Lehle Little Lehle III
Lehle Little Lehle III condition: New Brand: LehleMPN: does not applyType: Equalizer
Lehle Little Lehle III Effects Loop Switcher
Dimensions (Overall): 6.0 inches (L), 2.25 inches (H) x 5.5 inches (W) x 6.0 inches (D)Weight: .99 poundsEffect Type: Multiple EffectsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; True Bypass effects looper and AB switch & bull; Hum-free and noiseless switching & bull; Three different operating modes: Latching, Momentary or Mixed Mode & bull; Mono and stereo functionality & bull; Active pop suppression circuitThe Little Lehle III allows to add or remove effects pedals from signal path at the press of a button.
A signal can be picked off at any point in the signal chain, for example allowing to switch to an instrument tuner. The Little Lehle III can also be used to switch between two instruments with one amp or, vice versa, between two amps with one instrument. Extremely diverse sound sources are no problem. Signals from pickups, microphones and keyboard line-out sockets are routed loss-free to a cartnear amplifier or recorder. All jack sockets are stereo, so can re-route balanced signals too.
With the release of the Little Lehle III can now combine mono and stereo signals. This will allow to integrate an effects pedal with a mono input and stereo output into the signal path of the Little Lehle III without limitations. The Lehle-Switch works with a microcontroller and an intelligent true bypass relay circuit with an active pop suppression function, thereby allowing the Little Lehle III to switch even faster than mechanical switches, noise free and without wear.
The easy-action mushroom-shaped button characteristic of Lehle products is mounted in the cover so that foot pressure is transmitted indirectly via a spring. Thus the circuit board is not exposed to mechanical loads, making the Little Lehle III virtually indestructible and guaranteeing years of trouble-free switching.
Not only is the stereo signal switched, but also the earth, - so say ‘goodbye’ to hum when switching between two amps, and selecting effect loops - it just can't happen anymore.
New for the Little Lehle III are the three operating modes, making the switch work as either a latching or momentary switch, allowing for short or rhythmic stutter-effects. The third mode combines a mixture of operating mode one and two: a short hit engages the latching function and a long hit is momentary.
Lehle Little Lehle True Bypass Effects Loop Switcher Guitar Pedal
Dimensions (Overall): 6.1 inches (L), 2.2 inches (H) x 5.4 inches (W) x 6.1 inches (D)Weight: 1.0 poundsEffect Type: Multiple EffectsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Gold-plated switches & bull; No hum loops & bull; StereoThe Little Lehle is a genuine True-Bypass Looper / Switcher pedal. It can be used to manage an effect-loop or as a simple A/B box. Two instruments can be optionally routed to one amplifier input, or one instrument switched back and forth between two amplifiers. The gold-plated-contact switcher contained in the unit switches with maximum signal fidelity. The separate switching level for the ground contacts makes ground loops impossible. The Little Lehle offers full stereo functionality, with all jacks and internal switching contacts executed in stereo. 1 - Input signal - The input signal enters via this socket. Like all the jacks on the Little Lehle, the jack is of stereo type. The Little Lehle thus switches stereo signals (such as stereo effects or keyboards) and symmetrical signals (like those from microphones, for instance) and, of course, simple mono signals, like that of an electric guitar. The LED (6) shows green when the signal is present on the output (4) together with the ground (earth) connection. Press the trigger (7) and the stereo signal and ground connection are routed to the S jack (2). The LED (6) will now show red. Switching of the ground connections eliminates the possibility of hum loops. 2 - Send - The "S" stands for "Send". Depending on the mode selected, this jack is either connected to the input or inputs of one or more effect units, to a second amplifier or, for example, to a tuner. 3 - Return - "R" stands for "Return". This jack can be used for connection to the output of the effect unit(s) or, for example, can also be used for connection of a second instrument. It has no function if the Little Lehle pedal is used as an A/B box for operation with two amplifiers. 4 - Output - The output signal is routed out of the Little Lehle via this socket. The LED (6) shows green when the input signal together with the ground connection is directly present here. Pressing the trigger (7) routes the R(eturn) jack signal (3) together with the ground connection to the output jack. 5 - Power supply - The Little Lehle guitar pedal requires an 8 to 20V power supply for operation of the LEDs. Polarity is of no importance. The supply voltage is internally rectified and stabilized in order to guarantee trouble-free operation. A thermal cut-out automatically trips and switches the unit off if a short-circuit occurs. A correctly fitting plug connector for the power-supply socket is supplied with the Little Lehle. This can be soldered to the required power unit if necessary. 6 - LEDs behind a magnifying lens - The high-intensity LEDs, which are located under a light guide system with an optical lens, clearly indicate the current switching state - even under bright spotlights. 7 - Indestructible switching mechanism - Two parallel slide switches with gold-plated contacts, which switch the stereo signal together with the ground connections, are actuated inside the switcher by means of a practically indestructible switching mechanism. The slide switches switch virtually silently, since they function completely bounce-free. 8 - Solid box / easy to fix - The base of the Little Lehle pedal can be secured without difficulty. First remove the four housing screws for the cover, and then screw the base of the switch to a base-plate using the two Screws supplied with the unit, the washers and the spacer elements.
