Buy On Stage Products online in United States

Sort by
On-Stage 12" Speaker Bag
The On-Stage SB1200 12" Speaker Bag, complete with reinforced undercarriage, cushioned interior and heavy duty, woven nylon exterior with corded piping, takes the protection and appearance of almost any 12" speaker more than seriously. Ergonomics and swift deployment being equally important, durable, EVA padded hand straps make for an all but effortless lift, while heavy gauge dual zippers with oversize tabs provide convenient center access. And with 21 1/2" long roadworthy, hook and loop side pockets, every cable and accessory you could possibly need is there at your fingertips/all part of the package. Ideally sized at 24.5" x 14.5" x 15" to fit most 12" speakers Durable hand straps with EVA padded handle for durable transport Reinforced undercarriage, soft padded interior, heavy-duty woven nylon exterior with corded piping 21 1/2" Side Pocket for cables and accessories Heavy-gauge dual zippers for ideal center access This product can expose you to chemicals which is [are] known to the State of California to cause cancer or birth defects or other reproductive harm.For more information go to www.P65Warnings.ca.gov.
On-Stage
On-Stage 12" Speaker Bag
On Stage KT7800+ Keyboard Bench
With the 7800+, On-Stage Stands has produced a top-of-the line keyboard bench with quality that's hard to match. The deluxe design combines a 3" cushion which provides deluxe comfort for hours of play. A spring loaded double dead-bolt locking mechanism keeps the bench at your desired height with complete peace-of-mind.
On-Stage
On Stage KT7800+ Keyboard Bench
On-Stage MS7311B Kick Drum/Amp Mic Stand
& bull; 58" end with 27 solid threads and steel counterweight on this 9" boom & bull; All-metal boom clutch & bull; Heavy-duty sand-cast tripod base adds stability & bull; Die-cast steel height adjustment clutch.The heavy-casted tripod base gives this boom microphone stand the stability of a larger stand, yet the shape adds the convenience of being compact.
On-Stage
On-Stage MS7311B Kick Drum/Amp Mic Stand
On-Stage ABY Switcher
Dimensions (Overall): 4.8 inches (L), 2.2 inches (H) x 2.2 inches (W) x 4.8 inches (D)Weight: .3 poundsEffect Type: Multiple EffectsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Splits one input for switching between two signal paths, or combines two inputs to share one signal path & bull; True-bypass circuitry removes the pedal from the signal path when the pedal is off & bull; Heavy-duty aluminum housing protects the internal components to ensure reliable performance & bull; Nonslip rubber on the pedal bottom prevents skidding when using the switchThe GSP1000 ABY Switcher gives musicians a choice of two-input/one-output or one-input/two-output configurations. This pedal excels at several applications including running one instrument to two amps in stereo, switching between two amps, plugging two instruments into one effect chain, or bypassing effects. Its true-bypass circuitry completely removes the pedal from the signal path when the pedal is turned off. The heavy-duty housing with nonslip rubber base ensures reliable performance.
On-Stage
On-Stage ABY Switcher
On-Stage GA150 Guitar Humidifier
Dimensions (Overall): 7.1 inches (L), 1.3 inches (H) x 5.0 inches (W)Weight: .1 poundsPackage Quantity: 1Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, Changes in humidity can wreak havoc with even the most sturdily-built instrument, shortening its life and compromising sonic fidelity, particularly on the road. The GA150 Guitar Humidifier is a cost-effective investment in instrument's looks, longevity and, of course, sound. The GA150 can be stored conveniently and unobtrusively by suspending it between strings in the sound hole. The sponge-style humidifiers dispense moisture evenly without ever contacting the instrument itself, ensuring it looks and sounds as good as the day bought it.
On-Stage
On-Stage GA150 Guitar Humidifier
On-Stage MY500 Stereo Microphone Bar
Dimensions (Overall): 6.5 inches (L), 1.5 inches (H) x 2.5 inches (W)Weight: .48 poundsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Ideal for multiple mic applications in both live and studio recording settings; Holds up to three microphones & bull; Features a 58"-27 female threaded insert and two 58"-27 threaded knobs equally spaced from center & bull; Standard 58"-27 threaded ends will fit most standard mic clips, goosenecks and booms & bull; 95º tilt on either side creates versatilityThe On-Stage Stands MY500 stereo mic attachment bar holds up to three microphones. The MY500 is ideal for multiple mic applications in both live and studio recording settings. Fits most standard stands, booms and mic clips. It features brass 5/8"-27 insert threads.Founded on a promise of affordability, durability and innovation, On-Stage Stands products are used every day in studios, showrooms and on stages everywhere. Today, professionals and amateurs all over the world put their trust in On-Stage Stands.
