Padholdr Fit 12 Tablet Holder Matte Black
Padholdr Fit 12 Tablet Holder Matte BlackItem Condition : NewBrand : padholdrManufacturer : PadHoldrItem model number : PHF12-MBColor : Matte BlackProduct Information - Holder works with most 12" tablets from 11.25" to 12.25" wide, 7.75" to 8.25" tall, and up to 1" thick - Assembled with Tamper Proof Hardware to keep the tablet secure while in the holder - Works with or without cases on most tablets - Mounts to any mount that has the AMPS, VESA 75mm or VESA 100mm bolt pattern - Remove spacers on the side of the tablet to easily slide the tablet in and out of the holderThe Fit 12 is designed to fit 12" tablets with or without a case installed. This series belongs to our "hybrid" class of holders. Hybrid holders give you the option of locking your tablet in the holder or having the ability to install and remove the tablet quickly. The full-frame design and rounded corners give the holder a sleek design and come in multiple colors and styles. The Fit 12 holder has several mounting options available including AMPS, VESA 75mm, and VESA 100mm allowing you to bolt to any type of tablet mount or stand.
Padholdr Fit 12 Tablet Holder Matte Black
Padholdr Fit 12 Tablet Holder Matte Black Item Condition: New Brand: padholdr Manufacturer: PadHoldr Item model number: PHF12-MB Color: Matte Black Product Information - Holder works with most 12" tablets from 11.25" to 12.25" wide, 7.75" to 8.25" tall, and up to 1" thick - Assembled with Tamper Proof Hardware to keep the tablet secure while in the holder - Works with or without cases on most tablets - Mounts to any mount that has the AMPS, VESA 75mm or VESA 100mm bolt pattern - Remove spacers on the side of the tablet to easily slide the tablet in and out of the holder The Fit 12 is designed to fit 12" tablets with or without a case installed. This series belongs to our "hybrid" class of holders. Hybrid holders give you the option of locking your tablet in the holder or having the ability to install and remove the tablet quickly. The full-frame design and rounded corners give the holder a sleek design and come in multiple colors and styles. The Fit 12 holder has several mounting options available including AMPS, VESA 75mm, and VESA 100mm allowing you to bolt to any type of tablet mount or stand.
Padholdr Fit 7 Tablet Holder Gloss Black
Holder works with most 7" tablets from 7.125" to 8.125" wide, 4.25" to 5.2" tall, and up to 1" thickAssembled with Tamper Proof Hardware to keep the tablet secure while in the holderWorks with or without cases on most tabletsMounts to any mount that has the AMPS, VESA 75mm or VESA 100mm bolt patternRemove spacers on the side of the tablet to easily slide the tablet in and out of the holderThe Fit 7 is designed to fit 7" tablets with or without a case installed. This series belongs to our "hybrid" class of holders. Hybrid holders give you the option of locking your tablet in the holder or having the ability to install and remove the tablet quickly. The full-frame design and rounded corners give the holder a sleek design and come in multiple colors and styles. The Fit 7 holder has several mounting options available including AMPS, VESA 75mm, and VESA 100mm allowing you to bolt to any type of tablet mount or stand.
Padholdr ifit Mini Series Holder with Vesa Adapter (PHIFMVESA)
Padholdr ifit Mini Series Holder with Vesa Adapter (PHIFMVESA) Item Condition: New Brand: padholdr Manufacturer: Padholdr Item model number: PHIFMVESA Product Information - The open design of the iFit Mini holder allows you to access all of the necessary buttons, and access the charging port. The iFit Mini holder allows you to easily slide your iPad Mini in and out of the side of the holder - The Fit series have several key features that make them very universal. The iFit Mini series is designed to fit the iPad Mini with or without slim cases. All iFit series are designed to allow ultimate access to plug ins and necessary buttons - All iPad Minis The Padholdr iFit Mini VESA mounting iPad Mini holder is an excellent way for you to mount your iPad Mini to any VESA mount. A VESA mount is a mount that has a specific bolt pattern. The Padholdr iFit Mini VESA holder will work with any 75X75 or 100X100 VESA bolting pattern. To mount the iFit Mini holder you will first need to mount the VESA adapter plate to your mount. Once the adapter plate is installed you simply bolt the iFit Mini holder to the adapter plate.
Wall Mount for Padholdr Fit, Pro, and POS Tablet Holders with Swivel
Wall Mount for Padholdr Fit, Pro, and POS Tablet Holders with Swivel Item Condition: New Brand: padholdr Manufacturer: Padholdr Item model number: HMBS. 685-PM Color: Black Size: Swivel Mount Product Information - Included Swivel Mount that allows Tablet Holder to Rotate 360 Degrees, and Angle - Mount the Padholdr Fit, Pro, and POS holder to a flat surface - Single Gang Size - Pass Through to run Power or other Accessories through center of Mount The Padholdr Wall mount allows you to mount any of our Fit, Pro and POS Series Holders securely to a wall in just a few steps. The wall mount allows you to mount your tablet to the wall in a fixed portrait or landscape position or purchase the swivel mount allowing you to rotate the angle of the holder whenever you like. The wall mount screws to a flat surface then the tablet holder holder is bolted to the mount. This kit comes with a swivel mount that allows you to easily rotate the tablet holder in any direction you desire, or angle it in any direction.
Padholdr IFIT XPS18 Tablet Holder with Mega Duty Mount (PHIFXPS18MG9)
Padholdr IFIT XPS18 Tablet Holder with Mega Duty Mount (PHIFXPS18MG9) Item Condition: New Brand: padholdr Manufacturer: Padholdr Item model number: PHIFXPS18MG9 Product Information - The open design of the iFit XPS18 holder allows you to access all of the necessary buttons, and also access the charging port to keep your Dell XPS18 charged. - The Padholdr iFit XPS18 series holder is designed to specifically fit the Dell XPS 18 Tablet. The iFit holder is designed so you can lock your XPS18 in the holder, or be able to slide the tablet in and out of the holder. - The iFit XPS18 also comes standard with a VESA 75X75 and 100X100 mounting pattern. The Padholdr iFit XPS18 series holder is designed to specifically fit the Dell XPS 18 Tablet. The iFit holder is designed so you can lock your XPS18 in the holder, or be able to slide the tablet in and out of the holder.
Padholdr Utility Series Classic Locking Tablet Holder Gloss Black
Padholdr Utility Series Classic Locking Tablet Holder Gloss Black Item Condition: New Brand: padholdr Manufacturer: PadHoldr Item model number: PHUC-GB Color: Gloss Black Product Information - Works with tablets that are from 9.25" to 10.82" wide - Locking Bar clamps down on tablet to secure in holder using a key to lock on faceplate - U Shaped Design for Quick Removal - Works with or without cases on your tablet - Easily Access Buttons and Ports on Tablets The Utility Classic is our standard open-frame locking holder designed for 9" to 10" tablets incuding all iPad and iPad Air models. The open U-shape is designed to allow quick and easy tablet installation and removal for when you need to be mobile. Slide the steel locking-bar over the installed tablet and in to the locking mechanism when you need your tablet secured. Simply insert the key and remove the locking-bar to remove the tablet from the holder. The holder is fully adjustable allowing it to hold a variety of tablets with or without protective cases. The tamper-proof assembly hardware adds extra security.
Universal Tablet Stand Base for Padholdr Edge and Utility Series Holders
Universal Tablet Stand Base for Padholdr Edge and Utility Series Holders Item Condition: New Brand: padholdr Manufacturer: PadHoldr Item model number: TT Color: Black Size: Base for Edge and Utility Series Product Information - Easily bolt a Padholdr Edge or Utility Series Holder to the Base - Rubber Bumpers on plate prevent scratching of surface - Heavy Duty Steel Frame The Padholdr Tablet Base was designed so you can bolt or set your Padholdr Tablet Holder on a flat surface. The bases are manufactured out of Steel then powder coated so they not only have a nice finish but are very rugged. This base works with the Padholdr Edge and Utility Series Holders
Padholdr IFIT XPS18 Tablet Holder with Mega Duty Mount (PHIFXPS18HRB)
Padholdr IFIT XPS18 Tablet Holder with Mega Duty Mount (PHIFXPS18HRB) Item Condition: New Brand: padholdr Manufacturer: Padholdr Item model number: PHFXPS18-GB. HRB Product Information - The open design of the iFit XPS18 holder allows you to access all of the necessary buttons, and also access the charging port to keep your Dell XPS18 charged. - The Padholdr iFit XPS18 series holder is designed to specifically fit the Dell XPS 18 Tablet. The iFit holder is designed so you can lock your XPS18 in the holder, or be able to slide the tablet in and out of the holder. - The iFit XPS18 also comes standard with a VESA 75X75 and 100X100 mounting pattern. The Padholdr iFit XPS18 series holder is designed to specifically fit the Dell XPS 18 Tablet. The iFit holder is designed so you can lock your XPS18 in the holder, or be able to slide the tablet in and out of the holder.