Lehle MIDI Junction
Dimensions (Overall): 4.25 inches (L), 1.4 inches (H) x 1.5 inches (W) x 4.25 inches (D)Weight: .4 poundsEffect Type: Multiple EffectsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, The (LEE-La) Lehle MIDI Junction networks up to four Lehle SGoS (Second Generation of Switching) Switchers via standard stereo jack-plug adapters, using MIDI program-change commands for communication between the individual Switchers. External MIDI equipment that responds to MIDI program-change commands can also be connected by means of a five-pole DIN socket.Combination of multiple MIDI Junction units permits networking of up to ten Lehle SGoS Switchers.The Lehle MIDI Junction in its virtually indestructible housing of 1.5 mm thick steel sheet is an entirely passive accessory, with no need for a power supply.
Lehle DC Filter
Dimensions (Overall): 2.75 inches (L), 1.3 inches (H) x 1.5 inches (W) x 2.75 inches (D)Weight: .34 poundsEffect Type: Multiple EffectsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, The Lehle DC Filter eliminates DC voltage from analog signals. Audio signals containing DC voltage cause ugly switching noise. Now, both line and high-impedance signals are cleaned — but with no loss of sound. The DC Filter is of full stereo type, and thus filters stereo — and, of course, mono — signals. This little aid can even process balanced signals. The Lehle DC Filter is a passive filter, so it needs no power supply.
Lehle Stereo Volume Pedal
Lehle Stereo Volume Pedal condition: New Brand: LehleMPN: does not applyType: Volume
Lehle Dual Expression Pedal
Dimensions (Overall): 8.6 inches (L), 2.1 inches (H) x 4.0 inches (W) x 8.6 inches (D)Weight: 1.84 poundsEffect Type: Volume and ExpressionWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Lehle Dual Expression pedal Expression Pedal with 2 outputs & bull; Controls all common devices with expression inputs & bull; Magnetic sensor technology, without mechanical wear & bull; Precise control from digital potentiometers & bull; MIDI via USBExpress self, twice. The LEHLE DUAL EXPRESSION is an active, wear-free expression pedal equipped with a precise magnetic sensor. Known from the LEHLE VOLUME pedals, this sensor uses the Hall effect, named after Edwin Hall, to measure the strength of magnetic fields.In the LEHLE DUAL EXPRESSION the Hall sensor is accurately calibrated to the built-in magnet and the control range of the pedal – where the pedal moves only the magnet, whose distance is measured by the Hall sensor.Two digital potentiometers, working with analogue voltages, are used for the precise and reliable generation of the expression data.This technology allows distinctly more accurate operation than is offered by conventional expression pedals with mechanical potentiometers. There is no mechanical wear, avoiding the need for maintenance or complicated adjustments. Both outputs can control nearly all common devices with expression inputs from 5k to 100k, regardless if TS, TRS or RTS – the polarity can be switched and stored using the soft-push buttons.Alternatively, the 10k output can be set to work as a latching or momentary switch, if the pedal is pushed in fully toe position. Then e.g. the channel of an amp can be changed or, connected to a switch-input of a digital device, any desired function can be controlled.Via the USB socket can send MIDI data to a computer, in order to control midi compatible software.In use, the LEHLE DUAL EXPRESSION is extremely smooth and steady under foot, as it is equipped with low-friction bearings of a high-performance polymer. By means of an adjusting screw the mobility of the pedal can be modified with great precision.Compared to the LEHLE MONO VOLUME we were able to reduce the weight by 50% and the size by 35% – with the same rugged stability. It’s even 2 cm flatter, however the pedal range stays the same - just as comfortable and responsive as the larger models.Light, small, and twice the precise expression: LEHLE DUAL EXPRESSION.
