SMSL T2 2X6J9 Super Low Ground Noise Vacuum Tube Headphone Amplifier, Integrated Tube Amplifier, Audio, HIFI, Stereo, Output Protection for Headphone
FEATURES: Our T2 amp utilizes two 6J9 J-grade tubes and two NJM5532D as core parts of the circuit. The 6J9 tubes amplify the voltage which increases the input signal. The current formed by NJM5532D (Made by JRC Japan Company) amplifies the electric circuit to drive the mini headphone amplifier. These two features provide an awesome combination of high quality sound and a very powerful drive current for an optimum listening experience! Our T2 amp adopts a Single Chip Microcomputer and Relay to control the muted sound when the device is OFF or first turned ON. It allows the device to warm up before transmitting sound, protecting the unit and your speakers and preventing that annoying "popping" sound that is heard with many other, less quality systems. Please Note: The blue LED lights will flash for about 35 seconds when the unit is first powered on. This indicates that the unit is warming up. The blue lights will be lit solid when the amplifier is ready to be used! SPECIFICATIONS: Input Interface: 3.5 mm Stereo Jack Output Power: 32 O: 70 mW 64 O: 44 mW 150 O: 23 mW 300 O: 13 mW THD+N: 0.0015 % SNR: 80dB Frequency Response: 20Hz-20kHz Residual Noise: 0.02 mV Consumption Power: 5.6W PACKAGE INCLUDES: 1 X T2 headphone amp 1 X T2 user manual 1 X Adapter UPC: 607994576834 SKU: ADIB06XYJB7S8
SMSL M500 MQA Decoder Headphone AMP ES9038PRO ES9311 XMOS XU-21632bit 768kHz DSD512 Hi-Res Audio DAC Headphone Amplifier
Features:
Supports MQA decoding;
The top performance D/A chip ES9038PRO from ESS Technology;
The high-performance power supply chip ES9311, the noise of ES9311 is as low as
1uVrms, to push ES9038PRO to the limit;
XMOS XU-216, true 32bit audio processing, supports DoP and Native DSD, and reaches
32bit/768kHz and DSD512;
Ultra-low phase noise and optimized clock processing circuit are used to achieve
ultra-low clock jitter;
All inputs support DSD streaming, including coaxial and optical (DoP64);
Independent headphone volume design, does not interfere with the preamp volume;
Special design of discrete components high current headphones amplifier for higher
damping factor;
Use tempered glass display panel for higher light transmission and longer service life;
Built-in shielded, low noise power supply processing, while improving power efficiency,
lower power consumption;
High quality gold-plated input and output jacks;
3 high-end dual op-amps OPA1612 and a lot of audio grade components are used;
2.19 inch LG TFT LCD display;
JAS Hi-Res certification;
Equipped with remote control and full-function remote control.
Specifications:
Input: USB / Opticalx2 / Coaxial
Output :RCA Headphone Amplifier/ RCA /XLR
THD+N :0.00015%
Dynamic range : XLR 125dB
RCA 120dB
SNR :120dB
USB transmission :Asynchronization
USB compatibility:Windows 7 / 8 / 8.1 / 10, Mac OSX10.6 or Later?Linux
Bit depth :USB 1bit, 16 ~ 32bit
Optical / Coaxial 1bit, 16 ~ 32bit
Sampling rate :USB PCM 44.1 ~ 768kHz
DSD 2.8224 ~ 22.5792MHz
Optical / Coaxial PCM 44.1 ~ 192kHz
DSD DSD64(DoP)
Headphone amplifier output power:570mW(32O)
290mW(64O)
125mW(150O)
65mW(300O)
Power Consumption :5W
Standby power :
SMSL SP200 Balanced Headphone Amplifier THX AAA 888 Technology XLR HiFi Music Stereo Home Audio Amplifier AC Power Supply
The SMSL SP200 THX Headphone Amp is the newest product in the SMSL lineup with the top of the line audiophile high power grade THX AAA-888 technology. This technology allows for the highest fidelity with extreme output power and ultra-low crosstalk. This amp is versatile and can be used to drive a variety of headsets including those that have high impedance, require high current, or need high sensitivity, Not compatible with Windows 10, please read the product description carefully before purchasing.
