SEDNA - 802.11 B/G Cardbus Wireless LAN Adapter
Products Description :
SE-WL-CB-01-11G is a wireless notebook adapter fully compliant with IEEE802.11g, communicates with any device that compliant with IEEE802.11g, IEEE802.11b, with wireless AP or Ethernet.
Features :
IEEE 802.11g, IEEE 802.11b supported, compliant with Wi-Fi
TCP/IP, NDIS3, NDIS4, NetBEUI supported
Two working modes available: Ad Hoc Mode and Infrastructure Mode
Transmission rate up to 54Mbps covers 300m
Network status auto detects and rate auto negotiable
Multilayer security: including WEP, SSID access settings
Supports the communication of desktop PC and notebook with WLAN
PnP supported
Wireless roaming supported
Specifications :
Standard and protocols supported : IEEE 802.11g, IEEE 802.11b, CSMA/CA
Bus Type : 32bitCardBus Type II
Frequency Range : 2.4~2.4835GHz
Transmission Rate : 54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9 Mbps, 6 Mbps, 11 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps
Channels : 13
Sequence Spread : DSSS(Direct Sequence Spread Spectrum)
Data modulation : BPSK, QPSK, CCK and OFDM(BPSK/QPSK/16-QAM/64-QAM)
Transmission type : CCK, OFDM
Transmission Distance : Up to 100m (indoor), up to 300(outdoor)
Antenna Gain : 2dBi
LED Indicator : LINK/ACT(wireless network)
Working Environment : Working temperature:0ºC~40ºC;
Store temperature:-20ºC~80ºC
Working humidity :10%~95% RH Non-condensing
OS supported : Windows XP/2003 /Vista /7/8
Package content :
1 x Cardbus wifi adapter
1 x Driver CD
SEDNA - USB 3.0 3 Port Hub / Charger ( Bc 1.2 Charging ) / Card Reader with Desk Organizer - White
Product Description: SEDNA SE-USB-HCR-303i USB 3.0 Hub / Card Reader and desk organizer is a simple yet highly effective solution for keeping your work area neat and organized. The multi-functional hub/card-reader kit also functions as your coffee holder, pen holder, and smart/mobile phone stand (even while charging). On top of that, it features slots and enough storage space for holding photos, memo notepads, and business cards. It even features a letter opener and copy holder service functions. The device comes with three USB 3.0 ports which can also be functioned as BC 1.2 charging port for your iPad / Smart Phone or other Tablet PC. The built-in all in one card reader for reading memory cards supports SD / SDHC, Memory Stick, Micro SD ( T-Flash ) etc The card reader can Support SDXC and Micro SD card same time, and can copy content of 1 card to the other without copying to your PC SE-USB-HCR-303i is lightweight, slim, and does not take up too much space. The sleek and professional design will enhance the look of your office space. The nightmare of an overcrowded desk is now a thing of the past. You can now get rid of the clutter and find exactly what you need at any time. Features: Made of durable plastic 3 Ports USB 3.0 Hub, transfer speed up to 5Gbps 3 x BC 1.2 Charing port can change your iPad.. etc up to 2.1A per port No driver installation needed for Windows, Linux and MAC OS Easy Install, Plug & Play, Hot Swappable Card reader supports MS/MS PRO DUO, XD, SD/MMC, and Micro SD cards Color available: White Specifications: Compliant to USB 3.0 spefication Revision 1.0 Compatible with USB 1.1, USB 2.0 and USB 3.0 devices USB specification 3.0 for data rates up to 5Gbps Backwards compatible with USB 2.0 and 1.1 ports BC 1.2 standard for USB Charging Support for SD cards with UHS Support SDXC up to 2T Support SDXC card and Micro SD card same time, can copy content of 1 card to the other without copying to your PC Support 4 Cards simultaneously Each slot detects native speed and transfers data at the maximum rate for each card Package Content: USB 3.0 Hub / All in One Card Reader AC adapter Platic holder and accessories
SEDNA - PCIe X1 Dual 10/100/1000 Gbps Ethernet Server Adapter ( Intel 82575EB Chipset), with low profile bracket
Intel 82575EB chipset PCI-Express 1.1 Base Specification Revision 1.1 High performance, reliability, and low power Ultra deep, packet buffer per channel lowers CPU utilization. Hardware acceleration that can offload tasks from the host processor The Controllers can offload TCP/UDP/IP checksum calculations and TCP segmentation Specification and Features: Ports: RJ45 * 2 Bus Type: PCI-E X1 Transmission Rate: 10/100/1000Mbps Chipset: for Intel 82575EB Boot Rom: Support BOOT ROM Ultra deep, packet buffer per channel lowers CPU utilization. Hardware acceleration that can offload tasks from the host processor. The Controllers can offload TCP/UDP/IP checksum calculations and TCP segmentation. 802. x flow control: Statistics for SNMP MIB II, Ethernet like MIB, and Ethernet MIB ( 802.3 z, Clause 30) Network standards: IEEE 802.1 p, IEEE 802.1Q, IEEE 802.2, IEEE 802.3 ac, IEEE 802.3 az, IEEE 802.3 x, IEEE 802.3 z, IEEE 802.3 ad LEDs indicators: 4 x Led for link/Activity/Speed status Management Features: WoL, PXE remote boot, ISCSI boot, VLAN filtering, ESXI, ROS. Link Aggregation and Load Balancing Switch dependent: 802.3 ad (LACP), Generic Trunking ( GEC / FEC) Switch and NIC Independent Failover Priority queuing – 802.1 p layer 2 priority encoding Virtual LANs – 802.1 q VLAN tagging Jumbo Frame ( 9.5KB ) Support system: Microsoft Windows* (Win Xp to Windows 10, 32 & 64 bit), SCO UnixWare* 7. x, Open Unix* 8.0, Novell ODI*, Novell Netware*, SUSE Linux Enterprise Server* 9.0, Red Hat Enterprise Linux* 4.0, Linux*, FreeBSD*, Sun Solaris*, VMWare ESX* Package Content: 1 x 2 Port PCIe Gigabit Ethernet Network Card 1 x Low Profile Bracket 1 x Driver CD
Sedna Desktop 10-Port USB 3.0 Hub with iPad Port
Sedna Desktop 10-Port USB 3.0 Hub with iPad Port
SEDNA - Internal 4 Port USB 3.0 Hub ( Floppy Bay )
Specifications:
• Fits desktop PC 3.5" Floppy Bay
• 4 x USB 3.0 Super Speed Downstream Port
• Power Indicator
• USB 3.0 specification rev. 1.0 compliant
• USB 2.0 specification rev. 2.0 compliant
• Supports Super Speed 5 Gb/s, High-Speed 480 Mb/s, Full-Speed & Low-Speed, Max. 5 Gb/s USB transfer rate ( This must be connected to a USB 3.0 host port to get USB 3.0 speed )
• Direct Power from PC Power Supply to each USB Port
• Plug & Play
• No drivers need for Windows, Mac OS 10.X & Linux
• Color Available : Black
• Connectors : Type A USB 3.0 Adapter, 20 Pin to 2 x Type A adapter included, 4 Pin Power connector for PC Power supply
Package Includes:
SE-USB3-IHUB-304
20 Pin to 2 x Type A adapter
4 x Mounting screw
Sedna 3.5" Internal 7-Port USB 3.0 Floppy Bay Hub
Specifications: * Fits desktop PC 3.5" Floppy Bay * 7 x USB 3.0 Super Speed Downstream Port * Power Indicator * USB 3.0 specification rev. 1.0 compliant * USB 2.0 specification rev. 2.0 compliant * Supports Super Speed 5 Gb/s, High-Speed 480 Mb/s, Full-Speed & Low-Speed, Max. 5 Gb/s USB transfer rate ( This must be connected to a USB 3.0 host port to get USB 3.0 speed ) * Direct Power from PC Power Supply to each USB Port * Plug & Play * No drivers need for Windows, Mac OS 10. X & Linux * Color Available: Black * Connectors: Type A USB 3.0 Adapter, 20 Pin to 2 x Type A adapter included, 4 Pin Power connector for PC Power supply Package Includes: SE-USB3-IHUB-307 20 Pin to 2 x Type A adapter
SEDNA - USB 150Mbps Nano Wireless N Network Adapter - 802.11n/g 1T1R USB WiFi Adapter
Feature and Specifications :
Ralink chipset
High-performance wireless devices,ensure a fast, reliable connection to wireless routers and access points with 802.11n compatibility
Ultra-compact form factor for portability and unobtrusive installation in almost any scenario
Compliant with IEEE 802.11n ( 2.4GHz)standard, with transfer rates up to 150Mbps
1T1R with 150Mbit/s data rate
USB 2.0 interface
QoS, multiple BSSID, Cisco CCX 5.0
Advanced power management
Driver support : Winxp, Vista,Win 7, Win8, Linux and Mac OS
size : 19x14x4 mm
Package Content :
1 x USB Wifi Adapter
1 x Driver CD