Padholdr Utility Series Classic Locking Tablet Holder Matte Black
Works with tablets that are from 9.25" to 10.82" wide Locking Bar clamps down on tablet to secure in holder using a key to lock on faceplate U Shaped Design for Quick Removal Works with or without cases on your tablet Easily Access Buttons and Ports on Tablets The Utility Classic is our standard open-frame locking holder designed for 9" to 10" tablets incuding all iPad and iPad Air models. The open U-shape is designed to allow quick and easy tablet installation and removal for when you need to be mobile. Slide the steel locking-bar over the installed tablet and in to the locking mechanism when you need your tablet secured. Simply insert the key and remove the locking-bar to remove the tablet from the holder. The holder is fully adjustable allowing it to hold a variety of tablets with or without protective cases. The tamper-proof assembly hardware adds extra security.
Padholdr Utility XL Series Tablet Holder Kiosk Stand with Swivel (PHUXLKIOSKS)
Padholdr Utility XL Series Tablet Holder Kiosk Stand with Swivel (PHUXLKIOSKS) Item Condition: New Brand: padholdr Manufacturer: Padholdr Item model number: PHUXL-GB. KSTD. KIOSK. 685-PM Product Information - Holder Specifications Tablet Size Range: minimum width 9.25" / 235mm to maximum width 11.25" / 285.8 mm Height: minimum height 6.5" / 165.1 mm to maximum height 7.75" / 196.9 mm - Lockable Design The Utility series holders come with a high strength stainless steel locking bar that clamps over your tablet and keeps it securely in place in the holder. - The inside of the Utility series holder has a custom stamped out flocking material adhered to the Lexan that allows your tablet to easily slide in and out of the holder and prevent your tablet from getting scratched up over time. - Works with cases Our Utility series holders are manufactured to be able to adjust the width and depth of your holder to accommodate your tablet. Adjust the included spacers with your holder to create a nice fit around your tablet with or without a case. - Security Assembly Screws All of our locking series holders come with custom security type screws that prevent a thief from dis-assembling the holder without having the right tool. - Powder coated Steel Frame The heavy duty base and arm are manufactured out of steel, then powder coated a matte finish. - Fully Adjustable Mounting Head The top of the Kiosk stands has a fully adjustable arm that allows you to position the holder wherever you like. - Swivel Mount Included The swivel mount allows you to quickly change angles or tablet orientation by simply spinning the holder. The Padholdr Utility XL Series is our larger Utility series holder that will work for the large tablets on the market. The shape of the Utility holder is designed to allow you to easily place or remove the tablet in the holder. If you are looking at locking the tablet in the holder just place the included stainless steel locking stick over the tablet and ratchet into the holder for a secure fit. The Utility holder is fully adjustable making it easy to be able to hold a variety of tablets with or without protective cases on them. The Kiosk stands are made out of the strongest materials in the industry. Each Kiosk stand is manufactured out of steel then powder coated a matte black finish. The Kiosk stands measure 45.5" tall and the holder can be angled in any direction you like. Works With Apple iPad Air iPad 2 iPad with Retina (3rd generation) iPad with lightning port (4th generation) Samsung Galaxy Note 10.1 2014 Samsung Galaxy Tab 2 Samsung Galaxy Note 10.1 HP Touchpad Sony Xperia Nook HD+ Latte Imuz; Motorola Xoom Motorola Xoom 2 Samsung Ativ Tab 3 Lenovo Think Pad 2 Lenovo Yoga Acer Iconia A Gateway A60 Asus Transformer Pad Asus Memo Pad Series Google Nexus 10 Asus Vivo Tab Acer Iconia W Dell XPS 10 Microsoft Surface Microsoft Surface 2 and Pro Razer Edge Pro and many more.. (see specifications below and compare with your tablet)
Padholdr Social Series Premium Tablet Dash Kit for 1995-2004 Chevrolet
Fits: 1997 - 2002 Chevrolet Camaro, 1997 - 2004 Corvette & 1995 - 2000 Lumina Fits: 1998 - 2002 Chevrolet Blazer ( 2002 With Out CD ), 2000 Trailbazer, 1998 - 2002 S-Series P/U ( 2002 With Out CD ) & 1997 - 1999 Venture Van Works with: iPad Mini, Galaxy Tab 7, Dell Streak 7, BlackBerry PlayBook, and Other 7 Inch Tablets Includes: Padholdr Tablet Holder, Vehicle Specific Bracket, Fully Adjustable 6. Inch Arm & Complete Instruction Kit Works With Cases & 7. Inch Tablets The Padholdr in dash kits are the best solution for you to mount a tablet in your car. The dash kits bolt to the dash using factory bolts so you can maintain a clean install with no holes drilled in your dash. The typical install time is 15-20 minutes.
Padholdr Fit Small Series Tablet Holder Kiosk Stand with Swivel (PHFSKIOSKS)
Padholdr Fit Small Series Tablet Holder Kiosk Stand with Swivel (PHFSKIOSKS) Item Condition: New Brand: padholdr Manufacturer: Padholdr Item model number: PHFSKIOSKS Product Information - Holder Specifications Tablet Size Range: minimum width 7.125" / 181mm to maximum width 8.125" / 206.4 mm Height: minimum height 4.375" / 111.2 mm to maximum height 5.1875" / 131.8 mm - Lockable Design Included with each iFit holder is a set of locking Allen bolts to assemble the holder. To allow the tablet to easily come out of the holder simply remove one of the tensioner spacers and now your tablet can come in and out freely. - Anti-scratch Design The inside of the iFit series holder has a custom stamped out flocking material adhered to the Lexan that allows your iPad to easily slide in and out of the holder and prevent your iPad from getting scratched up over time. - Our Fit series holders are manufactured to be able to adjust the width, height and depth of your holder to accommodate your tablet. Adjust the included spacers with your holder to create a nice fit around your tablet. - Cut outs for access to controls and ports - Powder coated Steel Frame The heavy duty base and arm are manufactured out of steel, then powder coated a matte finish. - Fully Adjustable Mounting Head The top of the Kiosk stands has a fully adjustable arm that allows you to position the holder wherever you like. - Swivel Mount Included The swivel mount allows you to quickly change angles or tablet orientation by simply spinning the holder. The Padholdr Fit series is our collection of stylish looking tablet holders that Fit all of your tablet holder needs in one design. The Fit series have several key features that make them very universal for whatever tablet holder application you might need. The Fit Small series is designed to fit tablets with either Small cases on them, or tablets that are Smaller than the standard tablet size. All Fit series are designed to allow ultimate access to plug ins and necessary buttons on your tablet along with locking and non locking hardware. The Kiosk stands are made out of the strongest materials in the industry. Each Kiosk stand is manufactured out of steel then powder coated a matte black finish. The Kiosk stands measure 45.5" tall and the holder can be angled in any direction you like. Works With Kindle Fire HDX 7 Verizon ellipsis Acer Iconia B Google Nexus 7 and many more see specifications below and compare with your tablet
Padholdr ifit Classic Series Tablet Cup Holder with 12-Inch Arm (PHIFCCup12)
Padholdr ifit Classic Series Tablet Cup Holder with 12-Inch Arm (PHIFC Cup12) Item Condition: New Brand: padholdr Manufacturer: Padholdr Item model number: PHIFCCUP12 Product Information - The open design of the iFit Classic holder allows you to access all of the necessary buttons, and also access the charging port to keep your iPad charged. The iFit Classic holder allows you to easily slide your iPad in and out of the side of the holder. - 12 inch: 10.875" w X 19.25" h X 3.68" d / 295.3 mm X 489mm X 93.5 mm width 7.32" / 186mm height 9.6" / 243.9 mm 2lb - Apple iPad; iPad 2; iPad with Retina (3rd generation); iPad with lightning port (4th generation); The iFit Classic cup holder kits are the most universal application available to mount an iPad in your car. The Padholdr iFit Classic series stands out from the competitors by having an expanding base that allows you to securely fit the base in your cup holder. The cup holder mount also has a heavy duty aluminum arm that allows you to position the holder in any direction you like.
