CFAST to SATA Adapter
The Adapter is designed to enable the latest high performance CFast media to be used as a direct replacement for SATA hard drive.
Description :
The SATA III to CFast card Adapter is designed to provide an interface between the SATA III and the CFast 24-pin SATA Bus Form Factor Interface standard. Works with DOS, Windows 95, 98, XP, 2000, Win 7, Linux, Unix, allowing the operating system to boot and run from a CFast card.
The adapter connects to the Host PC in the same way that a 2.5 SFF SSD drive is connected using a SATA cable. It
CFast cards are electrically compatible with SATA-IO compliant products, but have CompactFlash specified connectors and shape.
Micro SATA Cables PN # CFAST-ADPT
Mini PCI-E Card to USB 2.0 Adapter Card
-Mini PCI-E Card to USB 2.0 Adapter Card Description This is a mini PCI-e card to USB 2.0 adapter. The adapter is for a mini PCI-e slot to USB 2.0 device interface. It is very suitable for any small size USB device needed to be plugged into a laptop. Supports both full and half size Mini Card slots are -supported by removing extra full-size extensions. Features Both Full and Half size of MiniCard Slots are supported by removing extra Full-size extensions. NOTE : USB2.0 Bus connection regardless of USB3.0 connector. Item # PCI-E-USB2.0-BRKT
M.2 (NGFF) nVME SSD to 18pin WiFi Port
-? M. 2 (NGFF) nVME SSD to 18pin Wifi port
SAS 29 Pin Female to SAS 29 Pin Male High Temp Extension Cable - 2 Meter
?This is a High Temp Cable for Test Applicatins
It is a SAS 29 Pin Female to SAS 29 Pin Male Extension Cable
The cable is - 2 Meters in Lenght
Micro SATA Cables PN # SAS-MF-EXT-2M
This USB 2.0 10 Pin Male to Female Internal Motherboard Extension Cable is 16 Inches in length
USB 2.0 10 Pin Male to Female Internal Motherboard Extension Cable - 16 Inches Description USB 2.0 Internal Cable 1 Male and 1 Female Connector 10 Pin Connectors are polarized Color: Black Cable Length: approx. 16 Inches 2.54 mm Pitch For use with PC's for an internal motherboard USB 2.0 cable USB 2.0 Speed up to 480 MB/S Micro SATA Cables PN # USB-INT-10P-EXT
USB 3.0 to USB 2.0 Internal Cable - 12"
USB 2.0 9 Pin Female to Motherboard USB 3.0 20 Pin Male Cable Adapter. Lets your USB 3.0 20 pin device connect to a USB 2.0 motherboard.
Details
Data speed: 480Mbps for USB 3.0 device.
Length: 12 Inches.
Package Contents : 1 x USB 3.0 to USB 2.0 Cable.
& nbsp;
Micro SATA Cables PN # USB3-USB2-INT-12IN
SATA 22 Pin Male to SATA 7 Pin and 2 X 15 Pin SATA Female Connectors - 6 Inch
Splitter cable allowing the cable to split off power from an existing SATA 22 Pin Power and DATA connection.Micro SATA Cables PN# P22PM-2X15PF-7P-6INAuthentic only if sold by Micro SATA Cables.Categories: 22 Pin SATA, 22 Pin SATA, Cables, SATA Cables
ATX 20 Pin Female to Male Extension Power Cable
- Description: ATX 20 Pin Power Supply Extension Cable This is a Power Extension Cable for your existing ATX 20 Pin power cables. Easily connects to all ATX 20PIN Power supplies. Connector: One ATX20-Pin Male to One ATX 20-PIN Female Extend the reach of your existing ATX 20-PIN power cable Cable length: 12 Inches ltem # ATX-20PF-20PM
Fiber Optic Cable - Multimode Duplex 50/125 - OFNP Plenum - SC/SC - 2 Meter
Fiber Optic Cable - Multimode Duplex 50/125 - OFNP Plenum - SC/SC - 2 Meter
Description:
This Fiber Optic Cable is 2 Meters in length.
Specifications:
Fiber Optic Cable
Multimode Duplex 50/125
SC/UPC-SC/UPC
2.0mm Tube
OFNP Plenum
SC/SC
2 Meter
Micro SATA Cables PN # FBR-1066-2M
QSFP+ to CX4 Copper Cable - 3 Meter
QSFP+ to CX4 Copper Cable 3 Meter
Description
QSFP to CX4/ 4x cables use cutting edge technology to provide an excellent hybrid cable solution for CX4/InfiniBand and QSFP rated switches, network adapters, and storage arrays. These cables have a QSFP connector on one end and a CX4 Connector on the opposite end. Each CX4-QSFP copper cable permits auto-negotiation between the two connected devices for optimal network throughput. Reaching data rates of up 5Gpbs per channel. Compatible with 4x Infiniband SDR/DDR and 10 GbE applications.
