Whirlwind IMP PAD Microphone Attenuator (-10dB)
Input a line signal into a mic pre or match levels between two pieces of gear with these precision in-line H-pads. XLR male to XLR female. Attenuation: -10dB
Whirlwind MK Series 10' Accusonic+2 XLR Male to XLR Female Microphone Cable
The Whirlwind MK Series 10' Accusonic+2 XLR Male to XLR Female Microphone Cable is built with Accusonic+2 cable and fitted with Whirlwind XLR connectors to ensure superior cable performance year after year. The cable is extremely flexible, resistant to handling microphonics and reliable under the roughest conditions. Accusonic+2 features finely stranded center conductors and braided shield for superior noise rejection.
Whirlwind MicPower 2
Whirlwind MicPower 2 condition: New Brand: Whirlwind MPN: MICp2
Whirlwind 10' Antenna Cable, BNC, RG8 Antenna, 50Ohms, Belden 8237 #BNCRG8-010
Antenna cables are made with 50Ohms Belden wire and are available with either BNC or UHF connectors at both ends. Type 3 cables are low loss for long cable runs.
Whirlwind XLR Male to XLR Female Neutrik Adapter, Unwired #NA3FM
Wiring assembly required. This connector will be shipped in three parts: 1. the tubular insulator 2. the pin and base sub-assembly 3. the plug or extension jacks assembly.
Whirlwind Leader Instrument Cable (Straight, 15 ft)
There's not a performer out there that doesn't bend, pinch, or tangle their cable. That's why Whirlwind invented the Leader Series. Premium, rugged, and practically indestructable, the Leader plug's patented cable grip absorbs any typical straining in the field. And its flexible boot extension has virtually eliminated breakage at the cable exit. Combined with Accusonic+1cable, the Leader is the highest quality instrument cable manufactured today.
Whirlwind Leader Instrument Cable (Straight, 10 ft)
There's not a performer out there that doesn't bend, pinch, or tangle their cable. That's why Whirlwind invented the Leader Series. Premium, rugged, and practically indestructable, the Leader plug's patented cable grip absorbs any typical straining in the field. And its flexible boot extension has virtually eliminated breakage at the cable exit. Combined with Accusonic+1cable, the Leader is the highest quality instrument cable manufactured today.
Whirlwind MK Series 100' Accusonic+2 XLR Male to XLR Female Microphone Cable
Whirlwind MK Series 100' Accusonic+2 XLR Male to XLR Female Microphone Cable
Whirlwind 3' 8 Conductor 13 Gauge NL8 Speakon to NL8 Speakon Speaker Cable
The Whirlwind 3' 8 Conductor 13 Gauge NL8 Speakon to NL8 Speakon Speaker Cable represent latest efforts to provide the industry with the most reliable connectors and cables available today. The 8 Conductor cable use 12/4 SJ type wire. This cable have the same NL8 connector at each end.
Whirlwind Medusa Standard MS-16-8-XL 100' Audio Snake Cable, XLR Connector
Whirlwind's Medusa Series Snakes have been the touring standard worldwide for decades. They're still made here at their Rochester NY factory. Heavy duty powder coated steel stagebox with Whirlwind connectors and integrated handle Whirlwind by Belden NEC CM rated multipair cable, heavy duty, flexible, multipair cable. Each pair contains two twisted 24GA 7x32 polyethylene insulated conductors with 100% foil shield and 24GA drain wire Fanouts with multiple layers of rugged heat shrink at the most critical points Fanouts feature Whirlwind connectors with engraved numbers and letters Genuine Kellems wire mesh hanger to support the fan-out at the board. Genuine Kellems strain relief and grip with internal cable clampStandard fan-out lengths are: 3 ft. - up to 28 channels 4 ft. - 28 channels and upOptional SnakeSkin is available for the ultimate in fan-out protection (for an extra charge). Medusas are also available with integrated cable reel.