Padholdr ifit Air Series Tablet Cup Holder with 9-Inch Arm (PHIFACup9)
Padholdr ifit Air Series Tablet Cup Holder with 9-Inch Arm (PHIFA Cup9) Item Condition: New Brand: padholdr Manufacturer: Padholdr Item model number: PHIFACUP9 Product Information - The open design of the iFit Classic holder allows you to access all of the necessary buttons, and also access the charging port to keep your iPad charged. The iFit Classic holder allows you to easily slide your iPad in and out of the side of the holder. - 12 inch: 10.44" w X 19.25" h X 3.68" d / 320.7 mm X 489mm X 93.5 mm width 6.7" / 170.2 mm height 9.5" / 241.3 mm 2lb - Apple iPad Air Air; The iFit Air cup holder kits are the most universal application available to mount a iPad in your car. The Padholdr iFit Air series stands out from the competitors by having an expanding base that allows you to securely fit the base in your cup holder. The cup holder mount also has a heavy duty aluminum arm that allows you to position the holder in any direction you like.
Padholdr IFIT XPS18 Series Tablet Holder with Heavy Duty Wall Mount (PHIFXPS18HDWALL)
Padholdr IFIT XPS18 Series Tablet Holder with Heavy Duty Wall Mount (PHIFXPS18HDWALL) Item Condition: New Brand: padholdr Manufacturer: Padholdr Item model number: PHFM-GB. KSTD. KIOSK. 685-PM Product Information - The open design of the iFit XPS18 holder allows you to access all of the necessary buttons, and also access the charging port to keep your Dell XPS18 charged. - The Padholdr iFit XPS18 series holder is designed to specifically fit the Dell XPS 18 Tablet. The iFit holder is designed so you can lock your XPS18 in the holder, or be able to slide the tablet in and out of the holder. - The iFit XPS18 also comes standard with a VESA 75X75 and 100X100 mounting pattern. The Padholdr iFit holder with Heavy Duty Wall mount is our most commercial grade tablet holder application that allows you to mount your XPS18 to your wall.
Padholdr Aluminum Utility Series 20-Inch Tablet Holder Floor Mount (PHAUHDFLR20)
Padholdr Aluminum Utility Series 20-Inch Tablet Holder Floor Mount (PHAUHDFLR20) Item Condition: New Brand: padholdr Manufacturer: Padholdr Item model number: PHAUHDFLR20 Product Information - The open design of the Aluminum Utility holder allows you to access all of the necessary buttons, and also access the charging port. Another feature of the Aluminum Utility holder is the option to lock your tablet within the holder. - The shape of the Aluminum Utility holder is designed to allow you to easily place or remove the tablet in the holder. Aluminum Utility holder is fully adjustable making it easy to be able to hold a variety of tablets with or without protective cases on them - Apple iPad; iPad Air; iPad 2; iPad with Retina (3rd generation); iPad with lightning port (4th generation); Samsung Galaxy Note 10.1 2014; Samsung Galaxy Tab 2; Samsung Galaxy Note 10.1; HP Touchpad; Sony Xperia; Nook HD+ The Padholdr Aluminum Utility heavy duty floor mount is the most stable universal way to mount a tablet in your vehicle without drilling any holes in your car. The floor mounts get installed by removing your seat bolt, sliding the bracket under the seat rail, then tightening the bolt back in the seat. The install of the Aluminum Utility floor mount is about 5 minutes, and with the adjustable base and neck you can adjust your tablet holder in whatever direction you like.
Padholdr ifit Mini Series Tablet Cup Holder with 9-Inch Arm (PHIFMCup9)
Padholdr ifit Mini Series Tablet Cup Holder with 9-Inch Arm (PHIFM Cup9) Item Condition: New Brand: padholdr Manufacturer: Padholdr Item model number: PHIFMCUP9 Product Information - The open design of the iFit Mini holder allows you to access all of the necessary buttons, and also access the charging port to keep your iPad Mini charged. iFit Mini holder allows you to easily slide your iPad Mini in and out of the side of the holder. - 9 inch: 9.75" w X 15.375" h X 3.68" d / 231.8 mm X 390.6 mm X 93.5 mm minimum width 7.25" / 184.2 mm to maximum width 8.375" / 212.8 mm minimum height 4.68" / 118.9 mm to maximum height 5.68" / 144.3 mm 2lb - All iPad Minis The iFit Mini cup holder kits are the most universal application available to mount a iPad and iPad Mini in your car. The Padholdr iFit Mini series stands out from the competitors by having an expanding base that allows you to securely fit the base in your cup holder. The cup holder mount also has a heavy duty aluminum arm that allows you to position the holder in any direction you like.
Padholdr Fit Small Series Tablet Holder 30-Inch Tall Stand (PHFSSTD30)
Padholdr Fit Small Series Tablet Holder 30-Inch Tall Stand (PHFSSTD30) Item Condition: New Brand: padholdr Manufacturer: Padholdr Item model number: PHFSSTD30 Product Information - Holder Specifications Tablet Size Range: minimum width 7.125" / 181mm to maximum width 8.125" / 206.4 mm Height: minimum height 4.375" / 111.2 mm to maximum height 5.1875" / 131.8 mm - Lockable Design Included with each I Fit holder is a set of locking Allen bolts to assemble the holder. To allow the tablet to easily come out of the holder simply remove one of the tensioner spacers and now your tablet can come in and out freely. - Anti-scratch Design The inside of the I Fit series holder has a custom stamped out flocking material adhered to the Lexan that allows your iPad to easily slide in and out of the holder and prevent your iPad from getting scratched up over time. - Our Fit series holders are manufactured to be able to adjust the width, height and depth of your holder to accommodate your tablet. Adjust the included spacers with your holder to create a nice fit around your tablet. - Cut outs for access to controls and ports - Steel Base Manufactured out of. 1" thick steel then powder coated to give you extra stability - Non Sagging Flexible Arm Each flexible mount comes with a fully adjustable 20" arm that will not sag even with the weight of your tablet with a thick case - Holder Specifications Tablet Size Range: minimum width 7.125" / 181mm to maximum width 8.125" / 206.4 mm Height: minimum height 4.375" / 111.2 mm to maximum height 5.1875" / 131.8 mm - Lockable Design Included with each iFit holder is a set of locking Allen bolts to assemble the holder. To allow the tablet to easily come out of the holder simply remove one of the tensioner spacers and now your tablet can come in and out freely. - Anti-scratch Design The inside of the iFit series holder has a custom stamped out flocking material adhered to the Lexan that allows your iPad to easily slide in and out of the holder and prevent your iPad from getting scratched up over time. - Our Fit series holders are manufactured to be able to adjust the width, height and depth of your holder to accommodate your tablet. Adjust the included spacers with your holder to create a nice fit around your tablet. - Cut outs for access to controls and ports - Steel Base Manufactured out of. 1" thick steel then powder coated to give you extra stability - Non Sagging Flexible Arm Each flexible mount comes with a fully adjustable 20" arm that will not sag even with the weight of your tablet with a thick case The Padholdr Fit series is our collection of stylish looking tablet holders that Fit all of your tablet holder needs in one design. The Fit series have several key features that make them very universal for whatever tablet holder application you might need. The Fit Small series is designed to fit tablets with either Small cases on them, or tablets that are Smaller than the standard tablet size. All Fit series are designed to allow ultimate
Padholdr ifit Classic Series Tablet Cup Holder with 9-Inch Arm (PHIFCCup9)
Padholdr ifit Classic Series Tablet Cup Holder with 9-Inch Arm (PHIFC Cup9) Item Condition: New Brand: padholdr Manufacturer: Padholdr Item model number: PHIFCCUP9 Product Information - The open design of the iFit Classic holder allows you to access all of the necessary buttons, and also access the charging port to keep your iPad charged. The iFit Classic holder allows you to easily slide your iPad in and out of the side of the holder. - 9 inch: 10.875" w X 16.25" h X 3.68" d / 295.3 mm X 412.8 mm X 93.5 mm width 7.32" / 186mm height 9.6" / 243.9 mm 2lb - Apple iPad; iPad 2; iPad with Retina (3rd generation); iPad with lightning port (4th generation); The iFit Classic cup holder kits are the most universal application available to mount an iPad in your car. The Padholdr iFit Classic series stands out from the competitors by having an expanding base that allows you to securely fit the base in your cup holder. The cup holder mount also has a heavy duty aluminum arm that allows you to position the holder in any direction you like.