Cable Length is 3 Meters
Specifications
Connector A = QSFP
Connector B = CX4 (SFF-8470)
Conductor: Copper
Low cross-talk and pair-to-pair skew
Supports 10-Gigabit Ethernet
Supports QSFP, 10GBASE-CX4 and SDR/DDR InfiniBand
Fully compliant to QSFP MSA
RoHS Compliant
Applications
CX4/InfiniBand and QSFP rated switches
Network adapters
Storage arrays
Micro SATA Cables PN # QSFP-920-CX4
Micro SATA Cables Male Type A to Female Type A USB High Speed Extension cable
-Male type A to Female Type A USB High Speed Extension cable. Cable is approx. 9 inches in length.
U.2 ( SFF-8639 ) to Mini-SAS Cable for PCIe NVMe INTEL 750 SSD
U.2 ( SFF-8639 ) to Mini-SAS Cable for PCIe NVMe INTEL 750 SSD
Product Description:
U.2 ( SFF-8639 ) to Mini-SAS SFF-8643
Cable length: 50cms
?
Micro SATA Cables PN # U2-1173-50CM
USB 3.0 to SATA 3Gbps Convertor Adapter for 2.5" and 3.5" HDD
-Description : & bull; Transfer rate of Super-Speed USB 3.0 interface can be up to 3Gb/sec (Max) & bull; Chip: JM539 & bull; Supports Hot-Swapping and Plug and Play function & bull; Compliance with Serial ATA Specification Revision 2.6 & bull; Backward compatible with previous versions of USB ports (1.0, 1.1 & 2.0) & SATA hard disks (1.5Gb/s) & bull; Supports Mass Storage Class Drive. & bull; No driver installation required for WindowsXP/Vista/7 & bull; Need 5V power for 2.5" Hard Disk & bull; Need 12V 2A power for 3.5" Hard Disk System Requirements : Windows 7 (32-/64-bit) ) / Vista (32-/64-bit) / XP (32-/64-bit)/ Server 2003 & 2008 (32-/64-bit) with the latest Service Packs Package Includes : 1 X USB 3.0 to SATA adapter Micro SATA Cables PN # USB3-SATA-ADP-S
USB 3.0 to SATA 22P 2.5" Hard Disk Driver Adapter with USB Power Cable
-Description : USB 3.0 Male + USB 2.0 Power to SATA 22Pin Female Adapter Cable & bull; Cable length : 12 CM & bull; Transfer rate of Super-Speed USB 3.0 interface can be up to 5Gb/sec (Max) & bull; Supports Hot-Swapping and Plug and Play function & bull; Compliance with Serial ATA Specification Revision 2.6 & bull; Backward compatible with previous versions of USB ports (1.0, 1.1 & 2.0) & SATA hard disks (1.5Gb/s) & bull; Supports 2.5" Mass Storage Class Drive Micro SATA Cables PN # USB3-X2-SATA-CBL
HDMI Male (Type A) to HDMI Male (Type A) Adapter
HDMI Cables generally only come in one format, but sometimes you need to create your own solution, our handy HDMI to HDMI adapter Micro SATA Cables PN # HDMI-1215
HDMI Female (Type A) to 90 Degree Right Angle HDMI Male (Type A)
HDMI Cables generally only come in one format, but sometimes you need to create your own solution, our handy HDMI to HDMI adapter will help you solve bespoke cabling problems. Micro SATA Cables PN # HDMI-1208
Slimline SATA 13 Pin Female Connector Solder Socket for Cable Mount
SLIMLINE SATA 13P solder socket for cable mount
Description:
13 Pin Slimline SATA Connector (Slim SATA)
Slim SATA is the new standard for small form factor systems and optical drives for laptops. Slimline SATA cables are being commonly used in DVD burners for laptops and other systems.
