Nexhi® 50 feet Mic Patch Cords Cables XLR Male to XLR Female Black - 50 feet Balanced Mike Snake Cord
Nexhi 50 feet Mic Patch Cords Cables XLR Male to XLR Female Black - 50 feet Balanced Mike Snake Cord Professional Series Noise Free Mic Cables. They have a thick, high quality, flexible rubber jacket. They are heavy duty Noise Free "True Balanced LO-Z" and have 3 pin XLR connectors on each end. These cables have dual insulated.
They are hand wired & hand soldered and has high quality metal ends. They have a double strain relief on each end. As you can see in the above picture, the female locking end has a rubber grommet. This allows the cable to snap into place without being loose and sloppy like most other cables you may find..50 feet Mic Patch Cords Cables XLR Male to XLR Female Black.High
Performance cable.Professional Series Noise Free Mic Cables.heavy duty Noise Free "True Balanced LO-Z" and have 3 pin XLR connectors on each end..double strain relief on each end
LC-SC Fiber Optic Patch Cord, Duplex, Multimode (OM2), Orange, 20 Meters
Nexhi offers an LC to ST fiber optic patch cord. The LC-ST patch cable is constructed with Corning MF-50 OM2 glass in AB to BA polarity to support laser optimized multimode fiber LOMMF and high speed cabling networks. The LC to ST fiber optic patch cable is OM2 50/125 duplex tight buffered. The orange jacket material around the OM2 50 125 multimode fiber optic cable is a polyolefin halogen free flame retardant compound for OFNR safety rating. It is colored orange to signify the fiber optic jumper cable is suitable for high speed networking. The LC-ST patch cord is assembled with LC and ST connectors for a high density data center environment. This breakout cable can reduce bulk fiber optic cabling by 50% with a 2mm duplex round cord. Each assembly is 100% factory tested to meet Bellcore GR-326 and TIA/EIA standards with a maximum insertion loss at 0.2dB. The data center grade duplex LC and ST fiber connectors meet EIA/TIA 604-2 standards with ceramic ferrule. The ferrule on the end of the multimode fiber cable is pre-polished for a consequently consistent performance. Operating temperature for this OM2 fiber is -20C to +70C and minimum bend radius is 1.18in. Nexhi LC-ST fiber patch cable is RoHS compliant and complies with industry standards. Each fiber optic patch cord is factory built and tested. Test reports are included.
LC-ST Fiber Optic Patch Cord, Duplex, Singlemode (OS1), Yellow, 1 Meter
Product Description
ST-LC 9/125 (OS1) Duplex Singlemode OFNR Fiber Optic Patch Cord - Yellow
Rating: 9/125 Singlemode
Fiber Polarity: AB-BA
Color: Yellow
Jacket: OFNR
Packaging: Individual pack
RoHS: Compliant
Product Features
Fully compatible with 9/125 singlemode fiber applications.
Our OFNR Duplex 2.0mm cable with yellow cable jacket and Duplex ST connector to Duplex LC connector.
Factory terminated with individual test data.
Custom variations available.
Product Specifications
Connector Type: ST DUPLEX to LC DUPLEX
Fiber Type: 9/125 singlemode
Jacket Color: Yellow Jacket
LC Fiber Optic Patch Cord, Duplex, Singlemode (OS1), Yellow, 10 Meters
Product Description
LC-LC 9/125 (OS1) Duplex singlemode OFNR Fiber Optic Patch Cord - Yellow
Rating: 9/125 Singlemode
Fiber Polarity: AB-BA
Jacket: OFNR
Packaging: Individual pack
RoHS: Compliant
Product Features
Constructed with Corning® SMF-28e+ glass for high performance singlemode applications.
It is ITU-T G.652.D compliant and fully backward compatible.
Each assembly is 100% factory tested to meet Bellcore GR-326 standard.
Maximum insertion loss is 0.2dB and minimum return loss is -55dB.
Operating temperature is -20C to +70C and minimum bend radius is 1.18in.
Product Specifications
Cable is singlemode duplex tight buffered.
Jacket material is PVC with OFNR safety rating.
Cable outer diameter is 1.8mm~2.0mm.
Connector meets EIA/TIA 604-2 standards with ceramic ferrule
Nexhi- 3M OS2 LC LC Fiber Patch Cable | Duplex 9/125 LC to LC Singlemode Jumper 3 Meter (9.84ft) | Length Options: 0.5M-300M | 1g 10g sfp 10gbase lc/l
Fiber Cable Description: OS2 LC to LC Fiber Patch Cable 3 Meter | 10Gig Duplex Single Mode fiber optic cable, 9/125 Corning optical fiber, yellow, OFNR (riser rated), 2.0mm outer diameter, zip-cord reinforced, PVC jacket. | Education, Corporate, Military/Defense, Government, Healthcare, Finance, General Commercial, Computer Networking Applications.
Fiber Patch Cable Details: 3 Meter (9.84 feet), duplex (2 fiber strands), 2.0mm outer diameter, zip-cord reinforced, LC to LC terminated (Max Connector Loss: 0.50 dB, Typical Connector Loss: 0.30 dB, Typical Return Loss -55 dB), Singlemode Fiber (SMF) Optical Patch Cable / Jumper Cord.
Core / Cladding: Corning 9 micron diameter fiber core / 125 micron diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding.
Optical Mode Type: OS2 (9/125 Singlemode) - 10 Gigabit speed from 5-10km at 1310nm (10Gbase-L) and 30-40km at 1550nm (10Gbase-E) with 0.4 dB/km maximum attenuation, atm applications. Audio, video, sfp data services supported. ISO / IEC 24702
Durable Commercial Grade Construction, Cost Effective and Built to Last | 100% Lifetime Warranty On All Products Purchased From Fiber Cables Direct.
Nexhi NXH-DC12V/1A-PA DC12V 1AMP Power Supply For Security Camera
The power Supply provides 12V DC power sources for surveillance security cameras. This power Supply 100V - 240V AC sources to 12V DC sources with a maximum current of 1A.
LC-SC Fiber Optic Patch Cord, Duplex, Multimode (OM1), Orange, 6 Meters
Product Description
SC-LC 62.5/125 (OM1) Duplex Multimode OFNR Fiber Optic Patch Cord - Orange
Product Features
Fully compatible with 62.5/125 multimode fiber applications.
Our OFNR Duplex 2.0mm cable with orange jacket and Duplex SC connector to Duplex LC connector.
Factory terminated with individual test data.
Custom variations available.