Padholdr ifit Classic Series Tablet Cup Holder with 6-Inch Arm (PHIFCCup6)
Padholdr ifit Classic Series Tablet Cup Holder with 6-Inch Arm (PHIFC Cup6) Item Condition: New Brand: padholdr Manufacturer: Padholdr Item model number: PHIFCCUP6 Product Information - The open design of the iFit Classic holder allows you to access all of the necessary buttons, and also access the charging port to keep your iPad charged. The iFit Classic holder allows you to easily slide your iPad in and out of the side of the holder. - 6 inch: 10.875" w X 13.25" h X 3.68" d / 295.3 mm X 336.6 mm X 93.5 mm width 7.32" / 186mm height 9.6" / 243.9 mm 2lb - Apple iPad; iPad 2; iPad with Retina (3rd generation); iPad with lightning port (4th generation); The iFit Classic cup holder kits are the most universal application available to mount an iPad in your car. The Padholdr iFit Classic series stands out from the competitors by having an expanding base that allows you to securely fit the base in your cup holder. The cup holder mount also has a heavy duty aluminum arm that allows you to position the holder in any direction you like.
Padholdr Social Series Premium Tablet Dash Kit for 1996-2000 Toyota RAV4
Fits: 1996 - 2000 Toyota RAV47. Inch TabletsWorks with: iPad Mini, Galaxy Tab 7, Dell Streak 7, BlackBerry PlayBook, and Other 7 Inch TabletsIncludes: Padholdr Tablet Holder, Vehicle Specific Bracket, Fully Adjustable 6. Inch Arm & Complete Instruction KitWorks With CasesThe Padholdr in dash kits are the best solution for you to mount a tablet in your car. The dash kits bolt to the dash using factory bolts so you can maintain a clean install with no holes drilled in your dash. The typical install time is 15-20 minutes.
Tablet Holder Stand 40 inch Tall Designed for The Padholdr Utility Series with Swivel
Tablet Holder Stand 40 inch Tall Designed for The Padholdr Utility Series with Swivel Item Condition: New Brand: padholdr Manufacturer: PadHoldr Item model number: STD. 40. AU. 685-PM Color: Padholdr Utility Series Tablet Holders Size: Swivel: Yes Product Information - Swivel Mount Allows you to Rotate your Tablet 360 Degrees to View in Portrait or Landscape - Designed to work with the Padholdr Utility Series Holders - 40 inch Tall Stand Works Great Next to Bed, at Hospital, Trade Shows, and more - High Strength Flexible Arm doesnt Sag Over Time - AMPS Mounting Pattern Allows Stand to be Universal to Most Tablet Holders Padholdr manufactures several types of tablet stands that allow you to choose a stand specifically to fit your needs. Each stand is manufactured in the USA and is assembled using high grade materials. The 40 inch stand comes with a steel base plate, a rigid (non flexible) 24 inch arm, and a flexible 16" arm. This tablet stand is designed to work with our Padholdr Utility Series tablet holders, but has the AMPS mounting configuration so will work with any tablet holder with the AMPS pattern. The floor plate is powder coated black, and the arms are coated with a black vinyl. This model comes with a swivel mount that allows you to rotate swivel or landscape.
Padholdr Social Series Premium Tablet Dash Kit for 2008 - 2014 Jeep and Volkswagen
Fits: 2008 - 2010 Jeep Commander, 2009 - 2012 Compass, 2008 - 2010 Grand Cherokee, 2008 - 2012 Liberty, 2009 - 2012 Patriot, 2008 - 2012 Jeep Wrangler & UnlimitedFits: 2010 - 2012 Volkswagen RoutanWorks with: iPad Mini, Galaxy Tab 7, Dell Streak 7, BlackBerry PlayBook, and Other 7 Inch TabletsIncludes: Padholdr Tablet Holder, Vehicle Specific Bracket, Fully Adjustable 6. Inch Arm & Complete Instruction KitThe Padholdr in dash kits are the best solution for you to mount a tablet in your car. The dash kits bolt to the dash using factory bolts so you can maintain a clean install with no holes drilled in your dash. The typical install time is 15-20 minutes.
Padholdr Fit Small Series Tablet Holder 20-Inch Flexible Arm with Swivel (PHFSFLX20S)
Padholdr Fit Small Series Tablet Holder 20-Inch Flexible Arm with Swivel (PHFSFLX20S) Item Condition: New Brand: padholdr Manufacturer: Padholdr Item model number: PHFSFLX20S Product Information - Holder Specifications Tablet Size Range: minimum width 7.125" / 181mm to maximum width 8.125" / 206.4 mm Height: minimum height 4.375" / 111.2 mm to maximum height 5.1875" / 131.8 mm - Lockable Design Included with each iFit holder is a set of locking Allen bolts to assemble the holder. To allow the tablet to easily come out of the holder simply remove one of the tensioner spacers and now your tablet can come in and out freely. - Anti-scratch Design The inside of the iFit series holder has a custom stamped out flocking material adhered to the Lexan that allows your iPad to easily slide in and out of the holder and prevent your iPad from getting scratched up over time. - Our Fit series holders are manufactured to be able to adjust the width, height and depth of your holder to accommodate your tablet. Adjust the included spacers with your holder to create a nice fit around your tablet. - Cut outs for access to controls and ports - Optional Mounting Options Included is a flat steel plate and a C clamp allowing you to choose how you want to mount your flexible arm - Non Sagging Flexible Arm Each flexible mount comes with a fully adjustable 20" arm that will not sag even with the weight of your tablet with a thick case - Swivel Mount Included The swivel mount allows you to quickly change angles or tablet orientation by simply spinning the holder. The Padholdr Fit series is our collection of stylish looking tablet holders that Fit all of your tablet holder needs in one design. The Fit series have several key features that make them very universal for whatever tablet holder application you might need. The Fit Small series is designed to fit tablets with either Small cases on them, or tablets that are Smaller than the standard tablet size. All Fit series are designed to allow ultimate access to plug ins and necessary buttons on your tablet along with locking and non locking hardware. The Flexible Arms are built with strength in mind. Each Flexible arm is 20" long and is built out of high strength steel that wont sag regardless of your tablet weight. The kits come with two ways to mount the arm including a flat plate or a C clamp design. Works With Kindle Fire HDX 7 Verizon ellipsis Acer Iconia B Google Nexus 7 and many more see specifications below and compare with your tablet
Padholdr Social Series Premium Tablet Dash Kit for 2002-2006 Subaru Impreza Models
Fits: 2005 - 2006 Subaru Impreza With Manual Climate Control Fits: 2002 - 2004 Subaru Impreza Outback Sport Wagon With Manual Climate Control, Impreza Sedan, Impreza Wagon & Impreza WRX Works with: iPad Mini, Galaxy Tab 7, Dell Streak 7, BlackBerry PlayBook, and Other 7 Inch Tablets Includes: Padholdr Tablet Holder, Vehicle Specific Bracket, Fully Adjustable 6. Inch Arm & Complete Instruction Kit Works With Cases & 7. Inch Tablets The Padholdr in dash kits are the best solution for you to mount a tablet in your car. The dash kits bolt to the dash using factory bolts so you can maintain a clean install with no holes drilled in your dash. The typical install time is 15-20 minutes.