Whirlwind STM10 10' 3-Pin Male XLR to 1/4" Male TRS Balanced Cable
Whirlwind STM10 10' 3-Pin Male XLR to 1/4" Male TRS Balanced Cable
Whirlwind Female XLR to Female XLR Switchcraft Adapter #Z389
The Whirlwind Z389 Switchcraft Adapter is an XLR female to XLR female adapter plug.
Whirlwind Classic Series Instrument Cable (Right Angle, 25 ft)
Whirlwind builds their Classic instrument cables with the same Accusonic+1 cable found in the Leader. Features their 1/4" plug with a non-phenolic insulator and extended cable clamp. A great cord for those that prefer a more traditional look.
Whirlwind Classic Series Instrument Cable (Straight, 6")
Whirlwind builds their Classic instrument cables with the same Accusonic+1 cable found in the Leader. Features their 1/4" plug with a non-phenolic insulator and extended cable clamp. A great cord for those that prefer a more traditional look.
Whirlwind MK Series 50' Accusonic+2 XLR Male to XLR Female Microphone Cable
The Whirlwind MK Series 50' Accusonic+2 XLR Male to XLR Female Microphone Cable is built with Accusonic+2 cable and fitted with Whirlwind XLR connectors to ensure superior cable performance year after year. The cable is extremely flexible, resistant to handling microphonics and reliable under the roughest conditions. Accusonic+2 features finely stranded center conductors and braided shield for superior noise rejection.
Whirlwind MK Series 30' Accusonic+2 XLR Male to XLR Female Microphone Cable
The Whirlwind MK Series 30' Accusonic+2 XLR Male to XLR Female Microphone Cable is built with Accusonic+2 cable and fitted with Whirlwind XLR connectors to ensure superior cable performance year after year. The cable is extremely flexible, resistant to handling microphonics and reliable under the roughest conditions. Accusonic+2 features finely stranded center conductors and braided shield for superior noise rejection.
Whirlwind IMP Pad - 40 dB
40dB Inline Attenuation Pad 40dB Inline Attenuation Pad
Whirlwind ISOXL Line-Level Isolation Transformer
Housed in a high impact nylon casing, the Whirlwind ISOXL outperforms the industry leading inline isolation transformer. This is a professional quality compact transformer in an XLR male/female tube for quick fix line isolation. The shield is lifted from input to output.
Whirlwind 10' 8 Conductor 13 Gauge NL8 Speakon to NL8 Speakon Speaker Cable
The Whirlwind 10' 8 Conductor 13 Gauge NL8 Speakon to NL8 Speakon Speaker Cable represent latest efforts to provide the industry with the most reliable connectors and cables available today. The 8 Conductor cable use 12/4 SJ type wire. This cable have the same NL8 connector at each end.
Whirlwind 50' Medusa Multitrack 12-Ch XLRM to TRS Male Fanout Snake Cable
The Whirlwind 50' Medusa Multitrack Series 12-Channel XLR Male to 1/4" TRS Male Fanout Snake Cable is designed to interface multitrack recorders or outboard equipment to mixing consoles. Each Multitrack Medusa is constructed of Whirlwind multipair cable with a heat-shrunk fanout at each end. Each fanout can be specified with distinct connector types and signal polarity. When the same type of connector is specified at each end, wiring is pin to pin. Wire mesh hanger grips can be ordered as an option.
Whirlwind Medusa Multitrack 4x XLR-F Fan to 4x XLR-M Fan Snake Cable, 25' Length
Whirlwind Medusa Multitrack 4 XLR Female Fan to 4 XLR Male Fan Snake Cable, 25' Length
Whirlwind MultiSelector 4-Ch Unidirectional 1 to 4 Instrument/Amplifier Switcher
The Whirlwind MultiSelector 4-Ch Unidirectional 1-to-4 Instrument/Amplifier Switcher that silently switches one instrument to multiple amps, with complete isolation between amplifiers. The input is electronically buffered with a 1MegOhm input impedance, which emulates a proper amplifier load and prevents any degradation to the instrument's tone. The signal passes through the MultiSelector AMP transparently, with no coloration and the digitally controlled optical switching is completely silent.
