SECO-LARM E-941S300R/LQ L Mounting Bracket for E-941SA-300RQ
E-941S300R/LQ
Seco-Larm Enforcer No Touch Request-to-Exit Sensor, White (SD-927PWCQ)
The ENFORCER "No Touch" Request-To-Exit Sensor uses IR technology to request egress from a protected area or activate a device with the simple wave of a hand. Since it requires no touch, this sensor is ideal for use in hospitals, clinics, labs, clean rooms (to reduce the risk of contamination), schools, factories, or offices. Sensing range up to 2 inches (5 cm). Reliable IR technology senses motion. No touch reduces the risk of cross-contamination. White plastic single-gang plate. 3A relay, triggers min. 0.5 sec. or as long as hand is near the sensor. LED illuminated sensor area for easy identification. LED changes color to show the relay is triggered. Quick-connect screwless terminal block.
Seco-Larm Enforcer Access Control Keypad, Outdoor, Sealed/Weatherproof
The Seco-Larm Weatherproof Outdoor Digital Access Keypad is standalone. All keypad features are programmed directly from the keypad and it is able to mount to a single-gang back box. It is designed with backlit keys for easy night time use. FEATURES: Two multi-colored status LEDs. All features are programmed directly from the keypad - no need for an external programmer. EEPROM memory protects programmed information in case of power loss. Optical tamper for added security. Circuitry is potted with epoxy for outdoor use. IP65 weatherproof rating, rugged aluminum construction. 12-15 VDC operation. 1, 010 Users (Output # 1: 1, 000 users, Output # 2: 10 users). 2 Form C relays, each rated 1 Amp at 30VDC. Each relay has programmable output time from 1-99 seconds or toggle. Output #2 can be programmed for use with a doorbell. 2 Egress inputs and 1 door sensor input. Also known as -Seco-Larm Enforcer Access Control Keypad, Outdoor, Sealed/Weatherproof
Enforcer Concealed Surface-Mount Magnetic Contact Sensor Switch, White
This surface-mount switch is the most basic sensor of any alarm system. Use it to monitor the opening and closing of doors, windows and entry points to your property. Hides wire terminals.
Heavy-Duty Magnetic Garage Door Switch-N.O. Contact for N.C. Circuits
OVERHEAD DOOR MOUNT NC CONTACT MAGNET MAGNET MOUNTED ON L BRACKET CONTACT IN DIE CAST ALUMINUM HOUSING WITH PRE WIRED 2 UPC: 632963604959 SKU: ADIB00CAIVNM4
SECO-LARM Enforcer EV-DWLWQ Wall-Mount Bracket for EV-122C-DVHVQ - White
Handy wall bracket specifically designed for Seco-Larm dome cameras. White.
secolarm sd995cd3q
Convert a cylindrical lock set into an electronic access controlled locking system with the Seco-Larm Door Strike, No Cut. This door strike is field selectable for fail safe or fail secure operation and can be used with just about any cylindrical door locking system. It features a reversible, non-handed design, allowing it to fit on either a right-handed or left-handed door. Its unique, shallow design makes it ideal for use with most metal doors. It's powered by a solenoid (not a buzzer coil), has a static strength of 1,500 lbs., and is built with a stainless-steel keeper for strength and durability. Included is a Door Strike, 2 Electrical Connectors, 2 Wiring Connectors, 2 Mounting Tabs, 2 Wood Screws, 4 Machine Screws, 2 Machine Screws (narrow), 2 Security Screws, 2 Anchor Nuts, and a Manual. Notes: For indoor use only; this strike has NO horizontal or vertical adjustments. SPECS: Manufacturer Part #: SD-995C-D3Q. Operating Voltage: 12/24 VDC. Current Draw: 12VDC; 24VDC. Latch Throw: 9/16 inch (15mm). Keeper Width: 1-7/16 inch (36mm). Static Strength: 1,500 lb. (680kg). Dynamic Strength: 70 lb.-ft (9.68kg-m). Endurance: 100,000 cycles (UL tested); 1,000,000 cycles (factory tested). Operating Temperature: 32 degrees to 120 degrees fahrenheit (0 degrees to 49 degrees celsius). Operating Humidity: 0 to 85 percent. Dimensions: 4-7/8 x 1-1/4 x 1-1/16 inches (124 x 32 x 27.5 mm). Credentials: CE, RoHS. Warranty: 3 Years.UPC NO:676544019282 SKU:ADIB07G58CS9F