Lehle Dual SGoS Programmable Switcher
Dimensions (Overall): 8.0 inches (L), 2.3 inches (H) x 6.0 inches (W) x 8.0 inches (D)Weight: 1.8 poundsEffect Type: Multiple EffectsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Gold-plated relays & switches & bull; MIDI send & receive & bull; Lehle LTHZ transformer & bull; No hum Loops & bull; Adjustable gainThe (LEE-La) Lehle Dual SGoS is the second evolutionary stage of the highly successful programmable switcher for two amps plus tuner. This unit makes it possible to play through two amplifiers individually or simultaneously, either as a stand-alone unit or in a network with other Lehle SGoS switchers. A particularly popular combination is the Lehle Dual SGoS with the Lehle D.Loop SGoS. Programming is as easy and intuitive as would expect from a Lehle product, and can also be done remotely, using MIDI program change commands.Hum loops are completely excluded, thanks to electrical isolation of outputs A and B by the Lehle LTHZ high-end transformer. Gold-plated-contact relays, ground switches and phase inverters assure the full, loss-free guitar sound. The potentiometers are in the signal path when output A and B are active simultaneously, and the volume of the two amps can be balanced – producing a third sound 've never heard before! Output T, basically intended for instrument tuners, can also be used for a third amp or for a second channel for amp B, opening up even more potentials.The gold-plated-contact relays feature active pop-and-click suppression, outputs A and B can be muted for undisturbed instrument tuning. Welcome to the new duality.
Lehle Stereo Volume Pedal - Active
Dimensions (Overall): 11.0 inches (L), 2.75 inches (H) x 4.25 inches (W) x 11.0 inches (D)Weight: 3.64 poundsEffect Type: Volume and ExpressionWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, The (LEE-La) Lehle Stereo Volume pedal is equipped with a precise magnetic (Hall) sensor, enabling it to operate almost wear-free. This sensor uses the Hall effect, named after Edwin Hall, to measure the strength of magnetic fields. In the Lehle Stereo Volume, the Hall sensor, which is made in Germany, is accurately calibrated to the built-in magnet and the control range of the pedal. The pedal moves only the magnet, the distance is measured by the Hall sensor which controls a VCA.
A premium Blackmer Stereo-VCA (Voltage Controlled Amplifier) from the United States replaces here in this case the mechanical potentiometer. The principle of the voltage-controlled amplifier is based on the fact that gain can be varied by the control voltage coming from the Hall sensor. This technique allows to operate more precisely than conventional mechanical potentiometers or optical sensors used by the standard volume pedals. In addition the potentiometer-typical noise and the complicated adjustment are eliminated.
Over the entire control range the Lehle Stereo Volume transmits the full sound spectrum of the connected instrument. The input and output impedance always stay the same, ensuring that there will be no damping of higher frequencies as with potentiometers.
Internally, the input voltage coming from the power supply socket of the pedal is rectified, then filtered, stabilized and doubled to 18V, thus achieving a total dynamic range of 110 dB.
The volume control of the Lehle Stereo Volume ranges from -92 dB to 0 dB - so from a virtually muted level to the same volume.