Product Specifications
Connector Type: SC DUPLEX to LC DUPLEX
Fiber Type: 62.5/125 Multimode
Jacket Color: Orange Jacket
Length: 1M - 30M
MPO Fiber Optic Patch Cord, Singlemode (OS1) Yellow Cable with 12 Fibers, 15 Meters
Features:
Small and compact design
Keyed for easy and quick installation
Push; pull release similar to SC fiber connector
Fully compatible with MTP assembly
Work with MPO/MTP cassettes to save time and labor
Length: 15M
Applications:
Fast Ethernet
Gigabit Ethernet
Fibre Channel
10G Ethernet
Specifications:
Insertion Loss:
Multimode:
LC-ST Fiber Optic Patch Cord, Duplex, Multimode (OM1), Orange, 3 Meters
Product Descrption
ST-LC 62.5/125 (OM1) Duplex Multimode OFNR Fiber Optic Patch Cord - Orange
Product Features
Fully compatible with 62.5/125 multimode fiber applications.
Our OFNR Duplex 2.0mm cable with orange cable jacket and Duplex ST connector to Duplex LC connector.
Factory terminated with individual test data.
Custom variations available.
Product Specifications
Connector Type: ST DUPLEX to LC DUPLEX
Fiber Type: 62.5/125 multimode
Jacket Color: Orange Jacket
Length: 1M - 30M
LC Fiber Optic Patch Cord, Duplex, Singlemode (OS1), Yellow, 35 Meters
Nexhi offers an LC-LC fiber optic patch cord. The LC patch cable is constructed with Corning SMF-28 Ultra OS1 glass in AB to BA polarity to support high speed singlemode (SM) data transmissions. The LC fiber optic patch cable is OS1 9/125 duplex tight buffered. The yellow jacket material around the OS1 9 125 singlemode fiber optic cable is a polyolefin halogen free flame retardant compound for OFNR safety rating. It is colored yellow to signify the fiber optic jumper cable is suitable for single mode high speed networking. The LC/LC patch cord is assembled with LC connectors for a high density data center environment. This breakout cable can reduce bulk fiber optic cabling by 50% with a 2mm duplex round cord. Each assembly is 100% factory tested to meet Bellcore GR-326 and TIA/EIA standards with a maximum insertion loss at 0.2dB. The data center grade duplex LC fiber connector meets EIA/TIA 604-2 standards with ceramic ferrule. The ferrule on the end of the singlemode fiber cable is pre-polished for a consequently consistent performance. Operating temperature for this OS1 fiber is -20C to +70C and minimum bend radius is 1.18in. Nexhi LC patch cable is RoHS compliant and complies with industry standards. Each fiber optic patch cord is factory built and tested. Test reports are included.
LC Uniboot Fiber Optic Patch Cord, Duplex, 10 Gb Multimode (OM3), Aqua, 5 Meters
Nexhi offers an LC Uniboot fiber optic patch cord. The LC to LC uniboot patch cable is constructed with Corning® Clearcurve® OM3 glass in AB to BA polarity to support laser optimized multimode fiber LOMMF and high speed 10G cabling networks. The LC-LC fiber optic patch cable is OM3 50/125 duplex tight buffered. The aqua jacket material around the OM3 50 125 multimode fiber optic cable is a polyolefin halogen free flame retardant compound for OFNR safety rating. It is colored aqua to signify the fiber optic jumper cable is suitable for 10Gb networking. The LC/LC uniboot patch cord is assembled with uniboot LC connectors for a high density data center environment. This breakout cable can reduce bulk fiber optic cabling by 50% with a 2mm duplex round cord. Each assembly is 100% factory tested to meet Bellcore GR-326 and TIA/EIA standard with a maximum insertion loss at 0.2dB. The data center grade duplex LC-LC fiber connector meets EIA/TIA 604-2 standards with ceramic ferrule. The ferrule on the end of the multimode fiber cable is pre-polished for a consequently consistent performance. Operating temperature for this OM3 fiber is -20C to +70C and minimum bend radius is 1.18in. Nexhi LC patch cable is RoHS compliant and complies with industry standards. Each fiber optic patch cord is factory built and tested. Test reports are included.
LC Fiber Optic Patch Cord, Duplex, Multimode (OM1), Orange, 10 Meters
Product Description
62.5/125 DUPLEX OFNR LC TO LC ORANGE
Rating: 62.5/125 Multimode
Wiring: Wired AB-BA
Color: Orange
Jacket: OFNR
Packaging: Individual pack
RoHS: Compliant
Product Features
Constructed with Corning® MF-62.5 glass for high performance multimode 62.5/125 applications.
Each assembly is 100% factory tested to meet Bellcore GR-326 standard with maximum insertion loss at 0.2dB.
Operating temperature is -20C to +70C and minimum bend radius is 1.18in.
Product Specifications
Cable is 62.5/125 duplex tight buffered.
Jacket material is PVC with OFNR safety rating.
Cable outer diameter is 1.8mm~2.0mm.
Connector meets EIA/TIA 604-2 standards with ceramic ferrule.
The ferrule is pre-polished for a consequently consistent performance.
Length: 1M to 30M
ST Fiber Optic Patch Cord, Duplex, Multimode (OM2), Orange, 7 Meters
Nexhi offers an ST fiber optic patch cord. The ST-ST patch cable is constructed with Corning MF-50 OM2 glass in AB to BA polarity to support laser optimized multimode fiber LOMMF and high speed cabling networks. The ST to ST fiber optic patch cable is OM2 50/125 duplex tight buffered. The orange jacket material around the OM2 50 125 multimode fiber optic cable is a polyolefin halogen free flame retardant compound for OFNR safety rating. It is colored orange to signify the fiber optic jumper cable is suitable for high speed networking. The ST patch cord is assembled with ST connectors for a high density data center environment. This breakout cable can reduce bulk fiber optic cabling by 50% with a 2mm duplex round cord. Each assembly is 100% factory tested to meet Bellcore GR-326 and TIA/EIA standards with a maximum insertion loss at 0.2dB. The data center grade duplex ST fiber connector meets EIA/TIA 604-2 standards with ceramic ferrule. The ferrule on the end of the multimode fiber cable is pre-polished for a consequently consistent performance. Operating temperature for this OM2 fiber is -20C to +70C and minimum bend radius is 1.18in. Nexhi ST patch cable is RoHS compliant and complies with industry standards. Each fiber optic patch cord is factory built and tested. Test reports are included.
LC-SC Fiber Optic Patch Cord, Duplex, Singlemode (OS1), Yellow, 4 Meters
Product Description
SC-LC 9/125 (OS1) Duplex Singlemode OFNR Fiber Optic Patch Cord - Yellow
Rating: 9/125 Singlemode
Fiber Polarity: AB-BA
Jacket: OFNR
Packaging: Individual pack
RoHS: Compliant
Product Features
Constructed with Corning® SMF-28e+ glass for high performance singlemode applications.