On-Stage
On-Stage MY500 Stereo Microphone Bar
On-Stage MIX400 Mixer Stand
The MIX-400 is much more than a mixer stand; it & apos; s the ideal place for the most sophisticated equipment! It & apos; s amazing strength portability and versatility make it the perfect choice for pro-audio users. The rubberized support arm protects and grips gear, while the heavy-duty base with casters is completely adjustable! The entire unit breaks down into 3 pieces for strage and transportation. Features: & bull; & nbsp; & nbsp; Applications: Small mixers, autolocators, digital audio & bull; & nbsp; & nbsp; workstations, drum machines, samplers, laptop computers. & bull; & nbsp; & nbsp; Weight Capacity: 88 lbs. & bull; & nbsp; & nbsp; Height Adj.: 28”-38” & bull; & nbsp; & nbsp; Platform Width Adj.: 14.5 ”- 21.5 ” & bull; & nbsp; & nbsp; Platform Depth Adj.: 12”- 15.5 ” & bull; & nbsp; & nbsp; Base Spread: 23” & bull; & nbsp; & nbsp; Construction: Steel and plastic & bull; & nbsp; & nbsp; Color: Black Powder Coat Finish
On-Stage
On-Stage MIX400 Mixer Stand
On-Stage Speaker/Lighting Stand Skirt, White
Dimensions (Overall): 7.25 inches (L), 4.0 inches (H) x 4.75 inches (W)Weight: 1.05 poundsHolds up to: 1.05 poundsElectronics Condition: NewWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, Give speaker or lighting stand stand a clean look by hiding cables, cords and bulky tripod legs. The SSA100W is made of a stretchable fabric that fits neatly around two sides of a standard tripod speaker stand. The resulting elegant look is perfect for weddings, corporate events, and other productions where an upscale aesthetic is desired. Because the third side remains open, there is easy access and plenty of room for cables and storage of gear. The SSA100W even has its own built-in carry bag for easy and carefree transport and storage. What’s more, the fabric has been treated for flame resistance, and it can maintain flame resistance for up to 30 washings.
On-Stage
On-Stage Speaker/Lighting Stand Skirt, White
On-Stage KS7350 Keyboard Stand
Dimensions (Overall): 27.5 inches (L), 4.0 inches (H) x 14.5 inches (W)Weight: 18.15 poundsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Z-frame allows playing from either side and can be broken down and locked together for transport & bull; Easy height adjustments with line-it-up positions & bull; Center box beam provides extra reinforcement and allows for width adjustmentThink VERSATILITY! Only this compact, all-new stand can hold 375lb., allow for independent height and width adjustments, and fold for easy storage. The unique Z-frame allows playing from either side and can be broken down and locked together for transport. This model can hold 55-key keyboards in the compact position and up to 88-key keyboards at its maximum width.
On-Stage
On-Stage KS7350 Keyboard Stand
On Stage Hickory 2B Nylon Tip Drumsticks 12 Pairs + On Stage Clamp-On Drum Stick Holder + On Stage Chrome Plated Drum Tuning Key
To play with lightning speed you need sticks that are stronger, straighter and last longer... And, we found wood deep in the forests of China that is perfect for just that. On-Stage Sticks have been logged, air kiln dried, shaped, sanded and sealed and are ready to make some thunder. We carry hickory wood sticks and maple wood sticks and we also offer nylon or wood tips in a variety of different sizes. Available in bricks of 12 pairs of sticks.
On Stage
On Stage Hickory 2B Nylon Tip Drumsticks 12 Pairs + On Stage Clamp-On Drum Stick Holder + On Stage Chrome Plated Drum Tuning Key
On-Stage Percussion Table
The On-Stage DPT5500B Percussion Table, complete with EVA-padded, gear-securing surface, makes the ideal platform for all your percussion instruments and accessories, including laptops and electronics. The aluminum tripod base with non-slip rubber feet supports up to 25 lb. of gear, while the 18.5" x 18.5" ( 2.4 square ft. ) platform tilts from 0 to 90º for easy access. Height adjustable from 27.5 to 40.5", the DTP5000B also features folding legs for smooth transportation with black powder-coated finish for spotlight ready presentation.
On-Stage
On-Stage Percussion Table
On-Stage KS100 Keyboard Stand
Dimensions (Overall): 40.6 inches (L), 3.65 inches (H) x 19.5 inches (W)Weight: 6.95 poundsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 5-position disk clutch with bullet nose pull knob & bull; 1 x 1"tubing & bull; 90 lb. capacity & bull; Bolted together & bull; Non-slip rubber caps on all ends for stabilityThe KS100 keyboard stand from On-Stage Designs can be adjusted from 27" to 38", providing a wide range of heights for a wide variety of players. This X-style stand has 1 x 1" tubing that is bolted together, and for a secure adjustment, it utilizes a 5-position disk clutch with nose-pull knob. Able to hold up to a 90 lb. keyboard, it has non-slip rubber caps both where the keyboard rests and on the bottom to keep instrument in place while play.
On-Stage
On-Stage KS100 Keyboard Stand
On-Stage ASVS6R3 Isolation Filter
Dimensions (Overall): 9.5 inches (L), 1.3 inches (H) x 8.0 inches (W)Weight: .31 poundsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, These specially designed 6” diameter micro-weave nylon filters diffuse annoying vocal bursts, without altering the natural sound of the voice. The surface is also unprinted for consistent filtering. The ASVS6R3 pack of three replacement filters to be used with ASVSR6GB Pop Blocker is a great way to protect against germs between mic users.
On-Stage
On-Stage ASVS6R3 Isolation Filter
On-Stage 20' Microphone Cable
These 20 & #39; Lo-Z microphone cable have male XLR to Female XLR connectors, are flexible, durable and have a black jacket. All metal connectors ensure numberous uses without a problem. & nbsp; FeatureHeavy Duty 7mm Rubber Outer JacketWire Gauge: & nbsp; 24awg20’ LengthMetal XLR Connectors: & nbsp; Male to FemaleSam Ash and On-Stage has teamed up to offer you an exclusive deal on a reliable product. Get yours today, only from Sam Ash Direct.
On-Stage
On-Stage 20' Microphone Cable
On-Stage USB Single Head Clip Light
Dimensions (Overall): 9.25 inches (L), 2.5 inches (H) x 6.1 inches (W)Weight: .48 poundsHolds up to: .48 poundsElectronics Condition: NewWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, The On-Stage LED2214 Single Head USB Rechargeable Clip-on Sheet Music Light provides 25 full hours of high-intensity LED illumination, charges in under six hours and clips securely to almost any surface imaginable. Lithium-ion battery-powered, the LED2214 deploys 4 high-intensity LEDs, changeable from white to red, in a single lamp head attached to a sleek, strong, flexible gooseneck for easy positioning at any angle. And with an innovative, highly adaptive clip that attaches to music stands, desktops, tables and more, the LED2214 performs brilliantly in any environment.
