Buy NTI Products online in United States

NTI E-S420MA-24V 4-20mA Sensor Converter w/2-Yr Warranty

NTI E-S420MA-24V 4-20mA Sensor Converter monitors 4-20mA sensors (up to two) when connected to an E-16D, E-5D or E-2D (SYSTEM). The 4-20mA sensors can be any ISA Type 2, ISA Type 3, and ISA Type 4 sensor. When connected to a SYSTEM via 18-24AWG CAT5/5e/6 cable (up to 500 feet away), the 4-20mA sensors can be monitored and the SYSTEM can be configured to alert users as to variations in the current levels NTI E-S420MA-24V 4-20mA Sensor Converter Features: External RJ45 device monitors up to two 4-20 mA analog sensors Supports ISA Type 2, ISA Type 3, and ISA Type 4 sensors Provides 24VDC, 25mA for each sensor Connector: Screw Terminal, 8-position. Supports CAT5/5e/6 cable up to 1,000 ft. (305 m) Includes Mounting Hardware

NTI E-SLDO-AP Spot Liquid Detector with Built-In Visual & Audible Alarm, Powered w/2-Yr Warranty

NTI E-SLDO-AP Spot Liquid Detector with Built-In Visual & Audible Alarm, Powered Features: Use to detect conductive fluids in confined areas Place the sensor on a flat surface under HVAC equipment, dishwashers, washing machines, refrigerators, compressors, or electrical switchgear rooms and other potential leakage areas. Water level detection range: 0.03 to 0.53" (0.79 to 13 mm). DPDT alarm contacts. Red LED for visual alarm signal. Green LED for power

NTI E-4GU-1 4G Modem & 4G LTE Bands USB Supported 1/2/4/5/7/28 w/2-Yr Warranty

NTI E-4GU-1 4G Modem & 4G LTE Bands USB Supported 1/2/4/5/7/28 Features: Sends SMS text messages to a pager or cell phone when a sensor goes out of range of a configurable threshold. SIM card supporting SMS messaging required (not included). Supports fourth generation (4G) digital cellular standards. USB 2.0 stick with Male USB Type A connector Two CRC-9 ports for external antennas (sold separately, part # E-ANT2-4GU). Use E-ANT2-4GU to increase the signal strength of the 4G network.

NTI ST-IPUSB4K-LCAU Low-Cost 4K HDMI USB KVM Extender Over IP, AS/NZS 3112 w/2-Yr Warranty

NTI ST-IPUSB4K-LCAU Low-Cost 4K HDMI USB KVM Extender Over IP, AS/NZS 3112 4K HDMI USB KVM Extender Over IP provides remote KVM (USB keyboard, USB mouse, and 4Kx2K HDMI monitor) access to a USB computer up to 328 feet (100 meters) over a Gigabit network using a single CAT6/6a/7 cable. Each Low-Cost 4K HDMI USB KVM Extender consists of a local unit that connects to an HDMI source and also supplies video to a local monitor, and a remote unit that connects to a keyboard, monitor and mouse. The local and remote units can be connected together for a Point-to-Point connection via CATx or a Point-to-Many connection via a network switch. Support for multiple transmitters requires a managed network switch. NTI ST-IPUSB4K-LCAU Low-Cost 4K HDMI USB KVM Extender Over IP, AS/NZS 3112 Features: Supports Ultra-HD 4Kx2K resolutions to 3840x2160 and 4096x2160 @30Hz YUV 4:4:4, and HDTV resolutions to 1080p @60Hz. Extend 4Kx2K up to 328 feet using CAT6/6a/7 cable. In a Point-to-Many or Many-to-Many connection, the max length between the switch and the local/remote unit is 164 feet. USB ports for keyboard and mouse. Keyboard and mouse are hot-pluggable. Plug-and-Play installation allows receivers to find the transmitter automatically on the same network. (Network configuration may be required for managed network switch for many-to-many connections.) When using multiple remote units, only one unit can have USB control over the source at any time. Built-in EDID table. HDMI features supported: HDMI 1.4 36-bit Deep Color Dolby, DTS, PCM, and LPCM YUV 4:4:4 Bandwidth up to 340 MHz (10.2 Gbps) HDCP 1.4 compliant. Easily expandable. Add remote as you add monitors.

