The working condition of this item is one side cooling and one side heating.
The cooling side has characters, and the heating side is blank.
Must cool the heating side by using radiator or water cooling device, otherwise it will be burned. (must use thermal grease when water cooling or air cooling)
Power-on more than 2 seconds without using radiator will burn this plate, at user's own risk.
Only for those who know well or interested in this item.
Description:
Description
Working Temperature Range: -50°C ~ +80°C
Max Current: 6A (T h =30°C)
Max Voltage: 15V (T h =30°C)
Max Cooling Power: 59.1W (? T=0°C, T h =30°C)
Max Heating Power: 92.4W
Size: 40x40x 3.8 ± 0.1 mm
Temperature Difference Range: =68°C (Q c =0, T h =30°C)
Lead Length: about 300mm
Size: 40mm x 40mm x 3mm
Usage
This cooling plate is very simple to install and use.
Before installation, find a dry battery, connected to the two leads of the plate, in 1 second obviously you can feel the cool on one side and the heat on the other side.
DO NOT exceed 2 seconds if you haven't use cooling device on the heating side, it will damage the plate.
Ensure the electrodes of the leads and the sides of cool and heat.
If you want to get bigger cool, it is recommended that double-cooling mode, which is stack two plates together, the cooling side of 1st plate absorbs the heating side of 2nd plate, the experiments prove the cooling effect of two plates is better than just one.
Three will be more better, however, it will need a larger power supply support.