It is ITU-T G.652.D compliant and fully backward compatible.
Each assembly is 100% factory tested to meet Bellcore GR-326 standard.
Maximum insertion loss is 0.2dB and minimum return loss is -55dB. Operating temperature is -20C to +70C and minimum bend radius is 1.18in.
Product Specifications
Cable is singlemode duplex tight buffered.
Jacket material is PVC with OFNR safety rating.
Cable outer diameter is 1.8mm~2.0mm.
Connector meets EIA/TIA 604-2 standards with ceramic ferrule.
The ferrule is pre-polished for a consequently consistent performance.
LC-SC Fiber Optic Patch Cord, Duplex, 10 Gb Multimode (OM3), Aqua, 15 Meters
Nexhi offers an LC to SC fiber optic patch cord. The LC-SC patch cable is constructed with Corning® Clearcurve® OM3 glass in AB to BA polarity to support laser optimized multimode fiber LOMMF and high speed 10G cabling networks. The LC to SC fiber optic patch cable is OM3 50/125 duplex tight buffered. The aqua jacket material around the OM3 50 125 multimode fiber optic cable is a polyolefin halogen free flame retardant compound for OFNR safety rating. It is colored aqua to signify the fiber optic jumper cable is suitable for 10Gb networking. The LC/SC patch cord is assembled with LC and SC connectors for a high density data center environment. This breakout cable can reduce bulk fiber optic cabling by 50% with a 2mm duplex round cord. Each assembly is 100% factory tested to meet Bellcore GR-326 and TIA/EIA standard with a maximum insertion loss at 0.2dB. The data center grade duplex LC and SC fiber connectors meet EIA/TIA 604-2 standards with ceramic ferrule. The ferrule on the end of the multimode fiber cable is pre-polished for a consequently consistent performance. Operating temperature for this OM3 fiber is -20C to +70C and minimum bend radius is 1.18in. Nexhi LC to SC patch cable is RoHS compliant and complies with industry standards. Each fiber optic patch cord is factory built and tested. Test reports are included.
LC-SC Fiber Optic Patch Cord, Duplex, Multimode (OM2), Orange, 8 Meters
Nexhi offers an LC to ST fiber optic patch cord. The LC-ST patch cable is constructed with Corning MF-50 OM2 glass in AB to BA polarity to support laser optimized multimode fiber LOMMF and high speed cabling networks. The LC to ST fiber optic patch cable is OM2 50/125 duplex tight buffered. The orange jacket material around the OM2 50 125 multimode fiber optic cable is a polyolefin halogen free flame retardant compound for OFNR safety rating. It is colored orange to signify the fiber optic jumper cable is suitable for high speed networking. The LC-ST patch cord is assembled with LC and ST connectors for a high density data center environment. This breakout cable can reduce bulk fiber optic cabling by 50% with a 2mm duplex round cord. Each assembly is 100% factory tested to meet Bellcore GR-326 and TIA/EIA standards with a maximum insertion loss at 0.2dB. The data center grade duplex LC and ST fiber connectors meet EIA/TIA 604-2 standards with ceramic ferrule. The ferrule on the end of the multimode fiber cable is pre-polished for a consequently consistent performance. Operating temperature for this OM2 fiber is -20C to +70C and minimum bend radius is 1.18in. Nexhi LC-ST fiber patch cable is RoHS compliant and complies with industry standards. Each fiber optic patch cord is factory built and tested. Test reports are included.
LC Fiber Optic Patch Cord, Duplex, Singlemode (OS1), Yellow, 13 Meters
Nexhi offers an LC-LC fiber optic patch cord. The LC patch cable is constructed with Corning SMF-28 Ultra OS1 glass in AB to BA polarity to support high speed singlemode (SM) data transmissions. The LC fiber optic patch cable is OS1 9/125 duplex tight buffered. The yellow jacket material around the OS1 9 125 singlemode fiber optic cable is a polyolefin halogen free flame retardant compound for OFNR safety rating. It is colored yellow to signify the fiber optic jumper cable is suitable for single mode high speed networking. The LC/LC patch cord is assembled with LC connectors for a high density data center environment. This breakout cable can reduce bulk fiber optic cabling by 50% with a 2mm duplex round cord. Each assembly is 100% factory tested to meet Bellcore GR-326 and TIA/EIA standards with a maximum insertion loss at 0.2dB. The data center grade duplex LC fiber connector meets EIA/TIA 604-2 standards with ceramic ferrule. The ferrule on the end of the singlemode fiber cable is pre-polished for a consequently consistent performance. Operating temperature for this OS1 fiber is -20C to +70C and minimum bend radius is 1.18in. Nexhi LC patch cable is RoHS compliant and complies with industry standards. Each fiber optic patch cord is factory built and tested. Test reports are included.
LC Fiber Optic Patch Cord, Duplex, Singlemode (OS1), Yellow, 1 Foot
Desc: Singlemode Duplex OFNR LC to LC
Rating: 9/125 Singlemode
Fiber Polarity: AB-BA
Jacket: OFNR
Packaging: Individual pack
RoHS: Compliant
Features:
Constructed with Corning® SMF-28e+ glass for high performance singlemode applications. It is ITU-T G.652.D compliant and fully backward compatible. Each assembly is 100% factory tested to meet Bellcore GR-326 standard. Maximum insertion loss is 0.2dB and minimum return loss is -55dB. Operating temperature is -20C to +70C and minimum bend radius is 1.18in.
Specifications:
Cable is singlemode duplex tight buffered. Jacket material is PVC with OFNR safety rating. Cable outer diameter is 1.8mm~2.0mm. Connector meets EIA/TIA 604-2 standards with ceramic ferrule. The ferrule is pre-polished for a consequently consistent performance.
SC Fiber Optic Patch Cord, Duplex, Singlemode (OS1), Yellow, 3 Meters
Description: Singlemode Duplex OFNR SC To SC Yellow
Rating: 9/125 Singlemode
Wiring: Wired AB-BA
Color: Yellow
Jacket: OFNR
Packaging: Individual pack
RoHS: Compliant
Feature:
Constructed with Corning® SMF-28e+ glass for high performance singlemode applications. It is ITU-T G.652.D compliant and fully backward compatible. Each assembly is 100% factory tested to meet Bellcore GR-326 standard. Maximum insertion loss is 0.2dB and minimum return loss is -55dB. Operating temperature is -20C to +70C and minimum bend radius is 1.18in.