SEDNA - 3.5" Floppy Bay 2 Port USB 3.0 Front panel ( 20 Pin Connector )
Features: • With the USB 3.0 front panel, you can add easily 2 x USB 3.0 Port to front of your PC. • Fits to 3.5" Floppy Bay • USB 3.0 20Pin connector, connect directly to 20 pin USB 3.0 socket of your mother board • USB 3.0 cable length: 55 cm • Material: Plastic • Support System: All Package Content: • 1 x Front Panel • 4 x mounting screw
SEDNA - Mega 2560 R3 Development Board ( Arduino Mega 2560 R3 Compatible )
SEDNA - Mega 2560 R3 is micro-controller board based on ATMega 2560. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UAR Ts (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It is based on the Open source Arduino Mega 2560 and is fully compatible to it. It also fits to all shield designed for Arduino. Technical Specifications: Microcontroller: ATmega2560 Operating Voltage: 5V Input Voltage (recommended): 7-12V Input Voltage (limit): 6-20V Digital I/O Pins: 54 PWM Digital I/O Pins: 14 Analog Input Pins: 16 DC Current per I/O Pin: 40 mA DC Current for 3.3V Pin: 50 mA Flash Memory: 256 KB Flash Memory for Bootloader: 8 KB SRAM: 8 KB EEPROM: 4 KB Clock Speed: 16 MHz Package Content: 1 x Arduino Mega 2560 1 x USB Cable
SEDNA - 4 Port USB KVM Switch ( with 4 set of USB KVM cables and 4 set of Audio cables )
Features :
It is portable and delicate in design
Control 4 PC with 1 mouse, key board and monitor
Support Microsoft Intellimouse, Logitech Net mouse, ..etc
Supports Windows 98SE/ME/2000/XP/2003 Server/Vista, Linux, or Mac OS
Support Hot Plug, can add or remove PC without powering off the system
Support Max. resolution 2048x1536 ( frequency width : 250MHz )
Support Auto-scan function ( every 8 seconds )
LED Display for status monitor
One USB Hub port built in
With speaker and microphone support
Switch Mode : Push button, Hot-key switch, Switch via mouse
System Requirements
·Type A USB Keyboard
·Type A USB Mouse
·VGA or SVGA Compatible Monitor
·Microphone and Speaker(optional)
·Windows 98SE/ME/2000/XP/2003 Server/Vista, Linux, or Mac OS
Package Content :
·4 Port USB KVM switch
·Quick Installation Guide
·Utility CD-ROM
·4 Sets of USB KVM Cables
·4 Sets of Audio Cables
USB 2.0 Super G 108M 802.11G Wifi Adapter Dongle
TL-WN620G Wireless G Network Adapter
Complying with IEEE 802.11g, the TL-WN620G adopts Super and Extended Range WLAN transmission technologies, resulting in transmission speeds of up to 108M.
The TL-WN620G provides multi security protection. Complying with 64/128/152-bit WEP Encryption, WPA/WPA2, IEEE 802.1X, TKIP and AES, the TL-WN620G has super-safety data communication abilities. With its strong firewall, the TL-WN620G features effective security to protect the wireless network from intruders.
With the internal antenna, the TL-WN620G can fit different operational environments and let the user connect to the Wireless network easily. The TL-WN620G also supports Seamless Roaming and is compatible with other 11b, 11g WLAN equipments.
Features
Complies with IEEE 802.11g, IEEE 802.11b
Adopts Super G™ WLAN transmission technology, transmit speed auto-negotiation, up to 108M
Adopts Extended Range™ WLAN transmission technology, transmission distance is 2-3 times of the normal 11b, 11g products, transmission range extended to 4-9 times.
A-type Female USB connector
Provides 64/128/152-bit WEP Encryption,
Supports WPA/WPA2, IEEE 802.1X, TKIP, AES
Supports Windows 98SE, Me, 2000, XP, Win 7
Provides simple configuration and supervisor program
Supports Ad-Hoc/Infrastructure modes
Supports Wireless Roaming, can move among different AP and no break
Specifications
General Specifications
Device Type : Wireless Adapter
Interface : USB 2.0
Networking Protocols and Standards
Wireless Network Standards : IEEE 802.11g
IEEE 802.11b
Wireless Data Transfer Rates : 108 Mbps
Wireless Network Configuration : Ad-Hoc (Peer-to-Peer)
Infrastructure
Wireless Indoor Range : 100 Meters
Wireless Outdoor Range : 300 Meters
Wireless Transmit Power : 17 dBm
Wireless Frequency Range : 2.4 - 2.4835 GHz
Security Protocols : WPA
128-bit WEP
64-bit WEP
152-bit WEP
WPA2
Modulation Technology : DBPSK
DQPSK
CCK
OFDM
Package Content :
USB Wifi adapter
Driver Cd
User Manual
SEDNA - 802.11 B/G 108M Super G Wireless LAN Cardbus Adapter
Products Description :
SE-WL-CB-01-SG is a wireless notebook adapter fully compatible with IEEE802.11g, communicates with any device that compliant with IEEE802.11g, IEEE802.11b, with wireless AP or Ethernet
Features :
IEEE802.11b, IEEE802.11g supported, compliant with WiFi TCP / IP, NDIS3, NDIS4, NetBEUI
Two working modes available : Ad Hoc Mode and Infrastructure mode
Transmission rate up to 108Mbps, covering 300m
Network status auto detection and rate auto negotiation
Multi-layer security : including WEP, SSID access settings
Supporting the communication of desktop PC and network with WLAN
UPnP supported
Wireless roaming supported
Specifications :
Protocol and Standards : IEEE 802.11g; IEEE 802.11b; CSMA/CA
Interface : 32-bit CardBus Type II
Frequency : 2.4~2.4835GHz
Transmission Rate : 108/54/48/36/24/18/12/9/6/11/5.5/3/2/1 Mbps
Channel : 13
Spread Spectrum : DSSS
Modulation : BPSK, QPSK, CCK and OFDM(BPSK/QPSK/16-QAM/64-QAM)
Transmission type : CCK, OFDM
Antenna Gain : 2dBi
LED Indicators : LINK/ACT(wireless network)
Environment :
Working temperature:0ºC~40ºC;
Store temperature:-20ºC~80ºC
Working humidity :10%~95% RH Non-condensing
Operating System : Windows9x/Me/2000/NT/XP/2003/Vista /Win 7
SEDNA - USB 2.0 3 Port - 2.5" Grommet Hole - 2.5" In Desk Hub
Features and specifications: Fits in a 2.5" grommet hole on your desk with 3 USB 2.0 Ports Transfers data at speeds of up to 480Mbps Downward compatible with USB 1.1 devices Installs with Plug-and-Play ease Y USB cable for extra power connection Package Content: 1 x USB 2.0 3 Port Hub
SEDNA - 4 Port USB 3.0 3.5" Floppy Bay Front Panel ( 2x 20 Pin USB 3.0 Connectors )
Features: • With the USB 3.0 front panel, you can add easily 4 x USB 3.0 Port to front of your PC. • Fits to 3.5" Floppy Bay • 2 x USB 3.0 20Pin connector, connect directly to 20 pin USB 3.0 socket of your mother board • USB 3.0 cable length: 60 cm • Material: Metal • Support System: All Package Content: • 1 x Front Panel • 4 x mounting screw
Sedna SE-USB3-HUB-34A-BK 4-Port USB 3.0 Hub Including 1 Foldable Port
Features: * Color: Black * Plastic material: Engineering grade Poly Carbonate * With 3 horizontally mounted 5Gbps ports and 1 Vertical foldable port * Transfers your data at up to 5Gbps ( Upgraded to support Win 8 ) ( You must have a USB3 host port for this hub to have 5Gb/s speed ) * Installs easily with Plug-and-Play convenience * Works seamlessly with all your USB 1.1, USB 2.0 and USB 3.0 Super Speed devices * Slim design, saves desk space * Supports "hot swapping" of all your USB devices * Power status LED * Over-current protection * Full approved Eup Compliant 5V 4A AC/DC adapter Specifications: * Compliant to USB 3.0 spefication Revision 1.0 * Compatible with USB 1.1, USB 2.0 and USB 3.0 devices * USB specification 3.0 for data rates up to 5Gbps ( Connected to USB 3.0 host ) * Backward-compatible support for USB 1.1 and USB 2.0 System Requirements: For PC Users: Pentium® processor-based computer with USB 3.0 port available, Windows XP and Vista, Windows 7/8 Package Includes: * SE-USB-HUB-34A 4 Port Hub * Switching type Power Adapter ( 4A) * USB 3.0 Cable
Sedna - USB 3.0 4 Port USB 3.0 Internal Hub ( 3.5" Bay with 5.25" bay mounting kit included )
Specifications:
• Fits desktop PC 3.5" Floppy Bay and 5.25" CDROM bay ( with mounting kit included )
• 4 x USB 3.0 Super Speed Downstream Port
• Power Indicator
• USB 3.0 specification rev. 1.0 compliant
• USB 2.0 specification rev. 2.0 compliant
• Supports Super Speed 5 Gb/s, High-Speed 480 Mb/s, Full-Speed & Low-Speed, Max. 5 Gb/s USB transfer rate ( This must be connected to a USB 3.0 host port to get USB 3.0 speed )