NTI SE-15V-2-2U1C-TTL VGA Video Switch with TTL: 1 Computer Between 2 Monitors w/2-Yr Warranty

NTI SE-15V-2-2U1C-TTL VGA Video Switch with TTL: 1 Computer Between 2 Monitors enables up to 16 computers to be connected to a single video monitor, projector or LCD/plasma screen. NTI SE-15V-2-2U1C-TTL VGA Video Switch with TTL: 1 Computer Between 2 Monitors Features: Compatible with PCs, SUNs and MACs with VGA video. Supports resolutions up to 1920x1200. Eliminate redundant monitors. Ideal for classrooms and boardrooms. Interconnect NTI switches & splitters for complex applications. Available with audio and/or RS232 control options. Monitors and speakers are hot-pluggable. Rackmount kit included with the 4/8-port video-only models and the 4/8/16-port audio/video models. Optional rackmount case available for the 16-port video-only switch.

NTI ST-IPUSB4K-LCEU Low-Cost 4K HDMI USB KVM Extender Over IP, Europlug CEE 7/16 w/2-Yr Warranty

NTI ST-IPUSB4K-LCEU Low-Cost 4K HDMI USB KVM Extender Over IP, Europlug CEE 7/16 4K HDMI USB KVM Extender Over IP provides remote KVM (USB keyboard, USB mouse, and 4Kx2K HDMI monitor) access to a USB computer up to 328 feet (100 meters) over a Gigabit network using a single CAT6/6a/7 cable. Each Low-Cost 4K HDMI USB KVM Extender consists of a local unit that connects to an HDMI source and also supplies video to a local monitor, and a remote unit that connects to a keyboard, monitor and mouse. The local and remote units can be connected together for a Point-to-Point connection via CATx or a Point-to-Many connection via a network switch. Support for multiple transmitters requires a managed network switch. NTI ST-IPUSB4K-LCEU Low-Cost 4K HDMI USB KVM Extender Over IP, Europlug CEE 7/16 Features: Supports Ultra-HD 4Kx2K resolutions to 3840x2160 and 4096x2160 @30Hz YUV 4:4:4, and HDTV resolutions to 1080p @60Hz. Extend 4Kx2K up to 328 feet using CAT6/6a/7 cable. In a Point-to-Many or Many-to-Many connection, the max length between the switch and the local/remote unit is 164 feet. USB ports for keyboard and mouse. Keyboard and mouse are hot-pluggable. Plug-and-Play installation allows receivers to find the transmitter automatically on the same network. (Network configuration may be required for managed network switch for many-to-many connections.) When using multiple remote units, only one unit can have USB control over the source at any time. Built-in EDID table. HDMI features supported: HDMI 1.4 36-bit Deep Color Dolby, DTS, PCM, and LPCM YUV 4:4:4 Bandwidth up to 340 MHz (10.2 Gbps) HDCP 1.4 compliant. Easily expandable. Add remote as you add monitors.

NTI E-LLDC-10 Liquid Location Detection Sensor Cable, 10 feet w/2-Yr Warranty

NTI E-LLDC-10 Liquid Location Detection Sensor Cable, 10 feet Features: For detecting water presence at a specific location. 100% waterproof electronics. Detects any conductive liquid. Detects liquid depth >0.1" (2.5 mm). M12 4-pin connectors. Compatible with E-ALDS Addressable Leak Detection Sensor. Use self-adhesive clips (E-CLPxx-LD) to prevent sensor rope cable from shifting after installation

