CableMax CableMax Ethernet to RS232 9 Pin Dongle up to 230kbps
Supports TCP/IP / UDP / DHCP and HTTP protocols Allows up to twelve ( 12 ) simultaneous TCP-IP network connections Supports software handshaking ( XON / XOFF ) and hardware handshaking ( RTS / CTS ) Multiple Bridges can be used on the same network Transmission rate up to 230 Kbps The CableMax Ethernet to RS232 9 Pin Dongle is an Ethernet to RS-232 Serial Bridge. It may be used to connect any standard serial communications device such as a PC, and audio / video distribution system, industrial equipment, scientific instruments, etc., to an Ethernet network. It allows bi-directional communication between the two. It operates as both a network server and a client, which means it is able to both initiate and accept network connections. Once a network connection is made, the remote networked device or computer is virtually connected to the serial device on the other side of the Bridge. Both the network device and the serial device can send and receive messages to and from each other. Up to twelve network devices may be connected simultaneously. Data sent from any one of them is bridged to the serial port. Data received on the serial side is transmitted to all connected network devices. The bridge can send and receive both UDP and TCP packets. Features: Supports TCP/IP / UDP / DHCP and HTTP protocols Allows up to twelve ( 12 ) simultaneous TCP-IP network connections Transmission rate up to 230 Kbps Supports software handshaking ( XON / XOFF ) and hardware handshaking ( RTS / CTS ) Multiple Bridges can be used on the same network Integrated 802.3 compliant 10 / 100 Mbps network interface RS232, DB9M 9-pin serial port connection
CableMax USB Isolator 5000 Vrms Dongle
Medical and Industrial Application USB to USB Single Port Isolator up to Full Speed 12Mbps. USB isolator is USB bus powered and can provide 5V 320mA to your USB device with built-in isolated DC to DC converter. This is possible when the isolator is connected to a high power USB host port. USB Isolator protects your PC or Laptop while connecting USB peripherals which is wired to high voltages. It provides a high-voltage barrier for protection against surges, noise and ground loop errors. It is suitable for use in sensitive applications like automotive measurements. USB isolator provides a high - voltage isolation barrier between computer and it's connected USB device. The isolation protects equipment from electrical over-voltages and transient voltage spikes. By eliminates ground loop currents flowing between the PC and USB device which can cause damage and inaccurate measurements. Additionally, isolation minimizes conducted noise from static discharge, magnetic fields and radio frequency interference. Features USB isolation 5000V DC between USB host and USB device USB 2.0 compatible, 1.5Mbps low speed and 12Mbps full speed Bi-directional communication. Short circuit protected for x D+ and x D- lines. Isolated power supply in device through a DC-to-DC converter Class 3A contact ESD performance per ANSI / ESD STM5.1-2007 High common-mode transient immunity: >25 kV/us Supports Windows 98SE / ME / 2000 / XP / Vista / 7 / 8 and higher, Mac OS-8.6 and higher no driver installation required Isolation D+ & D- 5000V DC Power 3000V DC Transfer Rate 1.5 / 12 Mbps Connector Host USB Type A Male Device USB Type A Female Operating Temperature -20 C to 50 C Technical Information Cable Length: 3ft. Downstream Power Up to 320mA Power Mode Bus or Self Power Mode Dimension ( L x W x H ) 66 x 39 x 20mm UPC:736983900296SKU:ADIB00QU232UM
CableMax 6ft. USB 2.0 Docking Extension Cable
Easily accessible USB connectionFully compatible with PC and Macintosh systemsAttractive white for office or homeMagnetic styled base to provide stability for devices that need to be in an upright positionSupports low-speed 1.5 Mbps, full-speed 12 Mbps, and high-speed 480Mbps data speedsThe USB 2.0 docking extension cable extends the USB connection from your PC or Mac system up to 1.8 meters or 6ft. The USB 2.0 extension cable incorporates two distinct ports, one used for data and power, the other used for power only. The 6ft. USB 2.0 docking extension cable has a built-in magnetic base to provide a stable foundation when in use with stand up USB devices such as a USB powered light. Features: Supports low-speed 1.5 Mbps, full-speed 12 Mbps, and high-speed 480Mbps data speeds Supports connection of up to 127 different peripherals Easily accessible USB connection Fully compatible with PC and Macintosh systems Magnetic styled base to provide stability for devices that need to be in an upright position Attractive white for office or home
CableMax 1394 FireWire Cables 6-pin to 4-pin 3ft.