• Direct Power from PC Power Supply to each USB Port
• Plug & Play
• No drivers need for Windows, Mac OS 10.X & Linux
• Color Available : Black
• Connectors : Type A USB 3.0 Adapter, 20 Pin to 2 x Type A adapter included, 4 Pin Power connector for PC Power supply
Package Includes:
SE-USB3-IHUB-304
20 Pin to 2 x Type A adapter
4 x Mounting screw
SE-HDD-S03 3.5 to 5.25 mounting kit
SEDNA - 2 Port USB KVM Switch (with cables)
Features :It is portable and delicate in design Support Microsoft Intellimouse, Logitech Net mouse, ..etc Supports Windows 98SE/ME/2000/XP/2003 Server/Vista, Linux, or Mac OS Support Hot Plug, can add or remove PC without powering off the system Support Max. resolution 2048x1536 ( frequency width :250MHz ) Support Auto-scan function ( every 8 seconds ) LED Display for status monitor One USB Hub port built in With speaker and microphone support Switch Mode :Push button, Hot-key switch, Switch via mouseSystem Requirements ·Type A USB Keyboard ·Type A USB Mouse ·VGA or SVGA Compatible Monitor ·Microphone and Speaker(optional) ·Windows 98SE/ME/2000/XP/2003 Server/Vista, Linux, or Mac OSPackage Content :·2 Port USB KVM switch ·Quick Installation Guide ·Utility CD-ROM ·2 Sets of USB KVM Cables ·2 Sets of Audio CablesProduct informationPackage Dimensions8.46 x 4.13 x 3.15 inchesItem Weight1.1 poundsManufacturerSEDNAASINB00FK1ALRGCountry of OriginChinaItem model numberSE-KVM-USB-22Best Sellers Rank#4,521 in KVM SwitchesDate First AvailableOctober 1, 2013Warranty & SupportProduct Warranty:For warranty information about this product, please click here FeedbackWould you like to tell us about a lower price? VideosPage 1 of 1Start OverPage 1 of 1Previous pageVideos for related products 6:45Click to play videoDual Monitor KVM Switch For 4 Computers Great-HTVideos for related products 3:18Click to play videoHDMI+VGA Dual Monitor Kvm Switch 2 Port Extended Display SweetySunVideos for related products 3:32Click to play videoTESmart KVM Switch 4 Port HDMI | 4K 60Hz Ultra HD | Multimedia with Audio Output TESmartVideos for related products 5:59Click to play videoHow to connect KVM switch HDMI dual monitor 4k@30Hz sjsmtekVideos for related products 2:30Click to play videoKVM Switch 2 In 1 Out 4K@30Hz S7206H Great-HTVideos for related products 5:32Click to play videoHDMI KVM Switch 4 In 1 Out For 4 Computers Great-HTVideos for related products 2:33Click to play videoCKLau 4Kx2K@60Hz HDMI KVM Switch Installation and User Guide CKLAU TECHNOLOGIES INCVideos for related products 4:50Click to play video8/16 Port KVM HDMI switch with remote control & 4/8 Pcs 5ft KVM Cables TESmartNext pageUpload your video Customer Review:Dual Monitor KVM Switch For 4 ComputersSee full review Great-HTOnsite Associates ProgramAmazon Influencer Customer Questions & Answers
SEDNA - 2.5" Grommet Hole In Desk QI Wireless Charger for Smart Phone and all other Electronics Devices ( Compatible with iPhone 8 / 8 Plus / X )
Features and specifications: Ccompatible with iPhone 8/ 8 Plus and X Fits 2.5" Grommet Hole in your desk. Space sacing. Your desktop can be neatly organized QI standard compatible. Can be used for all Smart Phone or other devices with QI charging standard Works for any devices that support WPC-wireless charging from Samsung, HUAWEI, LG, HTC and Blackberry etc. Simply place your device that is capable for wireless charging. No cables or USB interface required. Blue LED indicator showing wireless charging status Fast charging for all device up to 1A current Over charger protection 1.5A input, 1A output, 70% efficiency Charging controller: TI Power source cable length: 1.2 Meter Package Content: •1 x Wireless Charger •1 x AC/DC adapter •1 x Use Manual
SEDNA - USB 3.0 4 Port Hub, Low Cost Portable Slim Design, Black ( SE-USB3-HUB-314-BK)
Features: Slim Portabe design Color: White With 4 x 5Gbps ports Transfers your data at up to 5Gbps Installs easily with Plug-and-Play convenience Works seamlessly with all your USB 1.1, USB 2.0 and USB 3.0 Super Speed devices For any USB 3.0 Hub to work at 5Gbps, your host port must also be USB 3.0 standard Supports "hot swapping" of all your USB devices 4 x USB data indication LED Powered by USB, if you need to support high power devices, please select our other verson with AC/DC adapter AC/DC adapter not included Specifications: Compliant to USB 3.0 spefication Revision 1.0 Compatible with USB 1.1, USB 2.0 and USB 3.0 devices USB specification 3.0 for data rates up to 5Gbps Backward-compatible support for USB 1.1 and USB 2.0 System Requirement: For PC Users: Pentium® processor-based computer with USB 3.0 port available, Windows XP and Vista, Windows 7 / 8 / 8.1 Available USB 3.0 Host Port Package content: SE-USB-HUB-314A 4 Port Hub USB 3.0 Cable
SEDNA Desktop 10 Ports USB 2.0 Hub w/ AC-DC Adapter
Features: Color: Black Plastic material: Strong Engineering grade Poly Carbonate With 9 horizontally mounted 480Mbps ports and 1 Vertical foldable port Vertical port is best for USB WiFi dongle for better reception and USB pen disk Transfers your data at up to 480Mbps Installs easily with Plug-and-Play convenience Works seamlessly with all your USB 1.1 and USB 2.0 devices Slim design, saves desk space Supports "hot swapping" of all your USB devices Power status LED Over-current protection Specifications: Compatible with USB 1.1 and USB 2.0 devices USB specification 2.0 for data rates up to 480Mbps Backward-compatible support for USB 1.1 System Requirements: For PC Users: Pentium® processor-based computer with USB 2.0 port available, Windows® 98 SE, 2000, Me, XP and Vista, Windows 7, 8 For Mac® Users: Supports low- ( 1.5M bps), full- (12Mbps), and high-speed (480Mbps) modes on Power Mac computers equipped USB 2.0 port and OS 10.2. 7 and above. Package Includes: SE-USB-HUB-10A USB 2.0 10 Port Hub Switching type Power Adapter ( 5V 4A AC/DC Adapter) USB Cable
SEDNA - USB 3.0 7 Port SuperSpeed Hub with ON/OFF Switch and 1 x iPad Charging Port ( Black )
Features: Color in stock: Black With 7 horizontally mounted 5Gbps ports 1 iPad Charging ready ( 1.7A ) port ( this port is not compatible with USB 2.0 ) Power Switch for each USB Port Transfers your data at up to 5Gbps Installs easily with Plug-and-Play convenience Works seamlessly with all your USB 1.1, USB 2.0 and USB 3.0 Super Speed devices Supports "hot swapping" of all your USB devices power status LED for each USB port Over-current detection and safety Full approved Eup Compliant 5V 4A AC/DC adapter Specifications: Compliant to USB 3.0 spefication Revision 1.0 Compatible with USB 1.1, USB 2.0 and USB 3.0 devices USB specification 3.0 for data rates up to 5Gbps Backward-compatible support for USB 1.1 and USB 2.0 iPad charging port current: 1.7A USB 3.0 cable length: 1 meter System Requirements: For PC Users: Pentium® processor-based computer with USB 2.0 port available, Windows XP and Vista, Windows 7, Winodws 8 Package Includes: SE-USB3-HUB-317i 7 Port Hub ( Black ) Switching type Power Adapter ( 4A) USB 3.0 Cable Approval:: CE / FCC
Sedna Internal USB 3.0 7 Port Hub ( 3.5" Floppy Bay with 5.25" DVD ROM Mounting Kit )
Specifications and Features: • Fits desktop PC 3.5" Floppy Bay • Include 5.25" DVD ROM mounting kit • 7 x USB 3.0 Super Speed Downstream Port • Power Indicator • USB 3.0 specification rev. 1.0 compliant • USB 2.0 specification rev. 2.0 compliant • Supports Super Speed 5 Gb/s, High-Speed 480 Mb/s, Full-Speed & Low-Speed, Max. 5 Gb/s USB transfer rate ( This must be connected to a USB 3.0 host port to get USB 3.0 speed ) • Direct Power from PC Power Supply to each USB Port • Plug & Play • No drivers need for Windows, Mac OS 10. X & Linux • Color Available: Black • Connectors: Type A USB 3.0 Adapter, 20 Pin to 2 x Type A adapter included, 4 Pin Power connector for PC Power supply Package Content: 1 x SE-USB3-IHUB-307 1 x 20 Pin to 2 x Type A adapter 4 x Mounting screws 1 x 5.25" DVD ROM mounting bracket 4x 3.5" to 5.25" mounting kit screws