Micro SATA Cables PN#X-13P-FSS
HDMI Male (Type A) to 270 Degree Bend HDMI Female (Type A) Adapter
HDMI Cables generally only come in one format, but sometimes you need to create your own solution, our handy HDMI to HDMI adapter will help you solve bespoke cabling problems. Micro SATA Cables PN # & nbsp; HDMI-1219
mSATA Board with MO-300A Clip with USB 2.0 Cable
Authentic only if sold by Micro SATA CablesmSATA Board with MO-300A Clip with USB 2.0 Cable Description: mSATA to a 1.8 micro SATA Adapter Card with a 16 Pin Micro SATA USB Cable Dimension of card : 73mm X 40mm X 7mm The card is compliant with 1.8 Inch Micro SATA specification. It supports 3.3 Volt Mini PCI-e SSD mSATA Modules Features: Mini PCIe mSATA SSD supports the MO-300A full size card. Form Factor: 50.95 mm (L) x 30 mm (W) x 3.8 mm (H) It may be used in any application where a 1.8 Inch Micro SATA SSD drive may be used or it can be connected to the Micro SATA 16 Pin USB cable for easy use through any USB 2.0 port. Micro SATA Cables PN #MST-16P-USBCBL
22 Pin SATA Male to Female Left Angle Power and Data Extension Cable - 8 inches
This is a 22 pin SATA male to female Left Angle power and data extension cable. The 22 pin SATA extension assembly contains both 15 pin Power and 7 pin DATA with both Female and Male connections. The cable is approx. 8 inches in length. Micro SATA Cables PN# P22PMWV22PFLA-8
5.5 mm OD x 2.5 mm ID Right Angled Power Cable
Authentic only if sold by Micro SATA Cables 5.5 mm OD x 2.5 mm ID Right Angled Power Cable Description: Power supply cable. The unit is a 5.5 x 2.5 ID barrel connector and is a 14 Inch length unit. The lead wires black and red are pre stripped exposed and dipped for soldering. Micro SATA Cables PN #: PWR-OD55-25ID-14
Micro SATA Cables SCSI 50 Pin to 80 Pin Adapter
This is a SCSI 50 pin to 80 pin card adapter.Micro SATA Cables PN # SCSI-ADPT
SFP+ Cable 10GbE SFP+ Direct Attach Copper Cable - 3 Meter
SFP+ Cable 10GbE SFP+ Direct Attach Copper Cable - 3 Meter
Description
These 10GbE SFP+ Direct Attach Copper Cables provide affordable 10-Gigabit Ethernet connectivity with any SFP+ enabled port. Each SFP+ cable utilizes an integrated 20-position & ldquo;board-as-connector & rdquo; design with zinc die-cast backshells for superior EMI performance and minimal insertion loss.
SFP+ Copper Twinax cables are suitable for very short distances and offer a highly cost-effective way to connect within racks and across adjacent racks. SFP+ cables offers a low cost SFP+ solution. SFP+ directly attached twinax cable assemblies supports 10 Gigabit Ethernet, and other industry standards.
Cable Length is 3 Meters in length.
Specifications
SFP+ to SFP+
Applications:
Networking, Storage, Telecommunications
Hub, Switches, Routers, Servers, Network Interface Card(NICs)
10Gigabit Ethernet
Data center cabling infrastructure
Micro SATA Cables PN# SFP-917-3M
Fiber Optic Cable - Multimode Duplex 50/125 - LSZH - LC/LC - 1 Meter
Fiber Optic Cable - Multimode Duplex 50/125 - LSZH - LC/LC - 1 Meter & zwnj;
Description:
This Fiber Optic Cable is 1 Meter in length.
Specifications:
Fiber Optic Cable
Multimode Duplex 50/125
LC/UPC-LC/UPC
LSZH
LC/LC
2.0mm Tube
1 Meter in length
Micro SATA Cables PN # FBR-1078-1M
Slimline SAS (SFF-8654) and SATA to M.2 SSD Adapter
Slimline SAS (SFF-8654) and SATA to M. 2 SSD Adapter M. 2 NVMe to Slimeline SAS(SFF-8654) Convert Specifications: M. 2 NVMe to Slimeline SAS (SFF-8654) convert M. 2 SATA I/F to SATA convert Build in M. 2 M-key Female connector Build in SFF-8654 connector, pin-out defined by PCIe Built in SATA 7+15 Pin connector PWM synchronous buck converter Power IC 4A maximum output current Short circuit protection In-rush current suppression Thermal shutdown protection ESD HBM (Human Body Mode) /2KV D1 Green LED on indicates M. 2 SATA I/F power ready D2 Green LED Blinking indicates M. 2 NVMe power ready D3 RED LED Blinking indicates M. 2 SSD active status Specification: Compliant with NVME Express 1.0A Supports PCI Express Base Specification Rev 3.0 Supports SSD Form Factor Version 1a Compliant with PCI Express M. 2 Specification Version 1.0 Compliant with SFF-8639 Specification Rev 2.0 Compliant with SerialATA_ Revision_3_2 _Gold s Compliant with SFF-8654 Rev 1.0 SSD's shown in pictures are for illustration only and are not included. M. 2 SSD Form Factor Support: Supports M. 2 Socket SSD type 2242, type 2260, type 2280 and type 22110 D2 - B - M Micro SATA Cables PN # SLM-1368-M2
Fiber Optic Cable - Multimode Duplex 50/125 - LSZH - LC/LC - 3 Meter
Fiber Optic Cable - Multimode Duplex 50/125 - LSZH - LC/LC - 3 Meter
Description:
This Fiber Optic Cable is 3 meters in length.
