Viking Single Line Loud Ringer - VK-SR-1
Loud ringing from an analog line- Loud ringing from a dry contact closure- Choose one of four ringing sounds: -Electronic warble (traditional loud ringer) -Double gong (two identical "gong" tones) -Quadruple chime (four descending chime tones -Electronic Bell- Adjustable volume control- Provides a door chime tone for either a door bell, door open sensor or "Push for Assistance" button- Test button for setting volume- Power supply included
Viking DLE-300 Advanced Line Simulator
Advance Line Simulator for Communication, High Speed Data, Caller ID and Classroom Training The DLE-300 Advance Line Simulator provides sales people, technicians, engineers, etc., with a cost effective and easy to use method of conducting on-site demonstrations, programming or diagnostics without the need to locate phone lines or disrupt customer phone service. The Line Simulator provides two-way communication between standard analog telecom products, such as modems, fax machines, Key Systems, PABX's, as well as standard telephones. The DLE-300 produces standard or distinctive AC ringing, DC talk battery, caller ID data, precise dial tone, ring back, fast and slow busy, SIT, re-order tone, and provides CPC on disconnect. Applications Point-to-point communications between phones, fax machines, and high-speed modems without dedicated telephone lines Programming and recording voice products such as voice mail systems, etc. Intersystem TIE lines Courtesy and/or emergency phones Demonstrating telecom equipment at trade shows, meetings, etc. Diagnosing phone line dependant equipment with precise phone characteristics 911 trainer for schools and businesses Replacement for Proctor Model #46220, 49250, and 49300 Features Supports all high speed data Produces Name or Name and Number Caller ID data Audio input/output for recording voice prompts 40 V DC talk battery Precise call progress tones (dial tone, ring back, fast and slow busy, SIT, and re-order tones Standard and distinctive 20 Hz AC ringing Provides CPC breaks after disconnect Touch Tone detection Ringdown mode (no Touch Tones required) 911 trainer mode for classroom training Made in the USA. One year warranty Specifications Power: 120 V AC/13.5 V AC 1.25A UL listed adapter Dimensions: 127mm x 127mm x 25mm (5 x 5 x 1.5) Weight: 1.36 kg (3 lbs.) Environmental: 0° to 32° C (32° to 90° F) with 5% to 95% non-condensing humidity Ringer Output: 6.0 REN Maximum Loop: 4.2 Km (14, 000 ft.) - 24 AWG twisted pair Connections: (2) RJ-11 jacks, 1 3.5mm (1/8) audio jack Data Transmission Speed: Maximum supported by peripherals/modems
Viking Electronics - E40BK - Viking Electronics E-40-BK Intercom Sub Station
The E-40 Series Entry phones are compact, weather and vandal resistant, telephone line powered speaker phones designed to provide two-way handsfree communication. The E-40's compact size allows it to be mounted in a standard single gang electrical box. Product Type: Intercom Sub Station Product Type: Intercom Sub Station Manufacturer Part Number: E40BK Limited Warranty: 2 Year Color: Satin Black Color: Satin Black Manufacturer: Viking Electronics, Inc Product Model: E-40-BK Product Name: E-40-BK Intercom Sub Station Brand Name: Viking Electronics Product Series: E-40 Brand Name: Viking Electronics Product Family: E-40
Viking 35AE
Attractive white grill for flush mounting in office ceilings. Mounting hardware included. Large permanent magnet. Excellent frequency response. Designed to work with all of Viking's paging products. The 35AD includes a volume control.
Viking Electronics - K-1900-7-EWP - Viking Electronics K-1900-7-EWP Standard Phone - 1 x Phone Line
Viking vandal resistant hotline phone with enhanced weather protection. Auto dials 1 (up to 32 digits) programmable speed dial number. Touch tone or pulse dialing. Non-volatile memory (no batteries required). Operates on analog PABX and key system extensions or analog centrex and CO lines. Programmable 6 digit security code. Touch tone programmable. 1/8 Inch thick stainless steel panel, armored cable and metal cable. Programmable pre-dial pause. Blocks fraudulent calls from hand held pocket dialers. Hearing aid compatible amplified handset with sealed push button volume control. 54 inch armored handset cord. Enhanced weather protection. K19007EWP.
Viking Paging and Loud Ringer
The Viking PA-2A provides loud ringing and paging to electronic key systems, 1A2 Key systems, PABX's as well as No-KSU phones and multiline phones. Paging is accomplished by connecting the PA-2A to a paging port or unused telephone line input (trunk port) of nearly any phone system. The PA-2A will also generate adjustable loud ringing from up to 6 analog lines or from a dry contact closure. Either a loud electronic warble, or one of three other soft chime sounds may be selected. An external "night transfer" switch can be added to turn loud ringing on or off in night bell applications. The PA-2A is easy to install and eliminates the installation of multiple bells, relays and paging cards. The unit comes complete with a power supply, amplifier and paging horn.