SEDNA - Retro Style Telephone Handset for iPhone / iPad
Features: Special designed for iPhone / iPad series Unique retro telephone style designed Stylish design, finnest plastic texture High quality sound performance High quality voice transmission Compatible with iPhone / IPad series Color Available: Black Specification: Sensitivity: 111dB + /- 3% Impedance: 150 ohm Frequency: 20~20000 Hz Retractable cable length: 50~80 cm Standard 3.5 mm Audio Jack to fit iPad / iPhone Package Includes: 1 x Telephone Style Headset 1 x Detachable coil cable
SEDNA - 13 Port USB 3.1 Gen I Hub (5Gbps) - 19 Inch 1U Rack Mount
Features: Industrial USB 3.1 Gen I hubs for instant USB expansion Rugged 1U 19? Rack Mountable enclosure 13x Downstream 5Gbps USB 3.1 Gen 1 ports for data transfer Transfers your data at up to 5Gbps Installs easily with Plug-and-Play convenience Works seamlessly with all your USB 1.1, USB 2.0 and USB 3.0, and USB 3.1 Gen I devices 1U server cabinet mounting design, best for Server, IOT applications, Industrial Control and USB storage device data replication Supports "hot swapping" of all your USB devices Power status LED Over-current protection Full approved Eup Compliant 5V4A AC/DC adapter ( other heavy duty power adapter option available 5V6A-10A) Specifications: Size: 483x 44.5 x135mm ( 19 inch 1U Rack Mount Compatible ) Compliant to USB 3.1 Gen I spefications ( 5Gbps ) Compatible with USB 1.1, USB 2.0 and USB 3.0 devices Compatible with all Windows, Windows Server OS, Linux, Mac OS Package Content: 1 x 13 Port 1U USB 3.0 Hub 1 x Switching type Power Adapter ( 5V 4A) ( or optional 5V6A at request ) USB 3.0 Cable User Manual 2 x Server Cabinet Mounting Bracket and Screws
SEDNA - 2 Port USB KVM Switch ( with 2 set of USB KVM cables and 2 set of Audio cables )
Features: It is portable and delicate in design Support Microsoft Intellimouse, Logitech Net mouse,.. etc Supports Windows 98SE/ME/2000/XP/2003 Server/Vista, Linux, or Mac OS Support Hot Plug, can add or remove PC without powering off the system Support Max. resolution 2048x1536 ( frequency width: 250MHz ) Support Auto-scan function ( every 8 seconds ) LED Display for status monitor One USB Hub port built in With speaker and microphone support Switch Mode: Push button, Hot-key switch, Switch via mouse System Requirements ·Type A USB Keyboard ·Type A USB Mouse ·VGA or SVGA Compatible Monitor ·Microphone and Speaker (optional) ·Windows 98SE/ME/2000/XP/2003 Server/Vista, Linux, or Mac OS Package Content: ·2 Port USB KVM switch ·Quick Installation Guide ·Utility CD-ROM ·2 Sets of USB KVM Cables ·2 Sets of Audio Cables
SEDNA - M2 - B Key SSD ( SATA III ) to 2.5" SATA Adapter Card
Features and Specifications :
The SE-EH-M2-SATA-01 M2-B Key SSD ( SATA III ) to 2.5" SATA Adapter Card enables you to connect a 22x30 or 22 x 42 M2 SSD to a standard SATA
port, and mount the drive into any desktop PC.
The adapter maximizes the speed of your computer by adding the performance of an M2 SSD to any SATA enabled desktop computer.
Allowing for faster boot time, and increased performance in regular operation.
Number of Drives supported : 1
Drive Type : M2-B Key SSD ( SATA III )
Drive Installation : Fixed
Transfer Rate : SATA III (6 Gbps)
Support 22x30 or 22x42 M2 SSD
Fully Compatible with SATA II/III
size : 55 x 42 x 7 mm
Package Content :
1 x M2 to SATA adapter
1 x mounting screw
Sedna 3 Ports USB 3.0 Hub with Card Reader
Features :
3 x USB 3.0 Port
Transfers your data at up to 5Gbps ( This must be connected to a USB 3.0 host port to get USB 3.0 speed )
Installs easily with Plug-and-Play convenience
Built-in All in One Card Reader for memory cards
Card reader support SD / SDHC, Memory Stick, SM, Micro SD ( T-Flash ) etc
LED Indicators for power status
Supports "hot swapping" of all your USB devices
With 5V2A AC/DC adapters
Specifications:
Compliant to USB 3.0 spefication Revision 1.0
Compatible with USB 1.1 ,USB 2.0 and USB 3.0 devices
USB specification 3.0 for data rates up to 5Gbps
Backward-compatible support for USB 1.1 and USB 2.0
Package Includes:
USB 3.0 Hub / All in One Card Reader
AC adapter
USB cables
SEDNA - PCI 10/100 Ethernet Adapter (Realtek 8139)
32 bit PCI-bus Rev 2.1, PnP supported, full duplex Realtek RTL8139 chipset Compliant with IEEE 802.3 10BASE-T and IEEE 802.3 u 100BASE-TX Standard RJ-45 port, 10/100M auto negotiation, full/half duplex supported Description: SE-PCI-LAN-8139 is a 10/100M PCI Ethernet LAN card, fully compliant with PCI 2.2, auto negotiation and detects the rate of switches, hubs that connected and adjusts the transmission method and rate (10/100M, full/half duplex)... Features: 32 bit PCI-bus Rev 2.1, PnP supported, full duplex Realtek RTL8139 chipset adopted RPL/PXE supported Compliant with IEEE 802.3 10BASE-T and IEEE 802.3 u 100BASE-TX PCI 2.2 supported, supported PCI clock up to 40MHz Standard RJ-45 port, 10/100M auto negotiation, full/half duplex supported ACPI supported Remote waken-up supported Specifications: Standard supported IEEE 802.3 IEEE 802.3 u Bus Type: 32bit 33MHz PCI 2.1 Ports: 1 10 /100M RJ45 Transmission Media 10Base-T: Cat 3 UTP or above 100Base-TX: Cat UTP LED Indicator: Link/Act Working Environment: Working temperature: 0ºC~40ºC; Store temperature: -20ºC~60ºC Working humidity: 10%~90% RH Non-condensing; Storage Temperature: 5%~90% RH Non-condensing OS supported: Windows 9x / Me / NT / 2000 / XP / 2003 / Win Vista / Win 7, Netware, Linux Package content: 1 x PCI LAN Adapter
sedna - 2 port ethernet rj45 manual switch ( 2-in 1-out or 1-in 2-out )
2-In 1-Out or 1-In 2-Out Bidirectional Ethernet Desktop Switch,10/100Mbps Simple and convenient installation, manual button switch No exteernal Power needed Physical isolation between 2 different Output, no electrical interferenceSize : 80 x 50 x 22 mm Package content : 1 x SE-NET-SW-21
SEDNA - 2.5" Grommet Hole - In Desk - USB 3.1 Gen I 3 Port Hub/ BC 1.2 USB Charger with SD Card Reader
Features and specifications: Fits in a 2.5" grommet hole on your desk with 3 USB 3.1 Gen I Ports With SD / Micro SD Card Reader All Ports are also BC 1.2 charging conpatible LED indicator for power Transfers data at speeds of up to 5Gbps Maximum charing current 2.1A Total Maximum Charing current for all ports (4A) Downward compatible with USB 2.0 devices Installs with Plug-and-Play ease Fully approved EUP compliant 5V4A AC/DC adapter Package Content: 1 x USB 3.0 3 Port Hub / Card Reader 1 x 5V4A AC/DC adapter
SEDNA - 4 Port USB 3.0 Hub with AC/DC Adapter ( SE-USB3-HUB-304A), Red Color
Features: Color: Red / Black With 4 x 5Gbps ports Transfers your data at up to 5Gbps ( you must have a USB 3.0 host port available to get USB 3.0 speed) Installs easily with Plug-and-Play convenience Works seamlessly with all your USB 1.1, USB 2.0 and USB 3.0 Super Speed devices Stylish design Supports "hot swapping" of all your USB devices power status LED, 4 x USB data indication LED 5V3A AC/DC adapter Specifications: Compliant to USB 3.0 spefication Revision 1.0 Compatible with USB 1.1, USB 2.0 and USB 3.0 devices USB specification 3.0 for data rates up to 5Gbps Backward-compatible support for USB 1.1 and USB 2.0 System Requirements: For PC Users: Pentium® processor-based computer with USB 3.0 port available, Windows XP and Vista, Windows 7/8 Available host USB 3.0 Port Package Includes: SE-USB-HUB-304A 4 Port Hub Switching type Power Adapter USB 3.0 Cable
SEDNA - Desk Top 8 Ports 10/100 Fast Ethernet Switch
S21289 unmanaged DeskTop switch, with (8) 10/100BASE-TX ports, is one of the most popular switches in our product line. It is known for its exceptional performance and quality. The switch is compact in size, so that it can be placed anywhere on a desktop.Its power connector and ports are conveniently located in the rear to avoid messy cables on the desk.