Padholdr Fit Small Series Tablet Holder 30-Inch Tall Stand with Swivel (PHFSSTD30S)
Padholdr Fit Small Series Tablet Holder 30-Inch Tall Stand with Swivel (PHFSSTD30S) Item Condition: New Brand: padholdr Manufacturer: Padholdr Item model number: PHFSSTD30S Product Information - Holder Specifications Tablet Size Range: minimum width 7.125" / 181mm to maximum width 8.125" / 206.4 mm Height: minimum height 4.375" / 111.2 mm to maximum height 5.1875" / 131.8 mm - Lockable Design Included with each iFit holder is a set of locking Allen bolts to assemble the holder. To allow the tablet to easily come out of the holder simply remove one of the tensioner spacers and now your tablet can come in and out freely. - Anti-scratch Design The inside of the iFit series holder has a custom stamped out flocking material adhered to the Lexan that allows your iPad to easily slide in and out of the holder and prevent your iPad from getting scratched up over time. - Our Fit series holders are manufactured to be able to adjust the width, height and depth of your holder to accommodate your tablet. Adjust the included spacers with your holder to create a nice fit around your tablet. - Cut outs for access to controls and ports - Steel Base Manufactured out of. 1" thick steel then powder coated to give you extra stability - Non Sagging Flexible Arm Each flexible mount comes with a fully adjustable 20" arm that will not sag even with the weight of your tablet with a thick case - Swivel Mount Included The swivel mount allows you to quickly change angles or tablet orientation by simply spinning the holder. The Padholdr Fit series is our collection of stylish looking tablet holders that Fit all of your tablet holder needs in one design. The Fit series have several key features that make them very universal for whatever tablet holder application you might need. The Fit Small series is designed to fit tablets with either Small cases on them, or tablets that are Smaller than the standard tablet size. All Fit series are designed to allow ultimate access to plug ins and necessary buttons on your tablet along with locking and non locking hardware. The floor stands are designed with quality in mind. Each floor stand is manufactured out of only high end components giving you a stable floor stand without any sagging of the flexible arm. The short stands sit 30" high and include a 16" flexible arm Works With Kindle Fire HDX 7 Verizon ellipsis Acer Iconia B Google Nexus 7 and many more see specifications below and compare with your tablet
Padholdr Docking Series Economy Holder 2007-2012 Acura MDX for iPad 2 and 3
Padholdr Docking Series Economy Holder 2007-2012 Acura MDX for iPad 2 and 3 Item Condition: New Brand: padholdr Item model number: PHD275116-307 Product Information - Works with: iPad 2 & 3 - Includes: Padholdr Tablet Holder, Vehicle Specific Bracket, Fully Adjustable 6. Inch Arm & Complete Instruction Kit - Does Not Work With Cases - Keeps IPad Charged (Charger Not Included) The Padholdr in dash kits are the best solution for you to mount a tablet in your car. The dash kits bolt to the dash using factory bolts so you can maintain a clean install with no holes drilled in your dash. The typical install time is 15-20 minutes.
Padholdr iFit Mini Series Tablet Holder 40-Inch Tall Stand with Swivel (PHIFMSTD40S)
Padholdr iFit Mini Series Tablet Holder 40-Inch Tall Stand with Swivel (PHIFMSTD40S) Item Condition: New Brand: padholdr Manufacturer: Padholdr Item model number: PHIFMSTD40S Product Information - Holder Specifications Tablet Size Range minimum width 7.25" / 184.2 mm to maximum width 8.375" / 212.8 mm minimum height 4.68" / 118.9 mm to maximum height 5.68" / 144.3 mm Works With iPad Mini - Lockable Design Included with each iFit holder is a set of locking Allen bolts to assemble the holder. To allow the tablet to easily come out of the holder simply remove one of the tensioner spacers and now your tablet can come in and out freely. - Anti-scratch Design The inside of the iFit series holder has a custom stamped out flocking material adhered to the Lexan that allows your iPad to easily slide in and out of the holder and prevent your iPad from getting scratched up over time. - Works Vertical and Horizontal We designed our iFit series to be able to work in portrait (horizontal) and landscape (vertical) configurations. If you are looking to have access to portrait and landscape modes frequently purchase our swivel mount accessory. - Cut outs for access to controls and ports - Steel Base Manufactured out of. 1" thick steel then powder coated to give you extra stability - Non Sagging Flexible Arm Each flexible mount comes with a fully adjustable 20" arm that will not sag even with the weight of your tablet with a thick case - Swivel Mount Included The swivel mount allows you to quickly change angles or tablet orientation by simply spinning the holder. The Padholdr iFit series is our collection of stylish looking tablet holders that Fit all of your iPad holder needs in one design. The Fit series have several key features that make them very universal for whatever tablet holder application you might need. The iFit Mini series is designed to fit the iPad Mini with or without slim cases. All iFit series are designed to allow ultimate access to plug ins and necessary buttons on your iPad along with locking and non locking hardware. The floor stands are designed with quality in mind. Each floor stand is manufactured out of only high end components giving you a stable floor stand without any sagging of the flexible arm. The tall stands sit 40" high and include a 16" flexible arm
Padholdr Utility XL Series Tablet Holder 20-Inch Flexible Arm with Swivel (PHUXLFLX20S)
Padholdr Utility XL Series Tablet Holder 20-Inch Flexible Arm with Swivel (PHUXLFLX20S) Item Condition: New Brand: padholdr Manufacturer: Padholdr Item model number: PHUXLFLX20S Product Information - Holder Specifications Tablet Size Range: minimum width 9.25" / 235mm to maximum width 11.25" / 285.8 mm Height: minimum height 6.5" / 165.1 mm to maximum height 7.75" / 196.9 mm - Lockable Design The Utility series holders come with a high strength stainless steel locking bar that clamps over your tablet and keeps it securely in place in the holder. - The inside of the Utility series holder has a custom stamped out flocking material adhered to the Lexan that allows your tablet to easily slide in and out of the holder and prevent your tablet from getting scratched up over time. - Works with cases Our Utility series holders are manufactured to be able to adjust the width and depth of your holder to accommodate your tablet. Adjust the included spacers with your holder to create a nice fit around your tablet with or without a case. - Security Assembly Screws All of our locking series holders come with custom security type screws that prevent a thief from dis-assembling the holder without having the right tool. - Optional Mounting Options Included is a flat steel plate and a C clamp allowing you to choose how you want to mount your flexible arm - Non Sagging Flexible Arm Each flexible mount comes with a fully adjustable 20" arm that will not sag even with the weight of your tablet with a thick case - Swivel Mount Included The swivel mount allows you to quickly change angles or tablet orientation by simply spinning the holder. The Padholdr Utility XL Series is our larger Utility series holder that will work for the large tablets on the market. The shape of the Utility holder is designed to allow you to easily place or remove the tablet in the holder. If you are looking at locking the tablet in the holder just place the included stainless steel locking stick over the tablet and ratchet into the holder for a secure fit. The Utility holder is fully adjustable making it easy to be able to hold a variety of tablets with or without protective cases on them. The Flexible Arms are built with strength in mind. Each Flexible arm is 20" long and is built out of high strength steel that wont sag regardless of your tablet weight. The kits come with two ways to mount the arm including a flat plate or a C clamp design. Works With Apple iPad Air iPad 2 iPad with Retina (3rd generation) iPad with lightning port (4th generation) Samsung Galaxy Note 10.1 2014 Samsung Galaxy Tab 2 Samsung Galaxy Note 10.1 HP Touchpad Sony Xperia Nook HD+ Latte Imuz; Motorola Xoom Motorola Xoom 2 Samsung Ativ Tab 3 Lenovo Think Pad 2 Lenovo Yoga Acer Iconia A Gateway A60 Asus Transformer Pad Asus Memo Pad Series Google Nexus 10 Asus Vivo Tab Acer Iconia W Dell XPS 10 Microsoft Surface Microsoft Surface 2 and Pro Razer Edge Pro and many more.. (see specifications below and compare with your tablet)