Whirlwind Leader Instrument Cable (Right Angle, 18 ft)
There's not a performer out there that doesn't bend, pinch, or tangle their cable. That's why Whirlwind invented the Leader Series. Premium, rugged, and practically indestructable, the Leader plug's patented cable grip absorbs any typical straining in the field. And its flexible boot extension has virtually eliminated breakage at the cable exit. Combined with Accusonic+1cable, the Leader is the highest quality instrument cable manufactured today.
Whirlwind IMP Pad - 30 dB
30dB Inline Attenuation Pad 30dB Inline Attenuation Pad
Whirlwind Leader Instrument Cable (Straight, 10 ft)
Whirlwind Leader 10 ft Braided Shield instrument cableThere's not a performer out there that doesn't bend, pinch, or tangle their cable. That's why Whirlwind invented the Leader Series. Premium, rugged, and practically indestructable, the Leader plug's patented cable grip absorbs any typical straining in the field. And its flexible boot extension has virtually eliminated breakage at the cable exit. Combined with Accusonic+1cable, the Leader is the highest quality instrument cable manufactured today.
Whirlwind Leader Instrument Cable (Straight, 25 ft)
There's not a performer out there that doesn't bend, pinch, or tangle their cable. That's why Whirlwind invented the Leader Series. Premium, rugged, and practically indestructable, the Leader plug's patented cable grip absorbs any typical straining in the field. And its flexible boot extension has virtually eliminated breakage at the cable exit. Combined with Accusonic+1cable, the Leader is the highest quality instrument cable manufactured today.
Whirlwind LIFTER Pin 1 XLR Ground Lifter
Ideal for troubleshooting ground problems, this female-to-male XLR 3-pin inline device disconnects pin 1 between the connectors. It isolates the ground of a balanced audio signal without requiring you to cut the cable's shield wire.
Whirlwind Medusa Multitrack 10' 6 Ch 3-Pin XLR Male to Female Fanout Snake Cable
Whirlwind Medusa Multitrack Series 10' 6 Channel 3-Pin XLR Male to XLR Female Fanout Snake Cable
Whirlwind Classic Series Instrument Cable (Right Angle, 10 ft)
Whirlwind builds their Classic instrument cables with the same Accusonic+1 cable found in the Leader. Features their 1/4" plug with a non-phenolic insulator and extended cable clamp. A great cord for those that prefer a more traditional look.
Whirlwind Classic Series Instrument Cable (Right Angle, 6")
Whirlwind builds their Classic instrument cables with the same Accusonic+1 cable found in the Leader. Features their 1/4" plug with a non-phenolic insulator and extended cable clamp. A great cord for those that prefer a more traditional look.
Whirlwind 75 Ohm RG59 BNC to BNC Canare WLV61S Video Cable, 2' #BNCRG59-002
Standard and flexible versions of the 75 Ohms video cable are available. The W8241 offers standard performance, the W1505 and W8281 are for use in precision analog or digital applications, and the W1694A is a low loss serial digital cable.
Whirlwind Leader Instrument Cable (Straight, 18 ft)
There's not a performer out there that doesn't bend, pinch, or tangle their cable. That's why Whirlwind invented the Leader Series. Premium, rugged, and practically indestructable, the Leader plug's patented cable grip absorbs any typical straining in the field. And its flexible boot extension has virtually eliminated breakage at the cable exit. Combined with Accusonic+1cable, the Leader is the highest quality instrument cable manufactured today.
Whirlwind Leader Instrument Cable (Straight, 6 ft)
There's not a performer out there that doesn't bend, pinch, or tangle their cable. That's why Whirlwind invented the Leader Series. Premium, rugged, and practically indestructable, the Leader plug's patented cable grip absorbs any typical straining in the field. And its flexible boot extension has virtually eliminated breakage at the cable exit. Combined with Accusonic+1cable, the Leader is the highest quality instrument cable manufactured today.