On-Stage
On-Stage USB Single Head Clip Light
On-Stage 7201B Microphone Stand
An industry standard! The 7lb. sand-cast base is sturdy enough for road abuse yet light enough to carry. This black powder coat stand sports a die-cast zinc clutch. Features: Adjustable from 33"-60"7-lb base weight10" base diameterBlack finish
On-Stage
On-Stage 7201B Microphone Stand
On-Stage Tablet/Smart Phone Holder Black
& bull; Accommodates vast array of tablet sizes including iPad Pro and Microsoft Surface & bull; Lightweight, less than 1 lb, yet made of strong, durable plastic with soft protective padding at contact points & bull; Assembly adapter allows holder 180 degree tilt and 360 degree rotation & bull; Includes adjustable batterycell phone holderThe On-Stage TCM1500 delivers ergonomic, in-performance access to tablet or cell phone. Weighing less than one pound, it's constructed of durable, lightweight plastic for easy transportation that holds up. The design offers a world of attachment and orientation options for perfect adjustment. The tablet and cell holders each of boast protective padding at all contact points. The tablet adjusts from 8" - 12" in height to 3.5" in width, and the cell holders are 2.5" in height by 4" width. Meanwhile, the assembly adapter provides 180 degrees of tilt with a full 360 degree rotation and accepts any standard 5/8"-27 threaded mic stand, or, with the included clamp, attaches directly to any 0.75" to 1" stand or desktop.
On-Stage
On-Stage Tablet/Smart Phone Holder Black
On-Stage Hanging Speaker Bracket
The all-steel On-Stage SS7990 Speaker Wall Mount provides 180 degrees of steering and comes complete with multiple tie points for tilting options, mounting hardware and instructions.
On-Stage
On-Stage Hanging Speaker Bracket
On-Stage Classic Speaker Stand Black
Dimensions (Overall): 46.25 inches (L), 4.25 inches (H) x 5.5 inches (W)Weight: 8.05 poundsHolds up to: 8.05 poundsElectronics Condition: NewWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Applications: mid-sized speakers & bull; Upper shaft tubing: 1-38" & bull; Weight capacity: 160 lb. & bull; Height adjustment: 44-80" & bull; Base spread: 32-48"Crafted from steel and aluminum, the On-Stage Stands Classic Speaker Stand is affordable, lightweight, and durable. Use either the 1-3/8" diameter upper shaft or the included 1-1/2" adapter sleeve for a universal fit. The stand can support mid-sized speakers weighing up to 160 pounds. A tension height adjustment knob and a locking pin add safety to to the speaker stand's functionality.
On-Stage
On-Stage Classic Speaker Stand Black
On-Stage KB50 Keyboard Bench
This Three-Position X-Style bench is both affordable and perfect for fold-and-go use. It folds flat for ease of travel and has three simple line-it-up adjustments. Its all-purpose appeal make it a no-brainer for those looking to buy a basic bench for gigs, the studio or for home. Weight Capacity: 375 lbs. Folds flat for travelThree easy line-it-up adjustmentsNon-slip rubber end capsCushion Thickness: 2”Bench Seat Size: 12” x 17”Height in center position: 20” 0.75" x 1.5" Rectangular tubing for strength and stabilityConstruction: All-weldedSam Ash and On Stage Stands have teamed up to offer you an exclusive deal on a reliable product. Get yours today, only from Sam Ash Music. ??WARNING: Cancer and Reproductive Harm - www. P65Warnings. ca. gov
On-Stage
On-Stage KB50 Keyboard Bench
On-Stage Heavy Duty Low Profile Mic Stand with 12" Base
Save BIG when buy today!
On-Stage
On-Stage Heavy Duty Low Profile Mic Stand with 12" Base
On-Stage KT7800+ Keyboard Bench
Dimensions (Overall): 27.25 inches (L), 5.25 inches (H) x 15.0 inches (W)Weight: 15.0 poundsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Weight Capacity: 360 lbs & bull; Cushion Padding Thickness: 3" & bull; Bench Seat Size: 12.5" x 23.5" & bull; Height in center position 20" & bull; All-welded constructionWith the 7800+, On-Stage Stands has produced a top-of-the line keyboard bench with quality that's hard to match. The deluxe design combines a 3" cushion which provides deluxe comfort for hours of play. A spring loaded double dead-bolt locking mechanism keeps the bench at desired height with complete peace-of-mind.
On-Stage
On-Stage KT7800+ Keyboard Bench
On-Stage Microphone Stand Cup Holder Black Universal Clamp
Dimensions (Overall): 8.5 inches (L), 3.0 inches (H) x 7.0 inches (W)Weight: .45 poundsHolds up to: .45 poundsElectronics Condition: NewWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Friction locking knob secures nylon tipped screw to mic stand or boom. & bull; Soft Neoprene rubber keeps r drink hotcold and also prevents condensation from drippingWith the Musicians Gear Microphone Stand Cup Holder 'll never knock a drink onto gear or kick it over on the floor again. This clamp-on drink holder keeps drink safe and within easy reach while perform. The attachment piece fits most standard mic stands and booms. The interior is lined with Neoprene rubber to keep drinks hot or cold. Added bonus: the lining prevents beverage condensation from dripping on equipment.