Specification:
Cable is singlemode duplex tight buffered. Jacket material is PVC with OFNR safety rating. Cable outer diameter is 1.8mm~2.0mm. Connector meets EIA/TIA 604-2 standards with ceramic ferrule. The ferrule is pre-polished for a consequently consistent performance
LC Uniboot Fiber Optic Patch Cord, Duplex, 10 Gb Multimode (OM4), Aqua, 3 Meter
Nexhi offers an LC Uniboot fiber optic patch cord. The LC uniboot patch cable is constructed with Corning® Clearcurve® OM4 glass in AB to BA polarity to support laser optimized multimode fiber LOMMF and high speed 10G cabling networks. The LC fiber optic patch cable is OM4 50/125 duplex tight buffered. The aqua jacket material around the OM4 50 125 multimode fiber optic cable is a polyolefin halogen free flame retardant compound for LSZH safety rating. It is colored aqua to signify the fiber optic jumper cable is suitable for 10Gb networking. The LC uniboot patch cord is assembled with uniboot LC connectors for a high density data center environment. This breakout cable can reduce bulk fiber optic cabling by 50% with a 2mm duplex round cord. Each assembly is 100% factory tested to meet Bellcore GR-326 and TIA/EIA standard with a maximum insertion loss at 0.2dB. The data center grade duplex LC fiber connector meets EIA/TIA 604-2 standards with ceramic ferrule. The ferrule on the end of the multimode fiber cable is pre-polished for a consequently consistent performance. Operating temperature for this OM4 fiber is -20C to +70C and minimum bend radius is 1.18in. Cablesys LC patch cable is RoHS compliant and complies with IEEE 802.3, IEC-60793-1-10 and TIA-492AAAD OM4 standards. Each fiber optic patch cord is factory built and tested. Test reports are included.
LC-SC Fiber Optic Patch Cord, Duplex, Singlemode (OS1), Yellow, 3 Meters
Product Description
SC-LC 9/125 (OS1) Duplex Singlemode OFNR Fiber Optic Patch Cord - Yellow
Rating: 9/125 Singlemode
Fiber Polarity: AB-BA
Jacket: OFNR
Packaging: Individual pack
RoHS: Compliant
Product Features
Constructed with Corning® SMF-28e+ glass for high performance singlemode applications.
It is ITU-T G.652.D compliant and fully backward compatible.
Each assembly is 100% factory tested to meet Bellcore GR-326 standard.
Maximum insertion loss is 0.2dB and minimum return loss is -55dB. Operating temperature is -20C to +70C and minimum bend radius is 1.18in.
Product Specifications
Cable is singlemode duplex tight buffered.
Jacket material is PVC with OFNR safety rating.
Cable outer diameter is 1.8mm~2.0mm.
Connector meets EIA/TIA 604-2 standards with ceramic ferrule.
The ferrule is pre-polished for a consequently consistent performance.
SC Fiber Optic Patch Cord, Duplex, 10 Gb Multimode (OM3), Aqua, 3 Meters
Nexhi offers an SC to SC fiber optic patch cord. The SC patch cable is constructed with Corning® Clearcurve® OM3 glass in AB to BA polarity to support laser optimized multimode fiber LOMMF and high speed 10G cabling networks. The SC fiber optic patch cable is OM3 50/125 duplex tight buffered. The aqua jacket material around the OM3 50 125 multimode fiber optic cable is a polyolefin halogen free flame retardant compound for OFNR safety rating. It is colored aqua to signify the fiber optic jumper cable is suitable for 10Gb networking. The SC patch cord is assembled with SC connectors for a high density data center environment. This breakout cable can reduce bulk fiber optic cabling by 50% with a 2mm duplex round cord. Each assembly is 100% factory tested to meet Bellcore GR-326 and TIA/EIA standard with a maximum insertion loss at 0.2dB. The data center grade duplex SC fiber connectors meet EIA/TIA 604-2 standards with ceramic ferrule. The ferrule on the end of the multimode fiber cable is pre-polished for a consequently consistent performance. Operating temperature for this OM3 fiber is -20C to +70C and minimum bend radius is 1.18in. Nexhi SC patch cable is RoHS compliant and complies with industry standards. Each fiber optic patch cord is factory built and tested. Test reports are included.
SC Fiber Optic Patch Cord, Duplex, Singlemode (OS1), Yellow, 5 Meters
Description: Singlemode Duplex OFNR SC To SC Yellow
Rating: 9/125 Singlemode
Wiring: Wired AB-BA
Color: Yellow
Jacket: OFNR
Packaging: Individual pack
RoHS: Compliant
Feature:
Constructed with Corning® SMF-28e+ glass for high performance singlemode applications. It is ITU-T G.652.D compliant and fully backward compatible. Each assembly is 100% factory tested to meet Bellcore GR-326 standard. Maximum insertion loss is 0.2dB and minimum return loss is -55dB. Operating temperature is -20C to +70C and minimum bend radius is 1.18in.
Specification:
Cable is singlemode duplex tight buffered. Jacket material is PVC with OFNR safety rating. Cable outer diameter is 1.8mm~2.0mm. Connector meets EIA/TIA 604-2 standards with ceramic ferrule. The ferrule is pre-polished for a consequently consistent performance
nexhi 10w101210bu power cord with pc, 10', blue/black
The power cord is commonly used between computer or networking devices to a 2.5 prong male plug used in most households and businesses. Cords are shipped coiled and ready for installation not kinked.UPC NO:609408739514 SKU:ADIB00R3FBGU8
Nexhi® POWER CORD, Black, 3 ft. W/PC, Blue
POWER CORD NEMA 5-15P / IEC320 C13 , Black, 3 ft. W/PC, Blue
Nexhi C14/C19 14AWG SJT 15A/250V 2', Blue
Device to PDU (Power Distribution Unit). The power cord is commonly used for high current computer and networking devices to a PDUs in a data center rack or cabinet.
Nexhi® POWER CORD 14 AWG C14/C15 3FT RED
POWER CORD 14 AWG C14/C15 3FT RED
Nexhi Power Ext. Cord, pc/mon., 4' L, Blue
Order the length that you need to help increase airflow, reduce power loss, reduce contact with Ethernet cords with the right size power cord.
Nexhi ZIP-AUDIO-PC2 Retractable Stereo VoIP Cable - Black
Easily extends to over 48 by pulling both ends. Simply pull again and it quickly retracts back into its housing
Less than 4 long when retracted!
