Buy Uni T Products online in United States

Sort by
UNI-T UT139C True RMS Digital Multimeters
Descriptions: Key Features UT139 Series digital multimeters are newly designed to offer users better performance and higher safety rating. Totally over-load protection and unique structural design make it new type of multimeter with high performance/ price ratio and a best choice for electricians used in electrical maintenance and repairing. 1?True RMS for the whole series; 2?Measure signals with varied frequency (VFC); 3?Measure large capacitance up to 100mF; 4?Optional AC/DC 60A current clamps in different models to measure current up to 60A(1mv=1A); 5?NCV designed for the whole series, a necessity for electricians; 6?AA 1.5V *2(5#) battery, easy for users to purchase and replace; 7?Soft rubber holster is easy to stand 2m drop; 8?Optional magnetic hanging strap offered to facilitate tests in special location; 9?Fast to replace fuse, just by opening battery cover; 10?Reliable with use of internal 2PCS fuses with high-breaking capacity; 11?Protection against 600V input/1 minute from misconnection; 12?Safety Rating: CAT III 600V. Applications An ideal tool for equipment testing, maintenance and repair widely needed in electronics, electric power, schools, metallurgy, communications, manufacturing, petroleum, national defense, chemical industry, etc. Features: Display Count: 6000 Auto Range: Manual Range: True RMS: Bandwidth (Hz): 45Hz ~1kHz V. F. C: Duty Cycle: 0.1 % ~ 99.9 % Diode: Around 3V NCV: Auto Power Off: Around 15 Minutes Continuity Buzzer: Low Battery Indication: 2.5V Data Hold: Relative Mode: MAX/MIN: LCD Backlight: Input Protection: 600Vrms Input Impedance for DCV: 1GO Max Specifications: Model: UT139C DC Voltage (V): 60mV/600mV/6V/60V/600V ( 0.5 %+2) AC Voltage (V): 60mV/600mV/6V/60V/600V ( 0.8 %+3) DC Current (A): 600µA/6000µA/60mA/600mA/6A/10A ( 0.7 %+2) AC Current (A): 600µA/6000µA/60mA/600mA/6A/10A (1%+3) Resistance (O): 600O/6kO/60kO/600kO/6MO/60MO ( 0.8 %+2) Capacitance (F): 9.999 nF/ 99.99 nF/ 999.9 nF/ 9.999 µF/ 99.99 µF/ 999.9 µF/ 9.999 mF/ 99.99 mF ( 4.0 %+5) Frequency (Hz): 10Hz-10MHz ( 0.1 %+4) Temperature (C): -40 C~1000C ( 1.0 %+3) Temperature (F): -40F~1832F ( 1.5 %+5) General Characteristics: Power: AA 1.5V * 2 (not included) LCD Size: 58mm * 36 mm Product Colour: Red and Grey Product Net Weight: 370g Product Size: 175mm * 81mm * 48.5 mm Package Size: 22 * 16 * 6cm / 8.7 * 6.3 * 2.4 in Package Weight: 566g / 1.2 lb Package list: 1 * UNI-T UT139C True RMS Digital Multimeters 2 * Test Leads 1 * Temperature Probe
Uni-T
UNI-T UT139C True RMS Digital Multimeters
UNI-T UT139C True RMS Digital Multimeters
Descriptions: Key Features UT139 Series digital multimeters are newly designed to offer users better performance and higher safety rating. Totally over-load protection and unique structural design make it new type of multimeter with high performance/ price ratio and a best choice for electricians used in electrical maintenance and repairing. 1?True RMS for the whole series; 2?Measure signals with varied frequency (VFC); 3?Measure large capacitance up to 100mF; 4?Optional AC/DC 60A current clamps in different models to measure current up to 60A(1mv=1A); 5?NCV designed for the whole series, a necessity for electricians; 6?AA 1.5V *2(5#) battery, easy for users to purchase and replace; 7?Soft rubber holster is easy to stand 2m drop; 8?Optional magnetic hanging strap offered to facilitate tests in special location; 9?Fast to replace fuse, just by opening battery cover; 10?Reliable with use of internal 2PCS fuses with high-breaking capacity; 11?Protection against 600V input/1 minute from misconnection; 12?Safety Rating: CAT III 600V. Applications An ideal tool for equipment testing, maintenance and repair widely needed in electronics, electric power, schools, metallurgy, communications, manufacturing, petroleum, national defense, chemical industry, etc. Features: Display Count: 6000 Auto Range: Manual Range: True RMS: Bandwidth (Hz): 45Hz ~1kHz V. F. C: Duty Cycle: 0.1 % ~ 99.9 % Diode: Around 3V NCV: Auto Power Off: Around 15 Minutes Continuity Buzzer: Low Battery Indication: 2.5V Data Hold: Relative Mode: MAX/MIN: LCD Backlight: Input Protection: 600Vrms Input Impedance for DCV: 1GO Max Specifications: Model: UT139C DC Voltage (V): 60mV/600mV/6V/60V/600V ( 0.5 %+2) AC Voltage (V): 60mV/600mV/6V/60V/600V ( 0.8 %+3) DC Current (A): 600µA/6000µA/60mA/600mA/6A/10A ( 0.7 %+2) AC Current (A): 600µA/6000µA/60mA/600mA/6A/10A (1%+3) Resistance (O): 600O/6kO/60kO/600kO/6MO/60MO ( 0.8 %+2) Capacitance (F): 9.999 nF/ 99.99 nF/ 999.9 nF/ 9.999 µF/ 99.99 µF/ 999.9 µF/ 9.999 mF/ 99.99 mF ( 4.0 %+5) Frequency (Hz): 10Hz-10MHz ( 0.1 %+4) Temperature (C): -40 C~1000C ( 1.0 %+3) Temperature (F): -40F~1832F ( 1.5 %+5) General Characteristics: Power: AA 1.5V * 2 (not included) LCD Size: 58mm * 36 mm Product Colour: Red and Grey Product Net Weight: 370g Product Size: 175mm * 81mm * 48.5 mm Package Size: 22 * 16 * 6cm / 8.7 * 6.3 * 2.4 in Package Weight: 566g / 1.2 lb Package list: 1 * UNI-T UT139C True RMS Digital Multimeters 2 * Test Leads 1 * Temperature Probe
Uni-T
UNI-T UT139C True RMS Digital Multimeters
UNI-T UT25A UT25A/B Automatic Circuit Breaker Finder Socket Tester with LED Indicator
Professional circuit breaker finder with stable performance and accurate test. Suitable for house, office, factory power network reconstruction, etc. Features: Find circuit breaker or circuit fuse quickly and accurately. Sensitivity can be adjusted through the ON/OFF switch. The operator can determine the status of circuit connection according to the 3 LEDs. NCV indicator light is only for UT25B. Support GFCI test on socket. The receiver is powered by a 9V battery (not included). The transmitter works on 110-125V. Specifications: Receiver: Type: UT25A / UT25B (optional) Operating Voltage: 90-120V Operating Frequency: 50-60Hz NCV Working Voltage: 80V (only for UT25B) Power Supply: 1 * 9V Type 1604/6F22 Battery (not included) Operating Temperature: 5C-40C Transmitter: Working Voltage: 110-125V Operating Frequency: 50-60Hz Fuse: 1A, 250V, Dia.: 4*11mm Receiver Size: 19 * 5 * 3cm / 7.48 * 1.97 * 1.18 in Receiver Weight: 91g / 3.22 oz Transmitter Size: 10.5 * 5 * 2.5 cm / 4.13 * 1.97 * 0.98 in Transmitter Weight: 79g / 2.81 oz Package List: 27.5 * 16 * 4cm / 10.83 * 6.3 * 1.57 in Package Weight: 261g / 9.25 oz Package List: 1 * Circuit Breaker Finder (Receiver) 1 * Socket Tester (Transmitter) 1 * User Manual
Uni-T
UNI-T UT25A UT25A/B Automatic Circuit Breaker Finder Socket Tester with LED Indicator
UNI-T UT501A 1000V Insulation Resistance Meter Ground Tester Megohmmeter Voltmeter w/LCD Backlight
Features: For measuring insulation resistance, AC voltage, DC voltage, etc. 2.7 (65*25mm) large LCD screen with large digital-readout with backlight for clear reading. Overload indication for safety operation. Automatic measurement and discharge voltage automatically. Red alarm light is on when high voltage outputs. Low battery indicator to remind you to replace battery to ensure measurement accuracy. 10MO internal resistance test. Features of high accuracy, stable performance, easy operation and reliability. Professional in electric equipment maintenance, testing and inspection. Red lid to protect the button and screen of the meter. Storage pouch included, smooth zipper closure. Specifications: Model: UT501A Material: PP Max. Display: 1999 Insulation Resistance (O): Test Voltage: 100V/250V/500V/1000V 0%~10% 100V: 0.00M O~100MO (3%+5) 250V: 0.00M O~ 99.9M O (3%+5); 100MO~ 5.5G O (5%+5) 500V: 0.00M O~ 99.9M O (3%+5); 100MO~ 5.5G O (5%+5) 1000V: 0.00M O~ 99.9M O (3%+5); 100MO~ 5.5G O (5%+5) Load Current: 50V(R=50KO) 1mA 0%~10%; 100V(R=100KO) 1mA 0%~10%; 250V(R=250KO) 1mA 0%~10% 500V(R=500KO) 1mA 0%~10%; 1000V(R=1MO) 1mA 0%~10% Short Circuit Current: 2mA AC Voltage (V): 30V~750V (2%+3) Working Temperature: 0~35? Storage Temperature: -20~60? Power: 6 * 1.5V Alkaline batteries (not included) LCD Size: 65 * 25mm / 2.56 * 0.98 in Item Size: 150 * 100 * 71mm / 5.91 * 3.94 * 2.79 in Item Weight: 588g / 20.75 oz Package List: 1 * UNI-T UT501A Insulation Resistance Meter 1 * Pair Test Lead 1 * Pair Alligator Clips 1 * Carrying Bag 1 * English Manual
Uni-T
UNI-T UT501A 1000V Insulation Resistance Meter Ground Tester Megohmmeter Voltmeter w/LCD Backlight
UNI-T SMD Tester Resistor Capacitor Diode (RCD) Parameter Meter LCD Auto Range SMD Digital Multimeter
This product is a miniaturized, integrative, brand new instrument for measurements of SMD resistance, capacitance, diode (RCD) parameters and battery voltage. In addition, it can also be used for LED, zener diode and on/off circuit testing. This tester is a great tool for electronic factories and electronic devices maintenance. Features: The UT116C is designed for measurement of resistance, capacitance, diode, battery voltage; and can also do on or off circuit and zener diode polarity/LED testing. With practical features, such as auto-range, data hold, low battery indicator, LCD display with 6000 counts,and auto-power off. Compact and portable, the pen can be rotated by 180for easy reading and operation. Constructed with durable ABS housing and gold-plated tip to prevent rust. Ideal tool for electronic engineers, repairman or professionals who engaged in SMD testing. Specifications: Model (Optional) UT116A UT116C Material ABS Display counts 3000 6000 Resistance 30MO 60MO Capacitance 30mF 100mF Diode test 3V 3.2V LED/stabilivolt About 21V/1mA Continuity Test
Uni-T
UNI-T SMD Tester Resistor Capacitor Diode (RCD) Parameter Meter LCD Auto Range SMD Digital Multimeter
UNI-T SMD Tester Resistor Capacitor Diode (RCD) Parameter Meter LCD Auto Range SMD Digital Multimeter
This product is a miniaturized, integrative, brand new instrument for measurements of SMD resistance, capacitance, diode (RCD) parameters and battery voltage. In addition, it can also be used for LED, zener diode and on/off circuit testing. This tester is a great tool for electronic factories and electronic devices maintenance. Features: The UT116C is designed for measurement of resistance, capacitance, diode, battery voltage; and can also do on or off circuit and zener diode polarity/LED testing. With practical features, such as auto-range, data hold, low battery indicator, LCD display with 6000 counts,and auto-power off. Compact and portable, the pen can be rotated by 180for easy reading and operation. Constructed with durable ABS housing and gold-plated tip to prevent rust. Ideal tool for electronic engineers, repairman or professionals who engaged in SMD testing. Specifications: Model (Optional) UT116A UT116C Material ABS Display counts 3000 6000 Resistance 30MO 60MO Capacitance 30mF 100mF Diode test 3V 3.2V LED/stabilivolt About 21V/1mA Continuity Test
Uni-T
UNI-T SMD Tester Resistor Capacitor Diode (RCD) Parameter Meter LCD Auto Range SMD Digital Multimeter
UNI-T SMD Tester Resistor Capacitor Diode (RCD) Parameter Meter LCD Auto Range SMD Digital Multimeter
This product is a miniaturized, integrative, brand new instrument for measurements of SMD resistance, capacitance and diode (RCD) parameters. In addition, it can also be used for LED, zener diode, on/off circuit and maximum 36V DC voltage measurement. This tester is a great tool for electronic factories and electronic devices maintenance. Features: The UT116A has rich functionality including automatic identification of resistance, capacitance, diode and on or off circuit; zener diode polarity/LED test, and can also measure Max. 36V DC voltage. With practical features, such as auto-range, data hold, low battery indicator, LCD display with 3000 counts,and auto-power off. Compact and portable, the pen can be rotated by 180for easy reading and operation. Constructed with durable ABS housing and gold-plated tip to prevent rust. Ideal tool for electronic engineers, repairman or professionals who engaged in SMD testing. Specifications: Model (Optional) UT116A UT116C Material ABS Display counts 3000 6000 Resistance 30MO 60MO Capacitance 30mF 100mF Diode test 3V 3.2V LED/stabilivolt About 21V/1mA Continuity Test
Uni-T
UNI-T SMD Tester Resistor Capacitor Diode (RCD) Parameter Meter LCD Auto Range SMD Digital Multimeter
UNI-T UT203 400A AC/DC Auto Range Digital Clamp Multimeter w/Voltage Resistance Frequency Test
Features: Display Count: 3999 Auto Range: Jaw Capacity: 28mm Duty Cycle: 0.1 %~ 99.9 % Diode: Auto Power Off: Continuity Buzzer: Low Battery Indication: Data Hold: Relative Mode: Setup: Input Impedance for DCV: Around 10MO Specifications: Model: UT203 AC Current (A): 40A/400A ( 2.5 %+5) DC Current (A): 40A/400A (2%+3) AC Voltage (V): 4V/40V/400V/600V (1%+5) DC Voltage (V): 400mV/4V/40V/400V/600V ( 0.8 %+1) Resistance (O): 400O/4kO/40kO/400kO/4MO/40MO (1%+2) Frequency (Hz): 10Hz~1MHz ( 0.1 %+3) General Characteristic: Power: 9V Battery(6F22) (not included) Product Net Weight: 260g Product Size: 208mm * 76mm * 30 mm LCD Size: 35.6 * 18mm Product Color: Red and Grey Package Size: 23.5 * 9 * 6cm / 9.3 * 3.5 * 2.4 in Package Weight: 352g / 12.4 oz Package List: 1 * UNI-T UT203 Digital Clamp Multimeter 1 * Test Lead 1 * Carrying Bag 1 * English Manual
Uni-T
UNI-T UT203 400A AC/DC Auto Range Digital Clamp Multimeter w/Voltage Resistance Frequency Test
UNI-T UT210B True RMS 200A AC Mini Clamp Meters Ammeter w/ NCV Test & LCD Backlight
Features: Ultra-portable tools for electricians. 200A AC current measurement with 1mA resolution. True RMS response for AC current. Non-contact voltage detection with LED indication. Display backlight. Data HOLD, MAX, MIN, MAX-MIN, and REL model. Max. display: 2000 counts. Auto Power Off Low Battery Indication. Specifications: Model: UT210B AC Current (A): 2A/20A/200A ( 1.0 %+9) General Characteristic: Power: 2 * AAA 1.5V (not included) LCD Size: 37.3 mm * 21 mm Product Net Weight: 60g Product Size: 155mm * 60mm * 33.5 mm Product Color: Red and Grey Package Size: 16.5 * 6.8 * 4cm / 6.5 * 2.7 * 1.5 in Package Weight: 172g / 6.1 oz Package List: 1 * UNI-T UT210B Mini Clamp Meter 1 * English Manual