The SP200 comes with an included AC power supply and is equipped with XLR and RCA inputs. The front panel has XLR and quarter-inch jack outputs, options for switching between different inputs and choosing high or low gain. A detailed review for the SP200 and its performance is provided by Amir on Audio Science Review.
The SP200 has a balanced stereo headphone output, a balanced stereo line input comes with high precision resistors for temperature stability, and a high-efficiency ultra-low noise power supply.
Audio Science Review Highlights:
"THX seems to have revolutionized the mid to high-priced headphone amplifier market. It provides a winning combination of vanishingly low distortion and tons of power." - Amir on ASR
"Great to see a new price point also in THX amps. You can add a $100 DAC to SP200 and still be cheaper than the other THX offerings. Needless to say, it is my absolute pleasure to recommend SMSL SP200. It makes THX headphone amplifiers more affordable and gets rid of clutter on your desk to boot" - Amir on ASR
Specs:
Inputs: Balanced x 1, Unbalanced x 1
Outputs: Balanced x 1, Unbalanced x 1
Output Power:
6W x 2 (16ohm)
3W x 2 (32ohm)
440mW x 2 (300ohm)
220mW x 2 (600ohm)
SNR: 130dB, A-Weighted
Output Noise: 2.8uV, A-Weighted
THD+N: -122dB, 0.00007% (1kHz, 32ohm)
THD+N: -117dB, 0.00013% (20 - 20kHz, 32ohm, -3dB)
THD: -125dB, 0.00006% (1kHz, 16ohm, -3dB)
Output Impedance: Near 0ohm
Frequency Response: 0.1Hz - 500kHz(-3dB)
Gain: Low(+6dB), High(+18dB)
Power Supply Voltage/Frequency: AC100-240V, 50-60 Hz
Power Consumption (EN60065): 24W
Power Consumption in Standby Mode: < 0.1W
Features:
THX AAA-888 Technology
Ultra-Compact design - great for desktop
Toggle switch for operation, input selection, and gain control
Balanced stereo headphone output
Balanced stereo line input
High precision resistors for temperature stability
Pop-less design with high quality relays
Selected high precision low-distortion volume potentiometer
Full protection with DC, over-voltage, over-current, and short-circuit
Thermal protection on headphone amplifier
High-efficiency ultra-low noise power supply
SMSL M9 32bit/768kHz DSD512 AK4490x2 XMOS HiFi Audio DAC Digital to Analog Converter, Balanced Headphone Amplifier with Optical Coaxial USB Input
Input: Optical, Coaxial, USB Output: RCA jack,balanced 2.5mm and unbalanced 6.35mm headphone jack Power Adapter: 5V Compatibility: Windows 7/8/8.1/10; Above Mac OSX10.6 USB Program: XMOS xCORE200 USB Bit depth: 16-32bit Dynamic Range(24bit):115dB SNR (DAC): 110dB SNR (Heaphone amplifier): 105dB USB PCM Sampling Rate: 44.1-768kHz Optical/Coaxial sampling rate:44.1-192kHz DAC IC: AK4490EQx2
SMSL SH-9 AAA Technology RCA/XLR Input 6.35MM Balanced Headphone Amplifier
Features
*THXAAA-888 Headphone Amplifier with THX AAA Technology
*6 Watts into 16 Ohm,3 Watts into 32 Ohm Headphones with lowest THD+N
*0.1Hz to 500kHz(-3dB) Frequency Response
*SNR>137dB
*THD
SMSL M200 DAC AK4497EQ Bluetooth 5.0 32Bit/768KHz DSD512 Decoder with Remote Control
Features:
AK4497EQ High-end dacoder chip:
DAC uses AKM's high-end decoding chip AK4497,which has a high SNR and low distortion, and supports DSD to achieve better sound out put and provide rich sound details.
Enjoy wireless freedom to listen to music:
The latest Qualcomm Bluetooth solutiion supports UAT/LDAC/aptX-HD/AAC/SBC and other encoding formats and up to 24bit/192kHz audio.
PCM sampling rate up to 32bit/768kHz DSD supports to DSD512.Spports native DSD drivers.
DSD Volume Bypass:
Start DSD Volume Bypass ,DSD is the original music without any treatment.
6 digital filter modes and 3 sound color selection.
