, protecting your equipment, but unlike other fuses, the PTCs close again once the surge passes.- Expandable modular system- Applications: Analog and Central Office lines for PBX or KSU- Agency Approval: UL 497A (Secondary)- Grounding Requirements: Uses Electrical AC Ground- Recommended Grounding Impedance:
MODULAR SURGE PROTECTOR
MODULAR SURGE PROTECTOR- Solid State Category 6 Wall Mount Protection Module- Applications: T1, Telco, and analog lines - RJ45 In/Out - Agency Approval: UL 497 and 497B - Grounding Requirements: Field-installed solid copper wire (6AWG for Primary, 14AWG for Isolated Loop) - Recommended Grounding Impedance:
Rack Mountable Modular Frame
Rack Mountable Modular Frame- Single-height rack mountable 1U chassis - Accommodates up to 12 replaceable RM port modules
RacMax 2600 8 AC Outlets
RacMax 2600 8 AC Outlets - 8 Outlet Rack Mountable AC Surge Protector- 8-outlet, 15 amp rack-mountable AC surge protector with protect or disconnect circuitry. Fits standard 19" racks/cabinets. - LED Indicator: Yes - Grounding Requirements: Electrical AC Ground - Recommended Grounding Impendance:
1 GB CAT6-75 POE RJ45 PROTECTOR
1 GB CAT6-75 POE RJ45 PROTECTOR- Category 6 Solid-State Building Entrance Protector- Protects high-performance 4-pair Cat6 outside plant cables as well as Cat6 UTP cables for voice or ISDN low voltage (digital, 75V) applications. Using 110 punchdown in/out. - Recommended Grounding Impedance:
SurgeGate 8 Outlet AC
ITW Linx SurgeGate 8 outlet AC protection AC Protection for telecom systems SurgeGate Plus circuitry Expandable protection using SurgeGate modules Protects equipment against prolonged overvoltages by disconnecting the power to equipment, then automatically reconnecting it when the power has returnedto a safe level. This Protect-Disconnect-Reconnect feature acts as a gate to prevent unsafe voltages from damaging electronic equipment.
Protect 4 pair, CAT6 rated LAN
Protect 4 pair, CAT6 rated LAN- Category 6 Solid-State Building Entrance Protector- Protects high-performance 4-pair Cat6 outside plant cables as well as Cat6 UTP cables for LAN/Data applications (16V). Using 110 punchdown in/out.- Recommended Grounding Impedance:
UltraLinx 66 Block 39V Clamp 350mA Fuse
UltraLinx 66 Block 39V Clamp 350mA Fuse- 66 Block Primary or Secondary 39V Surge Protector- UL Primary and Secondary listed with 350mA fuse for voice/fax/modem line (39V) - Dual Indicator Lights: Protection OK and Ground Connection OK - Solid-State Protection - Single Pair Protection: Protect only the lines requiring protection - Ideal for Retrofit Applications: Just remove the bridging clips from the block and replace them with the Protector, add the ground connection, and the pair is connected - Grounding Requirements: Field-installed solid copper wire - Recommended Grounding Impedance:
SurgeGate 8 Outlet AC
SurgeGate 8 Outlet AC - Premier Series 8-Outlet AC Surgegate Surge Protector- 8-outlet AC surge protector, with SurgeGate Plus circuitry and modular mounting capabilities- LED Indicators: 4- Power Cord: 8 foot, right angle - Number Outlets: 8 - Number Switched Outlets: 8- Mounting brackets included-Thermal Fusing- Catastrophic Surge Circuit- Over/Undervoltage Protection- Overvoltage Shutoff: 147V ±11V- Undervoltage Shutoff: 87V ±8V- Single Pulse Energy Dissipation: 1650 Joules- Peak Impulse Current: 52,000 A- EMI/RFI Noise Filtration: 50db (99.7%)- Line Voltage: 120V (50/60Hz)- Initial Clamping Level: 200V Peak, 141 rms - UL 1449 Suppression Rating: L-N 400V, L-G 400V, N-G 400V - Maximum Current Rating: 15A (1800W) - Response Time: 1-5 Nanoseconds
UltraLinx 66 Block 25 Pair Ground Bar
UltraLinx 66 Block 25 Pair Ground Bar- Multiple Ground Bar and Screw Ground Lug for 66 Block Protectors - Required for use with UltraLinx Protectors (UP3 models) to provide the necessary ground connection from each protected pair to the single point equipment ground. One required per installation of 1-25 protected pairs. - 66 wiring block not included