On-Stage
On-Stage Microphone Stand Cup Holder Black Universal Clamp
On-Stage UTC2200 Utility Cart
The UTC2200 Utility Cart is practically a necessity for musicians on the move. Weighing a mere 28.7 pounds, it holds up to 485 pounds of equipment and is easily adjustable to whatever size gear ’re hauling. The 4” front casters turn with smooth precision in any direction and can be locked when standing still. Its 8” rear wheels are built to handle punishment - they both resist wear and have a unique texture that keeps moving.When need to move the cart from place to place, it conveniently folds up for compact storage. The ultra-convenient UTC2200 makes hauling gear the last thing need to worry about.
On-Stage
On-Stage UTC2200 Utility Cart
On-Stage On-Stage Deluxe Piano Bench with Storage Compartment
Dimensions (Overall): 32.5 inches (L), 5.5 inches (H) x 16.5 inches (W)Weight: 20.64 poundsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Height: 19.5”Weight Capacity: 240 lb & bull; Bench Seat Size: 13.5” x 29.5” & bull; Cushion Thickness: 1” & bull; Materials: Wood and Vinyl & bull; Color: Black %3CpA beautiful black satin finish and smooth soft vinyl give this affordable bench a classic look. The hinged cushioned seat lifts to reveal a large compartment for sheet music, metronomes, and accessories. Interior lining protects contents and prevents them from shifting. A locking arm holds the bench open to make storing or removing items easy. Solid wood legs and 1” padding provide a strong, comfortable, and steady base.
On-Stage
On-Stage On-Stage Deluxe Piano Bench with Storage Compartment
On-Stage Stands RS4000 Folding Amp Stand (Small - 100lbs Max) RS4000 ON-STAGE
Enhance your guitar tone and hear yourself better at the same time, with the On-Stage Stands RS4000 combo amplifier stand. Whether you play guitar, bass, or keyboard, you can't cheat physics - if your amplifier is sitting right on the floor or stage, you're losing tone. Sound vibrations get transferred to the surface your amplifier is sitting on, deadening your sound. Put your combo amplifier on the RS4000 amp stand, and you'll notice a subtle but significant tightening of low frequencies, as well as a more focused sound. And the tiltback design angles your amp towards your ears, helping you hear yourself better at gigs. So elevate your amplifier with the RS4000 combo amp stand - you'll hear the difference.On-Stage Stands RS4000 Combo Amplifier Stand Features at a Glance:Tiltback stand for medium to large combo amplifiers, with an easily transportable folding designBy de-coupling your amp from the floor or stage, your tone will become more focused with a tightening of low-frequency responseWeight capacity up to 100 lbs., plenty for small- and medium-size combo ampsRugged 3/4" steel tube construction, finished with a black powdercoatUpper-back arm length: 14"Lower arm length: 8"Footprint: 12" x 8"Get the maximum tone out of your guitar, bass, or keyboard combo amplifier with the On-Stage Stands RS4000 tiltback combo amplifier stand!FeaturesFoldable Tiltback Amp StandA Smart Way to Care for Your Amp - and Improve Tone! Stand Amp Small - 100lbs MaxFoldable Stand for Guitar, Bass, and Keyboard Combo Amplifiers, with 100 lbs. Capacity, Steel Tube C
On-Stage
On-Stage Stands RS4000 Folding Amp Stand (Small - 100lbs Max) RS4000 ON-STAGE
On-Stage Pro Studio Headphones
& bull; Type & bull; Ear coupling: Over-ear (circumaural) & bull; Primary application: Studio monitor & bull; Secondary application: General listening & bull; Operating principle: ClosedDesigned for home or studio recording, these headphones offer unparalleled sonic clarity and high-end features. The closed-ear, foam-padded WH4500 headphones comfortably block out ambient noise so can hear music more clearly. Collapsible and easily transported with the included nylon travel bag, the WH45000 provides a full-range frequency response, thanks to its 40mm drivers.
On-Stage
On-Stage Pro Studio Headphones
On-Stage MY700 Mic Bar
Dimensions (Overall): 12.1 inches (L), 1.2 inches (H) x 4.0 inches (W)Weight: 1.1 poundsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, Holds up to 6 microphones. 5/8"- 27 threaded knobs. Can be angled from 0-to-45. Ideal for multiple microphone applications.
On-Stage
On-Stage MY700 Mic Bar
On-Stage Trombone Stand
Dimensions (Overall): 24.1 inches (L), 4.3 inches (H) x 4.3 inches (W)Weight: 2.48 poundsCompatible With: TromboneWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, For those occasions that merit a trombone stand, choose the On-Stage Stands Trombone Stand. This stand securely supports trombone for performances and other occasions. Easily transportable, let the On-Stage Stands Trombone Stand hold instrument for an optimal performance experience.
On-Stage
On-Stage Trombone Stand
On-Stage Airlift Speaker Sub Pole
Dimensions (Overall): 36.75 inches (L), 2.5 inches (H) x 4.15 inches (W)Weight: 7.26 poundsHolds up to: 7.26 poundsElectronics Condition: NewWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Application: Subwoofer Shaft With 1 38" & bull; Length: 36.5" - 60" & bull; Upper Shaft Diameter: 1 38" & bull; Lower Shaft: Fits 1 38" Subwoofer Cups & Also Includes A Removable M20 & bull; Weight Capacity: 100 lbs.Designed for easy, efficient one man operation, the On-Stage SS7748 Subwoofer Shaft with Lift Assist delivers universal subwoofer application with a first-to-market removable M20 lug in addition to standard 1 â " cup fitting. Providing 45 lb. of internal gas cylinder pneumatic lift assist and a 100 lb. weight capacity, the SS7748 features all steel shafts that telescope from 36.5" to 60" while employing a secure knob. The lower shaft has an M20 threaded lug for stability that can be removed to fit all 1 3/8" cups.
