CableMax USB to TTL 232R 3.3V FTDI 6FT Cable Open Tinned Wired End

FTDI USB to TTL 232R 3.3V Cable with Wired End

The USB to TTL is a USB to UART cable using FTDI with +3.3V TTL level UART signals. It integrates FTDI's FT232RQ USB to serial UART interface chip which processes all the USB signaling and protocols.

The cable is 6ft. long and provides a quick connection to devices with a TTL level serial interface to USB.

The USB to TTL cable contains small circuit board utilizing the FTDI FT232R chip which is manufactured into the USB connector at end of the cable. The cable has non-terminated bare wires at other end that are tinned. The USB connector side of the cable is USB 2.0 high-speed specification compliant and USB 1.1 full speed compatible it also provides data transfer rates from 300baud to 3Mbaud at TTL levels.

USB to TTL 3.3V Features

• Cable length: 6 feet
• UHCI/OHCI/EHCI host controller compatible
• Pre-Tinned bare wire at TTL end
• 24AWG 2 core and spiral cable
• USB to 3.3V TTL converter
• Data transfer rates from 300baud to 3Mbaud at TTL levels
• Connect directly to a micro-controller UART or I/O pins
• Low USB bandwidth consumption
• FCC and CE compliant
• Support for FT232R FTDI Chip-ID feature for improved security
• Operating temperature range from -40°C to 85°C
• Applications: COM networking industrial security and automotive

The cable itself is very flexible and easy to work with in serial applications and can be compact for travel if needed.