Seco-Larm E-931-S35RRQ Enforcer Wall Mounted Photoelectric Beam Sensor with 35ft
SECO LARM E 931 S35RRQ NIR Reflective Photoelectric Sensor For outdoors gates, garage doors, etc Weatherproof IP66 construction for indoor/outdoor usage Dark ON operation Adjustable sensing distance Compact size SECO LARM E 931 S35RRQ NIR Reflective Photoelectric Sensor For outdoors gates, garage doors, etc Weatherproof IP66 construction for indoor/outdoor usage Dark ON operation Adjustable sensing distance Compact size Key Features For outdoors gates, garage doors, etc Weatherproof IP66 construction for indoor/outdoor usage Dark ON operation Adjustable sensing distance Compact size 12~240VDC / 24~240VAC Operation Current: Up to 40mA@12VDC Bracket and mountinghardware Included Pre wired 6ft 1.8 m cord New single gang box and wall mount brackets available Specifications Sensing Range: 0.5 to 35 0.1 11m Current Draw: Standby 12VDC@20mA 24VDC@10mA, Active 12VDC@40mA 24VDC@20mA Operating Voltage: 12~240VDC or 24~240VAC Response Time: 10ms Max Light Source: IR LED LEDs Red: Active LEDs Yellow: Standby Output: SPDT Relay Output Switching Capacity: 250VAC/1A, 30VDC/2A Enclosure: IP66 Waterproof Operating Temperature: 4 ~131 F 20 ~55 C
SECO-LARM Enforcer SM-217Q/W Miniature Surface-Mount Contact/Magnet
Use the N.O. wide-gap magnetic contacts for loose-fitting door and windows or other wide-gap applications are found.
SECO-LARM E-941S300R/ZQ Z Mounting Bracket for E-941SA-300RQ
E-941S300R/ZQ
SECO-LARM E-941S-600/UQ Glass Door U Mounting Bracket 600 Pound Series
E-941S-600/UQ
SECO-LARM Enforcer EV-DWSGQ Wall-Mount Bracket for EV-122C-DVB3Q - Gray
Handy wall bracket specifically designed for Seco-Larm dome cameras. Dark gray.
Seco-Larm Enforcer Overhead Door Magnetic Contact, Open/Closed Loop (SM-226L-3Q)
The Seco-Larm Enforcer Overhead Door-Mount Magnetic Contact, NO/NC is a contact switch designed for large doors and gates where regular contacts may be difficult to mount. The contact’s large gap allows use with even the largest doors, such as garage doors. The switch is contained in low-profile cast aluminum housing, and curved so that heavy vehicles can cross over without damaging it. - NO/NC contact switch - Use on large doors or gates - Magnet in gray ABS case mounted on L-shaped bracket - 24-inch wire leads enclosed in stainless-steel cable Rugged, Long-Lasting Construction Seco-Larm contacts have a unique rhodium plating which has gone through a special oxygen treatment to deactivate the surface, thus eliminating the absorption of organic impurities, polymer growth during operation, and the possibility of contact freezing. The switch is housed in weatherproof die-cast aluminum constructed for surface-mounting on a garage floor. It can withstand heavy vehicle pressure without damage. The switch is safely enclosed in an epoxy compound, and a 24-inch flexible stainless-steel cable gives complete protection to the switch wiring. The magnet is housed in a high-impact weatherproof ABS plastic case and can be mounted on a garage door with an "L"-shaped bracket, which minimizes the effect of steel doors on magnets. Technical Details - MPN: SM-226L-3Q - UPC: 676544006473 - Alarm circuit: Three-wire N. O. /N. C. Contact for either closed or open circuit alarm systems - Reed switch: Gold under-plating with deactivated rhodium outer-plating - Switch housing: Weatherproof die-cast aluminum - Magnet: Extra-strength Alnico 5 - Wire: 24 inches (61 cm), stainless-steel enclosure - Contact lifetime: 50 million cycles - Rating: 0.02A mp. /100VDC (max. ), 0.2A mp. /10VDC (max. ), 3W (max. ) - Temperature: -15 to 160 °F (-25 to 70 °C) - Dimensions: 4-3/8 x 1-3/4 x 7/16 inches (111 x 44 x 11 mm) - Gap: 2-3/4 inches (70 mm) - Listings: UL, RoHS