Specifications:
Fiber Optic Cable
Multimode Duplex 50/125
LC/UPC-LC/UPC
2.0mm Tube
LSZH
LC/LC
3 Meter
Micro SATA Cables PN # FBR-1076-3M
Micro SATA Cables ZIF 1.8 Inch to 44 Pin IDE Converter
- Description IDE Adapter Converts a 1.8 Inch ZIF HD to a 2.5 Inch 44 Pin IDE. Physical size: 60L x 30W x 6. 0H (mm) Item # ZIF 1.8 -IDE44
USB 3.0 to SATA Convertor Adapter for 2.5 Inch HDD
- Features: 1. Transfer rate of Super-Speed USB 3.0 interface can be up to 5Gb/sec (Max) 2. Supports Hot-Swapping and Plug and Play function 3. Compliance with Serial ATA Specification Revision 2.6 4. Backward compatible with previous versions of USB ports ( 1.0, 1.1 & 2.0 ) & SATA hard disks ( 1.5G b/s) 5. Supports Mass Storage Class Drive. 6. No driver installation required for WindowsXP/Vista/7 System Requirements: Windows 7 (32-/64-bit) ) / Vista (32-/64-bit) / XP (32-/64-bit)/ Server 2003 & 2008 (32-/64-bit) with the latest Service Packs Package: 1 X USB 3.0 to SATA Adapter Micro SATA Cables PN # USB3-22PIN-DNGL
mSATA to SATA Adapter
- mSATA to SATA Adapter mSATA SSD 50mm to 2.5 Inch SATA 22 Pin Adapter Description This is an mSATA to 2.5 inch SATA Adapter which allows users to operate any mSATA SSD in any standard SATA host controller. This adapter allows any mSATA SSD from any notebook or memory storage device to easily transfer data to a desktop PC or standard laptop with a 22 Pin 2.5 inch SATA connection. Designed for mSATA SSD's only. Not compatible with 50 mm Mini PCI-e SATA SSD NOTE: This adapter is built with a higher grade Voltage Regulator for system stability in test and burn in applications Item # MSATA-ADPT Micro SATA Cables PN # MSATA-ADPT
40G QSFP+ to 4 SFP+ Passive Cable - 1 Meter
40G QSFP+ to 4 SFP+ Passive Cable - 1 Meter
Description
QSFP to 4x SFP+ Splitter Cable offers IT professionals a cost-effective interconnect solution for merging 40G QSFP and 10G SFP+ enabled host adapters, switches and servers.
For typical applications, users can install this splitter cable between an available QSFP port on their 40 Gigabit/s rated switch and feed up to four upstream 10GbE-SFP+ enabled switches.Each QSFP-SFP+ splitter cable features a single QSFP connector (SFF-8436) rated for 40-Gb/s on one end and (4) SFP+ connectors (SFF-8431), each rated for 10-Gb/s, on the other.
Cable Length is 1 Meter. Contact us if a longer cable length is required.
Specifications
QSFP (40G) to 4x SFP+ (10G) Splitter Cable - 1 Meter
Connector A: (1) QSFP 40.0 Gbps Rated Connector (SFF-8436 Compliant)
Connector B: (4) SFP+ 10.0 Gbps Rated Connectors (SFF-8431 Compliant)
Economically Links up a QSFP port with an Upstream 10GbE-SFP+ Switch
Up to 10.3125 Gbps transfer rate per SFP+ channel (40 Gbps aggregate)
Fully compliant to the latest SFP+ & amp; QSFP MSA (Multi-Source-Agreement)
Designated form factor and electrical compliance for QDR InfiniBand
Fully RoHS compliant for environmental protection
Applications
InfiniBand SDR, DDR
Ethernet 1G, 10G
Rack-to-Rack, Shelf-to-Shelf Interconnect
Networking
Storage
Hubs, switches, routers, servers
Micro SATA Cables PN # QSFP-911-4SFP
22 Pin Male to 29 Pin Female SAS Adapter
SAS 22 Pin to 7 Pin + 15 Pin SATA Hard Disk Drive Raid Adapter with 15 Pin Power Port
This adapter you can connect a SAS HDD with SFF 8482 port to a SAS compatible SATA controller (hybrid controller).