Viking Feedback Eliminator - VK-FBI-1A
High quality (80K/40K) digital message storage- High output - 2V RMS into 600ohms- 16 to 32 second record time (DIP switch selectable) - Compatible with paging ports or trunk ports- Activate recording from VOX detection, contact closure or loop detect (trunk mode only) - VOX sensitivity adjustment- Cancel page feature- Selectable page repeat- Selectable pre-page alert tone- Selectable post-page alert tone- Adjustable alert tone volume- N. O. /N. C. relay contacts control paging system- Record/Playback LED indicator- Compatible with virtually all paging and telephone systems
VikinX Network Electronics AES/EBU Router AD1602CP
Clean Used Pull From A Working Environment. Listing Is Only For Items Shown In Pictures. *NO POWER ADAPTER INCLUDED*
Viking E-30-PT-EWP E-30-PT with EWP
The E-30-PT is designed to provide quick and reliable communication in noisier areas. The mic sensitivity is set to a low level until the TALK button is pressed then it is raised to a normal level. In this way, the E-30-PT assures that the called party's voice will be broadcast over the speaker. In applications where the background noise can be louder than the person calling, a handset type phone is recommended. The E-30-PT-EWP shares all of the features of the E-30-PT in addition to Enhanced Weather Protection (EWP) for installation in harsh environments. EWP products feature rubber gaskets and boots, silicon sealed connections, gel-filled butt connectors, as well as urethane potted circuit boards with weather sealed, field-adjustable trim pots and DIP switches for easy on-site programming. Package Contents: E-30-PT-EWP Emergency Phone Gel-Filled Butt Connectors Spade Terminal Screws Product Type: Emergency Phone Product Type: Emergency Phone Manufacturer Part Number: E-30-PT-EWP Limited Warranty: 2 Year Manufacturer: Viking Electronics, Inc Product Model: E-30-PT-EWP Product Name: E-30-PT-EWP Emergency Phone Brand Name: Viking Electronics Brand Name: Viking Electronics
Viking Electronics - PA-15 - 15 Watt Paging Amplifier with Background Music and Loud Ringing
The Viking 15 Watt Paging/Loud Ringing Amplifier interfaces with virtually any telephone system to provide 15 watts of paging power - enough to drive fifteen 8-ohm paging horns or speakers.The PA-15 provides 36V talk battery for interfacing with an FXO or unused analog line input/trunk port. With the flip of a switch, the unit can connect to a FXS or PABX/Centrex station ring trip port or connect to a 600 ohm paging port. When interfacing with systems that do not provide a paging contact closure, the built-in voice activation (VOx) is in control.After paging, the PA-15 auto disconnects on CPC, busy signal, silence or default disconnect timer (helps prevent accidental paging system lock-up if phone is hung-up incorrectly). The unit will generate adjustable loud ringing from an independent ringing analog FXS / PABX / Centrex station or from a dry contact closure. This amplifier can provide background music (muted during page) if connected to an external music source.
Viking E-1600-30A with Enhanced Weather Protect
The Viking E-1600-30A device can resist wind, wind and dust, plus damage from tampering and abuse. It also offers enhanced weather protection, or "EWP," equips this Viking E-30 stainless steel speakerphone to outlast harsh weather condition.
Package Contents:
Viking E-30-EWP handsfree entry phone
Plastic rough-in box
Installation hardware
Features:
Hands-free operation
Phone line powered
Vandal resistant, stainless steel faceplate with heavy duty metal call button
Non-volatile E memory (no batteries required)
Touch Tone or pulse dialing
Programmable to dial a second number on busy or ring no answer
LED off-hook indicator
Hangs up on CPC, silence, busy signal, return to dial tone, time out or a Touch Tone command
Programmable to auto-answer on incoming calls
Remotely programmable
Extended temperature range (-15°F to 130°F)
Weather resistant
Rough in box included
Viking C-200 Single Entry Phone Controller
Viking Door Entry Control for 4 Entry Phones, Provides CO Sharing, Call Waiting, and One Aux Contact. Allows an entry phone to share a single telephone line with a residential or business telephone system. House phones ring with C. O. line cadence or distinctive ring when the entry phone Call button is pressed. Compatible with these Viking entry phones: - E-10, E-20A, E-30, E-40 Handsfree Phones - K-1500-7 Stainless Steel Panel Phone - Or use with any analog touch tone phone. Provide entry phone activated chimes and whole house paging when used with Viking model SLP-1. Produces double Call Waiting tones. One set of normally open and normally closed contacts available for operating a doorbell, camera, lights, etc. Add door strike capability with the Viking model RC-2A Remote Touch Tone Controller.
15 Watt Paging Amplifier and Loud Ringer - VK-PA-15
15W of paging power- Drive up to 15 8-ohm speakers- 600-ohm output to drive additional amplifiers- Select: FXO (loop start), FXS (ring trip), or paging port (VOX relay) interface mode- Independent volume controls for Paging, Ringing Tones, and Background Music- 36V DC talk battery for interfacing with FXO or unused phone system line input/trunk port- Compatible with 24V to 48V FXS (ring trip) analog station operation- 800Hz pre-announce page tone (on/off)- Provides "Night Bell" warble tone via contact closure or independent ringing analog circuit- Choose one of four ringing sounds: - Electronic warble (traditional loud ringer) - Double gong (two identical "gong" tones) - Quadruple chime (four descending chime tones) - Door chime (ding-dong)- Night transfer switch input- CPC detection for immediate disconnect- Busy signal detect disconnect- Adjustable silence time out disconnect- Programmable VOX trigger sensitivity and time out- 16 to 72 second (or off) default disconnect timer
Viking DVA-2WA
Digital announcer/recorder. Built in 2 watt amplifier to connect directly to speakers. Designed to providemusic and promotion on hold by using playback in a continuous loop or alternating between promotions and an auxiliary music source at 2 second to 30 minute intervals. Any number of multiple messages may be recorded. Announcer comes with four professionally pre-recorded promotions on hold pacifier messages, as well as, power supply and cabling for an easy plug and play installation. Output may be connected directly to loudspeakers with messages repeated in timed intervals or played at the push of a button for museum displays, information booths, point of interest locations, etc. 7.5 minutes of user recordable memory (select fromuser recorded messages or four pre-recorded on-hold pacifier messages). Three playback options: on demand, continuous, and timed intervals. Non-volatile memory (no batteries required). Record from electret mic, carbon handset, tape, CD, PC sound card or any line level device. 600 ohm audio output for high wattage amplifiers. Multiple message capabilities (total number of messages only limited to maximum record time). AGC (Automatic Gain Control) for trouble free recording. Auxiliary audio (MOH) input for between message background music. Remote trigger input for on-demand playback from a remote contact closure. Press and hold play mode. Status LED forrecord and playback indication. Master and auxiliary input volume controls. I. O. communications port (allows only one DVA-2WA to announce at a time). Power: 120V AC/12V DC, 500mA adapter provided. Dimensions: 133mm x 89mm x 44mm ( 5.25" x 3.5" x 1.75" ). Shipping weight: 1.0 kg ( 2.2 lbs). Environmental: 0*C to 32*C (32*F to 90*F) with 5% to 95% non-condensing humidity. Frequency response: 100- 3.4KH z. Sampling rate: 64K (equivalent). User message length: 7.5 minutes maximum. Recording audio input level: 30mV - 1.0V RMS (AGC range), 600 Ohm audio output level: 0.3V RMS maximum (across a 600 ohm loa