The Lehle Stereo Volume runs mechanically extremely smooth and steady, as it is equipped with low-friction bearings of a high-performance polymer, and there is no mechanical transmission of the pedal to other components. By means of an adjusting screw the mobility of the pedal can be modified very precisely.
The Lehle Stereo Volume can both distribute one signal to two outputs and add up two input signals to one output: If only a mono signal is supplied, the signal can be split and sent to two different output channels using the split-function. An input stereo or a dual-mono-signal can be merged to mono via the summing function. The balanced (TRS) as well as unbalanced (TS) outputs make the Lehle Stereo Volume fit for use in studios or FOH-environment, e.g. to control the amount of real-time effects or signal busses.
Lehle Mono Volume Pedal - Active
Dimensions (Overall): 11.0 inches (L), 2.75 inches (H) x 4.25 inches (W) x 11.0 inches (D)Weight: 3.67 poundsEffect Type: Volume and ExpressionWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, The (LEE-La) Lehle Mono Volume Pedal is equipped with a precise magnetic sensor enabling it to operate almost wear-free. This sensor uses the Hall effect, named after Edwin Hall, to measure the strength of magnetic fields. In the Lehle Mono Volume the Hall sensor, which is made in Germany, is accurately calibrated to the built-in magnet and the control range of the pedal. The pedal moves only the magnet, with the distance measured by the Hall sensor which controls a VCA.A premium Blackmer VCA (Voltage Controlled Amplifier) from the United States replaces here in this case the mechanical potentiometer. The principle of the voltage-controlled amplifier is based on the fact that gain can be varied by the control voltage coming from the Hall sensor. This technique allows to operate more precisely than conventional mechanical potentiometers or optical sensors used by the standard volume pedals. In addition, the potentiometer-typical noise and the complicated adjustment are eliminated.Over the entire control range, the Lehle Mono Volume transmits the full-sound spectrum of the connected instrument. The input and output impedance always stay the same, ensuring that there will be no damping of higher frequencies as with potentiometers.Internally, the input voltage coming from the power supply socket of the pedal is rectified, then filtered, stabilized and doubled to 18V, achieving a total dynamic range of 110 dB.The volume control of the Lehle Mono Volume ranges from -92dB to 0dB – from a virtually muted level to the same volume. With a potentiometer, a gain up to +10 dB boost can be additionally adjusted.Mechanically, the Lehle Mono Volume runs extremely smooth and steady, as it is equipped with low-friction bearings of a high-performance polymer, and there is no mechanical transmission of the pedal to other components. An adjusting screw makes modifying the mobility of the pedal very precise. Furthermore, the Lehle Mono Volume has a buffered direct out which can supply a tuner, DAW or a second amp without affecting the sound.
Lehle P-Split III Signal Splitter
Dimensions (Overall): 6.0 inches (L), 2.25 inches (H) x 5.5 inches (W) x 6.0 inches (D)Weight: 1.06 poundsEffect Type: Multiple EffectsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Top of enclosure: orange & bull; Bottom of enclosure: gris foncé 59 & bull; All colors by Le Corbusier's color keyboards & bull; Passive splitter and DI box & bull; Absolutely no signal loss or humThe Lehle P-Split III combines passive splitting with the highest possible signal fidelity.Its applications range from splitting signals and eliminating hum, to balancing and re-amplification along with any signal routing that requires a clean signal free from noise.At its core is the high-end Lehle Transformer HZ, which galvanically isolates the two outputs, eliminating any possibility of ground loops. The Lehle Transformer HZ was specially designed for use with high-impedance signals but also splits low-impedance signals with uncompromising sound quality. The signal can be picked off either symmetrically or asymmetrically from the ISO output.By using the phase inverter switch with gold-plated contacts can flip the signal phase at the ISO output, preventing phase cancellation from impairing signal reproduction.The classic application for the Lehle P-Split III is splitting an input signal to two outputs, enabling to connect an instrument to two devices, which may, for example, be two amplifiers, or an amp and a mixer/recording unit (PC/DAW). Thanks to its ability to pick off the balanced signal on the ISO output, the Lehle P-Split III is also eminently suitable for use as a high-quality compact DI box for all types of signal.Another useful application for the Lehle P-Split III is as a hum suppressor. Frequently background noise caused by ground loops occurs when two electronic devices are connected to each other. The Lehle P-Split III provides a simple, but extremely effective remedy when installed between the two units. Using the ISO output, the devices are galvanically isolated and background noise becomes a thing of the past. can even use the versatile Lehle P-Split III as a passive mono summing unit for a stereo signal by using the DIR output as second input.And just in case are looking for a power connection: the Lehle P-Split III performs all its functions without any need for a power supply.