Fully compliant with IEEE802.3 (10BASE-T), IEEE802.3u (100BASE-TX)
Straight and cross cables auto detect, Uplink port ready for any of the ports
Broadcast storm protection supported, Dynamic buffer Assign and network load balance, Avoids package loss
8 10/100Mbps fast Ethernet ports
External power adaptor, low consumption
Full and half duplex modes supported
1K MAC address
MAC address auto learning and refreshing
2Mb fast packet buffer
Mini Plastic Skin, Desktop Mount
Specifications :
Transmission Media : 10Base-T:Cat 3 or above UTP
100Base-TX:Cat 5 UTP
Network Interface : RJ-45: 100ohm, UTP/STP cable
10/100Base EIA/TIA Categories 3 or 5 cable
Switching Method/Buffering store-and-forward, On-chip 2MB packet buffering
Speed : - Switch Fabric: 4.8Gbps
- Packet forward rate (100M bps port): 1,480,000Mpps
- Packet forward rate (10M bps port): 1,480,000Mpps
LED Indicator : Link/Act for each port, Power
MAC Table : 8,000 Entries
Filtering/ Forwarding/Learning Rates : Full line rate/full wire speed
Physical Specifications :
Weight: (0.8 kg.)
Plastic Housing
Side Air Vents with Fan-less Air-Cooling Design
LEDs : Power
Link/Act (activity)
Working Environment :
Operating temperature:0ºC~40ºC
Store temperature:-40ºC~70ºC
Operating humidity :10%~90% RH Non-condensing;
Storage Temperature:5%~90% RH Non-condensing
Power Requirements :
AC110~220V, , 50 to 60 Hz, External Power Supply
Max Power Consumption: 2.5W
Package :
8 Port switch
User Manual
AC adapter
SEDNA - USB 2.0 Super Small size Micro SD / T-Flash Memory Card Reader ( 2 pieces pack )
Features: 2 pieces per package Super small size Support Micro SD / T Flash memory card USB 2.0 transfer speed up to 480Mbps Color: Black Plug & Play, Hot-swap System Requirements: Windows XP/Vista/7/8/10, Mac OS, Linux Dimension: 26*18*6mm Weight: 10 g Package Content: 2 x USB 2.0 Micro SD/TF Card Reader
sedna - 5 port 10/100mbps desktop poe switch
Features and Specifications : 4 x 10/100Mbps Auto-Negotiation POE Port ( 1 x Uplink Port ) Transfer speed : 100Mbps Supported Protocol : IEEE 802.ei, IEE 802.3u, IEEE 802.3x, IEEE 802.1af, IEEE 802.3af VLAN Support : Yes POE Power support : 65W ( Port 1 to 4 ) DC 48V, 1.25A Output Smart PoE Power Supply, automatically identification, never destroy the front equipment Full power protection POE Output LED Indicators : 4 x POE ( Blue), 4 x Data transfer ( Green ), 1 x Uplink ( Green ), 1 x Power ( Red ) Supported PoE devices : IP cameras, WLAN Access Point, IP Phones ..etc. Full Metal case Stackable : No size : 89x68x22mm Working condition : Temperature : 0-40 Degree C, Humidity : 10-90% RH package content : 1 x se-ns-poe-105 switch 1 x 48V 1.25A AC/DC adapter 1 x Power cord
SEDNA - USB Bluetooth 4.0 Adapter Dongle ( CSR Chipset )
Support Win Xp, Win Vista, Win 7 / Win8 CSR8150 chipset Bluetooth V 4.0, class 1 Can be connected to Notebook, Ultrabook, Desktop PC Compliant with Blue 2.1 +EDR, Bluetooth 3.0 _ HS, Bluetooth 4.0 LE standard Support Wake-On-Bluetooth Size: 23x16x7 mm Package content: 1 x Bluetooth Dongle 1 x Driver CD
Sedna Desktop 16-Port 10/100 Ethernet Switch
Features: SE-NS-1016 DeskTop switch enable you to establish own network by its first -class stability and easy using feature. The SE-NS-1016 is compact in size, so that it can be placed anywhere on a desktop. It also comes with a wall mount kit as an installation option so that it can be conveniently mounted on a wall. Its power connector and ports are conveniently located in the rear to avoid messy cables on the desk. SE-NS-1016 is specially designed for the SOHO network, especially for the medium/small enterprises. With great stability and easy-to-use, the Switch can assist you to organize your network. To ensure 16 10/100Mbps ports without congestion, it adopts Infineon chip design scenario and up to 3.2G bps backplane bandwidth. Furthermore, it integrates 4K MAC address table and automatically study MAC address. Moreover, it supports multiple functions such as NWAY Auto-Negotiation, Auto MDI/MDIX. Without considering network management, you can own a stable and effective network. 16 10/100Mbps ports connect to the workstation and support Auto MDI/MDIX to simplify network fragment and maintenance Complies with IEEE 802.3, IEEE 802.3 u Ethernet Standards Supports NWAY auto-negotiation function, auto detect transmission rate and duplex models, UPnP and automatically chooses the best network connectivity mode Supports IEEE 802.3 x full-duplex flow control and half-duplex backpressure flow control Supports non-blocking line speed transfer Adopts store-and–forward mode, supports MAC address studying automatically and integrates 4K MAC address table to desire all kinds of application. Easy-to-use external Power Specifications: Transmission Media: 10Base-T: Cat 3 or above UTP 100Base-TX: Cat 5 UTP LED Indicator: Link/Act for each port, Power Physical Specifications: Weight: ( 1.0 kg. ) size: 248 x135 x35 mm Plastic Housing LEDs: 16 LED per port, Power Working Environment: Operating temperature: 0ºC~40ºC Store temperature: -40ºC~70ºC Operating humidity: 10%~90% RH Non-condensing; Storage Temperature: 5%~90% RH Non-condensing Power Requirements: AC110~220V,, 50 to 60 Hz, External Power Supply Max Power Consumption: 8W
Sedna - PCI Express USB 3.0 7 Port Adapter (Support Win 8 Uasp, Super Fast Speed), SATA Power connector
Specifications: Newest Solution, Supports USAP ( USB Attached SCSI Protocol ) of Windows 8 Most probably the fastest USB 3.0 7 Port Adapter Card in the market Maximum speed is about 385MB/s ( see testing result photo ) No Driver needed for Windows 8 ( Do not install driver for Windows 8 ) PCIE X1 , 2.0 standard, VLI chipset 5 x external and 2 x internal USB3.0 port Each port provides DC 5V 1A via USB 3.0 connector Connect to PC power supply with SATA Power Connector Transfer Rate: 5Gbps, 480Mbps, 12Mbps Fully compatible with usb 3.0, USB2.0 , USB 1.1 and USAP Supports Windows XP / 2003 / Vista / 7 / 8 Fits perfectly with our 2 Port USB 3.0 front panel ( SE-FP-USB3-02 ) ( not included) Package contents: 1 x PCIE USB 3.0 adapter 1 x Driver CD
SEDNA - PCIE 10/100/1000 Gigabit Ethernet Adapter ( Marvell 805 Chipset )
Features and Spediciations: A high performance 1000BASE-T Ethernet controller card Backward compatible to 10/100BASE-T networking Fully compliant with PCI Express Supports one-lane 2.5G bps PCI-e specification 10/100/1000Mbps data rate auto negotiation operation Compatible to existing CAT-5 UTP cabling Crossover Detection and Auto Correction operation Compliant with IEEE 802.3 / 802.3 u/ 802.3 ab Easy plug & play Supports Drivers Windows 8, Windows 7/Vista/XP/2000/ME/2003, Linux 2.4X / 2.6X Package content: 1) PCIE Network Card 2) Driver Cd
SEDNA SE-FP-ESATA-1-BK- 2 Port eSATA Floppy Bay Front Panel with Power Connector (Black)
Features:
• Color: Black
• Fit Front Floppy Bay of your desktop PC
• High quality plastic and connector, long lasting and highly reliable
• Connect SATA I/II/III Port of your mother board to front of your PC, and use this port as eSATA ports on front of your PC
• Power connector to your PC Power Supply, you can get the 5 and 12V DC supply from the front panel
• Support SATA III Specifications, transfer speed up to 6Gbps
• Easy Installation
• No driver needed
• Support all OS
Package Content:
• eSATA Front Panel
SEDNA Powerline AV Adapter 2-Pcs. Kit - Communication to Ethernet Switch Up to 85Mbps (SE-HP-T3)
Description :
Homeplug networking uses the existing electrical wiring around your home to create a network that is capable of being used by multiple computers. If your wireless or conventional broadband connection is terminated in an inconvenient location, or you simply want to add extra computers, they are an ideal way of distributing the signal around a building, without the potential hassle of trying to use wireless to enable the entire home.
