Polsen PL-4 Omnidirectional Lavalier Microphone with 1/8"" (3.5 mm) Connector
Omnidirectional Polar Pattern | Ideal for Video ApplicationsUse With Wireless Sys With 1/8" Input | Use With Recorders With Plug-In PowerIncludes Tie Clip | Includes WindscreenWhat's In The Box: Tie Clip, Windscreen, Limited 1-Year WarrantyThe Polsen PL-4 is a replacement microphone for Polsen's ULW-16 wireless system. It is also compatible with other wireless transmitters with a standard 1/8" microphone input, or devices that have a 1/8" (3.5 mm) input with plug-in power. Featuring an omnidirectional polar pattern, the PL-4 is optimized to accurately capture speech. It provides clear and natural sound ideal for ENG, EFP, and DSLR video applications. Because omnidirectional microphones are less susceptible to wind noise and vocal plosives (pops) than cardioid microphones, the PL-4 is suitable for indoor or outdoor use. The mic provides flexible placement options and allows for head movement without affecting the sound. The PL-4 comes packaged with a tie clip for securing the mic to the talent's clothing, as well as a windscreen for further reducing wind noise and vocal plosives. Omnidirectional Polar PatternThe omnidirectional polar pattern is ideal for video applications and allows for head movement without affecting the sound. It also makes the microphone less susceptible to picking up wind noise and vocal plosives (pops)1/8" (3.5 mm) InputThe PL-4 is a replacement microphone for the ULW-16 wireless system. It is also compatible with devices with 1/8" (3.5 mm) input with plug-in powerDesigned for SpeechOptimized to capture speech, the PL-4 provides a clear and natural sound in a variety of recording situations Transducer: Back electret condenser Polar Pattern: Omnidirectional Frequency Response: 20 Hz to 20 kHz Sensitivity: -45 dB ±3 dB Impedance: 2000 O Maximum SPL: 135 dB Dynamic Range: 104 dB Operating Voltage: 1.5V - 12V DC Connector: 1/8" (3.5 mm) Head Diameter: 0.20" (5.0 mm)
polsen hdr10 omnidirectional handheld dynamic eng microphone
The Polsen HDR-10 is a handheld omnidirectional dynamic microphone that uniformly captures sound on- or off-axis. This makes it ideal for audio and video applications like ENG and interviews, because it can pick up sound in a 360 pattern. The frequency response is tailored for speech, resulting in a naturalsound with clear dialogue intelligibility. The capsule is isolated in rubber to reduce handling noise, and the integrated metal mesh windscreen and included foam windscreen lower wind noise and plosive sounds. The body of the microphone is constructed from cast aluminum alloy to provide durability and a professional appearance.Designed for ENGIdeal for audio and video applications like electronic news gathering (ENG) and interviews360 Sound PickupOmnidirectional capsule picks up sound in a 360 pattern to uniformly capture sound on- or off-axisTailored for SpeechFrequency response is tailored for speech, resulting in a natural sound with intelligible dialogueMetal and Foam WindscreensIntegrated metal mesh windscreen and included foam windscreen reduce undesirable wind noise andvocal plosive soundsIncludes Mic ClipMicrophone clip with 5/8" thread and 3/8" reducer bushing for versatile mountingDrawstring PouchDrawstring pouch included for safe storage and transportTransducer: DynamicPolar Pattern: OmnidirectionalFrequency Response: 50 Hz to 15 kHzSensitivity: -53 dB/Pa (2.2 mV/Pa) 3 dB, 1 Pa = 94 dB SPLImpedance: 500 OhmsConnector: XLR maleMaterial: Cast aluminum alloyDimensions: 1.34 x 7.09 x 0.83" (34 x 180 x 21 mm)Weight: 4 oz (113 g)UPC NO:847628572577 SKU:ADIB00KAI3L08
Polsen OLM-10 Omnidirectional Lavalier Microphone (2 Pack)
