Buy HiFiBerry Products online in United States

HiFiBerry DAC+ RCA Version

Key Features: Well known DAC+ with a pair of RCA jacks Connects directly to the Raspberry Pi, no additional cables needed and no soldering! Offers high-end sound quality Compatible with all Raspberry Pi models with a 40-pin GPIO connector HiFiBerry DAC+ comes with a pair of RCA jacks. It can be simply plugged onto your Raspberry Pi, without any soldering. Equipped with a 192kHz/24bit Burr-Brown digital-to-analog converter it offers high-end sound quality. Item Specifics Weight: 20 g Dimensions: 5.5 & times; 6.5 & times; 1 cm Compatible with Raspberry Pi A+/B+/2B/3B/3B+/4B+/ZERO

hifiberry digi+ standard

The HiFiBerry Digi+ is a high-quality S/PDIF output board for the Raspberry Pi model A+/B+ and the new Raspberry Pi 2. It is designed as an add-on board that connects to the P1 and P5 header of the Raspberry Pi. Dedicated S/PDIF interface chip supports up to 192kHz/24bit resolution Optical (Toslink) and electrical outputs Bit-perfect output, audio data stream will not be modified in any way Connects directly to the Raspberry Pi, no additional cables needed No soldering. The Digi+ comes as a pre-fabricated kit. You just plug it onto the Raspberry Pi B+. The board conform to the Raspberry Pi hardware-attached-on-top (HAT) specification. That means it perfectly fits your Raspberry Pi B+. Directly powered from the Raspberry Pi, no additional power supply Optional: high-bandwidth output transformer provides full galvanic isolation of the electrical output (not in the standard version) Integrated EEPROM for automatic configuration (with write-protection). Note that this feature is still in development by the Raspberry Pi foundation. You will be able to upgrade your HiFiBerry DAC+ when it is officially available. The sound card already works without this feature. Comes with all components required to mount it. We include 4 M 2.5 x12mm spacers to fix the board onto the Raspberry Pi. Note about the compatibility with Raspberry Pi Model A and B: This board is only compatible with the Raspberry Pi model A+, B+ and 2B. Important note: While the hardware is able to output DTS/Dolby Digital, software has to be adapted to support this. We will support the developers to implement this. Unfortunately we can't guarantee that this feature will work with a specific software. Please ask the developers of the software if this is supported. Note that this model is not compatible with older Raspberry Pi model A and B units! UPC NO: 731236507284 SKU: ADIB0147RPBXC

HiFiBerry DAC2 Pro

Key Features: Stereo output and integrated headphone amplifier Can be equipped with an additional Digital Signal Processor (DSP) for flexible audio processing Dedicated 192kHz/24bit high-quality Burr-Brown DAC Connects directly to the Raspberry Pi, no additional cables needed and no soldering! Two ultra-low-noise linear voltage regulators for optimal audio performance The HiFiBerry DAC2 Pro is a high-resolution digital-to-analog and analog-to-digital converter for the Raspberry Pi (newer models with 40 pin GPIO connector). This is a special sound card for the Raspberry Pi, optimized for one specific use case: affordable high-quality audio playback. HiFiBerry DAC2 Pro is the successor of your popular DAC+ Pro. It comes with integrated dual-domain low-jitter clocks and gold-plated RCA connectors. It features and on-board headphone amplifier and can be upgraded with the DSP add-on module. Item Specifics Maximum output voltage: 2.1V rms DAC signal-to-noise ratio: 112db DAC THD+N: -93db Frequency response: 10Hz-70kHz Sample rates: 44.1 -192kHz Weight: 20 g Dimensions: 5.5 & times; 6.5 & times; 1 cm Compatible with Raspberry Pi A+/B+/2B/3B/3B+/4B+/ZERO

HiFiBerry Amp2

Key Features: A high-quality, highly efficient Class-D power amplifier for the Raspberry Pi. It powers the Raspberry Pi, there is no need to add an external 5V power supply to the Raspberry Pi. Works with all speakers or 4-8 Ohm impedance Supports sample rates from 44.1 -192kHz (16-32bit) Mount it onto the Raspberry Pi and you have a stereo audio system. You only have to connect your loudspeakers. It provides up to 60W power. You only need a single 12-24V power supply to power the Raspberry Pi and the Amp2. With 4 Ohm speakers, we recommend 12-18V. Higher operating voltages are only recommended with 8 Ohm speakers. However, even with 8 Ohm speakers an 18V power supply is the best choice in our opinion. The Amp2 integrated voltage converter is powerful enough to power even the new Raspberry Pi 4. Just note that it is not designed to power additional power-hungry USB devices or other hardware. There isn & rsquo; t a problem with low-power devices like mice, keyboards and similar. There might be even enough power for external hard disks, but the system might become unstable if too much additional current is drawn from the USB boards or the 5V rail on the GPIOs. Item Specifics Weight: 60 g Dimensions: 9 & times; 6 & times; 3 cm Compatible with Raspberry Pi A+/B+/2B/3B/3B+/4B+/ZERO

hifiberry dac+ rca version

The HiFiBerry DAC+ is a high-resolution digital-to-analog converter for the Raspberry Pi Model A+/B+ and 2B. This is a special sound card for the Raspberry Pi, that is optimized for one specific use case: the best audio playback quality. Dedicated 192kHz/24bit high-quality Burr-Brown DAC for best sound quality Hardware volume control. You can control the output volume using "alsamixer" or any application that supports ALSA mixer controls. Connects directly to the Raspberry Pi, no additional cables needed No soldering Comes as a pre-fabricated kit. You just plug it onto the Raspberry Pi B+, conform to the Raspberry Pi hardware-attached-on-top (HAT) specification. Compatible with Raspberry Pi model A+/B+ and 2 Directly powered from the Raspberry Pi, no additional power supply Ultra-low-noise voltage regulator for optimal audio performance Available with different output connectors: RCA or 3.5 mm phone jack Integrated EEPROM for automatic configuration (with write-protection). Note that this feature is still in development by the Raspberry Pi foundation. You will be able to upgrade your HiFiBerry DAC+ when it is officially available. The sound card already works without this feature. Comes with all components required to mount it. We include 4 M 2.5 x12mm spacers to fix the board onto the Raspberry Pi. Notice about the compatibility with Raspberry Pi Model A and B: This board is only compatible with the new Raspberry Pi Models A+/B+ and 2. UPC NO: 731236507291 SKU: ADIB0147RA2PY