Ethernet LAN Wired Network Adapter Compatible with iPhone iPad iPod Running iOS 13,Works with Mouses Keyboards Hubs

?MADE FOR iOS 13?We recommend that you upgrade your iPad/iPhone to the latest iOS 13. The more open system supports wired/wireless mice and bidirectional import/export/edit/delete files. 2.Compatibility Compatible with iOS 10/11/12/13 iPhone 11/iPhone 11 Pro Max/iPhone X/ XS/ XR/ 8/ 8 Plus/ 7/ 7 Plus/ 6s/ 6s Plus/ 6/ 6 Plus iPad Air/Air2, iPad Pro 10.5-inch/ 12.9-inch (2nd Generation)/ 12.9-inch (1st Generation)/ 9.7-inch, iPad mini 4/ mini 3/ mini 2/ mini, iPod touch 5/6 etc. 3.Basic parameters: Operating Voltage:5.2V Charging Current:2A Length of Cable: 3.3ft/1m Ethernet Speed: 10Mbps/100Mbps 4.Interfaces: 1 * SD Card port (SD/SDXC/SDHC/RS-MMC/MMC Micro Card) 1 * Micro SD/T-Flash Card port (Micro SDXC/Micro SDHC/Micro SD Card) 1*RJ45 Ethernet port 2 * USB port (USB3.0) 1 * Male USB charging port How to Use? 1. Turn off Wi-Fi on your iPad or iPhone. 2. Insert your router-connected Ethernet cable into Ethernet port of our adapter, and connect the lightning end into your iPad or iPhone. 3. Go to"Setting" in your iPad or iPhone and the Ethernet settings will show up on your screen. 4. Click the "Ethernet" to obtain an IP address. 5. Open Safari and check if the connection is working. NOTES: 1.Q: Why iPhone/iPad prompts "This accessory is not supported",when connecting the adapter? A:-- Improper connection: Please pull out the adapter and reinsert. -- The phone case is too thick: Please remove the phone case and insert it again. 2. make sure your router-connected Ethernet cable is connected to the internet. 3. This adapter cannot implement self-dial access. It requires your router device to provide IP through the DHCP service. 4. This adapter is not compatible with devices with systems lower than iOS10.0. Before using, please upgrade your system to iOS 10.0 or higher.