On-Stage
On-Stage Airlift Speaker Sub Pole
On-Stage Expression Pedal
Dimensions (Overall): 10.0 inches (L), 2.6 inches (H) x 4.8 inches (W) x 10.0 inches (D)Weight: 1.33 poundsEffect Type: Volume and ExpressionWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Textured slip-resistant rubber surface & bull; Built in 6 ft ¼" TRS cable & bull; Adjustment knob allows to fine tune to expression range & bull; Polarity switch on underside allows the KEP100 to work with most keyboards and synthesizersThe KEP100, as durable as it is versatile, offers everything expect in an expression pedal. Designed to work with virtually any keyboard or synthesizer, electronic features include a polarity switch for instrument accommodation, a 6' attached 1/4" TRS cable for easy interface, and a scalable control knob to adjust expression range. In addition, the heavy-duty chassis, smooth-operating cam and textured, slip-resistant rubber surface ensure the KEP100 performs reliably in the studio or on the road. Built to withstand the punishment that comes with the job, the KEP100 gives keyboardists the action, and intuitive feel they require for exact musical expression.
On-Stage
On-Stage Expression Pedal
On-Stage ASMS4730 Isolation Vocal Shield
Dimensions (Overall): 20.1 inches (L), 10.9 inches (H) x 12.6 inches (W)Weight: 6.74 poundsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, Turn microphone stand into a recording environment. The ASMS4730 Isolation Shield is a lightweight and portable shield that mounts onto most standard microphone stands, creating a mini recording studio. Constructed from a vented aluminum surround panel, metal frame and 2” acoustic foam, the ASMS4730 blocks out unwanted background noise, and improves the direct sound output when recording. Included mounting brackets attach the shield easily to most standard mic stands, and an included microphone mounting bar can position mic as close as 2” from the screen, and as far as 7” away from the screen. Entire screen adjusts vertically up to 5-1/2”.
On-Stage
On-Stage ASMS4730  Isolation Vocal Shield
On-Stage Grip Clip Black
Winner of a "Best in Show" at Summer NAMM 2009, the Grip Clip prevents the inadvertent unplugging of guitars, basses, and other strap-worn instruments. By clipping high upon any size strap behind the player's back, the On-Stage Stands Grip Clip allows you to create a wide, gentle loop (make it as small or large as you want which reduces stress on both the strap and input jack while simultaneously reducing and protecting against the likelihood of a stepped on or snagged cable, and even kinking. The cable itself is attached to the cable clip via a snap-in channel sized to accommodate all popular instrument cables. It also acts as a breakaway cable so you don't have to worry about yanking your cable out of your instrument during intense performances. The On-Stage Stands Grip Clip is an exciting product designed for guitar players by guitar players, and fits seamlessly into any player's routine.
On-Stage
On-Stage Grip Clip Black
On-Stage Mic Screw Adapter
Dimensions (Overall): 4.0 inches (L), .3 inches (H) x 2.5 inches (W)Weight: .05 poundsHolds up to: .05 poundsElectronics Condition: NewWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 58"M to 38"F & bull; Wt: 0.02 lb.On-stage Stands MA200 Mic Screw Adapter is a 5/8" male to 3/8" female screw apapter for use with mic stands that have European 3/8" threads.
On-Stage
On-Stage Mic Screw Adapter
On-Stage Clamp-on Accessories Holder
The MY570 keeps all of your miking accessories within easy reach. This attachment bar fits most standard mic stands and booms - it will even clamp to the side of most amps! The 90 degree attachment piece is perfect for holding your studio headphones, cables, and other musical instruments when not in use. A friction locking knob secures nylon tipped screw to mic stand or boom.
On-Stage
On-Stage Clamp-on Accessories Holder
On-Stage MSB6000 Tripod Mic Stand Bag
Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, Designed to accommodate up to six full-size tripod stands and booms, the MSB6000 Mic Stand Bag boasts the same rugged construction and ergonomic considerations found in all On-Stage gear bags. Durable, black nylon resists road wear and tear, while interior padding guards against dings and drops. And of course, these 39 x 9.5 x 5 in. bags include both handles and shoulder straps for easy transport, hand-offs and storage.
On-Stage
On-Stage MSB6000 Tripod Mic Stand Bag
On-Stage KT7800 Keyboard Bench
This Three-Position X-Style is both affordable and perfect for fold-and-go use. Its all-purpose appeal make it a no-brainer for those looking to buy a basic bench for gigs, the studio or for home. Features: Weight Capacity: 375 lbs. Cushion Thickness: 2”Bench Seat Size: 12” x 17”Height in center position: 20”Construction: All-weldedWARNING: This product may contain chemicals known to the State of California to cause cancer, and birth defects and other reproductive harm.
On-Stage
On-Stage KT7800 Keyboard Bench
On-Stage SSAS7000B Mini Adjustable Speaker Stand
Dimensions (Overall): 27.75 inches (L), 4.25 inches (H) x 4.35 inches (W)Weight: 3.7 poundsHolds up to: 3.7 poundsElectronics Condition: NewWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, Light and compact, the SSAS7000B is an excellent choice for light-duty work in bars, clubs, hotels, churches and other venues where small portable PA’s are routinely used. An ergonomic knob adjusts stand height from 27” to 46”, while the folding tripod base maintains a low center of gravity, allowing exceptional stability when used with speakers up to 60 lbs. in weight. The 1-3/8” upper shaft is compatible with virtually all current pole-mount speakers.
