Buy Roby Technology Co Limited Products online in United States

Sort by
4 Units - PCI Express (PCI-E,PCIe) 8X Riser Adapter Riser Card,Extension Adapter to Protect Slot
Interface: PCI Express (PCI-E) 8x Users may use this item to protect your slot if users plug PCIE slot frequently. For example, if you are testing many PCIE cards, you need this item to protect your slot. Brand new and high quality No need to set jumpers or drive Plug and play. Specifications: Material: Plastic, Electronic Parts
Roby Technology Co., Limited
4 Units - PCI Express (PCI-E,PCIe) 8X Riser Adapter Riser Card,Extension Adapter to Protect Slot
Punch Down Tool Kit for RJ45 Network Cable Punch Down Keystone Jack,Cat5e Cat6 Cat7 Wire Ethernet Cable
The punch down tool is a small hand tool, for telecom and network technicians. It is used for punching wires into telephone Socket, keystone jacks,punch down blocks or patch panels. The punch down tool features an impact function to ensure the wires are properly set and cut. Features : Punch-down tool connecting keystone jacks with 110 type connectors. It can supports Cat3, Cat5, Cat5e, Cat6, Cat7 ,RJ45 network Ethernet cable and voice telephone wire. The blade also is usually used to cut off excess wire, in the same operation as making the connection. Impact-style tool with lock sockets accommodates most blades for punch-down tools. Package Includes: 1 x Punch Down Tool
Roby Technology Co., Limited
Punch Down Tool Kit for RJ45 Network Cable Punch Down Keystone Jack,Cat5e Cat6 Cat7 Wire Ethernet Cable
Analog Asterisk Card TDM410E AEX410 with 1 FXO+3 FXS ports,PCI Express + Echo Cancellation Port, Support Asterisk / Elastix /FreePBX,aex410p,tdm410p,tdm400p
Purchase Notice: 1). The card is with 1 FXO+3 FXS modules. 2). The card is with PCI Express (PCI-E) connector. 3). It supports Asterisk,Issabel,AsteriskNow,Freepbx,...Dahdi driver.You can build a telephone solution / IP PBX / call center /SIP server based on the card easily at a very low cost. Description : Using the card, open source Asterisk PBX and stand alone PC, users can create their SOHO telephony solution,IP PBX,call center include all the sophisticated features of traditional PBX, and extend features such as voice mail,IVR,Call meeting,SIP trunk,outbound route,inbound route,call waiting ,call forwarding ... It supports standard dahdi / zaptel drivers , can work with Asterisk / FreePbx / Issabel /AsteriskNow Dahdi... Specification: The card is bundled with 4 FXO or FXS modules. The FXO module is in red and the FXS model is in green . FXO port connects to PSTN line and the FXS port connects to the telephone. Issabel, AsteriskNow, Freepbx Settings: [Issabel.localdomain ~]# dahdi_genconf [Issabel.localdomain ~]# dahdi_cfg -vvvv DAHDI Tools Version - 2.2.0 DAHDI Version: 2.2.0 Echo Canceller(s): MG2 Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01) Channel 02: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 02) Channel 03: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 03) Channel 04: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 04) [Issabel.localdomain ~]# asterisk -vvr Issabel*CLI & gt; dahdi show channels pseudo default en default In Service 1 from-pstn en default In Service 2 from-pstn en default In Service 3 from-pstn en default In Service 4 from-pstn en default In Service ------------------------------------------------ Refer to, https://www.freepbx.org/ https://www.issabel.org/ https://www.asterisk.org/
Roby Technology Co., Limited
Analog Asterisk Card TDM410E AEX410 with 1 FXO+3 FXS ports,PCI Express + Echo Cancellation Port, Support Asterisk / Elastix /FreePBX,aex410p,tdm410p,tdm400p
Asterisk Card TDM410P with 3 FXO+1 FXS Modules,Supports Asterisk Elastix FreePbx Dahdi,PCI FXS FXO Card tdm400p For VoIP Gateway PBX SIP phone ip pbx Telephone system
Description : TDM410P Asterisk card supports up to four FXO/FXS ports, plug and play. Using TDM410P asterisk card, open source Asterisk PBX and stand alone PC, users can create their SOHO telephony solution include all the sophisticated features of traditional PBX, and extend features such as voicemail in IP PBX. It supports standard dahdi / zaptel drivers , can work with Asterisk / FreePbx / Issabel/ AsteriskNow... Specification: The PCI card is bundled with 4 FXO or FXS modules. The FXO module is in red and the FXS model is in green . FXO port connects to PSTN line and the FXS port connects to the telephone. You can get any combination of FXO & FXS modules with the same price,no any additional cost. Please specify what configuration you need when purchase. Issabel / FreePBX / Asterisk: [Issabel .localdomain ~]# dahdi_genconf [Issabel .localdomain ~]# dahdi_cfg -vvvv DAHDI Tools Version - 2.2.0 DAHDI Version: 2.2.0 Echo Canceller(s): MG2 Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 03) Channel 04: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 04) [Issabel .localdomain ~]# asterisk -vr Issabel *CLI> dahdi show channels Chan Extension Context Language MOH Interpret Blocked State pseudo default en default In Service 1 from-pstn en default In Service 2 from-pstn en default In Service 3 from-pstn en default In Service 4 from-pstn en default In Service Issabel *CLI> dahdi show status Description Alarms IRQ bpviol CRC4 Fra Codi Options LBO Wildcard TDM410P Board 1 OK 1 0 0 CAS Unk YEL 0 db (CSU)/0-133 feet (DSX-1)
Roby Technology Co., Limited
Asterisk Card TDM410P with 3 FXO+1 FXS Modules,Supports Asterisk Elastix FreePbx Dahdi,PCI FXS FXO Card tdm400p For VoIP Gateway PBX SIP phone ip pbx Telephone system
Wholesale 1000 units- RJ11 6P4C Phone Cord Connectors RJ11 Plug Telephone Modular,RJ11 Connector,Telephone Line Jack
RJ11 plug connector is used for the telephone cable. Type: 6p4c 6P4C means that the contacts on the plugs have 6 positions, of which 4 gold-plated contacts are placed. The RJ11 plugs are suitable for telephone lines, phone cord in home or office. Package Included: 1000 x RJ11 Plugs
Roby Technology Co., Limited
Wholesale  1000 units- RJ11 6P4C Phone Cord Connectors RJ11 Plug Telephone Modular,RJ11 Connector,Telephone Line Jack
8 Port PCI-E Asterisk Card with 4 FXO+4FXS Ports,with Echo Cancellation hardware,Supports Asterisk FreePBX Issabel AsteriskNow Dahdi,tdm800 tdm410p tdm400p
Purchase Notice: 1). The card is with 4 FXO+4FXS ports, with Echo Cancellation Hardware. 2). The card is with PCI-E connector. 3). It supports Asterisk,Issabel,AsteriskNow,Freepbx,...Dahdi driver.You can build a telephone solution / IP PBX / call center /SIP server based on the card easily at a very low cost. Description : Using the card, open source Asterisk PBX and stand alone PC, users can create their SOHO telephony solution,IP PBX,call center include all the sophisticated features of traditional PBX, and extend features such as voice mail,IVR,Call meeting,SIP trunk,outbound route,inbound route,call waiting ,call forwarding ... It supports standard dahdi / zaptel drivers , can work with Asterisk / FreePbx / Elastix / Issabel /AsteriskNow Dahdi... Specification: The card is bundled with 8 FXO or FXS ports. The FXO module is in red and the FXS model is in green . FXO port connects to PSTN line and the FXS port connects to the telephone. Issabel, AsteriskNow, Freepbx Settings: [Issabel.localdomain ~]# dahdi_genconf [Issabel.localdomain ~]# dahdi_cfg -vvvv DAHDI Tools Version - 2.2.0 DAHDI Version: 2.2.0 Echo Canceller(s): MG2 Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 03) Channel 04: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 04) Channel 05: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 05) Channel 06: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 06) Channel 07: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 07) Channel 08: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 08) [Issabel.localdomain ~]# asterisk -vvr Issabel*CLI & gt; dahdi show channels pseudo default en default In Service 1 from-pstn en default In Service 2 from-pstn en default In Service 3 from-pstn en default In Service 4 from-pstn en default In Service 5 from-pstn en default In Service 6 from-pstn en default In Service 7 from-pstn en default In Service 8 from-pstn en default In Service ------------------------------------------------ Refer to, https://www.freepbx.org/ https://www.issabel.org/ https://www.asterisk.org/
Roby Technology Co., Limited
8 Port PCI-E Asterisk Card with 4 FXO+4FXS Ports,with Echo Cancellation hardware,Supports Asterisk FreePBX Issabel AsteriskNow Dahdi,tdm800 tdm410p tdm400p
1 Unit - 1m 3ft BNC Cable - Female to Female CCTV Extension Coaxial Cable,Supports ISDN E1 T1 cable
Design: BNC Female to Female Length: around 1m / 3.3 ft Material: Metal and Plastic BNC Female Q9 Outer Size: 4.6 x 1.3 cm/ 1.8" x 0.51" (L*Max. D) This BNC cable for video applications including CCTV, T1/E1 card, broadcast, studio, boardroom presentations, home theater and so on. Finished with bright nickel-plated BNC connectors that have molded PVC strain relief to protect the cable.
