FindTape Tack-It Sticky Note: Note Dispenser with Pastel Roll (Black Dispenser with Pastel Green Roll)
FindTape Tack-It Sticky Note Dispenser and Refill Rolls are adhesive paper rolls use to take repositionable notes. The paper is coated with a very good removable adhesive. Refill rolls include the standard classic pastel colors (green, orange, pink and yellow) and now also include four new neon colors (green, orange, pink and yellow). Technical Information - Core: 1-inch diameter - Backing/Carrier: paper
J.V. Converting Company, Inc.
JVCC SFOR80 Dark Orange Stretch Film: 0.008 in. thickness x 20 in. x 1666-0.67 yds. (Dark Orange)
JVCC SFOR80 Dark Orange Stretch Film is an 80 gauge machine stretch film rolls are 20 inches wide by 5000 feet long. Stretch film is used for palletizing, wrapping, and bundling of boxes, furniture, and carpeting. Applications include brick and block, warehouses, irregular loads, transportation industry, food distribution, bagged products, boxed products. 80 Gauge is the most common gauge or thickness in all stretch wrap and it can handle a variety of applications (good for loads up to around 2200 pounds). Made in the U.S. NOTES: As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.Technical Information- Backing/Carrier: 80 gauge film - Adhesive: N/A
J.V. Converting Company, Inc.
FindTape PKG Cardboard Boxes and Bubble Mailers: Duck Brand Bubble Cushioned White Poly Mailers #5 1PK
FindTape Corrugated Cardboard Boxes and Bubble Mailers are either 200-pound test cube-shaped boxes used for shipping and storage or bubble mailers which come from Duck Brand. If shipping the cardboard boxes, and not picking them up at our store, they will be shipped with flaps folded down. Technical Information - Holding Power to Fiberboard: 10, 000+ minutes
J.V. Converting Company, Inc.
JVCC PTU-25F UPVC Packaging Tape: 2 in. x 72 yds. (Fluorescent Orange)
JVCC PTU-25F UPVC Packaging Tape is a quiet unwind UPVC packaging tape used for carton sealing applications. It comes in a fluorescent orange color so is a great choice if you need a brightly colored choice which will clearly stand out. JVCC PTU-25F can also be used in office environments where a quieter unwind tape is desired (makes less noise when unwound than a polypropylene packaging tape would make). Use with a handheld dispenser to seal cartons with recycled fiber content, heavy ink coverage, wax coated, or rough surfaces. The tape is printable and heat shrinkable and can also be used on printed stock and recycled paper. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 48mm x 66m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.Technical Information- Core: 3 inch diameter - Backing/Carrier: unplasticized polyvinyl chloride (UPVC) film - Adhesive: solvent-based natural rubber - Thickness: 2.5 mils (carrier, adhesive) - Adhesion: 15 ounces per inch (to stainless steel test panel) - Tensile Strength: 42 pounds per inch (longitudinal) - Service/Operating Temperature: up to 158F - Elongation: 90 %
J.V. Converting Company, Inc.
JVCC OPP-20C Economy Grade Packaging Tape: 2 in x 110 yds. (Black)
JVCC OPP-20C Economy Grade Packaging Tape is a 28 micron polypropylene film packaging tape with a water-based acrylic adhesive. Packaging tape is used in a wide variety of applications and most commonly for sealing boxes and packages for shipment. OPP-20C is an economical choice for carton sealing and the colors add an extra benefit for color-coding and identification applications. The tape color is translucent, but the lighter colors like yellow allow you to better read writing underneath the tape. Available in 9 colors including black, blue, green, orange, pink, purple, red, white, and yellow. Please note that pink is only available in 110 yards (not 55 yards) rolls. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i. e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 48mm x 100m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e. g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Technical Information - Core: 3 inch diameter neutral - Backing/Carrier: 28 micron polypropylene film - Adhesive: water based acrylic - Thickness: 2 mils (carrier, adhesive) - Adhesion: 22 ounces per inch (to stainless steel test panel) - Tensile Strength: 18 pounds per inch (longitudinal) - Application Temperature: 32F (minimum) - Service/Operating Temperature: up to 140F - Elongation: 180 %
J.V. Converting Company, Inc.
JVCC 762-BD Bi-Directional Filament Strapping Tape: 3/4 in x 60 yds. (Natural)
JVCC 762-BD Bi-Directional Filament Strapping Tape is a fiberglass reinforced polypropylene tape which gives you 155# tensile strength in both directions (measures the tape's resistance to being broken apart as stress is applied). It is a high strength, cross bi-directional filament tape used for extremely demanding strapping, bundling and palletizing applications. High tear resistance makes it ideal for tabbing/seaming in the metal fabricating industry. Can also be used as project material for building out a Hexayurt shelter. Referred to as strapping tape or string tape. 762-BD bidi tape also helps to reduce the amount of tape needed for your project since it has filaments in both directions of the tape; traditional filament tape is one direction only. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i. e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 18mm x 55m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e. g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Warning: This product can expose you to chemicals including Toluene, which is [are] known to the State of California to cause birth defects or other reproductive harm. For more information go to www. P65Warnings. ca. gov/. Technical Information - Core: 3 inch diameter neutral - Backing/Carrier: fiberglass reinforced polypropylene film - Adhesive: synthetic rubber - Thickness: 4.7 mils (carrier, adhesive) - Adhesion: 91 ounces per inch (to stainless steel test panel) - Tensile Strength: 155 pounds per inch (longitudinal) 155 pounds per inch (transverse) - Elongation: 6 %
J.V. Converting Company, Inc.
JVCC SLPT20 Designer Packaging Tape: 2 in. x 75 ft. (Boat Flags)
JVCC SLPT20 Designer Packaging Tape offers custom designs or patterns printed on standard polypropylene (BOPP) film carton sealing tape. This tape is great for projects such as crafting, hooping, fashion and others; but is also exceptional at basic box and carton sealing or for just grabbing attention. The 'Color Bars' and 'Dashed-Line Road' versions are printed on colored film and are coated with an acrylic adhesive. All the other tapes are printed on clear or white film and are coated with a hot melt rubber adhesive. Please note there is an 8-1/2 inch gap between the scissor repeats on the 'Scissor Cut' pattern. Also, these designs are printed on standard packaging tape and will leave ink and adhesive residue behind if adhered to a floor, table or tile even for a short period of time. If using the 'Dashed-Line Road' pattern for Matchbox cars or LEGO cars on a surface you want to later remove it from please test it out first on an inconspicuous part of the surface and leave it on a few days to make sure you can remove it with adhesive cleaner and a strong bristle brush first as desired. Made in the U.S. NOTES: As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.Technical Information- Core: 3 inch diameter - Backing/Carrier: polypropylene (PP) film - Adhesive: rubber (All Others), acrylic (Color Bars, Dashed-Line Road) - Application Temperature: 54F to 110F - Service/Operating Temperature: 32F to 140F - Adhesion: 48 (rubber) 22 (acrylic) ounces per inch (to stainless steel) - Tensile Strength: 26 (rubber) 18 (acrylic) pounds per inch (longitudinal) - Thickness: 1.83 (All Others) 2.0 (Color Bars, Dashed-Line Road) mils (total)
J.V. Converting Company, Inc.