Parameter:
Inputs:USB/Optical/Coaxial/Bluetooth
Output Level:RCA 2Vrms?XLR 4.1Vrms
THD+N(UN-WTD):0.00015%(-116dB)
Dynamic range(A-WTD):RCA123dB?XLR125dB
SNR(A-WTD):125dB
Bluetooth:
UAT:24bit/192kHz_1200kbps(-1200kbps/900kbps/600kbps)
LDAC:24bit/96kHz_990kbps(-990kbps/660kbps/330kbps)
aptX-HD:24bit/48kHz_576kbps
aptX:16bit/44.1kHz_352kbps
SBC:16bit/44.1kHz_328kbps
AAC:16bit/44.1kHz_320kbps
USB transmission:Asynchronous
USB compatibility:Windows7/8/8.1/10 ?Mac OSX10.6 or Later/Linux
Bit depth:
USB:1bit~32bit
Optical/Coaxial:16bit~24bit
Sampling rate:
USB:44.1~768kHz?DSD64,DSD128,DSD256,DSD512
Optical/coaxial:32~192kHz
Powe Consumption:3.5W
Standby power:
SMSL SA-98E 2 160W TDA7498E amplifier stereo digital amplifier + power adapter,TOP HIFI (black)
Specifications: Mode: SA-98E Material: All aluminum Surface craftsmanship: sand-blast, wiredrawing, oxidation and laser engraving, never fade like paint spraying Power: 160W/4¦¸ DR: 98dB THD: 10% Chip efficiency: 85% Signal input: RCA golden-plated stereo input Power supply: 100-240ACV Circuit material: 1.6 mm thick all glass fiber, 20Z copper, advanced IMG processing Dimension: Approx. 168 * 98 * 36mm/ 6.6 * 3.8 * 1.4" Color: Black Net weight: Approx. 1390g 100% Brand new Suitable for: Amplify the sound during your listening Package Includes: 1 x Digital Amplifier 1 x 36V/ 5.7A Power Adapter UPC: 693595438527 SKU: ADIB00JESRNKO
SMSL SP400 Full Balanced THX AAA 888 6.5mm SE Out XLR RCA Headphone Amplifier
Features:
Audio part:
Input method: balanced x1, unbalanced x1
Output mode: balanced earphone X1, unbalanced earphone X1, pre-balanced output X1
Output Power:
Balanced headphones:
12Wx 2(16O)
6Wx2 (32O)
880mW x2 (300O)
440mW x2 (600O)
Unbalanced headphones:
6Wx2(16O)
3Wx2 (32O)
440mW x2 (300O)
220mW x2 (600O)
Signal to noise ratio: 133dB, A-Weighted
Residual noise: 1.9uV, A-Weighted
THD+N: -123dB, 0.00007% (1kHz, 32O)
THD+N: -117dB, 0.00013% (20-20kHz, 32O, -3dB)
THD: < -125dB, 0.00006%
Input impedance: 47kO
Output impedance: close to 0O
Frequency response: 0.1Hz-500kHz (-3dB)
Other:
Power supply voltage/power frequency: AC100-240V, 50-60 Hz
Energy consumption (EN60065):
SMSL DP5 ES9038Pro MQA DAC HiFi DSD256 IIS USB Bluetooth Streaming Playback Unbalanced Balanced Music Player
SMSL DP5 Feature
1. Clean up the recording
When the analog sound is converted to a digital signal,time blurring will occur, blurring transient signals over time. As a result, our ears cannot tell where a single sound comes from, the comparison between recorded music and “live performances” is unremarkable!. MQA can eliminate this distortion and create a true 3D sound field, which is different from any sound you have ever heard.
2. Encapsulate the sound
Once the blur in the recording is removed,MQA will use what we call a "musical origami" process,Cleverly makes this large resolution file easy to manage and can compatible with any service or playback device.