Uni-T
UNI-T UT210B True RMS 200A AC Mini Clamp Meters Ammeter w/ NCV Test & LCD Backlight
UNI-T SMD Tester Resistor Capacitor Diode (RCD) Parameter Meter LCD Auto Range SMD Digital Multimeter
This product is a miniaturized, integrative, brand new instrument for measurements of SMD resistance, capacitance and diode (RCD) parameters. In addition, it can also be used for LED, zener diode, on/off circuit and maximum 36V DC voltage measurement. This tester is a great tool for electronic factories and electronic devices maintenance. Features: The UT116A has rich functionality including automatic identification of resistance, capacitance, diode and on or off circuit; zener diode polarity/LED test, and can also measure Max. 36V DC voltage. With practical features, such as auto-range, data hold, low battery indicator, LCD display with 3000 counts,and auto-power off. Compact and portable, the pen can be rotated by 180for easy reading and operation. Constructed with durable ABS housing and gold-plated tip to prevent rust. Ideal tool for electronic engineers, repairman or professionals who engaged in SMD testing. Specifications: Model (Optional) UT116A UT116C Material ABS Display counts 3000 6000 Resistance 30MO 60MO Capacitance 30mF 100mF Diode test 3V 3.2V LED/stabilivolt About 21V/1mA Continuity Test
Uni-T
UNI-T SMD Tester Resistor Capacitor Diode (RCD) Parameter Meter LCD Auto Range SMD Digital Multimeter
UNI-T UT33B+ Handheld LCD Digital Multimeter DC/AC Voltage DC Current Meter Resistance Tester Voltmeter Ammeter
This multimeter is designed to safely and accurately troubleshoot a variety of automotive and household electrical problems. It is provided with a LCD display for clear reading. It can be used to measure DC/AC voltage, DC current, resistance, diode, etc. Features: Max. display value: 1999. Large LCD display with backlight for clear reading. Can measure DC/AC voltage, DC current, diode and resistance. Includes auto power off, auto backlight close and buzzer function. Equipped with a back bracket for supporting multimeter, and also can collect test probe for your convenience. Protected by rubber for drop protection. Great for troubleshooting automotive and household electrical problems. Specifications: Brand Name: UNI-T Color: Grey + Red Material: ABS Maximum Display: 1999 Range Control: Manual Screen Size: 53 * 28mm DC Voltage: 200mV~600V AC Voltage: 200V~600V DC Current: 200µA~10A Resistance: 200O~20MO Diode Test: Yes Continuity Buzzer: Yes Safety Level: CAT ? 600V Auto Power Off: about 15mins Power Supply: 2 * 1.5V AAA Batteries (NOT Included) Operating Temperature: 0~40C(32~104F) Storage Temperature: -10~50C(14~122F) Item Size: Approx. 13.4 * 7.7 * 4.7 cm / 5.28 * 3.03 * 1.85 in (L * W * H) Item Weight: Approx. 188g / 6.63 oz (Without Battery) Package Size: Approx. 17.6 * 10.8 * 5.8 cm / 6.93 * 4.25 * 2.28 in (L * W * H) Package Weight: Approx. 296g / 10.44 oz Package List: 1 * Digital Multimeter 1 * Pair of Test Leads 1 * User Manual (English)
Uni-T
UNI-T UT33B+ Handheld LCD Digital Multimeter DC/AC Voltage DC Current Meter Resistance Tester Voltmeter Ammeter
UNI-T UT136C+ LCD Digital Multimeter DC/AC Voltage Current Meter Capacitance Resistance Diode Tester Voltmeter Ammeter
This multimeter is designed to safely and accurately troubleshoot a variety of automotive and household electrical problems. It is provided with a LCD display for clear reading. It can be used to measure DC/AC voltage/current, resistance, capacitance, frequency, diode, triode and continuity test, etc. Features: Max. display value: 3999. Large LCD display with backlight for clear reading. Can measure DC/AC voltage/current, diode, triode, resistance, frequency, capacitance, and continuity test, etc. Can test the temperature with unit of C/F. Includes data hold and auto power off function. With overload protection on all ranges. Low battery indication and warning alarm function. Equipped with a back bracket for supporting multimeter, and also can collect test probe for your convenience. Protected by rubber for drop protection. Great for troubleshooting automotive and household electrical problems. Specifications: Brand Name: UNI-T Color: Grey + Red Material: ABS Maximum Display: 3999 Range Control: Auto DC Voltage: 400mV/4V/40V/400V/1000V AC Voltage: 400mV/4V/40V/400V/1000V DC Current: 400µA/4mA/40mA/400mA/4A/10A AC Current: 400µA/4mA/40mA/400mA/4A/10A Resistance: 400O/4000O/40kO/400kO/4MO/40MO Capacitance: 4nF/40nF/400nF/4µF/40µF/400µF/4mF/40mF Frequency: 400Hz-40MHz Temperature: -40~1000C / -40~1832F Diode Test: Yes Continuity Buzzer: Yes Transistor hFE Test: Yes Auto Power Off: about 15mins Safety Level: CAT ? 1000V/CAT ? 600V Power Supply: 2 * 1.5V AA Batteries (NOT Included) Operating Temperature: 0~40C(32~104F) Storage Temperature: -10~50C(14~122F) Item Size: Approx. 17.5 * 8.3 * 5.3 cm / 6.89 * 3.27 * 2.09 in (L * W * H) Item Weight: Approx. 291g / 10.26 oz (Without Battery) Package Size: Approx. 22.2 * 11 * 6.3 cm / 8.74 * 4.33 * 2.48 in (L * W * H) Package Weight: Approx. 420g / 14.82 oz Package List: 1 * Digital Multimeter 1 * Pair of Test Leads 1 * Thermocouple Sensor Probe 1 * User Manual (English)
Uni-T
UNI-T UT136C+ LCD Digital Multimeter DC/AC Voltage Current Meter Capacitance Resistance Diode Tester Voltmeter Ammeter
UNI-T UT136C+ LCD Digital Multimeter DC/AC Voltage Current Meter Capacitance Resistance Diode Tester Voltmeter Ammeter
This multimeter is designed to safely and accurately troubleshoot a variety of automotive and household electrical problems. It is provided with a LCD display for clear reading. It can be used to measure DC/AC voltage/current, resistance, capacitance, frequency, diode, triode and continuity test, etc. Features: Max. display value: 3999. Large LCD display with backlight for clear reading. Can measure DC/AC voltage/current, diode, triode, resistance, frequency, capacitance, and continuity test, etc. Can test the temperature with unit of C/F. Includes data hold and auto power off function. With overload protection on all ranges. Low battery indication and warning alarm function. Equipped with a back bracket for supporting multimeter, and also can collect test probe for your convenience. Protected by rubber for drop protection. Great for troubleshooting automotive and household electrical problems. Specifications: Brand Name: UNI-T Color: Grey + Red Material: ABS Maximum Display: 3999 Range Control: Auto DC Voltage: 400mV/4V/40V/400V/1000V AC Voltage: 400mV/4V/40V/400V/1000V DC Current: 400µA/4mA/40mA/400mA/4A/10A AC Current: 400µA/4mA/40mA/400mA/4A/10A Resistance: 400O/4000O/40kO/400kO/4MO/40MO Capacitance: 4nF/40nF/400nF/4µF/40µF/400µF/4mF/40mF Frequency: 400Hz-40MHz Temperature: -40~1000C / -40~1832F Diode Test: Yes Continuity Buzzer: Yes Transistor hFE Test: Yes Auto Power Off: about 15mins Safety Level: CAT ? 1000V/CAT ? 600V Power Supply: 2 * 1.5V AA Batteries (NOT Included) Operating Temperature: 0~40C(32~104F) Storage Temperature: -10~50C(14~122F) Item Size: Approx. 17.5 * 8.3 * 5.3 cm / 6.89 * 3.27 * 2.09 in (L * W * H) Item Weight: Approx. 291g / 10.26 oz (Without Battery) Package Size: Approx. 22.2 * 11 * 6.3 cm / 8.74 * 4.33 * 2.48 in (L * W * H) Package Weight: Approx. 420g / 14.82 oz Package List: 1 * Digital Multimeter 1 * Pair of Test Leads 1 * Thermocouple Sensor Probe 1 * User Manual (English)
Uni-T
UNI-T UT136C+ LCD Digital Multimeter DC/AC Voltage Current Meter Capacitance Resistance Diode Tester Voltmeter Ammeter
UNI-T HDMI Wire Tester HDMI-mini Cable Tester Check Disorder Short Open and Cross Status HD Cables Test
Want to own the professional HDMI cable tester to test HDMI interfaces of projectors? You should try our HDMI-mini Cable Tester. This instrument is a accurate handheld HDMI cable testing tool. Features: Test HDMI cable, HD wire with HDMI HDMI-Mini connectors. Fast and accurate verification with Type A - A, Type C - C and Type A - C connectors. Check disorder, short, open and cross status of HDMI cables. Mapping continuity and proper configuration. 19 pins and grounded connection and 4 status leds. Adjustable test modes: Scan and full display testing mode. NOTE: 1. Don & #39; t connected high voltage lines to avoid buring out the machine. 2. Connected the cable to the right port. 3. Read the user manual before use it. Specifications: Brand Name: UNI-T Material: ABS Color: Red Type: HDMI Wire Tester Port: HDMI- A/C Testing Type: HDMI Cable Work Temperature: 0~40?,20%-80% RH Storage Temperature: -10~50?, 10%-90% RH Operating Altitude:
Uni-T
UNI-T HDMI Wire Tester HDMI-mini Cable Tester Check Disorder Short Open and Cross Status HD Cables Test
UNI-T UT39C+ LCD Digital Multimeter DC/AC Voltage Current Meter NCV Capacitance Resistance Diode Tester Voltmeter Ammeter
This multimeter is designed to safely and accurately troubleshoot a variety of automotive and household electrical problems. It is provided with a LCD display for clear reading. It can be used to measure DC/AC voltage/current, resistance, capacitance, frequency, temperature, diode, triode and continuity test, etc. Features: Max. display value: 3999. Large LCD display with backlight for clear reading. Can measure DC/AC voltage/current, frequency, diode, triode, resistance, capacitance, and continuity test. Includes NCV testing, relative value testing, data hold and auto power off function. Can test the temperature with unit of C/F. With overload protection on all ranges. Low battery indication and warning alarm function. Equipped with a back bracket for supporting multimeter, and also can collect test probe for your convenience. Protected by rubber for drop protection. Great for troubleshooting automotive and household electrical problems. Specifications: Brand Name: UNI-T Color: Grey + Red Material: ABS Maximum Display: 3999 Range Control: Manual DC Voltage: 400mV/4V/40V/400V/1000V AC Voltage: 4V/40V/400V/750V DC Current: 40µA/400µA/4mA/40mA/400mA/10A AC Current: 40mA/400mA/10A Resistance: 400O/4kO/40kO/400kO/4MO/40MO Capacitance: 4nF/400nF/4µF/40µF/400µF/4mF Frequency: 10Hz-1MHz Temperature: -40~1000C / -40~1832F NCV Test: Yes Diode Test: Yes Continuity Buzzer: Yes Transistor hFE Test: Yes Auto Power Off: about 15mins Safety Level: CAT ? 1000V/CAT ? 600V Power Supply: 2 * 1.5V AA Batteries (NOT Included) Operating Temperature: 0~40C(32~104F) Storage Temperature: -10~50C(14~122F) Item Size: Approx. 17.5 * 8.3 * 5.3 cm / 6.89 * 3.27 * 2.09 in (L * W * H) Item Weight: Approx. 288g / 10.16 oz (Without Battery) Package Size: Approx. 22.2 * 11 * 6.3 cm / 8.74 * 4.33 * 2.48 in (L * W * H) Package Weight: Approx. 421g / 14.85 oz Package List: 1 * Digital Multimeter 1 * Pair of Test Leads 1 * Thermocouple Sensor Probe 1 * User Manual (English)
Uni-T
UNI-T UT39C+ LCD Digital Multimeter DC/AC Voltage Current Meter NCV Capacitance Resistance Diode Tester Voltmeter Ammeter
UNI-T Portable Non-contact AC Voltage Tester Pen Shaped V~Alert Detector with Sound and Light Alarm and LED Flashlight
The UT12D with high and low dual-mode voltage range detection 24V~1000V and 90V~1000V, intelligently identifies zero-fire lines. CAT IV 1000V safety level ensures user-safe, audible and visual alarm synchronization, it & #39; s an essential tool for industry and home. Features: High and low dual sensitivity AC voltage range of 24V~1000V 90V~1000V Detect AC voltage by contacting the power socket or getting near the live wire with non-contact tip. Visual and audible alarm to secure your safety. With flashlight, convenient to use at night or dark corner. Intelligently identifies zero-fire lines, low voltage indication. Automatically turn off when no operation and no detection of AC voltage after 5 minutes. Light weight and mini size allows you to take anywhere anytime. Specifications: Material: ABS High Low Dual Mode Detect Range: 24V~1000V(Low Sensitivity, green) / 90V~1000V(High Sensitivity, red) Frequency: 50/60Hz Alarm Mode: Sound and light alarm Flashlight: White LED light Auto Power Off: Approx. 5 minutes Low Battery Indication: 2.4V Drop Test: 1m Zero-fire Lines Distinguish: Yes Power Supply: 2 * 1.5V AAA battery (NOT included) Security Level: CAT IV 1000V Operating Temperature: 0~40? Storage Temperature: -10~50? Item Size: Approx. 150 * 23 * 18mm / 5.91 * 0.91 * 0.71 in Item Weight: Approx. 32g / 1.14 oz Package Weight: Approx. 52g / 1.85 oz Package Size: Approx. 20 * 4.5 * 4.5 cm / 7.88 * 1.77 * 1.77 in Package List: 1 * Voltage Tester Pen 1 * User Manual (English)
Uni-T
UNI-T Portable Non-contact AC Voltage Tester Pen Shaped V~Alert Detector with Sound and Light Alarm and LED Flashlight
UNI-T UT125C Mini LCD Digital Multimeter DC/AC Voltage Current Meter NCV Capacitance Resistance Diode Tester Voltmeter Ammeter
This multimeter is designed to safely and accurately troubleshoot a variety of automotive and household electrical problems. It is provided with a LCD display for clear reading. It can be used to measure DC/AC voltage/current, resistance, capacitance, frequency, diode, triode and continuity test, etc. Features: Max. display value: 4000. Compact size and light weight for easy operation. LCD display with backlight for clear reading. Can measure DC/AC voltage/current, frequency, diode, triode, resistance, capacitance, and continuity test. Includes NCV test, duty cycle test, data hold and auto power off function. With overload protection on all ranges. Low battery indication and warning alarm function. Equipped with a back bracket for supporting multimeter, and also can collect test probe for your convenience. Protected by rubber for drop protection. Great for troubleshooting automotive and household electrical problems. Specifications: Brand Name: UNI-T Color: Grey + Red Material: ABS Maximum Display: 4000 DC Voltage: 0.1 mV~600V AC Voltage: 1mV~600V DC Current: 0.1 µA~400mA AC Current: 0.1 µA~400mA Resistance: 0.1 O~40MO Capacitance: 0.01 nF~100µF Frequency: 10~60KHz Duty Cycle: 20%~80% NCV Test: Yes Duty Cycle Test: Yes Diode Test: Yes Continuity Buzzer: Yes Transistor hFE Test: Yes Auto Power Off: about 15mins Safety Level: CAT ? 600V Power Supply: 2 * 1.5V AAA Batteries (NOT Included) Operating Temperature: 0~40C(32~104F) Storage Temperature: -10~50C(14~122F) Item Size: Approx. 11.2 * 5.8 * 3.5 cm / 4.41 * 2.28 * 1.38 in (L * W * H) Item Weight: Approx. 163g / 5.75 oz (Without Battery) Package Size: Approx. 16.5 * 8.5 * 4.5 cm / 6.50 * 3.35 * 1.77 in (L * W * H) Package Weight: Approx. 224g / 7.90 oz Package List: 1 * Digital Multimeter with Test Leads 1 * User Manual (English)