3ft. 6-pin to 4-pin 1394 Video Cable Apple FireWire and Sony i. LINK Compatible Supports High Digital Data transmissions of 400Mbps Plug-and-Play technology Hot Pluggable Easily attach to digital camcorders, VCRs and other audio/video components High-speed and capacity are an important part of the current innovation in computers, IEEE 1394 Firewire is a high-speed serial bus standard which bridges the worlds of consumer electronics and computers. This convergence allows users to easily attach digital camcorders, VCRs and other audio/video components to computers. IEEE 1394 Firewire delivers guaranteed bandwidth, transferring data in real time, eliminating any of your time critical data from being lost or corrupted. Features 3ft. 6-pin to 4-pin 1394 Video Cable Apple FireWire and Sony i. LINK (TM) Compatible Supports High Digital Data transmissions of 400Mbps Plug-and-Play technology Hot Pluggable Easily attach to digital camcorders, VCRs and other audio/video components
CableMax RS232 Null Modem DB9 Male to DB9 Female Port Protector
DB9 Male to DB9 Female Converts your serial cables to null modem cables Low profile port protector Reduces the strain on your computers serial port Protect against EMI/RFI interference The DB9 Male to DB9 Female Null Modem Adapter is low profile port protector converts your serial connection to a null modem connection. This adapter reduces the strain on your computers serial port, by connecting the port protector adapter into a cable end, it reduces the immediate pull on the port. This adapter is shielded to protect against EMI/RFI interference.
CableMax 6ft Molded SuperSpeed A to A Female USB 3.0 Extension Cable Black
Best Quality Fully Shielded and Molded 6ft. Long USB 3.0 Extension Cable Black A to A Female Super-Speed USB 3.0 Extension cable (A male to A female) offers a durable high quality connection that harnesses the full capability of the USB 3.0 standard. Designed for next-generation Super-Speed USB device connections delivering a throughput of up to 4.8Gbps when used with a USB 3.0 host and device - an astounding 10x the capability of USB 2.0 (480Mbps). All of our USB 3.0 cable features high quality Shielded Twisted Pair (STP) construction helping to prevent electromagnetic interference and ensuring reliable data communication.
CableMax USB to RS 232 Extender dongle - Extend up to 270FT via Cat5 Cable
Extends your serial signal via a standard CAT. 5/5e/6 UPT cable. Extends RS-232 signal by up to 270 feet. Supports full-duplex remote access and control of any RS-232 protocol device. Package contains a transmitter and remote receiver following RS-232 protocols. Controls serial devices remotely up to 90 meters The CableMax USB to RS-232 Cat. 5 extender is a low cost hardware solution that will extend your RS-232 devices using a single standard Cat. 5 / 5e / 6 UTP cable. It provides full-duplex remote access and control of any RS-232 protocol device. The USB to RS-232 Cat. 5 extender kit consists of a local transmitter and remote receiver. It provides you with a tremendous amount of flexibility in your installation. You can place RS-232 devices in any location you want and control them remotely up to 90 meters ( 270ft ). Features Extends serial signal up to 270ft. Uses Cat. 5 / 5e / 6 UPT cable from available USB port Supports Remote Access and Full Duplex control with any RS-232 device
CableMax USB 2.0 to SATA Cable Hard Drive Adapter with Power Adapter
This CableMax Adapter turns any SATA drive into a convenient external drive. Easily transfer files from computer or notebook back up files or store large file archives on hard drives. The Hi-Speed USB interface provides for easy installation with its Plug and Play design. The embedded command parser supports both SATA and ATAPI command set with LBA48-bit addressing capability. Fully Compliant with Gen1i Serial ATA II Electrical Specification 1.0 Supports SATA II Asynchronous Signal Recovery. Features Supports Data Transfer Rate of 480 Mbps High-Speed 12 Mbps Full-Speed and 1.5 Mbps Low-Speed Signal Bit Rate of up to 1.5 Gbps for SATA Supports Dual LUN (Logic Unit Number) with Automatic Master/Slave Enumeration Fully Compliant with USB Mass Storage Class Bulk-Only Transport Specification Supports SATA Spread-Spectrum Transmitter Supports Plug & Play Transfer rate Approx. 480 MBps (USB 2.0 ) Complies with USB 2.0 standards Compatible with any 2.5 3.5" 5.25" SATA device! Supports SATA I and SATA II Works with Windows Mac and Linux "
CableMax 6ft FireWire 400 6-Pin to 6-Pin Digital Equipment Cable
6 foot cable length IEEE 1394 Firewire Compliant Cable 400MBps Maximum Data Transmission Speed Computer to equipment cable (computer to VCR or other AV equipment) 80 degrees 30V working environment IEEE 1394 Firewire 6-Pin to 6-Pin Compatible 6 foot cable Features 6ft. long cable length IEEE 1394 Firewire Compliant Cable 400MBps Maximum Data Transmission Speed Computer to equipment cable (computer to VCR or other AV equipment) 80 degrees 30V working environment
CableMax 9-pin to 6-pin FireWire 800 - FireWire 400 Cables 6ft.