Parameter Description
Input mode: USBx2 / USB Audio / micro SD / Bluetooth / DLNA/SAMBA(NAS)
Output mode: Line / balanced / headphone / optical fiber / coaxial / AES / Bluetooth /USB / I²S
THD+N: 0.00015%
Dynamic range:130dB(A-Weighted)
SNR: 130dB(A-Weighted)
Headphone output power:
89mW(32O)
64mW(64O)
27mW(150O)
14mW(300O)
Unbalanced line output level: 2.1Vrms
Balanced line output level: 5.2Vrms
USB Audio:
DSD Top support DSD256
PCM Top support PCM384kHz
USB Audio System compatibility: windows 7/8/8.1/10;Mac OS X;Linux
DSD D2P: Up to DSD128
Package Including:
1 x SMSL DP5 machine
1 x Remote control
1 x USB cable
1 x Power cord
1 x User manual
S.M.S.L SU-9 MQA Full Decoder ES9038PRO DAC XMOS DSD512 PCM768kHz/32Bit Bluetooth 5.0 UAT APTX-HD USB Balanced Decoder
Features:
Support MQA full decoding:
Clean up the recording
When the analog sound is converted to a digital signal, time blurring will occur, blurring transient signals over time. As a result, our ears cannot tell where a single sound comes from, the comparison between recorded music and "live performances" is unremarkable! MQA can eliminate this distortion and create a true 3D sound field, which is different from any sound you have ever heard.
Encapsulate the sound
1.MQA Decoder
This will expand the MQA file once to provide better sound quality than CD quality. Products with MQA decoder have Bluesound, Pioneer, and Onkyo's player (with a digital output product). Such as shrimp and music streaming service providers and Roon other media players.
2.MQA Renderer
Use the product with MQA renderer to complete the final deployment. Renderer including USB DACS and some headphones and other portable products. For example, AudioQuest DragonFly can connect to the MQA Core signal and complete the expansion of the MQA file.
3.MQA Full Audio DAC
Products with MQA full decoder can fully expand the file to provide the best sound quality. Playing at this level, you will hear the original sound created by the artist in the recording studio, with precise files and specific DAC compensation and management.
Specification:
Input: USB/Optical/Coaxial/Bluetooth
Output: RCA/XLR
THD+N:0.00009%(-121dB)
Dynamic range:XLR 130dB
RCA 123dB
SNR:130dB
Output impedance: XLR 207O
RCA 142O
USB transmission: A synchronization
USB compatibility:Windows 7+,Mac OSX,Linux
Bit depth: USB 1bit,16-32bit
Optical/Coaxial 1bit,16-24bit
Sampling rate: USB PCM 44.1-768kHz
DSD 2.8224-22.5792MHZ
Optical/Coaxial PCM 44.1-192kHZ
DSD dsd64(DoP)
Bluetooth:
UAT:24bit/192kHz (1200kbps/900kbps/600kbps)
LDAC:24bit/96kHz (990kbps/660kbps/330kbps)
aptX-HD:24bit/48 kHz-576kbps
aptX:16bit/44.1 kHz-352kbps
SBC:16bit/44.1 kHz-328kbps
AAC:16bit/44.1 kHz-320kbps
Power Consumption:5W
Standby power:
smsl audio q5 pro digital amplifier black
Parameters: Input: Optical, Coaxial, Analog, Computer USB Output: 2-channel (stereo) subwoofer out1 Sampling rate: 44.1-192kHz (coaxial Optical)44.1-96kHz (computer USB)Bit wide: 16-24BitFrequency response: 20Hz-22kHzImpedance adaptation: 4-8 ohm Maximum output power: 50W / 4 Ohm 35W / 8 ohm Dynamic Range: 102dBSNR: 81dBPower consumption: 102W (maximum)Dimension137X103X33mm(Do not include bulge)Net Weight1.1KGPackage list:Q5 unit 1USB cable 1User manual 1Pwer adapter 1Remote control 1UPC NO:686560680755 SKU:ADIB014P5I93A
SMSL IDOL+ DAC/Sound Card/Headphone Amplifier OTG MICRO USB 192KHZ