Whirlwind Multisplitter Rack-mountable 4-Channel 1x2 Microphone Signal Splitter
Whirlwind Multisplitter Rack-mountable 4-Channel 1x2 Microphone Signal Splitter, 20Hz-20kHz Frequency Response, 150 Ohms Impedance
Whirlwind PcUSB 2-Channel Active USB Pieces Direct Box
Brand: Whirlwind Features: 2-channel USB-in/ Analog-out Direct Box Binding: Electronics Publisher: Whirlwind Details: Convert the digital audio from your USB-equipped device into a quality analog signal with the Whirlwind pcUSB. This direct box takes the audio on your laptop smartphone or tablet and transforms it into a balanced transformer-isolated analog signal that you can connect to a PA or console. Experience great sound that's free of noise and distortion thanks to a ground lift and pad. The 2-channel pcUSB runs in both stereo and mono. Package Dimensions: 7.8 x 7.7 x 2.2 inches
Whirlwind Micmute PPD Latching Switch-On/Switch-Off Desktop Design Audio Switch
The Whirlwind Micmute PPD Latching Switch-On/Switch-Off Desktop Design Audio Switch is configured as latching Push On; Push Off switches, meaning that the switch must be pushed and released to turn the signal on or off through the box. Each time the switch is toggled the signal is changed from one condition to the other. It has an indicator LED feature that is operational when the connected microphone preamp input is providing phantom power. The blue LED illuminates to indicate that the mic is live and signal is passing through the Micmute box. The LED is not functional when phantom power is not present. The Micmute PPD uses an indicating rocker switch, which displays a red bar when the signal is turned on.
Whirlwind DA-2M 1 RU 2-Channel Analog Audio Distribution Amplifier #DA2M
The Whirlwind DA-2M is professional quality two channel analog audio distribution amplifier which accepts either mic or line level inputs There are eight electronically balanced XLR line level outputs with individual volume controls and clip indicators. The audio performance is of the highest quality, making it an excellent value. Great care was taken in the design so that the DA-2M can fulfill any distribution requirement, from broadcast audio feeds to loudspeaker audio input distribution.Inputs feature Neutrik combo 1/4" TRS/XLR connectors, mic/line level input switches, variable input gain controls, low cut switches for reducing low frequency rumble or wind noise, four segment headroom indicators and 48 V phantom power that is applied to the XLR in mic mode and turned off when the input is used in line mode. The front panel COMBINE switch converts the DA-2M from two 1x4 distribution amps to a 2x8 distribution amp with the two inputs combining to feed all eight outputs. This provides the capability of having both a line and a mic input simultaneously. A headphone circuit allows signal monitoring of each input in mono or listening to both input channels in a stereo mode.
Whirlwind MultiSelector Pro 4-Channel Unidirectional 1 to 4 Instrument Switcher
The Whirlwind MultiSelector Pro 4-Channel Unidirectional Rack Mount 1 to 4 Instrument Switcher r incorporating innovative features sought after by touring professionals. The MultiSelector PRO allows selection of any 1 of 4 inputs to a single output. Each of the four inputs is electronically buffered with a 1 MegOhm input impedance which emulates a proper amplifier load and prevents any degradation to the instrument's tone. Signals pass through the MultiSelector PRO transparently, with no coloration and the digitally controlled optical switching is completely silent. It also included a tuner output on the front and rear. All three nonactive inputs are routed to the tuner outputs so a guitar tech can tune any instrument in a non active channel without unplugging it.
Whirlwind ISOPOD Line Level Summing Balancer for iPod
Housed in a high impact nylon casing, the Whirlwind ISOPOD safely sums to mono and transformer isolates unbalanced 1/8" ( 3.5 mm) stereo connections to balanced, XLR. Use to create a balanced mono signal from MP3 players and computers to send to professional mixers' line inputs.
Whirlwind SP1X3 1x3 Microphone Splitter
The Whirlwind SP1x3 is a 1 input, 3 output microphone signal splitter. The SP 1x2 features 1 direct and 2 transformer isolated output with an input / output impedance measured at 150 ohms. Each transformer isolated output on these devices features a ground lift switch.
Whirlwind Imp 1X2 Splitter
The Whirlwind SP1x2 is a 1 input, 2 output microphone signal splitter. The SP 1x2 features 1 direct and 1 transformer isolated output with an input / output impedance measured at 150 ohms. Each transformer isolated output on these devices features a ground lift switch.
Whirlwind Micmute PP Push-On/Push-Off Audio Switch Foot Pedal #MICMUTE-PP
The Whirlwind Micmute Push to Mute Latching Push On/Off Foot Pedal Mic Switch meaning that the switch must be pushed and released to turn the signal on or off through the box. Each time the switch is pressed and released the signal is changed from one condition to the other. The PP have an indicator LED feature that is operational when the connected microphone preamp input is providing phantom power. The blue LED illuminates to indicate that the mic is live and signal is passing through the Micmute box. The LED is not functional when phantom power is not present.
Whirlwind Cab Driver Speaker Component Tester
The CAB DRIVER is a test device for checking the operation of the speaker components within enclosures. A pink noise signal source is sent through pushbutton selectors to an assortment of speaker connectors, including Speakon NL8 and NL4, 1/4 & quot; TS and banana jacks.The pink noise level can be adjusted to appropriate levels for subwoofers, midrange cones and compression drivers and tweeters. There is also an XLR line output for feeding the pink noise to self-powered speaker units.A DC OHMS TEST button applies 5 VDC to the output terminals selected with the pushbuttons for observing cone movement to identify speaker and cabling polarity errors. This also performs a DC Ohms test where three LEDs indicate approximate ranges of 4, 8, or 16 Ohms. This helps identify blown drivers in cabinets where the cones cannot be readily observed or in cabinets with multiple drivers in series parallel configurations.Get yours today; with the security of our many decades of experience and Sam Ash Direct efficient order processing, your satisfaction is guaranteed!The CAB DRIVER is powered by 4 AA batteries or can be powered by an external 6 VDC power supply (not included).
Whirlwind HOTBOX Active Reference Direct Box
This top-of-the-line DI is an active direct box that operates with batteries or phantom power. Its super-clean front-end circuitry delivers extremely wide and flat frequency response and will reveal hidden harmonics from guitars and basses with high-output passive pickups. Features include: & bull; & nbsp; & nbsp; 1/4" parallel wired in/out jacks & bull; & nbsp; & nbsp; Ground Lift switch to help eliminate hum and buzz & bull; & nbsp; & nbsp; Input switch selects between instrument/line or speaker level input signals & bull; & nbsp; & nbsp; LED indicates "ON" status Specifications: & bull; & nbsp; & nbsp; Input Impedance: 1 Meg Ohms & bull; & nbsp; & nbsp; Frequency Response: 20Hz-200kHz ±3dB & bull; & nbsp; & nbsp; Residual Output Noise: -115dB & bull; & nbsp; & nbsp; Maximum Input Level: +15dBm - battery, +20dBm - 48V phantom. Add 20dBm with pad engaged & bull; & nbsp; & nbsp; Power Requirements: (2) 9V batteries or 48V phantom & bull; & nbsp; & nbsp; Battery Life: approximately 300 hours & bull; & nbsp; & nbsp; Current Draw: approximately 4.0 mA DC
Whirlwind 8-Channel Line Level Splitter with Direct and Isolated Outputs #SPC82L
The Whirlwind SPC82L is a passive, rack mountable line splitter designed for installed applications. The sleek, 1RU unit allows you to input eight line-level channels and provides both direct and transformer-isolated outputs for each channel. The unit uses high-quality Whirlwind transformers for great audio quality. All I/O connections are made via removable Phoenix-style connectors for making balanced connections. The isolated outputs will not pass phantom power, so the direct output must be connected to the source of phantom power if there is no power provided at the splitter. A series of ground-lift DIP-switches is provided on the back panel for eliminating hum caused by ground loops. A set of dipswitches is provided for each ISO output for lifting the ground connection between the input and output. Normally the switch is left in the "GND" position unless there is a problem with hum or buzz. Then moving to the LIFT" position may help reduce or eliminate the problem.
Whirlwind Medusa Elite ME-16-8-XL 100' Snake Cable, XLR Return Connector
The Medusa Elite offers the same features as Whirlwind Medusa Standard series with the addition of SnakeSkin on the fanouts for ultimate fan-out protection, Metal chassis mount XLR connectors and a Pig Bag to protect the fanouts during storage or when not in use. Whirlwind's Medusa Elite Snakes are an evolution of our world famous Standard series. They're still made here at their Rochester, NY factory. Heavy duty powder coated steel stagebox with Metal Whirlwind connectors and integrated handle Whirlwind by Belden NEC CM rated multipair cable, heavy duty, flexible, multipair cable. Each pair contains two twisted 24GA 7x32 polyethylene insulated conductors with 100% foil shield and 24GA drain wire Fanouts with multiple layers of rugged heat shrink at the most critical points Fanouts feature Whirlwind connectors with engraved numbers and letters Genuine Kellems wire mesh hanger to support the fan-out at the board Genuine Kellems strain relief and grip with internal cable clamp SnakeSkin on the fanouts for ultimate fan-out protection Pig Bag to protect the fanouts when not in useStandard fan-out lengths are: 3 ft. - up to 28 channels 4 ft. - 28 channels and upAll Medusas are available with integrated cable reel.
US Audio DA-2 Distribution Amp-by-Whirlwind
Distribution Amp - line-level inputs, line-level outputs, 2 x 4 or 1 x 8, level controls, XLR I/O, headphone monitor, 1 RUUPC:700112915130SKU:ADIB00AELJGI2
whirlwind leader instrument cable straight, 10 ft
There's not a performer out there that doesn't bend, pinch, or tangle their cable. That's why Whirlwind invented the Leader Series. Premium, rugged, and practically indestructable, the Leader plug's patented cable grip absorbs any typical straining in the field. And its flexible boot extension has virtually eliminated breakage at the cable exit. Combined with Accusonic+1cable, the Leader is the highest quality instrument cable manufactured today.UPC NO:787461641088 SKU:ADIB0002I9QHS
Whirlwind PB06 1 Line In to 6 Mic Out Passive Press Box
Whirlwind PB06 1 Line In to 6 Mic Out Passive Press Box
Whirlwind Medusa Mini 6 Channel Stagebox to Fanout Snake Cable, 50' Length
Whirlwind Medusa Mini 6 Channel Stagebox to Fanout Snake Cable, 50' Length, 6x XLR Send Connectors
Whirlwind PodMIXai 2 Channel Active Mixer
The podMIXai is an active mixing device that combines a microphone or wireless receiver mic output with an unbalanced stereo & nbsp; audio source for connection to a single mic level input of a sound system. Use it with CD and MP3 players, computer sound card outputs, DJ mixers, etc. along with a microphone in sports arenas, conference rooms, banquet halls, gymnasiums and party houses for paging or announcements over background music. The output is mono balanced mic level as shipped, but can be modified for a line level output. The podMIXai is a small tabletop enclosure with a rugged, ergonomic design for ease of use and easy storage. A wall adapter power supply (PS12AC1A) is included which provides 12 VAC at 1 Amp. Variable level controls on both the mic and music inputs allow level matching and mixing between the music source and the microphone. The mic input can provide up to 60 dB of gain. The music input can boost the signal 20 dB. On/Off switches for both the mic and music inputs allow convenient muting control of each signal. A bass cut switch is provided on the mic input which can reduce handling and wind noise. The LED meter has yellow and red LEDs that confirm output level and a green LED indicates that the podMIXaihas power. The yellow starts to illuminate when the output signal reaches -30 dB and the red starts at -10 dB and is fully on when the signal reaches -4 dB. Music signals are input via a single 3.5 mm (1/8”) stereo TRS jack which are summed to mono. & nbsp; & nbsp; The microphone input is a balanced female XLR jack and the output is via a balanced male XLR jack. Internal jumpers are provided for applying phantom power to the mic input, changing output level from mic to line and lifting the output pin 1 ground. They are accessed by removing the four screw holding the base of the unit. Get yours today; with the security of our many decades of experience and Sam Ash Music efficient order processing, your satisfaction is guaranteed!
Whirlwind Micmute PPD Latching Switch-On/Switch-Off Desktop Design Audio Switch, 1x XLR Female Input and 1x XLR Male Output Connectors
All three styles of MicMute will pass phantom power for use with condenser type microphones. The Micmute PM and PMD are configured as Push to Mute switches, meaning that the input signal is normally on, passing through the box. When the switch is depressed and held down, the signal is turned off or muted. The signal is reconnected as soon as the switch is released. The Micmute PT and PTD are configured as Push to Talk switches, meaning that the input signal is normally not connected to the output; nothing is passing through the box. When the switch is depressed and held down, the signal is turned on and passed through to thUPC:700112909474SKU:ADIB00ADHFZ46
Whirlwind MD-1 Mic to Line Driver with Headphone Monitor
The Whirlwind MD-1 is a compact portable unit that combines a high quality microphone preamp-line driver with a headphone amplifier designed to monitor the mic preamp or be used independently. The MD-1 employs two 9-Volt batteries and provides enough gain to drive both headphones and long signal lines and allow for maximum headroom in the mic preamp.
Whirlwind podDI - Single Output Summing Direct Box
The podDI is a single output summing direct box. Use it to connect CD and MP3 players, computer sound card outputs, DJ mixers, etc. to professional equipment with balanced inputs such as a mixing console. Accepts stereo inputs and sums them into a single mono output. A variable attenuator on each input allows level matching between left and right inputs. This makes the podDI from Whirlwind a passive mixer in split track audio applications, balancing the voice track and the music track levels in the summed mono output. Signal is input via 3.5 mm (1/8") stereo TRS jack or color coded RCA phono jacks Unused input can be used as a "loop through" Output is via a balanced male XLR jackGround lift switch to help eliminate hum and buzzCan also be used as a high quality single inputGet the latest DJ gear, right here at Sam Ash Direct! With our many decades of experience and efficient order processing, your satisfaction is guaranteed!
whirlwind rochester series orange box guitar pedal
Plug into vintage tone - The Orange Box from Whirlwind is a dead-on revival of the handwired classic from the 1970s, only this one's got a 9-volt AC adapter input and features hardwire bypass. It's the swirling, edgy phaser that started a wild trend. Get ready for loads of thick, rich tone - you've heard tone like The Orange Box on countless hit albums, without question. Michael Laiacona, president of Whirlwind, has been crafting amazing effects boxes for years - in fact, he was the cofounder of MXR. You've got to hear The Orange Box.UPC NO:692465018647 SKU:ADIB0041CU0JO
Whirlwind Selector AB Box Pedal
This box gives you the ultimate control over your instruments and your gear. You can alternate between channels A and B or select both. Send one guitar to two amps or use it the other way around to select between two guitars into one amp. Thanks to Whirlwind's patented, state-of-the-art optical switching, there's no added noise, pops or crackles and no alteration of your tone. Bright LEDs indicate channel status. Indestructible design means this pro quality box won't let you down on the gig. Run it on one 9V battery or with optional external 9V power supply (T401-ND).
Whirlwind IMP2 Standard Direct Box
The IMP 2 converts a line or instrument level unbalanced signal to a low impedance mic level balanced signal. It's the ideal direct box for anyone requiring professional quality and durability in an economical package. Features: 1/4" parallel wired in/out jacks. Ground Lift switch to help isolate hum and buzz. Uses Whirlwind's TRHL transformer that's riveted, not glued, to the chassis. Built rugged on the inside and outside, this is the world famous DI found in pro systems everywhere. Specs: Input Impedance: 20k Ohms Output Impedance: 150 Ohms Frequency Response: 20Hz-20kHz ±1dB Level Change: (input to output): -20dB
Whirlwind SBNL 1x NL8 to 4x NL4 Wired 2-Pole Splitter & Breakout Box #SBNL18442
The Whirlwind SBNL18442 is a SBNL 1x NL8 to 4x NL4 Wired 2-Pole Splitter & Breakout Box. The splitter is primarily intended to split the incoming speaker signal into multiple speaker cabinet connections for live sound reinforcement, stage monitoring applications, etc.
