SANOXY Cables and Adapters; 6ft 14 AWG 15A 250V Power Cord (IEC320 C20 to IEC320 C13), Green
C20 to C13 power cords are most commonly used in data center and IT installations. Featuring IEC320 C13 to IEC320 C20 connectors, the power cords are built with heavy duty 14 gauge conductors. Cables are fully rated for 250 Volt/15 Amp applications. Our C20 to C13 power cords are UL/CSA approved and RoHS certified.
SANOXY Cables and Adapters; 1m LC/SC Duplex 9/125 Single Mode Fiber Optic Cable
Cost-effective solution that provides high bandwidth and transmission rates over longer distances. With LC to SC termination, this high-quality fiber optic patch cable is specifically designed for gigabit ethernet applications.
SANOXY Cables and Adapters; 1m MTRJ/LC Duplex 62.5/125 Multimode OM1 Fiber Optic Cable
With LC to MTRJ termination, this high-quality fiber optic patch cable is specifically designed for fast ethernet, fiber channel, ATM and gigabit ethernet applications. Both connectors with their RJ-style latch clip design are easy to engage and disengage, and give each connection greater durability in resisting pulls, strains, snags, and impacts during cabling installs and maintenance.
SANOXY Cables and Adapters; 8ft 14 AWG 15A 250V Power Cord (IEC320 C14 to IEC320 C19), White
These IEC power cords are ideal for powering PDUs, servers, UPSs, and many more devices and appliances which use the IEC-60320-C20 inlet.
SANOXY Cables and Adapters; 10ft 14 AWG 15A 250V Power Cord (IEC320 C14 to IEC320 C15), Green
This power cord features a C15 connector rated for high-temperature equipment, as well as 14 AWG wire suitable for high power connections. C14 to C15 power cord allows connection from high voltage network hardware utilizing C15 type connectors to PDU's and UPS systems with C14 type inputs.
SANOXY Cables and Adapters; 15 Meters ST to ST Duplex 62.5/125 Multimode OM1 Fiber Optic Cable
With ST to ST termination, this high-quality fiber optic patch cable is specifically designed for ethernet, multimedia, or communication applications. The ST connector features a bayonet locking system.
SANOXY Cables and Adapters; 15m SC/SC Duplex 50/125 Multimode OM2 Fiber Optic Cable
Cost-effective solution that provides higher bandwidth and transmission rates and supports longer distances with lower loss than 62.5 /125 fiber. Specifically designed for gigabit ethernet, fiber channel, Infiniband®, ATM, and internet protocol applications.
SANOXY Cables and Adapters; 4 PACK of 3ft 18 AWG Universal Power Cord (IEC320 C13 to NEMA 5-15P), Red
This standard power cord is designed to work with most PCs, monitors, scanners, printers and other devices that use the 3-pin shroud power connector. Cable features an AC style plug (NEMA 5-15P) on one end and a computer style receptacle (IEC-320-C13) on the other end. The female connector plugs directly into the device while the male connector plugs into a standard outlet.
SANOXY Cables and Adapters; 10m 10Gb LC/LC Duplex 50/125 Multimode OM3 Fiber Optic Cable
With the development of multimedia, there is requirement for more and more broad bandwidth for audio and video applications. Our 10 Gig fiber optic patch cords are designed to meet this requirement. This laser-optimized multimode fiber (LOMMF) "Aqua" cable is typically used in 10 Gigabit Ethernet and it provides backward compatibility with existing 50/125 equipment. Typically this fiber optic patch cable is with 50/125 multimode fiber and aqua jacket. They can be terminated with various kinds of connectors like LC, SC, FC, ST, MTRJ, etc. LOMMF is ideally suited for LAN's, SAN's, and high-speed parallel interconnects for head-ends, central offices, and data centers.
SANOXY Cables and Adapters; 15m LC/LC Duplex 50/125 Multimode OM2 Fiber Optic Cable
Cost-effective solution that provides higher bandwidth and transmission rates and supports longer distances with lower loss than 62.5 /125 fiber. Specifically designed for gigabit ethernet, fiber channel, Infiniband®, ATM, and internet protocol applications.
SANOXY Cables and Adapters; 5m SC/SC Duplex 9/125 Single Mode Fiber Optic Cable
Cost-effective solution that provides high bandwidth and transmission rates over longer distances. With SC to SC termination, this high-quality fiber optic patch cable is specifically designed for gigabit ethernet applications.