In ear earbuds provide you with superior comfort, portability and performance, while providing exceptional sound
Ideal for Voice-Over-IP, speech recognition or video conferencing applications
Nexhi 10W1-1920-02-RD C19 to C20 12AWG 20A 250V Cables, Red
Voltage: 250 volts AC. Amperage: 20 Amps . Label cable length in FT on both ends. Applications: high end server device to PDU (power distribution unit).
LC-SC Fiber Optic Patch Cord, Duplex, 10 Gb Multimode (OM3), Aqua, 7 Meters
Nexhi offers an LC to SC fiber optic patch cord. The LC-SC patch cable is constructed with Corning® Clearcurve® OM3 glass in AB to BA polarity to support laser optimized multimode fiber LOMMF and high speed 10G cabling networks. The LC to SC fiber optic patch cable is OM3 50/125 duplex tight buffered. The aqua jacket material around the OM3 50 125 multimode fiber optic cable is a polyolefin halogen free flame retardant compound for OFNR safety rating. It is colored aqua to signify the fiber optic jumper cable is suitable for 10Gb networking. The LC/SC patch cord is assembled with LC and SC connectors for a high density data center environment. This breakout cable can reduce bulk fiber optic cabling by 50% with a 2mm duplex round cord. Each assembly is 100% factory tested to meet Bellcore GR-326 and TIA/EIA standard with a maximum insertion loss at 0.2dB. The data center grade duplex LC and SC fiber connectors meet EIA/TIA 604-2 standards with ceramic ferrule. The ferrule on the end of the multimode fiber cable is pre-polished for a consequently consistent performance. Operating temperature for this OM3 fiber is -20C to +70C and minimum bend radius is 1.18in. Nexhi LC to SC patch cable is RoHS compliant and complies with industry standards. Each fiber optic patch cord is factory built and tested. Test reports are included.
LC-SC Fiber Optic Patch Cord, Duplex, Multimode (OM2), Orange, 2 Meters
Product Description
SC_LC 50/125 (OM2) Duplex Multimode OFNR Fiber Optic Patch Cord - Orange
Product Features
Fully compatible with 50/125 multimode fiber applications.
Our OFNR Duplex 2.0mm cable with orange cable jacket and Duplex SC connector to Duplex LC connector.
Factory terminated with individual test data.
Custom variations available.
Product Specifications
Connector Type: SC DUPLEX to LC DUPLEX
Fiber Type: 50/125 multimode
Jacket Color: Orange Jacket
Length: 1M -30M
LC-ST Fiber Optic Patch Cord, Duplex, Singlemode (OS1), Yellow, 7 Meters
Nexhi offers an LC-ST fiber optic patch cord. The LC-ST patch cable is constructed with Corning SMF-28 Ultra OS1 glass in AB to BA polarity to support high speed singlemode (SM) data transmissions. The LC/ST fiber optic patch cable is OS1 9/125 duplex tight buffered. The yellow jacket material around the OS1 9 125 singlemode fiber optic cable is a polyolefin halogen free flame retardant compound for OFNR safety rating. It is colored yellow to signify the fiber optic jumper cable is suitable for single mode high speed networking. The LC/ST patch cord is assembled with LC and ST connectors for a high density data center environment. This breakout cable can reduce bulk fiber optic cabling by 50% with a 2mm duplex round cord. Each assembly is 100% factory tested to meet Bellcore GR-326 and TIA/EIA standards with a maximum insertion loss at 0.2dB. The data center grade duplex LC and ST fiber connectors meet EIA/TIA 604-2 standards with ceramic ferrule. The ferrule on the end of the singlemode fiber cable is pre-polished for a consequently consistent performance. Operating temperature for this OS1 fiber is -20C to +70C and minimum bend radius is 1.18in. Nexhi LC-ST patch cable is RoHS compliant and complies with industry standards. Each fiber optic patch cord is factory built and tested. Test reports are included.
LC-ST Fiber Optic Patch Cord, Duplex, Multimode (OM1), Orange, 7 Meters
Nexhi offers an LC to ST fiber optic patch cord. The LC-ST patch cable is constructed with Corning MF-62.5 OM1 glass in AB to BA polarity to support laser optimized multimode fiber LOMMF and high speed cabling networks. The LC to ST fiber optic patch cable is OM1 62.5/125 duplex tight buffered. The orange jacket material around the OM1 62.5 125 multimode fiber optic cable is a polyolefin halogen free flame retardant compound for OFNR safety rating. It is colored orange to signify the fiber optic jumper cable is suitable for high speed networking. The LC/ST patch cord is assembled with LC and ST connectors for a high density data center environment. An LC duplex connector with beige housing and white boots is on one end, and two ST simplex connectors with black boots is on the other end.This breakout cable can reduce bulk fiber optic cabling by 50% with a 2mm duplex round cord. Each assembly is 100% factory tested to meet Bellcore GR-326 and TIA/EIA standards with a maximum insertion loss at 0.2dB. The data center grade duplex LC and ST fiber connectors meet EIA/TIA 604-2 standards with ceramic ferrule. The ferrule on the end of the multimode fiber cable is pre-polished for a consequently consistent performance. Operating temperature for this OM1 fiber is -20C to +70C and minimum bend radius is 1.18in. Nexhi LC-ST patch cable is RoHS compliant and complies with industry standards. Each fiber optic patch cord is factory built and tested. Test reports are included.
SC Fiber Optic Patch Cord, Duplex, Multimode (OM1), Orange, 2 Meters
Product Description
SC-SC 62.5/125 (OM1) Dupelx Multimode OFNR Fiber Optic Patch Cord - Orange
Product Features
Fully compatible with 62.5/125 multimode fiber applications.
Our OFNR Duplex 2.0mm cable with orange cable jacket and Duplex SC connector on both ends.
Factory terminated with individual test data.
Custom variations available.
Product Specifications
Connector Type: SC DUPLEX to SC DUPLEX
Fiber Type: 62.5/125 multimode
Jacket Color: Orange Jacket
Length: 1M - 30M
LC Fiber Optic Patch Cord, Duplex, Multimode (OM1), Orange, 1 Foot
Product Description
62.5/125 DUPLEX OFNR LC TO LC ORANGE
Rating: 62.5/125 Multimode
Wiring: Wired AB-BA
Color: Orange
Jacket: OFNR
Packaging: Individual pack
RoHS: Compliant
Product Features
Constructed with Corning® MF-62.5 glass for high performance multimode 62.5/125 applications.
Each assembly is 100% factory tested to meet Bellcore GR-326 standard with maximum insertion loss at 0.2dB.
Operating temperature is -20C to +70C and minimum bend radius is 1.18in.
Product Specifications
Cable is 62.5/125 duplex tight buffered.
Jacket material is PVC with OFNR safety rating.