Multi-input Voice Dialer/Annou - VK-K-2000-DVA
Non-volatile memory (no batteries required) - Stores up to seven 16-digit numbers and one 32-digit phone number per input (64 total) - 60 total seconds of record time- Programmable message repeat counter- Programmable lap counter for dialing groups of phone numbers- Eight programmable normally open/closed inputs- Programmable ring delay for remote programming and alarm polling- Pager compatible- Remote security and access codes- Programmable store caster mode- CPC break detection- Local or remote programming and recording- RS-232 port for programming via a P. C. - Compatible with the RC-2A and RC-3 remote DTMF controllers
Viking Vandal Resistant Stainl - VK-K-1500-6A
K-1500-6A: Now with heavy duty hookswitch and 14 gauge stainless steel faceplate- Operates on C. O. lines or analog PABX/KSU stations- Flush mounts to a standard double gang box
Viking Electronics - E-20B-EWP - Viking Electronics E-20B-EWP Intercom Sub Station - Surface Mount
The E-10A and E-20B are telephone line powered speaker phones designed to provide two way hands free communication. Both function identically, but are available in two different housings to better suit the application. When the "Call" button is pressed, the E-10A or E-20B will come off-hook and will remain off-hook until a CPC signal is detected, the programmed timeout has elapsed, a busy signal is detected, or the call goes silent, making the unit automatically disconnect. Additional Information: ? Alternate action call button to place or cancel a call ? Intelligent call progress detection for automatic hang-up on CPC, silence, busy signal, or time out ? Telephone line powered ? Adjustable microphone and speaker volume ? Programmable maximum call length ? Selectable auto-answer feature allows remote monitoring ? Programmable VOX (mic/speaker) switching speed ? Surface mountable ? Enhanced weather protection
Viking - SO-24 - 24-line Svc.observat
- Viking silent phone observation unit- Allows supervisors to silently monitor employee phones without disrupting the activity at their workstation- 24 station capacity can be expanded to 240 stations at any time - Compatible with analog PABX/KSU stations - Monitor stations from an unused phone system line input or to a dedicated single line phone - Add remote observing with a RAD-AMP Remote Access Device - Built-in talk assist (dial *) - Dial up code can be programmed to match the station number - Cassette recorder output and Touch Tone control - Automatic gain control equalizes in and outbound conversation levels - Configurable for digital phones (requires the SO-24 AK and an extra pair of wires to each phone handset) - One year manufacturer's warranty VKSO24A
SIP Loud Ringer with Visual Ring - VK-SR-IP
SIP Loud Ringer with Visual Ring Indication PoE-powered audio device for providing loud ring and visual ring inidcation for SIP VoIP phone systems Four programmable ring patterns Programmable Automatic Gain Control (AGC), which automatically compensates the ring volume for background ambient noise Applications - use the loud ringer for noisy or variable noise environments and the visual ring indicator for quiet areas 2 Amp relay contacts for LPL-1 or SL-2 strobe light control SIP compliant Class 2 PoE with consumption < 6.5W Network downloadable firmware Surface mounts to a single gang or 4"x4" electrical box, wall, or post Remotely adjust ringer volume Maximum Sound Pressure: 93dB SPL at 1 meter Audio Codecs: G. 711u, G. 711a, G. 722
Viking M2w Loud Call Annc&ringing
Viking M2w Loud Call Annc & ringing condition: New Brand: Viking MPN: m2w
Viking - E-10A - Speaker Phone with Call Button & Black Aluminum Faceplate, Flush Mount with Included Rough-In Box or
Speaker Phone with Call Button & Black Aluminum Faceplate, Flush Mount with Included Rough-In Box or Surface Mount with an Optional VE-5x5
Viking Electronics VK-SA-1S IR Controlled Ceiling Speaker - NEW - Retail - VK-SA-1S
Ir Controlled Ceiling Speaker 8 Inch Paging Speaker Builtin 1.5 Watt Power Amplifier Infrared Remote Control Detector Integrated Digital Volume Control Users Set Their Own Volume Levels To Suit The Noise Levels In The Room Allows Users To Totally Mute The Speaker Audible Feedback Inchbeepinch To Set The Proper Volume UPC: 172302622164 SKU: ADIB00FMGWDSY
Viking Electronics - VE-9X12R-2 - Red Heavy-Duty Outdoor Enclosure with Silver in. Telephonein. Lettering includes
Outdoor Enclosure The VE-9x12 and VE-9x20 provide the ultimate in weather protection for your Viking product or other telecom devices. These enclosures are constructed of cast aluminum and are made for years of outdoor service. The heavy-duty aluminum doors are labeled œTelephone and have a gasket seal to keep out even the harshest weather. The VE-9x12 allows you to choose from two panels that allow mounting many different Viking products. Both the VE-9x12 and VE-9x20 are available in three high visibility colors: emergency red with silver lettering, safety yellow with red lettering, or black with silver lettering. Applications Parking lots Maintenance areas Building exteriors Swimming pools Play grounds Roadside help areas Features Heavy-duty 319 cast aluminum construction Powder coated for durability and UV stability Drip guard and gasket sealed door 0.020 thick stamped aluminum œTelephone label with scratch resistant UV stable clear coat ½ NPT conduit openings on top and bottom Available in Emergency Red, Safety Yellow or matte Black Mounting holes for a standard RJ11 wall plate (VE-9x12 with adapter panel 1) VE-9x12 available with two adapter panels Hardware included with all adapter panels Optional VE-SPG door return hinge spring available Optional VE-PBL push button lock and key set available VE-9x12-0 Enclosures without adapter plates for mounting other (non-Viking) telecom products, available in all three colors, label included Specifications Dimensions: See Technical Practice Shipping Weight: VE-9x12 - 5.9 kg (13 lbs) Colors: Red with silver lettering, yellow with red lettering or matte black with silver lettering Conduit Opening: ½ NPT top and bottom with top plug
Viking VE-6X7 Viking Surface Mount Box
The VE-6x7 adds vandal resistance as well as versatility to Viking's K-1700-3 handsfree phone with keypad or the K-1705-3 handsfree phone with color camera and keypad. The VE-6x7 is a black powder painted steel, weather resistant box designed to be surface mounted to a single gang box, a wall or a VE-GNP or VE-GNP-2 pedestal. Applications:. Surface mounting the K-1700-3 or K-1705-3. Attaching the K-1700-3 or K-1705-3 to a VE-GNP or VE-GNP-2 gooseneck pedestal. Features:. Mounts to a standard single gang box. Mounts directly to the wall. Mounts to model VE-GNP or VE-GNP-2 gooseneck pedestal. Specifications:. Material: 16 gauge CRS. Finish: UV stable black fine texture powder paint. Dimensions: 5.64" x 6.72" x 3.25".