Connector Details
Outer overmold mold measures 14.73mm
One End = 1 x 7 Pin SATA Male. + 1 x 15Pin Male (SATA Power Connector)
Other End = 1 x 22 Pin SAS (SFF 8482 port)
Micro SATA Cables PN: SAS-1410-MD
USB 2.0 Internal Motherboard Extension Cable 10 Inches
USB 2.0 Internal Motherboard Extension Cable 10 Inches
Description
USB 2.0 Internal Cable & nbsp;
2 Female Connectors
10 Pin Connectors are polarized
Color : Black Cable
Length : approx. & nbsp;10 Inches
2.54 mm Pitch
For use with PC’s for an internal motherboard USB 2.0 cable
USB 2.0Speed up to 480 MB/S & nbsp;
Item# USB-INT-10INX
HDMI Female (Type A) to HDMI Male (Type C) Adapter
Convert Mini HDMI (Type C) to standard HDMI (Type A), ideally suited for Intel NUC D54250WYK and similar. Micro SATA Cables PN # HDMI-1213
SFP+ Cable 10GbE SFP+ Direct Attach Copper Cable - 1 Meter
SFP+ Cable 10GbE SFP+ Direct Attach Copper Cable - 1 Meter
Description
These 10GbE SFP+ Direct Attach Copper Cables provide affordable 10-Gigabit Ethernet connectivity with any SFP+ enabled port. Each SFP+ cable utilizes an integrated 20-position & ldquo;board-as-connector & rdquo; design with zinc die-cast backshells for superior EMI performance and minimal insertion loss.
SFP+ Copper Twinax cables are suitable for very short distances and offer a highly cost-effective way to connect within racks and across adjacent racks. SFP+ cables offers a low cost SFP+ solution. SFP+ directly attached twinax cable assemblies supports 10 Gigabit Ethernet, and other industry standards.
Cable Length is 1 Meter.
& nbsp;
Specifications
SFP+ to SFP+
Applications:
Networking, Storage, Telecommunications
Hub, Switches, Routers, Servers, Network Interface Card(NICs)
10Gigabit Ethernet
Data center cabling infrastructure
Micro SATA Cables PN# SFP-915-1M
Micro SATA Cables USB 3.0 SD Card Reader
- USB 3.0 SD and Micro SD Card Reader Product Description: This is a USB 3.0 card reader?. Supports SD cards Micro SD Cards Color: White Micro SATA Cables PN # USB3-974-CRD
2.5" SATA SSD or HDD Drive to IDE 44 Pin IDE Adapter
Description
2.5 inch SATA SSD or HDD Drive to IDE 44pin converter Board.
Features
- Works with all SATA Drives up to 500GB
- Supports IDE 66/100/133MB/s
- No need for an extra power supply.
- 44 Pin IDE connector powers the Drive no other cables or adapters are needed.
- No driver needed, plug and play, unit is not hot swappable.
- Great for all Mini Computers that use 44 pin IDE connector and require an upgrade to new SATA 2.5 Inch Drives.
- Adapter is good for up grading an old computer with 2.5 inch IDE HDD to a new 2.5 inch SATA HDD or SSD.
- Dimensions: 2.72 x 0.55 x 0.69
- ( L 69mm xD 14mm x H 17mm )
Note : & nbsp;Please review dimensions before ordering this item. & nbsp;Product does not fit in all laptops.
Includes
1 x & nbsp;Converter Board & nbsp; 2.5 inch & nbsp;SATA to 44pin IDE Adapter
Item # IDE44-SATA22F
4-Pin Molex to Floppy Drive 4-Pin Female Power 8 inch Cable
4-Pin Molex to Floppy Drive 4-Pin Female Power 8 inch Cable Micro SATA Cables PN # PLP4F-P4F-8IN
2.5"/3.5" Drive SATA to ATA IDE Converter Adapter HDD
DESCRIPTION
2.5/3.5 Drive SATA to ATA IDE Converter Adapter HDD
Features
100% Brand New.
Converts all EIDE type Devices into a Serial ATA compliant device.
Converts parallel ATA to serial ATA I/II with 2.5/3.5/5.25 Drive.
Fit for SATA type devices, such as 2.5 3.5 IDE Hard Disk, DVD, DVD-RAM, CD-ROM, CD-RW etc.
It allows you to plug the converter to ATAPI, ATA/133, ATA/100, ATA/66, ATA/33, EIDE and IDE storage devices, and turns them into a Serial ATA compliant device.
Supports ATA 100/133 IDE.
No extra tools needed, easy to install.
Support Windows 98/SE/ME/2000/XP/Vista/2003, Mac OS 8.6 or above.
Includes
1 x 2.5/3.5 Drive SATA to ATA IDE Converter Adapter
Item # IDE40-SATA22F
QSFP+ to CX4 Copper Cable - 2 Meter
QSFP+ to CX4 Copper Cable - 2 Meter
Description
QSFP to CX4/ 4x cables use cutting edge technology to provide an excellent hybrid cable solution for CX4/InfiniBand and QSFP rated switches, network adapters, and storage arrays. These cables have a QSFP connector on one end and a CX4 Connector on the opposite end. Each CX4-QSFP copper cable permits auto-negotiation between the two connected devices for optimal network throughput. Reaching data rates of up 5Gpbs per channel. Compatible with 4x Infiniband SDR/DDR and 10 GbE applications.