NTI E-STHSB-D Temperature/Humidity/Dew Point Sensor, DIN Mounted w/2-Yr Warranty

NTI E-STHSB-D Temperature/Humidity/Dew Point Sensor, DIN Mounted is a Temperature and Humidity sensor built into a large wall-mount LCD display with 2? character height for easy viewing from a distance. There are two key-hole slots on the back, 4-1/2? apart, for hanging the sensor on the wall. A template has been provided to make placement and hardware location easy. There are also two brackets (with screws) that can be mounted to the sides. These are provided for an alternate method of mounting. NTI E-STHSB-D Temperature/Humidity/Dew Point Sensor, DIN Mounted Features: Applications from -4 to 185 & #730;F (-20 to 85 & #730;C) and 0 to 90% relative humidity. High resistance to external influences on the cable due to digital output signal. Temperature accuracy: & #x000B1;0.90 & #730;F ( & #x000B1;0.50 & #730;C) for -4 to 14 & #730;F (-20 to -10 & #730;C). & #x000B1;0.72 & #730;F ( & #x000B1;0.40 & #730;C) for 14 to 185 & #730;F (-10 to 85 & #730;C). Humidity accuracy (at 86 & #730;F/30 & #730;C): 10 to 80% relative humidity, & #x000B1;3% 80 to 90% relative humidity, & #x000B1;4% Supports dew point measurement. RJ45 connector. Voltage Supply: 5VDC Current Consumption: 20mA Communication type: RS485 Data rate: 96kbps DIN mountable Supports CAT5/5e/6/6a cable (24 AWG) up to 1,000 ft (305 m) (not included). Powered by E-2D/5D/16D. Compatible with E-2D/5D/16D. E-2D: only compatible with Rev C units (features two power inputs). Not compatible with E-SEMS-16(U). Regulatory approvals: CE, RoHS Compatible with E-FSC Fiber Converter/Extender. Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.

NTI PCIE3-4K18GB-6VW 4K DisplayPort/HDMI PCIe Graphics Card, 6-Output w/2-Yr Warranty

NTI PCIE3-4K18GB-6VW 4K Display Port/HDMI PCIe Graphics Card, 6-Output drives six monitors from a single slot on a PC with resolutions up to 4096x2160 per output. It enables the user to create video walls up to 3x2. Additionally, it can be used as a video splitter. NTI PCIE3-4K18GB-6VW 4K Display Port/HDMI PCIe Graphics Card, 6-Output Features: Drive six displays from one single-slot PCIe 3.0 x16 graphics card. Six active mini Display Port outputs provide maximum AMD Eyefinity technology support. Independent resolutions, refresh rates, color controls, and video overlays. Supports resolutions up to Ultra-HD 4Kx2K 4:4: 4 (4096x2160@60Hz) per output. Create video wall configurations with displays in landscape or portrait orientations. Landscape (horizontal) orientation: AMD Eyefinity: 1x1, 1x2, 1x3, 1x5, 2x1, 2x2, 3x1, 3x2, 4x1, 5x1 Microsoft Windows: 1x1, 1x2, 1x3, 1x4, 1x5, 1x6, 2x1, 2x2, 2x3, 3x1, 3x2, 4x1, 5x1, 6x1 Portrait (vertical) orientation: AMD Eyefinity: 1x1, 1x2, 1x3, 1x5, 2x1, 2x2, 3x1, 5x1 Microsoft Windows: 1x1, 1x2, 1x3, 1x4, 1x5, 1x6, 2x1, 2x2, 2x3, 3x1, 3x2, 4x1, 5x1, 6x1 Versatile bezel compensation ability accommodates any screen frame width, and allows for accurate display of the image. Clone content to show the same information on all displays. 4GB of GDDR5 memory provides smooth video playback and graphics performance. Compliant with Display Port v 1.2 specifications. HDCP compliant. Any HDMI display can be connected by using the DPMM-HD4K18GBF adapter cable (not included). Ideal for a wide range of digital signage applications, including: retail stores, restaurants, corporate lobbies, entertainment venues, trade shows, airports, and more.