FindTape Tack-It Sticky Note: Note Dispenser with Pastel Roll (Black Dispenser with Pastel Pink Roll)
FindTape Tack-It Sticky Note Dispenser and Refill Rolls are adhesive paper rolls use to take repositionable notes. The paper is coated with a very good removable adhesive. Refill rolls include the standard classic pastel colors (green, orange, pink and yellow) and now also include four new neon colors (green, orange, pink and yellow). Technical Information - Core: 1-inch diameter - Backing/Carrier: paper
J.V. Converting Company, Inc.
JVCC BST-24 Bag Sealing Tape: 3/8 in x 180 yds. (Yellow)
JVCC BST-24 Bag Sealing Tape is used to seal polyethylene and other film bags swiftly and efficiently when used in a bag sealing dispenser. Also used for color coding age of perishables. JVCC BST-24 is a UPVC film coated with a solvent-based natural rubber adhesive. Typical bags that can be sealed include produce bags, bakery products, candy items, floral arrangements, industrial parts, newspapers, and hardware. The tape is also printable. Please note BST-24 is JVCC's product number for this specific item (stands for Bag Sealing Tape - 2.4 mils thick). NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i. e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 9mm wide. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e. g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Warning: This product can expose you to chemicals including Hexachlorobenzene (HCB), Polychlorinated biphenyls (PCB), which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www. P65Warnings. ca. gov/. Technical Information - Core: 3 inch diameter neutral - Backing/Carrier: unplasticized polyvinyl chloride (UPVC) film - Adhesive: solvent-based natural rubber - Thickness: 2.4 mils (carrier, adhesive) - Adhesion: 15 ounces per inch (to stainless steel test panel) - Tensile Strength: 42 pounds per inch (longitudinal) - Service/Operating Temperature: up to 176F - Elongation: 75 %
J.V. Converting Company, Inc.
JVCC FPPT-EG Economy-Grade Flatback Packaging Tape: 2 in. x 60 yds. (Brown)
JVCC FPPT-EG Economy-Grade Flatback Packaging Tape is a Kraft flatback paper tape coated with a rubber adhesive on one side. Used for general carton sealing and packaging applications. Please note the total thickness of this economy-grade tape is 1 mil thinner than other Flatback paper tapes such as Intertape 530 and JVCC FPPT-01. This difference in adhesive coat weight results in a slightly less adhesive tape than the two products previously mentioned. Complies with Postal Regulation for Uninsured Packages. Product is not repulpable. Made in the U.S. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 48mm x 55m. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.Technical Information- Core: 3 inch diameter - Backing/Carrier: kraft, flatback paper - Adhesive: rubber - Thickness: 6 mils (carrier, adhesive) - Tensile Strength: 45 pounds per inch (longitudinal) - Elongation: 8 %
J.V. Converting Company, Inc.
JVCC PP20 Printed Packaging Tape: 2 in x 110 yds. (White with "IF TAPE SEAL IS DISTURBED CHECK CONTENTS BEFORE SIGNING" printing)
JVCC PP20 Printed Packaging Tape is a white polypropylene packaging tape with message printing. It is used for carton sealing, splicing, and identification. JVCC Printed Packaging Tape uses a water-based acrylic adhesive. Imprinted legends include "FRAGILE HANDLE WITH CARE" and "IF TAPE SEAL IS DISTURBED CHECK CONTENTS BEFORE SIGNING. " Please see Shurtape HP-240 for a tape that includes a red STOP sign along with the text "If Seal Is Broken Or Package Damaged Check Contents Before Signing Receipt. " NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i. e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 48mm x 100m. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e. g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Technical Information - Core: 3 inch diameter neutral - Backing/Carrier: polypropylene (PP) film - Adhesive: water-based acrylic - Thickness: 2 mils (carrier, adhesive)
J.V. Converting Company, Inc.
JVCC 765P Premium Grade Filament Strapping Tape: 2 in. x 60 yds. (Natural)
JVCC 765P Premium Grade Filament Strapping Tape is a very high strength polyester backed unidirectional fiberglass filament reinforced tape coated with an aggressive and high shear resistant clear synthetic rubber adhesive. It's high strength and high adhesion to a variety of surfaces make this product suitable for high demand bundling and strength reinforcing applications. JVCC 765P Premium Grade Filament Strapping Tape is a pressure-sensitive tape used for several packaging functions such as closing corrugated fiberboard boxes, reinforcing packages, bundling items, pallet unitizing, etc. The strapping tape can be used to reinforce a heavy box, by running strips of tape around the box to help hold it together. There are some other innovative uses for strapping tape, including quickie book repair, in which the tape can be used to create a snug and flexible spine for a damaged book, and securing bundles of loose objects such as curtain rods for transit. Made in the U.S. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 48mm x 55m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.Technical Information- Core: 3 inch diameter neutral - Backing/Carrier: fiberglass filament reinforced polyester film - Adhesive: synthetic rubber - Standards Met: ASTM D5330 Type II (replaces PPP-T-97E, Type II) - Thickness: 7.5 mils (carrier, adhesive) - Adhesion: 40 ounces per inch (to stainless steel test panel) - Tensile Strength: 330 pounds per inch (longitudinal) - Elongation: 4.5 %
J.V. Converting Company, Inc.