Padholdr iFit Air Series Tablet Holder Heavy Duty Mount with 24-Inch Arm (PHIFA001S24)
Padholdr iFit Air Series Tablet Holder Heavy Duty Mount with 24-Inch Arm (PHIFA001S24) Item Condition: New Brand: padholdr Manufacturer: Padholdr Item model number: PHIFA001S24 Product Information - Holder Specifications Tablet Size Range width 6.7" / 170.2 mm Works With Apple iPad Air - Lockable Design Included with each iFit holder is a set of locking Allen bolts to assemble the holder. To allow the tablet to easily come out of the holder simply remove one of the tensioner spacers and now your tablet can come in and out freely. - Anti-scratch Design The inside of the iFit series holder has a custom stamped out flocking material adhered to the Lexan that allows your iPad to easily slide in and out of the holder and prevent your iPad from getting scratched up over time. - Works Vertical and Horizontal We designed our iFit series to be able to work in portrait (horizontal) and landscape (vertical) configurations. If you are looking to have access to portrait and landscape modes frequently purchase our swivel mount accessory. - Cut outs for access to controls and ports - All Aluminum top to bottom the heavy duty mounts are manufactured out of all aluminum - Works on Flat and Curved Surfaces With bendable feet you can mount the base of the mount to most curved or flat surfaces including dashboards - 24" Arm The Padholdr iFit series is our collection of stylish looking tablet holders that Fit all of your iPad holder needs in one design. The Fit series have several key features that make them very universal for whatever iPad holder application you might need. The iFit Air series is designed to fit the iPad Air without a case. All iFit series are designed to allow ultimate access to plug ins and necessary buttons on your iPad along with locking hardware. The heavy duty mounts are the strongest, well built, mounts in the industry that are designed to mount to any flat or curved surface. The heavy duty mounts come with a 4.125 inch base that allows the 6" arm to be angled in any direction desired. The top of the 6" arm also has an adjustable mounting plate allowing you to position the holder in any desired location. The heavy duty mounts are the most popular for commercial applications including fire, police, medical, taxi, and fleet vehicles
Padholdr Fit Small Series Tablet Holder Heavy Duty Mount with 12-Inch Arm (PHFS001S12)
Padholdr Fit Small Series Tablet Holder Heavy Duty Mount with 12-Inch Arm (PHFS001S12) Item Condition: New Brand: padholdr Manufacturer: Padholdr Item model number: PHFS001S12 Product Information - Holder Specifications Tablet Size Range: minimum width 7.125" / 181mm to maximum width 8.125" / 206.4 mm Height: minimum height 4.375" / 111.2 mm to maximum height 5.1875" / 131.8 mm - Lockable Design Included with each iFit holder is a set of locking Allen bolts to assemble the holder. To allow the tablet to easily come out of the holder simply remove one of the tensioner spacers and now your tablet can come in and out freely. - Anti-scratch Design The inside of the iFit series holder has a custom stamped out flocking material adhered to the Lexan that allows your iPad to easily slide in and out of the holder and prevent your iPad from getting scratched up over time. - Our Fit series holders are manufactured to be able to adjust the width, height and depth of your holder to accommodate your tablet. Adjust the included spacers with your holder to create a nice fit around your tablet. - Cut outs for access to controls and ports - All Aluminum top to bottom the heavy duty mounts are manufactured out of all aluminum - Works on Flat and Curved Surfaces With bendable feet you can mount the base of the mount to most curved or flat surfaces including dashboards - 12" Arm The Padholdr Fit series is our collection of stylish looking tablet holders that Fit all of your tablet holder needs in one design. The Fit series have several key features that make them very universal for whatever tablet holder application you might need. The Fit Small series is designed to fit tablets with either Small cases on them, or tablets that are Smaller than the standard tablet size. All Fit series are designed to allow ultimate access to plug ins and necessary buttons on your tablet along with locking and non locking hardware. The heavy duty mounts are the strongest, well built, mounts in the industry that are designed to mount to any flat or curved surface. The heavy duty mounts come with a 4.125 inch base that allows the 6" arm to be angled in any direction desired. The top of the 6" arm also has an adjustable mounting plate allowing you to position the holder in any desired location. The heavy duty mounts are the most popular for commercial applications including fire, police, medical, taxi, and fleet vehicles Works With Kindle Fire HDX 7 Verizon ellipsis Acer Iconia B Google Nexus 7 and many more see specifications below and compare with your tablet
Padholdr iFit Mini Series Tablet Holder Heavy Duty Mount with 20-Inch Arm (PHIFM001S20)
Padholdr iFit Mini Series Tablet Holder Heavy Duty Mount with 20-Inch Arm (PHIFM001S20) Item Condition: New Brand: padholdr Manufacturer: Padholdr Item model number: PHIFM001S20 Product Information - Holder Specifications Tablet Size Range minimum width 7.25" / 184.2 mm to maximum width 8.375" / 212.8 mm minimum height 4.68" / 118.9 mm to maximum height 5.68" / 144.3 mm Works With iPad Mini - Lockable Design Included with each iFit holder is a set of locking Allen bolts to assemble the holder. To allow the tablet to easily come out of the holder simply remove one of the tensioner spacers and now your tablet can come in and out freely. - Anti-scratch Design The inside of the iFit series holder has a custom stamped out flocking material adhered to the Lexan that allows your iPad to easily slide in and out of the holder and prevent your iPad from getting scratched up over time. - Works Vertical and Horizontal We designed our iFit series to be able to work in portrait (horizontal) and landscape (vertical) configurations. If you are looking to have access to portrait and landscape modes frequently purchase our swivel mount accessory. - Cut outs for access to controls and ports - All Aluminum top to bottom the heavy duty mounts are manufactured out of all aluminum - Works on Flat and Curved Surfaces With bendable feet you can mount the base of the mount to most curved or flat surfaces including dashboards - 20" Arm The Padholdr iFit series is our collection of stylish looking tablet holders that Fit all of your iPad holder needs in one design. The Fit series have several key features that make them very universal for whatever tablet holder application you might need. The iFit Mini series is designed to fit the iPad Mini with or without slim cases. All iFit series are designed to allow ultimate access to plug ins and necessary buttons on your iPad along with locking and non locking hardware. The heavy duty mounts are the strongest, well built, mounts in the industry that are designed to mount to any flat or curved surface. The heavy duty mounts come with a 4.125 inch base that allows the 6" arm to be angled in any direction desired. The top of the 6" arm also has an adjustable mounting plate allowing you to position the holder in any desired location. The heavy duty mounts are the most popular for commercial applications including fire, police, medical, taxi, and fleet vehicles
Padholdr Pro Series V11 Holder Built specifically for The Dell Venue 11 Tablet with Lock in Front
Designed Specifically for Dell 11 inch tablets including Dell Venue 11 5000, Dell Venue 11 7000, and Dell Latitude Tablets Allows access to all buttons, ports, cameras, and other items on the tablets Holder is assembled with Tamper Proof Hardware making it difficult to disassemble without the correct tools Includes Push type lock located on the front of the holder. Simply use the included key to slide the tablet out of the holder Includes the VESA 75, VESA 100, and AMPS mounting patterns The Pro Series line of holders is one of our most secure. With a mechanical lock and assembled with tamper-resistant hardware you can leave your tablet in high-traffic areas worry free. The Pro V11 model has been designed specifically to fit the Dell Venue 11 Pro 5000, Dell Venue 11 Pro 7000 and Dell Latitude 11 tablets and is most commonly used in medical environments. Built in to the the holder are the widely used VESA MIS-D (75mm and 100mm) and AMPS mounting patterns allowing you to mount your holder on one of our many mounting systems or on any compatible mount.