Roby Technology Co., Limited
1 Unit - 1m 3ft BNC Cable - Female to Female CCTV Extension Coaxial Cable,Supports ISDN E1 T1 cable
3 FXS+1 FXO Card,TDM400 with Low Profile for 2U,with PCI-E connector,FXS card FXO card Asterisk Card Sangoma FreePBX,tdm410p tdm400p,For IP PBX VoIP Phone System Asterisk voip
Purchase Notice: 1). The card is with 1FXO 3FXS modules. 2). The card is with PCIe connector. 3). It supports Asterisk,Issabel,AsteriskNow,Freepbx,...Dahdi driver.You can build a telephone solution / IP PBX / call center /SIP server based on the card easily at a very low cost. Description : Using the card, open source Asterisk PBX and stand alone PC, users can create their SOHO telephony solution,IP PBX,call center include all the sophisticated features of traditional PBX, and extend features such as voice mail,IVR,Call meeting,SIP trunk,outbound route,inbound route,call waiting ,call forwarding ... It supports standard dahdi / zaptel drivers , can work with Asterisk / FreePbx / Issabel /AsteriskNow Dahdi... Specification: The card is bundled with 4 FXO/FXS modules. The FXO module is in red and the FXS model is in green . FXO port connects to PSTN line and the FXS port connects to the telephone. Issabel, AsteriskNow, Freepbx Settings: [Issabel.localdomain ~]# dahdi_genconf [Issabel.localdomain ~]# dahdi_cfg -vvvv DAHDI Tools Version - 2.2.0 DAHDI Version: 2.2.0 Echo Canceller(s): MG2 Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01) Channel 02: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 02) Channel 03: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 03) Channel 04: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 04) ------------------------------------------------ Refer to, https://www.freepbx.org/ https://www.issabel.org/ https://www.asterisk.org/
Roby Technology Co., Limited
3 FXS+1 FXO Card,TDM400 with Low Profile for 2U,with PCI-E connector,FXS card FXO card Asterisk Card Sangoma FreePBX,tdm410p tdm400p,For IP PBX VoIP Phone System Asterisk voip
TDM400P Asterisk Card with 2 FXS 2 FXO Modules,Voice Board Supports digium asterisk Sangoma FreePBX and Issabel
Purchase Notice: 1). The card is with 2 FXO 2 FXS modules. 2). The card is with PCI connector. 3). It supports Asterisk,Issabel,AsteriskNow,Freepbx,...Dahdi driver.You can build a telephone solution / IP PBX / call center /SIP server based on the card easily at a very low cost.- FXO port connects to PSTN line and the FXS port connects to the telephone. Description : Using the card, open source Asterisk PBX and stand alone PC, users can create their SOHO telephony solution,IP PBX,call center include all the sophisticated features of traditional PBX, and extend features such as voice mail,IVR,Call meeting,SIP trunk,outbound route,inbound route,call waiting ,call forwarding ... It supports standard dahdi / zaptel drivers , can work with Asterisk / FreePbx / Issabel /AsteriskNow Dahdi... Specification: The card is bundled with 4 FXO or FXS modules. The FXO module is in red and the FXS model is in green . FXO port connects to PSTN line and the FXS port connects to the telephone. Issabel, AsteriskNow, Freepbx Settings: [Issabel.localdomain ~]# dahdi_genconf [Issabel.localdomain ~]# dahdi_cfg -vvvv DAHDI Tools Version - 2.2.0 DAHDI Version: 2.2.0 Echo Canceller(s): MG2 Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 02) Channel 03: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 03) Channel 04: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 04) [Issabel.localdomain ~]# asterisk -vvr Issabel*CLI & gt; dahdi show channels pseudo default en default In Service 1 from-pstn en default In Service 2 from-pstn en default In Service 3 from-pstn en default In Service 4 from-pstn en default In Service ------------------------------------------------ Refer to, https://www.freepbx.org/ https://www.issabel.org/ https://www.asterisk.org/
Roby Technology Co., Limited
TDM400P Asterisk Card with 2 FXS 2 FXO Modules,Voice Board Supports digium asterisk Sangoma FreePBX and Issabel
200 units - RJ45 Connectors,RJ-45 Plugs For Network Cable,RJ45 Cable,RJ45 Plugs,RJ48 RJ45 Crystal Head,CAT6 CAT5 CAT5E 8p8c
For CAT5 CAT5E CAT6 Solid or Stranded Ethernet Cable RJ45 plug connector is used for Ethernet (LAN, WAN, Network) cable. Type: 8p8c UTP Solid Crimp Connector Crystal Package Included: 200 x RJ45 Plugs
Roby Technology Co., Limited
200 units - RJ45 Connectors,RJ-45 Plugs For Network Cable,RJ45 Cable,RJ45 Plugs,RJ48 RJ45 Crystal Head,CAT6 CAT5 CAT5E 8p8c
Asterisk FXO Card TDM410P with Echo Canceller Hardware,4 FXO Port PCI Card,tdm400p,tdm410,digium FXO analog board For Asterisk PBX SIP Phone PABX Telephone System Supports Sangoma FreePBX
Purchase Notice: 1). The card is with 4 FXO modules. 2). The card is with PCI connector. 3). It supports Asterisk,Issabel,AsteriskNow,Freepbx,...Dahdi driver.You can build a telephone solution / IP PBX / call center /SIP server based on the card easily at a very low cost. Description : Using the card, open source Asterisk PBX and stand alone PC, users can create their SOHO telephony solution,IP PBX,call center include all the sophisticated features of traditional PBX, and extend features such as voice mail,IVR,Call meeting,SIP trunk,outbound route,inbound route,call waiting ,call forwarding ... It supports standard dahdi / zaptel drivers , can work with Asterisk / FreePbx / Elastix / Issabel /AsteriskNow Dahdi... Specification: The card is bundled with 4 FXO or FXS modules. The FXO module is in red and the FXS model is in green . FXO port connects to PSTN line and the FXS port connects to the telephone. Issabel, AsteriskNow, Freepbx Settings: [Issabel.localdomain ~]# dahdi_genconf [Issabel.localdomain ~]# dahdi_cfg -vvvv DAHDI Tools Version - 2.2.0 DAHDI Version: 2.2.0 Echo Canceller(s): MG2 Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 03) Channel 04: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 04) [Issabel.localdomain ~]# asterisk -vvr Issabel*CLI & gt; dahdi show channels pseudo default en default In Service 1 from-pstn en default In Service 2 from-pstn en default In Service 3 from-pstn en default In Service 4 from-pstn en default In Service ------------------------------------------------ Refer to, https://www.freepbx.org/ https://www.issabel.org/ https://www.asterisk.org/
Roby Technology Co., Limited
Asterisk FXO Card TDM410P with Echo Canceller Hardware,4 FXO Port PCI Card,tdm400p,tdm410,digium FXO analog board For Asterisk PBX SIP Phone PABX Telephone System Supports Sangoma FreePBX
Wall Plate with RJ45 + RJ11 + VGA Modules,Phone Cat 3Keystone Connectors Jack / Plug Wall Mount Faceplate Cover
. Package Content: 1 unit Wall Plate. Size: 118 * 72 mm ( 4.65 * 2.83 in) Material: Plastic Color: White Durability The wall plate is made of high quality poly-carbonate thermoplastic material, supports long-term use, elasticity to hold up against hard impacts and heavy force. Easy to install with screws and users can install it easily. White Color Fits Your Home or Office To maintain its neat and discreet design, the wall plate is white color, to maintain a consistent color scheme throughout your home or office. Flexibility Designed for indoor use, Without cables running around, Great replacement for standard home or office wallplates organizing the lines or cables behind the wall for a professional-looking installation. With the wall plate, users need not run cables across the floor......
Roby Technology Co., Limited
Wall Plate with RJ45 + RJ11 + VGA  Modules,Phone Cat 3Keystone Connectors Jack / Plug  Wall Mount Faceplate Cover
Single Port FXS Module S100M S110M For TDM400P TDM410P TDM410E AEX410 ... FXS daughter card FXS Card
S100M Features: 1 Port FXS Module Compatible with TDM400P X100P TDM400P TDM410P AEX410 Cards, etc.
Roby Technology Co., Limited
Single Port FXS Module S100M S110M For TDM400P TDM410P TDM410E AEX410 ... FXS daughter card FXS Card
10 units - PCI Express (PCI-E) 4x Adapter Riser Card 90 Degree For 1U 2U Server Chassis
Brand new and high quality PCI-E 4x Riser Card Mainly applied to the lateral transfer 1U server chassis or PCI riser card 90 degree adapter card No need to set jumpers or drive Specifications: Material: Plastic, Electronic Parts
Roby Technology Co., Limited
10 units - PCI Express (PCI-E)  4x Adapter Riser Card 90 Degree For 1U 2U Server Chassis
TE420P Quad Span T1 Card E1 Card,ISDN PRI card with 4 Ports,PCI Connector TE405 TE410 TE110,te110p
Quick summary: The TE420P 4 port E1/T1/J1 card , with PCI connector , will work in any country using E1 T1 or J1 circuits. Connect it to any digital PBX with these ports available, your local telco or T1/E1 channels banks. Supports Asterisk / Issabel / AsteriskNow / Freepbx... E1 circuits are used in Europe, Asia, Middle East and South America T1 circuits are used in USA, Canada J1 circuits are used in Japan Item Description: TE420P ,The 4 port E1/T1/J1 card supports E1, T1 and J1 circuits and it is selectable on a per-card or per-port basis. This feature enables signaling translation between E1 and T1 equipment and allows inexpensive T1 channel banks to connect with E1 circuits. With the improved I/O speed, the card reduces CPU usage and increases card density per server. The card is fully compatible with Asterisk softswitch. Also, the open source driver supports an API interface for custom application development. The The 4 port E1/T1/J1 card supports industry standard telephony voice and data protocols, including Primary Rate ISDN (both North American - National/DMS and Standard EuroISDN), SS7 signalling, analog over digital such as E & M, E & M Wink, R2 CAS, FXS/FXO loopstart and other less known voice protocol families, PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and trunk-side interfaces are supported, also included are advanced call features. Target applications: High performance ISDN PCI cards ISDN LAN routers for PRI ISDN least cost routers for PRI ISDN test equipment for PRI ISDN PABX for PRI/PRA VOIP gateways Analog to digital signalisation converters What's included: BRAND NEW The 4 port E1/T1/J1 card TE420P 1 year manufacturer's warranty Email support to get you started
Roby Technology Co., Limited
TE420P Quad Span T1 Card E1 Card,ISDN PRI card with 4 Ports,PCI Connector TE405 TE410 TE110,te110p
1 Unit - SATA III Cable 22 Pin Female to 7 Pin Female Data Cable + 4 Pin Male Power Cable HDD
Q'ty:1 Unit SATA Cable 22 pin( 15+7pin) to 7 pin +4 pin, combines both SATA data cable and SATA power cable . Easy solution for powering a SATA drive from an LP4 connection on the computer power supply It does not need driver,plug and play Slim design, reduce clutter and increase airflow within the computer case
Roby Technology Co., Limited
1 Unit - SATA III Cable 22 Pin Female to 7 Pin Female Data Cable + 4 Pin Male Power Cable HDD
1 Unit - PCI Express (PCI-E) 1x Adapter Riser Card 90 Degree For 1U 2U Server Chassis 90 degree right angle adapter card with PCIe (PCI-e) 1x .
