JVCC BST-22 Bag Sealing Tape: 3/8 in x 180 yds. (Tan)

JVCC BST-22 Bag Sealing Tape is a UPVC film coated with a solvent-based natural rubber adhesive. It is used for bag sealing, produce packaging, can sealing and bundling. The tape is also printable. Please note BST-22 is JVCC's product number for this specific item (stands for Bag Sealing Tape - 2.2 mils thick).

NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i. e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 9mm wide. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e. g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.
Warning: This product can expose you to chemicals including Hexachlorobenzene (HCB), Polychlorinated biphenyls (PCB), which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www. P65Warnings. ca. gov/.

Technical Information
- Core: 3 inch diameter neutral
- Backing/Carrier: unplasticized polyvinyl chloride (UPVC) film
- Adhesive: solvent based natural rubber
- Thickness: 2.2 mils (carrier, adhesive)
- Adhesion: 15 ounces per inch (to stainless steel test panel)
- Tensile Strength: 42 pounds per inch (longitudinal)
- Service/Operating Temperature: up to 176F
- Elongation: 75 %