Padholdr Fit Medium Series Tablet Holder Cup Holder Mount with 9-Inch Arm (PHFMCUP9)
Padholdr Fit Medium Series Tablet Holder Cup Holder Mount with 9-Inch Arm (PHFMCUP9) Item Condition: New Brand: padholdr Manufacturer: Padholdr Item model number: PHFMCUP9 Product Information - Holder Specifications Tablet Size Range: minimum width 7.875" / 200.1 mm to maximum width 9.875" / 250.9 mm Height: minimum height 6.625" / 168.3 mm to maximum height 7.875" / 200.1 mm - Lockable Design Included with each iFit holder is a set of locking Allen bolts to assemble the holder. To allow the tablet to easily come out of the holder simply remove one of the tensioner spacers and now your tablet can come in and out freely. - Anti-scratch Design The inside of the iFit series holder has a custom stamped out flocking material adhered to the Lexan that allows your iPad to easily slide in and out of the holder and prevent your iPad from getting scratched up over time. - Our Fit series holders are manufactured to be able to adjust the width, height and depth of your holder to accommodate your tablet. Adjust the included spacers with your holder to create a nice fit around your tablet. - Cut outs for access to controls and ports - Heavy Duty Arm All of the cup holder mounts come with a heavy duty aluminum arm that can be adjusted to whatever angle you like to have your tablet. - Quick Removal The cup holder mount is the best solution to quickly have a tablet in your vehicle. The cup holder mounts work great in the front or back seat or in your motorhome. The base on the cup holder expands to fit tight in your cup holder. The range of extension of the base is from 2.44 inches to 3.55 inches in diameter. Simply twist the top of the holder to expand or retract the base. - 9" Arm The Padholdr Fit series is our collection of stylish looking tablet holders that Fit all of your tablet holder needs in one design. The Fit series have several key features that make them very universal for whatever tablet holder application you might need. The Fit Medium series is designed to fit most popular tablets currently on the market with or without slim cases. All Fit series are designed to allow ultimate access to plug ins and necessary buttons on your tablet along with locking and non locking hardware. The Padholdr cup holder kits are the most universal application available to mount a tablet in your car. The Padholdr series stands out from the rest by having an expanding base that allows you to securely fit the base in your cup holder. The cup holder mount also has a heavy duty aluminum arm that allows you to position the holder in any direction you like. Works With Apple iPad; iPad Air iPad 2 iPad with Retina (3rd generation) iPad with lightning port (4th generation) Samsung Galaxy Note 10.1 2014 HP Touchpad Sony Xperia Nook HD + Latte Imuz Motorola Xoom 1 and many more.. (see specifications below and compare with your tablet)
Padholdr iFit Mini Series Tablet Holder Heavy Duty Mount with 24-Inch Arm (PHIFM001S24)
Padholdr iFit Mini Series Tablet Holder Heavy Duty Mount with 24-Inch Arm (PHIFM001S24) Item Condition: New Brand: padholdr Manufacturer: Padholdr Item model number: PHIFM001S24 Product Information - Holder Specifications Tablet Size Range minimum width 7.25" / 184.2 mm to maximum width 8.375" / 212.8 mm minimum height 4.68" / 118.9 mm to maximum height 5.68" / 144.3 mm Works With iPad Mini - Lockable Design Included with each I Fit holder is a set of locking Allen bolts to assemble the holder. To allow the tablet to easily come out of the holder simply remove one of the tensioner spacers and now your tablet can come in and out freely. - Anti-scratch Design The inside of the I Fit series holder has a custom stamped out flocking material adhered to the Lexan that allows your iPad to easily slide in and out of the holder and prevent your iPad from getting scratched up over time. - Works Vertical and Horizontal We designed our I Fit series to be able to work in portrait (horizontal) and landscape (vertical) configurations. - Cut outs for access to controls and ports - All Aluminum top to bottom the heavy duty mounts are manufactured out of all aluminum - Works on Flat and Curved Surfaces With bendable feet you can mount the base of the mount to most curved or flat surfaces including dashboards - 24" Arm - Holder Specifications Tablet Size Range minimum width 7.25" / 184.2 mm to maximum width 8.375" / 212.8 mm minimum height 4.68" / 118.9 mm to maximum height 5.68" / 144.3 mm Works With iPad Mini - Lockable Design Included with each iFit holder is a set of locking Allen bolts to assemble the holder. To allow the tablet to easily come out of the holder simply remove one of the tensioner spacers and now your tablet can come in and out freely. - Anti-scratch Design The inside of the iFit series holder has a custom stamped out flocking material adhered to the Lexan that allows your iPad to easily slide in and out of the holder and prevent your iPad from getting scratched up over time. - Works Vertical and Horizontal We designed our iFit series to be able to work in portrait (horizontal) and landscape (vertical) configurations. If you are looking to have access to portrait and landscape modes frequently purchase our swivel mount accessory. - Cut outs for access to controls and ports - All Aluminum top to bottom the heavy duty mounts are manufactured out of all aluminum - Works on Flat and Curved Surfaces With bendable feet you can mount the base of the mount to most curved or flat surfaces including dashboards - 24" Arm The Padholdr iFit series is our collection of stylish looking tablet holders that Fit all of your iPad holder needs in one design. The Fit series have several key features that make them very universal for whatever tablet holder application you might need. The iFit Mini series is designed to fit the iPad Mini with or without slim cases. All iFit series are designed to allow ultimate access to plug ins and necessary buttons on your iPad along with locking and non locking hardware. The heavy duty mounts are the strongest, well built, mounts in the industry that are designed to mount to any flat or curved surface. The heavy duty mounts come with a 4.125 inch base that allows the 6" arm to be angled in any direction desired. The top of the 6" arm also has an adjustable mounting plate allowing you to position the holder in any desired location. The heavy duty mounts are the most popular for commercial applications including fire, police, medical, taxi, and fleet vehicles
Padholdr iFit Air Series Tablet Holder Medium Duty Mount with 9-Inch Arm (PHIFAMD9)
Padholdr iFit Air Series Tablet Holder Medium Duty Mount with 9-Inch Arm (PHIFAMD9) Item Condition: New Brand: padholdr Manufacturer: Padholdr Item model number: PHIFAMD9 Product Information - Holder Specifications Tablet Size Range width 6.7" / 170.2 mm Works With Apple iPad Air - Lockable Design Included with each iFit holder is a set of locking Allen bolts to assemble the holder. To allow the tablet to easily come out of the holder simply remove one of the tensioner spacers and now your tablet can come in and out freely. - Anti-scratch Design The inside of the iFit series holder has a custom stamped out flocking material adhered to the Lexan that allows your iPad to easily slide in and out of the holder and prevent your iPad from getting scratched up over time. - Works Vertical and Horizontal We designed our iFit series to be able to work in portrait (horizontal) and landscape (vertical) configurations. If you are looking to have access to portrait and landscape modes frequently purchase our swivel mount accessory. - Cut outs for access to controls and ports - Aluminum Shaft and Ends high strength aluminum arm to prevent vibration - Fully Adjustable Ends Each end of the medium duty mount has a fully adjustable clamp allowing you to position the tablet wherever is needed. - Replaceable Bolts for Security For a more secure option replace the wing bolts with Allen bolts included with the kit. This is a great idea if you want to leave the mount in a certain position without having it tampered with. The Padholdr iFit series is our collection of stylish looking tablet holders that Fit all of your iPad holder needs in one design. The Fit series have several key features that make them very universal for whatever iPad holder application you might need. The iFit Air series is designed to fit the iPad Air without a case. All iFit series are designed to allow ultimate access to plug ins and necessary buttons on your iPad along with locking hardware. The medium duty mounts are a great solution if you need to mount your tablet to a flat surface and you have a small area to mount the base to. The medium duty mounts come with a small footprint base plate and two fully adjustable ends allowing you to position the tablet in any angle you desire.
Padholdr Social Series Premium Tablet Dash Kit for 01-07 Dodge Caravan and Grand Caravan
Fits: 2001 - 2007 Dodge Caravan & Grand Caravan 7. Inch Tablets Works with: iPad Mini, Galaxy Tab 7, Dell Streak 7, BlackBerry PlayBook, and Other 7 Inch Tablets Includes: Padholdr Tablet Holder, Vehicle Specific Bracket, Fully Adjustable 6. Inch Arm & Complete Instruction Kit Works With Cases The Padholdr in dash kits are the best solution for you to mount a tablet in your car. The dash kits bolt to the dash using factory bolts so you can maintain a clean install with no holes drilled in your dash. The typical install time is 15-20 minutes.
Padholdr Fit Mini iPad Holder Gloss Black Designed specifically for The iPad Mini 1/2/3/4
Works with Apple iPad Mini 1/2/3/4 Works with or without cases on the above iPad models including Otterbox, Lifeproof, and more Assembled with Tamper Proof Hardware to keep the iPad secure while in the holder Mounts to any mount that has the AMPS, VESA 75mm or VESA 100mm bolt pattern Remove spacers on the side of the tablet to easily slide the tablet in and out of the holder The Fit Mini tablet holder is specifically designed to fit all Apple iPad Mini's including iPad Mini 1/2/3/4 with or without cases installed on them. The Mini holder is designed to accommodate a large variety of iPad cases ranging from slim cases to bulky cases like the Otterbox Defender or LifeProof NUUD.
Padholdr Social Series Premium Tablet Dash Kit for 06-10 Volkswagen Passat/Wagon and 09-12 CC
Fits: 2009 - 2012 Volkswagen CCFits: 2006 - 2010 Volkswagen Passat & 2007 - 2010 Passat WagonWorks with: iPad Mini, Galaxy Tab 7, Dell Streak 7, BlackBerry PlayBook, and Other 7 Inch TabletsIncludes: Padholdr Tablet Holder, Vehicle Specific Bracket, Fully Adjustable 6. Inch Arm & Complete Instruction KitWorks With Cases & 7. Inch TabletsThe Padholdr in dash kits are the best solution for you to mount a tablet in your car. The dash kits bolt to the dash using factory bolts so you can maintain a clean install with no holes drilled in your dash. The typical install time is 15-20 minutes.