Lehle Little Dual II ABY Switcher
Dimensions (Overall): 6.0 inches (L), 2.25 inches (H) x 5.5 inches (W) x 6.0 inches (D)Weight: 1.41 poundsEffect Type: Multiple EffectsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; ABY switcher (A or B or both) & bull; Hum- and noise-free switching & bull; High-impedance Lehle Transformer HZ with phase and ground switch & bull; Two different operating modes & bull; Stereo-routing optionThe Lehle Little Dual II is the successor to the Lehle Little Dual and is a maximum signal-fidelity amp switcher for two amps. By using the soft-touch switches can switch between two connected amplifiers hum-free and without sound loss.Two different operating modes are ready for . decide if want to activate or deactivate every output individually or if want to switch between the amps and activate the remaining one.The Lehle-Switches work with a microcontroller and an intelligent True-Bypass-Relay-Circuit with active pop noise suppression circuit. Thereby they switch the Lehle Little Dual II even faster than mechanical switches and in addition to that wear- and noise-free.The easy-action mushroom-shaped buttons characteristic of Lehle products are mounted in the cover, so that foot pressure is transmitted indirectly only, via a spring. Thus the electronics board is not exposed to mechanical loads, making the Lehle Little Dual II virtually indestructible and guaranteeing years of trouble-free switching.High-intensity LEDs make it easy to read off switching state A or B, or both, even under high-power spots.The centerpiece of the Lehle Little Dual II is its high-end Lehle Transformer HZ, which galvanically isolates output A from output B, making history of hum loops - permanently! The Lehle Little Dual II features a gold-plated contact phase inverter and a gold-plated contact ground switch. The two inputs can also be routed in stereo to outputs A and B, if use the stereo signal of an effects unit as the input, for example. This also makes it possible to route instruments equipped with two pickups, including many acoustic and hybrid guitars, and also double basses, via two amplifier systems - with no complications.Additionally the Lehle Little Dual II is equipped with a TRS switch. Therewith it is possible to send in above-mentioned stereo- or dual-mono signals via a TRS jack or “stereo-jack”.These signals can be operated either in alternation or in parallel - without hum, and without sound losses, needless to say. The Lehle Little Dual II - small, but so utterly effective!
NEW! Lehle JULIAN Line Driver With Parametric Midboost
NEW! Lehle JULIAN Line Driver With Parametric Midboost condition: New Brand: LehleMPN: Does Not Apply
Lehle Mono Volume 90 for Pedal Steel Guitar
Dimensions (Overall): 11.0 inches (L), 2.75 inches (H) x 4.25 inches (W) x 11.0 inches (D)Weight: 3.68 poundsEffect Type: Volume and ExpressionWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, The (LEE-La) Lehle Mono Volume 90 Pedal for pedal steel guitar is equipped with a precise magnetic sensor enabling it to operate almost wear-free. This sensor uses the Hall effect, named after Edwin Hall, to measure the strength of magnetic fields. In the Lehle Mono Volume 90, the Hall sensor, which is made in Germany, is accurately calibrated to the built-in magnet and the control range of the pedal. The pedal moves only the magnet, the distance is measured by the Hall sensor which controls a VCA.