They will even connect outhouses, workshops etc - the only restriction being that all units must be on the same electricity meter, and the range is limited to approximately 100m of wiring circuit.
With the addition of a wireless Homeplug, you can have access for a laptop, for example, in any room you choose. Simply plug the unit into an electrical outlet, and connect!
Specifiations :
2 pieces in a box
Small design with a new exterior, blends in completely in front of any electrical outlet
HomePlug Turbo standard compliant, high-speed data transmission rates of up to 85Mbps
56Bit DES encryption
No configuration required, just plug and play
Up to 100 meters range over the household power lines for better performance through walls and across floors
prices are for 2 pcs / box
SEDNA - 8 Port 10/100Mbps Desktop POE Switch
8 x 10/100Mbps Auto-Negotiation Port ( 7 x POE Ports ) POE Power support: 96W ( Port 1 to 7 ), DC 48V, 2A Output Smart PoE Power Supply, automatically identification Full Metal case Features and Specifications: 8 x 10/100Mbps Auto-Negotiation Port ( 7 x POE Ports ) Transfer speed: 100Mbps Supported Protocol: IEEE 802. ei, IEE 802.3 u, IEEE 802.3 x, IEEE 802.1 af, IEEE 802.3 af VLAN Support: Yes POE Power support: 96W ( Port 1 to 7 ) DC 48V, 2A Output Smart PoE Power Supply, automatically identification, never destroy the front equipment Full power protection POE Output LED Indicators: 7 x POE ( Blue), 7 x Data transfer ( Green ), 1 x Uplink ( Green ), 1 x Power ( Red ) Supported PoE devices: IP cameras, WLAN Access Point, IP Phones.. etc. Full Metal case Stackable: No size: 140x77x27mm Working condition: Temperature: 0-40 Degree C, Humidity: 10-90% RH package content: 1 x se-ns-poe-108 switch 1 x 48V 2A AC/DC adapter 1 x Power cord
SEDNA - PCI Express 2 Port USB 3.0 Adapter ( NEC 720200 chipset )
Features and specifications :
Fully compliant with PCI Express Base Specification Revision 2.0
Single-lane (x1) PCI Express Throughput Rates Up to 4.8Gbps
Compliant with Universal Serial Bus 3.0 Specification Revision 1.0
Supports Simultaneous Operation of Multiple USB 3.0, 2.0, 1.1 Devices
Supports Low-speed, Full-speed, High-speed, and Super-speed
Transfer Rate: 5Gbps 480Mbps, 12Mbps
Fully compatible with USB2.0 , USB 1.1
NEC uPD720200 Chipset
Supports Half Downstream Ports for All Speeds
Built-in 4-pin Power Connector
Package contents :
1 x PCIE USB 3.0 adapter
1 x Driver CD
Sedna - PCIE 7 Port USB 3.0 Adapter Card ( 7 External Ports ) with SATA Power Connector , ( NEC Host controller )
Features and specifications: NEC host controller Newest Solution, Supports USAP (USB Attached SCSI Protocol) of Windows 8 Maximum speed is about 400MBps + No Driver needed for Windows 8 and Windows 10 (Do not install driver for Windows 8) PCIE X1, 2.0 standard, NEC Host chipset 7 external USB 3.0 ports Each port provides 5VDC 1A via USB 3.0 connector Connect to PC power supply with SATA Power Connector Transfer Rate: 5Gbps, 480Mbps, 12Mbps Fully compatible with USB 3.0, USB 2.0, USB 1.1 and USAP Supports Windows XP / 2003 / Vista / 7 / 8 / 8.1 and Win 10 Package Contents: 1 x PCIE USB 3.0 adapter 1 x Driver CD
SEDNA - PCI-Express IEEE 1394b FireWire 3 Port Controller Card ( 2 External + 1 Internal ) with Low Profile Bracket
Introduction
This PCI-Express IEEE 1394b FireWire Controller Card is designed base on the advance technology of IEEE 1394b standard with transfer rate up to 800Mbps, it is also compliant with IEEE 1394-1995 and IEEE standard 1394a-2000. Having the speed of the transfer rate up to 2.5Gbps per Lane of the latest PCI-Express technology, the bottleneck of the speed of the PCI interface can be eliminated. With the capability of backward compatible to 400/200/100M bps, it is an ideal platform for connecting the exiting 1394a or 1394b mass storage devices with its ultimate high speed, it is also perfect for video capturing and audio data transferring. Furthermore, the controller card allows 2 or more computers connected together via the firewire ports to form a simple local area network.
With Low profile bracket to fit small form factory HTPC ..etc.
Features & Specification
TI XIO2213 Chip set
1-Lane (x1) PCI-Express with transfer rate 2.5Gb/s Full Duplex channel
Compliant with PCI-Express Revision 1.0a
Support provisions of IEEE Standard P1394b-2002
Compliant with 1394 Open Host Controller Interface (OHCI) specification Revision 1.1 and 1.2 draft
Support 800 / 400 / 200 / 100Mbps transfer rate
Fully Plug & Play and Hot Plug supported
Fully backward compatible to 1394a specification
Compliant with IEEE 1394a-2000 and 1394-1995 standard for a High-Performance Serial Bus
Fully interoperable with FirewireTM , iLINKTM and SB1394TM implementation of IEEE 1394 standard
Equipped with Bilingual IEEE Standard 1394b-2002 ports for 800Mbps data transferring
Built in driver support from Windows 7 / Vista / XP / 2000 / Server 2003-2008 32/64-bit, Mac operating system
Low profile bracket to fit HTPC ..etc.
Package Content
PCI-Express IEEE 1394b FireWire Controller Card x 1
Standard height metal bracket included
SEDNA - PCIE 2 Port USB 3.0 + 2 Port SATA 6G Combo Adpater with Low Profile Bracket
One single Adapter provide 2 x USB 3.0 Port and 2 x SATA III (6G ) Port to your desktop PC With Low profile bracket to fit slim HTPC or case Features and specifications: USB 3.0: Support Windows 8 UASP Fully compliant with PCI Express Base Specification Revision 2.0 Single-lane (x1) PCI Express Throughput Rates Up to 4.8G bps Compliant with Universal Serial Bus 3.0 Specification Revision 1.0 Supports Simultaneous Operation of Multiple USB 3.0, 2.0, 1.1 Devices Supports Low-speed, Full-speed, High-speed, and Super-speed Transfer Rate: 5Gbps 480Mbps, 12Mbps Fully compatible with USB 2.0, USB 1.1 ASM1042 Chipset SATA 6G: 1-Lane (x1) PCI-Express with transfer rate 5Gb/s Full Duplex channel 2 x Internal SATA Ports Compliant with Serial ATA 3.0 Specification the Data transfer rate up to 6.0G b/s Backward compatible with SATA 1.0 /SATA 2.0 specification Driver supported Windows98SE /ME/ 2000/XP/Server 2003/Vista/WIN7/ Win 8, Linux and Mac OS Chipset: Asmedia ASM1061 Package contents: 1 x PCIE USB 3.0 SATA 6G combo adapter 1 x Driver CD 1 x Low profile Bracket
SEDNA PCI Express USB 3.0 4 Port Adapter (2E2I)
SEDNA PCI Express USB 3.0 4 Port Adapter (2E2I) Specifications: • 2 x external and 2 x internal USB 3.0 port • Each port provides DC 5V 1A via USB 3.0 connector • VIA VL 800 / 801 chip set • Complies with PCI Express Base Specification Revision 2.0 • Complies with Universal Serial Bus 3.0 specification Revision 1.0 • Backward compatible to USB 2.0 and PCI-Express 1.0 • Connect to PC power supply to provide enough current for each port • Transfer Rate: 5Gbps 480Mbps, 12Mbps • Fully compatible with USB 2.0, USB 1.1 • Supports Windows 2000/XP/2003/Vista/7/8 • Fits perfectly with our 2 Port USB 3.0 front panel ( SE-FP-USB3-02 ) ( not included ) Package contents: • 1 x PCIE USB 3.0 adapter • 1 x Driver CD
SEDNA - PCI USB 2.0 4+1 shared port controller card ( NEC chip set )
Specifications: Data Transfer Rate: Hi-Speed up to 480Mbps Chipset: NEC External Ports: 4x USB 2.0 Internal Ports: 1x USB 2.0 ( shared ) Host Interface: PCI Supported OS: Windows XP/Vista/7/8/ 8.1, Linux, Mac OS Backwards compatible with USB 1.1 Full-Speed and USB 1.0 Low-Speed Supports device hot swap and wake-up Over current protection Package Includes 1 x 5-Port USB 2.0 PCI Card
sedna - power line phase coupler for home plug adapters
Feature: A Passive Coupler is a device which has been designed and manufactured for the purpose of transferring PLC signals from one phase to another. Specification: Transfer PCL signal across different phase in a 3 phase power system. Home Plugs connected in different phase can now communicate. Fit for DIN Rail standard. Easy Installation. Internal fuse for protection. Broadband of coupling frequency. Low attenuation.