JVCC 762-BD Bi-Directional Filament Strapping Tape: 6 in x 60 yds. / White (Opaque)
JVCC 762-BD Bi-Directional Filament Strapping Tape is a fiberglass reinforced polypropylene tape which gives you 155# tensile strength in both directions (measures the tape's resistance to being broken apart as stress is applied). It is a high strength, cross bi-directional filament tape used for extremely demanding strapping, bundling and palletizing applications. High tear resistance makes it ideal for tabbing/seaming in the metal fabricating industry. Can also be used as project material for building out a Hexayurt shelter. Referred to as strapping tape or string tape. 762-BD bidi tape also helps to reduce the amount of tape needed for your project since it has filaments in both directions of the tape; traditional filament tape is one direction only. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i. e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 144mm x 55m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e. g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Warning: This product can expose you to chemicals including Toluene, which is [are] known to the State of California to cause birth defects or other reproductive harm. For more information go to www. P65Warnings. ca. gov/. Technical Information - Core: 3 inch diameter neutral - Backing/Carrier: fiberglass reinforced polypropylene film - Adhesive: synthetic rubber - Thickness: 4.7 mils (carrier, adhesive) - Adhesion: 91 ounces per inch (to stainless steel test panel) - Tensile Strength: 155 pounds per inch (longitudinal) 155 pounds per inch (transverse) - Elongation: 6 %
J.V. Converting Company, Inc.
JVCC BST-24 Bag Sealing Tape: 3/8 in x 180 yds. (Orange)
JVCC BST-24 Bag Sealing Tape is used to seal polyethylene and other film bags swiftly and efficiently when used in a bag sealing dispenser. Also used for color coding age of perishables. JVCC BST-24 is a UPVC film coated with a solvent-based natural rubber adhesive. Typical bags that can be sealed include produce bags, bakery products, candy items, floral arrangements, industrial parts, newspapers, and hardware. The tape is also printable. Please note BST-24 is JVCC's product number for this specific item (stands for Bag Sealing Tape - 2.4 mils thick). NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i. e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 9mm wide. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e. g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Warning: This product can expose you to chemicals including Hexachlorobenzene (HCB), Polychlorinated biphenyls (PCB), which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www. P65Warnings. ca. gov/. Technical Information - Core: 3 inch diameter neutral - Backing/Carrier: unplasticized polyvinyl chloride (UPVC) film - Adhesive: solvent-based natural rubber - Thickness: 2.4 mils (carrier, adhesive) - Adhesion: 15 ounces per inch (to stainless steel test panel) - Tensile Strength: 42 pounds per inch (longitudinal) - Service/Operating Temperature: up to 176F - Elongation: 75 %
J.V. Converting Company, Inc.
JVCC FPPT-01 Kraft Flatback Paper Packaging Tape: 3/8 in x 60 yds. (Brown)
JVCC FPPT-01 Kraft Flatback Paper Packaging Tape is a brown color kraft flatback paper coated with a natural/synthetic rubber blend adhesive system. Good for carton sealing applications, moderate demand splicing applications, tabbing and/or core starting. Complies with Postal Regulation for Uninsured Packages. May be used in picture framing applications to seal back of frame/artwork due to its ability to stick to its own backing. This tape is a pressure-sensitive adhesive tape and does not need water to activate it like a gummed paper tape. The tape is hand-tearable and is not repulpable. This tape has a more matte (less shiny) surface than Shurtape FP-96 Kraft paper tape. Also please note that since this is a very soft tape you will oftentimes see gapping and pressure points along the side of the rolls once it is cut to width; however, this will not affect the performance of the tape. Made in the U. S. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i. e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 9mm x 55m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e. g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Technical Information - Core: 3 inch diameter - Backing/Carrier: flatback paper - Adhesive: natural/synthetic rubber blend - Standards Met: PPP-T-42C, Type II; CID A-A-883B, Type II - Thickness: 7.3 mils (carrier, adhesive) - Adhesion: 58 ounces per inch (to stainless steel test panel) - Tensile Strength: 46 pounds per inch (longitudinal) - Service/Operating Temperature: 40F to 175F - Elongation: 7 %
J.V. Converting Company, Inc.
FindTape PKG Cardboard Boxes and Bubble Mailers: Duck Brand Bubble Cushioned White Poly Mailers #2 1PK
FindTape Corrugated Cardboard Boxes and Bubble Mailers are either 200-pound test cube-shaped boxes used for shipping and storage or bubble mailers which come from Duck Brand. If shipping the cardboard boxes, and not picking them up at our store, they will be shipped with flaps folded down. Technical Information - Holding Power to Fiberboard: 10, 000+ minutes
J.V. Converting Company, Inc.
JVCC OPP-20C Economy Grade Packaging Tape: 2 in x 110 yds. (White)
JVCC OPP-20C Economy Grade Packaging Tape is a 28 micron polypropylene film packaging tape with a water-based acrylic adhesive. Packaging tape is used in a wide variety of applications and most commonly for sealing boxes and packages for shipment. OPP-20C is an economical choice for carton sealing and the colors add an extra benefit for color-coding and identification applications. The tape color is translucent, but the lighter colors like yellow allow you to better read writing underneath the tape. Available in 9 colors including black, blue, green, orange, pink, purple, red, white, and yellow. Please note that pink is only available in 110 yards (not 55 yards) rolls. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i. e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 48mm x 100m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e. g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Technical Information - Core: 3 inch diameter neutral - Backing/Carrier: 28 micron polypropylene film - Adhesive: water based acrylic - Thickness: 2 mils (carrier, adhesive) - Adhesion: 22 ounces per inch (to stainless steel test panel) - Tensile Strength: 18 pounds per inch (longitudinal) - Application Temperature: 32F (minimum) - Service/Operating Temperature: up to 140F - Elongation: 180 %
J.V. Converting Company, Inc.
JVCC BST-22 Bag Sealing Tape: 3/8 in x 180 yds. (Tan)
JVCC BST-22 Bag Sealing Tape is a UPVC film coated with a solvent-based natural rubber adhesive. It is used for bag sealing, produce packaging, can sealing and bundling. The tape is also printable. Please note BST-22 is JVCC's product number for this specific item (stands for Bag Sealing Tape - 2.2 mils thick). NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i. e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 9mm wide. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e. g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Warning: This product can expose you to chemicals including Hexachlorobenzene (HCB), Polychlorinated biphenyls (PCB), which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www. P65Warnings. ca. gov/. Technical Information - Core: 3 inch diameter neutral - Backing/Carrier: unplasticized polyvinyl chloride (UPVC) film - Adhesive: solvent based natural rubber - Thickness: 2.2 mils (carrier, adhesive) - Adhesion: 15 ounces per inch (to stainless steel test panel) - Tensile Strength: 42 pounds per inch (longitudinal) - Service/Operating Temperature: up to 176F - Elongation: 75 %
J.V. Converting Company, Inc.