Uni-T
UNI-T UT125C Mini LCD Digital Multimeter DC/AC Voltage Current Meter NCV Capacitance Resistance Diode Tester Voltmeter Ammeter
UNI-T UT658 Digital LCD USB Voltage Current Meter U Disk Voltmeter Ameter Charging Capacity Tester DC3-9V 0-3A
UT658 USB tester is a new equipment to test the quality of charger/power bank for 3C products. It can give a comprehensive detection for the charging equipment, such as output voltage, output current, output capacity, output voltage stability, etc. With this instrument, you can test charging current with different charging cable, allowing you to select the optimal charging cable and saving the charging time for you. Features: Real time detection: test voltage, current and charging capacity. LCD display with multiple data, easy and clear for readings. DC3-9V voltage test range, 0-3A current range, 1% accuracy. Voltage alarm function: when the voltage is higher than 5.3V (display H) or lower than 4.7V (display L). With data storage function: memorize 10 groups of capacity data. Quick capacity data review and zero clearing function. U-disk current detection and USB interface voltage detection. Improve the charging efficiency and protect the charging equipment. Specifications: Input Voltage: DC 3V-9V Voltage Resolution: 0.01V Voltage Accuracy: 1% Current Range: 0A-3A Current Resolution: 0.01A Current Accuracy: (1%+2) Capacity: 0-9999mAH Data Storage: 10 Display: 26*17mm LCD Alarm: Yes Working Temperature: 0C~40C Storage Temperature: -10C~50C Interface: USB Dimensions: 84 * 29 * 12mm / 3.3 * 1.14 * 0.47 in Weight: 27g / 0.97 oz Package Size: 17 * 14 * 1.5 cm / 6.7 * 5.5 * 0.6 in Package Weight: 45g / 1.58 oz Package List: 1 * UNI-T UT658 USB Tester 1 * User Manual (English)
Uni-T
UNI-T UT658 Digital LCD USB Voltage Current Meter U Disk Voltmeter Ameter Charging Capacity Tester DC3-9V 0-3A
UNI-T UT256B True RMS Digital Fork Meter Clamp Multimeter AC/DC Voltage Current Resistance Capacitance NCV Test with Adjustable Backlight
It is a safe and reliable digital clamp meter with stable performance. It can measure AC/DC voltage, AC/DC current, resistance, capacitance, continuity, diode, continuity, NCV. Features: It is a safe and reliable digital clamp meter with stable performance. Measure AC/DC voltage, AC/DC current, resistance, capacitance, continuity, diode, continuity, NCV. Clamp head is the sensing device for AC/DC measurement. Fix the wire into the designated position to measure the current through the wire. Function selection, zero and hold function, flashlight, convenient to use. LCD display with backlight, convenient to read. Specifications: Display: LCD, Max. 5999 AC Current Range: 200.0A AC Current Accuracy: ( 2.5 %+5) DC Current Range: 200.0A DC Current Accuracy: ( 2.5 %+5) AC Voltage Range: 6.000V / 60.00V / 600.0V /750V AC Voltage Accuracy: ( 1.2 %+5)/( 1.2 %+3)/( 1.5 %+5) DC Voltage Range: 6.000V / 60.00V / 600.0V /1000V DC Voltage Accuracy: ( 0.8 %+3)/( 1.0 %+5) Resistance Range: 600.0 O/ 6.000 kO/ 60.00 kO/ 600.0 kO/ 6.000M O/ 60.00M O Resistance Accuracy: ( 1.2 %+2)/( 1.0 %+2)/( 1.2 %+2)/( 1.5 %+5) Capacitance Range: 60.00 nF/ 600.0 nF/ 6.000 µF/ 60.00 µF/ 600.0 µF/ 6.000 mF/ 60.00 mF Continuity Range: 600.0 O Diode Range: 6.000V Power Supply: 2 * 1.5V AA Batteries (not included) Item Size: 20.5 * 5 * 2.5 cm / 8.07 * 1.97 * 0.98 in Item Weight: 180g / 6.36 oz Package Size: 27 * 9 * 5.5 cm / 10.63 * 3.54 * 2.17 in Package Weight: 383g / 13.53 oz Package List: 1 * Clamp Meter 1 * Test Probe 1 * Bag 1 * User Manual
Uni-T
UNI-T UT256B True RMS Digital Fork Meter Clamp Multimeter AC/DC Voltage Current Resistance Capacitance NCV Test with Adjustable Backlight
UNI-T UT256B True RMS Digital Fork Meter Clamp Multimeter AC/DC Voltage Current Resistance Capacitance NCV Test with Adjustable Backlight
It is a safe and reliable digital clamp meter with stable performance. It can measure AC/DC voltage, AC/DC current, resistance, capacitance, continuity, diode, continuity, NCV. Features: It is a safe and reliable digital clamp meter with stable performance. Measure AC/DC voltage, AC/DC current, resistance, capacitance, continuity, diode, continuity, NCV. Clamp head is the sensing device for AC/DC measurement. Fix the wire into the designated position to measure the current through the wire. Function selection, zero and hold function, flashlight, convenient to use. LCD display with backlight, convenient to read. Specifications: Display: LCD, Max. 5999 AC Current Range: 200.0A AC Current Accuracy: ( 2.5 %+5) DC Current Range: 200.0A DC Current Accuracy: ( 2.5 %+5) AC Voltage Range: 6.000V / 60.00V / 600.0V /750V AC Voltage Accuracy: ( 1.2 %+5)/( 1.2 %+3)/( 1.5 %+5) DC Voltage Range: 6.000V / 60.00V / 600.0V /1000V DC Voltage Accuracy: ( 0.8 %+3)/( 1.0 %+5) Resistance Range: 600.0 O/ 6.000 kO/ 60.00 kO/ 600.0 kO/ 6.000M O/ 60.00M O Resistance Accuracy: ( 1.2 %+2)/( 1.0 %+2)/( 1.2 %+2)/( 1.5 %+5) Capacitance Range: 60.00 nF/ 600.0 nF/ 6.000 µF/ 60.00 µF/ 600.0 µF/ 6.000 mF/ 60.00 mF Continuity Range: 600.0 O Diode Range: 6.000V Power Supply: 2 * 1.5V AA Batteries (not included) Item Size: 20.5 * 5 * 2.5 cm / 8.07 * 1.97 * 0.98 in Item Weight: 180g / 6.36 oz Package Size: 27 * 9 * 5.5 cm / 10.63 * 3.54 * 2.17 in Package Weight: 383g / 13.53 oz Package List: 1 * Clamp Meter 1 * Test Probe 1 * Bag 1 * User Manual
Uni-T
UNI-T UT256B True RMS Digital Fork Meter Clamp Multimeter AC/DC Voltage Current Resistance Capacitance NCV Test with Adjustable Backlight
UNI-T UT658B USB LCD Digital Voltage Current Meter U Disk Voltmeter Ameter Charging Capacity Tester DC3~9V 0~3.5A
This USB tester is a new equipment with 100mm leading wire to test the quality of charger/power bank for 3C products. It can give a comprehensive detection for the charging equipment, such as output voltage, output current, output capacity, output voltage stability, etc. With this instrument, you can test charging current with different charging cable, allowing you to select the optimal charging cable and saving the charging time for you. Features: Built-in 100mm leading wire for more convenient operation. Real Time Detection: test voltage, current and charging capacity. LCD display with multiple data, easy and clear for readings. Testing Range: DC3~9V voltage, 0~ 3.5A current, (1%+5) accuracy. Voltage Alarm Function: when the voltage is higher than 5.3V (display H) or lower than 4.7V (display L). Data Storage Function: can memorize 10 groups of capacity data. Quick capacity data review and zero clearing function. U-disk current detection and USB interface voltage detection. Can improve the charging efficiency and protect the charging equipment. Specifications: Brand Name: UNI-T Material: ABS Input Voltage: DC3~9V Voltage Resolution: 0.01V Voltage Accuracy: (1%+5) Current Range: 0A~ 3.5A Current Resolution: 0.01A Current Accuracy: (1%+5) Capacity: 0~39999mAH Data Storage: 10 Display: 26*17mm LCD Alarm: Yes Working Temperature: -10C~40C Storage Temperature: -10C~50C Interface: USB Leading Wire Length: 100mm / 3.94 in Item Size: Approx. 7 * 2.7 * 1.2 cm / 2.76 * 1.06 * 0.47 in Item Weight: Approx. 30g / 1.06 oz Package Size: Approx. 9.7 * 4.8 * 1.6 cm / 3.82 * 1.89 * 0.63 in Package Weight: Approx. 36g / 1.27 oz Package List: 1 * USB Tester 1 * User Manual (English)
Uni-T
UNI-T UT658B USB LCD Digital Voltage Current Meter U Disk Voltmeter Ameter Charging Capacity Tester DC3~9V 0~3.5A
UNI-T True RMS Digital Multimeter Auto-Ranging Multitester High Accuracy Universal Meter 6000 Counts Backlit LCD VOM with Flashlight VFC Mode UT15B PRO
UT15B PRO / UT17B PRO are highly reliable true RMS digital multimeters. With built-in VFC anti-jamming start mode, they can filter out the carrier frequency interference or distortion voltage signal superimposed by the sine wave, and stably measure the output voltage of the inverter. They can do a wide range of tests including DC/AC voltage, DC/AC current, resistance, capacitance, diode, live wire. UT17B PRO has extra features measurement of temperature, frequency and duty ratio. They both provide up to 30KVA energy for protection from incorrect operation to ensure safety. Features: LCD display: big LCD screen with large digital-readout and backlight for clear readings. Reliable quality: employed double insulation design and protective rubber covering, which is robust, durable and impact-resistant, ensuring maximum safety. A host of measurement capabilities: DC/AC voltage, DC/AC current, resistance, capacitance, diode, live wire. Besides the above, UT17B PRO can also measure temperature, frequency and duty ratio. VFC mode: anti-interference, provides more accurate and stable measurement. Auto shut-off: to save power, it would automatically shut off if there is no operation for 15 minutes. This feature can be turned off as per your needs. Safety level: meet CAT-III 1000V and CAT-IV 600V standards. Greater convenience: a built-in flashlight will be very helpful in dark conditions, and the kickstand can free your hands with your work. More features: true RMS, 6000 counts, auto/manual range, buzzer alarm, data hold. Specifications: Brand Name: UNI-T Model: UT15B Pro / UT17B Pro (Optional) Material: ABS Color: Red Max. Display: 6200 Range Control: Auto/Manual range Operating Temperature: 0~40? (32~104?) Storage Temperature: -10~50? (14~122?) Relative Humidity: 0~30?: 75%RH, 30-40?: 50%RH Operating Altitude: 0~2000m DC Voltage Range: 600mV / 6V / 60V / 600V / 1000V AC Voltage Range: 600mV / 6V / 60V / 600V / 1000V (VFC: 600V) DC Current Range: 600µA / 6000µA / 60mA / 600mA / 6A / 10A AC Current Range: 600µA / 6mA / 60mA / 600mA / 6A / 10A Resistance Range: 600O / 6KO / 60KO / 600KO / 6MO / 60MO Capacitance Range: 6nF / 60nF / 600nF / 6µF / 60µF / 600µF / 6mF Frequency Range: 10Hz~100KHz (UT17B PRO only) Duty Ratio Range: 1%~99% (UT17B PRO only) Temperature Range: -55~500C / -67~932F (UT17B PRO only) Power Supply: 2 * 1.5V AA R6P battery (NOT included) Safety Level: CAT-III 1000V and CAT-IV 600V Item Size: 195 * 95 * 58mm / 7.67 * 3.74 * 2.28 in Item Weight: 445g / 15.69 oz Package Weight: 781g / 27.54 oz Package Size: 24.5 * 18 * 7cm / 9.64 * 7.08 * 2.75 in Packing List: 1 * Multimeter 1 * Storage Bag 1 * Test Leads (pair) 1 * User Manual
Uni-T
UNI-T True RMS Digital Multimeter Auto-Ranging Multitester High Accuracy Universal Meter 6000 Counts Backlit LCD VOM with Flashlight VFC Mode UT15B PRO
UNI-T Switching DC Power Supply 4 Digits Display LED 0-32V 0-6A High Precision Adjustable Mini Power Supply AC 220V 50Hz
This mini DC power supply is a single set of output, high precision double display switching DC power supply. It & #39; s single channel linear DC powersupply with low ripple/noise, overload protection and constant voltage/current features. Features: Mini but professional switching DC power supply with 0~32V/0~6A range and 10mV/1mA resolution. Double LED 4 digits display of voltage and current, high precision with single channel output. Voltage stabilization, current limiting, simple operation feature the DC power supply. Over voltage protection (OVP), over current protection (OCP) with setting function and over temperature protection. Independent output switch and the operation keys can be locked. With replaceable fuse, convenient to change the protective tube. Applied in production line test, electrical maintenance, aging products, battery charging, laboratories scientific research and teaching and allother need DC regulated power supply. Specifications: Plug Type: EU Plug Input Voltage: AC 220V10% 50Hz Output Current: 0 ~ 6A (Continuously Adjustable) Output Voltage: 0 ~ 32V (Continuously Adjustable) Output Power: 192W Type: Single power supply Load Regulation Rate: Voltage: 0.3 %+5mV, Current: 0.2 %+3mA Power Regulation Rate: Voltage: 0.3 %+5mV, Current: 0.2 %+3mA Voltage Resolution: 10mV Current Resolution: 1mA Digital Display: 4 Digits Red Green LED Digital Display Ripple Noise: Voltage: 10mVrms, Current: 5mArms Display Precision: 1% + 2 digits Operating Environment: 0~40? Rh80% Storage Environment: -15~70? Rh80% Rotary Knob Height: 20mm / 0.8 in Item Size: Approx. 79 * 230 * 150mm / 3.1 * 9.1 * 5.9 in (Excluding Rotary Knob) Item Weight: Approx. 1539g / 54.3 oz Package Size: Approx. 28.5 * 21.5 * 14cm / 11.2 * 8.5 * 5.5 in Package Weight: Approx. 1907g / 67.3 oz Package Lists: 1 * DC Power Supply 1 * Power Cord 1 * Instruction Manual
Uni-T
UNI-T Switching DC Power Supply 4 Digits Display LED 0-32V 0-6A High Precision Adjustable Mini Power Supply AC 220V 50Hz
UNI-T UT61D+ Digital Multimeter Auto Range High Precision Professional NCV Tester True RMS Multimeter Multifunctional Tester Electric Measuring Instrument Support Data Transmission Temperature