Brand new and high quality PCI-E 1x Riser Card Mainly applied to the lateral transfer 1U server chassis or PCI riser card 90 degree adapter card No need to set jumpers or drive Specifications: Material: Plastic, Electronic Parts
Roby Technology Co., Limited
1 Unit - PCI Express (PCI-E) 1x Adapter Riser Card 90 Degree For 1U 2U Server Chassis 90 degree right angle adapter card with PCIe (PCI-e) 1x .
1 Unit - RJ48 to BNC Convertor Cable For E1 Card,T1 / E1 Cable
RJ48 to BNC Adaptor. It supports T1/E1 cards, such as TE110P, TE220, TE420... Length: Approx. 18.5 cm, Copper Wire Material Performance follow TIA/EIA and ISO Standard Package Including: 5 x RJ48 to BNC Cable
Roby Technology Co., Limited
1 Unit - RJ48 to BNC Convertor Cable For E1 Card,T1 / E1 Cable
10 Pcs- IDE Cable 40 Pin IDE/ATA Hard Drive Ribbon Cable DVD Ribbon Cable For Dual Devices
Q'ty: 10 units Connect 2 IDE devices (Hard drive/DVD) to your motherboard. Specifications: It is 40-pin IDE Ribbon Cable Connect up to 2 IDE/ATA devices(DVD/Hard drive) IDE aka EIDE/PATA/ATA/parallel cable
Roby Technology Co., Limited
10 Pcs- IDE Cable 40 Pin IDE/ATA Hard Drive Ribbon Cable DVD Ribbon Cable For Dual Devices
Asterisk card with 1 T1/E1 Port,with Echo Cancellation module ,supports Asterisk FreePBX Issabel For VoIP Phone System TE110P ISDN ss7 PRI Card
Hot Features, with 1 E1/T1 port ISDN PRI PCI card with Echo Cancellation hardware. Supports Dahdi / Zaptel Supports Asterisk / Issabel / AsteriskNow / Freepbx /Dahdi ... Description: The card T1/E1 card is a single span, selectable T1 (24-channel) or E1 (32-channel) card that supports all the functionality of asterisk. This card supports both voice and data modes on its single span. For example, the card can support 12 channels dedicated to voice and 12 to data while passing all traffic through to the Asterisk PBX, which reliably routes the channels to their designated locations. This eliminates the need for an external router. By utilizing our TDMoE (TDM over Ethernet) technology, one can easily connect multiple PCs equipped with the card and achieve voice quality on par with single PBX implementations. Scalability for this product is derived from adding multiple cards to each individual PC. Add addition cards as you need them for your expanding applications. The card supports industry standard telephony and data protocols, including both RBS and Primary Rate ISDN (PRI) protocol families for voice and PPP, Cisco HDLC, and Frame Relay data modes. The board drives both line-side and trunk-side interfaces, including call features. The card brings a high-performance, cost-effective, and flexible single span togglable T1/PRI or E1/PRI interface to the line-up of telephony interface devices. The card is a compact and powerful interface supporting voice and data transmission over T1, E1, and Primary Rate ISDN (PRI) connections. A low profile, half-length PCI form factor allows this device to fit within a 2U rackmount case or equivalent chassis, offer excellent density for call center, service provider, and other space-sensitive applications. Of course, the card is fully supported open source Asterisk PBX software. Used in conjunction with Asterisk, the card offers the power to create a seamless network, interconnecting traditional telephony systems with the emerging Voice-over IP technologies. It can be used to deliver a wide range of PBX and IVR services to the network or handset including Voicemail, Call Conferencing, Three-Way Calling, and VoIP Gateways. Specification: Data Modes: Cisco HDLC HDLC PPP Multilink PPP Frame Relay Voice Modes: PRI CPE & PRI NET - NI1 - NI2 - EuroISDN - 4ESS (AT & T) - 5ESS (Lucent) - DMS100 E & M - Wink - Feature Group B - Feature Group D FXO & FXS - Ground Start - Loop Start - Loop Start with Disconnect Detect [trixbox1.localdomain ~]# dahdi_test Opened pseudo dahdi interface, measuring accuracy... 99.986% 99.971% 99.982% 99.982% 99.983% 99.979% 99.984% 99.979% 99.984% 99.976% 99.982% 99.982% 99.981% 99.982% 99.982% 99.982% 99.981% 99.981% 99.984% 99.981% 99.982% 99.981% 99.982% 99.983% 99.982% 99.982% 99.981% 99.982% 99.983% 99.982% 99.981% 99.982%
Roby Technology Co., Limited
Asterisk card with 1 T1/E1 Port,with Echo Cancellation module ,supports Asterisk FreePBX Issabel For VoIP Phone System TE110P ISDN ss7 PRI Card
1 Unit - 1m 3ft BNC Cable - Male to Female CCTV Extension Coaxial Cable,Supports ISDN E1 T1 cable
Design: BNC Male to Female Length: around 1m /3.3ft Material: Metal and Plastic BNC Male Q9 Outer Size : 5 x 1.4cm/2" x 0.57"(L*Max.D BNC Female Q9 Outer Size : 4.6 x 1.3cm/1.8" x 0.51" (L*Max.D) This BNC cable for video applications including CCTV, T1/E1 card,broadcast, studio, boardroom presentations, home theater and so on. Finished with bright nickel-plated BNC connectors that have molded PVC strain relief to protect the cable .
Roby Technology Co., Limited
1 Unit - 1m 3ft BNC Cable - Male to Female CCTV Extension Coaxial Cable,Supports ISDN E1 T1 cable
10 Pcs - Molex 4 Pin Power Supply Splitter Cable 3 Female to 1 Male,IDE Internal Power Y-Cable
Q'ty:10 units IDE Molex 4p to 3 IDE Splitter hard disk Power supply Cable It does not need driver,plug and play. Use to add extra power outlets to your power supply for connecting IDE hard drives or CD ROM Pin Molex IDE Male to 3 port IDE Female
Roby Technology Co., Limited
10 Pcs - Molex 4 Pin Power Supply Splitter Cable 3 Female to 1 Male,IDE Internal Power Y-Cable
Asterisk PCI Analog Board with 1 FXO+3FXS,with Echo Canceller Hardware,supports issabel,Freepbx,For Asterisk PBX VoIP PABX Phone System TDM400P TDM410P
Purchase Notice: 1). The card is with 1 FXO+3 FXS modules. 2). The card is with PCI connector. 3). It supports Asterisk,Issabel,AsteriskNow,Freepbx,...Dahdi driver.You can build a telephone solution / IP PBX / call center /SIP server based on the card easily at a very low cost. Description : Using the card, open source Asterisk PBX and stand alone PC, users can create their SOHO telephony solution,IP PBX,call center include all the sophisticated features of traditional PBX, and extend features such as voice mail,IVR,Call meeting,SIP trunk,outbound route,inbound route,call waiting ,call forwarding ... It supports standard dahdi / zaptel drivers , can work with Asterisk / FreePbx / Issabel /AsteriskNow Dahdi... Specification: The card is bundled with 4 FXO or FXS modules. The FXO module is in red and the FXS model is in green . FXO port connects to PSTN line and the FXS port connects to the telephone. Issabel, AsteriskNow, Freepbx Settings: [Issabel.localdomain ~]# dahdi_genconf [Issabel.localdomain ~]# dahdi_cfg -vvvv DAHDI Tools Version - 2.2.0 DAHDI Version: 2.2.0 Echo Canceller(s): MG2 Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01) Channel 02: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 02) Channel 03: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 03) Channel 04: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 04) [Issabel.localdomain ~]# asterisk -vvr Issabel*CLI & gt; dahdi show channels pseudo default en default In Service 1 from-pstn en default In Service 2 from-pstn en default In Service 3 from-pstn en default In Service 4 from-pstn en default In Service ------------------------------------------------ Refer to, https://www.freepbx.org/ https://www.issabel.org/ https://www.asterisk.org/
Roby Technology Co., Limited
Asterisk PCI Analog Board with 1 FXO+3FXS,with Echo Canceller Hardware,supports issabel,Freepbx,For Asterisk PBX VoIP PABX Phone System TDM400P TDM410P
8 Port PCI-E Asterisk Card with 8 FXO Ports,with Echo Cancellation hardware,Supports Asterisk FreePBX Issabel AsteriskNow Dahdi,tdm800 tdm410p tdm400p
Purchase Notice: 1). The card is with 8 FXO .with Echo Cancellation Hardware. 2). The card is with PCI-E connector. 3). It supports Asterisk,Issabel,AsteriskNow,Freepbx,...Dahdi driver.You can build a telephone solution / IP PBX / call center /SIP server based on the card easily at a very low cost. Description : Using the card, open source Asterisk PBX and stand alone PC, users can create their SOHO telephony solution,IP PBX,call center include all the sophisticated features of traditional PBX, and extend features such as voice mail,IVR,Call meeting,SIP trunk,outbound route,inbound route,call waiting ,call forwarding ... It supports standard dahdi / zaptel drivers , can work with Asterisk / FreePbx / Elastix / Issabel /AsteriskNow Dahdi... Specification: The card is bundled with 8 FXO or FXS ports. The FXO module is in red and the FXS model is in green . FXO port connects to PSTN line and the FXS port connects to the telephone. Issabel, AsteriskNow, Freepbx Settings: [Issabel.localdomain ~]# dahdi_genconf [Issabel.localdomain ~]# dahdi_cfg -vvvv DAHDI Tools Version - 2.2.0 DAHDI Version: 2.2.0 Echo Canceller(s): MG2 Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 03) Channel 04: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 04) Channel 05: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 05) Channel 06: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 06) Channel 07: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 07) Channel 08: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 08) [Issabel.localdomain ~]# asterisk -vvr Issabel*CLI & gt; dahdi show channels pseudo default en default In Service 1 from-pstn en default In Service 2 from-pstn en default In Service 3 from-pstn en default In Service 4 from-pstn en default In Service 5 from-pstn en default In Service 6 from-pstn en default In Service 7 from-pstn en default In Service 8 from-pstn en default In Service ------------------------------------------------ Refer to, https://www.freepbx.org/ https://www.issabel.org/ https://www.asterisk.org/
Roby Technology Co., Limited
8 Port PCI-E Asterisk Card with 8 FXO Ports,with Echo Cancellation hardware,Supports Asterisk FreePBX Issabel AsteriskNow Dahdi,tdm800 tdm410p tdm400p
10 units - 1 Port Wallplate For RJ11 RJ45 Socket Wall Mount Faceplate,RJ45 Network Keystone Telephone Jacks Panel 86x86mm
Name : Type 86 (86 x86 mm) Wallplate Faceplate,Wall Socke Color: White Size: 3.4inch x 3.4inch /86mm x 86 mm Accessory:Screw, Tags of Telephone and PC (network) with different color. Material: ABS plastic Features There is a dust cover to prevent dust,The Anti-dust shutter can prevent dust or water eroding the contact pin and protect the keystone modules or RJ11 / RJ45 jacks. it can be used for both RJ11 Telephone keystone and RJ45 Network Keystone (RJ11/RJ45 universal) and it is with Screws,Tags of Telephone and PC (network). High-quality white plastic materials, embedded in the frame, it is very easy to installand and it looks elegant and pretty. Package includes: 10 x Computer / Telephone Wallplate (without the keystone modules).