JVCC TPS-01 Light Duty Tensilized Polypropylene Strapping Tape: 1 in. x 60 yds. (Black)
JVCC TPS-01 Light Duty Tensilized Polypropylene Strapping Tape is a general purpose tensilized MOPP (Monoaxially-Oriented Polypropylene) tape featuring a high strength adhesive. It keeps boxes from shifting in transit, reinforces packaging bearing significant weight, and much more. JVCC TPS-01 is used for palletizing, bundling, and unitizing corrugated and paperboard boxes. When properly applied the tape will shrink around loads and hold them tight. It has good initial tack and high shear resistance. JVCC TPS-01 Light Duty Tensilized Polypropylene Strapping Tape impact strength allows give and take without snapping. Made in the U.S. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 24mm x 55m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.Technical Information- Core: 3 inch diameter neutral - Backing/Carrier: polypropylene (PP) film - Adhesive: rubber - Thickness: 2.8 mils (carrier, adhesive) - Adhesion: 32 ounces per inch (to stainless steel test panel) - Tensile Strength: 97 pounds per inch (longitudinal) - Application Temperature: 32F to 150F - Service/Operating Temperature: -60F to 200F - Elongation: 35 %
J.V. Converting Company, Inc.
JVCC OPP-20C Economy Grade Packaging Tape: 2 in x 110 yds. (Orange)
JVCC OPP-20C Economy Grade Packaging Tape is a 28 micron polypropylene film packaging tape with a water-based acrylic adhesive. Packaging tape is used in a wide variety of applications and most commonly for sealing boxes and packages for shipment. OPP-20C is an economical choice for carton sealing and the colors add an extra benefit for color-coding and identification applications. The tape color is translucent, but the lighter colors like yellow allow you to better read writing underneath the tape. Available in 9 colors including black, blue, green, orange, pink, purple, red, white, and yellow. Please note that pink is only available in 110 yards (not 55 yards) rolls. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i. e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 48mm x 100m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e. g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Technical Information - Core: 3 inch diameter neutral - Backing/Carrier: 28 micron polypropylene film - Adhesive: water based acrylic - Thickness: 2 mils (carrier, adhesive) - Adhesion: 22 ounces per inch (to stainless steel test panel) - Tensile Strength: 18 pounds per inch (longitudinal) - Application Temperature: 32F (minimum) - Service/Operating Temperature: up to 140F - Elongation: 180 %
J.V. Converting Company, Inc.
JVCC TEV-ST Tamper Evident Carton Sealing Tape: 1/2 in. x 55 yds. (Surface Printed Red with "OPENED VOID" message if removed)
JVCC TEV-ST Tamper Evident Carton Sealing Tape is a premium security packaging tape. A hidden message, "OPENED VOID" is deposited on the container if the tape is tampered with or removed. Unlike other tamper-evident tapes, TEV-ST has instant initial grab and can be removed immediately to show the hidden invisible legend. This type of tape discourages tampering and pilfering of the contents of the sealed cardboard carton. JVCC TEV-ST is made with a matted polyester backing for high-strength and has a solvent-based acrylic adhesive for all-weather adhesion. The tape either comes surface printed with "SECURITY TAPE" printed on the top side of the tape or a few sizes can be purchased in solid red or tan with no printing on the top side of the tape. JVCC TEV-ST Tamper Evident Carton Sealing Tape is useful in applications such as pharmaceuticals, chemical, electronic, medical, crime evidence, currency handlers, and any transportation of high cost or sensitive items. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 12mm x 50m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.Technical Information- Core: 3 inch diameter - Backing/Carrier: polyester (PET) film - Adhesive: solvent-based acrylic - Thickness: 3.9 mils (carrier, adhesive) - Adhesion: 35 ounces per inch (to stainless steel test panel)
J.V. Converting Company, Inc.
JVCC OPP-22CC Crystal Clear Packaging Tape: 2 in. x 55 yds. (Clear)
JVCC OPP-22CC Crystal Clear Carton Sealing Tape is a 2.2 mil biaxially oriented polypropylene film tape coated with a solvent-based acrylic adhesive. See-through "CRYSTAL CLEAR" imprinted on 3-inch diameter core. Crystal clear tape is non-yellowing and UV resistant with a long shelf life. Used for carton sealing. May also be used for lamination and in cold temperature applications. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 48mm x 50m. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Warning: This product can expose you to chemicals including Benzene, which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.Technical Information- Core: 3 inch diameter - Backing/Carrier: 28 micron biaxially-oriented polypropylene (BOPP) film - Adhesive: solvent based acrylic - Standards Met: CID A-A-1684C - Thickness: 2.2 mils (carrier, adhesive) - Adhesion: 27 ounces per inch (to stainless steel test panel) - Tensile Strength: 20 pounds per inch (longitudinal) - Service/Operating Temperature: 32F to 140F - Elongation: 140 %
J.V. Converting Company, Inc.
JVCC 765P Premium Grade Filament Strapping Tape: 3 in. x 60 yds. (Natural)
JVCC 765P Premium Grade Filament Strapping Tape is a very high strength polyester backed unidirectional fiberglass filament reinforced tape coated with an aggressive and high shear resistant clear synthetic rubber adhesive. It's high strength and high adhesion to a variety of surfaces make this product suitable for high demand bundling and strength reinforcing applications. JVCC 765P Premium Grade Filament Strapping Tape is a pressure-sensitive tape used for several packaging functions such as closing corrugated fiberboard boxes, reinforcing packages, bundling items, pallet unitizing, etc. The strapping tape can be used to reinforce a heavy box, by running strips of tape around the box to help hold it together. There are some other innovative uses for strapping tape, including quickie book repair, in which the tape can be used to create a snug and flexible spine for a damaged book, and securing bundles of loose objects such as curtain rods for transit. Made in the U.S. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 72mm x 55m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.Technical Information- Core: 3 inch diameter neutral - Backing/Carrier: fiberglass filament reinforced polyester film - Adhesive: synthetic rubber - Standards Met: ASTM D5330 Type II (replaces PPP-T-97E, Type II) - Thickness: 7.5 mils (carrier, adhesive) - Adhesion: 40 ounces per inch (to stainless steel test panel) - Tensile Strength: 330 pounds per inch (longitudinal) - Elongation: 4.5 %
J.V. Converting Company, Inc.
JVCC BST-22 Bag Sealing Tape: 3/8 in x 180 yds. (Clear)
JVCC BST-22 Bag Sealing Tape is a UPVC film coated with a solvent-based natural rubber adhesive. It is used for bag sealing, produce packaging, can sealing and bundling. The tape is also printable. Please note BST-22 is JVCC's product number for this specific item (stands for Bag Sealing Tape - 2.2 mils thick). NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i. e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 9mm wide. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e. g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Warning: This product can expose you to chemicals including Hexachlorobenzene (HCB), Polychlorinated biphenyls (PCB), which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www. P65Warnings. ca. gov/. Technical Information - Core: 3 inch diameter neutral - Backing/Carrier: unplasticized polyvinyl chloride (UPVC) film - Adhesive: solvent based natural rubber - Thickness: 2.2 mils (carrier, adhesive) - Adhesion: 15 ounces per inch (to stainless steel test panel) - Tensile Strength: 42 pounds per inch (longitudinal) - Service/Operating Temperature: up to 176F - Elongation: 75 %
J.V. Converting Company, Inc.
