JK Audio THAT-2 Telephone Handset Audio Tap #THAT2
Connect the JK Audio THAT-2 between your telephone and handset for quick access to audio in and out of the telephone. The JK Audio THAT-2 is used by radio stations to record and play sound bytes and by TV and film sound crews to get IFB dialog over phone lines. The THAT-2 is a passive handset interface which has professional and consumer jacks, separate input and output volume control, a selector switch for different types of telephone systems and still does not need any batteries or AC. Simply unplug the handset coily cord form the base of your telephone and plug it directly into the THAT-2. Then, using the supplied cable, connect the THAT-2 back to the telephone. It connects your audio equipment or powered speaker to the RCA or XLR jacks. The Gray pushbutton selects which audio will be sent into the telephone (OUT = talking on the handset, IN = sending audio in through the RCA jack). The output jacks contain a nice mix of the audio from both sides of the conversation, as well as the tones being pressed on the keypad. It has a three-position switch which accommodates electret, dynamic and carbon telephone handset microphone types. The THAT-2 will emulate the type of microphone that is in the handset and allow you to send audio into many different types of analog and digital PBX sets, as well as ISDN telephones. The THAT-2 does not work with cordless or cell phones or any telephone with a keypad in the handset.
JK Audio THAT-1 Telephone Handset Audio Tap #THAT1
Connect the JK Audio THAT-1 between your telephone and handset for quick access to audio in and out of the telephone. The THAT-1 is used by radio stations to record and play sound bytes and by computer and telephone companies to demonstrate their computer voice services using a powered speaker. Simply unplug the handset coily cord from the base of your telephone and plug it directly into the THAT-1. Then, using the supplied cable, connect the THAT-1 back to the telephone. Now connect your audio equipment or powered speaker using the RCA jacks. The Gray pushbutton selects which audio will be sent into the telephone (OUT = talking on the handset, IN = sending audio in through the RCA jack). The output RCA jack contains a nice mix of the audio from both sides of the conversation, as well as the tones being pressed on the keypad. The volume control adjusts the volume of the signal going to your powered speaker or tape recorder. The THAT-1 will work with many different types of analog and digital PBX and ISDN telephones. The receive side of the THAT-1 (audio From Phone), will work on any telephone. To send audio into the telephone (To Phone), the telephone must have an electret type microphone in the handset. If your telephone has a round mouthpiece or if you intend to use this product on many different telephones, you should consider model THAT-2 which is compatible with a variety of telephone systems. It does not work with cordless or cell phones or any telephone with a keypad in the handset.
Jk Audio ComPack Universal Telephone Audio Interface #COMP
The Jk Audio ComPack Universal Telephone Audio Interface that connects to cell phones, PBX phone systems and standard analog phone lines. Perfect for remote broadcasts, IFB feeds or interviews over any telephone connection. Simply plug your audio equipment into ComPack and connect to a phone line. Then put on your headphones, plug in a microphone and you are ready to broadcast the game or talk up a taped interview. The balanced XLR line output jack provides a high quality connection to mixers and professional tape gear. ComPack also functions as a simple telecom interface for your beltpack intercom system. This no-frills feature allows you to connect the 3 pin XLR to your beltpack intercom group to provide a full duplex, always-on connection to any telephone network. Analog Phones Plug ComPack into an RJ-11 jack, go off-hook and dial or answer an incoming call. PBX Systems: Unplug the handset from any analog or digital PBX phone and plug the coily cord into ComPack. You can now send and receive audio through the PBX telephone set. Cell Phones Simply plug ComPack into the 2.5 mm headset jack of your wireless cell phone. Your phone will recognize ComPack as a headset, allowing you to send and receive audio through the phone.The ComPack cell phone interface was designed to take advantage of the increasing number of wireless phones that accept third party headsets and earpiece headsets. ComPack also functions as a simple telecom interface for your beltpack intercom system. This no-frills feature allows you to connect the 3 pin male XLR to your beltpack intercom group. This provides a full duplex, always-on connection to any telephone network.
Jk Audio Daptor Three Bluetooth Wireless Audio Interface #DAP3
The Jk Audio Daptor Three Bluetooth Wireless Audio Interface is connects to your cell phone like any other Bluetooth Wireless Technology enabled headset. Simply press and hold the recessed button on Daptor Three to initiate pairing mode. It will first attempt to connect in hands free mode to a cell phone. If this type of connection is not available, it will connect to any other product, such as a laptop, that allows a Bluetooth wireless connection. This wireless headphone mode offers a full audio bandwidth stereo connection.