Roby Technology Co., Limited
10 units - 1 Port Wallplate For RJ11 RJ45 Socket Wall Mount Faceplate,RJ45 Network Keystone Telephone Jacks Panel 86x86mm
Wall Plate Cover with USB+Speaker+LC Modules Connectors Plug/Jack White Wall Mount Faceplate Holder
. Package Content: 1 unit Wall Plate. Size: 118 * 72 mm ( 4.65 * 2.83 in) Material: Plastic Color: White Durability The wall plate is made of high quality poly-carbonate thermoplastic material, supports long-term use, elasticity to hold up against hard impacts and heavy force. Easy to install with screws and users can install it easily. White Color Fits Your Home or Office To maintain its neat and discreet design, the wall plate is white color, to maintain a consistent color scheme throughout your home or office. Flexibility Designed for indoor use, Without cables running around, Great replacement for standard home or office wallplates organizing the lines or cables behind the wall for a professional-looking installation. With the wall plate, users need not run cables across the floor......
Roby Technology Co., Limited
Wall Plate Cover with USB+Speaker+LC Modules Connectors Plug/Jack White Wall Mount Faceplate Holder
T1 Card E1 Card TE110E ,ISDN PRI SS7 Voice Card supports Asterisk FreePBX Issabel AsteriskNow Compatible with digium card driver dahdi , PCI-E connector,For IP PBX VoIP Phone Appliance VoIP Gateway
Hot Features, with 1 T1 / E1 port, ISDN PRI T1 / E1 PCIE connector Supports Dahdi Supports Asterisk / Issabel / AsteriskNow / Freepbx... Description: The T1/E1 card is a single span, selectable T1 (24-channel) or E1 (32-channel) card that supports all the functionality of asterisk. This card supports both voice and data modes on its single span. For example, the card can support 12 channels dedicated to voice and 12 to data while passing all traffic through to the Asterisk PBX, which reliably routes the channels to their designated locations. This eliminates the need for an external router. By utilizing our TDMoE (TDM over Ethernet) technology, one can easily connect multiple PCs equipped with the card and achieve voice quality on par with single PBX implementations. Scalability for this product is derived from adding multiple cards to each individual PC. Add addition cards as you need them for your expanding applications. The card supports industry standard telephony and data protocols, including both RBS and Primary Rate ISDN (PRI) protocol families for voice and PPP, Cisco HDLC, and Frame Relay data modes. The board drives both line-side and trunk-side interfaces, including call features. The card brings a high-performance, cost-effective, and flexible single span togglable T1/PRI or E1/PRI interface to the line-up of telephony interface devices. The card is a compact and powerful interface supporting voice and data transmission over T1, E1, and Primary Rate ISDN (PRI) connections. A low profile, half-length form factor allows this device to fit within a 2U rackmount case or equivalent chassis, offer excellent density for call center, service provider, and other space-sensitive applications. Of course, the card is fully supported open source Asterisk PBX software. Used in conjunction with Asterisk, the card offers the power to create a seamless network, interconnecting traditional telephony systems with the emerging Voice-over IP technologies. It can be used to deliver a wide range of PBX and IVR services to the network or handset including Voicemail, Call Conferencing, Three-Way Calling, and VoIP Gateways. Target applications: High performance ISDN cards ISDN LAN routers for PRI ISDN least cost routers for PRI ISDN test equipment for PRI ISDN PABX for PRI/PRA VOIP gateways Specification: Data Modes: Cisco HDLC HDLC PPP Multilink PPP Frame Relay Voice Modes: PRI CPE & PRI NET - NI1 - NI2 - EuroISDN - 4ESS (AT & T) - 5ESS (Lucent) - DMS100 E & M - Wink - Feature Group B - Feature Group D FXO & FXS - Ground Start - Loop Start - Loop Start with Disconnect Detect [dahdi.localdomain ~]# dahdi_test Opened pseudo dahdi interface, measuring accuracy... 99.986% 99.971% 99.982% 99.982% 99.983% 99.979% 99.984% 99.979% 99.984% 99.976% 99.982% 99.982% 99.981% 99.982% 99.982% 99.982% 99.981% 99.981% 99.984% 99.981% 99.982% 99.981% 99.982% 99.983% 99.982% 99.982% 99.981% 99.982% 99.983% 99.982% 99.981% 99.982%
Roby Technology Co., Limited
T1 Card E1 Card TE110E ,ISDN PRI SS7 Voice Card supports Asterisk FreePBX Issabel AsteriskNow Compatible with digium card driver dahdi , PCI-E connector,For IP PBX VoIP Phone Appliance VoIP Gateway
TE420 Asterisk Card 4 Port ISDN SS7 PRI Card,T1 Card E1 Card,PCI-E Connector,For IP PBX VoIP Telephony System PABX Phone Solution,Supports Digium asterisk Sangoma FreePBX Issabel VitalPBX Dahdi
Hot Features, PCI-E Connector.with 4 T1/E1 ports.ISDN PRI card.Supports Dahdi driver.Supports Asterisk,Issabel,AsteriskNow,Freepbx...You can build a telephone solution / IP PBX / call center / VoIP System/ Voice phone appliance based on the card. Description: The T1/E1 card is selectable T1 (24-channel) or E1 (32-channel) card that supports all the functionality of asterisk. This card supports both voice and data modes . The card is fully supported open source Asterisk PBX software. Used in conjunction with Asterisk, the card offers the power to create a seamless network, interconnecting traditional telephony systems with the emerging Voice-over IP technologies. It can be used to deliver a wide range of PBX and IVR services to the network or handset including Voicemail, Call Conferencing, Three-Way Calling, and VoIP Gateways. By utilizing our TDMoE (TDM over Ethernet) technology, one can easily connect multiple PCs equipped with the card and achieve voice quality on par with single PBX implementations. Scalability for this product is derived from adding multiple cards to each individual PC. Add addition cards as you need them for your expanding applications. The card supports industry standard telephony and data protocols, including both RBS and Primary Rate ISDN (PRI) protocol families for voice and PPP, Cisco HDLC, and Frame Relay data modes. The board drives both line-side and trunk-side interfaces, including call features. The card brings a high-performance, cost-effective, and flexible T1/PRI or E1/PRI interface to the line-up of telephony interface devices. The card is a compact and powerful interface supporting voice and data transmission over T1, E1, and Primary Rate ISDN (PRI) connections. Specification: Data Modes: Cisco HDLC HDLC PPP Multilink PPP Frame Relay Voice Modes: PRI CPE & PRI NET - NI1 - NI2 - EuroISDN - 4ESS (AT & T) - 5ESS (Lucent) - DMS100 E & M - Wink - Feature Group B - Feature Group D
Roby Technology Co., Limited
TE420 Asterisk Card 4 Port ISDN SS7 PRI Card,T1 Card E1 Card,PCI-E Connector,For IP PBX VoIP Telephony System PABX Phone Solution,Supports Digium asterisk Sangoma FreePBX Issabel VitalPBX Dahdi
Asterisk Card TDM400P with 3 FXO + 1 FXS modules,Supports digium asterisk sangoma FreePBX For Phone System IP PBX TDM400
Purchase Notice: 1). The card is with 3 FXO+1 FXS modules. 2). The card is with PCI connector. 3). It supports Asterisk,Issabel,AsteriskNow,Freepbx,...Dahdi driver.You can build a telephone solution / IP PBX / call center /SIP server based on the card easily at a very low cost. Description : Using the card, open source Asterisk PBX and stand alone PC, users can create their SOHO telephony solution,IP PBX,call center include all the sophisticated features of traditional PBX, and extend features such as voice mail,IVR,Call meeting,SIP trunk,outbound route,inbound route,call waiting ,call forwarding ... It supports standard dahdi / zaptel drivers , can work with Asterisk / FreePbx / Issabel /AsteriskNow Dahdi... Specification: The card is bundled with 4 FXO or FXS modules. The FXO module is in red and the FXS model is in green . FXO port connects to PSTN line and the FXS port connects to the telephone. Issabel, AsteriskNow, Freepbx Settings: [Issabel.localdomain ~]# dahdi_genconf [Issabel.localdomain ~]# dahdi_cfg -vvvv DAHDI Tools Version - 2.2.0 DAHDI Version: 2.2.0 Echo Canceller(s): MG2 Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 03) Channel 04: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 04) [Issabel.localdomain ~]# asterisk -vvr Issabel*CLI & gt; dahdi show channels pseudo default en default In Service 1 from-pstn en default In Service 2 from-pstn en default In Service 3 from-pstn en default In Service 4 from-pstn en default In Service ------------------------------------------------ Refer to, https://www.freepbx.org/ https://www.issabel.org/ https://www.asterisk.org/
Roby Technology Co., Limited
Asterisk Card TDM400P with 3 FXO + 1 FXS modules,Supports digium asterisk sangoma FreePBX For Phone System IP PBX TDM400
S400M Quad FXS module-4 Port FXS module,FXS-400 4 FXS channels for TDM800P AEX800 TDM2400p
S400M Features: 4 Port FXS Module Compatible with TDM800P AEX800 TDM2400P AEX2400
Roby Technology Co., Limited
S400M Quad FXS module-4 Port FXS module,FXS-400 4 FXS channels for TDM800P AEX800 TDM2400p
Wall Faceplate with HDMI + USB + RJ45 Ports,Ethernet Keystone Cat6 Network Module White Wall Mount Plate Panel Type#118
. Package Content: 1 unit Wall Plate. Size: 118 * 72 mm ( 4.65 * 2.83 in) Material: Plastic Color: White Durability The wall plate is made of high quality poly-carbonate thermoplastic material, supports long-term use, elasticity to hold up against hard impacts and heavy force. Easy to install with screws and users can install it easily. White Color Fits Your Home or Office To maintain its neat and discreet design, the wall plate is white color, to maintain a consistent color scheme throughout your home or office. Flexibility Designed for indoor use, Without cables running around, Great replacement for standard home or office wallplates organizing the lines or cables behind the wall for a professional-looking installation. With the wall plate, users need not run cables across the floor......