JVCC OPP-26C Premium Grade Colored Packaging Tape: 3 in. (72mm actual) x 72 yds. (Yellow)
JVCC OPP-26C Premium Grade Colored Packaging Tape consists of a high-quality solvent-based acrylic adhesive and a strong film which makes this tape an excellent choice for demanding carton sealing, splicing, and color-coding applications. Extra thickness allows for one strip sealing which provides for a cleaner look when applying colored tape. The tape comes in 5 translucent colors so for the lighter colors objects can be seen underneath. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 72mm x 66m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Warning: This product can expose you to chemicals including Benzene, which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.Technical Information- Core: 3 inch diameter neutral - Backing/Carrier: 40 micron polypropylene film - Adhesive: solvent based acrylic - Thickness: 2.7 mils (carrier, adhesive) - Adhesion: 29 ounces per inch (to stainless steel test panel) - Tensile Strength: 24 pounds per inch (longitudinal) - Service/Operating Temperature: 32F to 150F - Elongation: 150 %
J.V. Converting Company, Inc.
JVCC OPP-26C Premium Grade Colored Packaging Tape: 3 in. (72mm actual) x 72 yds. (Green)
JVCC OPP-26C Premium Grade Colored Packaging Tape consists of a high-quality solvent-based acrylic adhesive and a strong film which makes this tape an excellent choice for demanding carton sealing, splicing, and color-coding applications. Extra thickness allows for one strip sealing which provides for a cleaner look when applying colored tape. The tape comes in 5 translucent colors so for the lighter colors objects can be seen underneath. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 72mm x 66m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Warning: This product can expose you to chemicals including Benzene, which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.Technical Information- Core: 3 inch diameter neutral - Backing/Carrier: 40 micron polypropylene film - Adhesive: solvent based acrylic - Thickness: 2.7 mils (carrier, adhesive) - Adhesion: 29 ounces per inch (to stainless steel test panel) - Tensile Strength: 24 pounds per inch (longitudinal) - Service/Operating Temperature: 32F to 150F - Elongation: 150 %
J.V. Converting Company, Inc.
JVCC OPP-20C Economy Grade Packaging Tape: 2 in x 55 yds. (Orange)
JVCC OPP-20C Economy Grade Packaging Tape is a 28 micron polypropylene film packaging tape with a water-based acrylic adhesive. Packaging tape is used in a wide variety of applications and most commonly for sealing boxes and packages for shipment. OPP-20C is an economical choice for carton sealing and the colors add an extra benefit for color-coding and identification applications. The tape color is translucent, but the lighter colors like yellow allow you to better read writing underneath the tape. Available in 9 colors including black, blue, green, orange, pink, purple, red, white, and yellow. Please note that pink is only available in 110 yards (not 55 yards) rolls. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i. e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 48mm x 50m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e. g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Technical Information - Core: 3 inch diameter neutral - Backing/Carrier: 28 micron polypropylene film - Adhesive: water based acrylic - Thickness: 2 mils (carrier, adhesive) - Adhesion: 22 ounces per inch (to stainless steel test panel) - Tensile Strength: 18 pounds per inch (longitudinal) - Application Temperature: 32F (minimum) - Service/Operating Temperature: up to 140F - Elongation: 180 %
J.V. Converting Company, Inc.
JVCC TPS-01 Light Duty Tensilized Polypropylene Strapping Tape: 3/4 in. x 60 yds. (Black)
JVCC TPS-01 Light Duty Tensilized Polypropylene Strapping Tape is a general purpose tensilized MOPP (Monoaxially-Oriented Polypropylene) tape featuring a high strength adhesive. It keeps boxes from shifting in transit, reinforces packaging bearing significant weight, and much more. JVCC TPS-01 is used for palletizing, bundling, and unitizing corrugated and paperboard boxes. When properly applied the tape will shrink around loads and hold them tight. It has good initial tack and high shear resistance. JVCC TPS-01 Light Duty Tensilized Polypropylene Strapping Tape impact strength allows give and take without snapping. Made in the U.S. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 18mm x 55m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.Technical Information- Core: 3 inch diameter neutral - Backing/Carrier: polypropylene (PP) film - Adhesive: rubber - Thickness: 2.8 mils (carrier, adhesive) - Adhesion: 32 ounces per inch (to stainless steel test panel) - Tensile Strength: 97 pounds per inch (longitudinal) - Application Temperature: 32F to 150F - Service/Operating Temperature: -60F to 200F - Elongation: 35 %
J.V. Converting Company, Inc.
JVCC 765P Premium Grade Filament Strapping Tape: 3/4 in. x 60 yds. (Natural)
JVCC 765P Premium Grade Filament Strapping Tape is a very high strength polyester backed unidirectional fiberglass filament reinforced tape coated with an aggressive and high shear resistant clear synthetic rubber adhesive. It's high strength and high adhesion to a variety of surfaces make this product suitable for high demand bundling and strength reinforcing applications. JVCC 765P Premium Grade Filament Strapping Tape is a pressure-sensitive tape used for several packaging functions such as closing corrugated fiberboard boxes, reinforcing packages, bundling items, pallet unitizing, etc. The strapping tape can be used to reinforce a heavy box, by running strips of tape around the box to help hold it together. There are some other innovative uses for strapping tape, including quickie book repair, in which the tape can be used to create a snug and flexible spine for a damaged book, and securing bundles of loose objects such as curtain rods for transit. Made in the U.S. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 18mm x 55m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.Technical Information- Core: 3 inch diameter neutral - Backing/Carrier: fiberglass filament reinforced polyester film - Adhesive: synthetic rubber - Standards Met: ASTM D5330 Type II (replaces PPP-T-97E, Type II) - Thickness: 7.5 mils (carrier, adhesive) - Adhesion: 40 ounces per inch (to stainless steel test panel) - Tensile Strength: 330 pounds per inch (longitudinal) - Elongation: 4.5 %
J.V. Converting Company, Inc.