NTI VOPEX-HD4K9GB-16LC 16-Port Low-Cost 4K 9Gbps HDMI Video Splitter w/2-Yr Warranty

This NTI VOPEX-HD4K9GB-16LC 16-Port Low-Cost 4K 9Gbps HDMI Video Splitter simultaneously displays the same Ultra-HD 4Kx2K 30Hz image from one 9Gbps HDMI video source to 16 displays. NTI VOPEX-HD4K9GB-16LC 16-Port Low-Cost 4K 9Gbps HDMI Video Splitter Features: Supports Ultra-HD 4Kx2K resolutions (3840x2160 @30Hz) and HDTV resolutions to 1080p. HDMI features supported: HDMI 1.4 Dolby TrueHD, LPCM 7.1, DTS-HD Master Audio, and Dolby Digital+ 36-bit Deep Color Bandwidth up to 9 Gbps 3D HDCP compliant. Plug and play functionality - no new software or drivers required. Ideal for digital signage, tradeshows, or classrooms where high quality video on multiple displays is needed.

NTI unimux-hd4k-24 24-Port 4K HDMI USB KVM Switch

24-Port 4K HDMI USB KVM Switch The UNIMUX & trade; HDMI USB KVM Switch allows a user to control up to 32 Ultra-HD 4Kx2K 30Hz USB computers with one USB keyboard, USB mouse and 4K HDMI monitor. Dedicated internal microprocessors emulate keyboard and mouse presence to each attached CPU 100% of the time so all computers boot error-free. Features: Supports Ultra-HD 4Kx2K resolutions to 3840x2160 (30Hz), 2K resolution 2048x1080 (60Hz) and HDTV resolutions to 1080p (60Hz). Features NTI's patented true autoboot USB switching & ndash; all attached computers can be booted simultaneously. Compatible with USB computers (PC, SUN and MAC). Control the switch through the front panel buttons, keyboard commands, OSD, or RS232. Two transparent USB 2.0 ports (low/full/high speed), in addition to keyboard and mouse ports, for connecting USB devices such as printers, game controllers, USB flash drives, touch screen monitors, whiteboards, etc. High quality steel construction. Flash upgradeable. Rackmount kit included.

NTI ST-C6HD-394-LCAU Low-Cost HDMI Extender via one CAT5e/6, Extend up to 394 Feet, AS/NZS 3112 w/2-Yr Warranty

NTI ST-C6HD-394-LCAU Low-Cost HDMI Extender via one CAT5e/6, Extend up to 394 Feet, AS/NZS 3112 Power Cord Plug transmits digital video and audio signals up to 328 feet (100 meters) using one CAT5e cable or 394 feet (120 meters) using one CAT6 cable. Each video extender consists of a local unit that connects to an HDMI source and a remote unit that connects to an HDMI display. NTI ST-C6HD-394-LCAU Low-Cost HDMI Extender via one CAT5e/6, Extend up to 394 Feet, AS/NZS 3112 Power Cord Plug Features: Uncompressed signal transmission over a single CAT5e/6 cable. Using CAT5e cable, extend to 328 feet (100 meters). Using CAT6 cable, extend to 394 feet (120 meters). Supports HDTV resolutions to 1080p @60Hz, and up to 1680x1050 (WSXGA+). HDMI features supported: HDMI 1.3 Up to 24-bit Deep Color LPCM, Dolby Digital, and DTS. Bandwidth up to 340 MHz (10.2 Gbps) HDCP 1.4 compliant. Full Infrared Remote (IR) control of HDMI source from remote HDTV using existing source remote control. Plug-and-play functionality.