Cable outer diameter is 1.8mm~2.0mm.
Connector meets EIA/TIA 604-2 standards with ceramic ferrule.
The ferrule is pre-polished for a consequently consistent performance.
Length: 1M to 30M
SC Fiber Optic Patch Cord, Duplex, Singlemode (OS1), Yellow, 6 Meters
Description: Singlemode Duplex OFNR SC To SC Yellow
Rating: 9/125 Singlemode
Wiring: Wired AB-BA
Color: Yellow
Jacket: OFNR
Packaging: Individual pack
RoHS: Compliant
Feature:
Constructed with Corning® SMF-28e+ glass for high performance singlemode applications. It is ITU-T G.652.D compliant and fully backward compatible. Each assembly is 100% factory tested to meet Bellcore GR-326 standard. Maximum insertion loss is 0.2dB and minimum return loss is -55dB. Operating temperature is -20C to +70C and minimum bend radius is 1.18in.
Specification:
Cable is singlemode duplex tight buffered. Jacket material is PVC with OFNR safety rating. Cable outer diameter is 1.8mm~2.0mm. Connector meets EIA/TIA 604-2 standards with ceramic ferrule. The ferrule is pre-polished for a consequently consistent performance
LC-SC Fiber Optic Patch Cord, Duplex, Multimode (OM2), Orange, 4 Meters
Nexhi offers an LC to ST fiber optic patch cord. The LC-ST patch cable is constructed with Corning MF-50 OM2 glass in AB to BA polarity to support laser optimized multimode fiber LOMMF and high speed cabling networks. The LC to ST fiber optic patch cable is OM2 50/125 duplex tight buffered. The orange jacket material around the OM2 50 125 multimode fiber optic cable is a polyolefin halogen free flame retardant compound for OFNR safety rating. It is colored orange to signify the fiber optic jumper cable is suitable for high speed networking. The LC-ST patch cord is assembled with LC and ST connectors for a high density data center environment. This breakout cable can reduce bulk fiber optic cabling by 50% with a 2mm duplex round cord. Each assembly is 100% factory tested to meet Bellcore GR-326 and TIA/EIA standards with a maximum insertion loss at 0.2dB. The data center grade duplex LC and ST fiber connectors meet EIA/TIA 604-2 standards with ceramic ferrule. The ferrule on the end of the multimode fiber cable is pre-polished for a consequently consistent performance. Operating temperature for this OM2 fiber is -20C to +70C and minimum bend radius is 1.18in. Nexhi LC-ST fiber patch cable is RoHS compliant and complies with industry standards. Each fiber optic patch cord is factory built and tested. Test reports are included.
SC-ST Fiber Optic Patch Cord, Duplex, Multimode (OM1), Orange, 2 Meters
Product Description
ST-SC 62.5/125 (OM1) Duplex Multimode OFNR Fiber Optic Patch Cord - Orange
Product Features
Fully compatible with 62.5/125 multimode fiber applications.
Our OFNR Duplex 2.0mm cable with orange cable jacket and Duplex ST connector to Duplex SC connector.
Factory terminated with individual test data.
Custom variations available.
Product Specifications
Connector Type: ST DUPLEX to SC DUPLEX
Fiber Type: 62.5/125 multimode
Jacket Color: Orange Jacket
Length: 1M - 30M
LC-SC Fiber Optic Patch Cord, Duplex, Multimode (OM1), Orange, 12 Meters
Nexhi offers an LC to SC fiber optic patch cord. The LC-SC patch cable is constructed with Corning MF-62.5 OM1 glass in AB to BA polarity to support laser optimized multimode fiber LOMMF and high speed cabling networks. The LC to SC fiber optic patch cable is OM1 62.5/125 duplex tight buffered. The orange jacket material around the OM1 62.5 125 multimode fiber optic cable is a polyolefin halogen free flame retardant compound for OFNR safety rating. It is colored orange to signify the fiber optic jumper cable is suitable for high speed networking. The LC/SC patch cord is assembled with LC and SC connectors for a high density data center environment. This breakout cable can reduce bulk fiber optic cabling by 50% with a 2mm duplex round cord. Each assembly is 100% factory tested to meet Bellcore GR-326 and TIA/EIA standards with a maximum insertion loss at 0.2dB. The data center grade duplex LC and SC fiber connectors meet EIA/TIA 604-2 standards with ceramic ferrule. The ferrule on the end of the multimode fiber cable is pre-polished for a consequently consistent performance. Operating temperature for this OM1 fiber is -20C to +70C and minimum bend radius is 1.18in. Nexhi LC-SC patch cable is RoHS compliant and complies with industry standards. Each fiber optic patch cord is factory built and tested. Test reports are included.
LC Fiber Optic Patch Cord, Duplex, Multimode (OM2), Orange, 4 Meters
Product Description
LC-LC 50/125 (OM2) Duplex Multimode OFNR Fiber Optic Patch Cord - Orange
Product Features
Constructed with Corning® MF-50 glass for high performance multimode 50/125 applications
Each assembly is 100% factory tested to meet Bellcore GR-326 standard with maximum insertion loss at 0.2dB.
Operating temperature is -20C to +70C and minimum bend radius is 1.18in.
Product Specifications
Cable is 50/125 duplex tight buffered with cable outer diameter of 1.8mm~2.0mm.
Jacket material is OFNR safety rating. OD: 1.8mm~2.0mm Connector meets EIA/TIA 604-2 standards with ceramic ferrule.
The ferrule is pre-polished for a consequently consistent performance.
Length: 1M - 50M
LC Fiber Optic Patch Cord, Duplex, Multimode (OM2), Orange, 3 Meters
Product Description
LC-LC 50/125 (OM2) Duplex Multimode OFNR Fiber Optic Patch Cord - Orange
Product Features
Constructed with Corning® MF-50 glass for high performance multimode 50/125 applications
Each assembly is 100% factory tested to meet Bellcore GR-326 standard with maximum insertion loss at 0.2dB.
Operating temperature is -20C to +70C and minimum bend radius is 1.18in.
Product Specifications
Cable is 50/125 duplex tight buffered with cable outer diameter of 1.8mm~2.0mm.
Jacket material is OFNR safety rating. OD: 1.8mm~2.0mm Connector meets EIA/TIA 604-2 standards with ceramic ferrule.
The ferrule is pre-polished for a consequently consistent performance.
Length: 1M - 50M
SC-ST Fiber Optic Patch Cord, Duplex, Singlemode (OS1), Yellow, 3 Meters
Product Description
ST-SC 9/125 (OS1) Duplex Singlemode OFNR Fiber Optic Patch Cord - Yellow
Rating: 9/125 Singlemode
Fiber Polarity: AB-BA
Color: Yellow
Jacket: OFNR
Packaging: Individual pack
RoHS: Compliant
Product Features
Fully compatible with 9/125 singlemode fiber applications.