JK Audio TAP-1 Telephone Audio and Power Interface #TAP1
The JK Audio TAP-1 is a phone line simulator for simple audio applications, that powers an analog telephone with the required -48 volts DC and separates audio into transmit and receive audio paths. The TAP-1 acts like an RJ-11 wall jack in your home. You may not know it but the telephone company sends power down into your wall jack and you use it to power your phone. This power is sent over the two wires call Tip and Ring. These two wires form a balanced, two way voice path which can be sent miles with minimal noise and signal loss. This two wire interface can be a burden if you just want to get audio in and out of a telephone without connection to the telephone company. The TAP-1 provides the Tip / Ring interface and -48 volt supply and then separates audio into transmit and receive. This is called a 2-wire to 4-wire hybrid. The bottom line... TAP-1 can be used on TV or film studio sets where a telephone or cordless telephone is used on set and you want to get audio into and out of the telephone. You can also use TAP-1 to test telephones, voice coding algorithms or phone line equipment. TAP-1 is built to very high specs for laboratory testing use.
JK Audio Voice Path Telephone Handset Audio Tap #VOICE
JK Audio Voice Path Telephone Handset Audio Tap for Phone Conversation Recording to Computer Sound Cards, 1/8" ( 3.5 mm) TRS Cable Input and Output
JK Audio BlueDriver-M3 Wireless Audio Interface #BDRV-M3
The BlueDriver-M3 from JK Audio is a wireless audio interface that uses Bluetooth 2.0 wireless technology to send audio from your Bluetooth-enabled cell phone to your professional equipment. The BlueDriver can be connected to the mic input of your mixer, allowing you to patch or record phone calls, ideal for on-air applications. A simple switch lets you choose phone or headset mode. The BlueDriver has a male XLR connector for connecting to your mixer. A 3.5mm jack can accept a signal from the mixer's headphone output in order to transmit back to your cell phone or headset. The BlueDriver has an internal rechargeable Li-ion battery that operates for up to 10 hours and recharges via a USB connection. Connects to the mic input of a mixing console via standard XLR connection Bluetooth 2.0 wireless technology provides a wireless range of up to 33' Switch between phone and headset modes 3.5mm jack can accept a signal from the mixer's headphone output in order to transmit back to your cell phone or headset Internal rechargeable Li-ion battery operates for up to 10 hours and recharges via a USB connection
Jk Audio Daptor Two Wireless Phone Audio Interface #DAP2
The Jk Audio Daptor Two Wireless Phone Audio Interface is simply plug Daptor Two into the 2.5 mm headset jack of any wireless cell phone that accepts a third party headset or earpiece. You can now send and receive audio from your mixer or tape recorder through the cell phone. Your cell phone will recognize Daptor Two as a headset which will disable the mic and speaker in the cell phone. Since Daptor Two replaces the headset, you will need to provide a microphone and microphone preamplifier and a headphone amplifier and headphones to allow conversation to continue.
JK Audio BlueDriver-F3 Bluetooth Wireless Audio Interface #BDRV-F3
JK Audio BlueDriver series audio interfaces use Bluetooth Wireless Technology to send and receive audio from your professional audio equipment. BlueDriver now features HD Voice technology, allowing 7 kHz Wide Band Speech when used with compatible phones on compatible networks. BlueDriver-F3 plugs directly into a dynamic mic or the mic level output from a mixing console. Pair to your Bluetooth enabled cell phone or headset. The 3.5 mm stereo headphone output jack allows monitoring of the return audio or video playback audio over headphones or an IFB earpiece.A switch on either unit selects between connection to a 3rd party Bluetooth headset or a cell phone. HD Voice (Wide-Band Speech) Compatible BlueDriver-F3 = 3 pin female XLR HD Voice (Wide-Band Speech) 3-pin Female XLR Input 3.5 mm mic level output Trim Pot Adjusts Mic Level Headset/Phone Switch Mini USB Power Jack >6 hours on Internal Li-Ion Battery Made in USA Headset Connect Pair BlueDriver to your 3rd party Bluetooth headset. Some Bluetooth headsets allow you to switch between your audio device and a cell phone. Phone Connect Pair BlueDriver to your cell phone to call into the station or bring in caller audio.
JK Audio RemoteAmp Two Stereo Headphone Amplifier #RAMP2
The JK Audio RemoteAmp Two combines professional audio electronics in a rugged new belt pack design. It provides a listen only connection for mono IFB or full bandwidth stereo music listening. Separate volume controls for the XLR and 3.5 mm line input jacks allow a simple mix of mono and stereo sources. The XLR line level input accepts either a balanced mono signal or a party line intercom feed (listen-only). The 1/2 watt, 1/4" stereo headphone jack will cut through any crowd noise. Connect an IFB earpiece to the 3.5 mm earpiece jack for mono operation.
Jk Audio Broadcast Host Analog Desktop Digital Hybrid #HOST
The Jk Audio Broadcast Host Analog Desktop Digital Hybrid turns your desktop into a professional broadcast center. Contains everything you need to get talk show quality phone recordings into your mixer or sound card. It connects a mic and headphones for a simple broadcast back to the station. Use Broadcast Host in your newsroom to record high quality interviews. Or, you can upload your recorded interview to your podcast. Broadcast Host allows you to send mic and line level signals into the phone line while maintaining excellent separation between your voice and the caller. The stereo output jack on the back of the unit provides your voice on one channel and only the caller's voice on the other channel. The balanced XLR output jack contains only the caller's voice. The Jk Audio Broadcast Host Analog Desktop Digital Hybrid connects audio signals to a standard analog telephone line without the transmit / receive crosstalk common to analog hybrids. The Digital Signal Processor (DSP) continuously monitors both the phone line and audio signals to deliver excellent separation. This proprietary, dual-convergence echo canceller algorithm can achieve excellent separation, typically exceeding 50 dB, without any setup and without sending a noise burst down the line. It provides connections for a microphone, headphones, mixer, sound card, telephone and your analog telephone line. An auxiliary telephone is only required to place outgoing calls. The auxiliary telephone is disconnected when you press the "Call" button and reconnected when you press the "Drop" button. It features Auto-Answer/Auto Disconnect for use in IFB and monitoring applications. Other applications include telephone interviews, talk shows, church PA interface and conference room full duplex applications.
Jk Audio Innkeeper PBX Digital Hybrid Multi-Line Telephone Interface #INNPBX
JK Audio Innkeeper PBX Digital Hybrid Multi-Line Telephone Interface, XLR and 3.5mm Mini Input Connectors, 200Hz-3600Hz Telephone Side Frequency Response
JK Audio RIU-IP Remote IP Interface for Innkeeper 1x/2/4 Digital Hybrids #RIUIP
JK Audio RIU-IP Remote IP Interface for Innkeeper 1x/2/4 Digital Hybrids
Jk Audio QuickTap Telephone Handset Audio Interface #QT
JK Audio QuickTap Telephone Handset Audio Interface, Mono 1/8" (3.5mm) Mini Output, 600 Ohms Impedance
JK Audio CellTap 4C Wireless Phone Audio Tap #CELLTAP4C
CellTap 4C, interview-recording adapter connects between the headset and cell phone, providing stereo output to a recorder or mixer. CellTap 4C is compatible with most smart phones, tablets and notebooks that use the 3.5 mm 4-conductor TRRS headset jack. Simply connect CellTap 4C between your existing ear-bud headset and phone and then connect the stereo output to a mic level input on your recorder or mixer. The transformer coupled stereo output provides the local mic on the left channel and the caller on the right channel. Local audio is a full bandwidth connection, meaning your voice will sound considerably better than the caller. Of course, audio quality is limited by the quality and placement of the microphone on the ear-bud style headset. CellTap 4C will not interfere with headset button controls on most devices. A headset is required for operation, as the phone will not recognize CellTap 4C without a headset connected. Internal switch supports both Sleeve = Ground / R2 = Mic and Sleeve = Mic / R2 = Ground wiring standards. The word standard is used loosely, since there are no actual standards for headset wiring or control operation. Therefore, they cannot promise compatibility with every phone. WARNING - There are many laws that prohibit the recording of telephone conversations without prior consent from both parties. Be sure to check the laws in your area.
HK AUDIO Cover For E210 SUB
Dimensions (Overall): 24.0 inches (L), 4.75 inches (H) x 19.75 inches (W)Weight: 1.99 poundsClosure Type: ZipperBag Structure: HardsideCompatible With: Speaker StandsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, Subwoofers are rarely handled with exacting care, so this cover provides twice the padding to protect active and passive subs especially effectively against damage in transit.
HK AUDIO ELEMENTS Soft Bag
Dimensions (Overall): 37.5 inches (L), 5.5 inches (H) x 9.75 inches (W)Weight: 4.49 poundsClosure Type: ZipperBag Structure: HardsideCompatible With: Speaker StandsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, This padded bag accommodates any combination of four E 435s and/or EA 600s or up to two E 835s. can also easily tuck a speaker pole in the bag. It is equipped with internal strapping to hold gear secure inside the bag, as well and carry straps that marry together in a comfortable handle. The best speaker bags for HK audio gear.