Seco-Larm Enforcer Power Distribution Board, 9-Outputs (PD-9PSQ)
The Seco-Larm Enforcer Power Distribution Board offers individually fused PTC-type (Positive Temperature Coefficient) outputs, allowing you to power multiple devices (such as CCTV cameras) with separate fusing for each. This provides a simple way to isolate any problems and ensure reliable power for the bulk of your system. The main power switch even has built-in surge protection to provide further protection against outages. The power distribution board includes a master input fuse, a backup fuse, and four outputs. Each output has an individual red LED status indicator to show you which device needs attention in case of a power problem.
Heavy Duty Door Strike for Wood Doors
Use the Enforcer Electric Door Strike for wood doors either at home or at the office for access control, increasing secuirty and convenience.
Seco-Larm Enforcer Extra Vibrating Receiver for E-37EV (E-37RV)
You can allow more than one person to receive alerts from your Seco-Larm Enforcer 3-Zone Alarm Pager System by adding the Seco-Larm Enforcer Extra Vibrating Receiver for E-37EV. This extra receiver works just like the original receiver to provide vibrating and audible alerts when your security system is triggered. Up to three receivers can be used with one transmitter. - Belt-clip receiver vibrates and sounds audible alarm - Color LEDs indicate which zone was activated - Stores the last six pages for easy recall - Low battery and unattended page indicators As a code-learning receiver, the vibrating pager can be programmed to receive signals from up to three different transmitters, allowing you to monitor up to three zones within a half mile of the receiver. Additionally, each transmitter can signal an unlimited number of receivers, so multiple users can receive alerts. More than two million possible coding combinations help ensure that the system cannot be tampered with by unauthorized users. Backup Memory Designed for reliable, continuous operation, the receiver features EEPROM memory that stores transmitter codes for up to one year without power. The battery-powered receiver also has a low battery indicator to alert you when the batteries need to be replaced. NOTE: Batteries not included. Technical Details MPN: E-37RV UPC: 676544013464 Number of Codes: Learns up to 3 transmitter codes Power: 3VDC (2 AAA alkaline batteries, not included) Battery Life: Approx. 1 month Current Drain: - Standby: 1mA - Active (Beep): 20mA - Active (Vibrate): 50mA Dimensions: 3 x 2-1/8 x 5/8 inches (76 x 54 x 16 mm) Weight: 1.6 ounces (45g) (without battery)
Enforcer DR-116-2.0TQ Digital Video Recorder - 2 TB HDD
The ENFORCER DR-1 series of Network H. 264-based DVRs are designed to be used with almost any CCTV system. Using H. 264 compression allows for more data to be stored on either one or two SATA hard drives (available at most electronics stores; one hard drive comes pre-installed on select DVR models). The DR-1 series are Network DVRs, allowing access over the Internet to view live video or stored contents remotely. Features * Product Type: Digital Video Recorder * Hard Drive Capacity: 2 TB * Ethernet Technology: Fast Ethernet * USB: Yes * HDMI: Yes * VGA: Yes * Product Family: DR-1 * Brand Name: Enforcer * Video Formats: H. 264 * Video Formats: D1 * Video Formats: MPEG * Video Formats: MJPEG * Product Type: Digital Video Recorder * Green Compliant: Yes * Green Compliance