TRONXY 3D printer X5SA-400 Large size and High precision, Power failure resume print, 3.5inch Full Color Touch Screen, US
"Features:
1. 3.5inch Touch screen.
2. Bowden extruder. Quality MK8 nozzle, High accuracy printing, feeding smoothly, Present better printed products
3. Double fan design. The heat dissipation effect is more perfect, Effectively extend the use time
4. Completed mainboard box. Save installation wiring tim e Metal main board box more safty and avoid installation error
5. Upgraded quality pulley. Stable movement, low noise, high printing accuracy. Able to withstand high-speed operation, longer use life
6. Filament run out detection. Automatic detection of filament usage, accurate voice warning; Power 0ff Resume Print. When the power is cut off, it support
continuous power interruption to effectively
reduce the model scrapping by power outages.
7. Autol leveling. Unique automatic leveling system, avoid leveling trouble, Easily adjust the platform"
Shenzhen Tronxy Technology Co., LTD.
TRONXY's new TR sensor can detect all non-transparent objects, 3D printer kit parts, focus detection, automatic leveling + mesh glass 400*400mm
1. Innovative Solenoid: Ultra Power Saving
On idle state, while the push-pin is whether pulled out or retracted, there are not any electric current flowing on solenoid, and standby electric current in the whole device is below 15mA on average, whereas on working state, while the pin is moving in sudden about 100ms, under 300mA flows in the device.
Low power consumption even further drops joule heating, preventing from heat problem.
2. wide Selection of Bed
TR Sensor does not uses either optical, nor proximity (inductive/capacitive) sensor.
TR Sensor is controlled by Hall Effect, providing high precision. Thus the bed material can be selected freely.
3. Optimized structure: Larger Build Size
TR Sensor is a small and technology-intensive one. Build size can be set larger than other existing auto bed leveling sensor.
TR Sensor uses existing RC Servo motor signal intactly, so just plug 3DTouch on the same pins after removing servo motor.
Specification:
Detection distance: 8mm
Working voltage: DC 6-36v
Interface: 3 pins
Cable length: about 120cm
Lattice Glass Plate
1, Leveling is made on A4 size paper to the platform and nozzle, which is obviously obstructive but can be pulled.
2, The platform has serious pollution will affect the adhesion, appear this kind of circumstance can be hot bed heated to 90 degrees, or place your platform for 8 hours to print again, the most direct method using alcohol to wipe a little bit.
3, Printing temperatures of various filaments: PLA50-65°C, TPU40-60°C, ABS80-120°C, PC100-125°C, PETG70-90°C, and NYLON 100-130°C.
4, This product is acid and alkali resistant, and high temperature resistance is 400 degrees.
5, The hardness of the first layer of coating of this product is 0.5H, which is easy to scratch, but the scraping does not affect the adhesion of the model.
6, The product will change color after many times rubbing with alcohol, but it will not affect normal use.
7, This product is slightly after wiping with alcohol can enhance the viscosity of the platform and the ability to absorb the oil, if you want to make a large models for a long time, can use a paper towel or cloth dipped into alcohol wipe slightly, so that we can ensure that the platform power ability to continue playing.(just rub it with alcohol once. You don't need to rub it every time when you strat print it. Repeated rubbing will not increase the stickiness.
8, Avoid repeatedly touching the platform with your hands as much as possible to prevent serious sweat oil on the platform.
9, This product is treated with special technology, and there will be no glass pit.
Package list:
Plate Clamps × 4
Screw ( M3 15mm ) × 2
TR Sensor with 120mm Cable1 × 1
400*400MMLattice Glass Plate1 × 1
Shenzhen Tronxy Technology Co., LTD.
TRONXY 3D flexible yellow TPU filament 1.75 mm, 2.2 pounds (1KG) Material: TPU, hardness 95A
1.75MM TPU(flexible) FILAMENT: The TPU(flexible) filaments are useful in a broad range of printing applications which have the advantage of Low-Odor and Low-Warp. Compared with traditional brittle TPU(flexible), 3D printer filaments have adjusted the degradability of the material for optimal performance, so TPU(flexible) filaments are not brittle during 3D printing jobs. Shore hardness A, 3 sec95 ; Shore hardness D, 15 sec46
+/- 0.05MM TOLERANCE: TPU(flexible) 3D printer filaments are produced with more precise specification and have a tolerance of only +/- 0.05 mm. No matter which 3D printer you are using, the consistently round diameters provide optimum flow through the extruder nozzle. Almost all 1.75 mm-specification 3d printers in the market are configured to run with the TPU(flexible) 3D printing filaments
VACUUMED SEALED PACKAGING: Some 3D printing materials can be negatively affected by moisture, so this is why 3D printer filaments are all vacuumed sealed along with a desiccant pack. This will enable you to easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging
100% ENVIRONMENTAL FRIENDLY: 3D printer filaments comply with the Restriction of Hazardous Substance (RoHS) directive and are free from potentially hazardous substances. The 1.75 mm TPU filament gives off a sweet smell, and it is considered by many as an improvement over hot PLA Plastic
100% SATISFACTION GUARANTEE: insists on offering best 3D printer filaments and best customer service for customers. 1. The color may be slightly different due to different photography equipment and light. 2. For the same filaments, the tonal tone of each batch from the factory will be slightly different. The color of each batch will not be 100% consistent, but the raw materials are the same so the quality remains the same.