NTI DP8K-FOCMP-100M-MM 8K 100m DisplayPort Plenum Active Optical Cable w/2-Yr Warranty

NTI DP8K-FOCMP-100M-MM 8K DisplayPort 1.4 Plenum Active Optical Cable, 100 meters locates an Ultra-HD 8K 4320p 60Hz DisplayPort display up to 100 meters (328 feet) from a video source. Using optical fiber, the DP8K-FOCMP-xxM-MM provides high reliability DisplayPort signal transmission with zero signal loss in high noise environments. NTI DP8K-FOCMP-100M-MM 8K DisplayPort 1.4 Plenum Active Optical Cable, 100 meters Features: High speed and long distance transmission by optical system up to 100 meters (328 feet). Hybrid cable containing both fiber optic and copper cores. Supports resolutions up to Ultra-HD 8K (7680x4320) @60Hz, 4Kx2K (4096x2160 and 3840x2160) @120Hz, and HDTV 1080p @240Hz. No loss of signal - delivering crystal clear digital images instantly. No external power required. DisplayPort features supported: DisplayPort 1.4 Up to 16-bit Color and 48-bit Deep Color BT.2020, YCbCr 4:4:4, and YCbCr 4:2:2 High-bandwidth HBR3 Bandwidth up to 8.1Gbps per channel (32.4Gbps total) DSC 1.2 display stream compression FEC forward error correction HDR 32 audio channels. HDCP 2.2 compliant. Optical fibers immune to signal noise. Low RFI/EMI for sensitive applications. Supports Plug-n-Play specification. EDID learning for the support of any DisplayPort display device. Thin and ultra-lightweight construction. CMP-rated flame-retardant plenum PVC jacket. Ideal solution for many applications, including: Digital Signage Medical Imaging Equipment Airplane On-board Video System Home Theater TV Broadcast Station Conference Room Video Equipment

NTI SE-15V-2-2C1U VGA Video Switch: 2 Computers Between 1 Monitor w/2-Yr Warranty

NTI SE-15V-2-2C1U VGA Video Switch: 2 Computers Between 1 Monitor enables up to 16 computers to be connected to a single video monitor, projector or LCD/plasma screen. NTI SE-15V-2-2C1U VGA Video Switch: 2 Computers Between 1 Monitor Features: Compatible with PCs, SUNs and MACs with VGA video. Supports resolutions up to 1920x1200. Eliminate redundant monitors. Ideal for classrooms and boardrooms. Interconnect NTI switches & splitters for complex applications. Available with audio and/or RS232 control options. Monitors and speakers are hot-pluggable. Rackmount kit included with the 4/8-port video-only models and the 4/8/16-port audio/video models. Optional rackmount case available for the 16-port video-only switch.

NTI E-UCLD-400 Under Carpet Leak Detector, 400 ft w/2-Yr Warranty

NTI E-UCLD-400 Under Carpet Leak Detector, 400 ft for sensing the presence of water under carpeting or rugs in an environment where knowing moisture is present is desired. When connected to an ENVIROMUX-SEMS-16(U), ENVIROMUXMINI-LXO, ENVIROMUX-2D, ENVIROMUX-5D or ENVIROMUX-16D Enterprise Environment Monitoring System (SYSTEM) the sensor can be used to alert users as to the presence of water where it would otherwise be hidden NTI E-UCLD-400 Under Carpet Leak Detector, 400 ft Features: Use to detect conductive fluids and moisture under carpets. 100% waterproof electronics. Dimensions WxH: 1.75x0.06" (44.45x1.59 mm). Available 2-wire plenum cable lengths: 10/25/50/100/200/400/600/1000 feet. Regulatory approvals: RoHS.

NTI SE-15V-2-2C1U-TTL VGA Video Switch with TTL: 2 Computers Between 1 Monitor w/2-Yr Warranty

NTI SE-15V-2-2C1U-TTL VGA Video Switch with TTL: 2 Computers Between 1 Monitor enables up to 16 computers to be connected to a single video monitor, projector or LCD/plasma screen. NTI SE-15V-2-2C1U-TTL VGA Video Switch with TTL: 2 Computers Between 1 Monitor Features: Compatible with PCs, SUNs and MACs with VGA video. Supports resolutions up to 1920x1200. Eliminate redundant monitors. Ideal for classrooms and boardrooms. Interconnect NTI switches & splitters for complex applications. Available with audio and/or RS232 control options. Monitors and speakers are hot-pluggable. Rackmount kit included with the 4/8-port video-only models and the 4/8/16-port audio/video models. Optional rackmount case available for the 16-port video-only switch.