Roby Technology Co., Limited
Wall Faceplate with HDMI + USB + RJ45 Ports,Ethernet Keystone Cat6 Network Module White Wall Mount Plate Panel Type#118
Asterisk Card TDM410E with 4 FXO Ports,PCI-E,Analog FXO Card,Quad Span Analog Board compatible digium card Asterisk,Issabel,Freepbx,AsteriskNow,tdm410,tdm400,aex410
Purchase Notice: 1). The card is with 4 FXO modules. 2). The card is with PCI Express (PCI-E) connector. 3). It supports Asterisk,Issabel,AsteriskNow,Freepbx,...Dahdi driver.You can build a telephone solution / IP PBX / call center /SIP server based on the card easily at a very low cost. Description : Using the card, open source Asterisk PBX and stand alone PC, users can create their SOHO telephony solution,IP PBX,call center include all the sophisticated features of traditional PBX, and extend features such as voice mail,IVR,Call meeting,SIP trunk,outbound route,inbound route,call waiting ,call forwarding ... It supports standard dahdi / zaptel drivers , can work with Asterisk / FreePbx / Elastix / Issabel /AsteriskNow Dahdi... Specification: The card is bundled with 4 FXO or FXS modules. The FXO module is in red and the FXS model is in green . FXO port connects to PSTN line and the FXS port connects to the telephone. Issabel, AsteriskNow, Freepbx Settings: [Issabel.localdomain ~]# dahdi_genconf [Issabel.localdomain ~]# dahdi_cfg -vvvv DAHDI Tools Version - 2.2.0 DAHDI Version: 2.2.0 Echo Canceller(s): MG2 Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 03) Channel 04: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 04) [Issabel.localdomain ~]# asterisk -vvr Issabel*CLI & gt; dahdi show channels pseudo default en default In Service 1 from-pstn en default In Service 2 from-pstn en default In Service 3 from-pstn en default In Service 4 from-pstn en default In Service ------------------------------------------------ Refer to, https://www.freepbx.org/ https://www.issabel.org/ https://www.asterisk.org/
Roby Technology Co., Limited
Asterisk Card TDM410E with 4 FXO Ports,PCI-E,Analog FXO Card,Quad Span Analog Board compatible digium card Asterisk,Issabel,Freepbx,AsteriskNow,tdm410,tdm400,aex410
1 Unit - PCI-E 1x Riser Cable Extender Extension Cable for 1U 2U Small Case,( 1 Unit )
PCI-E 1x male to female riser card extender. 100% brand new and high quality. This riser cable can be used to mount a card in a wide variety of situations. It is especially suitable for custom enclosures and low-profile rackmount chassis. Connect more devices easily and quickly to your computer. No Driver necessary and jump-less. Perfect for small computer & server case, like 1U 2U & 4U.
Roby Technology Co., Limited
1 Unit - PCI-E 1x Riser Cable Extender Extension Cable for 1U 2U Small Case,( 1 Unit )
1 Unit - PCI Express 1X (PCI-E 1x),(PCIe 1x) Riser Extender Extension Cable 90 degree Right Angle for 1U 2U Small Case PCIe Ribbon
PCI-E 1x male to female riser card extender. 100% brand new and high quality. This riser cable can be used to mount a card in a wide variety of situations. It is especially suitable for custom enclosures and low-profile rackmount chassis. Connect more devices easily and quickly to your computer. No Driver necessary and jump-less. Perfect for small computer & server case, like 1U 2U & 4U.
Roby Technology Co., Limited
1 Unit - PCI Express 1X (PCI-E 1x),(PCIe 1x) Riser Extender Extension Cable 90 degree Right Angle for 1U 2U Small Case PCIe Ribbon
1 Unit - PCI 32bit Riser Extender Extension Cable for 1U 2U Small Case,PCI Extension Ribbon Flex Flexible Cable
PCI male to female riser card extender. 100% brand new and high quality. This riser cable can be used to mount a card in a wide variety of situations. It is especially suitable for custom enclosures and low-profile rackmount chassis. Connect more devices easily and quickly to your computer. No Driver necessary and jump-less. Perfect for small computer & server case, like 1U 2U & 4U.
Roby Technology Co., Limited
1 Unit - PCI 32bit Riser Extender Extension Cable for 1U 2U Small Case,PCI Extension Ribbon Flex Flexible Cable
4 Port ISDN E1 / T1 Card,PCI Interface,Support Astersk digium AsteriskNow sangoma Freepbx Issabel ,dahdi.T1 Card te420p ISDN SS7 PRI ,Call Center VoIP Phone System IP PBX
Hot Features, PCI Connector with 4 T1/E1 ports. ISDN PRI card Supports Dahdi driver Supports Asterisk,Issabel,AsteriskNow,Freepbx... You can build a telephone solution / IP PBX / call center / VoIP System/ Voice phone appliance based on the card Description: The T1/E1 card is a quad span, selectable T1 (24-channel) or E1 (32-channel) card that supports all the functionality of asterisk. This card supports both voice and data modes . The card is fully supported open source Asterisk PBX software. Used in conjunction with Asterisk, the card offers the power to create a seamless network, interconnecting traditional telephony systems with the emerging Voice-over IP technologies. It can be used to deliver a wide range of PBX and IVR services to the network or handset including Voicemail, Call Conferencing, Three-Way Calling, and VoIP Gateways. By utilizing our TDMoE (TDM over Ethernet) technology, one can easily connect multiple PCs equipped with the card and achieve voice quality on par with single PBX implementations. Scalability for this product is derived from adding multiple cards to each individual PC. Add addition cards as you need them for your expanding applications. The card supports industry standard telephony and data protocols, including both RBS and Primary Rate ISDN (PRI) protocol families for voice and PPP, Cisco HDLC, and Frame Relay data modes. The board drives both line-side and trunk-side interfaces, including call features. The card brings a high-performance, cost-effective, and flexible T1/PRI or E1/PRI interface to the line-up of telephony interface devices. The card is a compact and powerful interface supporting voice and data transmission over T1, E1, and Primary Rate ISDN (PRI) connections. Specification: Data Modes: Cisco HDLC HDLC PPP Multilink PPP Frame Relay Voice Modes: PRI CPE & PRI NET - NI1 - NI2 - EuroISDN - 4ESS (AT & T) - 5ESS (Lucent) - DMS100 E & M - Wink - Feature Group B - Feature Group D
Roby Technology Co., Limited
4 Port ISDN E1 / T1 Card,PCI Interface,Support Astersk digium AsteriskNow sangoma Freepbx Issabel ,dahdi.T1 Card te420p ISDN SS7 PRI ,Call Center VoIP Phone System IP PBX
1 Unit - 90 Degree SATA Cable With Locking Latch 18Inch,SATA 3.0 SSD Cable HDD Cable Hard Drive Cable 6.0 Gbps
Q'ty:1 Unit 50cm/20in, SATA revision 3.0 provides up to 6Gbps With locking latch on each end,it doesn't get loose itself while working Compatible with both 3.5" and 2.5" SATA hard drives It is compatible with SATA I and SATA II
Roby Technology Co., Limited
1 Unit - 90 Degree SATA Cable With Locking Latch 18Inch,SATA 3.0 SSD Cable HDD Cable Hard Drive Cable 6.0 Gbps
Wall Faceplate with 3 HDMI Ports,HDMI Keystone Module White Wall Mount Plate Panel Type#118
. Package Content: 1 unit Wall Plate. Size: 118 * 72 mm ( 4.65 * 2.83 in) Material: Plastic Color: White Durability The wall plate is made of high quality poly-carbonate thermoplastic material, supports long-term use, elasticity to hold up against hard impacts and heavy force. Easy to install with screws and users can install it easily. White Color Fits Your Home or Office To maintain its neat and discreet design, the wall plate is white color, to maintain a consistent color scheme throughout your home or office. Flexibility Designed for indoor use, Without cables running around, Great replacement for standard home or office wallplates organizing the lines or cables behind the wall for a professional-looking installation. With the wall plate, users need not run cables across the floor......