Our OFNR Duplex 2.0mm cable with yellow cable jacket and Duplex ST connector to Duplex SC connector.
Factory terminated with individual test data.
Custom variations available.
Product Specifications
Connector Type: ST DUPLEX to SC DUPLEX
Fiber Type: 9/125 singlemode
Jacket Color: Yellow Jacket
Length: 1M - 10M
LC-SC Fiber Optic Patch Cord, Duplex, Multimode (OM1), Orange, 5 Meters
Product Description
SC-LC 62.5/125 (OM1) Duplex Multimode OFNR Fiber Optic Patch Cord - Orange
Product Features
Fully compatible with 62.5/125 multimode fiber applications.
Our OFNR Duplex 2.0mm cable with orange jacket and Duplex SC connector to Duplex LC connector.
Factory terminated with individual test data.
Custom variations available.
Product Specifications
Connector Type: SC DUPLEX to LC DUPLEX
Fiber Type: 62.5/125 Multimode
Jacket Color: Orange Jacket
Length: 1M - 30M
SC Fiber Optic Patch Cord, Duplex, Singlemode (OS1), Yellow, 2 Meters
Description: Singlemode Duplex OFNR SC To SC Yellow
Rating: 9/125 Singlemode
Wiring: Wired AB-BA
Color: Yellow
Jacket: OFNR
Packaging: Individual pack
RoHS: Compliant
Feature:
Constructed with Corning® SMF-28e+ glass for high performance singlemode applications. It is ITU-T G.652.D compliant and fully backward compatible. Each assembly is 100% factory tested to meet Bellcore GR-326 standard. Maximum insertion loss is 0.2dB and minimum return loss is -55dB. Operating temperature is -20C to +70C and minimum bend radius is 1.18in.
Specification:
Cable is singlemode duplex tight buffered. Jacket material is PVC with OFNR safety rating. Cable outer diameter is 1.8mm~2.0mm. Connector meets EIA/TIA 604-2 standards with ceramic ferrule. The ferrule is pre-polished for a consequently consistent performance
LC Fiber Optic Patch Cord, Plenum, Duplex, Multimode (OM2), Orange, 5 Meters
Nexhi offers an LC plenum fiber optic patch cord. The LC-LC patch cable is constructed with Corning MF-50 OM2 glass in AB to BA polarity to support laser optimized multimode fiber LOMMF and high speed cabling networks. The LC to LC plenum-rated fiber optic patch cable is OM2 50/125 duplex tight buffered. The orange jacket material around the OM2 50 125 multimode fiber optic cable is a polyolefin halogen free flame retardant compound for OFNP safety rating. It is colored orange to signify the fiber optic jumper cable is suitable for high speed networking. The LC patch cord is assembled with LC connectors for a high density data center environment. This breakout cable can reduce bulk fiber optic cabling by 50% with a 2mm duplex round cord. Each assembly is 100% factory tested to meet Bellcore GR-326 and TIA/EIA standard with a maximum insertion loss at 0.2dB. The data center grade duplex LC fiber connector meets EIA/TIA 604-2 standards with ceramic ferrule. The ferrule on the end of the multimode fiber cable is pre-polished for a consequently consistent performance. Operating temperature for this OM2 fiber is -20C to +70C and minimum bend radius is 1.18in. Nexhi LC patch cable is RoHS compliant and complies with industry standards. Each fiber optic patch cord is factory built and tested. Test reports are included.
ST Fiber Optic Patch Cord, Duplex, Singlemode (OS1), Yellow, 50 Meters
Nexhi offers an ST-ST fiber optic patch cord. The ST patch cable is constructed with Corning SMF-28 Ultra OS1 glass in AB to BA polarity to support high speed singlemode (SM) data transmissions. The ST fiber optic patch cable is OS1 9/125 duplex tight buffered. The yellow jacket material around the OS1 9 125 singlemode fiber optic cable is a polyolefin halogen free flame retardant compound for OFNR safety rating. It is colored yellow to signify the fiber optic jumper cable is suitable for single mode high speed networking. The ST/ST patch cord is assembled with ST connectors for a high density data center environment. This breakout cable can reduce bulk fiber optic cabling by 50% with a 2mm duplex round cord. Each assembly is 100% factory tested to meet Bellcore GR-326 and TIA/EIA standards with a maximum insertion loss at 0.2dB. The data center grade duplex ST fiber connector meets EIA/TIA 604-2 standards with ceramic ferrule. The ferrule on the end of the singlemode fiber cable is pre-polished for a consequently consistent performance. Operating temperature for this OS1 fiber is -20C to +70C and minimum bend radius is 1.18in. Nexhi ST patch cable is RoHS compliant and complies with industry standards. Each fiber optic patch cord is factory built and tested. Test reports are included.
SC Fiber Optic Patch Cord, Duplex, Multimode (OM1), Orange, 5 Meters
Product Description
SC-SC 62.5/125 (OM1) Dupelx Multimode OFNR Fiber Optic Patch Cord - Orange
Product Features
Fully compatible with 62.5/125 multimode fiber applications.
Our OFNR Duplex 2.0mm cable with orange cable jacket and Duplex SC connector on both ends.
Factory terminated with individual test data.
Custom variations available.