JVCC OPP-26C Premium Grade Colored Packaging Tape: 2 in. x 72 yds. (White)
JVCC OPP-26C Premium Grade Colored Packaging Tape consists of a high-quality solvent-based acrylic adhesive and a strong film which makes this tape an excellent choice for demanding carton sealing, splicing, and color-coding applications. Extra thickness allows for one strip sealing which provides for a cleaner look when applying colored tape. The tape comes in 5 translucent colors so for the lighter colors objects can be seen underneath. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 48mm x 66m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Warning: This product can expose you to chemicals including Benzene, which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.Technical Information- Core: 3 inch diameter neutral - Backing/Carrier: 40 micron polypropylene film - Adhesive: solvent based acrylic - Thickness: 2.7 mils (carrier, adhesive) - Adhesion: 29 ounces per inch (to stainless steel test panel) - Tensile Strength: 24 pounds per inch (longitudinal) - Service/Operating Temperature: 32F to 150F - Elongation: 150 %
J.V. Converting Company, Inc.
JVCC PES-32G Polyester Film Packaging Tape: 6 in x 60 yds. (Clear)
JVCC PES-32G Polyester Film Packaging Tape is a heavy-duty polyester film packaging tape used to meet the highest of quality & performance requirements. It is used for packaging, sealing, and splicing. This tape features extremely aggressive hot melt rubber-based adhesive that ensures instant holding power and provides a quick reliable seal when used for strip closure of regular slotted containers, overlap sealing, and fiber drum sealing. This polyester carton sealing tape is used for government packaging since it doesn't stretch or elongate like standard BOPP film packaging tape does. Made in the U. S. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i. e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 144mm x 55m. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e. g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Technical Information - Core: 3 inch diameter - Backing/Carrier: polyester (PET) film - Adhesive: hot met/synthetic rubber resin - Thickness: 3 mils (carrier, adhesive) 2 mils (carrier) - Adhesion: 65 ounces per inch (to stainless steel test panel) - Tensile Strength: 55 pounds per inch (longitudinal) - Application Temperature: -10F to 120F - Service/Operating Temperature: -45F to 140F - Elongation: 100 %
J.V. Converting Company, Inc.
JVCC FPPT-01 Kraft Flatback Paper Packaging Tape: 1-1/2 in x 60 yds. (Brown)
JVCC FPPT-01 Kraft Flatback Paper Packaging Tape is a brown color kraft flatback paper coated with a natural/synthetic rubber blend adhesive system. Good for carton sealing applications, moderate demand splicing applications, tabbing and/or core starting. Complies with Postal Regulation for Uninsured Packages. May be used in picture framing applications to seal back of frame/artwork due to its ability to stick to its own backing. This tape is a pressure-sensitive adhesive tape and does not need water to activate it like a gummed paper tape. The tape is hand-tearable and is not repulpable. This tape has a more matte (less shiny) surface than Shurtape FP-96 Kraft paper tape. Also please note that since this is a very soft tape you will oftentimes see gapping and pressure points along the side of the rolls once it is cut to width; however, this will not affect the performance of the tape. Made in the U. S. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i. e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 36mm x 55m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e. g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Technical Information - Core: 3 inch diameter - Backing/Carrier: flatback paper - Adhesive: natural/synthetic rubber blend - Standards Met: PPP-T-42C, Type II; CID A-A-883B, Type II - Thickness: 7.3 mils (carrier, adhesive) - Adhesion: 58 ounces per inch (to stainless steel test panel) - Tensile Strength: 46 pounds per inch (longitudinal) - Service/Operating Temperature: 40F to 175F - Elongation: 7 %
J.V. Converting Company, Inc.
JVCC OPP-26C Premium Grade Colored Packaging Tape: 2 in. x 72 yds. (Green)
JVCC OPP-26C Premium Grade Colored Packaging Tape consists of a high-quality solvent-based acrylic adhesive and a strong film which makes this tape an excellent choice for demanding carton sealing, splicing, and color-coding applications. Extra thickness allows for one strip sealing which provides for a cleaner look when applying colored tape. The tape comes in 5 translucent colors so for the lighter colors objects can be seen underneath. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 48mm x 66m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Warning: This product can expose you to chemicals including Benzene, which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.Technical Information- Core: 3 inch diameter neutral - Backing/Carrier: 40 micron polypropylene film - Adhesive: solvent based acrylic - Thickness: 2.7 mils (carrier, adhesive) - Adhesion: 29 ounces per inch (to stainless steel test panel) - Tensile Strength: 24 pounds per inch (longitudinal) - Service/Operating Temperature: 32F to 150F - Elongation: 150 %
J.V. Converting Company, Inc.
JVCC PP20 Printed Packaging Tape: 2 in x 110 yds. (White with Red "FRAGILE HANDLE WITH CARE" printing)
JVCC PP20 Printed Packaging Tape is a white polypropylene packaging tape with message printing. It is used for carton sealing, splicing, and identification. JVCC Printed Packaging Tape uses a water-based acrylic adhesive. Imprinted legends include "FRAGILE HANDLE WITH CARE" and "IF TAPE SEAL IS DISTURBED CHECK CONTENTS BEFORE SIGNING. " Please see Shurtape HP-240 for a tape that includes a red STOP sign along with the text "If Seal Is Broken Or Package Damaged Check Contents Before Signing Receipt. " NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i. e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 48mm x 100m. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e. g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Technical Information - Core: 3 inch diameter neutral - Backing/Carrier: polypropylene (PP) film - Adhesive: water-based acrylic - Thickness: 2 mils (carrier, adhesive)
J.V. Converting Company, Inc.
JVCC FPPT-01 Kraft Flatback Paper Packaging Tape: 3 in x 60 yds. (Brown)
JVCC FPPT-01 Kraft Flatback Paper Packaging Tape is a brown color kraft flatback paper coated with a natural/synthetic rubber blend adhesive system. Good for carton sealing applications, moderate demand splicing applications, tabbing and/or core starting. Complies with Postal Regulation for Uninsured Packages. May be used in picture framing applications to seal back of frame/artwork due to its ability to stick to its own backing. This tape is a pressure-sensitive adhesive tape and does not need water to activate it like a gummed paper tape. The tape is hand-tearable and is not repulpable. This tape has a more matte (less shiny) surface than Shurtape FP-96 Kraft paper tape. Also please note that since this is a very soft tape you will oftentimes see gapping and pressure points along the side of the rolls once it is cut to width; however, this will not affect the performance of the tape. Made in the U. S. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i. e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 72mm x 55m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e. g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Technical Information - Core: 3 inch diameter - Backing/Carrier: flatback paper - Adhesive: natural/synthetic rubber blend - Standards Met: PPP-T-42C, Type II; CID A-A-883B, Type II - Thickness: 7.3 mils (carrier, adhesive) - Adhesion: 58 ounces per inch (to stainless steel test panel) - Tensile Strength: 46 pounds per inch (longitudinal) - Service/Operating Temperature: 40F to 175F - Elongation: 7 %
J.V. Converting Company, Inc.