Connects 9-Pin or 6-Pin Firewire 800/400 6ft. Firewire 800/400 cable Supports 1394a and 1394b Will connect the 6-pin FireWire 400 port on a computer to a 9-pin FireWire 800 device Black Flexible 6ft. Firewire Cable 9-pin to 6-pin FireWire 800 - FireWire 400 cables (also known as Bilingual cables) The 9-pin to 6-pin FireWire 800 - FireWire 400 cable will connect a 6-pin FireWire 400 (1394a) device to a 9-pin FireWire 800 (1394b) port on a computer or will connect the 6-pin FireWire 400 port on a computer to a 9-pin FireWire 800 device.
CableMax Mini USB 2.0 to SATA adapter for all SATA and SATA II Hard Drives
SATA and IDE Hard Drive Adapter to USB 2.0 works with 2.5 3.5" and 5.25" Hard Drives and Optical Drives Ultimate USB to SATA Hard Drive Adapter IDE 2.5-in IDE 3.5-in adapter. This HI-Speed USB 2.0 to Serial ATA (SATA) Drive and IDE (PATA). This Adapter converts any Serial ATA (SATA) device (e.g. Hard Disk) or IDE device into a USB 2.0 Hot-Swap and HOT-PLUG USB 2.0 Device on any USB Compatible computer. Quickly Transfer files from computer Desktop or Laptop back-up files or store large file archives. Ultra Fast way to add another SATA or IDE device. The Hi-speed USB 2.0 interface provides an almost universal connection for any Windows or Macintosh workstation. The adapter supports all existing Serial ATA (SATA) drives or IDE (PATA) ATA-66/ATA-100/ATA-133 drives. Features Access any 2.5-in 3.5-in or 5.25 Serial ATA or 2.5-in or 3.5-in IDE drive through the Hi-Speed USB 2.0 port Compatible with any IDE or SATA drive of any brand or size 2A AC power supply ensures power for the most power-hungry devices Plug-N-Play - easy hot swapping Windows 98SE ME 2000 or XP. NO Drivers Need for XP and 2000 OS Mac OS X.3.4 or higher - Mac OS 10.4.x Specifications USB 2.0 to Serial ATA (SATA) or IDE Adapter Cable Connect any device with SATA or IDE interface to a PC with USB 2.0 Backwards compatible with USB 1 standard In The Case: SATA or IDE to USB 2.0 Adapter Converter Cable 2A Power Supply (100V to 240V Auto-Switching) and companion AC Cord Driver CD included for use with Windows 98SE only or Mac OS 8.6 to 9.x. 1 x Serial ATA data cable (1 feet long) 1 x 4-pin white molex to black Serial ATA (SATA) power cable (6 inches long) User's Guide "
CableMax USB to TTL 232R 3.3V FTDI 6FT Cable Open Tinned Wired End
FTDI USB to TTL 232R 3.3V Cable with Wired End The USB to TTL is a USB to UART cable using FTDI with +3.3V TTL level UART signals. It integrates FTDI's FT232RQ USB to serial UART interface chip which processes all the USB signaling and protocols. The cable is 6ft. long and provides a quick connection to devices with a TTL level serial interface to USB. The USB to TTL cable contains small circuit board utilizing the FTDI FT232R chip which is manufactured into the USB connector at end of the cable. The cable has non-terminated bare wires at other end that are tinned. The USB connector side of the cable is USB 2.0 high-speed specification compliant and USB 1.1 full speed compatible it also provides data transfer rates from 300baud to 3Mbaud at TTL levels. USB to TTL 3.3V Features Cable length: 6 feet UHCI/OHCI/EHCI host controller compatible Pre-Tinned bare wire at TTL end 24AWG 2 core and spiral cable USB to 3.3V TTL converter Data transfer rates from 300baud to 3Mbaud at TTL levels Connect directly to a micro-controller UART or I/O pins Low USB bandwidth consumption FCC and CE compliant Support for FT232R FTDI Chip-ID feature for improved security Operating temperature range from -40°C to 85°C Applications: COM networking industrial security and automotive The cable itself is very flexible and easy to work with in serial applications and can be compact for travel if needed.