Measuring 2.25 inches long and weighing just half an ounce, the SMSL IDOL + is one of the smallest DAC/amps around. But don’t be fooled by its slim profile—it has what it takes to power high-impedance headphones with ease, and sampling rate supports 192kHz. Inside, the IDOL + AMP chip uses MAX97220A. Suitable for most earphones. The exterior is aesthetically pleasing and simple, with a volume control and mute botton on the top panel, a 3.5 -millimeter headphone out on one end, and on the other, a Micro USB port for connecting to your laptop or mobile device. FEATURES: Selectable input source from computer, andriod phone or iphone by OTG connection, and also ipad. Featured with volume up/down and mute function Ultra-low power consumption. 4, No need driver, fast connection for usage. AMP chip uses MAX97220A. Suitable for most earphones. 6, USB programme uses VT1620A Weight only 11g, very convenient and portable. 8, Sampling rate support up to 192kHz SPECIFICATION: Model Number: Idol + Power InputL: 5v OTG: Support Color: Black Input: Micro USB USB Programme: VT1620A Output 3.5 mm 16bit Sampling Rate: 192kHz 24bit Sampling Rate: 96kHz Dynamic range: 97dB SNR: 85dB Product Weight: 11g Headphone AMP IC: MAX97220A Gross Weight: 56g THD+N: 0.025 % Product Size: 55*21*8mm UPC: 6970141851097 SKU: ADIB01M1HJVZY
Wireless Earbuds, Loncaster Bluetooth Headphones Stereo Earphone Cordless Sport Headsets,Bluetooth in-Ear Earphones with Built-in Mic for Smart Phones
1. Drive: 15mm 2. Impedance: 32 OHM 3. Bluetooth Version: Bluetooth V4. 1+EDR 4. Bluetooth Frequency:2. 4Hz 5. Power Grade:Class II 6. Output Power:30mW 7. Bluetooth Distance: 15 meters accessible 8. Frequency Response: 20-20000Hz 9. Operating Voltage Range: 3. 0V-4. 2V 10. Microphone Sensibility:-42dB 11. A2DP/AVRCP High Quality Stereo Audio Transmission and Remote Control Protocol 12. Intense Noisy Cancellation Circuit 13. Switch Between Chinese and English(when the phone is not connected to the Bluetooth, press the switch twice to hear the tone switch successfully) 14. Charge for approximately for an hour( Power Indication: red light, full charge; blue light, the red light disappear) 15. Product Size: Length 25mm*Width15mm*Height35mm 16. Product Weight: 6 g 17. Call Duration: About 2-3 Hours 18. Music Duration: About 2-3 Hours 19. Standby Time:About 96 Hours 20. Charging Time: 60 Minutes 21. Battery Capacity: 55MAH 22. Power: DC 5V(Round Hole Interface), USB Port, Cellphone Charger, Car Charger. 23. The Weight of Whole Set: 60g 24. Package Dimension: 9. 583. 5*13cm 25luding: Earphones+USB Cable+Manual+Package Box
MXQ Pro2 Android 6.0 TV Box, KINTUS MXQ Pro Am Logic S905X Quad-core 64-Bit UHD 4K H.264 Media Center Smart OTT TV Box
Hardware Specifications : CPU : Am logic S905 Quad-Core Cortex-A53@2. 0GHz GPU: Penta-Core Mali-450@600MHz+ FLASH: 8GB NAND FLASH SDRAM: 1GB DDR3 Power Supply: DC 5V/2A Power Indicator (LED) Power ON : blue; Standby : Red Main Features : OS: Android 5. 1 3D: Hardware 3D graphics acceleration Support Decoder format: HD MPEG1/2/4, H. 265, 4K-HD, HD AVC/VC-1, RM/RMVB, /DivX3/4/5/6 , RealVideo8/9/10 Support Media format: Avi/Rm/Rmvb/Ts/Vob/Mkv/Mov/ISO/wmv/asf///mpg/mpeg Support Music format: MP3/WMA/AAC/WAV/OGG/AC3/DDP/True HD/DTS/DTS/HD/FLAC/APE Support Photo format: HD JPEG/BMP/GIF/PNG/TIFF USB host: 4 High speed USB 2. 0, support U DISK and USB HDD Card reader: SD/SDHC/MMC cards HDD file system: FAT16/FAT32/NTFS Support Subtitle: SRT/SMI/SUB/SSA/IDX+USB High Definition video output: SD/HD max. 1920x1080 pixel OSD type of languages: English/French/German/Spanish/Italian/ etc. multilateral languages LAN Ethernet: 10/100M, standard RJ-45 Wireless: Built in Wi-Fi Mouse/ Keyboard : Support mouse and keyboard via USB; Support 2. 4GHz wireless mouse and keyboard via 2. 4GHz USB dongle HDMI: HDMI 1. 4b with CEC AV: Support 3G: Support SPDIF/IEC958: Coaxial Package list: 1x MXQ Pro TV box 1x Charger 1x HDMI Cable 1x Remote Controller 1x User Manual