The UT61B+/UT61D+/UT61E+ is a handheld true RMS digital multimeter with high reliability and security (UT61B+/UT61D+: 6000 counts; UT61E+: 22000 counts). It features large screen, high resolution analog pointer display and full scale overload protection. The meter can measure AC/DC voltage/current, resistance, diode, transistor hFE (UT61E+), continuity, capacitance, frequency, duty ratio, temperature (UT61D+), etc. Loaded with functions like data transmission, data hold, relative value measurement, peak measurement (UT61D+/UT61E+), internal temperature alarm, low battery indication, backlight, auto power off, and NCV, it is an ideal measuring tool for many application Features: UT61D+ can measure multiple parameters, including DC/AC voltage, DC/AC current, resistance, diodes, capacitance, frequency, duty cycle, temperature, and carry out NCV detection and continuity test. Equipped with large LCD display with backlight which shows 6000 counts clear readings, easy to read. Ergonomically designed with kickstand for convenient use and the rubber case makes it durable for long time use. Comes with a protective rubber case to ensure durability, two test leads slots for better storage, and a kickstand to help the device to stand freely. Supports data transmission via the USB cable provided, more practical and useful. Provides buzzer alarm and indicator light for voltage and current measurement, diodes and continuity test, and NCV detection. Ideal tool for home circuit installation, electronics repair, electrical facilities maintenance, automobile repair, home appliances repair. Specifications: Brand: UNI-T Model: UT61B+/ UT61D+ / UT61E+ (Optional) Material: ABS Model UT61B+ UT61D+ UT61E+ AC voltage (V) 60mV~1000V; ( 1.0 %+3) 60mV~1000V; ( 1.0 %+3) 200mV~1000V; ( 0.8 %+10) DC voltage (V) 60mV~1000V; ( 0.5 %+3) 60mV~1000V; ( 0.5 %+3) 200mV~1000V; ( 0.05 %+5) AC current (A) 600µA~10A; ( 1.2 %+5) 600µA~20A; ( 1.2 %+5) 220µA~20A; ( 0.8 %+10) DC current (A) 600µA~10A; ( 1.0 %+2) 600µA~20A; ( 1.0 %+2) 220µA~20A; ( 0.5 %+10) Resistance (O) 600O~60MO; ( 1.0 %+2) 600O~60MO; ( 1.0 %+2) 220O~220MO; ( 0.5 %+10) Capacitance (F) 60nF~60mF; ( 3.0 %+5) 60nF~60mF; ( 3.0 %+5) 22nF~220mF; ( 3.0 %+5) Frequency (Hz) 10Hz~10MHz; ( 0.1 %+4) 10Hz~10MHz; ( 0.1 %+4) 10Hz~220MHz; ( 0.01 %+5) Duty cycle (%) 0.1 %~ 99.9 %; ( 2.0 %+5) NCV >100V Temperature N/A -40?~1000?; ( 1.0 %+3) -40?~1832?; ( 1.0 %+6) N/A Display count 6000 6000 22000 Auto/manual range Analog bar 31 31 46 True RMS Frequency response 40Hz~500Hz 40Hz~1KHz 40Hz~10KHz LPF (Low pass filter) N/A N/A LoZ V~ (Low impedance measurement) N/A N/A ACV+DCV N/A N/A Diode test Triode test N/A N/A
Uni-T
UNI-T UT61D+ Digital Multimeter Auto Range High Precision Professional NCV Tester True RMS Multimeter Multifunctional Tester Electric Measuring Instrument Support Data Transmission Temperature
UNI-T UT201+ 4000 Counts Digital Clamp Meter True RMS Multimeter Clamp Ammeter Voltage Meter NCV Test Universal Meter Tester AC Current Clamp Tester
Features: Multifunctional Clamp Meter: can be used to measure AC current, AC/DC voltage, resistance, Max/Min value, continuity test, and diode test. Measuring Range: 400A AC current, 600V AC/DC voltage, and 40MO resistance. Data Hold Max/Min: hold the measured data for conveniently checking or observing data. Backlight Function: 1.6 -inch LCD screen with backlight ON/OFF switchable for display data clearly. 28mm Jaw Opening: jaw opening of 28mm to measure current without touching or interrupting the circuit. Accessories: comes with a pair of test probes for convenient measurement, and a black zipper pouch for storing the clamp meter. Power Supply: powered by 2* 1.5V AAA battery (NOT included), convenient to operate. Reliable Functional: with good reliability and high precision, really practical for electrical equipment testing and maintenance. Specifications: Material: ABS Safety Rating: CAT II 600V, CAT III 300V Display Count: Max. 4000 Jaw Opening: 28mm Auto off: 15 minutes Range: Auto AC Current Range: 4.000A / 40.00A / 400.0A AC Current Resolution: 0.001A / 0.01A / 0.1A AC Current Frequency: 50Hz~100Hz AC Current Frequency Resolution: 0.1H z AC Voltage Range: 4.000V / 40.00V / 400.0V /600V AC Voltage Resolution: 0.001V / 0.01V / 0.1V /1V AC Voltage Frequency: 10Hz~10kHz AC Voltage Frequency Resolution: 0.01H z~ 0.01 kHz DC Voltage Range: 400.0 mV/ 4.000V / 40.00V / 400.0V /600V DC Voltage Resolution: 0.1 mV/ 0.001V / 0.01V / 0.1V /1V Resistance Range: 400.0 O/ 4.000 kO/ 40.00 kO/ 400.0 kO/ 4.000M O/ 40.00M O Resistance Resolution: 0.1 O/ 0.001 kO/ 0.01 kO/ 0.1 kO/ 0.001M O/ 0.01M O Continuity Range: 400.0 O Continuity Resolution: 0.1 O Diode Range: 4.000V Diode Resolution: 0.001V Operating Temperature: 0~30?(humidity 80%RH), 30~40?(humidity 75%RH), 40~50?(humidity 45%RH) Storage Temperature Humidity: -20~60?, 80%RH Altitude: 2, 000 meters Power Supply: 2 * 1.5V AAA battery (NOT included) Item Size: 215 * 63.5 * 36mm / 8.46 * 2.5 * 1.41 in Item Weight: 286g / 10.09 oz Package Weight: 380g / 13.41 oz Package Size: 23.5 * 9.2 * 5.3 cm / 9.25 * 3.62 * 2.09 in Package List: 1 * Clamp Meter 2 * Test Lead 1 * Storage Bag 1 * Manual (English)
Uni-T
UNI-T UT201+ 4000 Counts Digital Clamp Meter True RMS Multimeter Clamp Ammeter Voltage Meter NCV Test Universal Meter Tester AC Current Clamp Tester
UNI-T UT61D+ Digital Multimeter Auto Range High Precision Professional NCV Tester True RMS Multimeter Multifunctional Tester Electric Measuring Instrument Support Data Transmission Temperature
The UT61B+/UT61D+/UT61E+ is a handheld true RMS digital multimeter with high reliability and security (UT61B+/UT61D+: 6000 counts; UT61E+: 22000 counts). It features large screen, high resolution analog pointer display and full scale overload protection. The meter can measure AC/DC voltage/current, resistance, diode, transistor hFE (UT61E+), continuity, capacitance, frequency, duty ratio, temperature (UT61D+), etc. Loaded with functions like data transmission, data hold, relative value measurement, peak measurement (UT61D+/UT61E+), internal temperature alarm, low battery indication, backlight, auto power off, and NCV, it is an ideal measuring tool for many application Features: UT61D+ can measure multiple parameters, including DC/AC voltage, DC/AC current, resistance, diodes, capacitance, frequency, duty cycle, temperature, and carry out NCV detection and continuity test. Equipped with large LCD display with backlight which shows 6000 counts clear readings, easy to read. Ergonomically designed with kickstand for convenient use and the rubber case makes it durable for long time use. Comes with a protective rubber case to ensure durability, two test leads slots for better storage, and a kickstand to help the device to stand freely. Supports data transmission via the USB cable provided, more practical and useful. Provides buzzer alarm and indicator light for voltage and current measurement, diodes and continuity test, and NCV detection. Ideal tool for home circuit installation, electronics repair, electrical facilities maintenance, automobile repair, home appliances repair. Specifications: Brand: UNI-T Model: UT61B+/ UT61D+ / UT61E+ (Optional) Material: ABS Model UT61B+ UT61D+ UT61E+ AC voltage (V) 60mV~1000V; ( 1.0 %+3) 60mV~1000V; ( 1.0 %+3) 200mV~1000V; ( 0.8 %+10) DC voltage (V) 60mV~1000V; ( 0.5 %+3) 60mV~1000V; ( 0.5 %+3) 200mV~1000V; ( 0.05 %+5) AC current (A) 600µA~10A; ( 1.2 %+5) 600µA~20A; ( 1.2 %+5) 220µA~20A; ( 0.8 %+10) DC current (A) 600µA~10A; ( 1.0 %+2) 600µA~20A; ( 1.0 %+2) 220µA~20A; ( 0.5 %+10) Resistance (O) 600O~60MO; ( 1.0 %+2) 600O~60MO; ( 1.0 %+2) 220O~220MO; ( 0.5 %+10) Capacitance (F) 60nF~60mF; ( 3.0 %+5) 60nF~60mF; ( 3.0 %+5) 22nF~220mF; ( 3.0 %+5) Frequency (Hz) 10Hz~10MHz; ( 0.1 %+4) 10Hz~10MHz; ( 0.1 %+4) 10Hz~220MHz; ( 0.01 %+5) Duty cycle (%) 0.1 %~ 99.9 %; ( 2.0 %+5) NCV >100V Temperature N/A -40?~1000?; ( 1.0 %+3) -40?~1832?; ( 1.0 %+6) N/A Display count 6000 6000 22000 Auto/manual range Analog bar 31 31 46 True RMS Frequency response 40Hz~500Hz 40Hz~1KHz 40Hz~10KHz LPF (Low pass filter) N/A N/A LoZ V~ (Low impedance measurement) N/A N/A ACV+DCV N/A N/A Diode test Triode test N/A N/A
Uni-T
UNI-T UT61D+ Digital Multimeter Auto Range High Precision Professional NCV Tester True RMS Multimeter Multifunctional Tester Electric Measuring Instrument Support Data Transmission Temperature
UNI-T UT12M AC Voltage Detector Meter 24V-1000V Non-Contact Portable Tester Pen Socket Volt Current Electric Test Pencil with Sound and Light Alarm and LED Flashlight
UT12E and UT12M are UNI-T & #39; s professional grade voltage detectors. They are designed with IP67 dust/water resistant and can withstand 2-meter drop. These durable devices are great for working in harsh environments. UT12E has an extra vibration mode and UT12M is able to detect magnetic fields. Features: High AC voltage 90V~1000V and low AC voltage 24V~1000V dual testing modes, which is helpful for you to adjust sensitivity based on voltage. Able to distinguish neutral wire from live wire. UT12E has an extra vibration mode and UT12M is able to detect magnetic fields. Visual and audible alarm at the same time when voltage is detected, and meet CAT-IV 1000V standard to ensure maximum safety. Built-in flashlight makes it convenient to use at night or dark corner. Automatically turn off when no operation and no detection of AC voltage after 5 minutes. IP67 waterproof rating and can withstand 2-meter drop, suitable for working in harsh environments. Compact and portable design allows you to take anywhere anytime. Specifications: Material: ABS Model: UT12E / UT12M (Optional) AC voltage (Low): 24V~1000V AC voltage (High): 90V~1000V Frequency range: 50/60Hz Auto power off: about 5 mins Low Battery Indication: 2.4V Drop Test: 2m Power supply: 2 * 1.5V AAA battery (NOT included) Safety Level: CAT IV 1000V IP Rating: IP67 Item Size: 160.5 * 21.5 * 25mm / 6.31 * 0.84 * 0.98 in Item Weight: 72g / 2.53 oz Package Weight: 85g / 2.99 oz Package Size: 22.5 * 10.2 * 2.5 cm / 8.85 * 4.01 * 0.98 in Packing List: 1 * Voltage Detector 1 * User Manual (English)
Uni-T
UNI-T UT12M AC Voltage Detector Meter 24V-1000V Non-Contact Portable Tester Pen Socket Volt Current Electric Test Pencil with Sound and Light Alarm and LED Flashlight
UNI-T UT12M AC Voltage Detector Meter 24V-1000V Non-Contact Portable Tester Pen Socket Volt Current Electric Test Pencil with Sound and Light Alarm and LED Flashlight
UT12E and UT12M are UNI-T & #39; s professional grade voltage detectors. They are designed with IP67 dust/water resistant and can withstand 2-meter drop. These durable devices are great for working in harsh environments. UT12E has an extra vibration mode and UT12M is able to detect magnetic fields. Features: High AC voltage 90V~1000V and low AC voltage 24V~1000V dual testing modes, which is helpful for you to adjust sensitivity based on voltage. Able to distinguish neutral wire from live wire. UT12E has an extra vibration mode and UT12M is able to detect magnetic fields. Visual and audible alarm at the same time when voltage is detected, and meet CAT-IV 1000V standard to ensure maximum safety. Built-in flashlight makes it convenient to use at night or dark corner. Automatically turn off when no operation and no detection of AC voltage after 5 minutes. IP67 waterproof rating and can withstand 2-meter drop, suitable for working in harsh environments. Compact and portable design allows you to take anywhere anytime. Specifications: Material: ABS Model: UT12E / UT12M (Optional) AC voltage (Low): 24V~1000V AC voltage (High): 90V~1000V Frequency range: 50/60Hz Auto power off: about 5 mins Low Battery Indication: 2.4V Drop Test: 2m Power supply: 2 * 1.5V AAA battery (NOT included) Safety Level: CAT IV 1000V IP Rating: IP67 Item Size: 160.5 * 21.5 * 25mm / 6.31 * 0.84 * 0.98 in Item Weight: 72g / 2.53 oz Package Weight: 85g / 2.99 oz Package Size: 22.5 * 10.2 * 2.5 cm / 8.85 * 4.01 * 0.98 in Packing List: 1 * Voltage Detector 1 * User Manual (English)
Uni-T
UNI-T UT12M AC Voltage Detector Meter 24V-1000V Non-Contact Portable Tester Pen Socket Volt Current Electric Test Pencil with Sound and Light Alarm and LED Flashlight
UNI-T 2-CH Digital Oscilloscope with 7-inch LCD Display Scopemeter with 100MHz Bandwidth 2 Channels 500MS/S Real Time Sample Rate 64kpts Depth Storage US Plug
With the characteristics of large 7-inch display, 100MHz band width, dual channel, max. 500MS/s real-time sampling rate, 64kpts storage length and 5 types of trigger mode, this fine-quality UNI-T UTD2010e plus Digital Oscilloscope features complete functions, convenient operation, long service life and high cost performance. It can transform the invisible electric signals into visible images, which is convenient for people to study the changing process of various electrical phenomena, widely used in communication, embedded systems, computer, research, education and other industries and fields. Features: [Humanized Design] The foot stool with adjustable tilt angle design and the hidden handle require less space. [Large LCD Screen] 7-inch color TFT LCD screen with 800*480 pixels high resolution, more vivid and clearer, making monitoring and analyzing work much easier. [Wide Sensitive Scopemeter] 100MHz bandwidths; 500MS/s real-time sample rate; dual analog channel with wide vertical range (1mV/div~20V/div). High accuracy and wide measurement range meet different analyzing demands. [Easy to Use] Supports plug-and-play USB storage device. Communication with and remote control of computer through the USB device. Multilingual menu available, with multiple functional button for fast operation. [Trigger Control] The oscilloscope provides 5 trigger types: Edge trigger, Pulse Width trigger, Slope trigger, Video trigger and Alternating trigger. Each type of trigger owns different sub menus. [One-click Measurement] It display 34 waveform parameters in one-click, much more convenient and efficient to view the waveform information. [Auto Cursor Function] Quickly measure the difference between two points of the waveform, helping engineers analyze the real-time measurement waveform. [Waveform Math Function] Contains +, -, *, /, FFT, digital filtering, easy to deal with test problems. [Fast Capture] Features copy function for fast storage information; capable of recording length up to 64kpts, and waveform record up to 1000 screen. [Storage Medium] DSO and USB Selectable storage location. DSO can store 20 groups, USB can store 200 groups. [Wide Applications] Applicable to electronic circuit debugging, circuit testing, design and manufacture, education and training, automobile maintenance and testing. Specifications: Model: UTD2102e PLUS Material: ABS Color: White Plug: EU / US (Optional) Power Supply: 220V (EU plug), 110V (US plug), 50/60Hz Display: 7-inch TFT LCD, WVGA (800480 pixels) Basic Function Bandwidth: 100MHz Channel: 2 Max. Real Time Sample Rate: 500MS/s Rise Time (BNC typical): 3.5 ns Storage Depth: 64kpts Waveform Capture Rate: 5000wfms/s Vertical Sensitively Range (V/div): 1mV/div~20V/div Time Base Range (s/div): 2ns/div~50s/div Trigger Trigger Mode: Edge, Pulse Width, Slope, Video, Alternating Trigger Coupling: AC, DC, HF, LF, Noise Cursor Measurement: Time, Voltage, Tracking Parameter Measurement: automatic measurement of 34 kinds of waveform parameters Waveform Math: +, -,,, FFT, digital filtering Recorded Frames: 1000 frames of screen data Interface: USB Host, USB Device, Pass/Fail, LAN (Optional) Probe Compensation Signal Output Voltage: Approx. 3Vp-p (1MO) Probe Compensation Signal Frequency: 10Hz, 100Hz, 1kHz, 10kHz Item Size: Approx. 31*15*13cm / 12.2 * 5.91 * 5.12 in Item Weight: Approx. 1965g / 69.31 oz Package Size: Approx. 39.5 *21* 24.5 cm / 15.55 * 8.27 * 9.65 in Package Weight: Approx. 2846g / 100.39 oz Note: - Please read the Users Manual before use. - Scan the QR code on the machine, you can directly enter the official website to download the users manual. Packing List: 1 * Digital Oscilloscope 1 * Oscilloscope Passive Probe Kit 1 * Power Cable 1 * USB Cable