Certificate/Authority: RoHS * Hard Drive Capacity: 2 TB * Maximum Video Resolution: 1920 x 1080 * Ethernet: Yes * Ethernet Technology: Fast Ethernet * USB: Yes * HDMI: Yes * VGA: Yes * USB Standard: USB 2.0 * Height: 2.1" * Width: 11.8" * Depth: 10.1" * Certifications & Standards: CE * Product Series: DR-1 * Brand Name: Enforcer * Product Model: DR-116- 2.0TQ * Product Name: 16-Channel Audio/Video, 480PPS, 2TB HDD * Video Formats: H. 264 * Video Formats: D1 * Video Formats: MPEG * Video Formats: MJPEG * Recording Modes: Time Schedule * Recording Modes: Alarm * Recording Modes: Motion Detection * Recording Modes: Continuous * Package Contents: 16-Channel Audio/Video, 480PPS, 2TB HDD Software Media Power Adapter * Limited Warranty: 3 Year * Weight (Approximate): 10 lb
Seco-Larm Enforcer Xenon Strobe Light, 24VDC, Green Lens (SL-126-A24Q/G)
The Seco-Larm Enforcer Xenon Strobe Light, 24VDC is designed for informative signaling requirements, such as a home security system alert. The light's powerful xenon tube extends flash visibility for enhanced reliability. The strobe light also comes with an inner cover that protects the high-voltage xenon tube when the colored lens has been removed. Highly Reliable for Your Protection If the strobe light is being powered by a backup battery, as the battery is drained, the strobe light will continue to function. Additionally, incorrect polarity cannot damage the circuit or draw current.
Seco-Larm Enforcer Handheld Slimline RF Transmitters, 1-Button, 1-Channel (SK-919TP1H-BUQ)
The Seco-Larm Handheld Slimline RF Transmitters are compatible with all Seco-Larm Receivers (SK-910R, SK-910R2, SK-910R4) and operate up to 500 feet. They feature Seco-Larm's patented CodeBump technology and an LED transmission indicator. Rubber buttons eliminate damage caused by electrostatic discharge and helps make transmitter weatherproof. The transmitters come with two 3VDC lithium batteries, a visor clip, and a belt clip. Gold-plated battery clips and contact points extend the life of the transmitter. FEATURES: Magic LED only appears when buttons are pressed. Operates up to 500 feet. Over 68 billion ( 6.8 x 1010) possible codes. LED transmission indicator. Includes two 3VDC lithium batteries. Code changes every time transmitter button is pressed. Frequency: 315 MHz. Visor clip and belt clip included. Slim-line design: 3-1/2 x 2-3/16 x 1/2 inches (89 x 56 x 12 mm). NUMBER OF CHANNELS: 1.
Seco-Larm Enforcer Electric Door Strike, Fail-Secure (SK-990AQ)
The Seco-Larm ENFORCER Electric Door Strikes convert cylindrical locksets to an electronic access controlled locking system. They can be used on virtually any cylindrical door locking system. Use of a digital keypad ensures high security without the need for a key. Easily connects to SECO-LARM's SK-1011-SQ or SK-1311-SQ electronic keypads and is suitable for office-type applications. CE approved. TYPE: Fail-Secure, perfect for entrance door installations.
Seco-Larm Enforcer LED Strobe Light with Built-In Programmable Siren, Amber (SL-1301-SAQ/A)
?Operating life over 50, 000 hours (over 5.7 years). ?Same size as the SL-126Q strobe light. ?Simple 2-wire installation. ?High-impact resistant case. ?High-impact and heat-resistant lens. ?Reverse polarity protection. ?Visible in all directions. ?5 lens colors available Amber, Blue, Green, Red and Clear. ?5 Vertical LED strips (32 LEDs) increase visibility from various directions. ?6 different flashing options. ?Adjustable flashing speed. ?Backup battery available for continuous lighting applications. ?10 Vertical LED strips (54 LEDs). ?Built-in 100dB siren (programmable). ?Replacement Lens Ordering Information ?Xenon strobe lights with UL available. ?SL-1301-EAQ/BAQ/SAQ - Comparison Chart.