Viking K-1900-6 Viking Hot-Line Dialer Network
VIKING K-1900-6 VIKING HOTLINE DIALER NETWORKViking hotline dialing card20 digit programmable speed dial numberTouch Tone and 10/20 pps pulse dialingOperates on standard C. O. lines, Centrex lines, or analog stations behind key systems and PABX'sNonvolatile E2 memory (no batteries required) Won't dial on incoming callsProgrammable security codeTouch Tone programmableOne year manufacturer's warranty
Viking - K-600F - 9165 Ringing Over Paging Amp
Information Name: 9165 RINGING OVER PAGING AMP, Viking Electronics Description: Loud Ringing Over Paging Amplifier Category: Power Amplifiers, Commercial Amplifiers, Commercial Audio, Audio & Video UPC Code: 615687224610 UPC: 615687224610 Weight: 0.5 lbs
VIKING 25AE 8OHM PAGING HORN WEATHER RESISTANT
The 25AE and 30AE paging speakers provide additional economical paging coverage to existing Viking paging units (PA-2A, CPA-7B, HF-3W, M2W) or to any system with an 8 ohm output. In outdoor, factory or warehouse environments, 25AE paging horns are the best method of producing understandable sound. In these environments, the directional design allows the installer to focus the sound cone down aisles and toward work areas. RMS Output Power: 12 WMinimum Frequency Response: 400 HzMaximum Frequency Response: 7 kHzImpedance: 8 Ohm Form Factor: Surface Mount Speaker Installation: Indoor/Outdoor Diameter: 5Limited Warranty: 1 Year"
Viking Electronics - PS-48-RGA - Viking Electronics PS-48-RGA AC Power Supply - 13.8 V AC, 120 V AC Input Voltage - Wall
VIKING PS-48-RGA POWER SUPPLY, 48V TALK BATTERYApplications: Electronic Key SystemsPaging systemsOPXsProvides 48V talk batteryProvides 90VG ring voltage
Viking Electronics - E160002A - Viking Electronics E-1600-02A Intercom Sub Station - Cable
The E-1600-02A ADA Compliant Emergency Phone is designed to provide quick and reliable handsfree communication for any standard analog telephone line or analog phone system station port. The E-1600-02A meets ADA requirements for elevator / emergency telephones, and can be programmed from any touch tone phone. It can dial up to 5 programmable emergency numbers, as well as 2 central station numbers. The E-1600-02A can be programmed to automatically deliver a digital announcement to identify the location of the emergency call. Additionally, a DTMF touch tone code may also be delivered. A Call Connected LED can be initiated manually or automatically. All programming parameters, including phone numbers and location numbers, are stored in non-volatile memory. The E-1600-02A is phone line powered, requiring no batteries or external power and is compatible with common Central Station Monitoring equipment. Application/Usage: Public Access Area Application/Usage: Convention Center Application/Usage: Stadium Application/Usage: Entryway Application/Usage: Lobby Application/Usage: Medical Center Application/Usage: Elevator Application/Usage: Telephone Application/Usage: Public Access Area Application/Usage: Convention Center Application/Usage: Stadium Application/Usage: Entryway Application/Usage: Lobby Application/Usage: Medical Center Application/Usage: Elevator Application/Usage: Telephone Product Type: Intercom Sub Station Product Type: Intercom Sub Station Input Voltage: 24 V DC Manufacturer Part Number: E160002A Limited Warranty: 2 Year Connectivity Technology: Cable Form Factor: Flush Mount Connectivity Technology: Cable Form Factor: Flush Mount Manufacturer: Viking Electronics, Inc Product Model: E-1600-02A Product Name: E-1600-02A Intercom Sub Station Brand Name: Viking Electronics Brand Name: Viking Electronics Country of Origin: United States Height: 13 Width: 10.5 Depth: 2
Two-Input Voice Alarm Dialer - VK-K-202-DVA
Non-volatile memory (no batteries required) - Stores up to seven 32-digit phone numbers (fourteen 32-digit numbers total)- 2 minutes of record time (1 minute per input) - Programmable message repeat counter- Two inputs programmable normally open or normally closed and enabled or disabled- Programmable ring delay for remote programming and alarm polling- Programmable qualifier timer for each input (time for an event to be qualified as an alarm) - Programmable resume timer for each input (time following reset for input to become active again) - Call progress detection- Programmable ringback limit for call progress- Remote security and access codes- Local or remote programming and recording- COmpatible with the RC-2A and RC-3 remote DTMF controllers- Phone numbers may be programmed as pager numbers (no voice message played)
Viking Electronics - K-1700-3EWP - Viking Electronics K-1700-3-EWP Emergency Phone
Viking stainless steel handsfree telephone with keypad and enhanced weather protection. Vandal resistant features: 14 guage, louvered, stainless steel faceplate with stainless steel speaker/mic screen, heavy duty metal keypad and "Call" button. Enhanced weather protection. Yellow "in use" LED. Volume adjustments for microphone and speaker. Advanced call progress detection: disconnects on busy signal, return to dial tone, CPC reorder tone, maximum call time out and selectable silence time out. Selectable auto-answer feature. Selectable push button disconnect. Zinc plated steel rough-in box with (2) 3/4" conduit knockouts. Optional VE-6x7 Surface mount box available. Selectable maximum call time. Selectable VOX switching speed. K-1700-3-EWP conforms to NEMA requirements.