Product Specifications
Connector Type: SC DUPLEX to SC DUPLEX
Fiber Type: 62.5/125 multimode
Jacket Color: Orange Jacket
Length: 1M - 30M
MTP Fiber Optic Patch Cord, 40 Gb Multimode (OM3), Aqua, 8 Fibers, 5 Meters
Nexhi manufacturers data center grade fiber optic MTP patch cord. The MTP fiber optic patch cable is constructed with Corning® Clearcurve® OM3 glass. Multimode fiber optic cable comes with 40G Base-SR4 8-fiber configuration for direct equipment to equipment connection to support laser optimized multimode fiber LOMMF and high speed 10G and 40G cabling networks. The high density 8 fiber cable is OM3 50/125 with a 3.0mm diameter. These OM3 fiber jumper cables have a configuration of 50 125. The aqua jacket material is optical fiber nonconductive plenum OFNP and is colored aqua for 10Gb and 40Gb networking. The MTP-MTP fiber optic patch cord is assembled with MTP female connectors. The MTP connector uses a spring loaded sliding mechanism allowing the fiber patch cord to latch onto adapters providing a secure and reliable connection for network cabling in a data center environment. Each assembly is 100% factory tested to meet Bellcore GR-326 and TIA/EIA standard with maximum insertion loss at
SC-ST Fiber Optic Patch Cord, Duplex, Singlemode (OS1), Yellow, 7 Meters
Nexhi offers an SC-ST fiber optic patch cord. The SC-ST patch cable is constructed with Corning SMF-28 Ultra OS1 glass in AB to BA polarity to support high speed singlemode (SM) data transmissions. The SC/ST fiber optic patch cable is OS1 9/125 duplex tight buffered. The yellow jacket material around the OS1 9 125 singlemode fiber optic cable is a polyolefin halogen free flame retardant compound for OFNR safety rating. It is colored yellow to signify the fiber optic jumper cable is suitable for single mode high speed networking. The SC/ST patch cord is assembled with SC and ST connectors for a high density data center environment. An SC duplex connector with a blue coupling, boots and a clip is on one end, and two ST simplex connectors with yellow boots is on the other end.This breakout cable can reduce bulk fiber optic cabling by 50% with a 2mm duplex round cord. Each assembly is 100% factory tested to meet Bellcore GR-326 and TIA/EIA standards with a maximum insertion loss at 0.2dB. The data center grade duplex SC and ST fiber connectors meet EIA/TIA 604-2 standards with ceramic ferrule. The ferrule on the end of the singlemode fiber cable is pre-polished for a consequently consistent performance. Operating temperature for this OS1 fiber is -20C to +70C and minimum bend radius is 1.18in. Nexhi SC-ST patch cable is RoHS compliant and complies with industry standards. Each fiber optic patch cord is factory built and tested. Test reports are included.
LC Fiber Optic Patch Cord, Duplex, Singlemode (OS1), Yellow, 5 Meters
Product Description
LC-LC 9/125 (OS1) Duplex singlemode OFNR Fiber Optic Patch Cord - Yellow
Rating: 9/125 Singlemode
Fiber Polarity: AB-BA
Jacket: OFNR
Packaging: Individual pack
RoHS: Compliant
Product Features
Constructed with Corning® SMF-28e+ glass for high performance singlemode applications.
It is ITU-T G.652.D compliant and fully backward compatible.
Each assembly is 100% factory tested to meet Bellcore GR-326 standard.
Maximum insertion loss is 0.2dB and minimum return loss is -55dB.
Operating temperature is -20C to +70C and minimum bend radius is 1.18in.
Product Specifications
Cable is singlemode duplex tight buffered.
Jacket material is PVC with OFNR safety rating.
Cable outer diameter is 1.8mm~2.0mm.
Connector meets EIA/TIA 604-2 standards with ceramic ferrule.
LC Fiber Optic Patch Cord, Duplex, Multimode (OM1), Orange, 15 Meters
Product Description
62.5/125 DUPLEX OFNR LC TO LC ORANGE
Rating: 62.5/125 Multimode
Wiring: Wired AB-BA
Color: Orange
Jacket: OFNR
Packaging: Individual pack
RoHS: Compliant
Product Features
Constructed with Corning® MF-62.5 glass for high performance multimode 62.5/125 applications.
Each assembly is 100% factory tested to meet Bellcore GR-326 standard with maximum insertion loss at 0.2dB.
Operating temperature is -20C to +70C and minimum bend radius is 1.18in.
Product Specifications
Cable is 62.5/125 duplex tight buffered.
Jacket material is PVC with OFNR safety rating.
Cable outer diameter is 1.8mm~2.0mm.
Connector meets EIA/TIA 604-2 standards with ceramic ferrule.
The ferrule is pre-polished for a consequently consistent performance.
Length: 1M to 30M
ST Fiber Optic Patch Cord, Duplex, Singlemode (OS1), Yellow, 1 Meter
Product Description
Singlemode Duplex OFNR ST to ST Yellow
Rating: 9/125 Singlemode
Fiber Polarity: AB-BA
Color: Yellow
Jacket: OFNR
Packaging: Individual pack
RoHS: Compliant
Product Features
Constructed with Corning® SMF-28e+ glass for high performance singlemode applications.
ITU-T G.652.D compliant and fully backward compatible
Each assembly is 100% factory tested to meet Bellcore GR-326 standard.
Maximum insertion loss is 0.2dB and minimum return loss is -55dB. Operating temperature is -20C to +70C and minimum bend radius is 1.18in.
Product Specifications
Cable is singlemode duplex tight buffered. Jacket material is PVC with OFNR safety rating. Cable outer diameter is 1.8mm~2.0mm. Connector meets EIA/TIA 604-2 standards with ceramic ferrule. The ferrule is pre-polished for a consequently consistent performance.
Nexhi® C14/C19 14AWG SJT 15A/250V 4FT GREEN
C14/C19 14AWG SJT 15A/250V 4FT GREEN
Nexhi® POWER EXT. CORD,PC/MON., 6 ft. RED
POWER EXT. CORD,PC/MON., 6 ft. RED
Nexhi® POWER CORD NEMA 5-15P / IEC320 C13 , Black, 6 ft. W/PC, Red
POWER CORD NEMA 5-15P / IEC320 C13 , Black, 6 ft. W/PC, Red
NexhiTM POWER CORD NEMA 5-15P / IEC320 C13 , Black, 4 ft. W/PC, Green
POWER CORD NEMA 5-15P / IEC320 C13 , Black, 4 ft. W/PC, Green
Nexhi® POWER EXT. CORD,PC/MON., 3 ft. RED
POWER EXT. CORD,PC/MON., 3 ft. RED
Nexhi 1-port Wall Plate/hdmi faceplate/panel mount for Keystone Jack and Modular Inserts in Color Ivory- Pack of 5
The Nexhi UTP-3500-5PK -Position Face Plate (Ivory) is (1) port, (1) gang Face plates are perfect for networking your home or office. Our versatile Face plates accept any standard Keystone jack, allowing you to insert the jack that best fits your need.
Quick and easy to install
Without the need for too many tools, all you need is a standard screwdriver.
One plate fits any combination of Cat5 RJ45 and Cat3 RJ12 Jacks
Adds network versatility
Snap-In Keystone Jack Insert Compatible
RCA keystone jack connector
RG6 keystone jack connector gold-plated
Blank keystone jack insert to conceal the opening -white
Banana Plug speaker wire coupler
RG6 keystone jack connector nickel-plated
RJ45 keystone jack network patch cable coupler
HDMI keystone jack media cable coupler
90-degree Cat6A RJ45 keystone jacks
Nexhi® POWER CORD 14 AWG C14/C15 6FT BLUE- Nexhi TM
POWER CORD 14 AWG C14/C15 6FT BLUE