Roby Technology Co., Limited
Wall Faceplate with 3 HDMI Ports,HDMI Keystone Module White Wall Mount Plate Panel Type#118
FXO Module X100M,1 Port FXO Single Channel Trunk (FXO) Module For TDM400p TDM410P AEX410 TDM410E
X100M Features: 1 Port FXO Resources Module Compatible with TDM400P X100P TDM400P TDM410P AEX410 Cards, etc.
Roby Technology Co., Limited
FXO Module X100M,1 Port FXO Single Channel Trunk (FXO) Module For TDM400p TDM410P AEX410 TDM410E
4 Units - PCI Express (PCIe,PCI-e) 16x Riser Adapter Riser Card,Extension Adapter to Protect PCIe Slot
Interface: PCI Express (PCI-E) 16x Users may use this item to protect your slot if users plug PCIE slot frequently. For example, if you are testing many PCIE cards, you need this item to protect your slot. Brand new and high quality No need to set jumpers or drive Plug and play. Specifications: Material: Plastic, Electronic Parts
Roby Technology Co., Limited
4 Units - PCI Express (PCIe,PCI-e) 16x Riser Adapter Riser Card,Extension Adapter to Protect PCIe Slot
TE220 2 port T1 Board E1 Board,Voice Card Supports digium asterisk,sangoma freepbx and Issabel,PCI Express (PCIE)
Hot Features, PCI-E Connector with 2 T1/E1 ports. ISDN PRI card Supports Dahdi driver Supports Asterisk,Issabel,AsteriskNow,Freepbx... You can build a telephone solution / IP PBX / call center / VoIP System/ Voice phone appliance based on the card Description: The T1/E1 card is a dual span, selectable T1 (24-channel) or E1 (32-channel) card that supports all the functionality of asterisk. This card supports both voice and data modes . The card is fully supported open source Asterisk PBX software. Used in conjunction with Asterisk, the card offers the power to create a seamless network, interconnecting traditional telephony systems with the emerging Voice-over IP technologies. It can be used to deliver a wide range of PBX and IVR services to the network or handset including Voicemail, Call Conferencing, Three-Way Calling, and VoIP Gateways. By utilizing our TDMoE (TDM over Ethernet) technology, one can easily connect multiple PCs equipped with the card and achieve voice quality on par with single PBX implementations. Scalability for this product is derived from adding multiple cards to each individual PC. Add addition cards as you need them for your expanding applications. The card supports industry standard telephony and data protocols, including both RBS and Primary Rate ISDN (PRI) protocol families for voice and PPP, Cisco HDLC, and Frame Relay data modes. The board drives both line-side and trunk-side interfaces, including call features. The card brings a high-performance, cost-effective, and flexible T1/PRI or E1/PRI interface to the line-up of telephony interface devices. The card is a compact and powerful interface supporting voice and data transmission over T1, E1, and Primary Rate ISDN (PRI) connections. Specification: Data Modes: Cisco HDLC HDLC PPP Multilink PPP Frame Relay Voice Modes: PRI CPE & PRI NET - NI1 - NI2 - EuroISDN - 4ESS (AT & T) - 5ESS (Lucent) - DMS100 E & M - Wink - Feature Group B - Feature Group D
Roby Technology Co., Limited
TE220 2 port T1 Board E1 Board,Voice Card Supports digium asterisk,sangoma freepbx and Issabel,PCI Express (PCIE)
Wall Plate with 2 LC + SC Modules,Fiber Optic Keystone Connectors Jack / Plug Wall Mount Faceplate Cover
. Package Content: 1 unit Wall Plate. Size: 118 * 72 mm ( 4.65 * 2.83 in) Material: Plastic Color: White Durability The wall plate is made of high quality poly-carbonate thermoplastic material, supports long-term use, elasticity to hold up against hard impacts and heavy force. Easy to install with screws and users can install it easily. White Color Fits Your Home or Office To maintain its neat and discreet design, the wall plate is white color, to maintain a consistent color scheme throughout your home or office. Flexibility Designed for indoor use, Without cables running around, Great replacement for standard home or office wallplates organizing the lines or cables behind the wall for a professional-looking installation. With the wall plate, users need not run cables across the floor......
Roby Technology Co., Limited
Wall Plate with 2 LC + SC Modules,Fiber Optic Keystone Connectors Jack / Plug  Wall Mount Faceplate Cover
Asterisk Card AEX410 with VPMADT032 Echo Cancellation Module,with 3 FXO+1 FXS modules,Supports Asterisk,Issabel,AsteriskNow,Freepbx,VoIP Telephone System IP PBX TDM400 TDM410 Asterisk PBX
Purchase Notice: The card is with 3 FXO+1FXS ports . - FXO port connects to PSTN line and the FXS port connects to the telephone. with Echo Cancellation Module, PCI-E Connector. Supports Asterisk FreePBX AsteriskNow Issabel. Description : AEX410 Asterisk card supports up to four FXO/FXS ports, plug and play. Using AEX410 analog card, open source Asterisk PBX and stand alone PC, users can create their SOHO telephony solution include all the sophisticated features of traditional PBX, and extend features such as voicemail in IP PBX. It supports standard dahdi / zaptel drivers ,Supports Asterisk,Issabel,FreePBX,AsteriskNow ... Specification: The card is bundled with 4 FXO or FXS modules. The FXO module is in red and the FXS model is in green . FXO port connects to PSTN line and the FXS port connects to the telephone. You can get any combination of FXO & FXS modules with the same price,no any additional cost. Please specify what configuration you need when purchase. Issabel,FreePBX,AsteriskNow ... [Issabel.localdomain ~]# dahdi_genconf [Issabel.localdomain ~]# dahdi_cfg -vvvv DAHDI Tools Version - 2.2.0 DAHDI Version: 2.2.0 Echo Canceller(s): MG2 Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 03) Channel 04: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 04) [Issabel.localdomain ~]# asterisk -vr Issabel*CLI> dahdi show channels Chan Extension Context Language MOH Interpret Blocked State pseudo default en default In Service 1 from-pstn en default In Service 2 from-pstn en default In Service 3 from-pstn en default In Service 4 from-pstn en default In Service Issabel*CLI> dahdi show status Description Alarms IRQ bpviol CRC4 Fra Codi Options LBO Wildcard AEX410 Board 1 OK 1 0 0 CAS Unk YEL 0 db (CSU)/0-133 feet (DSX-1)
Roby Technology Co., Limited
Asterisk Card AEX410 with VPMADT032 Echo Cancellation Module,with 3 FXO+1 FXS modules,Supports Asterisk,Issabel,AsteriskNow,Freepbx,VoIP Telephone System IP PBX TDM400 TDM410 Asterisk PBX
Wall Plate Cover with LC + RJ11 Modules Fiber Optic Connectors Plug/Jack White Wall Mount Faceplate Holder for Cabling System
. Package Content: 1 unit Wall Plate. Size: 118 * 72 mm ( 4.65 * 2.83 in) Material: Plastic Color: White Durability The wall plate is made of high quality poly-carbonate thermoplastic material, supports long-term use, elasticity to hold up against hard impacts and heavy force. Easy to install with screws and users can install it easily. White Color Fits Your Home or Office To maintain its neat and discreet design, the wall plate is white color, to maintain a consistent color scheme throughout your home or office. Flexibility Designed for indoor use, Without cables running around, Great replacement for standard home or office wallplates organizing the lines or cables behind the wall for a professional-looking installation. With the wall plate, users need not run cables across the floor......