CableMax 9-pin/9-pin Firewire (IEEE 1394b) 800 Mbps Cable - 3 Feet
Connectors: One End: 9-pin The Other End: 9-pin Data Transfer Rate: 800Mbps Supports Plug n Play operation Hot Pluggable Molded strain releif protects ensures years of trouble-free data transmissions Fully Shielded IEEE-1394b compliant FireWire 800 is the fastest serial technology yet developed for connecting peripheral devices to a computer or to each other. FireWire 800 cables include "Beta" and "Bilingual" versions. "Beta" refers to cables with 1394b 9 pin connectors on both ends. "Bilingual" refers to cables used to connect FireWire 800 to FireWire 400, and have a 9 pin connector on one end and a standard 6 or 4 pin on the other. Rated for higher speeds than standard firewire cables. Features Connectors: One End: 9-pin The Other End: 9-pin Data Transfer Rate: 800Mbps Supports Plug n Play operation Hot Pluggable Molded strain releif protects ensures years of trouble-free data transmissions Fully Shielded IEEE-1394b compliant Compatible with: PC, MAC
CableMax 10ft. Male to Male DB9 Data Cable, Serial Cable 9-Connductor Molded Shielded Cable
long Data cable for serial interface DB9 male to DB9 Male 9 conductors with Foil Shield and Drain Wire Molded Cable by CABLEMAX
CableMax 6ft. Male to Male DB9 Data Cable, Serial Cable 9-Connductor Molded Shielded Cable
long Data cable for serial interface DB9 male to DB9 Male 9 conductors with Foil Shield and Drain Wire Molded Cable by CABLEMAX
CableMax 3ft. Male to Male DB9 Data Cable, Serial Cable 9-Connductor Molded Shielded Cable
Data cable for serial interface DB9 male to DB9 Male 9 conductors with Foil Shield and Drain Wire Molded Cable by CableMax
CableMax FTDI USB to RS-232 / RS-422 / RS-485 Pro Grade Adapter Selectable via Software
USB to RS-232/422/485 Adapter The USB to serial interface adapter offers an easy way to connect a DB9 serial device to a USB port. All configuration and electrical interface selections are handled through the driver eliminating the need to open the enclosure to set jumpers or switches. The serial port is software configurable for RS-232 RS-422 and RS-485 with the electrical interface settings maintained locally allowing the host computer to be repaired or upgraded without re-configuring the serial port. Features and Specifications Full compliance with the USB Specification 2.0 & 1.1 RS-232 / RS-422 / RS-485 (Echo mode / Bias resister / Terminal resister) set up by Windows application program Bus powered no external power required Support 32 Node on the network High data rate up to 230 kbps (RS-232) ~ 3 M Baud (RS-422 or RS-485) ±15kV HBM ESD Protected DB-9 Male Pin Assignment RS-232 RS-422 RS-485 Chip FTDI 1 DCD TX- D- Data Rate RS-232 230 Kbps RS-422 / RS-485 3 M Baud LED 3 4 DTR RX- Connector Host USB Type A Male Device DB-9 Male 6 DSR RTS- Compliant USB Spec. 2.0 / 1.1 Housing Plastic Dimension ( L x W x H ) 66 x 39 x 20 mm OS Support for Windows 98 Me XP 2000 2003 CE Vista Windows 7 and Windows 8 Linux and Mac OS 10. X
10FT USB 2.0 High-Speed Type-A to B Right Angle Black Device Cable
10ft. Black USB 2.0 straight type-A host connector to right angle B connector for printers, scanners, or other USB device. The 10ft. USB cable is backward compatible with USB 1.1 specifications and uses shielded 28AWG/1P+24AWG/2C cable for its high-speed data activity. The USB connectors are molded into the cable's jacket protecting them from external damage and ensuring a stable connection between cable and connector.
USBGear USB to RS-485 Adapter W/Terminal Block Changer FTDI chip inside
Professional grade USB to RS485 Converter optimized for Windows 7/8 and Server 2003/2008. High-Speed and Interface compliance USB 1.1 2.0 3.0 EIA/TIA RS-485 USB USB to RS-485 adapter provides an extra Serial Com port via USB connection and can be configured to work with RS-485 peripherals such as POS and Industrial Control devices. USB Plug and Play feature supports an easy serial port expansion and requires no IRQ DMA or I/O port resources. USB adapter features a full set of RS-485 data and control signals on its DB-9 or terminal block Changer. It supports data transfer rates of up to 3M Baud. No external power supply is required as USB adapter takes its power from the USB bus. Features: Full compliance with the USB Specification 2.0 & 1.1 Support 256 Node on the network ±15kV HBM ESD Protected Data transfer rates 300 to 3M Baud. Supports remote wake-up and power management Compatible Windows 98SE / ME / 2000 / XP / Vista / 7 / 8 and higher Windows Server 2003 / 2008 / 2008R2 Win CE and Mac OS 8.6 Linux 1.5. 0 and higher. Changer adapter from DB-9F to 5 Pin Terminal block Specifications Chip: FTDI Operating Temp: 0 C ~ 40 C Storage Temp: -20 C ~ 60 C Humidity: 0~80% RH Non-condensing Compliant: USB spec. 2.0 / 1.1 Interface: RS-485 Connector: Host USB Type A Male Device: DB-9M / DB-9F to Terminal Block Power: Mode Bus Housing: Plastic