A premium Blackmer VCA (Voltage Controlled Amplifier) from the United States replaces the mechanical potentiometer. The principle of the voltage-controlled amplifier is based on the fact that gain can be varied by the control voltage coming from the Hall sensor. This technique allows to operate more precisely than conventional mechanical potentiometers or optical sensors used by the standard volume pedals. In addition, the typical noise of a potentiometer and the complicated adjustment are eliminated.
Over the entire control range, the Lehle Mono Volume 90 transmits the full sound spectrum of the connected instrument. The input and output impedance always stay the same, ensuring that there will be no damping of higher frequencies as with potentiometers.
Internally, the input voltage coming from the power supply socket of the pedal is rectified, then filtered, stabilized and doubled to 18V, thus achieving a total dynamic range of 110dB.
The volume control of the Lehle Mono Volume 90 ranges from -92dB to 0dB – so from a virtually muted level to the same volume. Using the MIN control, the minimum volume of the Lehle Mono Volume 90 can be set within a range from mute 0% to 90% (-10dB). Furthermore, a gain up to +12dB boost can be additionally adjusted via the GAIN control.
The Lehle Mono Volume 90 runs mechanically extremely smooth and steady, as it is equipped with low-friction bearings of a high-performance polymer, and there is no mechanical transmission of the pedal to other components. By means of an adjusting screw, the mobility of the pedal can be modified very precisely.
In addition, the Lehle Mono Volume 90 has a buffered direct out which can supply a tuner, DAW or a second amp without affecting the sound.
In and output jacks on the side of the pedal make the Lehle Mono Volume 90 an ideal device for pedal steel players — without any obstruction, the pedal can be placed in the usual spot on the pedal steel rack.
Lehle Sunday Driver II Preamp, Buffer and Boost
Dimensions (Overall): 6.0 inches (L), 2.25 inches (H) x 5.5 inches (W) x 6.0 inches (D)Weight: .95 poundsEffect Type: Multiple EffectsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; High-end preamp, buffer and booster & bull; Discrete Class-A input stage & bull; 130 dB dynamic range thanks to 30 V technology & bull; Select between Buffer and Booster modes & bull; Neutral, studio quality soundThe Lehle Sunday Driver II is a high-end preamp and DI box all in a conveniently compact format.
Its circuit is based on a discrete Class A circuit with JFET technology and provides two modes of operation, selected by a mode selector switch with gold-plated contacts: "D" stands for Driver: in this mode, guitar signal is amplified, with absolutely no modification, at the input impedance of a guitar amp, efficiently eliminating losses on the route through leads and effects; the signal remains strong and clear, retaining its full dynamics.
The second setting "S" — as in Sunday — multiplies the input impedance by five, bringing out previously inaudible details and, as gain increases, giving guitar a characteristic and unmistakable warmth that has given this preamp its name - the result is a sound as mellow as a sunny Sunday afternoon.
Even at the maximum +18 dB gain setting, the Lehle Sunday Driver II always stays clean and absolutely free of background noise, thanks to its studio-standard overall dynamic range of 130 dB. To exploit the dynamics of tube amplifiers to the full, the input voltage is also rectified from the power supply socket, then filtered, stabilized and transformed to 30 V.
can use it as a DI box on stage or as a high-end preamp in the studio as well: the output of the Lehle Sunday Driver II can be tapped in balanced and the pedal be powered via phantom power.
Whether as a cable driver for stadium gigs, in complex effects setups, or as a recording preamp — with its broad output range of 20 to 100,000 Hz, the Lehle Sunday Driver II can be used anywhere. And not just on Sundays.
NEW! Lehle 3at1 SGOS 3@1 Stereo Switcher
NEW! Lehle 3at1 SGOS 3@1 Stereo Switcher condition: New Brand: LehleMPN: Does Not Apply
Lehle P-Split II Passive High Impedance Splitter
The P-split makes it possible to route an instrument to two amplifiers simultaneously with no noise or hum. The patented LHTZ high-end transformer is specially designed to cleanly split both low and high impedance signals, making the P-plit a perfect passive DI box as well.