Roby Technology Co., Limited
Wall Plate Cover with LC + RJ11 Modules Fiber Optic Connectors Plug/Jack White Wall Mount Faceplate Holder for Cabling System
Asterisk Card - ISDN PRI Card TE110P with 1 T1/E1 Port,T1 Card,ISDN Digital Board,Supports sangoma Freepbx Asterisk Issabel AsteriskNow Elastix 4 ,dahdi.vitalpbx,Telephone System
Hot Features, with 1 E1 / T1 port, ISDN PRI T1 / E1 PCI connector Supports Dahdi Supports Asterisk / Issabel / AsteriskNow / Freepbx... Description: The te110p T1/E1 card is a single span, selectable T1 (24-channel) or E1 (32-channel) card that supports all the functionality of asterisk. This card supports both voice and data modes on its single span. For example, the card can support 12 channels dedicated to voice and 12 to data while passing all traffic through to the Asterisk PBX, which reliably routes the channels to their designated locations. This eliminates the need for an external router. By utilizing our TDMoE (TDM over Ethernet) technology, one can easily connect multiple PCs equipped with the card and achieve voice quality on par with single PBX implementations. Scalability for this product is derived from adding multiple cards to each individual PC. Add addition cards as you need them for your expanding applications. The card supports industry standard telephony and data protocols, including both RBS and Primary Rate ISDN (PRI) protocol families for voice and PPP, Cisco HDLC, and Frame Relay data modes. The board drives both line-side and trunk-side interfaces, including call features. The card brings a high-performance, cost-effective, and flexible single span togglable T1/PRI or E1/PRI interface to the line-up of telephony interface devices. The card is a compact and powerful interface supporting voice and data transmission over T1, E1, and Primary Rate ISDN (PRI) connections. A low profile, half-length PCI form factor allows this device to fit within a 2U rackmount case or equivalent chassis, offer excellent density for call center, service provider, and other space-sensitive applications. Of course, the card is fully supported open source Asterisk PBX software. Used in conjunction with Asterisk, the card offers the power to create a seamless network, interconnecting traditional telephony systems with the emerging Voice-over IP technologies. It can be used to deliver a wide range of PBX and IVR services to the network or handset including Voicemail, Call Conferencing, Three-Way Calling, and VoIP Gateways. Target applications: High performance ISDN PCI cards ISDN LAN routers for PRI ISDN least cost routers for PRI ISDN test equipment for PRI ISDN PABX for PRI/PRA VOIP gateways Specification: Data Modes: Cisco HDLC HDLC PPP Multilink PPP Frame Relay Voice Modes: PRI CPE & PRI NET - NI1 - NI2 - EuroISDN - 4ESS (AT & T) - 5ESS (Lucent) - DMS100 E & M - Wink - Feature Group B - Feature Group D FXO & FXS - Ground Start - Loop Start - Loop Start with Disconnect Detect [dahdi.localdomain ~]# dahdi_test Opened pseudo dahdi interface, measuring accuracy... 99.986% 99.971% 99.982% 99.982% 99.983% 99.979% 99.984% 99.979% 99.984% 99.976% 99.982% 99.982% 99.981% 99.982% 99.982% 99.982% 99.981% 99.981% 99.984% 99.981% 99.982% 99.981% 99.982% 99.983% 99.982% 99.982% 99.981% 99.982% 99.983% 99.982% 99.981% 99.982%
Roby Technology Co., Limited
Asterisk Card - ISDN PRI Card TE110P with 1 T1/E1  Port,T1 Card,ISDN Digital Board,Supports sangoma Freepbx Asterisk Issabel AsteriskNow Elastix 4 ,dahdi.vitalpbx,Telephone System
Wall Plate Cover with 3RCA +3.5 Earphone Modules Connectors Plug/Jack White Wall Mount Faceplate Holder for Cabling System
. Package Content: 1 unit Wall Plate. Size: 118 * 72 mm ( 4.65 * 2.83 in) Material: Plastic Color: White Durability The wall plate is made of high quality poly-carbonate thermoplastic material, supports long-term use, elasticity to hold up against hard impacts and heavy force. Easy to install with screws and users can install it easily. White Color Fits Your Home or Office To maintain its neat and discreet design, the wall plate is white color, to maintain a consistent color scheme throughout your home or office. Flexibility Designed for indoor use, Without cables running around, Great replacement for standard home or office wallplates organizing the lines or cables behind the wall for a professional-looking installation. With the wall plate, users need not run cables across the floor......
Roby Technology Co., Limited
Wall Plate Cover with 3RCA +3.5 Earphone Modules Connectors Plug/Jack White Wall Mount Faceplate Holder for Cabling System
Asterisk Card PCI TDM800P with 8 FXO Ports,FXO card analog FXO board tdm800 tdm400p tdm410p compatible digium wildcard For IP Telephone Appliance VoIP PBX System
Purchase Notice: 1). The card is with 8 FXO ports. 2). The card is with PCI connector. 3). It supports Asterisk,Issabel,AsteriskNow,Freepbx,...Dahdi driver.You can build a telephone solution / IP PBX / call center /SIP server based on the card easily at a very low cost. Description : Using the card, open source Asterisk and stand alone PC, users can create their SOHO telephony solution,IP PBX,call center include all the sophisticated features of traditional PBX, and extend features such as voice mail,IVR,Call meeting,SIP trunk,outbound route,inbound route,call waiting ,call forwarding ... It supports standard dahdi / zaptel drivers , can work with Asterisk / FreePbx / Elastix / Issabel /AsteriskNow Dahdi... Specification: The card is bundled with 8 FXO or FXS ports. The FXO module is in red and the FXS model is in green . FXO port connects to PSTN line and the FXS port connects to the telephone. Issabel, AsteriskNow, Freepbx Settings: [Issabel.localdomain ~]# dahdi_genconf [Issabel.localdomain ~]# dahdi_cfg -vvvv DAHDI Tools Version - 2.2.0 DAHDI Version: 2.2.0 Echo Canceller(s): MG2 Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 03) Channel 04: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 04) Channel 05: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 05) Channel 06: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 06) Channel 07: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 07) Channel 08: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 08) [Issabel.localdomain ~]# asterisk -vvr Issabel*CLI & gt; dahdi show channels pseudo default en default In Service 1 from-pstn en default In Service 2 from-pstn en default In Service 3 from-pstn en default In Service 4 from-pstn en default In Service 5 from-pstn en default In Service 6 from-pstn en default In Service 7 from-pstn en default In Service 8 from-pstn en default In Service ------------------------------------------------ Refer to, https://www.freepbx.org/ https://www.issabel.org/ https://www.asterisk.org/
Roby Technology Co., Limited
Asterisk Card PCI TDM800P with 8 FXO Ports,FXO card analog FXO board tdm800 tdm400p tdm410p compatible digium wildcard For IP Telephone Appliance VoIP PBX System
3 PCS - RJ11 Splitter 6P4C 1to3 Female Telephone Splitter,Three Way Telephone Splitters, RJ11 Phone Socket Jack Converter
Include: 3 PCS RJ11 Splitters,1 to 3 F RJ-11 6P4C Phone Jack Splitters. RJ11 1 to 3 Female splitter is used for joining 3 telephone with RJ11 cable to one single phone line. Allow for the joining of 3 short cables in order to extend the length of your need without buying an extra one. -------------- 3 Units in the box Telephone Splitter Adapter RJ11 Phone Jack converters 1to3 RJ11 1 to 3 Female Connectors Type: 6p4c Three Way Telephone Splitters
Roby Technology Co., Limited
3 PCS - RJ11 Splitter 6P4C 1to3 Female Telephone Splitter,Three Way Telephone Splitters, RJ11 Phone Socket Jack Converter
1 Unit - PCI Express 8x (PCI-E 8x) Adapter Riser Card 90 Degree For 1U 2U Server Chassis
Brand new and high quality PCI-E 8x Riser Card Mainly applied to the lateral transfer 1U server chassis or PCI riser card 90 degree adapter card No need to set jumpers or drive Specifications: Material: Plastic, Electronic Parts
Roby Technology Co., Limited
1 Unit - PCI Express 8x (PCI-E 8x) Adapter Riser Card 90 Degree For 1U 2U Server Chassis
Lot of 10 pcs - PCI Express(PCI-E) 8x Riser Cable Extender Extension Cable for 1U 2U Small Case,( 10 pcs )
PCI-E 8x male to female riser card extender. 100% brand new and high quality. This riser cable can be used to mount a card in a wide variety of situations. It is especially suitable for custom enclosures and low-profile rackmount chassis. Connect more devices easily and quickly to your computer. No Driver necessary and jump-less. Perfect for small computer & server case, like 1U 2U & 4U.
Roby Technology Co., Limited
Lot of 10 pcs - PCI Express(PCI-E) 8x Riser Cable Extender Extension Cable for 1U 2U Small Case,( 10 pcs )
Wholesale 30 pcs - PCI 32bit Riser Extender Extension Cable for 1U 2U Small Case,PCI Extension Ribbon Flex Flexible Cable
PCI male to female riser card extender. 100% brand new and high quality. This riser cable can be used to mount a card in a wide variety of situations. It is especially suitable for custom enclosures and low-profile rackmount chassis. Connect more devices easily and quickly to your computer. No Driver necessary and jump-less. Perfect for small computer & server case, like 1U 2U & 4U.