NTI E-ALDS Addressable Leak Detection Sensor w/2-Yr Warranty

NTI E-ALDS Addressable Leak Detection Sensor is an Addressable Leak Detection Sensor that will monitor and report the presence of liquid anywhere that the liquid detection sensing cable is placed. When connected to an E-16D/5D/2D (SYSTEM) with CAT5/5e/6/6a/7 (CATx) cable (minimum 24AWG) using one of the RJ45 Sensor ports, alerts can be sent to users indicat NTI E-ALDS Addressable Leak Detection Sensor Features: Monitors up to 4,000 feet of E-LDDC-x Liquid Location Detection Sensor Cable. Detects the specific location of liquid presence. If multiple leaks are occurring at the same time, you will receive notification of the location for the leak closest to E-ALDS. Once that leak is cleared, you will receive notification of the next leak closest to the E-ALDS. This will continue until all leaks are cleared. Detects if there is a break in the cable. Supports up to 1,000 feet of E-4WNSC-x non-sensing cable. Built-in Piezo buzzer emits loud beeps to alert personnel. Output level: 70dB at 1 foot Max current consumption: 13mA @ 5VDC, 18mA@12VDC Powered by E-2D/5D/16D. Compatible with E-2D/5D/16D. Interfaces with the E-2D/5D/16D via the RJ45 sensor port Extend up to 500 feet from the E-2D/5D/16D M12 4-pin connector for connecting E-LDDC-x Liquid Location Detection Sensor Cable or E-4WNSC-x Non-Sensing Cable Integrated mounting brackets for easy surface/wall mounting. Use the included terminator at the end of the E-LDDC-x Liquid Location Detection Sensor Cable If the terminator is not used, the system will register a cable break.

NTI E-SLDO-A Spot Liquid Detector with Built-In Visual & Audible Alarm w/2-Yr Warranty

NTI E-SLDO-A Spot Liquid Detector with Built-In Visual & Audible Alarm Features: Use to detect conductive fluids in confined areas Place the sensor on a flat surface under HVAC equipment, dishwashers, washing machines, refrigerators, compressors, or electrical switchgear rooms and other potential leakage areas. Water level detection range: 0.03 to 0.53" (0.79 to 13 mm). DPDT alarm contacts. Red LED for visual alarm signal. Green LED for power

NTI ST-C6USB4K18GB-HDBT 4K 18Gbps HDMI USB KVM Extender over HDBase-T w/2-Yr Warranty