Lehle Julian Preamp, Buffer and Booster With Parametic Mids and Treble
Dimensions (Overall): 6.0 inches (L), 2.2 inches (H) x 5.4 inches (W) x 6.0 inches (D)Weight: 1.3 poundsEffect Type: Distortion, Fuzz, and OverdriveWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; HZLZ switch lets select input impedance & bull; TSTB selector switch allows to select the bypass mode want & bull; Multiple LEDs to display r switching state & bull; Gain, Frequency, Boost and Treble controlsThe (LEE-LA) Lehle Julian is an advanced Lehle Sunday Driver SW and offers additional controls like the parametric mids and treble. It has developed into a versatile booster - especially with the vintage users in mind – to adjust the input of a tube amp. The parametric midboost allows individual sound shaping as well as recreating the characteristics of familiar classics like the established Dallas Rangemaster or the Hornby Skewes Treble Booster, supplying the ear with familiar sounds. Since these boosters had a very low input impedance we have equipped the Lehle Julian with a switch that reduces the impedance from 1 MOhm to 10 kOhm for authentic rendition of their characteristics. The treble control completes the sonic performance. And the best: all settings from "muffled" to "edgy" are always audio friendly, there is no dull or piercing sound. The overdrive grade of the connected amp can be fine-tuned with the gain pot by +/- 15 dB ranging from super clean to distorted. The Lehle Julian always delivers a clean output thanks to its JFET input stage. Its personal dynamic derives from the fact that the incoming current is rectified, stabilized and doubled to 18V right after the powersocket. In OFF status, the Lehle Julian provides two different modes of operation - in TB (= True Bypass) mode, the input and output are linked with zero losses to one another via a switch with gold-plated contacts. True Bypass mode is the best option for a small set-up with short cable routings and when a classical fuzz pedal is looped in after the Lehle Julian. The line-driver function, located at the start of the train or in an effect chain, is the better solution for long cables and for complex effect board configurations. Running the Lehle Julian in TS mode (= True Sound) it becomes active as a buffer, but without amplifying or coloring the signal. The Bypass mode option enables the Lehle Julian to integrate ideally into any set-up, whether as a battery-operated stand-alone unit, or in an existing pedal board.
Lehle Parallel L Line Mixer w/ True Bypass Switch
The Parallel L allows you to mix the signals from effect units into the original signal, either before the amp or inserted into its effects loop. Send and return levels can be adjusted separately, and level relative to the original signal optimally selected using the mix controller.
Lehle Sunday Driver SW II Preamp, Buffer and Boost with Switch
Dimensions (Overall): 6.0 inches (L), 2.1 inches (H) x 5.5 inches (W) x 6.0 inches (D)Weight: .99 poundsEffect Type: Multiple EffectsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; High-end preamp, buffer and booster & bull; Discrete Class A input stage & bull; 130 dB dynamic range thanks to 30 V technology & bull; Choose between two sound modes & bull; Neutral, studio quality soundThe Lehle Sunday Driver SW II is a compact high-end preamp for all types of electric and acoustic instruments — a preamp for electric and acoustic guitars and basses, not to mention other stringed instruments (such as violins, cellos and double basses) to realize their full musical potential. The switchable version expands on the classic Lehle Sunday Driver II with a soft-touch foot switch, to activate and deactivate the pedal.The Lehle-Switch works with a micro-controller and an intelligent True-Bypass-Relay-Circuit with active pop suppression circuit, thereby allowing the Lehle Sunday Driver SW II to switch even faster than mechanical switches, noise-free and without wear.The easy-action mushroom-shaped button characteristic of Lehle products is mounted in the cover, so that foot pressure is transmitted indirectly, via a spring. Thus the electronics board is not exposed to mechanical loads, making the Lehle Sunday Driver SW II virtually indestructible and guaranteeing years of trouble-free switching.When ON, its circuit is based on a discrete Class A circuit with JFET technology and provides two modes of operation, selected by a mode selector switch with gold-plated contacts: "D" stands for Driver: in this mode, guitar