Cable Length is 2 Meter
Specifications
Connector A = QSFP
Connector B = CX4 (SFF-8470)
Conductor: Copper
High performance 8 pair wire construction
Low cross-talk and pair-to-pair skew
Supports 10-Gigabit Ethernet
Supports QSFP, 10GBASE-CX4 and SDR/DDR InfiniBand
Fully compliant to QSFP MSA
RoHS Compliant
Applications
CX4/InfiniBand and QSFP rated switches
Network adapters
Storage arrays
Micro SATA Cables PN # QSFP-919-CX4
Fiber Optic Cable - Multimode Duplex 50/125 - OFNP Plenum - LC/ST - 1 Meter
Fiber Optic Cable - Multimode Duplex 50/125 - OFNP Plenum - LC/ST - 1 Meter
Description:
This Fiber Optic Cable is 1 Meter in length.
Specifications:
Fiber Optic Cable
Multimode Duplex 50/125
LC/UPC-ST/UPC
2.0mm Tube
OFNP Plenum
LC/ST
1 Meter
Micro SATA Cables PN # FBR-1070-1M
micro sata cables 1.8 inch hdd case enclosure for zif lif 24 pin samsung hs12uhe
This USB enclosure works with 1.8" Samsung 24 Pin ZIF HS12UHE Drives Description: Supports HDD Models by Samsung: HS12UHE and MMDOE28GXMSP USB 2.0, transfer rate up to 480 MB/s , backward support USB 1.1 USB powered device, no external power is needed to operate Aluminum Alloy outer layer making the unit durable and light Size : 98mm x 60mm x 9mm Compatible for Win 98 or up (Win 7 32-bit and 64-bit) /Mac / Linux Package Includes : 1 X 1.8 Inch CASE for LIF 24 Pin Drive 1 X USB DATA Cable 8 X Screws 1 X Screwdriver 1 X 1.8" USB soft carry bag Micro Sata Cable PN # CASE-1.8IN-24P-LIFUPC NO:794504426939 SKU:ADIB009B319N4
Mini SAS SFF-8087 36 Pin to 4 X 7 Pin SATA - 1 Meter
Description: Mini SAS SFF-8087 36 Pin to 4 X 7 Pin SATA - 1 Meter Connect your controller, enclosure rear bracket or expander with 36 pin mini SAS connectors to your backplane with SATA 7 pin connectors or directly to SATA hard disks. Specifications: Length: Cable is 1 meter Connector A: SFF-8087 (internal mini SAS 36 pin) Connector B: 4 X 7 pin SATA The additional cable is for sideband signal. If the controller card and backplane support SGPIO, then the sideband cable will allow for a check of activity/fault signals. Micro SATA Cables PN# SFF-718-1M
SAS 29 Pin Female to SAS 29 Pin Female Cable
- This is a SAS 29 Pin Female connector to a SAS 29 Pin Female Cable. It supports the 2 channels of the SAS Connectors. The cable is approximately 12 Inches in length. Micro SATA Cables PN # ADPCSASF-F-12IN
OCuLink SFF-8611 Right Angle Male to Right Angle Male Cable Assembly -7 Inches
OCuLink SFF-8611 Right Angle Male to Right Angle Male Cable Assembly Cable Length -7 Inches Micro SATA Cables PN # OCU-1700-CBL
SATA III to M.2/mSATA SSD Dual Port Adapter
This Adapter can function as either M. 2 or mSATA to SATA Adapter. Form factor: 2.5" 97*65mm approx. If insert both M. 2 and mSATA on this adapter, M. 2 is the first priority and the mSATA will not work. & nbsp; It will be M. 2 (SATA) SSD to SATA Adapter. The unit supports SATA III 6GB/s. If insert only mSATA on this adapter, it will be mSATA SSD to SATA Adapter. & nbsp; Supports SATA III 6GB/s. If insert only M. 2 on this adapter, it will be M. 2 SSD to SATA Adapter. Supports SATA III 6GB/s. Specifications 2.5" SATA SSD Form Factor: 98 x 65.5 mm M. 2 (NGFF) & amp; mSATA to SATA III Module Build in Mini PCI-e 52pin Female connector Build in M. 2 (NGFF) B key Female connector Green LED indicates power status Red LED indicates active status Insert both M. 2 & amp; mSATA SSD on S2083A, M. 2 SSD is the first priority. mSATA will not work. Support SATA Reversion 3.2 PCI Express M. 2 Spec. Revision 0.7, Version 1.0 PCI Express Mini Card Electromechanical Spec. 1.2 PWM synchronous buck converter Power IC 3A maximum output current Short circuit protection In-rush current suppression Thermal shutdown protection ESD HBM (Human Body Mode) /2KV Micro SATA Cables PN # M2-MSAT-DL-ADP
Internal Mini SAS SFF-8087 36 Pin Rt Angle to SFF8087 36 Pin Rt Angle Cable
SAS (Serial Attached SCSI) Data cable designed to connect high speed Serial SCSI devices. Latching connectors designed for reliable connection and small, space-saving design. Specifications High quality Cable Two latching internal SAS SFF-8087 right angled connectors One end is right angled type connector, and the other end is right angled type connector. RoHS Compliant Cable length: 250mm Package Includes: 1 x Mini SAS 36 Pin to Mini SAS 36 Pin right angle DATA cable Micro SATA Cables PN # SFF-1234-250MM
External Mini-SAS HD SFF-8644 to Mini-SAS SFF-8088 Cable 1 Meter
External Mini-SAS HD SFF-8644 to Mini-SAS SFF-8088 Cable 1 Meter
Description :
This External Mini-SAS HD SFF-8644 to Mini-SAS SFF-8088 cables maximizes storage interconnection performance and space. This Mini SAS HD to Mini SAS hybrid cable is guaranteed to perform at speeds of 6.0 Gbps per lane and features a SFF-8644 pull to release connector and a SFF-8088 push release on the opposite end.