On-Stage
On-Stage SSAS7000B Mini Adjustable Speaker Stand
On-Stage Music Stand Cart
Mighty yet maneuverable, the On-Stage SMC5000 holds 8-10 stands, turns on a dime and boasts a small footprint of 24.5" to 21.75" for easy storage and transport. Complete with high density EVA handle grips, an all but zero turn radius and treaded, non-slip wheels for formula one performance, the SMC5000's black powder coat finish compliments performance spaces as effectively as its 80 lb. capacity moves the music.
On-Stage
On-Stage Music Stand Cart
On-Stage DS7100B Basic Fixed Height Desktop Stand
The On-Stage Stands desktop stand has become the standard in the broadcasting industry! 4" shaft height, 6" base diameter. Black powder coat finish.
On-Stage
On-Stage DS7100B Basic Fixed Height Desktop Stand
On-Stage Speaker Stand Bag
A must for every roadie, this rugged padded nylon bag provides ample room for either two speaker stands, six mic stands or various drum hardware. Features an adjustable shoulder strap with metal clip for fast removal. Also includes hand straps for convenient handling. Two heavy gauge metal pulls are attached to the zipper so that the bag can be zipped at the center or side. All seams are crafted with corded piping that gives the bag its rigid shape.
On-Stage
On-Stage Speaker Stand Bag
On-Stage Speaker Stand Adapter
Dimensions (Overall): 4.1 inches (L), 1.7 inches (H) x 4.0 inches (W)Weight: .2 poundsHolds up to: .2 poundsElectronics Condition: NewWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, The On-Stage Stands speaker stand adapter fits on 1-3/8" stand for use with speaker cabinets that have 1-1/2" internal brackets.
On-Stage
On-Stage Speaker Stand Adapter
On-Stage Flip-Top Bench
For studio or home use, these benches are made from a quality wood construction, making them durable for the gigging musician, yet elegant enough for the classical pianist. The Flip-Top Keyboard bench features a 1.5” thick padded cushion, which provides deluxe comfort for hours of play. The featured flip-top seat provides storage space for music books and other accessories and the plastic feet have non-slip rubber end caps for added safety.Get yours today, with the security of our 85 plus years of experience and the Sam Ash Direct efficient order processing, your satisfaction is guaranteedWARNING: This product may contain chemicals known to the State of California to cause cancer, and birth defects and other reproductive harm.
On-Stage
On-Stage Flip-Top Bench
On-Stage MSA-9508 Posi-Lok Side Mount Boom Arm
7" mini-boom with side-mount clamp and Posi-Lok 52-tooth clutch. For mic stand or desktop.
On-Stage
On-Stage MSA-9508 Posi-Lok Side Mount Boom Arm
On-Stage Classic Speaker Stand
The construction of this steel-aluminum speaker stand makes it both lightweight and durable. And now On Stage and Sam Ash have teamed up to offer this reliable product at a remarkable price. Use either the 1 3/8” diameter upper shaft or the included 1½” adapter sleeve for a universal fit. ·, Universal fit with 1 3/8”upper shaft or 1½“ adapter. ·, Features a tension height adjustment knob and safety pin for added security. ·, Locking/Retractable leg housing with 120° design allows for low center of gravity and equal weight distribution. ·, Designed for use with mid-sized speakers; weight capacity 160lbs. ·, Height adjustable from 44” – 70” with a base spread between 32” – 48”Sam Ash and On Stage Stands have teamed up to offer you an exclusive deal on a reliable product. Get yours today, only from Sam Ash Direct.
On-Stage
On-Stage Classic Speaker Stand
On-Stage 2 LED Single Head Clip Light
Dimensions (Overall): 7.4 inches (L), 2.0 inches (H) x 4.9 inches (W)Weight: .25 poundsHolds up to: .25 poundsElectronics Condition: NewWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Flexible gooseneck allows for easy positioning at any angle & bull; Two high intensity LEDs in lamp head & bull; 3-way switch: 2 LEDs1 LEDOff & bull; Strong clip holds on to music stands and other surfaces & bull; Versatile design works great on desktopsAn ideal stage light for the performing musician, the Clip-On Solo LED Light features two adjustable Bright White High Intensity LED Lights on a single gooseneck. Two brightness levels with a 3-way switch allow options for both LED's on, 1 LED on, or off. The flexible gooseneck attachment allows for easy positioning at any angle. The clip easily attaches to music stand and the compact design also sits flat on a desktop! This light is powered by (3) AAA batteries and the batteries last for days without the light fading.
On-Stage
On-Stage 2 LED Single Head Clip Light
On-Stage Deluxe Keyboard Tier
Dimensions (Overall): 31.0 inches (L), 6.9 inches (H) x 17.0 inches (W)Weight: 15.54 poundsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Weight Capacity: 66 lbs. & bull; Arm Depth: 15.5" & bull; Arm Height Adj.: 10.5" & bull; Arm Depth Adj.: 6" & bull; Arm Tubing: 1.1"The On-Stage KSA8500 boasts 2 sets of fully and independently adjustable arms for the ultimate in  2nd and  3rd tier customization. Compatible with any 1" square or 30mm round-tubed stand, as well as On-Stage Z stands, each of the KSA8500's support arms feature an independent 10-degree increment posi-lok adjustment for height, angle, depth and width, providing 43.5" of total width distributed over a 2nd or 2nd and 3rd tier configuration. The telescoping stabilizer bar accommodates keyboard stands up to 32" in width, while non-slip rubber end caps protect an almost limitless array of keys, laptops, mixers and more.