Uni-T
UNI-T 2-CH Digital Oscilloscope with 7-inch LCD Display Scopemeter with 100MHz Bandwidth 2 Channels 500MS/S Real Time Sample Rate 64kpts Depth Storage US Plug
UNI-T UT12E AC Voltage Detector Meter 24V-1000V Non-Contact Portable Tester Pen Socket Volt Current Electric Test Pencil with Sound and Light Alarm and LED Flashlight Vibration
UT12E and UT12M are UNI-T & #39; s professional grade voltage detectors. They are designed with IP67 dust/water resistant and can withstand 2-meter drop. These durable devices are great for working in harsh environments. UT12E has an extra vibration mode and UT12M is able to detect magnetic fields. Features: High AC voltage 90V~1000V and low AC voltage 24V~1000V dual testing modes, which is helpful for you to adjust sensitivity based on voltage. Able to distinguish neutral wire from live wire. UT12E has an extra vibration mode and UT12M is able to detect magnetic fields. Visual and audible alarm at the same time when voltage is detected, and meet CAT-IV 1000V standard to ensure maximum safety. Built-in flashlight makes it convenient to use at night or dark corner. Automatically turn off when no operation and no detection of AC voltage after 5 minutes. IP67 waterproof rating and can withstand 2-meter drop, suitable for working in harsh environments. Compact and portable design allows you to take anywhere anytime. Specifications: Material: ABS Model: UT12E / UT12M (Optional) AC voltage (Low): 24V~1000V AC voltage (High): 90V~1000V Frequency range: 50/60Hz Auto power off: about 5 mins Low Battery Indication: 2.4V Drop Test: 2m Power supply: 2 * 1.5V AAA battery (NOT included) Safety Level: CAT IV 1000V IP Rating: IP67 Item Size: 160.5 * 21.5 * 25mm / 6.31 * 0.84 * 0.98 in Item Weight: 72g / 2.53 oz Package Weight: 85g / 2.99 oz Package Size: 22.5 * 10.2 * 2.5 cm / 8.85 * 4.01 * 0.98 in Packing List: 1 * Voltage Detector 1 * User Manual (English)
Uni-T
UNI-T UT12E AC Voltage Detector Meter 24V-1000V Non-Contact Portable Tester Pen Socket Volt Current Electric Test Pencil with Sound and Light Alarm and LED Flashlight Vibration
UNI-T Palm-sized Digital Multimeter AC/DC True-RMS Multimeter 4mF(4000uF) Large Capacitance Meter Auto-ranging Multi Tester with Resistance Capacitance Diode Continuity NCV Live Wire Tests
Features: Measures AC/DC voltage, AC/DC current, resistance, capacitance, diode, continuity, NCV, and live wire test. NCV sensor and live wire tester send out audible and visual alarm once AC voltage detected. Supports 4mF (4000uF) large capacitance measurement. Offers you with auto-ranging and manual ranging mode for extremely simple and effective using experience. Large EBTN display with backlight enables you to view readings clearly even in the dim light. Long battery life, the meter can last up to 40 hours, no need to frequently recharging it. Auto power off within 15 minutes if there is no operation, helps conserve the battery. Provides with overvoltage and overcurrent protections, safe and reliable to use under 600 volts (30kVA). More Functions - Low battery indicator and data hold. Note: *Batteries not included. Parameters: Range Resolution Accuracy DC Voltage 4.000V 0.001V ( 0.5 %+3) 40.00V 0.01V 400.0V 0.1V 600V 1V AC Voltage 4.000V 0.001V ( 1.0 %+5) 40.00V 0.01V ( 0.8 %+3) 400.0V 0.1V 600V 1V AC Current 999.9 mA 0.1 mA ( 1.2 %+3) 9.999A 0.001A DC Current 999.9 mA 0.1 mA ( 1.0 %+3) 9.999A 0.001A Resistance 400.0 O 0.1 O ( 0.8 %+2) 4.000 kO 0.001 kO 40.00 kO 0.01 O 400.0 kO 0.1 kO 4.000M O 0.001M O ( 1.5 %+3) 40.00M O 0.01M O ( 2.0 %+5) Capacitance 40.00 nF 0.01 nF (4%+10) 400.0 nF~ 400.0 µF 0.1 nF~ 0.1 µF (4%+5) 4000µF 1µF 10% Diode Continuity NCV Live/null line Auto-range Low voltage indicator Auto-off Specifications: Brand: UNI-T Material: ABS Color: Red Display: 4099 counts Safety Level: CAT III. 600V Battery Type: 1.5V, AAA Battery, 2pcs (not included) Item Size: 13* 6.5 * 2.7 cm / 5.11 * 2.55 * 1.06 in Item Weight: 126g / 4.44 oz Package Size: 14.5 * 10.5 * 4.3 cm / 5.7 * 4.13 * 1.69 in Package Weight: 215g / 7.58 oz Packing List: 1 * Multimeter 2 * Test Lead 1 * User Manual (English)
Uni-T
UNI-T Palm-sized Digital Multimeter AC/DC True-RMS Multimeter 4mF(4000uF) Large Capacitance Meter Auto-ranging Multi Tester with Resistance Capacitance Diode Continuity NCV Live Wire Tests
UNI-T UT89X Digital Multimeter High Accuracy Handheld Mini Universal Meter 6000 Counts LCD Display True RMS Measure AC/DC Voltage Current Resistance Capacitance Frequency Temperature Diode Tester with
Features: Reliable Quality: the case was adopted with double color mould technology, which is more crash resistant and anti-shock than single color one, and comfort hand-held feeling. 2.8 Large LCD Display: 62*36mm LCD screen with large digital-readout and backlight for clear reading, and the flashlight for conveniently operating in dark environments. Practical Functions: for measuring DC/AC voltage, DC/AC current, Resistance, Capacitance, Frequency Duty ratio, Diode Triode, Live wire, and Temperature. Temperature Range: testing range is -40~1000C/-40~1832F, C / F unit conversion. Low Battery Indicator: remind you to replace battery to ensure measurement accuracy. NCV Measurement: adopting sectional measurement of the voltage and the smallest testing voltage is AC 15V/50Hz. Auto Power-off: 15mins automatic shutdown if there & #39; s no operation to save power. Wide Measuring Range: true RMS measuring up to 1, 000V voltage, 20A current, and fast capacitance measurement of 100mF. Audio Visual Alarm: buzzer and flashlight alarm in measuring voltage/current/diode/triode/NCV/LIVE. Specifications: Model Number: UT89X Material: ABS+PC Display Type: Digital display Max. Display: 6000 Range Control: Auto/Manual range Safety Level: CAT II 1000V, CAT III 600V Operating Temperature: 0~40? (32~104?) Storage Temperature: -20~60? (-4~140?) Relative Humidity: 0~30?: 75%RH, 30-40?: 50%RH Operating Altitude: 0~2000m DC Voltage Range: 600mV / 6V / 60V / 600V / 1000V AC Voltage Range: 6V / 60V / 600V / 1000V DC Current Range: 60µA / 6mA / 60mA / 600mA / 20A AC Current Range: 60mA / 600mA / 20A Resistance Range: 600O / 6KO / 60KO / 600KO / 6MO / 60MO Capacitance Range: 6nF / 60nF / 600nF / 6µF / 60µF / 600µF / 6mF / 60mF / 100mF Frequency Range: 9.999H z~10MHZ Duty Ratio Range: 0.1 %~ 99.9 % Temperature Range: -40~1000C / -40~1832F Power Supply: 4 * 1.5V AAA battery (NOT included) Screen Size: 62 * 36mm / 2.44 * 1.42 in Item Size: 186 * 87 * 52mm / 7.32 * 3.42 * 2.05 in Item Weight: 405g / 14.30 oz Package Weight: 524g / 18.50 oz Package Size: 26 * 16 * 5.7 cm / 10.24 * 6.30 * 2.64 in Package List: 1 * Digital Multimeter 1 * Pair of Test Leads 1 * Thermocouple Sensor Probe 1 * User Manual (English)
Uni-T
UNI-T UT89X Digital Multimeter High Accuracy Handheld Mini Universal Meter 6000 Counts LCD Display True RMS Measure AC/DC Voltage Current Resistance Capacitance Frequency Temperature Diode Tester with
UNI-T Handheld LCR Meter 10kHz 0.1% High Accuracy Lab Grade LCR Meter Tester with Inductance Capacitance Resistance ESR Impedance Angle Phase Dissipation/Quality Factor Tests for Electric Components
Features: Precision LCR Meter - Up to 0.1 % high accuracy measurements, the unit mainly measures inductance (L), capacitance (C), resistance (R) of components, also measures impedance (Z), dissipation factor (D), quality factor (Q), angle phase (?), and ESR. Accurate Measurement - Selectable 4 test frequencies of 100Hz, 120Hz, 1kHz, and 10kHz. Selectable 3 test levels of 0.1V, 0.3V, and 1V. Selectable tolerance of 1%, 5%, 10%, and 20%. Able to select parallel or series increasing accuracy of in-circuit testing. Auto-off in 5min, 15min (default), 30min, or 60min are selectable. 3 Measurement Speeds - Slow (2 times per second), medium (5 times per seconds) and fast (20 times per second). Tolerance Comparison - Equipped with audible/visual alarm, and counter features for tolerance fail/pass test. Data Logger - The average, maximum, minimum value can be recorded via data logging mode. Zeroing - Open/short zeroing eliminates connection errors, deliver more accurate measurement each times. USB to PC - Transfer data to the PC/Laptop through a USB port, and exports to image file(jpg. ), Excel and PDF report is available. Portable - High resolution LCD with 5 digit display, lighweight, portable, and battery operated. Applied in the product development, incoming inspections, or prodution line testing. Note: Dissipation (D) factors, Quality (Q) factors, Impedance (Z), Phase Angle (?), Equivalent Series Resistance (ESR). Parameters: Auto-ranging: yes Maximum Reading: 99999 Minimum Resolution: 0.0001 Test Frequency: 100Hz, 120Hz, 1kHz, 10kHz Test Level: 0.1V rms, 0.3V rms, 1Vrms Output Impedance: 100O Primary: L/C/R/Z Secondary: D/Q/?/ESR Automatic LCR: YES Test Terminal Configuration: 2/4/5 terminals Test Speed: Fast - 20, medium - 5, slow - 2 (times/sec) Auto-ranging: YES Tolerance Comparison Mode: 1%, 5%, 10%, 20% (selectable) Equivalent Way: Series, Parallel Correction Function: Open/Short Test Terminal Fuse: 0.1A /250V Port: Mini-USB Tolerance Pass/Fail LED prompt: Yes (green LED: PASS, red LED: FAIL) Maximum Reading: 99999 Minimum Resolution: 0.0001 ERR: 0.0000 O- 999.99 O D: 0.0000 - 9.9999 Q: 0.0000 -99999 ?: - 179.9 - 179.9 Resistance/Impedance: 0.0000 O- 9.9999M O Capacitance: 0pF- 99.999 mF (100 Hz/120 Hz); 0.0 pF- 9.9999 mF (1 kHz); 0.00 pF- 999.99 uF (10 kHz) Inductance: 0uH- 99.999H (100 Hz/120 Hz); 0.0 uH- 99.999H (1 kHz); 0.00 uH- 9.9999H (10 kHz) Specifications: Brand: UNI-T Material: ABS Color: Red Plug Type: US Display: 2.8 -inch TFT, 320*240 Battery: 3.7V, 1800mAh, lithium polymer battery Work Time: about 8 hours Auto Power Off: 5/15/30/60 minutes (self defined) Item Size: 19.2 * 9.3 * 4.4 cm / 7.55 * 3.66 * 1.73 in Item Weight: 346g / 12.2 oz Package Size: 22.8 *22* 6.3 cm / 8.97 * 8.66 * 2.48 in Package Weight: 626g / 22.08 oz Packing List: 1 * LCR Meter 2 * Alligator Clip 1 * Charging Cable 1 * Power Adapter 1 * Short Circuit Plate 1 * Software Disk 1 * User Manual (English)
Uni-T
UNI-T Handheld LCR Meter 10kHz 0.1% High Accuracy Lab Grade LCR Meter Tester with Inductance Capacitance Resistance ESR Impedance Angle Phase Dissipation/Quality Factor Tests for Electric Components
UNI-T UT890C Digital Multimeter True RMS Handheld Mini Universal Meter AC DC Voltmeter Ammeter High Accuracy Measure AC/DC Voltage Current Resistance Capacitance Frequency Temperature Diode Tester
Features: Practical Functions: for measuring DC/AC voltage, DC/AC current, Resistance, Capacitance, Frequency, hFE, Continuity test, Diode test, NCV test, and Temperature test. Temperature Range: testing range is -40~1000C/-40~1832F, C / F unit conversion. 2.6 Large LCD Display: 58*34mm LCD screen with large digital-readout and backlight for clear reading in dark environments. Auto Power-off: 15mins automatic shutdown if there & #39; s no operation to save power. Low Battery Indicator: remind you to replace battery to ensure measurement accuracy. Audio Visual Alarm: provide reliable and safe non-contact voltage testing, which is helpful for you to test voltage in an uncertain condition. Safety Protection: with overload protection and blown fuse indicator for safe operation, silicone case to protect the multimeter. Wide Measuring Range: true RMS measuring up to 1, 000V voltage, 20A current, and fast capacitance measurement of 100mF. Specifications: Model Number: UT890C Material: ABS+PC Display Type: Digital display Max. Display: 6000 Range Control: Manual range Safety Level: CAT II 1000V, CAT III 600V Operating Temperature: 0~40? (32~104?) Storage Temperature: -10~50? (14~122?) Relative Humidity: 0~30?: 75%RH, 30-40?: 50%RH Operating Altitude: 0~2000m DC Voltage Range: 600mV / 6V / 60V / 600V / 1000V AC Voltage Range: 6V / 60V / 600V / 750V DC Current Range: 60µA / 600µA / 6mA / 60mA / 600mA / 20A AC Current Range: 60µA / 600µA / 6mA / 60mA / 600mA / 20A Resistance Range: 600O / 6KO / 60KO / 600KO / 6MO / 60MO Capacitance Range: 6nF / 60nF / 600nF / 6µF / 60µF / 600µF / 6mF / 60mF / 100mF Frequency Range: 9.999H z~ 9.999MHZ Temperature Range: -40~1000C / -40~1832F Power Supply: 2 * 1.5V AAA battery (Not included) Screen Size: 58 * 34mm / 2.28 * 1.34 in Item Size: 183 * 88 * 56mm / 7.20 * 3.46 * 2.20 in Item Weight: 413g / 14.57 oz Package Weight: 527g / 18.59 oz Package Size: 26 * 16 * 5.7 cm / 10.24 * 6.30 * 2.64 in Package List: 1 * Digital Multimeter 1 * Pair of Test Leads 1 * Thermocouple Sensor Probe 1 * User Manual (English)