Self-Powered Electret Condenser Mic | Omnidirectional Polar Pattern | 3.5mm TRS Dual Mono ConnectorSends Audio to Left & Right Channels | Accurate Voice Reproduction | Lightweight, Discrete Design20' Cable | In-Line Power Switch | For Most Devices with 3.5mm Mic InputIncludes Tie Clip, Windscreen, & BatteryIn The Box: 3.5mm to 1/4" Adapter, Tie Clip, Foam Windscreen, LR44 Battery, Limited 1-Year WarrantyThe Polsen OLM-10 Omnidirectional Lavalier Microphone is an all-in-one solution for recording hands-free audio to both channels of your camcorder or DSLR as well as most devices with a 3.5mm mic-level input that cannot supply phantom power. It is a self-powered clip-on electret condenser mic designed for accurate voice reproduction in home and video webcasting applications such as presentations, interviews, dictation, and corporate video. The microphone's small, 21mm-long lightweight body allows for discrete placement with the included tie-clip while its 20-foot long cable gives you ample distance from your recording device. Featuring a 3.5mm dual mono TRS output connector, the mic sends audio to both the left and right channels of your recorder. Thanks to its omnidirectional polar pattern, the OLM-10 provides a uniform response that will not cause the bass-boosting proximity effect common with cardioid patterns, while allowing you to move freely without off-axis rejection causing a drop in volume. The in-line power switch allows you to quickly mute the microphone as well as preserve battery life when not in use. A windscreen for reduced noise and plosives, 1/4" adapter, and LR44 battery are included.Transducer: Electret condenserPolar Pattern: OmnidirectionalFrequency Response: 50 Hz to 18 kHzSensitivity: -65 dB +/- 3 dB (0 dB = 1 V/ubar @ 1 kHz)Impedance: 1 k & #937Operating Voltage: 1 to 10 V DCMaterial: Gold stereo plugCable Length: 20' (6 m)Capsule Diameter: 0.2" (7.5 mm)Length: Microphone: 0.8" (21 mm)
POCAM2WCLC_New14_0717
Secures PL-2WC Lavalier to LapelThis Polsen Replacement Lavalier Clip for the CAM-2WC Wireless System is used to secure the system's PL-2WC lavalier mic to the talent's clothing for use in ENG, public speaking, interviews, and similar applications.
polsen ulwbc battery cover for ulw16 wireless receiver and transmitter
The Polsen ULW-BC is a replacement battery cover for the Polsen ULW-16-PL4 and ULW-16-PL5 camera-mountable wireless systems. The battery cover can be used with either the belt-pack transmitter or the camera-mount receiver.UPC NO:847628577350 SKU:ADIB01L7P42BY
polsen cam2blt belt clip for cam2w wireless bodypack transmitter
The Polsen CAM2-BLT is a replacement belt clip for the Polsen CAM-2W camera-mountable wireless systems. It attaches to the transmitter of the CAM-2W and securely holds it in place on a belt or inner pocket. It is an ideal accessory to conceal the transmitter under clothing or a costume.UPC NO:847628577091 SKU:ADIB00LWBPHAO
polsen olm20 dual omnidirectional lavalier microphone
Designed for recording interviews, the OLM-20 Dual Omnidirectional Lavalier Microphone from Polsen is comprised of two of the well-received OLM-10 omnidirectional lavalier microphones. It terminates in a single 1/8" stereo connector, with each microphone recording to a discrete channel on your DSLR, camcorder, or audio recorder with a microphone input. Not limited to just interview applications, the OLM-20 can be used for presentations, podcasts, webcasts, or any situation where more than one subject needs to be recorded. The OLM-20's dual electret condenser capsules are designed to deliver clear and natural sound, with their omnidirectional polar pattern providing off-axis response, even if the subject turns their head while talking. Both mics offer low sensitivity to wind and handling noise, as well as vocal plosives. Thanks to its battery-operated design, the OLM-20 can be used with any camera or recorder that supports a 1/8" stereo mic level input, without the need for additional equipment or adapters. Each microphone records to a discrete channel, and the microphones themselves are labeled left and right. Its 13.5' cable provides 10' of distance between each microphone for comfortable placement, while the included tie clips allow for hands-free use.UPC NO:847628578777 SKU:ADIB00V92Y6EY