SANOXY Cables and Adapters; 10ft 14 AWG Universal Power Cord (IEC320 C13 to NEMA 5-15P)
This standard power cord is designed to work with most PCs, monitors, scanners, printers and other devices that use the 3-pin shroud power connector. Cable features an AC style plug (NEMA 5-15P) on one end and a computer style receptacle (IEC-320-C13) on the other end. The female connector plugs directly into the device while the male connector plugs into a standard outlet.
SANOXY Cables and Adapters; 10ft 14 AWG 15A 125V Power Cord (NEMA 5-15P to IEC320 C15)
The IEC C15 power cord receptacle is commonly used in data center and kitchen appliances. The IEC C15 is perfect for applications such as connecting servers to power distribution Units (PDUs) and small appliances like electric kettles and griddles.
SANOXY Cables and Adapters; 1 Meter LC to ST Duplex 62.5/125 Multimode OM1 Fiber Optic Cable
With LC to ST termination, this high-quality fiber optic patch cable is specifically designed for fast ethernet, ATM and gigabit ethernet applications. The LC connector with its RJ-style latch clip design is easy to engage and disengage, and gives each connection greater durability in resisting pulls, strains, snags, and impacts during cabling installs and maintenance. The ST connector features a bayonet locking system.
SANOXY Cables and Adapters; 3ft 10 AWG 30A 125V Extension Power Cord NEMA L5-30P to NEMA L5-30R
This power cord features a male locking NEMA L5-30P plug on one end and a female locking NEMA L5-30R connector on the other end. It is typically used as an extension cable. The locking connectors prevent accidental disconnection, making it popular in commercial settings with high traffic. The 10 AWG thick wire is designed for applications that require high power levels.
SANOXY Cables and Adapters; 8ft 14 AWG 15A 250V Power Cord (IEC320 C14 to IEC320 C15), Blue
This power cord features a C15 connector rated for high-temperature equipment, as well as 14 AWG wire suitable for high power connections. C14 to C15 power cord allows connection from high voltage network hardware utilizing C15 type connectors to PDU's and UPS systems with C14 type inputs.
SANOXY Cables and Adapters; 6ft 14 AWG 15A 250V Power Cord (IEC320 C20 to IEC320 C13), Blue
C20 to C13 power cords are most commonly used in data center and IT installations. Featuring IEC320 C13 to IEC320 C20 connectors, the power cords are built with heavy duty 14 gauge conductors. Cables are fully rated for 250 Volt/15 Amp applications. Our C20 to C13 power cords are UL/CSA approved and RoHS certified.
SANOXY 2.4G Wireless Slim Flat Mouse for Computer/Laptop HIGH DPI (White&Black)
FROM THE MANUFACTURERSANOXY Ergonomic Grip 2.4G Wireless Mice with Exchangeable 500/1000 DPI High-resolution. KEY FEATURES* Accessory: Nano USB receiver. * Switch lifespan: 5, 000, 000 times *Effective range: up to 10 meters effective using range *SANOXY 2.4G wireless mouse with 1, 000DPI, working distance is 10m range. Comfortable Ergonomic Design Wireless Mouse for dailiy use, playing computer games or browsing on internetSANOXY brand has been awarded trademarks and protected by the United States Patent and Trademark Office. Exclusively marketed by authorized resellers on amazon. com in order to ensure product warranty. Package Included: 1 x Optical Wireless Mouse 1 x USB Receiver
SANOXY Cables and Adapters; 2ft 14 AWG 15A 250V Power Cord (IEC320 C14 to IEC320 C19), Red
These IEC power cords are ideal for powering PDUs, servers, UPSs, and many more devices and appliances which use the IEC-60320-C20 inlet.
SANOXY Cables and Adapters; 15ft 12 AWG 20A 250V Heavy-Duty Power Cord (NEMA L6-20P to IEC 320 C19), Black
Featuring a C19 female connector on one end and an L6-20P male plug on the other, this power cord is the ideal solution for powering a server in a data center. Simply connect the C19 receptacle to your network device and plug the L6-20P connector into an L6-20R wall outlet.
SANOXY Cables and Adapters; 8ft 14 AWG 15A 125V Power Cord (NEMA 5-15P to IEC320 C15)
The IEC C15 power cord receptacle is commonly used in data center and kitchen appliances. The IEC C15 is perfect for applications such as connecting servers to power distribution Units (PDUs) and small appliances like electric kettles and griddles.