Specifications :
Length = 1.0 Meter
Wire Size (AWG) = 30
Connector A = Mini SAS HD (SFF-8644)
Connector B = Mini SAS (SFF-8088)
Impedance = 100 Ohms
Data Rate = 6.00 Gb/s
Applications = Fibre Channel, Infiniband, and SAS 2.1 (Serial Attached SCSI) compliant
RoHS Compliant
Micro SATA Cables PN # SFF-757-1M
Internal Mini SAS SFF-8087 36 Pin to Mini SAS SFF-8087 36Pin - 0.70 Meter
Internal Mini SAS SFF-8087 36 Pin to Mini SAS SFF-8087 36Pin - 0.70 Meter Description: Mini SAS SFF-8087 36 Pin to Mini SAS SFF-8087 36Pin - Cable Length: 0.70 Meter Specifications: Length: Cable length is. 70 meter Wire Size (AWG): 26~30AWG Latch style for SFF8087: Press style Connector A: SFF-8087 (Internal Mini SAS) Connector B: SFF-8087 (Internal Mini SAS) Impedance: 100 Ohms Compliant to SAS- 2.1 specifications ROHS complaint UL approved components Micro SATA Cables PN # SFF-800-. 70M
Mini SAS SFF-8470 CX4 Infiniband to Mini SAS 36 Pin SFF-8087-1 Meter
Description:
Mini SAS SFF-8470 CX4 Infiniband to Mini SAS 36 Pin SFF-8087-1 Meter
The Internal SFF-8087 to SFF-8470 Cable is used to connect your internal multilane SATA or SAS controller with a SFF-8087 connector to an external enclosure with a SFF-8470 connector.
SFF-8470 CX4 Infiniband - we only use Fujitsu Infiniband connectos for the highest quality.
Micro SATA Cables PN# SFF-714-1M
External Mini-SAS HD SFF-8644 to Mini-SAS SFF-8470 Cable 1 Meter
External Mini-SAS HD SFF-8644 to Mini-SAS SFF-8470 Cable 1 Meter
Description:
External Mini-SAS HD to SAS cables maximize speed and port density for adapter cards, servers, and switches. This Mini SAS HD cable is guaranteed to perform at data-rates of 6.0 Gbps per lane and features a SFF-8644 pull to release connector on one end, and a SFF-8470 jack-screw connector on the opposite end. The pull tab connector is compatible with all mini-SAS HD (SFF-8644) ports.
Specifications:
Length = 1M
Wire Size (AWG) = 30
Connector A = Mini SAS HD (SFF-8644)
Connector B = SAS (SFF-8470)
Impedance = 100 Ohms
Data Rate & nbsp;= 6.00 Gb/s(Future SAS 3.0 12.00 Gb/s)
Applications = Fibre Channel, Infiniband, and SAS 2.1 (Serial Attached SCSI) compliant
RoHS Compliant
Micro SATA Cable PN # SFF-758-1M
External HD Mini SAS SFF-8644 to HD Mini SAS SFF-8644 Cable 1 Meter
External HD Mini SAS SFF-8644 to HD Mini SAS SFF-8644 Cable 1 Meter
Description:
The cable is a 1 Meter HD Mini SAS to HD Mini SAS Cable (SFF-8644/SFF-8644) with performance of 6.0 Gbps per lane. This Cable can be used in Infiniband, SAS 2.1 and Fibre Channel applications and it is RoHS compliant.