JVCC 762-BD Bi-Directional Filament Strapping Tape: 3 in x 60 yds. / White (Opaque)
JVCC 762-BD Bi-Directional Filament Strapping Tape is a fiberglass reinforced polypropylene tape which gives you 155# tensile strength in both directions (measures the tape's resistance to being broken apart as stress is applied). It is a high strength, cross bi-directional filament tape used for extremely demanding strapping, bundling and palletizing applications. High tear resistance makes it ideal for tabbing/seaming in the metal fabricating industry. Can also be used as project material for building out a Hexayurt shelter. Referred to as strapping tape or string tape. 762-BD bidi tape also helps to reduce the amount of tape needed for your project since it has filaments in both directions of the tape; traditional filament tape is one direction only. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i. e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 72mm x 55m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e. g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Warning: This product can expose you to chemicals including Toluene, which is [are] known to the State of California to cause birth defects or other reproductive harm. For more information go to www. P65Warnings. ca. gov/. Technical Information - Core: 3 inch diameter neutral - Backing/Carrier: fiberglass reinforced polypropylene film - Adhesive: synthetic rubber - Thickness: 4.7 mils (carrier, adhesive) - Adhesion: 91 ounces per inch (to stainless steel test panel) - Tensile Strength: 155 pounds per inch (longitudinal) 155 pounds per inch (transverse) - Elongation: 6 %
J.V. Converting Company, Inc.
JVCC 765P Premium Grade Filament Strapping Tape: 1 in. x 60 yds. (Natural)
JVCC 765P Premium Grade Filament Strapping Tape is a very high strength polyester backed unidirectional fiberglass filament reinforced tape coated with an aggressive and high shear resistant clear synthetic rubber adhesive. It's high strength and high adhesion to a variety of surfaces make this product suitable for high demand bundling and strength reinforcing applications. JVCC 765P Premium Grade Filament Strapping Tape is a pressure-sensitive tape used for several packaging functions such as closing corrugated fiberboard boxes, reinforcing packages, bundling items, pallet unitizing, etc. The strapping tape can be used to reinforce a heavy box, by running strips of tape around the box to help hold it together. There are some other innovative uses for strapping tape, including quickie book repair, in which the tape can be used to create a snug and flexible spine for a damaged book, and securing bundles of loose objects such as curtain rods for transit. Made in the U.S. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 24mm x 55m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.Technical Information- Core: 3 inch diameter neutral - Backing/Carrier: fiberglass filament reinforced polyester film - Adhesive: synthetic rubber - Standards Met: ASTM D5330 Type II (replaces PPP-T-97E, Type II) - Thickness: 7.5 mils (carrier, adhesive) - Adhesion: 40 ounces per inch (to stainless steel test panel) - Tensile Strength: 330 pounds per inch (longitudinal) - Elongation: 4.5 %
J.V. Converting Company, Inc.
JVCC BST-24 Bag Sealing Tape: 3/8 in x 180 yds. (Red)
JVCC BST-24 Bag Sealing Tape is used to seal polyethylene and other film bags swiftly and efficiently when used in a bag sealing dispenser. Also used for color coding age of perishables. JVCC BST-24 is a UPVC film coated with a solvent-based natural rubber adhesive. Typical bags that can be sealed include produce bags, bakery products, candy items, floral arrangements, industrial parts, newspapers, and hardware. The tape is also printable. Please note BST-24 is JVCC's product number for this specific item (stands for Bag Sealing Tape - 2.4 mils thick). NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i. e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 9mm wide. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e. g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Warning: This product can expose you to chemicals including Hexachlorobenzene (HCB), Polychlorinated biphenyls (PCB), which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www. P65Warnings. ca. gov/. Technical Information - Core: 3 inch diameter neutral - Backing/Carrier: unplasticized polyvinyl chloride (UPVC) film - Adhesive: solvent-based natural rubber - Thickness: 2.4 mils (carrier, adhesive) - Adhesion: 15 ounces per inch (to stainless steel test panel) - Tensile Strength: 42 pounds per inch (longitudinal) - Service/Operating Temperature: up to 176F - Elongation: 75 %
J.V. Converting Company, Inc.
JVCC PES-32G Polyester Film Packaging Tape: 3 in x 60 yds. (Clear)
JVCC PES-32G Polyester Film Packaging Tape is a heavy-duty polyester film packaging tape used to meet the highest of quality & performance requirements. It is used for packaging, sealing, and splicing. This tape features extremely aggressive hot melt rubber-based adhesive that ensures instant holding power and provides a quick reliable seal when used for strip closure of regular slotted containers, overlap sealing, and fiber drum sealing. This polyester carton sealing tape is used for government packaging since it doesn't stretch or elongate like standard BOPP film packaging tape does. Made in the U. S. NOTES: As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e. g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Technical Information - Core: 3 inch diameter - Backing/Carrier: polyester (PET) film - Adhesive: hot met/synthetic rubber resin - Thickness: 3 mils (carrier, adhesive) 2 mils (carrier) - Adhesion: 65 ounces per inch (to stainless steel test panel) - Tensile Strength: 55 pounds per inch (longitudinal) - Application Temperature: -10F to 120F - Service/Operating Temperature: -45F to 140F - Elongation: 100 %
J.V. Converting Company, Inc.
JVCC 762-BD Bi-Directional Filament Strapping Tape: 4 in x 60 yds. (Natural)
JVCC 762-BD Bi-Directional Filament Strapping Tape is a fiberglass reinforced polypropylene tape which gives you 155# tensile strength in both directions (measures the tape's resistance to being broken apart as stress is applied). It is a high strength, cross bi-directional filament tape used for extremely demanding strapping, bundling and palletizing applications. High tear resistance makes it ideal for tabbing/seaming in the metal fabricating industry. Can also be used as project material for building out a Hexayurt shelter. Referred to as strapping tape or string tape. 762-BD bidi tape also helps to reduce the amount of tape needed for your project since it has filaments in both directions of the tape; traditional filament tape is one direction only. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i. e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 96mm x 55m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e. g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Warning: This product can expose you to chemicals including Toluene, which is [are] known to the State of California to cause birth defects or other reproductive harm. For more information go to www. P65Warnings. ca. gov/. Technical Information - Core: 3 inch diameter neutral - Backing/Carrier: fiberglass reinforced polypropylene film - Adhesive: synthetic rubber - Thickness: 4.7 mils (carrier, adhesive) - Adhesion: 91 ounces per inch (to stainless steel test panel) - Tensile Strength: 155 pounds per inch (longitudinal) 155 pounds per inch (transverse) - Elongation: 6 %
J.V. Converting Company, Inc.