Viking Electronics - CPC-1 - Viking Electronics CPC1 cbc disconnect device
VIKING CPC-1 VIKING CALLING PARTY CONTOL Viking CPC disconnect signal generatorGenerates one second disconnect when busy signal is detected, hangs up and redials numberPhone line powered (no AC needed) Generates CPC disconnect on: return to dial tone (programmable) busy signal, reorder (fast busy) steady silence (programmable) LED shows: in use audio detected generated CPC signalCaller ID compatibleCPC disconnect time: 1 second nominalConnections: 4 position screw terminal blockVKCPC1
Viking 2-Way Line Emulator - VK-DLE-200B
Compatible with fax machines and modem speeds up to 28.8 kbps- Precise dial tone 32V DC talk battery- Switch selectable ring cadence- Provides CPC breaks after hang-up on either port- Switch selectable audio attenuation- Provides 2 seconds of precise dial tone after off-hook- Provides ring back signal to calling device- One or two way ring down capability- Jumber selectable ring count- Ring down and dial tone off mode (ideal for prison phone communications, etc. )
VikinX Network Electronics Router SL-AD1602
Clean Used Pull From A Working Environment. Listing Is Only For Items Shown In Pictures. *NO POWER ADAPTER INCLUDED*
Viking 7 Foot Privacy Cord - VK-PC-7
Line powered modular or punch-down installable- Compatible with analog lines with 12V DC or higher talk battery- Transparent operation
Viking VK-K-1900-8
Auto dial 1 (up to 32 digits) programmable speed dial number. Multi-number dialer mode adds 5 (up to 16 digits) speed dial numbers. Touch tone or pulse dialing. Non-volatile memory (no batteries required). Operates on analog PABX and key system extentions or analog Centrex and C. O. lines. Programmable 6 digit security code. Touch tone programmable. Vandal resistant. Programmable pre-dial pause. Blocks fraudulent calls from hand held pocket dialers. Limited toll restriction. Hearing aid compatible amplified handset with sealed push button volume control.
VIKING E-1600-IP VOIP HANDSFREE EMERGENCY PHONE
ADA Compliant VoIP Emergency Phone with Built-In Dialer and Digital Voice Announcer, Can be programmed to automatically deliver a digital announcement to identify the location of the emergency call. Alternatively, a DTMF Touch Tone code may also be delivered. A Call Connected LED can be initiated manually or automatically. PoE powered, Dial up to 5 programmable emergency numbers, 2 Amp relay contacts for door/gate or SL-2 strobe light control, SIP compatible, Automatic Noise Canceling feature for proper operation in noisy environments, Grade 2 Braille label for the visually impaired
Paging / Loud Ringer with 8 Ohm Horn - VK-PA-2A
Two watts of paging power- All lines are optically coupled for use with fax switches and analog PABX/KSU stations- Can provide background music from an external source- Paging from an unused trunk port or paging port- Four loud ringing sounds: Electronic warble Double gong Quadruple chime Door chime (ding-dong)- Provides loud ringing or night bell, from 1-6 lines for warehouses, yards, etc. - Output for controlling a 12V relay from 1-6 ringing lines- Page alert tone- 600ohm output for sourcing high powered amplifiers Includes one 25AE 8 ohm paging horn (can support a maximum of 3)
VIKING LDB-1 VIKING LOOP DETECT BOARD
VIKING LDB-1 VIKING LOOP DETECT BOARDPhone line poweredExcellent line balanceOptional PS2 power supply for switched power
VikinX Network Electronics Router SL-AD1602-CP
VikinX Sublime provides many of the powerful control features that drove the VikinX Modular range to success. VikinX Sublime is ideal for general purpose facilities, on-air routing, mobile outside broadcast applications and sophisticated A/V applications. With the new ultra slim, multi format and flexible product range, Sublime fulfills the most demanding requirements from the professional broadcast market.
Viking Electronics - E-1600A-EWP - Viking Electronics E-1600A-EWP Emergency Phone - Surface-mountable for Emergency
The Viking E-1600A-EWP ADA Compliant Elevator Emergency Phone with Enhanced Weather Protection is designed to provide quick and reliable hands-free communication for any standard analog telephone line or analog phone system station port. This phone meets ADA requirements for elevator/ emergency telephones and can be programmed from any Touch Tone phone. The phone can dial up to 5 programmable emergency numbers, as well as 2 central station numbers.The E-1600A-EWP phone can be programmed to automatically deliver a digital announcement to identify the location of the emergency call. Alternatively, a DTMF Touch Tone code may also be delivered. A "Call Connected" LED can be initiated manually or automatically. All programming parameters, including phone numbers and location numbers, are stored in non-volatile E2 memory. All units are phone line powered, requiring no batteries or external power and are compatible with common Central Station Monitoring equipment.For outdoor installations where the unit is exposed to precipitation or condensation, the Viking E-1600A-EWP Elevator Emergency Phone with Enhanced Weather Protection features foam rubber gaskets and boots, sealed connections, gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards with internally sealed, field-adjustable trim pots and DIP switches for easy on-site programming.