Roby Technology Co., Limited
Wholesale 30 pcs - PCI 32bit Riser Extender Extension Cable for 1U 2U Small Case,PCI Extension Ribbon Flex Flexible Cable
8 Port Asterisk Card AEX800 with 8 FXO Ports,PCI-E,Supports Asterisk FreePBX Issabel AsteriskNow,tdm800 for SIP Phone Solution VoIP Gateway
The card is with 2 quad FXO modules,total 8 FXO ports. with PCI-E (PCIe) Connector. Supports Freepbx,Asterisk,Issabel,asterisknow,dahdi... --The FXO module is in red and the FXS module is in green. --FXO port connects to PSTN line and the FXS port connects to the telephone. The Analog card supports Asterisk,Issabel,FreePBX... Using the analog card, open source VoIP PBX and stand alone PC, users can create their SOHO telephony solution include all the sophisticated features of traditional PBX, and extend features such as voicemail in IP PBX. Issabel/FreePBX Settings: [ .localdomain]#dahdi_genconf [ .localdomain]#dahdi_cfg -vvvv DAHDI Tools Version - 2.2.0 DAHDI Version: 2.2.0 Echo Canceller(s): MG2 Configuration ==================== Channel map: Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) Channel 02: FXS Kewlstart (Default) (Echo Canceler: mg2) Channel 03: FXS Kewlstart (Default) (Echo Canceler: mg2) Channel 04: FXS Kewlstart (Default) (Echo Canceler: mg2) Channel 05: FXS Kewlstart (Default) (Echo Canceler: mg2) Channel 06: FXS Kewlstart (Default) (Echo Canceler: mg2) Channel 07: FXS Kewlstart (Default) (Echo Canceler: mg2) Channel 08: FXS Kewlstart (Default) (Echo Canceler: mg2) ======================
Roby Technology Co., Limited
8 Port Asterisk Card AEX800 with 8 FXO Ports,PCI-E,Supports Asterisk FreePBX Issabel AsteriskNow,tdm800 for SIP  Phone Solution VoIP Gateway
8 Port FXS Card TDM800P with 8 FXS,Analog Board,Asterisk Board TDM800 tdm410p tdm400p
Purchase Notice: 1). The card is with 8 FXS ports. 2). The card is with PCI connector. 3). It supports Asterisk,Issabel,AsteriskNow,Freepbx,...Dahdi driver.You can build a telephone solution / IP PBX / call center /SIP server based on the card easily at a very low cost. Description : Using the card, open source Asterisk and stand alone PC, users can create their SOHO telephony solution,IP PBX,call center include all the sophisticated features of traditional PBX, and extend features such as voice mail,IVR,Call meeting,SIP trunk,outbound route,inbound route,call waiting ,call forwarding ... It supports standard dahdi / zaptel drivers , can work with Asterisk / FreePbx / Elastix / Issabel /AsteriskNow Dahdi... Specification: The card is bundled with 8 FXO or FXS ports. The FXO module is in red and the FXS model is in green . FXO port connects to PSTN line and the FXS port connects to the telephone. Issabel, AsteriskNow, Freepbx Settings: [Issabel.localdomain ~]# dahdi_genconf [Issabel.localdomain ~]# dahdi_cfg -vvvv DAHDI Tools Version - 2.2.0 DAHDI Version: 2.2.0 Echo Canceller(s): MG2 Configuration ====================== Channel map: Channel 01: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01) Channel 02: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 02) Channel 03: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 03) Channel 04: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 04) Channel 05: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 05) Channel 06: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 06) Channel 07: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 07) Channel 08: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 08) [Issabel.localdomain ~]# asterisk -vvr Issabel*CLI & gt; dahdi show channels pseudo default en default In Service 1 from-pstn en default In Service 2 from-pstn en default In Service 3 from-pstn en default In Service 4 from-pstn en default In Service 5 from-pstn en default In Service 6 from-pstn en default In Service 7 from-pstn en default In Service 8 from-pstn en default In Service ------------------------------------------------ Refer to, https://www.freepbx.org/ https://www.issabel.org/ https://www.asterisk.org/
Roby Technology Co., Limited
8 Port FXS Card TDM800P with 8 FXS,Analog Board,Asterisk Board TDM800 tdm410p tdm400p
Wall Faceplate with VGA + RJ11 + LC Ports,Fiber Optic Telephone Keystone Ethernet Keystone Module White Wall Mount Plate Panel Type#118
. Package Content: 1 unit Wall Plate. Size: 118 * 72 mm ( 4.65 * 2.83 in) Material: Plastic Color: White Durability The wall plate is made of high quality poly-carbonate thermoplastic material, supports long-term use, elasticity to hold up against hard impacts and heavy force. Easy to install with screws and users can install it easily. White Color Fits Your Home or Office To maintain its neat and discreet design, the wall plate is white color, to maintain a consistent color scheme throughout your home or office. Flexibility Designed for indoor use, Without cables running around, Great replacement for standard home or office wallplates organizing the lines or cables behind the wall for a professional-looking installation. With the wall plate, users need not run cables across the floor......
Roby Technology Co., Limited
Wall Faceplate with VGA + RJ11 + LC Ports,Fiber Optic Telephone Keystone Ethernet Keystone Module White Wall Mount Plate Panel Type#118
Wall Plate Cover with 3 x 3.5 Earphone Modules Connectors Plug/Jack White Wall Mount Faceplate Holder for Cabling System
. Package Content: 1 unit Wall Plate. Size: 118 * 72 mm ( 4.65 * 2.83 in) Material: Plastic Color: White Durability The wall plate is made of high quality poly-carbonate thermoplastic material, supports long-term use, elasticity to hold up against hard impacts and heavy force. Easy to install with screws and users can install it easily. White Color Fits Your Home or Office To maintain its neat and discreet design, the wall plate is white color, to maintain a consistent color scheme throughout your home or office. Flexibility Designed for indoor use, Without cables running around, Great replacement for standard home or office wallplates organizing the lines or cables behind the wall for a professional-looking installation. With the wall plate, users need not run cables across the floor......
Roby Technology Co., Limited
Wall Plate Cover with 3 x 3.5 Earphone Modules Connectors Plug/Jack White Wall Mount Faceplate Holder for Cabling System
2 RJ45 Connectors Cat5e Cat6 Network Ethernet Keystone Information Wall Plate Cover with Modules Wall Mount Faceplate Socket Plug Jack
Wall Plate: Package Content: 1 unit Wall Plate. Size: 86 * 86 mm ( 3.39 * 3.39 in) Material: Plastic Color: White Durability The wall plate is made of high quality poly-carbonate thermoplastic material, supports long-term use, elasticity to hold up against hard impacts and heavy force. Easy to install with screws and users can install it easily. White Color Fits Your Home or Office To maintain its neat and discreet design, the wall plate is white color, to maintain a consistent color scheme throughout your home or office. Flexibility Designed for indoor use, Without cables running around, Great replacement for standard home or office wallplates organizing the lines or cables behind the wall for a professional-looking installation. With the wall plate, users need not run cables across the floor.
Roby Technology Co., Limited
2 RJ45 Connectors Cat5e Cat6 Network Ethernet Keystone Information Wall Plate Cover with Modules Wall Mount Faceplate Socket Plug Jack
Wholesale 1000 units- RJ11 6P2C Phone Cord Connectors RJ11 Plug Telephone Modular,RJ11 Connector,Telephone Line Jack
RJ11 plug connector is used for the telephone cable. Type: 6p2c 6P2C means that the contacts on the plugs have 6 positions, of which 2 gold-plated contacts are placed. The RJ11 plugs are suitable for telephone lines, phone cord in home or office. Package Included: 1000 x RJ11 Plugs
Roby Technology Co., Limited
Wholesale 1000 units- RJ11 6P2C Phone Cord Connectors RJ11 Plug Telephone Modular,RJ11 Connector,Telephone Line Jack
1 Unit - PCI Express 1X (PCI-E 1x) Riser Extender FPC Extension Cable 90 degree for 1U 2U Small Case PCIe Ribbon
PCI-E 1x male to female riser card extender. 100% brand new and high quality. This riser cable can be used to mount a card in a wide variety of situations. It is especially suitable for custom enclosures and low-profile rackmount chassis. Connect more devices easily and quickly to your computer. No Driver necessary and jump-less. Perfect for small computer & server case, like 1U 2U & 4U.
Roby Technology Co., Limited
1 Unit - PCI Express 1X (PCI-E 1x) Riser Extender FPC Extension Cable 90 degree for 1U 2U Small Case PCIe Ribbon
2 FXO+2 FXO Ports VoIP PBX Based on Elastix 2.0, Elastix Server,VoIP Telephony System
Default Settings: WAN : DHCP Client LAN : 192.168.0.200 Username / Password: admin / 123456 root / 123456 Description: The VoIP PBX based on Elastix 2.0 allows users to monitor communications in your office or home from anywhere. Easy to install, powerful administration as only Elastix 2.0 offers and its very low power consumption, make it a very safe and cost effective solution. The software is Elastix 2.0,please understand how to config Elastix before you buy.We don't provide support of the software. Specifications: -CPU: Intel Atom N2800 Dual Core 1.86GHz -DRAM: 2GB DDR3 SDRAM. -Storage:32G mSATA SSD. -Power: 110-240V input -Connectivity:2 Ethernet controllers (RLT8111C) -Mini-itx ATOM motherboard Features: -Up to 1000 registers -Video Calls -Recording -DID(Direct Inward Dialing Number) -Support SKYPE for SIP -Call Monitoring -Configuration By web -Built-in SIP/IAX2 server -Auto Attendants -Voicemail -Dial-By-Name Directory -Music on Hold -Ring Groups -Call Queue -Call Waiting -Caller Display -Conference Call -Call Hold/Transfer -Call Park -Call Pickup -Automatic Fax Detection -Remote Management
Roby Technology Co., Limited
2 FXO+2 FXO Ports VoIP PBX Based on Elastix 2.0, Elastix Server,VoIP Telephony System
Asterisk FXS FXO Board TDM410P with Echo Canceller Hardware,with 2 FXO+2 FXS ports For Issabel,AsteriskNow,Freepbx,Elastix 4,,Dahdi,ax400p,tdm410,tdm400p,For VoIP PABX Asterisk PBX
Purchase Notice: 1). The card is with 2 FXO+2FXS modules. 2). The card is with PCI connector. 3). It supports Asterisk,Issabel,AsteriskNow,Freepbx,...Dahdi driver.You can build a telephone solution / IP PBX / call center /SIP server based on the card easily at a very low cost. Description : Using the card, open source Asterisk PBX and stand alone PC, users can create their SOHO telephony solution,IP PBX,call center include all the sophisticated features of traditional PBX, and extend features such as voice mail,IVR,Call meeting,SIP trunk,outbound route,inbound route,call waiting ,call forwarding ... It supports standard dahdi / zaptel drivers , can work with Asterisk / FreePbx / Elastix / Issabel /AsteriskNow Dahdi... Specification: The card is bundled with 4 FXO or FXS modules. The FXO module is in red and the FXS model is in green . FXO port connects to PSTN line and the FXS port connects to the telephone. Issabel, AsteriskNow, Freepbx Settings: [Issabel.localdomain ~]# dahdi_genconf [Issabel.localdomain ~]# dahdi_cfg -vvvv DAHDI Tools Version - 2.2.0 DAHDI Version: 2.2.0 Echo Canceller(s): MG2 Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 02) Channel 03: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 03) Channel 04: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 04) [Issabel.localdomain ~]# asterisk -vvr Issabel*CLI & gt; dahdi show channels pseudo default en default In Service 1 from-pstn en default In Service 2 from-pstn en default In Service 3 from-pstn en default In Service 4 from-pstn en default In Service ------------------------------------------------ Refer to, https://www.freepbx.org/ https://www.issabel.org/ https://www.asterisk.org/
Roby Technology Co., Limited
Asterisk FXS FXO Board TDM410P with Echo Canceller Hardware,with 2 FXO+2 FXS ports For Issabel,AsteriskNow,Freepbx,Elastix 4,,Dahdi,ax400p,tdm410,tdm400p,For VoIP PABX Asterisk PBX
Back to Top