Uni-T
UNI-T UT890C Digital Multimeter True RMS Handheld Mini Universal Meter AC DC Voltmeter Ammeter High Accuracy Measure AC/DC Voltage Current Resistance Capacitance Frequency Temperature Diode Tester
UNI-T Palm-sized Digital Multimeter AC/DC True-RMS Multimeter 4mF(4000uF) Large Capacitance Meter Auto-ranging Multi Tester with Resistance Capacitance Diode Continuity NCV Live Wire Tests
Features: Measures AC/DC voltage, AC/DC current, resistance, capacitance, diode, continuity, NCV, and live wire test. NCV sensor and live wire tester send out audible and visual alarm once AC voltage detected. Supports 4mF (4000uF) large capacitance measurement. Offers you with auto-ranging and manual ranging mode for extremely simple and effective using experience. Large EBTN display with backlight enables you to view readings clearly even in the dim light. Long battery life, the meter can last up to 40 hours, no need to frequently recharging it. Auto power off within 15 minutes if there is no operation, helps conserve the battery. Provides with overvoltage and overcurrent protections, safe and reliable to use under 600 volts (30kVA). More Functions - Low battery indicator and data hold. Note: *Batteries not included. Parameters: Range Resolution Accuracy DC Voltage 4.000V 0.001V ( 0.5 %+3) 40.00V 0.01V 400.0V 0.1V 600V 1V AC Voltage 4.000V 0.001V ( 1.0 %+5) 40.00V 0.01V ( 0.8 %+3) 400.0V 0.1V 600V 1V AC Current 999.9 mA 0.1 mA ( 1.2 %+3) 9.999A 0.001A DC Current 999.9 mA 0.1 mA ( 1.0 %+3) 9.999A 0.001A Resistance 400.0 O 0.1 O ( 0.8 %+2) 4.000 kO 0.001 kO 40.00 kO 0.01 O 400.0 kO 0.1 kO 4.000M O 0.001M O ( 1.5 %+3) 40.00M O 0.01M O ( 2.0 %+5) Capacitance 40.00 nF 0.01 nF (4%+10) 400.0 nF~ 400.0 µF 0.1 nF~ 0.1 µF (4%+5) 4000µF 1µF 10% Diode Continuity NCV Live/null line Auto-range Low voltage indicator Auto-off Specifications: Brand: UNI-T Material: ABS Color: Red Display: 4099 counts Safety Level: CAT III. 600V Battery Type: 1.5V, AAA Battery, 2pcs (not included) Item Size: 13* 6.5 * 2.7 cm / 5.11 * 2.55 * 1.06 in Item Weight: 126g / 4.44 oz Package Size: 14.5 * 10.5 * 4.3 cm / 5.7 * 4.13 * 1.69 in Package Weight: 215g / 7.58 oz Packing List: 1 * Multimeter 2 * Test Lead 1 * User Manual (English)
Uni-T
UNI-T Palm-sized Digital Multimeter AC/DC True-RMS Multimeter 4mF(4000uF) Large Capacitance Meter Auto-ranging Multi Tester with Resistance Capacitance Diode Continuity NCV Live Wire Tests
UNI-T UT210E Mini Digital Handheld Clamp Multimeter Backlight LCD True RMS Voltmeter Ammeter Ohmmeter AC/DC Voltage Current Capacitance Resistance NCV Continuity Test Diode Tester with Storage Bag
This digital clamp meter features high reliability, safety, precision and compact design. Its resolution ratio is 1mA. Maximum range has maximum rage of 100A AC/DC; particular VFC start mode. Entering this mode can accurately measure voltage and current which has VFC frequency conversion. Voltage or current response display is true valid value. Whole range overload protection, reliable measurement accuracy and unique appearance design makes it an outstanding new generation functional electrician/electric power measurement instrument. Features: Multi-purpose clamp meter can measure AC/DC voltage, AC/DC current, NCV noncontact electric field, capacitance, diode, resistance and circuit on-off. Whole range overload protection, reliable measurement accuracy. Backlight LCD with maximum 2000 counts diaplay. Data hold, auto range, automatic power-off low battery prompt functions. Mini size, portable for field, laboratory, shop, home and many other applications. Specifications: Model: UT210E DC Voltage Range: 200mV/2V/20V200V/600V DC Voltage Resolution: 0.1 mV/1mV/10mV/100mV/1V AC Voltage Range: 2V/20V/200V/600V AC Voltage Resolution: 1mV/10mV/100mV/1V Resistance Range: 200O/2KO/20KO/200KO/2MO/20MO Resistance Resolution: 0.1 O/1O/10O/100O/1KO/10KO Circuit Resolution: 0.1 O Diode Resolution: 1mV Capacitance Range: 2nF/20nF~200µF/2mF~20mF Capacitance Resolution: 1pF/10pF~100nF/1µF~10µF DCA Range: 2A/20A/100A DCA Resolution: 1mA/10mA/100mA ACA Range: 2A/20A/100A ACA Resolution: 1mA/10mA/100mA General Characteristic: Maximum Overload Protection for Clamp Head Terminal: 100A Maximum Display: 2000 counts, update 2~3 times per second Diode: approx. 3.2V Range: automatic (exclusive of electricity gear) Polarity: automatic Work Temperature: 0C~40C Relative Humidity: 0C~30C: 75%, 30C~40C: 50% Storage Temperature: -10C~50C Work Altitude: 0~2000m Battery: 2 * 1.5V AAA batteries (not included) Product Size: 175mm * 60mm * 33.5 mm Product Net Weight: 170g / 6oz LCD Size: 39.3 mm * 21.5 mm Maximum Clamp Head Size: 17mm Package Size: 18.6 * 7.2 * 5.9 cm / 7.3 * 2.8 * 2.3 in Package Weight: 311g / 11oz Package List: 1 * Multimeter 1 * Pair of Test Probe 1 * Storage Bag 1 * User Manual (English)
Uni-T
UNI-T UT210E Mini Digital Handheld Clamp Multimeter Backlight LCD True RMS Voltmeter Ammeter Ohmmeter AC/DC Voltage Current Capacitance Resistance NCV Continuity Test Diode Tester with Storage Bag
UNI-T UT890D+ Digital Multimeter True RMS Handheld Mini Universal Meter AC DC Voltmeter Ammeter High Accuracy Measure AC/DC Voltage Current Resistance Capacitance Frequency Diode Tester Fire Wire
Features: Practical Functions: for measuring DC/AC voltage, DC/AC current, Resistance, Capacitance, Frequency, hFE, Continuity test, Diode test, NCV test, and Fire wire detection. Fire Wire Detection: fire wire identification with single test lead operation, buzzer and red light flashing to alarm you when detecting fire wire. 2.6 Large LCD Display: 58*34mm LCD screen with large digital-readout and backlight for clear reading in dark environments. Auto Power-off: 15mins automatic shutdown if there & #39; s no operation to save power. Low Battery Indicator: remind you to replace battery to ensure measurement accuracy. Audio Visual Alarm: provide reliable and safe non-contact voltage testing, which is helpful for you to test voltage in an uncertain condition. Safety Protection: with overload protection and blown fuse indicator for safe operation, silicone case to protect the multimeter. Wide Measuring Range: true RMS measuring up to 1, 000V voltage, 20A current, and fast capacitance measurement of 100mF. Specifications: Model Number: UT890D+ Material: ABS+PC Display Type: Digital display Max. Display: 6000 Range Control: Manual range Safety Level: CAT II 1000V, CAT III 600V Operating Temperature: 0~40? (32~104?) Storage Temperature: -10~50? (14~122?) Relative Humidity: 0~30?: 75%RH, 30-40?: 50%RH Operating Altitude: 0~2000m DC Voltage Range: 600mV / 6V / 60V / 600V / 1000V AC Voltage Range: 6V / 60V / 600V / 750V DC Current Range: 60µA / 600µA / 6mA / 60mA / 600mA / 20A AC Current Range: 60µA / 600µA / 6mA / 60mA / 600mA / 20A Resistance Range: 600O / 6KO / 60KO / 600KO / 6MO / 60MO Capacitance Range: 6nF / 60nF / 600nF / 6µF / 60µF / 600µF / 6mF / 60mF / 100mF Frequency Range: 9.999H z~ 9.999MHZ Power Supply: 2 * 1.5V AAA battery (Not included) Screen Size: 58 * 34mm / 2.28 * 1.34 in Item Size: 183 * 88 * 56mm / 7.20 * 3.46 * 2.20 in Item Weight: 402g / 14.18 oz Package Weight: 514g / 18.13 oz Package Size: 26 * 16 * 5.7 cm / 10.24 * 6.30 * 2.64 in Package List: 1 * Digital Multimeter 1 * Pair of Test Leads 1 * User Manual (English)
Uni-T
UNI-T UT890D+ Digital Multimeter True RMS Handheld Mini Universal Meter AC DC Voltmeter Ammeter High Accuracy Measure AC/DC Voltage Current Resistance Capacitance Frequency Diode Tester Fire Wire
UNI-T UT89XD Digital Multimeter High Accuracy Handheld Mini Universal Meter 6000 Counts LCD Display True RMS Measure AC/DC Voltage Current Resistance Capacitance LED Test Frequency Diode Tester with
Features: Practical Functions: for measuring DC/AC voltage, DC/AC current, Resistance, Capacitance, Frequency Duty ratio, Diode Triode, Live wire, and LED test. LED Test: function for checking LED performance, also with 12V/5mA voltage output. Reliable Quality: the case was adopted with double color mould technology, which is more crash resistant and anti-shock than single color one, and comfort hand-held feeling. 2.8 Large LCD Display: 62*36mm LCD screen with large digital-readout and backlight for clear reading, and the flashlight for conveniently operating in dark environments. Low Battery Indicator: remind you to replace battery to ensure measurement accuracy. Auto Power-off: 15mins automatic shutdown if there & #39; s no operation to save power. Wide Measuring Range: true RMS measuring up to 1, 000V voltage, 20A current, and fast capacitance measurement of 100mF. Audio Visual Alarm: buzzer and flashlight alarm in measuring voltage/current/diode/triode/Live. Specifications: Model Number: UT89XD Material: ABS+PC Display Type: Digital display Max. Display: 6000 Range Control: Auto/Manual range Safety Level: CAT II 1000V, CAT III 600V Operating Temperature: 0~40? (32~104?) Storage Temperature: -20~60? (-4~140?) Relative Humidity: 0~30?: 75%RH, 30-40?: 50%RH Operating Altitude: 0~2000m DC Voltage Range: 600mV / 6V / 60V / 600V / 1000V AC Voltage Range: 6V / 60V / 600V / 1000V DC Current Range: 60µA / 6mA / 60mA / 600mA / 20A AC Current Range: 60mA / 600mA / 20A Resistance Range: 600O / 6KO / 60KO / 600KO / 6MO / 60MO Capacitance Range: 6nF / 60nF / 600nF / 6µF / 60µF / 600µF / 6mF / 60mF / 100mF Frequency Range: 9.999H z~10MHZ Duty Ratio Range: 0.1 %~ 99.9 % LED Range: 11.1V Power Supply: 4 * 1.5V AAA battery (NOT included) Screen Size: 62 * 36mm / 2.44 * 1.42 in Item Size: 186 * 87 * 52mm / 7.32 * 3.42 * 2.05 in Item Weight: 396g / 13.98 oz Package Weight: 515g / 18.19 oz Package Size: 26 * 16 * 5.7 cm / 10.24 * 6.30 * 2.64 in Package List: 1 * Digital Multimeter 1 * Pair of Test Leads 1 * User Manual (English)
Uni-T
UNI-T UT89XD Digital Multimeter High Accuracy Handheld Mini Universal Meter 6000 Counts LCD Display True RMS Measure AC/DC Voltage Current Resistance Capacitance LED Test Frequency Diode Tester with
UNI-T UT202A+ 6000 Counts Digital Clamp Meter True RMS Multimeter Clamp Ammeter Voltage Meter NCV Test Universal Meter Tester AC Current Clamp Tester Measuring Relative Value Capacitance Frequency
Features: Multifunctional Clamp Meter: can be used to measure AC current, AC/DC voltage, resistance, capacitance, relative value, Max/Min value, frequency/duty cycle, LIVE test, continuity test, and diode test. Measuring Range: 600A AC current, 600V AC/DC voltage, 60MO resistance, 60mF capacitance, 10Hz~10MHz frequency, and -40~1000? temperature. Data Hold: hold the measured data for conveniently checking or observing data. Backlight Function: 1.6 -inch LCD screen with backlight ON/OFF switchable for display data clearly. 28mm Jaw Opening: jaw opening of 28mm to measure current without touching or interrupting the circuit. Accessories: comes with a pair of test probes for convenient measurement, and a black zipper pouch for storing the clamp meter. Power Supply: powered by 2* 1.5V AAA battery (NOT included), convenient to operate. Reliable Functional: with good reliability and high precision, really practical for electrical equipment testing and maintenance. Specifications: Material: ABS Safety Rating: CAT II 600V, CAT III 300V Display Count: Max. 6000 Jaw Opening: 28mm Auto off: 15 minutes Range: Auto AC Current Range: 6.000A / 60.00A / 600.0A AC Current Resolution: 0.001A / 0.01A / 0.1A AC Current Frequency: 50Hz~100Hz AC Current Frequency Resolution: 0.1H z AC Voltage Range: 6.000V / 60.00V / 600.0V AC Voltage Resolution: 0.001V / 0.01V / 0.1V AC Voltage Frequency: 10Hz~10kHz AC Voltage Frequency Resolution: 0.01H z~ 0.01 kHz DC Voltage Range: 600.0 mV/ 6.000V / 60.00V / 600.0V DC Voltage Resolution: 0.1 mV/ 0.001V / 0.01V / 0.1V Resistance Range: 600.0 O/ 6.000 kO/ 60.00 kO/ 600.0 kO/ 6.000M O/ 60.00M O Resistance Resolution: 0.1 O/ 0.001 kO/ 0.01 kO/ 0.1 kO/ 0.001M O/ 0.01M O Capacitance Range: 6.000 nF/ 60.00 nF/ 600.0 nF/ 6.000 uF/ 60.00 uF/ 600.0 uF/ 6.000 mF/ 60.00 mF Capacitance Resolution: 0.001 nF/ 0.01 nF/ 0.1 nF/ 0.001 uF/ 0.01 uF/ 0.1 uF/ 0.001 mF/ 0.01 mF Frequency Range: 10Hz~10MHz Frequency Resolution: 0.01H z~ 0.01MH z Duty Cycle Range: 0.1 %~ 99.9 % Duty Cycle Resolution: 0.1 % Continuity Range: 600.0 O Continuity Resolution: 0.1 O Diode Range: 6.000V Diode Resolution: 0.001V Operating Temperature: 0~30?(humidity 80%RH), 30~40?(humidity 75%RH), 40~50?(humidity 45%RH) Storage Temperature Humidity: -20~60?, 80%RH Altitude: 2, 000 meters Power Supply: 2 * 1.5V AAA battery (NOT included) Item Size: 215 * 63.5 * 36mm / 8.46 * 2.5 * 1.41 in Item Weight: 283g / 10.01 oz Package Weight: 377g / 13.30 oz Package Size: 23.5 * 9.2 * 5.3 cm / 9.25 * 3.62 * 2.09 in Package List: 1 * Clamp Meter 2 * Test Lead 1 * Storage Bag 1 * Manual (English)
Uni-T
UNI-T UT202A+ 6000 Counts Digital Clamp Meter True RMS Multimeter Clamp Ammeter Voltage Meter NCV Test Universal Meter Tester AC Current Clamp Tester Measuring Relative Value Capacitance Frequency
UNI-T UT89XE 2.8-inch LCD Digital Multimeter 20000 Counts True RMS Portable High Precision Universal Tester Voltmeter Ammeter LPF Ohm Volt Amp and Diode & Continuity Temperature Tester 1000V Voltage