SEDNA - PCI 10/100/1000 Dual Port Server Adapter 2 x RJ45 (Intel 82546 chipset)
Supports 64- or 32-bit PCI-X 1.0 or PCI 2.2 buses Support for most NOSs Intel SingleDriver technology Intel 82546 Gigabit Controller Expanded Advanced Server Features Features and Specifications: Supports 64- or 32-bit PCI-X 1.0 or PCI 2.2 buses Support for most NOSs Intel SingleDriver technology Backward Compatibility with previous generations of Intel PRO/1000 Network Adapters Remote Management Support (WfM, RIS, SNMP/DMI) Intel 82546 Gigabit Controller Full-height and low-profile, screw-on brackets included with each adapter Interrupt Moderation Advanced Cable Diagnostics Large Send Off-load/TCP Segmentation Off-load Expanded Advanced Server Features Support Win XP, Win Server 2003, Win Vista, Win 7, Win 8, Win server 2008 Package Content: 1 x PCI Giga LAN Card 1 x Driver CD 1 x 1 U metal bracket
SEDNA - PCIe X1 Dual 10/100/1000 Gbps Ethernet Server Adapter ( Intel 82575EB Chipset), with low profile bracket
Specification and Features: Ports: RJ45 * 2 Bus Type: PCI-E X1 Transmission Rate: 10/100/1000Mbps Chipset: for Intel 82575EB Boot Rom: Support BOOT ROM Ultra deep, packet buffer per channel lowers CPU utilization. Hardware acceleration that can offload tasks from the host processor. The Controllers can offload TCP/UDP/IP checksum calculations and TCP segmentation. 802. x flow control: Statistics for SNMP MIB II, Ethernet like MIB, and Ethernet MIB ( 802.3 z, Clause 30) Network standards: IEEE 802.1 p, IEEE 802.1Q, IEEE 802.2, IEEE 802.3 ac, IEEE 802.3 az, IEEE 802.3 x, IEEE 802.3 z, IEEE 802.3 ad LEDs indicators: 4 x Led for link/Activity/Speed status Management Features: WoL, PXE remote boot, ISCSI boot, VLAN filtering, ESXI, ROS. Link Aggregation and Load Balancing Switch dependent: 802.3 ad (LACP), Generic Trunking ( GEC / FEC) Switch and NIC Independent Failover Priority queuing – 802.1 p layer 2 priority encoding Virtual LANs – 802.1 q VLAN tagging Jumbo Frame ( 9.5KB ) Support system: Microsoft Windows* (Win Xp to Windows 10, 32 & 64 bit), SCO Unix Ware* 7. x, Open Unix* 8.0, Novell ODI*, Novell Netware*, SUSE Linux Enterprise Server* 9.0, Red Hat Enterprise Linux* 4.0, Linux*, Free BSD*, Sun Solaris*, VMWare ESX* Package Content: 1 x 2 Port PCIe Gigabit Ethernet Network Card 1 x Low Profile Bracket 1 x Driver CD
SEDNA - PCIE USB 3.0 3 Port Adapter Card with 10/100/1000 Mbps RJ45 Ethernet Port
Suports USAP ( USB Attached SCSI Protocol ) of Windows 8 Add extra Gigabit Ethernet network connectivity to your PC No Driver needed for Windows 8 3 x external USB 3.0 port 1 x RJ45 Gigabit LAN Port Specifications: USB 3.0 Newest Solution, Suports USAP (USB Attached SCSI Protocol) of Windows 8 Most probably the fastest USB 3.0 3 Port Adapter Card Maximum speed is about 385MB/s (see testing result photo) Add Gigabit Ethernet network connectivity to your PC No Driver needed for Windows 8 (Do not install driver for Windows 8) PCIE X1, 2.0 standard, VLI chipset 3 x external USB 3.0 port Each port provides DC 5V 1A via USB 3.0 connector Connect to PC power supply with 4 Pin Molex Power Connector Transfer Rate: 5Gbps, 480Mbps, 12Mbps Fully compatible with usb 3.0, USB 2.0, USB 1.1 and USAP Supports Windows XP / 2003 / Vista / 7 / 8 / 8.1 Giga LAN: Support for features such as Jumbo Frames, VLAN tagging and Wake on LAN (WOL) Transfer speed up to 1000Mbps Very low power consumption, compliant with IEEE 802.3 az Energy Efficient Ethernet Support Windows 8 AOAC and Intel LPM/LTM Supports CDC-ECM Chipset: RTL 8153 Microsoft NDIS5, NDIS6 Checksum Offload (IPv4, IPv6, TCP, UDP) and Segmentation Task-offload (Large send v1 and Large send v2) support Supports jumbo frame to 9K bytes Full Duplex flow control (IEEE 802.3 x) Fully compliant with IEEE 802.3 and IEEE 802.3 u Package contents: 1 x PCIE USB 3.0 Giga LAN adapter 1 x Driver CD
SEDNA - PCI 10/100/1000Mbps Gigabit Network Adapter - Giga LAN Card with Low Profile Bracket
General Features The SE-PCI-LAN-GIGA Network Interface Card is a cost-effective 1000/100/10Mbps high speed Gigabit Ethernet Card. With Auto-Negotiation capability, the NIC automatically supports data transmission bandwidth from 10Mbps to 2000Mbps. This function smoothly and automatically switches drivers between 10Mbps, 100Mbps and 1000Mbps. The Network Interface Card is your best choose to improve network performance with the highest performance/price ratio. Specifications: With Low Profile bracket for mounting to small HPTC or server case Bus: PCI V 2.2, 32-bit, 33/66MHz IEEE 802.3, IEEE 802.3 u, and IEEE 802.3 ab compliant. Support for IEEE 802.3 x Full-Duplex flow control. Support IEEE 802.1Q Virtual LAN (VLAN) Tag Complaint to PC97, PC98, PC99 and PC2001 standards Auto-Negotiation support for Auto-Detect 10/100/1000Mbps data rate and Full/Half-Duplex operation mode Support ACPI and PCI power management Automatic crossover support for crossover or regular cable Support Boot ROM function Support Wake on LAN function One RJ-45 Port Supports Drivers ODI drivers Novell NetWare 4. x, 5. x NDIS 4.0 drivers Windows NT 4.0 NDIS 5.0 drivers Windows 98/98SE, Windows ME, Windows 2000, Windows XP, Win Vista, win 7, Win 8 UNIX Drivers Linux Kernel 2.2 x, Linux Kernel 2.4 x and up Package contents: 1 x PCI-LAN-1G adapter 1 x Driver CD 1 x Low Profile Bracket
SEDNA - USB 3.0 to HDMI Display Adapter - 1080P
Specification and Features: Connect HDMI monitors / TV to Windows-based laptops or desktops FL2000 (Fresco Logic) chipset Highest performance USB graphics solution available Support solution up to 1920x1080 Multiple Monitors ( One adapter for one monitor ) USB 3.0 to HDMI Multiple Monitors up to 1920x1080 USB 2.0 to VGA Multiple Monitors up to 800*600 Windows 7, Windows 8, Vista 32/64 drivers via Windows Update or driver install. Compatible with all Macs/MacBooks Mac drivers available for OS X 10.8. 3. Plug and Play USB bus powered, no external power required Not supported for Linux and Win XP Product size: 60mm x 37mm x 15mm Connectors: USB 3.0 Micro B, Standard HDMI A type Package Content: 1 x USB 3.0 HDMI adapter 1 x USB 3.0 Cable 1 x Driver / User Manaul CD
SEDNA - SE-MP-CF-IDE-01 Compact Flash to IDE PCI Mounting Bracket Adapter
This adapter connects a compact flash memory card to a 3.5 ” IDE host interface. Aiming at educational sectors, IT development, and the embedded technology enthusiast to enable the use of a compact flash card as an IDE hard drive. Features: Bootable IDE to CF Compact Flash Card 40 Pin Adapter With this adapter, a x86 compatible system can be turned in to an embedded system Ideal for applications, such as Linux-based set-top boxes (routers, firewalls), diskless network clients, industrial computers, and any other device requiring rugged solid-state storage. Board size: 120mm x 20mm x 55mm (H, W, L). On-board LED indicators for power-on and compact flash access. Voltage selection for + 3.3V or +5V compact flash. Master or Slave mode selection. Power input: +5V, FDD power connector. Fully compatible with Compact Flash Type I, Type II, and Micro-drive. 40-way ( 2.54 mm) standard IDE connector. This adapter does NOT support hot insertion of CF cards. Support Windows 98SE/ME/2000/XP/Vista/Win 7, Linux Operating System Package Content: 1 x SE-MP-CF-IDE-01 Adapter
