35 keys RGB Colorful Backlight One-handed Gaming keyboard with usb converter interface for ps3 ps4 game

Product parameters:
Name: One-handed Gaming keyboard + converter
Product interface: USB 2.0
Press the number of keys: 35 keys
Key life: 20 million times
Product line length: 1.55 m(Braided wire)
Flash ROM: 32 bytes
EEPROM: Built-in 2K bytes
Operating voltage: VDD = 3.3V - 5.5V
Working current: 100mA
Ambient temperature: - 40 C - + 85 C
Programming temperature: 0 C - + 85 C
Lighting mode: RGB lighting, multiple lighting modes can be switched
Support Windows 2000 / XP / win7 / win8 / win10 / Vista 32bit, MAC, Android.
Product net weight: 357g
Product size: 2
5.3 *18* 3.7 cm
The keyboard backlight function is controlled as follows:
Fn+F3= 8 kinds of backlight mode switching (red light rarr; blue light rarr; green light rarr; purple light rarr; sky blue light rarr; yellow light rarr; white light rarr; rainbow light)
Fn+F4= Wave/Colorful Horse Race: Colorful color gradient running water.
The default wave mode. Press again to enter the colorful cycling horse mode.
Fn+F5= Backlight off/on, cycle switch.
FN+5 = Adjust the streamer speed to become faster
FN+6 = Adjust the streamer speed to slow down

1. Set keyboard and mouse functions
2. Connect the keyboard to the game console, and insert the corresponding original wired controller into the designated interface of the device
* Press ESC+SPACE on the keyboard at the same time to enter the mode of setting the keyboard and mouse button functions by yourself (the setting indicator lights up at this time).
* Press and hold the function button of the original handle
* Click the button on the keyboard or mouse to be set
* Release the original wired handle button
* At this time, the function of the button held down by the original handle is set to the pressed
keyboard or mouse button. (Original handle buttons function normally and will not be affected by this setting)
* After setting, press ESC+SPACE on the keyboard to save the current setting and exit the setting mode
* For example: press ESC+SPACE (space bar) to enter the setting mode, press and hold the A key of the original SWITCH handle, press the F key on the keyboard, and release the A key of the original
SWITCH handle. At this time, press the F key on the keyboard, and it will appear The function of the handle A key.
3. Cancel the function set by keyboard and mouse

Note:
* When setting the left and right joystick function of the original wired handle to the keyboard, the
direction of the joystick must be pushed to the end, and only the four directions of the joystick are set up,
down, left and right
* For the setting of the mouse, when the original wired joystick must be pushed to the end, the mouse
will slide in the corresponding direction and the mouse only supports the corresponding function of the
left and right joystick directions.
* The original handle cross keys support 8 directions setting
* During the setting process, if you do not hold down the original wired handle function key or push the joystick to the end, the original set function of the keyboard or mouse will be cleared
4. Mouse speed adjustment,Product support mouse Movement speed adjustment, the default is the third gear. DPI speed adjustment: ESC+CAPSLOCK+A/S/D/F/G (can be adjusted cyclically).
5. Mouse Y axis direction switch
The control of the Y-axis of some games is opposite to the setting value. The game operator can adjust the Y-axis direction of the mouse by pressing ECS+R according to their own needs.
6. Description of function switching
? Enter setting mode: ESC+SPACE
? Exit setting mode: ESC+SPACE

Precautions:
?If the keyboard does not work properly, check if the computer's PS/2 or USB. connector is normal or the keyboard cable is broken.
?Avoid using the mouse and keyboard in an environment with strong sunlight, overheating or severe dust.