signal is amplified, with absolutely no modification, at the input impedance of a guitar amp, efficiently eliminating losses on the route through leads and effects; the signal remains strong and clear, retaining its full dynamics. The second setting "S" — as in Sunday —multiplies the input impedance by five, bringing out previously inaudible details and, as gain increases, giving guitar a characteristic and unmistakable warmth that has given this preamp its name — the result is a sound as mellow as a sunny Sunday afternoon.Even at the maximum +18 dB gain setting, the Lehle Sunday Driver II always stays clean and absolutely free of background noise, thanks to its studio-standard overall dynamic range of 130 dB. To exploit the dynamics of tube amplifiers to the full, the input voltage is also rectified from the power supply socket, then filtered, stabilized and transformed to 30 V.When OFF, the Lehle Sunday Driver SW II provides two different modes of operation: in TB (True Bypass) mode, the input and output are linked via relay, with zero tonal loss. True-Bypass mode is the best option if have a small setup with short cable routings and for when a treble booster or old-school fuzz pedal is placed after the Lehle Sunday Driver SW II.If have long cables or a complex effects board configuration, switch to TS (True Sound) mode, and the Lehle Sunday Driver SW II is active as a buffer, without amplifying or modifying the signal in any way. In this mode, the Lehle Sunday Driver SW II operates as a totally neutral line-driver equivalent to mode D with the gain pot turned all the way to the left. The Bypass mode option enables to effortlessly and tone-fully integrate the Lehle Sunday Driver SW II into any setup, no matter how complex.
Lehle Parallel SW II True-Bypass mono/stereo FX line mixer
Dimensions (Overall): 6.1 inches (L), 2.25 inches (H) x 5.4 inches (W) x 6.1 inches (D)Weight: 1.3 poundsEffect Type: Multiple EffectsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Latching, Momentary or Mixed Mode operation & bull; Mono and Stereo functionalityThe LEHLE PARALLEL SW II is a compact and versatile line mixer designed to meet the highest tonal standards. The LEHLE PARALLEL SW II mixes the signals from effects units into original signal, either before an amp or inserted into its effects loop. can adjust send and return levels separately, and finely balance the effects signal to the original signal using the mix controller. All connections are realized in stereo, so stereo effects pedals can be placed into the signal path of the LEHLE PARALLEL SW II Thanks to the discrete Class A input stages with JFET technology, the LEHLE PARALLEL SW II's inputs can handle high-impedance signals - from electric guitars, basses or acoustic instruments - as well as low-impedance signals - from keyboards, active electric guitars and basses - with a broad output range extending from 20 to 100,000 Hz. With the new LEHLE PARALLEL SW II it is now possible to combine mono and stereo signals. can easily integrate effects pedals with mono input and stereo output into the signal path of the LEHLE PARALLEL SW II without limitations. The great dynamic range of the LEHLE PARALLEL SW II makes it possible to blend rack-mount studio effects units with low-impedance line level into the guitar signal path, or insert effects pedals with their level-adjusted into an amp's effects loop. To exploit the dynamics of tube amplifiers to the full, the input voltage is rectified from the power supply socket, then filtered, stabilized and transformed to 30 V. The LEHLE-Switch works with a microcontroller and an intelligent True-Bypass-Relay-Circuit with active pop suppression circuit, thereby allowing the LEHLE PARALLEL SW II to switch even faster than mechanical switches, noise-free and without wear. The easy-action mushroom-shaped button characteristic of LEHLE products is mounted in the cover, so that foot pressure is transmitted indirectly, via a spring. Thus the electronics board is not exposed to mechanical loads, making the LEHLE PARALLEL SW II virtually indestructible and guaranteeing years of trouble-free switching. The LEHLE PARALLEL SW II has three operating modes, making the switch work as either a latching or momentary switch, allowing for short or rhythmic stutter-effects. The third mode combines a mixture of operating mode one and two: a short hit is latching; a long hit is momentary. Placing no limitations on creativity, we take care of signal so that can take care of the music.
