Tentacle Sync SYNC E Bracket #A06-B
This lightweight aluminum bracket for the Tentacle SYNC E exclusively manufactured by LanParte can be mounted to any camera rig or directly to a camera with the included 1/4" screw. The Tentacle can be slid in and will be fastened with a little clamp. Secured in that mount, the Tentacle Clamp for the angled Mini Jack can still be connected. If you want an even more convenient mount, you can use the additional Quick Release Bracket or Cold Shoe Mount.
Tentacle Sync SYNC E Bracket with Quick Release Mount #A06-QRM
This lightweight aluminum bracket for the Tentacle SYNC E exclusively manufactured by LanParte can be mounted to any camera rig or directly to a camera with the included 1/4" screw. The Tentacle can be slid in and will be fastened with a little clamp. Secured in that mount, the Tentacle Clamp for the angled Mini Jack can still be connected. If you want an even more convenient mount, you can use the additional Quick Release Bracket or Cold Shoe Mount.
Tentacle Sync SYNC E Bracket with Cold Shoe Mount #A06-CSM
This lightweight aluminum bracket for the Tentacle SYNC E exclusively manufactured by LanParte can be mounted to any camera rig or directly to a camera with the included 1/4" screw. The Tentacle can be slid in and will be fastened with a little clamp. Secured in that mount, the Tentacle Clamp for the angled Mini Jack can still be connected. If you want an even more convenient mount, you can use the additional Quick Release Bracket or Cold Shoe Mount.
Tentacle Sync Aluminum Bracket with 15mm Rod Support for SYNC E #A07
Lightweight Aluminum Bracket with rod support for the Tentacle SYNC E. The special feature here is the 15mm rod support. Simply slide it on and clamp it with the built-in screw. Additionally it can be mounted to any camera rig or directly to a camera with the included 1/4" screw. Idea and design of "The Mad Tentacle Clamp" by Marc-Andre. Exclusively produced by SmallRig.
Tentacle Sync 16" Red Adapter Cable #C01
Cable to feed timecode from your Tentacle to RED Cameras, excluding RED One. This cable is compatible with all RED Cameras that have a 4pin LEMO Sync Port.
Tentacle Sync Adapter Cable for Tentacle Timecode Generator to BNC (Straight)
Bidirectional cable to feed timecode from your Tentacle to any device that uses a BNC timecode in/out connector and vice versa. You need this cable if you want to connect Tentacle to devices that accept and send timecode over BNC like the Canon C300 / C500, Sony PDW 700 / EX3 / PMW 200, ARRI Amira.
Tentacle Sync Adapter Cable for XLR to Tentacle Timecode Generator #C05
Cable to feed timecode from a device that uses a 3-pin XLR output into Tentacle. You need this cable if you want to jam-sync Tentacle from external timecode sources which have a XLR output, like studio environments.
Tentacle Sync Adapter Cable for Tentacle Timecode Generator to XLR Connector
Cable to feed timecode from your Tentacle to any device that uses a standard XLR input connector. You need this cable if you want to connect Tentacle to devices that accept timecode over XLR like the Tascam HD-P2. This cable is also be the right choice for connecting Tentacle to cameras and audio-recorders with audio-XLR inputs but without build in timecode-capabilities. Here the timecode signal will be recorded as an audio signal on a soundtrack. These cameras include Canon C100, Sony EX1 / FS100 / FS700 / FS5 / FS7 (without XDCA-FS7) and others.
Tentacle Sync 12" 3.5mm BodyPack Y-Adapter Cable #C16
Custom-built Y-adapter-cable to connect Tentacle to cameras with minijack input and use a Sennheiser Evolution Bodypack Receiver. Audio Timecode on left channel and external microphone on the right channel.
Tentacle Sync Adapter Cable for Tentacle Timecode Generator to BNC (Right Angle)
Bidirectional cable to feed timecode from your Tentacle to any device that uses a BNC timecode in/out connector and vice versa. You need this cable if you want to connect Tentacle to devices that accept and send timecode over BNC like the Canon C300 / C500, Sony PDW 700 / EX3 / PMW 200, ARRI Amira.
Tentacle Sync Adapter Cable for LEMO 5-Pin to Tentacle Timecode Generator #C03
Cable to feed timecode from a device that uses a standard 5pin LEMO connector into Tentacle. You need this cable if you want to jam-sync Tentacle from devices like ARRI Alexa or Sound Devices 702T / 744T / 788T / 664 / 633 or others that using a LEMO 5pin connector.
Tentacle Sync Adapter Cable for Tentacle Timecode Generator to LEMO 5-Pin #C02
Cable to feed timecode from your Tentacle to any device that uses a standard LEMO 5-pin connector. You need this cable if you want to connect Tentacle to devices like ARRI Alexa, RED One or Sound Devices 702T / 744T / 788T / 664 / 633 or others that using a LEMO 5-pin connector.
Tentacle Sync 12" Tentacle Timecode Generator to ALEXA Mini Camera Cable #C13
Original 90 deg. LEMO adapter-cable to connect Tentacle to ALEXA MINI camera. LEMO Anglissimo connector pointing upwards (Direction to the red point).