Universal Telecom Paging - VK-PI-1A
Integrate your public address system with nearly any phone system- Cut out background music during paging- Electronic night bell from ringing line or contact closure- Floating 600 ohm output- Selectable 22V DC talk battery for interfacing with unused phone system line input/trunk ports- Paging port interface- Ringing analog line input for night bell- Contact closure input for night bell- DPDT normally open and normally closed VOX activated contacts for cutting out background music- Adjustable VOX contact time-out- Adjustable VOX trigger sensitivity- Adjustable ring volume- Adjustable ring pitch- Power: 120V AC/12V DC 500mA, UL listed adapter provided- Dimensions: 111mm x 76mm x 36mm ( 4.38 ” x 2.97 ” x 1.38 ”)- Shipping Weight:. 48 kg ( 1.06 lbs)- Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95% non-condensing humidity- Relay Contacts: 30V DC@1A, 110V DC@ 0.3A, 125V AC @ 0.5 - Maximum Ring Output: 490mV AC RMS no load, 150mV AC RMS@600 ohms- VOX Minimum Audio Signal to Activate Relay: 30mV AC RMS@1K Hz- Talk Battery: 22V DC
Viking - E-35-EWP - Stainless Steel Handsfree Phone with Dialer and Color Video Camera, Flush Mount with Included
VIKING E-35-EWP VIKING E-35 WITH EWPViking weather and vandal resistant handsfree video phoneQuick, reliable communication and CCTV video of who is at the gateCan be connected directly to a CO line, analog PABX/KSU station, or a Viking door or gate controllerNonvolatile memoryBuiltin dialerBuiltin high resolution color video cameraIntelligent call progress detection for automatic hangup when call is completedProgrammable to dial up to 5 different numbers on ring, no answer or busy and can be configured to dial these numbers until answeredEnhanced weather protection (EWP): rubber gaskets and boots, closed cell foam gasketing, handsoldered silicon sealed connections, anticorrosive gel fired butt connectors, as well as urethane encapsulated circuit boards with internally sealed fieldadjustable trime POTS and DIP switchesBuiltin 5 autodialerBuiltin high resolution color video camera with wide operating temperature of30°F to 150°FAudio and video transmission on one CAT5E cableVandal resistant features: 14 gauge louvered stainless steel faceplate with stainless steel speaker/mic screen, heavy duty metal call button, impact and scratch resistant camera lens and hex drive mounting screwsWeather resistant features: Mylar speaker, faceplate gasket, mic and speaker gasket, internally sealed push button switch, sealed camera lens, potted camera circuit board, stainless steel phone and camera mounting hardwareRed offhook LEDVolume adjustments for microphone and speakerAdvanced call progress detection: disconnects on busy signal, return to dial tone, CPC, reorder signal, maximum call time out and selectable silence time outSelectable autoanswer feature for monitoringSelectable push button disconnectOptional VE5x5 surface mount box availableSelectable maximum call timeSelectable VOX switching speedVKE35EWP
Viking - E-1600-30-IPEWP - VoIP ADA Compliant Stainless Steel Emergency Phone with Dialer and Voice Announcer Flush
Information Name: E-1600-30IP W/ ENHNCD WTHR PRT, Viking Electronics Description: E-1600-30Ip With Enhanced Weather Protection Category: Emergency Phones, Emergency Communication, Communications UPC Code: 615687225815 UPC: 615687225815 Weight: 2.5 lbs
Viking Electronics - K-1900W-2 - Viking Electronics K-1900W-2 Standard Phone - Ash - 1 x Phone Line
VIKING K-1900W-2 HOTLINE WALL PHONE - REDTelephone line poweredHearing aid compatible amplified handsetsRotary handset volume control1 32digit programmable speed dial numberTouch Tone and 10/20 pps pulse dialingNonvolatile E2 memory (no batteries required) Restricts fraudulent calls from hand held dialersAvailable in red or ashOptional Q170600 ringerOperates on a C. O. line or analog PABX/KSU extensionsRing detection (will not dial on incoming calls) Programmable security code to enter programming modeTouch tone programmable VKK19006 fits standard 500, 554, 2500, and 2554 set phones
Viking - E40BN - Oil Rubbed Bronze Entry Phone with Automatic Disconnect and Blue LED, Flush Mounts in Single Gang Box
VIKING E-40-BN VIKING DOOR PHONE OIL RUBBED BRONZE Compact size: Front panel is the size of a typical single gang midsize wall plate Mounting: Flush mounts in a single gang electrical box ( 2.25 deep x 2.00 wide x 2.84 tall minimum) or surface mounts in a viking model VE3x5 (not included) Available in 5 standard faceplate finishes: Brushed Stainless Steel, Oil Rubbed Bronze, Polished Brass, Satin Black and Satin White PNL40 faceplates: Replacement faceplates with matching screws available in all five standard finishes Vandal resistant features: 16 gauge polished brass or 18 gauge 304 stainless steel faceplate, 316 stainless steel push button, carbon fiber reinforced plastic speaker screen, scratch resistant powder coating, hex drive mounting screws Weather resistant features: Mylar speaker, faceplate gasket, mic and speaker gasket, internally sealed push button switch, self draining mic mount and UV stable weather resistant powder coating (excluding E40SS 304 Stainless Steel Faceplate) Telephone line powered Microphone and speaker volume controls Programmable intelligent call progress detection for automatic hangup on CPC, silence, busy signal, or time out Selectable auto answer feature for monitoring Programmable VOX (mic/speaker) switching speed Blue LED helps locate push button, indicate ringing and off hook
Viking VE-3X5 Surface Mount Box for E-40 Series
The VE-3x5 adds vandal and weather resistance, as well as versatility to the E-40 Series entry phones.The VE-3x5 backboxes are black powder painted steel, weather resistant boxes designed to be surface mounted to a wall, post, or single gang box.The VE-3x5 is designed to be used with the E-40 Series entry phones and is also compatible with EWP versions of the E-40 Series entry phones.Mount Location: Surface MountMount Location: Wall MountColor: BlackHeight: 4.9Width: 3.2"Depth: 1.8"Limited Warranty: 1 Year"
Viking Electronics - E-32-EWP - Handsfree Double Gang Speaker Phone with Dialer and Enhanced Weather Protection
New Automatic Noise Cancelling (ANC) feature for proper operation in noisy environments- Vandal Resistant Features: 14 gauge louvered 316 stainless steel faceplate with permanent laser etched graphics, speaker/mic screen, heavy duty metal Call button and T-10 Torx security mounting screws and drive bit- Weather Resistant Features: Marine grade 316 stainless steel faceplate, screws and push button switch. Switch internally sealed per IP67. Mylar speaker. Self-draining mic mount. Faceplate, mic and speaker gaskets. - Telephone line powered- Non-volatile E2 memory (no batteries required) - Programmable to dial up to 5 numbers on busy / ring no answer- Blue off-hook LED indicator- Volume adjustments for microphone and speaker- Advanced call progress detection: disconnects on busy signal, return to dial tone, CPC, reorder tone, maximum call time out and programmable silence time out- Selectable auto-answer feature for monitoring- Extended temperature range (-15F to 130F)- E-32-EWP is designed to meet IP66 Ingress Protection Rating- E-32 flush mounts in a standard double gang box (not included) - Optional PB-1 Panic Button Kit (DOD# 233)- Also available with VoIP interface, see DOD# 248 for more info
Viking Electronics - E-20B - Viking Electronics E-20B Intercom Sub Station
The Viking E-20B telephone line powered entry phones designed to provide two-way handsfree communication. When the "Call" button is pressed, the E-20B will come off-hook and will remain off-hook until a CPC signal is detected, the programmed timeout has elapsed, a busy signal is detected, or the call goes silent, making the unit automatically disconnect. It can be connected directly to a C. O. line or analog PABx/KSU station when programmed as a ringdown circuit, or used with a Viking Dialer. If a line or station is not available, Vikings DLE-200B ring down circuit can be used. Also known as -Viking Electronics Speaker Phone with Push Button-Viking Intercoms Speaker Phone with Push Button VK-E-20B-Viking Electronics E-20B Entry Speakerphone with Push Button
Viking Paging System with Amplifier with 2 Speaker Horns Fully Powered for Use through Phones for Schools, Warehouses, Offices, Autoshops, etc.