Padholdr Pro Series GT 9.7 Holder Built specifically for The Galaxy Tab 9.7 with Lock in Front
Padholdr Pro Series GT 9.7 Holder Built specifically for The Galaxy Tab 9.7 with Lock in Front Item Condition: New Brand: padholdr Manufacturer: PadHoldr Item model number: PHPGT97-MB Color: Matte Black Size: Lock on Faceplate Product Information - Designed Specifically for the Galaxy Tab 9.7 tablets so all buttons, ports, cameras, and more are all accessible - Adjustable design to work with or without cases on your Galaxy Tab - Holder is assembled with Tamper Proof Hardware making it difficult to disassemble without the correct tools - Includes Push type lock located on the front of the holder. Simply use the included key to slide the tablet out of the holder - Includes the VESA 75, VESA 100, and AMPS mounting patterns The Pro Series line of holders is one of our most secure. With a mechanical lock and assembled with tamper-resistant hardware you can leave your tablet in high-traffic areas worry free. The GT 9.7 model has been designed specifically to fit the new Samsung Galaxy Tab A and Tab S2 9.7" tablets. Built in to the the holder are the widely used VESA MIS-D (75mm and 100mm) and AMPS mounting patterns allowing you to mount your holder on one of our many mounting systems or on any compatible mount.
Samsung Galaxy Tab S2 9.7 Holder with Covered Home Button and Covered Camera Black S Line Series by Padholdr
Samsung Galaxy Tab S2 9.7 Holder with Covered Home Button and Covered Camera Black S Line Series by Padholdr Item Condition: New Brand: padholdr Manufacturer: Padholdr Item model number: PHS200-B Color: Black Size: Covered Home Button Covered Camera Product Information - Works with Samsung Galaxy Tab S2 9.7 - VESA 75mm and 100mm bolt patterns - Steel faceplate for ultimate protection - Push style lock integrated into holder, along with Kensington option - Optional Swivel Mount available to rotate tablet portrait or landscape The S-Line series of tablet mounts and stands incorporates a stylish look but still gives high security to multiple tablets. The Tab 9 holder can be ordered with several configurations depending if you want the camera and home button exposed or covered. The Tab 9 is available in a high gloss white or black finish that is injection molded to prevent from scratching while in high traffic areas.
Padholder Edge Series Premium Tablet Dash Kit 2003-2007 Cadillac CTS & SRX for iPad & Other Tablets
Fits: 2003 - 2007 Cadillac CTS Fits: 2004 - 2006 Cadillac SRX Works with: all iPad's except mini, Xoom 1, 2, Galaxy Tab 10.1, Asus Transformer, Acer Iconia A500, HP TouchPad, Otterbox Cases, Life Proof Cases, Thrive, Gateway A60 & More Includes: Padholdr Tablet Holder, Vehicle Specific Bracket, Fully Adjustable 6. Inch Arm, Anti Vibration Backing & Complete Instruction Kit Works with Heavy Duty Cases The Padholdr in dash kits are the best solution for you to mount a tablet in your car. The dash kits bolt to the dash using factory bolts so you can maintain a clean install with no holes drilled in your dash. The typical install time is 15-20 minutes.
Universal Medium Duty Tablet Mount with 9 Inch Arm
9" Length with two adjustable ends Aluminum Shaft and Clamps Ball Mount Design allows you to put the tablet holder in any direction desired The medium duty mounts are a great solution if you need to mount your tablet to a flat surface and you have a small area to mount the base to. The medium duty mounts come with a small footprint base plate and two fully adjustable ends allowing you to position the tablet in any angle you desire. This arm is 9" long from one end to the other.
Fork Lift Tablet Mount Without Arm
Does not include arm to bolt to tablet holder. If you don't have the arm, you must purchase another variant of this itemIndustrial strength design that works great in high traffic areasWill clamp on to square tubing up to 2.875" thickArm Base rotates 360 degrees and angles 110 degreesMade in USAOur Universal Fork Lift Mount designed for tablets is a great solution if you are looking for a way to mount a tablet, or other All in one computer to a forklift without drilling any holes. The forklift mount comes with all of the necessary hardware to clamp to the forklift frame, and will clamp to square tubing up to 2.875" wide. The mount is powder coated black, and made out of a very high strength steel. NOTE this forklift mount does not come with an arm to attach to your tablet or tablet holder and must be purchased separately.
Edge Series Social Tablet Holder Matte White
Edge Series Social Tablet Holder Matte White Item Condition: New Brand: padholdr Manufacturer: PadHoldr Item model number: PHES-MW Color: Matte White Product Information U Shaped Design for Quick Removal Works with Tablets from 7.25 to 8.15 inches wide and. 75" Thick Works with or without Cases Easily Access Buttons and Ports on Tablets The Edge Series is our most popular series of holders for personal use. These non-locking holders allow for quick installation and removal of the tablet in a home personal vehicle or any environment that doesn’t require the tablet be constantly secured. The Edge Social is designed to accommodate tablets with 7" to 8" screens. The unique U-shaped design allows access to controls cameras and ports as well as access to items behind the holder when no tablet is installed.
Tablet Holder Stand 30 inch Tall
Tablet Holder Stand 30 inch Tall Item Condition: New Brand: padholdr Manufacturer: PadHoldr Item model number: STD. 30 Color: Tablet Holders with AMPS Mounting Pattern Size: Swivel: No Product Information - 30 Inch Tall Stand Works Great Next to a Bed - High Strength Flexible Arm doesnt Sag Over Time - AMPS Mounting Pattern Allows Stand to be Universal to Most Tablet Holders - Made in the USA Padholdr manufactures several types of tablet stands that allow you to choose a stand specifically to fit your needs. Each stand is manufactured in the USA and is assembled using high grade materials. The 30 inch stand comes with a steel base plate, a rigid (non flexible) 14 inch arm, and a flexible 16" arm. The tablet floor stand is designed to work with any tablet holder that uses the AMPS mounting pattern, however we recommend going with our Padholdr Tablet holders of course! The floor plate is powder coated black, and the arms are coated with a black vinyl.
Padholder Edge Series Premium Tablet Dash Kit 2001-2002 GMC G Series Van & Savana for iPad & Other Tablets
Fits: 2001 - 2002 GMC G Series Van & Savana Has Anti-Vibration Control Works with: all iPad's except mini, Xoom 1, 2, Galaxy Tab 10.1, Asus Transformer, Acer Iconia A500, HP TouchPad, Otterbox Cases, Life Proof Cases, Thrive, Gateway A60 & More Includes: Padholdr Tablet Holder, Vehicle Specific Bracket, Fully Adjustable 6. Inch Arm, Anti Vibration Backing & Complete Instruction Kit Works with Cases Product Packaging: Standard Packaging The Padholdr in dash kits are the best solution for you to mount a tablet in your car. The dash kits bolt to the dash using factory bolts so you can maintain a clean install with no holes drilled in your dash. The typical install time is 15-20 minutes.
Padholder Eco Series iPad Dash Kit without Charging Dock for 2005.5-2012 Volkswagen Vehicles
Fits: 2007 - 2012 Volkswagen EOS, 2008 - 2009 GLI, 2006 - 2011 GTI & 2010 - 2011 GolfFits: 2005.5 -2010 Volkswagen Jetta Sedan, 2006 - 2011 Jetta Sport Wagon, 2008 R32 & 2006 - 2009 RabbitWorks with: iPad 2 and iPad 3 without Lightning PortIncludes: Padholdr Tablet Holder, Vehicle Specific Bracket, Fully Adjustable 6. Inch Arm & Complete Instruction KitDoes Not Work with CasesProduct Packaging:Standard Packaging The Padholdr in dash kits are the best solution for you to mount a tablet in your car. The dash kits bolt to the dash using factory bolts so you can maintain a clean install with no holes drilled in your dash. The typical install time is 15-20 minutes.
Pro Series 10 Tablet Holder with Lock on Backplate
Pro Series 10 Tablet Holder with Lock on Backplate Item Condition: New Brand: padholdr Manufacturer: PadHoldr Item model number: PHP10R-GB Color: Gloss Black Size: Lock on Backplate Product Information - Manufactured out of Black High Gloss Acrylic - Works with tablets 9.28 to 10.64 inches wide, by 6.47 to 7.75 inches tall, and up to. 94" thick - Designed to work with most 10" tablets including Galaxy Tab, Surface, Lenovo tablets, and many more - Adjustable to work with or without cases on your tablet - Works with Mounts that have the VESA 75mm, 100mm, and AMPS Mounting Patterns The Pro Series line of holders is one of our most secure. With a mechanical lock and assembled with tamper-resistant hardware you can leave your tablet in high-traffic areas worry free. The Pro 10 model is designed to accommodate 10-inch tablets like the Samsung Galaxy Tab 10.1. Built in to the the holder are the widely used VESA MIS-D (75mm and 100mm) and AMPS mounting patterns allowing you to mount your holder on one of our many mounting systems or on any compatible mount.