SEDNA PCI Express to PCI Adapter Card
SEDNA PCI Express to PCI Adapter Card This PCIe to PCI Adapter Card lets you use low profile PCI expansion cards in a server or desktop motherboard PCI Express slot. Compliant with PCI Express Specification 1.0 a and PCI Specification 2.2, the adapter card connects through a PCIe 1x slot to provide a low profile PCI slot in its place. A spare full size bracket for PCI Express card is also included for use in larger desktop or server PCI Express slots. A versatile solution, the adapter card converts PCIe to PCI a built-on LP4 power connector links the card to the computer power supply, allowing you to install universal voltage PCI cards ( 3.3V /5V). The adapter card offers an economical solution that lets you extend the usability of older or extra PCI Bus cards in newer PCIe capable systems. Specifications: • Compliant to PCIE 1.0 standard • 1 x 32bit 33M PCI slot • Compliant to PCI 2.3 standard • Support 3.3V /1A 3.3V aux/100mA 5V/5A and 12V/500m • 4 Pin ATA Power connector ( must be connected) • support: Windows2000/NT/2003/XP/Vista/7, Linux Package contents: • 1 x PCIE adapter
SEDNA - Android Network Media Player
SE-MPN-200S
Network Media Player
Features :
Share Media files
Media streaming
Easy Navigation
Get Instant entertainment
Built-in Application :
Wireless video / Video / Photo streaming with WiFi DLNA technology
Video / Audio / Photo playback with external USB storage via built-in USB 2.0 port
Internet applications : Web browser, email, Youtube, Picasa
Connectivity :
USB 2.0port for portable storage device connection
Ethernet ( RJ45) 100 Base T port for network connection
Optical ( S/PDIF ) audio output for lossless audio output to external optical audio decoder unit
HDMI output connection
WiFi connection with 802.11n - 150Mbps
TV Output :
TV Output with HDMI connection
Resolution support ; NTSC 480i/480p,PAL 576i/576p,720p, 1080i,1080p
HDMI Audio or S/PDIF Optical Digital Audio
Operating System :
Android 2.2
Photo file format support :
JPEG/BMP/PNG
Package Content :
1 x Network Media Player
1 x 5V 2A AC/DC adapter
Infra Red remote controller
Quick manual
SEDNA - PCI 10/100/1000Mbs Gigabit LAN adapter (Intel 82545EM chipset)
Features and Specifications: Inel 82545E chipset Comes with 1 standard bracket and 1 low profile bracket PCI revision 2.2, 32/64 bit, 33/66 MHz High-performance, auto-negotiating 10/100/1000 connection Full duplex operation at 10/100/1000 Mb/s Automatic Crossover Detection and Correction Supported A standard IEEE 802.3 Ethernet interface for 1000Base-T, 100Base-TX, and 10Base-T applications ( 802.3, 802.3 u, 802.3 ab). IEEE 802.3 x compliant flow control support with software controllable pause times and threshold values IEEE 802.3 ab Auto-Negotiation IEEE 802.1Q VLAN support with VLAN tag insertion and stripping and packet filtering for up to 4096 VLAN tags Jumbo frame support up to 16KB Compliance with PCI Power Management v 1.1 /ACPI v 2.0 Wake on LAN (WoL) support Automatic link speed switching from 1000 Mb/s down to 10 or 100 Mb/s in standby Connectors: 1 x RJ-45 Dimensions: 160 x 20x 120mm Package Content: 1 x PCI LAN card 1 x Driver CD 1 x Low profile bracket
SEDNA- PCIE 4X 4 Port Giga LAN Adapter (Intel I350AM4 chip set) with low profile bracket (Support VMware ESXi 5.5) (100414109901-FBA)
Main Features: Intel GbE LAN Powerville I350-AM4 chip Energy-efficient design Gigabit performance Power Management 10/100/1000 Mbps Virtualization support via VMDq and SR-IOV Multi-port cards provide the platform with the port density required for virtualized environments Specifications: Chipset: Intel I350-AM4 Connector type: RJ45 Number of ports: 4 Data transfer rate (s): 10/100/1000Mbps Auto Negotiation Bus interface: PCIe Gen 2.1 x4 LEDs: Link/Activity, Speed Network protocol and standards compatibility: IEEE 802.1 as, IEEE 802.1 q, IEEE 802.3 ab IEEE 802.3 ad, IEEE 802.3 az, IEEE 802.3 i IEEE 802.3 u, IEEE 802.3 x, IEEE 1588 HW Virtualization: PCI-SIG SR-IOV specification, up to 8 Virtual Functions per Port (32 VF) WoL: Yes Virtualization: VMware NetQueue and Microsoft VMQ (Eight transmit (Tx) and receive (Rx) queue pairs per port) On-chip VM-VM traffic enables PCIe speed switching between VM Teaming: by OS driver iSCSI support: Yes Additional Features: Jumbo Frames (up to 9.5 k) Offloading: TCP/UDP, IPv4 checksum offloads (Rx/ Tx/Large-send); Extended Tx descriptors for more offload capabilities IPv6 support for IP/TCP and IP/UDP receive checksum offload Tx TCP segmentation offload (IPv4, IPv6) Transmit Segmentation Offloading (TSO) Receive Side Scaling (RSS) for Windows environment Package Content: 1 x PCIe 4 Port Ethernet Adapter 1 x Low profile bracket 1 x Driver CD
SEDNA - PCIe 4X Dual 10/100/1000 Gbps Ethernet Server Adapter (Intel I350-T2 Chipset), with low profile bracket
Designed with performance enhancing features and new power management technologies
Key Features :
* Innovative power management features including Energy Efficient Ethernet (EEE) and DMA Coalescing for increased efficiency and reduced power consumption
* Flexible I/O virtualization for port partitioning and quality of service (QoS) of up to 32 virtual ports
* Scalable iSCSI performance delivering cost-effective SAN connectivity
* PCI Express* Gen 2.1 4 X Interface
Specifications :
Cable Medium : Copper
Cabling Type : Cat 5 up to 100m
Bracket Height : Low Profile and Full Height
TDP : 4.4 W
Supported Operating Systems : Windows Server 2012 R2, Windows Server 2012, Windows 8/8.1,Windows Server 2008 R2, Windows 7,
Windows Server 2008, Windows Vista, Windows Server 2003 R2, Windows Server 2003, Windows XP Professional, Linux Stable Kernel version 3.x, 2.6,x, Red Hat Enterprise Linux 5, 6, SUSE Linux Enterprise Server 10, 11, FreeBSD 9, VMware ESX/ESXi*
# of Ports : Dual
System Interface Type : PCIe v2.1 (5.0GT/s), X4 Lane
Intel® Virtualization Technology for Connectivity (VT-c) : Yes
Controller : Intel I350
Intel® Ethernet Power Management : Yes
Intelligent Offloads : Yes
Storage Over Ethernet : iSCSI, NFS
On-chip QoS and Traffic Management : Yes
Flexible Port Partitioning : Yes
Virtual Machine Device Queues (VMDq) : Yes
Package Content :
1 x i350T2 PCIE Ethernet Adapter
1 x Driver CD
1 x Low profile bracket
SEDNA - PCI 10/100/1000Mbs Gigabit LAN adapter ( Intel 82545EM chipset )
Features and Specifications: Inel 82545E chipset Comes with 1 standard bracket and 1 low profile bracket PCI revision 2.2, 32/64 bit, 33/66 MHz High-performance, auto-negotiating 10/100/1000 connection Full duplex operation at 10/100/1000 Mb/s Automatic Crossover Detection and Correction Supported A standard IEEE 802.3 Ethernet interface for 1000Base-T, 100Base-TX, and 10Base-T applications ( 802.3, 802.3 u, 802.3 ab). IEEE 802.3 x compliant flow control support with software controllable pause times and threshold values IEEE 802.3 ab Auto-Negotiation IEEE 802.1Q VLAN support with VLAN tag insertion and stripping and packet filtering for up to 4096 VLAN tags Jumbo frame support up to 16KB Compliance with PCI Power Management v 1.1 /ACPI v 2.0 Wake on LAN (WoL) support Automatic link speed switching from 1000 Mb/s down to 10 or 100 Mb/s in standby Connectors: 1 x RJ-45 Dimensions: 160 x 20x 120mm Package Content: 1 x PCI LAN card 1 x Driver CD 1 x Low profile bracket