Add Paging and Multiple Line Loud Ringing to Any Phone System This system provides loud ringing and paging to electronic key systems, 1A2 Key systems, PAB Xs as well as No-KSU phones and multiline phones Paging is accomplished by connecting to a paging port or unused telephone line input (trunk port) of nearly any phone system It will also generate adjustable loud ringing from up to 6 analog lines or from a dry contact closure Either a loud electronic warble, or one of three other soft chime sounds may be selected An external night transfer switch can be added to turn loud ringing on or off in night bell applications It is easy to install and eliminates the installation of multiple bells, relays and paging cards The unit comes complete with a power supply, amplifier, and weather resistant high quality paging horn Specifications: Night bell Loud ringing Two watts of paging power All lines are optically coupled for use with fax switches and analog PABXKSU stations Can provide background music from an external source Paging from an unused trunk port or paging port Four loud ringing sounds: Electronic warble - Double gong - Quadruple chime - Door chime (ding-dong) Provides loud ringing or night bell, from 1-6 lines for warehouses, yards, etc Output for controlling a 12 volt relay from 1-6 ringing lines Page alert tone 600 ohm output for sourcing high powered amplifiers Power: 120V AC/ 13.8V AC 1.25A, UL listed adapter provided Dimensions: 133mm x 89mm x 44mm ( 5.25 x 3.5 x 1.75 ) Paging Output: 2 watts - powers up to (3) 8 ohm or (16) 45 ohm speakers Sound Pressure: 110 dB 1 meter (warble) Speakers: (3) Paging horns included Maximum Speaker Run: 91m (300 ft) maximum 18 AWG Talk Battery: 24V DC Connections 2 RJ25 jacks 10 position screw terminal block
Viking Electronics - K-1600EHFA - Viking Electronics K-1600-EHFA Emergency Phone - 6.9 Width x 2.1 Depth x 9.9 Height
Standard elevator phone box mount RED. ALUMINUM. Viking Electronic's 1600A Series Emergencyphones are designed to provide quick and reliablehandsfree communication over the public switched telephone network. The 1600A series meets ADA requirements for elevator telephones, and can be programmed from any touch tone phone. The 1600A series phones can automatically send the digital announcement to identify the location of the emergency call, then automatically light the call connected LED. The 1600A series can also be used with Central Station Monitoring equipment. All parameters, phone numbers and location numbers are stored in non-volatile E2 memory. All units are phone line powered, requiring no batteries or external power sources.
Viking Electronics VK-E-30-EWP EWP Stainless Steel Hansdsfree
The E-30 handsfree phone is designed to provide quick and reliable handsfree communication and can be connected directly to a C. O. line or analog PABX/KSU station. The E-30 features non-volatile memory, a built in dialer, and intelligent call progress detection for automatic hang-up when the call is completed. The E-30 can be programmed to dial up to 5 different numbers on ring no answer or busy and can be configured to dial these numbers until answered. The E-30-EWP shares all of the features of the E-30 in addition to Enhanced Weather Protection (EWP) for outdoor installations where the unit is exposed to precipitation or condensation. EWP products feature foam rubber gaskets and boots, sealed connections, gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards with internally sealed, field-adjustable trim pots and DIP switches for easy on-site programming. For more information, see DOD# 859. Also known as -VIKING E-30-EWP EWP Stainless Steel Hansdsfree-Viking Electronics EWP Stainless Steel Hansdsfree-Viking Intercoms Hands-Free Phone with Stainless Steel and Enhanced Weather Prot-Viking Electronics E-30-EWP Handsfree Speaker Phone with Enhanced Weather Protec
Viking Electronics - E-1600-IP-EWP - Viking Electronics E-1600-IP-EWP Intercom Sub Station - Cable - Wall Mount, Surface
VIKING E-1600-IP-EWP E-1600-IP WITH EWPEWP products feature foam rubber gaskets and boots, sealed connections, gelfilled butt connectors, as well as urethane or thermal plastic potted circuit boardsSelf diagnostic reports via email (testing com, mic, speaker & switch)Automatic polling and programming software included2 Amp relay contacts for door/gate or SL2 strobe light controlSIP compatible (see pg 2 for list of compatible IPPBX phone systems) PoE powered (class 1,
Viking K-1700-IP-EWP Voip Stainless Steel Entry Phone
The PA-2A provides loud ringing and paging to electronic key systems- 1A2 Key systems- PABX's as well as No-KSU phones and multiline phones. Paging is accomplished by connecting the PA-2A to a paging port or unused telephone line input (trunk port) of nearly any phone system. The PA-2A will also generate adjustable loud ringing from up to 6 analog lines or from a dry contact clo-sure. Either a loud electronic warble- or one of three other soft chime sounds may be selected. An external -night transfer- switch can be added to turn loud ringing on or off in night bell applications. The PA-2A is easy to install and eliminates the installation of multiple bells- relays and paging cards. The unit comes complete with a power supply- amplifier and (1) paging horn.. Applications: Amplified loud Paging. Night bell. Loud ringing. Features: Two watts of paging power. All lines are optically coupled for use with fax switches and analog PABX/KSU stations. Can provide background music from an external source. Paging from an unused trunk port or paging port. Four loud ringing sounds: Electronic warble. Double gong. Quadruple chime. Door chime (ding-dong). Provides loud ringing or night bell- from 1-6 lines for warehouses- yards- etc. Output for controlling a 12 volt relay from 1-6 ringing lines. Page alert tone. 600 ohm output for sourcing high powered amplifiers. Made in the USA. Specifications: Power: 120V AC/ 13.8V AC 1.25A - UL listed adapter provided. Dimensions: 133mm x 89mm x 44mm ( 5.25 - x 3.5 - x 1.75 -). Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95% noncondensing humidity. Paging Output: 2 watts - powers up to (3) 8 ohm or (16) 45 ohm speakers. Sound Pressure: 110 dB @ 1 meter (warble). Speakers: (1) 25AE 8 ohm paging horn included- (3) maximum. Maximum Speaker Run: 91m (300 ft) maximum 18 AWG. Talk Battery: 24V DC. Connections: (2) RJ25 jacks- (1) 10 position screw terminal block.