Specifications:
SFF-8644 and SAS 2.1 compliant and capable for SAS 3.0
Broad band design for 6 and 12Gbps
Serial Attached SCSI (SAS 2.1)
Serial Data Transmission
HBA (Host Bus Adapter)
Cable Length : 1 Meter
Micro SATA Cables PN # SFF-760-1M
Internal Mini SAS SFF-8087 Right Angle to Internal Mini SAS SFF-8087
- Internal Mini SAS SFF-8087 Right Angle to Internal Mini SAS SFF-8087. 75 Meter Cable Description: Internal 36 pin mini SAS interconnect between controllers, expanders, backplanes and internal-to-external adapters. 6G rated. Right angle on one end (connector bends away from the latch clip), straight on the other. Specifications: Connector A: SFF-8087 (internal mini SAS, 36 pin mini SAS) Connector B: SFF-8087 (internal mini SAS, 36 pin mini SAS) Application: Connect a controller to internal multi-drive backplane, where space is limited Length of Cable: 0.75 Meters Micro SATA Cables PN # SFF-796-. 75M
Micro SATA Cables SAS 32 Pin SFF-8484 to 29 Pin SAS SFF-8482 Hard Disk Cable with Power - 1 Meter
Stock located in USA. Items ordered by 4:30 PM EST ship same day. Contact Micro SATA Cables for FedEx Shipping options.Authentic only if sold by Micro SATA Cables?Internal SAS 32 Pin Host SFF-8484 to 29 Pin SAS Hard Disk SFF-8482 Cable Description: SAS SFF-8484 to 1 X SAS Cable Cable is 1 Meter in length. Micro SATA Cables PN # SFF-801-1M
SAS 29 Pin Female to SAS 29 Pin Female 20 Inch Cable
- This is a SAS 29 Pin Female connector to a SAS 29 Pin Female Cable. It supports the 2 channels of the SAS Connectors. The cable is approximately 20 Inches in length. Cable is SATA III Color Black. Micro SATA Cables PN # ADPCSASF-F-20IN
Mini SAS SFF-8087 36 Pin to Mini SAS SFF-8087 36Pin - 0.5 Meter
Description:
Mini SAS SFF-8087 36 Pin to Mini SAS SFF-8087 36Pin - 0.5 Meter
Specifications:
Length: Cable length is .5 meter
Wire Size (AWG): 26~30AWG
Latch style for SFF-8087 Press style
Connector A: SFF-8087 (Internal Mini SAS)
Connector B: SFF-8087 (Internal Mini SAS)
Impedance: 100 Ohms
Compliant to SAS-2.1 specifications
ROHS complaint
UL approved components
Micro SATA Cables PN# SFF-715-0.5M
External Infiniband SAS SFF-8470 to 4 X SAS SFF-8482 29 Pin -1 Meter
External Infiniband SAS SFF-8470 to 4 X SAS SFF-8482 29 Pin -1 Meter
Description:
High Quality Infiniband Multilane cable SFF-8470 Thumbscrews to 4 X SAS 29 Pin female connectors.
Cable length is 1 Meter
Micro SATA Cables PN# SFF-712-1M
External Mini SAS SFF-8088 to a Mini SAS High Density HD SFF-8643 Cable 1 Meter
Authentic only if sold by Micro SATA Cables External Mini SAS SFF-8088 to a Mini SAS High Density HD SFF-8643 Cable 1 Meter Description: HD Mini-SAS cable configurations It is an External Mini SAS SFF-8088 to mini SAS High Density HD SFF-8643 data Server hard disk raid Cable It is used for connecting a SAS/SATA adapter to a SAS/SATA backplane. The High Density (HD) system referenced as HD Mini-SAS (SFF-8643) in the SAS 2.1 standard, meets the 6Gb/s SAS specification. These new HD Connectors will be used on the SAS 3.0 specification when it is released. Cable material may change but the connectors will be the next generation of SAS to run at 12Gb/s. Internal HD Mini-SAS Copper Cables Length: 1M Micro SATA Cables PN # SFF-752-1M
External HD Mini SAS SFF-8644 to HD Mini SAS SFF-8644 Cable 2 Meter
External HD Mini SAS SFF-8644 to HD Mini SAS SFF-8644 Cable 2 Meter
Description:
The cable is a 2 Meter HD Mini SAS to HD Mini SAS Cable (SFF-8644/SFF-8644) with performance of 6.0 Gbps per lane. This Cable can be used in Infiniband, SAS 2.1 and Fibre Channel applications and it is RoHS compliant.
Specifications:
SFF-8644 and SAS 2.1 compliant and capable for SAS 3.0
Broad band design for 6 and 12Gbps
Serial Attached SCSI (SAS 2.1)
Serial Data Transmission
HBA (Host Bus Adapter)
Cable Length : 2 Meter
Micro SATA Cables PN # SFF-938-2M
SFF-8639 68 Pin U.2 Cable Extension Cable - 1 Meter
Description
This SFF8639 male to female extension cable is 1 Meter in length.
Micro SATA Cables PN# SFF-1143-1M
SFF-8639 68 Pin U.2 Cable Extension Cable - 1.5 Meter
Description
This SFF8639 male to female extension cable is 1.5 Meter in length.
Micro SATA Cables PN# SFF-1136-1.5M