The 20000-count true RMS digital multimeter has high accuracy and high resolution. Aside from normal features of multimeters, this meter also includes conductance measurement (range: 0.1 nS~200nS; converted resistance: 5MO~10GO), which expands the range of resistance measurement and enables high resistance measurement. Designed according to CAT II 1000V/CAT III 600V safety rating, the meter comes with overvoltage/overcurrent alarm and full featured false detection protection for high voltages, which is the first choice for the commercial and industrial area. Features: Multiple Functions: including the measurement functions of DC/AC voltage, DC/AC current, resistance, capacitance, conductance, frequency, temperature, continuity diode test, and LPF measurement. Wide Measurement Range: 0.1 nS~200nS conductance measurement, 200MHz frequency measurement for sinusoidal/non-sinusoidal waves (such as crystal frequency), 1000V max. measurable AC/DC voltage, 20A max. measurable current, very large capacitance (200mF) measurement, etc. Safety Operation: full-featured false detection protection for up to 600V overvoltage surge, and overvoltage/overcurrent alarm. User-friendly Design: double injection molding case with high hardness that can bear from dropping from 1 meters hight. Clearly Measured Data Checking: 2.8 -inch large LCD display with auto backlight for flexibly responding to various dark conditions. And the data hold function for writing the measurement value down with ease. LPF Measurement: low pass filter (LPF) to measure combined sine wave signals produced by inverters and variable frequency drives. Other Features: 20000-count display, true RMS measurement, and fast ADC (3 times/s), peak maximum/minimum capture, auto power off, audible visual alarm, etc. Specifications: AC Voltage Range: 200mV( 1.0 %+25), 2V/20V/200V( 0.8 %+25), 1000V( 1.2 %+25) AC Voltage Resolution: 0.01 mV/ 0.0001V / 0.001V / 0.01V /1V AC Voltage (LPF): 200V/1000V(2%+30) AC Voltage (LPF): 0.01V / 0.1V DC Voltage Range: 200mV/2V/20V/200V( 0.05 %+5), 1000V( 0.1 %+5) DC Voltage Resolution: 0.01 mV/ 0.0001V / 0.001V / 0.01V /1V AC Current Range: 2000uA/200mA( 1.5 %+15), 20A( 2.5 %+35) AC Current Resolution: 0.1 uA/ 0.01 mA/ 0.001A DC Current Range: 200uA/2000uA( 0.5 %+4), 200mA( 0.8 %+6), 20A(2%+15) DC Current Resolution: 0.01 uA/ 0.1 uA/ 0.01 mA/ 0.001A Resistance Range: 200O( 0.4 %+10), 2kO/20kO/200kO/2MO( 0.4 %+5), 20MO( 1.2 %+25), 200MO(5%+10) Resistance Resolution: 0.01 O/ 0.0001 kO/ 0.001 kO/ 0.01 kO/ 0.0001M O/ 0.001M O/ 0.1M Capacitance Range: 20nF/200nF/2000nF/2uF/20uF/200uF/2mF(4%+50), 20mF/200mF(10%) Capacitance Resolution: 0.001 nF/ 0.01 nF/ 0.1 nF/ 0.0001 uF/ 0.001 uF/ 0.01 uF/ 0.1 uF/ 0.001 mF/ 0.01 mF Frequency Range: 200Hz~60MHz( 0.1 %+3) Frequency Resolution: 0.01H z~ 0.01MH z Temperature Range: -40~40?4%, 40~400?(1%+5?), 400~1000?(2%+5?) -40~104?5?, 104~752?( 1.5 %+5?), 752~1832?( 2.5 %+5?) Temperature Resolution: 0.1 ?/? Conductance: 200nS( 1.2 %+50) Conductance Resolution: 0.01 nS Continuity Test: 200O Continuity Test Resolution: 0.01 O Diode Test: 20V Diode Test Resolution: 0.001V Material: ABS Range: Manual range Display Count: 20000 Sampling Rate: 3 times/s MAX/MIN: Peak Hold: LPF Measurement: Safety Ratings: CAT II 1000V, CAT III 600V Power Supply: 4 * 1.5V AAA battery (NOT included) Item Size: 189.4 * 89 * 53.8 mm / 7.46 * 3.50 * 2.12 in Item Weight: 413g / 14.56 oz Package Weight: 515g / 18.17 oz Package Size: 21.5 * 16 * 6cm / 8.46 * 6.30 * 2.36 in Packing List: 1 * Multimeter 1 * Pair of Test Lead 1 * K-type Temperature Probe
Uni-T
UNI-T UT89XE 2.8-inch LCD Digital Multimeter 20000 Counts True RMS Portable High Precision Universal Tester Voltmeter Ammeter LPF Ohm Volt Amp and Diode & Continuity Temperature Tester 1000V Voltage
UNI-T UT202+ 4000 Counts Digital Clamp Meter True RMS Multimeter Clamp Ammeter Voltage Meter NCV Test Universal Meter Tester AC Current Clamp Tester -40~1000? Temperature Measurement Relative Value
Features: Multifunctional Clamp Meter: can be used to measure AC current, AC/DC voltage, resistance, capacitance, temperature, relative value, Max/Min value, continuity test, and diode test. Measuring Range: 400A AC current, 600V AC/DC voltage, 40MO resistance, 4mF capacitance, and -40~1000? temperature. Data Hold: hold the measured data for conveniently checking or observing data. Backlight Function: 1.6 -inch LCD screen with backlight ON/OFF switchable for display data clearly. 28mm Jaw Opening: jaw opening of 28mm to measure current without touching or interrupting the circuit. Accessories: comes with a pair of test probes for convenient measurement, and a black zipper pouch for storing the clamp meter. Power Supply: powered by 2* 1.5V AAA battery (NOT included), convenient to operate. Reliable Functional: with good reliability and high precision, really practical for electrical equipment testing and maintenance. Specifications: Material: ABS Safety Rating: CAT II 600V, CAT III 300V Display Count: Max. 4000 Jaw Opening: 28mm Auto off: 15 minutes Range: Auto AC Current Range: 4.000A / 40.00A / 400.0A AC Current Resolution: 0.001A / 0.01A / 0.1A AC Current Frequency: 50Hz~100Hz AC Current Frequency Resolution: 0.1H z AC Voltage Range: 4.000V / 40.00V / 400.0V /600V AC Voltage Resolution: 0.001V / 0.01V / 0.1V /1V AC Voltage Frequency: 10Hz~10kHz AC Voltage Frequency Resolution: 0.01H z~ 0.01 kHz DC Voltage Range: 400.0 mV/ 4.000V / 40.00V / 400.0V /600V DC Voltage Resolution: 0.1 mV/ 0.001V / 0.01V / 0.1V /1V Resistance Range: 400.0 O/ 4.000 kO/ 40.00 kO/ 400.0 kO/ 4.000M O/ 40.00M O Resistance Resolution: 0.1 O/ 0.001 kO/ 0.01 kO/ 0.1 kO/ 0.001M O/ 0.01M O Capacitance Range: 4.000 nF/ 40.00 nF/ 400.0 nF/ 4.000 uF/ 40.00 uF/ 400.0 uF/ 4.000 mF Capacitance Resolution: 0.001 nF/ 0.01 nF/ 0.1 nF/ 0.001 uF/ 0.01 uF/ 0.1 uF/ 0.001 mF Temperature Range: -40~40?/40~500?/500~1000? (-40~104?/104~932?/932~1832?) Temperature Resolution: 1?(1?) Continuity Range: 400.0 O Continuity Resolution: 0.1 O Diode Range: 4.000V Diode Resolution: 0.001V Operating Temperature: 0~30?(humidity 80%RH), 30~40?(humidity 75%RH), 40~50?(humidity 45%RH) Storage Temperature Humidity: -20~60?, 80%RH Altitude: 2, 000 meters Power Supply: 2 * 1.5V AAA battery (NOT included) Item Size: 215 * 63.5 * 36mm / 8.46 * 2.5 * 1.41 in Item Weight: 296g / 10.44 oz Package Weight: 386g / 13.62 oz Package Size: 23.5 * 9.2 * 5.3 cm / 9.25 * 3.62 * 2.09 in Package List: 1 * Clamp Meter 2 * Test Lead 1 * Temperature Probe 1 * Storage Bag 1 * Manual (English)
Uni-T
UNI-T UT202+ 4000 Counts Digital Clamp Meter True RMS Multimeter Clamp Ammeter Voltage Meter NCV Test Universal Meter Tester AC Current Clamp Tester -40~1000? Temperature Measurement Relative Value
UNI-T UT89XE 2.8-inch LCD Digital Multimeter 20000 Counts True RMS Portable High Precision Universal Tester Voltmeter Ammeter LPF Ohm Volt Amp and Diode & Continuity Temperature Tester 1000V Voltage
The 20000-count true RMS digital multimeter has high accuracy and high resolution. Aside from normal features of multimeters, this meter also includes conductance measurement (range: 0.1 nS~200nS; converted resistance: 5MO~10GO), which expands the range of resistance measurement and enables high resistance measurement. Designed according to CAT II 1000V/CAT III 600V safety rating, the meter comes with overvoltage/overcurrent alarm and full featured false detection protection for high voltages, which is the first choice for the commercial and industrial area. Features: Multiple Functions: including the measurement functions of DC/AC voltage, DC/AC current, resistance, capacitance, conductance, frequency, temperature, continuity diode test, and LPF measurement. Wide Measurement Range: 0.1 nS~200nS conductance measurement, 200MHz frequency measurement for sinusoidal/non-sinusoidal waves (such as crystal frequency), 1000V max. measurable AC/DC voltage, 20A max. measurable current, very large capacitance (200mF) measurement, etc. Safety Operation: full-featured false detection protection for up to 600V overvoltage surge, and overvoltage/overcurrent alarm. User-friendly Design: double injection molding case with high hardness that can bear from dropping from 1 meters hight. Clearly Measured Data Checking: 2.8 -inch large LCD display with auto backlight for flexibly responding to various dark conditions. And the data hold function for writing the measurement value down with ease. LPF Measurement: low pass filter (LPF) to measure combined sine wave signals produced by inverters and variable frequency drives. Other Features: 20000-count display, true RMS measurement, and fast ADC (3 times/s), peak maximum/minimum capture, auto power off, audible visual alarm, etc. Specifications: AC Voltage Range: 200mV( 1.0 %+25), 2V/20V/200V( 0.8 %+25), 1000V( 1.2 %+25) AC Voltage Resolution: 0.01 mV/ 0.0001V / 0.001V / 0.01V /1V AC Voltage (LPF): 200V/1000V(2%+30) AC Voltage (LPF): 0.01V / 0.1V DC Voltage Range: 200mV/2V/20V/200V( 0.05 %+5), 1000V( 0.1 %+5) DC Voltage Resolution: 0.01 mV/ 0.0001V / 0.001V / 0.01V /1V AC Current Range: 2000uA/200mA( 1.5 %+15), 20A( 2.5 %+35) AC Current Resolution: 0.1 uA/ 0.01 mA/ 0.001A DC Current Range: 200uA/2000uA( 0.5 %+4), 200mA( 0.8 %+6), 20A(2%+15) DC Current Resolution: 0.01 uA/ 0.1 uA/ 0.01 mA/ 0.001A Resistance Range: 200O( 0.4 %+10), 2kO/20kO/200kO/2MO( 0.4 %+5), 20MO( 1.2 %+25), 200MO(5%+10) Resistance Resolution: 0.01 O/ 0.0001 kO/ 0.001 kO/ 0.01 kO/ 0.0001M O/ 0.001M O/ 0.1M Capacitance Range: 20nF/200nF/2000nF/2uF/20uF/200uF/2mF(4%+50), 20mF/200mF(10%) Capacitance Resolution: 0.001 nF/ 0.01 nF/ 0.1 nF/ 0.0001 uF/ 0.001 uF/ 0.01 uF/ 0.1 uF/ 0.001 mF/ 0.01 mF Frequency Range: 200Hz~60MHz( 0.1 %+3) Frequency Resolution: 0.01H z~ 0.01MH z Temperature Range: -40~40?4%, 40~400?(1%+5?), 400~1000?(2%+5?) -40~104?5?, 104~752?( 1.5 %+5?), 752~1832?( 2.5 %+5?) Temperature Resolution: 0.1 ?/? Conductance: 200nS( 1.2 %+50) Conductance Resolution: 0.01 nS Continuity Test: 200O Continuity Test Resolution: 0.01 O Diode Test: 20V Diode Test Resolution: 0.001V Material: ABS Range: Manual range Display Count: 20000 Sampling Rate: 3 times/s MAX/MIN: Peak Hold: LPF Measurement: Safety Ratings: CAT II 1000V, CAT III 600V Power Supply: 4 * 1.5V AAA battery (NOT included) Item Size: 189.4 * 89 * 53.8 mm / 7.46 * 3.50 * 2.12 in Item Weight: 413g / 14.56 oz Package Weight: 515g / 18.17 oz Package Size: 21.5 * 16 * 6cm / 8.46 * 6.30 * 2.36 in Packing List: 1 * Multimeter 1 * Pair of Test Lead 1 * K-type Temperature Probe
Uni-T
UNI-T UT89XE 2.8-inch LCD Digital Multimeter 20000 Counts True RMS Portable High Precision Universal Tester Voltmeter Ammeter LPF Ohm Volt Amp and Diode & Continuity Temperature Tester 1000V Voltage
UNI-T UT202+ 4000 Counts Digital Clamp Meter True RMS Multimeter Clamp Ammeter Voltage Meter NCV Test Universal Meter Tester AC Current Clamp Tester -40~1000? Temperature Measurement Relative Value
Features: Multifunctional Clamp Meter: can be used to measure AC current, AC/DC voltage, resistance, capacitance, temperature, relative value, Max/Min value, continuity test, and diode test. Measuring Range: 400A AC current, 600V AC/DC voltage, 40MO resistance, 4mF capacitance, and -40~1000? temperature. Data Hold: hold the measured data for conveniently checking or observing data. Backlight Function: 1.6 -inch LCD screen with backlight ON/OFF switchable for display data clearly. 28mm Jaw Opening: jaw opening of 28mm to measure current without touching or interrupting the circuit. Accessories: comes with a pair of test probes for convenient measurement, and a black zipper pouch for storing the clamp meter. Power Supply: powered by 2* 1.5V AAA battery (NOT included), convenient to operate. Reliable Functional: with good reliability and high precision, really practical for electrical equipment testing and maintenance. Specifications: Material: ABS Safety Rating: CAT II 600V, CAT III 300V Display Count: Max. 4000 Jaw Opening: 28mm Auto off: 15 minutes Range: Auto AC Current Range: 4.000A / 40.00A / 400.0A AC Current Resolution: 0.001A / 0.01A / 0.1A AC Current Frequency: 50Hz~100Hz AC Current Frequency Resolution: 0.1H z AC Voltage Range: 4.000V / 40.00V / 400.0V /600V AC Voltage Resolution: 0.001V / 0.01V / 0.1V /1V AC Voltage Frequency: 10Hz~10kHz AC Voltage Frequency Resolution: 0.01H z~ 0.01 kHz DC Voltage Range: 400.0 mV/ 4.000V / 40.00V / 400.0V /600V DC Voltage Resolution: 0.1 mV/ 0.001V / 0.01V / 0.1V /1V Resistance Range: 400.0 O/ 4.000 kO/ 40.00 kO/ 400.0 kO/ 4.000M O/ 40.00M O Resistance Resolution: 0.1 O/ 0.001 kO/ 0.01 kO/ 0.1 kO/ 0.001M O/ 0.01M O Capacitance Range: 4.000 nF/ 40.00 nF/ 400.0 nF/ 4.000 uF/ 40.00 uF/ 400.0 uF/ 4.000 mF Capacitance Resolution: 0.001 nF/ 0.01 nF/ 0.1 nF/ 0.001 uF/ 0.01 uF/ 0.1 uF/ 0.001 mF Temperature Range: -40~40?/40~500?/500~1000? (-40~104?/104~932?/932~1832?) Temperature Resolution: 1?(1?) Continuity Range: 400.0 O Continuity Resolution: 0.1 O Diode Range: 4.000V Diode Resolution: 0.001V Operating Temperature: 0~30?(humidity 80%RH), 30~40?(humidity 75%RH), 40~50?(humidity 45%RH) Storage Temperature Humidity: -20~60?, 80%RH Altitude: 2, 000 meters Power Supply: 2 * 1.5V AAA battery (NOT included) Item Size: 215 * 63.5 * 36mm / 8.46 * 2.5 * 1.41 in Item Weight: 296g / 10.44 oz Package Weight: 386g / 13.62 oz Package Size: 23.5 * 9.2 * 5.3 cm / 9.25 * 3.62 * 2.09 in Package List: 1 * Clamp Meter 2 * Test Lead 1 * Temperature Probe 1 * Storage Bag 1 * Manual (English)
Uni-T
UNI-T UT202+ 4000 Counts Digital Clamp Meter True RMS Multimeter Clamp Ammeter Voltage Meter NCV Test Universal Meter Tester AC Current Clamp Tester -40~1000? Temperature Measurement Relative Value
UNI-T UTi260B -15? ~550? 2.8 Inch TFT LCD Display Screen Infrared Thermal Imager 49152(256 * 192) Thermal Imaging Pixel Surface Temperature Real Time Thermal Images Combination Infrared Visible Light