Line Powered Off Hook Ring MW Indicator - VK-LPL-1
Applications: Hearing impaired locations Call centers Telemarketing Product support groups Office cubicles CO based voice messaging Purchasing departments Sales offices- Displays "Ringing", "On-the-Phone" or "Message Waiting" on analog phone lines or PABX stations- LED visible up to 100ft- Telephone line powered- Attractive new compact package- Connects with a modular cord or screw terminals- Easy to install- Easy wall mounting with included doubleback tape
FaxJack Phone/Fax Switch - VK-FAXJ-1000
Viking FaxJack phone/fax switch- Allows any business, largeor small, to enjoy the convenience of automated data transmission without the perpetual monthly expense of a dedicated phone line- Versatile phone/data/fax switch with the ability to automaticallyroute calls via fax CNG tone, central office distinctive ring, or touch tones included in the dial string by the calling party- Offers full manual transfer capabilities- Stores and retransmitscaller ID information so that it is truly caller ID compatible- Applications: governmental, commercial, home office, industrial, personal computers, vending machines, remote access applications, point-of-sale terminals, fast food chains, retail stores, convenience stores - Four ports allow any four analog devices to share a single line - Routes calls via CNG tone, distinctive ringing, touch tones sent by calling device or manually - Provides realistic ring-back tones while re-ringing selected device - Transfer from one port to another as often as may be required during the samecall - Caller ID information is stored and retransmitted during transfer - Automatic privacy eliminates interruptions on both in and outbound calls - Monitors for calling party control (CPC) - All in and outbound calls are routed to the phone port during a power failure - Power: 120VAC/12V DC 500mA, UL listed adapter provided - CNG Detection: 1100 Hz burst - Connections: (1) 10-position cage clamp terminal strip - VKFAXJ1000
Viking K-1900w-2 Basic Phone 1 X Phone Line(s) - 1 X Rj-11 - Ash (k1900w2)
Viking K-1900w-2 Basic Phone 1 X Phone Line(s) - 1 X Rj-11 - Ash (k1900w2) condition: New Brand: VikingModel: K-1900W-2Lines: 1Type: Corded PhoneMPN: K-1900W-2MPN: K1900W2
Viking Electronics VK-E-1600-50A E-1600A Parts Kit without Chas
The 1600A Series ADA Compliant Emergency Phones are designed to provide quick and reliable hands-free communication for any standard analog telephone line or analog phone system station port. All 1600A Series phones meet ADA requirements for elevator/ emergency telephones, and can be programmed from any Touch Tone phone. The phones can dial up to 5 programmable emergency numbers, as well as 2 central station numbers. Also known as -E-1600-50A Security Kit without Chassis-Viking E-1600-50a Circuit Board/button/speaker For 1600a Series Phone-Viking Phone Accessories Emergency Phones Parts Kit without Chassis VK-E-1600-50-Viking -1600a Parts Kit without Chassis
Viking Electronics - E-1600-55A - Viking Electronics E-1600-55A Emergency Phone
The 1600A Series ADA Compliant Emergency Phones are designed to provide quick and reliable handsfree communication for any standard analog telephone line or analog phone system station port. All 1600A Series phones meet ADA requirements for elevator/ emergency telephones, and can be programmed from any Touch Tone phone. The phones can dial up to 5 programmable emergency numbers, as well as 2 central station numbers. In addition, the E-1600-20A and E-1600-52A feature a second INFO button that will dial up to 3 non-emergency numbers. The 1600A Series phones can be programmed to automatically deliver a digital announcement to identify the location of the emergency call. Alternatively, a DTMF Touch Tone code may also be delivered. A Call Connected LED can be initiated manually or automatically. Package Contents: E-1600-55A Emergency Phone Screws Material: Stainless Steel Product Type: Emergency Phone Product Type: Emergency Phone Compatibility: Viking LSD-2 Line Sharing Device Viking LSR-1 Emergency Device Viking Emergency Phones: E-1600-03B E-1600-02A E-1600-03B-EWP E-1600-20A E-1600-20A-EWP E-1600-30A E-1600-30A-EWP E-1600-40A E-1600-45A E-1600-45A-EWP E-1600-50A E-1600-50A-EWP E-1600-52A E-1600-52A-EWP E-1600-55A-EWP E-1600-60A E-1600-60A-EWP E-1600A E-1600A-BLT-EWP E-1600A-BLT2EWP E-1600A-EWP LC-8 Viking Replacement for Talk-A-Phones: E-1600A-TP-EWP E-1600A-TP2-EWP Manufacturer Part Number: E-1600-55A Limited Warranty: 2 Year Manufacturer: Viking Electronics, Inc Product Model: E-1600-55A Product Name: E-1600-55A Emergency Phone Brand Name: Viking Electronics Product Series: 1600A Brand Name: Viking Electronics Product Family: 1600A
Viking - CPC-4 - Generate CPC Disconnect Signals
VIKING CPC-4 GENERATE CPC DISCONNECT SIGNALS Viking calling party controlgenerate CPC disconnect signals on four separate phone lines Phone line powered (no AC needed) Handle 4 lines in 1 unit Generates CPC disconnect on: Return to dial tone (programmable), Busy signal, Reorder (fast busy), Steady silence (programmable) LED shows: In use, Audio detected, Generated CPC signal Caller ID compatible Power: Telephone line powered (20VDC, 20mA minimum)Dimensions: 133mm x 89mm x 44mm ( 5.25 x 3.5 x 1.75 )Shipping Weight: 1.13K g ( 2.5 lbs)Environmental: 0° C to 32° C (32° F to 90° F) with 5% to 95% noncondensing humidity CPC Disconnect Time: 1 second nominal Connections: 4 position screw terminal block VKCPC4