On-Stage
On-Stage Deluxe Keyboard Tier
On-Stage MS8312 Upper Rocker-Lug Mic Stand with 12" Low-Profile Base
& bull; Tilting upper mic shaft: 4° & bull; Height Adjustment: 4" - 69" & bull; Base Diameter: 2 & bull; Base Weight: lbs. & bull; Standard 58 - 27 Threading for Clip and Accessory CompatibilityThe 12” MS8312 offers a new choice in straight stands...the Rocker-Lug! The patent-pending Rocker-Lug allows the upper mic shaft to tilt up to 40° off of vertical, so there is no need for a boom arm in many applications. Plus, the Rocker slides down effortlessly into the clutch for straight stand applications and for compact storage/transport. Other pro-level features include a 10-pound 12” base and a heavy-duty over-sized solid zinc mid-point clutch. The low-profile 12" base sports 6 rubber feet for stability and noise reduction. And because this stand is made for the working musician, shaft/base connection is made via a solid steel lug with coarse M20 threading. This coarse threading provides an excellent combination of fast assembly and secure connection, while extending thread wear far beyond fine-thread designs.
On-Stage
On-Stage MS8312 Upper Rocker-Lug Mic Stand with 12" Low-Profile Base
On-Stage Keyboard and Piano Bench
Dimensions (Overall): 23.0 inches (L), 5.1 inches (H) x 13.6 inches (W)Weight: 13.9 poundsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Comfortable & bull; Durable & bull; Solid construction & bull; Non-slip rubber feet & bull; AttractiveThe On-Stage KB8802B Keyboard and Piano Bench is a classic black bench made from a durable, quality wood construction. The design combines a 1.5" cushion with strategic air vents, providing deluxe comfort for hours of play. The KB8802B is an excellent choice for solid support and classic styling.
On-Stage
On-Stage Keyboard and Piano Bench
On-Stage All-Aluminum Speaker Stand Pack
Dimensions (Overall): 42.0 inches (L), 4.5 inches (H) x 8.4 inches (W)Weight: 11.05 poundsHolds up to: 11.05 poundsElectronics Condition: NewWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Two all-aluminum speaker stands & bull; Ome draw-string speaker bag & bull; 1-38" upper shaft & bull; Tension height adjustment knob and safety pin for added safety & bull; LockingRetractable leg housing with 120-degree design for low center of gravity and equal weight distributionIncludes two all-aluminum speaker stands and one speaker stand bag. Stand height adj: 48-73"; 120-lb. capacity each. Bag features drawstring closure, adjustable shoulder carrying strap, interior center divider. Holds two speaker stands.
On-Stage
On-Stage All-Aluminum Speaker Stand Pack
On-Stage Guitar String Winder
Dimensions (Overall): 5.6 inches (L), .75 inches (H) x 3.8 inches (W)Weight: .07 poundsPackage Quantity: 1Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Faster string loosening and tightening & bull; Durable plastic head & bull; Built-in notch removes acoustic bridge pins & bull; Works with most guitars, basses, banjos, and stringed folk instrumentsSave wrist from the torture of winding fresh strings. The GSW500 has all the features 'd expect from a standard string winder. Its durable plastic head makes for fast string loosening and tightening. The built-in notch removes acoustic bridge pins without marring the pins or the instrument itself. Works with most guitars, basses, banjos, and stringed folk instruments.
On-Stage
On-Stage Guitar String Winder
On Stage Stands MS7701B Tripod Boom Microphone Stand With On Stage Foam Windscreen Black + Mic Cable 20 ft. XLR + On Stage Unbreakable Dynamic Rubber Mic Clip
Solid cast end with standard 5/8-27 threads. Long 36inch boom with molded plastic counterweight. Euro-Style boom with separate clutches for length and angle of boom. Allows user to make one-handed adjustments of boom angle while performing. Professional quality die-cast zinc clutch locks vertical shaft at any height from 36 to 63 inches. With On Stage Foam Windscreen, Black On Stage Mic Cable, 20 ft. XLR Bulk On Stage Unbreakable Dynamic Rubber Mic Clip The On Stage 7701B Microphone Stand is a durable tripod mic stand and boom combination and just about the best value we've ever offered. These stands use the highest quality components. The legs fold down for the most compact storage. Setup height is adjustable from 36 to 63 inches. On Stage 7701B Tripod Microphone Boom Stand Features and Specifications Solid cast end with standard 5/8-27 threads. Long 30 inch boom with molded plastic counterweight. Euro-Style boom with separate clutches for length and angle of boom. Allows user to make one-handed adjustments of boom angle while performing. Professional quality die-cast zinc clutch locks vertical shaft at any height from 36 to 63 inches. Clip-on cable holder. Steel-reinforced plastic leg housing offers less weight and exceptional strength. Folding legs with plastic endcaps for durability and reduced floor vibration. Base spread: 23 inches Our best selling stand! This Euro Boom boasts hybrid sheet metal and high-impact plastic leg housing making it unbreakable. A removable boom arm and its ability to fold flat make this stand a must for every member of the band. Also features a cast steel mid-point clutch. One of the most popular microphone stands in the world, the MS7701B is designed to go wherever your music takes you. Packed with pro features and protected by a long-lasting black finish, the lightweight MS7701B is a great choice for almost any application.
On-Stage
On Stage Stands MS7701B Tripod Boom Microphone Stand With On Stage Foam Windscreen Black + Mic Cable 20 ft. XLR + On Stage Unbreakable Dynamic Rubber Mic Clip
On-Stage MY-570 Cable Clamp
Dimensions (Overall): 7.8 inches (L), 1.3 inches (H) x 5.0 inches (W)Weight: .4 poundsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Attachment dimensions: 3" x 3" & bull; Black powder coat finishThe MY570 keeps all of miking accessories within easy reach. This attachment bar fits most standard mic stands and booms - it will even clamp to the side of most amps! The 90 degree attachment piece is perfect for holding studio headphones, cables, and other musical instruments when not in use. A friction locking knob secures nylon tipped screw to mic stand or boom.