UTi260B is an infrared thermal imager that combines surface temperature measurements with real-time thermal images, which are clearly displayed on the screen by the thermal imager. Lens with infrared and visible light two kinds, -15 ?~550 ? temperature range, the thermal imaging is 256 x 192 pixels (49152) which are more likely to find out the abnormal temperature points. Take photo and store it on your Memorycard then you can use PC software for image analysis and processing to generate reports, and equipped with PC software real time screen projection function, with IP65 protect level, come on and try it, it will not let you down. Features: Combination of surface temperature measurements with real time thermal images, which are clearly displayed on the screen by the thermal imager, so you can see the data more clearly. The built-in brightness lights and using a new typeof sensor module in place to ensure thatfine infrared resolution and rich color plate model, can deal with a variety of imagingmode. Take pictures and store them to the Memorycard, you can use PC software to analyze and process the pictures to generate reports, and have the real-time screen projection function of PC software. With 2.8 inch TFT LCD display screen, so you can see the pictures and data more clearly, give you the better using experience. In addition to the central point, you can also customized three temperature measurement points: temperature measurement at the central point, high and low temperature tracking and criticalarea temperature measurement (ROI). It has the function of LED light supplementary and alarm functions. It is widely used in electrical equipment maintenance and overhaul, HVAC pipeline testing, electronic industry, photovoltaic industry equipment and vehicle testing and so on. Specifications: Material: ABS Temperature measuring range: -15?~550? (5?~1022?) Resolution ratio: 0.1 ? Accuracy: 2?/2%(using the big value) Temperature response time: 500ms Thermal imaging pixel: 49152 (256*192) Pixel size: 12um Color palette: iron red, rainbow, white hot, black hot, red hot, lava, high contrast rainbow Infrared spectral bandwidth: 8-14um View Angle (FOV): 56 (H) * 42 (V) Instantaneous field of view (IFOV): 3.8 mrad Thermal imaging sensitivity: 60mk Frame rate: 25Hz Picture format: BMP Image model: thermal imaging, digital camera (visible light), fusion, painting in painting Visible light resolution: 640*480 Mixed set: 0% (full visible light), 25%, 50%, 75%, 100% (full thermal imaging) Recharging time: no exceed 5 hours Recharging voltage: 5V Recharging current: 2A Storage temperature: -20?~60?(-4?~140?) Storage humidity: 85%RH (no condensation) Working temperature: 0?~50?(32?~122?) IP level: IP65 Altitude: 2000 meters Battery: 1 * 26650 battery (included) Item size: 237 * 92 * 75mm / 9.3 * 3.6 * 3.0 in Item weight: 520g / 1.1 lb Package size: 250 * 100 * 95mm / 9.8 * 3.9 * 3.7 in Package weight: 1000g / 2.2 lb Packing list: 1 * Infrared Thermal Imager 1 * User Manual 1 * Type-C USB Cable 1 * MemoryCard
Uni-T
UNI-T UTi260B -15? ~550? 2.8 Inch TFT LCD Display Screen Infrared Thermal Imager 49152(256 * 192) Thermal Imaging Pixel Surface Temperature Real Time Thermal Images Combination Infrared Visible Light
UNI-T UT204+ 6000 Counts Digital Clamp Meter True RMS Multimeter Clamp Ammeter Voltage Meter NCV Test Universal Meter Tester AC/DC Current Clamp Tester -40~1000? Temperature Measurement LIVE Test
Features: Multifunctional Clamp Meter: can be used to measure AC/DC current, AC/DC voltage, resistance, capacitance, frequency, duty cycle, relative value, Max/Min value, temperature, LIVE test, continuity test, and diode test. Measuring Range: 600A AC/DC current, 600V AC/DC voltage, 60MO resistance, 60mF capacitance, 10Hz~10MHz frequency, 0.1 %~99% duty cycle, and -40~1000? temperature. Data Hold: hold the measured data for conveniently checking or observing data. Backlight Function: 1.6 -inch LCD screen with backlight ON/OFF switchable for display data clearly. 28mm Jaw Opening: jaw opening of 28mm to measure current without touching or interrupting the circuit. Accessories: comes with a pair of test probes for convenient measurement, and a black zipper pouch for storing the clamp meter. Power Supply: powered by 2* 1.5V AAA battery (NOT included), convenient to operate. Reliable Functional: with good reliability and high precision, really practical for electrical equipment testing and maintenance. Specifications: Material: ABS Safety Rating: CAT II 600V, CAT III 300V Display Count: Max. 6000 Jaw Opening: 28mm Auto off: 15 minutes Range: Auto AC Current Range: 60.00A / 600.0A AC Current Resolution: 0.01A / 0.1A DC Current Range: 60.00A / 600.0A DC Current Resolution: 0.01A / 0.1A AC Voltage Range: 6.000V / 60.00V / 600.0V AC Voltage Resolution: 0.001V / 0.01V / 0.1V AC Voltage Frequency: 10Hz~60kHz AC Voltage Frequency Resolution: 0.01H z~ 0.01 kHz DC Voltage Range: 600.0 mV/ 6.000V / 60.00V / 600.0V DC Voltage Resolution: 0.1 mV/ 0.001V / 0.01V / 0.1V Resistance Range: 600.0 O/ 6.000 kO/ 60.00 kO/ 600.0 kO/ 6.000M O/ 60.00M O Resistance Resolution: 0.1 O/ 0.001 kO/ 0.01 kO/ 0.1 kO/ 0.001M O/ 0.01M O Capacitance Range: 60.00 nF/ 600.0 nF/ 6.000 uF/ 60.00 uF/ 600.0 uF/ 6.000 mF/ 60.00 mF Capacitance Resolution: 0.01 nF/ 0.1 nF/ 0.001 uF/ 0.01 uF/ 0.1 uF/ 0.001 mF/ 0.01 mF Temperature Range: -40~40?/40~500?/500~1000? (-40~104?/104~932?/932~1832?) Temperature Resolution: 1?(1?) Frequency Range: 10Hz~10MHz Frequency Resolution: 0.01H z~ 0.01MH z Duty Cycle Range: 0.1 %~99% Duty Cycle Resolution: 0.1 % Continuity Range: 600.0 O Continuity Resolution: 0.1 O Diode Range: 6.000V Diode Resolution: 0.001V Operating Temperature: 0~30?(humidity 80%RH), 30~40?(humidity 75%RH), 40~50?(humidity 45%RH) Storage Temperature Humidity: -20~60?, 80%RH Altitude: 2, 000 meters Power Supply: 2 * 1.5V AAA battery (NOT included) Item Size: 215 * 63.5 * 36mm / 8.46 * 2.5 * 1.41 in Item Weight: 278g / 9.82 oz Package Weight: 371g / 13.11 oz Package Size: 23.5 * 9.2 * 5.3 cm / 9.25 * 3.62 * 2.09 in Package List: 1 * Clamp Meter 2 * Test Lead 1 * Temperature Probe 1 * Storage Bag 1 * Manual (English)
Uni-T
UNI-T UT204+ 6000 Counts Digital Clamp Meter True RMS Multimeter Clamp Ammeter Voltage Meter NCV Test Universal Meter Tester AC/DC Current Clamp Tester -40~1000? Temperature Measurement LIVE Test
USB Power Meter LCD USB Tester Detector Voltmeter Ammeter Digital Power Capacity Tester(UT658A)
Features: Versatile for Use --- UT658 series USB testers measures output voltage, current, energy, capacity, circuit equivalent resistance, D+ and D- voltage of USB data cable, and more. This series is designed to be precise, reliable, stable, and portable. Real-Time Monitoring --- With LCD screen can show all the measure digital, easy to see the current and voltage of the devices, and monitoring charging efficiency at any time to protect charging equipment. USB Port --- Support Micro USB Connector and fast charge mode recognition, it can recognize QC 1.0 / 2.0 / 3.0. This design convenient to test devices be accurate, reliable, stable. Premium Quality --- The housing is made of high quality white ABS material, which has excellent insulation and very beautiful. Wide Range of Application --- Used in varieties of test: PC/Laptop/Desktop Computer/Mobile Phone/Power Bank/Charger/Discharge Load/Car Charger/Cable Measurement. Specifications: Material: ABS Color: White Model: UT658A/UT658C/UT658DUAL Input Output Port: Type-A / Type-C / Dual Connector (optional) Voltage Range: 4-24V Current Range: 0.05 -5A Data Storage: 10 group Capacity: 99999mAh Maximum timing: 99h, 59min, 59sec ; resolution: 1s Loop equivalent resistance measurement: 1-480O Support fast charge protocol: (QC 1.0 / 2.0 / 3.0 Type-A), (QC 1.0 / 2.0 / 3.0 / 4.0 Type-C) Packing List: 1 * USB Tester
Uni-T
USB Power Meter LCD USB Tester Detector Voltmeter Ammeter Digital Power Capacity Tester(UT658A)
UT338A Formaldehyde Monitor Detector Formaldemeter Temperature Meter with Alarm
UT338A is a brand new home use formaldehyde monitor that utilizes newly imported electrochemistry sensor technology and high precision operational amplifier. The product is capable of continuously converting the signal representing formaldehyde concentration into an electrical signal, which will be displayed by LCD after being processed by the built-in micro-processor. It protects you and your family from the harm of formaldehyde and guarantees your health. Features: Transducer: Electrochemical sensor Working Temperature Range: -10? ~40? Working Humidity Range: 15~90%RH Barometric Pressure: 1 BP Input: AC 100~240V/50/60HZ 0.15A Rated Output Voltage: 4.2V Rated Output Current: 300MA Specifications: Measurement range: Formaldehyde: 0~3mg/m3 Resolution: 0.01 mg/m3 ±5% Formaldehyde: 0~3mg/m3 Resolution: 0.01 mg/m3 ±5% Humidity: 25~90%RH Resolution: 1%RH ±5% General Characteristic: LCD Size: 41 * 66mm Product Net Weight: 220g Product Size: 138mm* 75mm * 30mm Product Color: White and Grey Package Size: 16 * 13.5 * 8cm / 6.4 * 5.4 * 3in Package Weight: 373g / 13.2 oz What's in the box: 1 * Formaldehyde Monitor 1 * Power Adapter 1 * USB Cable 1 * User Manual
Uni-T
UT338A Formaldehyde Monitor Detector Formaldemeter Temperature Meter with Alarm
USB Power Meter LCD USB Tester Detector Voltmeter Ammeter Digital Power Capacity Tester (UT658-Dual)
Features: Versatile for Use --- UT658 series USB testers measures output voltage, current, energy, capacity, circuit equivalent resistance, D+ and D- voltage of USB data cable, and more. This series is designed to be precise, reliable, stable, and portable. Real-Time Monitoring --- With LCD screen can show all the measure digital, easy to see the current and voltage of the devices, and monitoring charging efficiency at any time to protect charging equipment. Dual Port --- Tests most common standard USB-A or USB-C ports, and fast charge mode recognition, it can recognize QC 1.0 / 2.0 / 3.0 / 4.0. This design convenient to test devices be accurate, reliable, stable. Premium Quality --- The housing is made of high quality white ABS material, which has excellent insulation and very beautiful. Wide Range of Application --- Used in varieties of test: PC/Laptop/Desktop Computer/Mobile Phone/Power Bank/Charger/Discharge Load/Car Charger/Cable Measurement. Specifications: Material: ABS Color: White Model: UT658A/UT658C/UT658DUAL Input Output Port: Type-A / Type-C / Dual Connector (optional) Voltage Range: 4-24V Current Range: 0.05 -5A Data Storage: 10 group Capacity: 99999mAh Maximum timing: 99h, 59min, 59sec ; resolution: 1s Loop equivalent resistance measurement: 1-480O Support fast charge protocol: (QC 1.0 / 2.0 / 3.0 Type-A), (QC 1.0 / 2.0 / 3.0 / 4.0 Type-C) Package Weight: 64g/ 2.3 oz Package Size: 13* 6.5 * 2.3 cm/ 5.1 * 2.6 * 0.9 in Packing List: 1 * USB Tester
Uni-T
USB Power Meter LCD USB Tester Detector Voltmeter Ammeter Digital Power Capacity Tester (UT658-Dual)
USB Power Meter LCD USB Tester Detector Voltmeter Ammeter Digital Power Capacity Tester (UT658C)
Features: Versatile for Use --- UT658 series USB testers measures output voltage, current, energy, capacity, circuit equivalent resistance, D+ and D- voltage of USB data cable, and more. This series is designed to be precise, reliable, stable, and portable. Real-Time Monitoring --- With LCD screen can show all the measure digital, easy to see the current and voltage of the devices, and monitoring charging efficiency at any time to protect charging equipment. Type-C Port --- Support Type-C Connector and fast charge mode recognition, it can recognize QC 1.0 / 2.0 / 3.0 / 4.0. This design convenient to test devices be accurate, reliable, stable. Premium Quality --- The housing is made of high quality white ABS material, which has excellent insulation and very beautiful. Wide Range of Application --- Used in varieties of test: PC/Laptop/Desktop Computer/Mobile Phone/Power Bank/Charger/Discharge Load/Car Charger/Cable Measurement. Specifications: Material: ABS Color: White Model: UT658A/UT658C/UT658DUAL Input Output Port: Type-A / Type-C / Dual Connector (optional) Voltage Range: 4-24V Current Range: 0.05 -5A Data Storage: 10 group Capacity: 99999mAh Maximum timing: 99h, 59min, 59sec ; resolution: 1s Loop equivalent resistance measurement: 1-480O Support fast charge protocol: (QC 1.0 / 2.0 / 3.0 Type-A), (QC 1.0 / 2.0 / 3.0 / 4.0 Type-C) Package Weight: 64g/ 2.3 oz Package Size: 13* 6.5 * 2.3 cm/ 5.1 * 2.6 * 0.9 in Packing List: 1 * USB Tester
Uni-T
USB Power Meter LCD USB Tester Detector Voltmeter Ammeter Digital Power Capacity Tester (UT658C)
USB Power Meter LCD USB Tester Detector Voltmeter Ammeter Digital Power Capacity Tester (UT658C)
Features: Versatile for Use --- UT658 series USB testers measures output voltage, current, energy, capacity, circuit equivalent resistance, D+ and D- voltage of USB data cable, and more. This series is designed to be precise, reliable, stable, and portable. Real-Time Monitoring --- With LCD screen can show all the measure digital, easy to see the current and voltage of the devices, and monitoring charging efficiency at any time to protect charging equipment. Type-C Port --- Support Type-C Connector and fast charge mode recognition, it can recognize QC 1.0 / 2.0 / 3.0 / 4.0. This design convenient to test devices be accurate, reliable, stable. Premium Quality --- The housing is made of high quality white ABS material, which has excellent insulation and very beautiful. Wide Range of Application --- Used in varieties of test: PC/Laptop/Desktop Computer/Mobile Phone/Power Bank/Charger/Discharge Load/Car Charger/Cable Measurement. Specifications: Material: ABS Color: White Model: UT658A/UT658C/UT658DUAL Input Output Port: Type-A / Type-C / Dual Connector (optional) Voltage Range: 4-24V Current Range: 0.05 -5A Data Storage: 10 group Capacity: 99999mAh Maximum timing: 99h, 59min, 59sec ; resolution: 1s Loop equivalent resistance measurement: 1-480O Support fast charge protocol: (QC 1.0 / 2.0 / 3.0 Type-A), (QC 1.0 / 2.0 / 3.0 / 4.0 Type-C) Package Weight: 64g/ 2.3 oz Package Size: 13* 6.5 * 2.3 cm/ 5.1 * 2.6 * 0.9 in Packing List: 1 * USB Tester
Uni-T
USB Power Meter LCD USB Tester Detector Voltmeter Ammeter Digital Power Capacity Tester (UT658C)
Back to Top