NTI ST-C6USB4K18GB-HDBT 4K 18Gbps HDMI USB KVM Extender over HDBase-T with RS232 to 328 Feet transmits uncompressed digital Ultra-HD 4Kx2K 60Hz 4:4:4 HDMI signal, USB, IR, RS232, and power up to 328 feet over a single CATx cable using HDBase-T technology. Each extender consists of a local unit that connects to a computer and provides local keyboard, monitor and mouse connections; and a remote unit that connects to a keyboard, monitor and mouse. NTI ST-C6USB4K18GB-HDBT 4K 18Gbps HDMI USB KVM Extender over HDBase-T with RS232 to 328 Feet Features: Transmits an uncompressed high speed HDMI signal over one CAT6/6a/7 cable. Supports resolutions up to Ultra-HD 4Kx2K (3840x2160 and 4096x2160 @24/30/60Hz YUV 4:4:4). Extend a 4Kx2K signal up to 328 feet (100 meters) with solid CAT6/6a/7 cable. Extend a 1080p signal up to 492 feet (150 meters) with solid CAT6/6a/7 cable. HDMI features supported: HDMI 2.0 Up to 36-bit Deep Color RGB, YUV 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 Dolby TrueHD, DTS-HD Master Audio, Dolby Digital, Dolby Digital+, Dolby Atmos, Dolby Digital 2/5.1CH, LPCM 2/5.1/7.1CH, LPCM 2CH, LPCM 5.1, DTS 5.1, DTS:X, and DTS 2/5.1CH. Bandwidth up to 600 MHz (18 Gbps) Support for CEC (consumer electronic control) compatible devices. HDR10 HDCP 2.2 and 1.4 compliant. Local unit provides local KVM access. Bi-directional Infrared Remote (IR) control of HDMI source or display. IR transport channel can be forward or backward per the installation. Supports full-duplex RS232 up to 115200 baud. USB ports for keyboard and mouse. Keyboard and mouse are hot-pluggable. Only one power supply is necessary to power both the local and remote units. Use the DIP switch on the receiver to extract the digital HDMI audio signal and convert it to 2-channel analog stereo audio or multi-channel SPDIF digital audio.

NTI DP8K-FOCMP-20M-MM 8K 20m DisplayPort Plenum Active Optical Cable w/2-Yr Warranty

NTI DP8K-FOCMP-20M-MM 8K DisplayPort 1.4 Plenum Active Optical Cable, 20 meters locates an Ultra-HD 8K 4320p 60Hz DisplayPort display up to 100 meters (328 feet) from a video source. Using optical fiber, the DP8K-FOCMP-xxM-MM provides high reliability DisplayPort signal transmission with zero signal loss in high noise environments. NTI DP8K-FOCMP-20M-MM 8K DisplayPort 1.4 Plenum Active Optical Cable, 20 meters Features: High speed and long distance transmission by optical system up to 20 meters (328 feet). Hybrid cable containing both fiber optic and copper cores. Supports resolutions up to Ultra-HD 8K (7680x4320) @60Hz, 4Kx2K (4096x2160 and 3840x2160) @120Hz, and HDTV 1080p @240Hz. No loss of signal - delivering crystal clear digital images instantly. No external power required. DisplayPort features supported: DisplayPort 1.4 Up to 16-bit Color and 48-bit Deep Color BT.2020, YCbCr 4:4:4, and YCbCr 4:2:2 High-bandwidth HBR3 Bandwidth up to 8.1Gbps per channel (32.4Gbps total) DSC 1.2 display stream compression FEC forward error correction HDR 32 audio channels. HDCP 2.2 compliant. Optical fibers immune to signal noise. Low RFI/EMI for sensitive applications. Supports Plug-n-Play specification. EDID learning for the support of any DisplayPort display device. Thin and ultra-lightweight construction. CMP-rated flame-retardant plenum PVC jacket. Ideal solution for many applications, including: Digital Signage Medical Imaging Equipment Airplane On-board Video System Home Theater TV Broadcast Station Conference Room Video Equipment

NTI E-LDS50-5 Legacy Liquid Detection Rope Sensor w/2-Yr Warranty

NTI E-LDS50-5 Legacy Liquid Detection Rope Sensor - Length of water sensor cable - 50 ft. Length of 2-wire cable - 5 ft. Features: For detecting the presence of chemical liquid. Reliably senses acids, bases, and other conductive liquids. Detects liquid depth >0.1" (2.5 mm). Minimum puddle: 0.6" (15 mm) diameter. Chemical resistant - cable functions normally after seven-day exposure to: Fresh deionized water Tap water Sulfuric acid, H2SO4 (98%) Sulfuric acid, H2SO4 (50%) Hydrochloric acid, HCl (37%) Sodium hydroxide, NaOH (10%) Aqua regia, HNO3+3 HCl Ethylene glycol, C2H6O2 (60% in DI water) Voltage and current: Open Circuit: 5VDC max @ 1µA. Closed circuit: