Wooden Camera 15mm Baseplate for DSLR Cameras #243800
Unified DSLR 15mm Baseplate is a height adjustable baseplate attachment that provides 15mm lightweight rods at the correct lens height for DSLR cameras when combined with Unified DSLR Cage (Small) or Unified DSLR Cage (Medium). The Unified DSLR 15mm Baseplate has a native ARRI dovetail interface for direct mounting to our 2060 Dovetails, Safety Dovetails or Shoulder Rigs. The included Lower Quick Dovetail portion can be attached to any tripod plate or ARRI standard bridge plate such as Unified Bridgeplate (19mm) or Unified Bridgeplate (15mm Studio) providing studio rods at the correct lens height.
Wooden Camera Top Plate for Sony FS5 Camera #215900
Top plate for Sony FS5 camera which allows the handle to remain installed on the camera body. Arrays of 1/4-20 holes in standard spacing and multiple 3/8-16 holes for large accessories. ARRI Standard Accessory Mount in several places (3/8-16 threaded hole with locating pins adjacent). Tape hook included. Note that the Sony cable guide should be removed and installed on the side of the Top Plate. Great for mounting NATO Lock Magic Arm (7"), WC Magic Arm (7"), Universal Hot Shoe and more.
Wooden Camera Unified Cage for Sony a7/a9 Cameras #808014
Unified DSLR Cage (Small) is designed for the Sony A7 series and Panasonic GH5 cameras, which utilize a top-mounted XLR audio module for sound recording. The open shoe mount area allows for the XLR adapter to be installed without obstruction. The minimalist design gives you mounting points on the top and side while leaving all of the camera's vital controls on the right grip and left side easily viewable and accessible.The cage includes a reversible top handle which can be repositioned over the lens area when an XLR adapter is in use. Built into the handle is a cold shoe mount and a 15mm tube clamp for mounting any of our UVF Mount kits used with 3rd party electronic viewfinders. The handle can also fold down when packing your bag and can even be reconfigured onto the left, vertical 15mm rod for a secondary grip!Cameras with fold-out LCD screens can be positioned easily and an included HDMI cable clamp can be mounted to the vertical rod to secure video cables and prevent port damage.The bottom portion of the cage includes a Manfrotto quick release dovetail which can attach to a variety of Manfrotto tripod heads. Quick release functionality works the same as existing Manfrotto plates. Simply turn the thumbscrew and depress the release pin to slide the plate backward out of the base.A built lens adapter support system is integrated into the base which is great for attaching to adapters with a 1/4"-20 on the bottom like our E-Mount To PL Mount Pro (1/4-20 Support Foot), MFT To PL Mount Pro (1/4-20 Support Foot), and also many Metabones products.If lightweight 15mm support is desired, the cage may be combined with our Unified DSLR 15mm Baseplate to provide pass through rod support (sold separately)
Wooden Camera Unified Accessory Kit for Canon C300mkII Camera (Pro) #226200
The Canon C300mkII Camera Accessory Kit (Pro) is a professional camera support package designed for the Canon C300mkII camera. The C300mkII accessory package includes: Top Plate (C300mkII), a top mounting cheese plate that attaches by three screws, NATO Handle Kit (Cheese, 70mm), a quick release handle that attaches to the Top Plate, Unified Baseplate (Canon C300mkII), a quick release baseplate that holds two15mm Rods (15") at the correct lens height, Safety Dovetail (12") which interfaces with the ARRI dovetail slot on the bottom of the Unified Baseplate, UVF Mount v2 for holding EVFs & LCDs, Rod Clamp (15mm LW) attaches the Battery Slide to the 15mm LW rods. The Battery Slide is an adjustable battery plate for attaching a V-Mount or Gold Mount plate to the camera. Also included as part of the Top Plate (C300mkII) is the Universal Hot Shoe which is used to attach the Canon LCD Unit to any 1/4-20 or 3/8-16 hole. Top Plate (C300mkII) Top plate for the Canon C300mkII camera. Arrays of 1/4-20 holes in standard 9mm spacing. Multiple 3/8-16 holes for large accessories. ARRI standard accessory mount on top and sides. Includes Universal Hot Shoe for attaching the Canon C300mkII LCD Unit. To build a cage with this Top Plate, choose either the Fixed Base or Quick Base and add the Cage NATO Arm. Great for mounting EVF Mounts, Handles, external monitors and more. NATO Handle Kit (Cheese, 70mm) The NATO Handle Kit (Cheese, 70mm) is designed for quick release attaching and detaching on the camera without screws. Simply slide onto Safety NATO Rail and tighten down the thumbscrew. 70mm NATO Rail can attach to any two screw points up to 42mm center to center. Cheese grip with 19mm opening at rear. Arrays of 1/4-20 and 3/8-16 holes provides mounting points for additional accessories. Unified Baseplate Unified Baseplate (Sony FS7, Canon C100mkII, C300mkII, C100, C300, C500) is a quick release baseplate that provides lightweight 15mm rod support at the correct lens height. 15mm rods pass through front to back and have two locking thumbscrews per side. The baseplate quick releases in two ways, giving the user the option to take the 15mm lightweight rods or to leave them behind. To remove the camera and leave the LW 15mm rods behind, unlock the right side thumbscrew, slide the camera backwards a short distance and lift straight up. The dovetail attached to the bottom of the camera is an ARCA Swiss standard shape which can integrate with many third party products. Additionally, there are threaded 1/4-20 holes on the bottom for attaching to gimbals or tripod plates when necessary. Also on this upper dovetail is a vertical 15mm rod opening which can be used to support a lens adapter foot directly in front of the camera body. An example of this would be the Sony FS7 using a Metabones Canon EF adapter. The upper dovetail would be positioned with the vertical 15mm rod opening to the front and the Unified Lens Adapter Support Kit would be installed and threaded into the Metabones support foot. The bottom of the baseplate is comprised of the Lower Quick Dovetail which has 1/4-20 and 3/8-16 threaded holes for attaching to tripod plate or ARRI standard bridge plate such as Unified Bridgeplate (19mm) or Unified Bridgeplate (15mm Studio). To remove the camera from the included Lower Quick Dovetail and take the 15mm lightweight rods with you, unlock the left thumbscrew, slide the baseplate backwards a short distance and lift up. This action exposes an integrated ARRI dovetail slot on the bottom which can attach directly to any 2060 Dovetails, Safety Dovetails or Shoulder Rigs.
Wooden Camera PL Mount Modification Kit for Canon C300mkII Camera #262100
The Canon C300mkII PL Modification Kit allows users to convert their Canon C300mkII camera to PL Mount through a short modification process. All necessary tools are included in the kit. The PL Mount is made of aircraft grade aluminum and includes the PL port cap. Shims are provided with the kit for adjusting back focus and the appropriate shims are installed prior to shipping. Further adjustment should not be needed but can be checked using a wide angle lens and a focus chart.The modification process can be reversed! If you choose to go back to EF mount in the future, you can do it by reversing steps in the process. With this kit, the modification is performed by the user. Note 1. While the vast majority of lenses are compatible, due to the ND filter turret on the Canon C300mkII, lenses with a rear protrusion longer than 33.5mm, measured from the PL flange, are not compatible.2. This modification is not compatible with the C100, C100mkii, C200/200B, C300, C500 or C700.
Wooden Camera Unified BMPCC 4K Cage for Blackmagic Pocket Cinema Camera 4K
The Unified BMPCC4K Camera Cage is designed for the Blackmagic Pocket Cinema 4K camera and features a minimalist design that provides mounting points on the top and side while leaving all of the camera's vital controls on the right grip and left side easily viewable and accessible.The cage includes a reversible top handle in your choose of wood or rubber, which can be repositioned over the lens area when an XLR adapter is in use. Built into the handle is a cold shoe mount and a 15mm tube clamp for mounting any of our UVF Mount kits used with 3rd party electronic viewfinders. The handle can also fold down when packing your bag and can even be reconfigured onto the left, vertical 15mm rod for a secondary grip!The bottom portion of the cage includes a Manfrotto quick release dovetail which can attach to a variety of Manfrotto tripod heads. Quick release functionality works the same as existing Manfrotto plates. Simply turn the thumbscrew and depress the release pin to slide the plate backward out of the base.A built lens adapter support system is integrated into the base which is great for attaching to adapters with a 1/4"-20 on the bottom like our MFT to PL Mount Pro (1/4-20 Support Foot), and also many Metabones products.If lightweight 15mm support is desired, the cage may be combined with Wooden Camera's Unified DSLR 15mm Baseplate to provide pass through rod support (sold separately).
Wooden Camera Cage with Rubber Grip for Blackmagic Pocket Cinema 4K/6K Camera
The Unified BMPCC4K Camera Cage is designed for the Blackmagic Pocket Cinema 4K camera and features a minimalist design that provides mounting points on the top and side while leaving all of the camera's vital controls on the right grip and left side easily viewable and accessible. The cage includes a reversible rubber top handle, which can be repositioned over the lens area when an XLR adapter is in use. Built into the handle is a cold shoe mount and a 15mm tube clamp for mounting any of our UVF Mount kits used with 3rd party electronic viewfinders. The handle can also fold down when packing your bag and can even be reconfigured onto the left, vertical 15mm rod for a secondary grip! The bottom portion of the cage includes a Manfrotto quick release dovetail which can attach to a variety of Manfrotto tripod heads. Quick release functionality works the same as existing Manfrotto plates. Simply turn the thumbscrew and depress the release pin to slide the plate backward out of the base.A built lens adapter support system is integrated into the base which is great for attaching to adapters with a 1/4"-20 on the bottom like our MFT to PL Mount Pro and also many Metabones products. If lightweight 15mm support is desired, the cage may be combined with our Unified DSLR 15mm Baseplate to provide pass through rod support (sold separately).
Wooden Camera E-Mount to PL Mount Pro Adapter for Sony PXW-FS7 Camera #194000
The Wooden Camera E-Mount to PL Adapter Pro (FS7) is a shimmable Sony E-Mount to PL mount adapter that enables mounting of all PL mount lenses onto the Sony PXW-FS7 camera. In factory, set the flange focus to match a Sony FS7 camera. You only need to adjust the shims should you find that your camera is out of calibration. The adapter is shimmable by loosening six socket cap screws around the collar area, separating the two sections and adding color coded shims of various thickness. Back focus should be checked using collimation tools or a wide lens focused to infinity. Mount includes a support ring that integrates with the Top Plate (FS7), a highly recommended addition to this system. Loosen the support ring thumbscrew to quickly remove the mount and install another adapter. They are working on additional E-Mount to Canon, Nikon, etc. that will be available in the near future and will integrate with the same ring support.
Wooden Camera Cage NATO Arm Screw Set for Canon C100/C300/C500 Cameras, 12 Pack
Replacement screws for the Cage NATO Arm (C100, C300, C500).
Wooden Camera Handgrip, Right #219300
Wooden Camera Handgrip (Right) is an ergonomic wooden handgrip, carved from a solid piece of Sapele wood which is similar to Mahogany. Attaches by ARRI standard rosette and M6 threaded thumbscrew. It is possible to add start/stop trigger by purchasing the Trigger Box. Left hand version is also available! For attaching directly to rods, consider the 15mm Rod Clamp to ARRI Rosette and 19mm Rod Clamp to ARRI Rosette. Other useful items include the Rosette Arm and Rosette Arm (Short) which position the handgrip further out in front of you and the Rosette Spacer Standoff (Small) and (Large) for spacing grips off the camera body.
Wooden Camera - UVF Arm (8")
8" arm for the Universal EVF Mount.compact EVF setup great for handheld configuration
Wooden Camera - Ultra Arm Ball (1/4-20)
tool-less 1/4-20 screw knob with non-slip rubber pad25mm (1 inch) ball mountcompatible with Wooden Camera Ultra Arm lineup and existing 3rd party 25mm ball mountsAll Ultra Arm components are interchangeableGreat for attaching LCDs, lights, audio recorders and much more!Ultra Arm Ball (1/4-20) is a component of our Ultra Arm lineup which has a?tool-less 1/4-20 screw knob, non-slip rubber pad, and a 25mm (1 inch) ball. This can be combined with our Double Ball Clamp and other Ultra Arm accessories to build custom configurations! This component is also compatible with existing 3rd party 25mm ball mounts. Specifications: Weight:?45.3 g (0.1 lbs) Dimensions:?25.4 x?76.2 x 25.4 mm ( 1 x 3 x 1 in)
Wooden Camera Lightweight 15mm Bracket for RED Weapon #213800
Combine with Easy Riser Weapon for lightweight 15mm rods on RED Weapon at the correct lens height.
Wooden Camera 25mm (1") Gimbal ARRI Rosette Gear #219700
Gimbal ARRI Rosette (25mm, 1 inch) attaches to gimbal crossbars with a 25mm or 1 inch diameter like the DJI Ronin M and Movi M5, M10 and M15 and provides a threaded ARRI standard rosette for attaching handgrips. This is idea for handles with start/stop capabilities like their Wooden Camera Handgrip with Trigger Box and their Canon C300 Handgrip Relocator. 1/4-20 Threaded hole on the back for attaching a WC Magic Arm for holding an LCD screen or other accessories.
Wooden Camera Unified DSLR Cage Shoe Pincher Add-on #244300
Unified DSLR Cage Shoe Pincher Add-on provides hot shoe attachment functionality to any of our Unified DSLR Cages by creating a connection between the underside of the Unified DSLR Top Plate and DSLR hot shoe mount for a second point of contact and added security. Each of our Unified DSLR Cages offer two points in which to mount the Shoe Pincher Add-on, maximizing range for connecting to various cameras.
Wooden Camera 3/8"-16 Low Profile Screw #900010
3"/8-16 Low Profile Screw for use in products like Quick Base, Quick Riser, Dovetail Clamp, Quick Release Plate and more. Also works with many tripod plates.
Wooden Camera 30mm (1.18") Gimbal ARRI Rosette Gear #219800
Gimbal ARRI Rosette (30mm) attaches to gimbal crossbars with a 30mm diameter like the DJI Ronin and provides a threaded ARRI standard rosette for attaching handgrips. This is idea for handles with start/stop capabilities like their Wooden Camera Handgrip with Trigger Box and their Canon C300 Handgrip Relocator. 1/4-20 Threaded hole on the back for attaching a WC Magic Arm for holding an LCD screen or other accessories.
Wooden Camera Socket Cap Captured Screw Set for RED Weapon Easy Top, 4-Piece
The Wooden Camera Socket Cap Captured Screw Set is specially designed for RED Weapon Easy Top.
Wooden Camera A-Box Adapters for Alexa Mini Camera #207700
The Wooden Camera A-Box Adapters is Specially designed for Alexa Mini Camera
Wooden Camera WC Pro V-Mount Plate for Blackmagic URSA Mini, URSA Mini Pro, URSA
WC Pro V-Mount (Blackmagic URSA Mini, URSA Mini Pro, URSA) is a metal power plate, created in partnership with Anton Bauer, and has a rugged aluminum body for durability and secure battery mounting and a Blackmagic URSA Molex connector. Features 3x D-Taps for accessory power at battery voltage (12-16V), a digital fuse with reset button, rear cover plate, and captive mounting screws. Special Molex connector attaches directly to back of Blackmagic URSA and is covered by the plate eliminating external cabling.Should the user exceed the set current for accessories, only the accessory outputs are disabled leaving the camera running normally. Once the current load has been reduced by either removing accessories or reconfiguring, the reset button can be pressed to enable accessory power again.Please note that the BNC connectors and 4pin XLR DC input on the rear of the URSA Mini will be obscured when the two side D-Tap ports of the Pro power plate are in use
Wooden Camera VX Skateboard Camera Microphone #268700
VX Skateboard Camera Mic is a recreation of the Sony VX1000 microphone for use on modern cameras. 4 microphone capsules are arranged in the same orientation as the original VX1000 and a digital signal processor emulates the frequency filtering and compression. The included, coiled 3.5mm TRS cable connects the VX Mic to DSLRs, handycams, RED DSMC2 and other cameras with 3.5mm stereo inputs. Cameras with two XLR inputs require the VX Skateboard Camera Mic XLR Adapter Y Cable which is sold separately. Internal LiPo battery provides more than 48 hours of continuous operation and is charged using the included USB-C wall adapter. External USB power banks (not included) can be used to charge and power the mic at the same time. hoe mount on the bottom of the mic attaches to standard camera hot shoes and also has a center 1/4-20 for attaching to articulating arms like our Ultra Arms. If additional accessory mounting area is required, consider the VX Skateboard Camera Mic Horseshoe Mounting Bracket which provides two additional shoe mounts and a 1/4-20 screw on top.Why does this product matter? The Sony VX1000 was introduced in 1995 and changed the way skateboarding videos looked and sounded. The internal microphone design was particularly good at recording clear skateboard noises compared to previous Hi-8 cameras. Since the move to HD, there has been no standard for audio capture in skateboarding which is why no two skate videos sound the same. You might notice that recent videos have dumpy landing sounds when someone jumps down stairs or hollow grinding sounds when someone is on a ledge. This is because the microphones used are not ideal for the subject matter. Enter the VX Mic. Wooden Camera has reverse engineered the way the Sony VX1000 captures and processes audio and then packed it into a tiny and modern design. Let's make it sound like 1995 again.
Wooden Camera Arca Swiss Monitor Hinge for RED KOMODO Camera #280000
Monitor Hinge can attach into ARCA slot like the one found on Top Mount Only (RED KOMODO) which is sold separately. When combined with Top Mount, system provides a direct 1/4-20 mount for SmallHD monitors. Included rubber pad can be added for attaching third party monitors. A 15mm mounting spud is included and allows monitor arm to be quick released and attached onto Top Handle (RED KOMODO) which is also sold separately.
Wooden Camera - Ultra Arm Ball (3/8-16)
tool-less 3/8-16 screw knob with non-slip rubber pad25mm (1 inch) ball mountCompatible with Wooden Camera Ultra Arm lineup and existing 3rd party 25mm ball mountsAll Ultra Arm components are interchangeableGreat for attaching LCDs, lights, audio recorders and much more!Ultra Arm Ball (3/8-16) is a component of our Ultra Arm lineup which has atool-less 3/8-16screw knob, non-slip rubber pad, and a 25mm (1 inch) ball. Also included are two locating pins that can be installedturning it into an ARRI accessory mount compatible device!This can be combined with our Double Ball Clamp and other Ultra Arm accessories to build custom configurations. This component is also compatible with existing 3rd party 25mm ball mounts. Specifications: Weight: 45.3 g (0.1 lbs) Dimensions:25.4 x76.2 x 25.4 mm ( 1 x 3 x 1 in)
Wooden Camera Pro Gold-Mount Plate with 4-Pin XLR Right Angle Connector #260300
WC Pro Gold-Mount (4pin XLR Right Angle) is a metal power plate, created in partnership with Anton Bauer, and has a rugged aluminum body for durability and secure battery mounting and a right angle 4pin XLR. Compatible with Digital Bolex, Blackmagic Studio Camera, Sony F55/F5, Canon C500mkII and many more. Features 3x D-Taps for accessory power at battery voltage (12-16V), a digital fuse with reset button, rear cover plate, and captive mounting screws.Should the user exceed the set current for accessories, only the accessory outputs are disabled leaving the camera running normally. Once the current load has been reduced by either removing accessories or reconfiguring, the reset button can be pressed to enable accessory power again.16" cable exits the right side of the plate allowing easy insertion into the camera. Custom lengths available up to 6ft for no additional charge. Additional lengths available as needed.For an adjustable mount system attached to rods, use the Battery Slide or Recorder Slide paired with the appropriate Rod Clamp: Rod Clamp (15mm LW), Rod Clamp (15mm Studio), and Rod Clamp (19mm).
wooden camera red male pogo to female pogo lcd/evf cable 24", weapon/scarletw/raven
RED Male Pogo to Female Pogo LCD/EVF Cable (24") is a cable that allows the RED displays to be moved off the top of the RED Weapon/Scarlet-W/Raven and into a position more easily viewed. The male pogo connector attaches to the camera body without tools and the female pogo connector has a slotted design that can be bolted to any two 1/4-20 screws holes up to 54mm apart, center to center. 1/4-20 threaded holes are also found on the bottom of the female pogo connector for attaching to WC Magic Arms. The braided, flexible cable makes positioning easy and is great for gimbal use.