On-Stage
On-Stage MY-570 Cable Clamp
On-Stage Folding Tiltback Amp Stand Black Folds Flat
Dimensions (Overall): 26.4 inches (L), 13.4 inches (H) x 15.4 inches (W)Weight: 42.0 poundsHolds up to: 42.0 poundsElectronics Condition: NewWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, This tough-constructed Musicians Gear metal amp stand holds amp in a tilt-back position where it can be heard better by both and audience at lower volumes. Folds flat to pack away easily.
On-Stage
On-Stage Folding Tiltback Amp Stand Black Folds Flat
On-Stage On-Stage Push-Down Spring-Up Locking Acoustic Guitar Stand
Dimensions (Overall): 19.25 inches (L), 3.6 inches (H) x 5.8 inches (W)Weight: 3.46 poundsPackage Quantity: 1Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, The GS7141 features a unique spring mechanism that locks guitar in place, effectively making the stand and instrument one unit. The stand and guitar can be moved around stage or studio together with one hand. Operation couldn’t be easier; simply press guitar into the spring-loaded lower yoke and lock it into place under the upper yoke. Designed for the working musician, the GS7141 accommodates most full size acoustic guitars. Patent-pending design.
On-Stage
On-Stage On-Stage Push-Down Spring-Up Locking Acoustic Guitar Stand
On-Stage Subwoofer Adapter
Dimensions (Overall): 7.47 inches (L), 1.6 inches (H) x 1.62 inches (W)Weight: .92 poundsHolds up to: .92 poundsElectronics Condition: NewWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Application: Subwoofer adapter with removable M20 & bull; Weight Capacity: 100 lbs. & bull; Upper Adapter: Accepts male M20 & bull; Lower Adapter: Tapered to 1 38" with removable M20 to fit all subwoofers on the market & bull; Includes: Allen key for M20 lug removal Construction: SteelThe On-Stage SSA21 Subwoofer Adapter's female M20 threading attaches to M20 speaker shafts to accommodate virtually any subwoofer on the market, utilizing both removable M20 threading and a tapered, steel-lugged lower section to accept 13/8" cups. Whether it is a shallow M20, recessed M20, 1 3/8" cup or 1 3/8" cup with M20, the SSA21 will fit subwoofer.
On-Stage
On-Stage Subwoofer Adapter
On-Stage Hanging Speaker Bracket
Dimensions (Overall): 20.1 inches (L), 3.8 inches (H) x 19.35 inches (W)Weight: 12.04 poundsHolds up to: 12.04 poundsElectronics Condition: NewWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 2 Wall brackets & bull; 4 Lag bolts with washers & bull; 2 Crossbars & bull; 2 Crossbar bolts with locking nuts & bull; 3 Eye bolts with nutsThe all-steel On-Stage SS7990 Speaker Wall Mount provides 180 degrees of steering and comes complete with multiple tie points for tilting options, mounting hardware and instructions.
On-Stage
On-Stage Hanging Speaker Bracket
On-Stage Steel Speaker Stand Black
Dimensions (Overall): 41.0 inches (L), 5.0 inches (H) x 6.0 inches (W)Weight: 11.5 poundsHolds up to: 11.5 poundsElectronics Condition: NewWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 1-38" diameter upper shaft & bull; 1-12" adapter & bull; Tripod folding legs & bull; Non-slip rubber feet & bull; Holds up to 120 lb.On-Stage Stands' steel tripod-style speaker stand has a 1-3/8" diameter upper shaft with a 1-1/2" adapter which makes it compatible with most stand-socket equipped speakers. It supports up to 120 pounds and has non-slip rubber feet and a locking safety pin to hold speaker securely . Height adjusts from 45" to 74".
On-Stage
On-Stage Steel Speaker Stand Black
On-Stage Subwoofer System Speaker Sub Pole Black 42In
Dimensions (Overall): 41.5 inches (L), 1.3 inches (H) x 1.3 inches (W)Weight: .8 poundsHolds up to: .8 poundsElectronics Condition: NewWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 1-38" Upper Shaft Tubing & bull; 42" Shaft Length & bull; 160 lbs. Weight Capacity & bull; Aluminum Construction & bull; Powder Coat FinishSubwoofers are becoming an increasingly popular addition to mid-sized and smaller PA systems. The Subwoofer System Speaker Sub Pole is a heavy-duty 1-3/8" aluminum shaft that connects bass enclosures on the stage floor to high-frequency cabinets.
On-Stage
On-Stage Subwoofer System Speaker Sub Pole Black 42In
On-Stage On-Stage Utility Tray for X-style Keyboard Stands
Dimensions (Overall): 28.4 inches (L), 1.5 inches (H) x 14.75 inches (W)Weight: 9.79 poundsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, Need more workspace around the studio or on stage? The KSA7100 is for ! The KSA7100 mounts to any On-Stage X-Style keyboard stand, instantly turning it into a 28” x 14.5” tabletop. It is perfect for mixers, turntables, drum machines, computers, lighting controllers, monitors or anything else need at working height. It even makes a great trap stand for percussion instruments. Adjustable bottom-mounted brackets accommodate the height/width settings of keyboard stand. It’s never been easier to add a full-size utility tray to setup. Fits all OSS X-Style Keyboard Stands Single X Models.
On-Stage
On-Stage On-Stage Utility Tray for X-style Keyboard Stands
Back to Top