JVCC TPS-04 Appliance-Grade Tensilized Polypropylene Strapping Tape: 1/2 in. x 60 yds. (Ivory)
JVCC TPS-04 Appliance Grade Tensilized Polypropylene Strapping Tape is a tape specifically designed to be non-staining and adhesive transfer resistant (offers adhesive residue-free removal) which is used to close, hold, and secure appliances, computers, furniture, and office equipment. It is specially designed to be stain and adhesive transfer resistant. Appliance Tape features high tack, high adhesion, chemical resistance, and it is waterproof and non-toxic. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 12mm x 55m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Warning: This product can expose you to chemicals including Toluene, which is [are] known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.Technical Information- Core: 3 inch diameter - Backing/Carrier: polypropylene (PP) film - Adhesive: natural rubber - Thickness: 4.5 mils (carrier, adhesive) - Adhesion: 64 ounces per inch (to stainless steel test panel) - Tensile Strength: 149 pounds per inch (longitudinal) - Elongation: 30 %
J.V. Converting Company, Inc.
JVCC SCP-04 Silicone-Coated Paper Separator Sheets: 6 in x 6 in. (Off-White) [20 sheets/pack]
JVCC SCP-04 Silicone-Coated Paper Separator Sheets are paper sheets which are coated on both sides with silicone. Tapes with rubber or acrylic adhesive will not stick to the silicone so if you need to send pre-cut tape pieces to a customer they can be used for that purpose. These are the same sheets we use in our layer-packed boxes (e. g. a case of duct tape or gaffers tape) as separators between the layers. They are purchasable by the pack and 20 sheets or strips come per pack. Made in the U. S. Technical Information - Adhesive: N/A - Thickness: 4 mils (carrier)
J.V. Converting Company, Inc.
![JVCC SCP-04 Silicone-Coated Paper Separator Sheets: 6 in x 6 in. (Off-White) [20 sheets/pack]](https://cartnear.s3.us-east-2.amazonaws.com/products/5119880b1cba118ba2a5b4957a08b534.jpg)
JVCC FPPT-01 Kraft Flatback Paper Packaging Tape: 2 in x 60 yds. (Brown)
JVCC FPPT-01 Kraft Flatback Paper Packaging Tape is a brown color kraft flatback paper coated with a natural/synthetic rubber blend adhesive system. Good for carton sealing applications, moderate demand splicing applications, tabbing and/or core starting. Complies with Postal Regulation for Uninsured Packages. May be used in picture framing applications to seal back of frame/artwork due to its ability to stick to its own backing. This tape is a pressure-sensitive adhesive tape and does not need water to activate it like a gummed paper tape. The tape is hand-tearable and is not repulpable. This tape has a more matte (less shiny) surface than Shurtape FP-96 Kraft paper tape. Also please note that since this is a very soft tape you will oftentimes see gapping and pressure points along the side of the rolls once it is cut to width; however, this will not affect the performance of the tape. Made in the U. S. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i. e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 48mm x 55m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e. g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Technical Information - Core: 3 inch diameter - Backing/Carrier: flatback paper - Adhesive: natural/synthetic rubber blend - Standards Met: PPP-T-42C, Type II; CID A-A-883B, Type II - Thickness: 7.3 mils (carrier, adhesive) - Adhesion: 58 ounces per inch (to stainless steel test panel) - Tensile Strength: 46 pounds per inch (longitudinal) - Service/Operating Temperature: 40F to 175F - Elongation: 7 %
J.V. Converting Company, Inc.
JVCC 762-BD Bi-Directional Filament Strapping Tape: 1-1/2 in x 60 yds. (Natural)
JVCC 762-BD Bi-Directional Filament Strapping Tape is a fiberglass reinforced polypropylene tape which gives you 155# tensile strength in both directions (measures the tape's resistance to being broken apart as stress is applied). It is a high strength, cross bi-directional filament tape used for extremely demanding strapping, bundling and palletizing applications. High tear resistance makes it ideal for tabbing/seaming in the metal fabricating industry. Can also be used as project material for building out a Hexayurt shelter. Referred to as strapping tape or string tape. 762-BD bidi tape also helps to reduce the amount of tape needed for your project since it has filaments in both directions of the tape; traditional filament tape is one direction only. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i. e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 36mm x 55m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e. g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Warning: This product can expose you to chemicals including Toluene, which is [are] known to the State of California to cause birth defects or other reproductive harm. For more information go to www. P65Warnings. ca. gov/. Technical Information - Core: 3 inch diameter neutral - Backing/Carrier: fiberglass reinforced polypropylene film - Adhesive: synthetic rubber - Thickness: 4.7 mils (carrier, adhesive) - Adhesion: 91 ounces per inch (to stainless steel test panel) - Tensile Strength: 155 pounds per inch (longitudinal) 155 pounds per inch (transverse) - Elongation: 6 %
J.V. Converting Company, Inc.
JVCC FPPT-01 Kraft Flatback Paper Packaging Tape: 1 in x 60 yds. (Brown)
JVCC FPPT-01 Kraft Flatback Paper Packaging Tape is a brown color kraft flatback paper coated with a natural/synthetic rubber blend adhesive system. Good for carton sealing applications, moderate demand splicing applications, tabbing and/or core starting. Complies with Postal Regulation for Uninsured Packages. May be used in picture framing applications to seal back of frame/artwork due to its ability to stick to its own backing. This tape is a pressure-sensitive adhesive tape and does not need water to activate it like a gummed paper tape. The tape is hand-tearable and is not repulpable. This tape has a more matte (less shiny) surface than Shurtape FP-96 Kraft paper tape. Also please note that since this is a very soft tape you will oftentimes see gapping and pressure points along the side of the rolls once it is cut to width; however, this will not affect the performance of the tape. Made in the U. S. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i. e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 24mm x 55m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e. g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Technical Information - Core: 3 inch diameter - Backing/Carrier: flatback paper - Adhesive: natural/synthetic rubber blend - Standards Met: PPP-T-42C, Type II; CID A-A-883B, Type II - Thickness: 7.3 mils (carrier, adhesive) - Adhesion: 58 ounces per inch (to stainless steel test panel) - Tensile Strength: 46 pounds per inch (longitudinal) - Service/Operating Temperature: 40F to 175F - Elongation: 7 %
J.V. Converting Company, Inc.