Shenzhen Tronxy Technology Co., LTD.
TRONXY TPU 3D Printer Filament 1.75mm Dimensional Accuracy +/- 0.05mm 1kg(2.2lbs) Spool, Blue
Features: 1kg/ 2.2 lbs filament, 1.75 mm diameter, suitable for most FDM 3D printers. (Tolerance: 0.05 mm) Made of high quality TPU, which is soft and elastic, with high strength, good toughness and wear resistance. Good tensile strength, good ductility, row neatly without tangle, convenient and enough for use. The stable melting point is more advantageous to ensure the fluent printing process, smooth forming effect with no bubbles. Vacuum sealed with desiccants, recommended extrusion/nozzle temperature: 200-230?(392-446?). Specifications: Color: Black/ White/ Red/ Yellow/ Blue/ Green/ Orange (optional) Material: TPU Diameter: 1.75 mm Dimensional Accuracy: 0.05 mm Printing Temperature: 200-230?(392-446?) Item Size: 20 * 20 * 6.6 cm/ 7.9 * 7.9 * 2.6 in Item Weight: 1kg/ 35.3 oz Package Size: 21 * 21 * 7.5 cm/ 8.3 * 8.3 * 3.0 in Package Weight: 1.35 kg/ 47.6 oz Packing List: 1 * TPU Filament Spool
Shenzhen Tronxy Technology Co., LTD.
TRONXY's new TR sensor can detect all non-transparent objects, 3D printer kit parts, focus detection, automatic leveling + mesh glass 330*330mm
1. Innovative Solenoid: Ultra Power Saving
On idle state, while the push-pin is whether pulled out or retracted, there are not any electric current flowing on solenoid, and standby electric current in the whole device is below 15mA on average, whereas on working state, while the pin is moving in sudden about 100ms, under 300mA flows in the device.
Low power consumption even further drops joule heating, preventing from heat problem.
2. wide Selection of Bed
TR Sensor does not uses either optical, nor proximity (inductive/capacitive) sensor.
TR Sensor is controlled by Hall Effect, providing high precision. Thus the bed material can be selected freely.
3. Optimized structure: Larger Build Size
TR Sensor is a small and technology-intensive one. Build size can be set larger than other existing auto bed leveling sensor.
TR Sensor uses existing RC Servo motor signal intactly, so just plug 3DTouch on the same pins after removing servo motor.
Specification:
Detection distance: 8mm
Working voltage: DC 6-36v
Interface: 3 pins
Cable length: about 120cm
Lattice Glass Plate
1, Leveling is made on A4 size paper to the platform and nozzle, which is obviously obstructive but can be pulled.
2, The platform has serious pollution will affect the adhesion, appear this kind of circumstance can be hot bed heated to 90 degrees, or place your platform for 8 hours to print again, the most direct method using alcohol to wipe a little bit.
3, Printing temperatures of various filaments: PLA50-65°C, TPU40-60°C, ABS80-120°C, PC100-125°C, PETG70-90°C, and NYLON 100-130°C.
4, This product is acid and alkali resistant, and high temperature resistance is 400 degrees.
5, The hardness of the first layer of coating of this product is 0.5H, which is easy to scratch, but the scraping does not affect the adhesion of the model.
6, The product will change color after many times rubbing with alcohol, but it will not affect normal use.
7, This product is slightly after wiping with alcohol can enhance the viscosity of the platform and the ability to absorb the oil, if you want to make a large models for a long time, can use a paper towel or cloth dipped into alcohol wipe slightly, so that we can ensure that the platform power ability to continue playing.(just rub it with alcohol once. You don't need to rub it every time when you strat print it. Repeated rubbing will not increase the stickiness.
8, Avoid repeatedly touching the platform with your hands as much as possible to prevent serious sweat oil on the platform.
9, This product is treated with special technology, and there will be no glass pit.
Package list:
Plate Clamps × 4
Screw ( M3 15mm ) × 2
TR Sensor with 120mm Cable1 × 1
330*330MMLattice Glass Plate1 × 1
Shenzhen Tronxy Technology Co., LTD.
TRONXY X5SA-400 PRO 3D Printer, 3.5inch Full Color Touch,New Aluminum Frame Resume Printing
?REMOVABLE BUILD SURFACE PLATE?Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling. ?OPEN SOURCE? comgrow creality In the spirit of innovation and progress, we have decided to make our firmware and design plans available to all for extensive modding and improvements. We hope to create a large community of users who contribute to the project ultimately resulting in a better product for all. ?EXTRA LARGE?This printer comes with one of the largest build spaces available. you can print models that 90% of other printers could not. The unique creality 3d printer extruder design reduces the weight on the X-axis which delivers better performance even on very tall prints. ?New Aluminum Frame Resume Printing?metal 3d printer Better printing quality and durable with sturdy new frame. Stylish outlook. Resume printing after power loss; Filament run out detection system automatically suspends printing when the filament runs out.
Shenzhen Tronxy Technology Co., LTD.
Tronxy XY-2 Pro Titan 24V quick installation 3D printer 3.5-inch full-color touch screen can print flexible consumables Print size 255X255X245MM
Brand: Tronxy
Model: XY-2 PRO Titan
Type: DIY
Material (frame): Aluminum
Platform board: aluminum alloy fiberglass board
Engraving area: 255 x 250 x 245mm
Number of nozzles: single
Nozzle diameter: 0.4mm
Nozzle temperature: room temperature to 275 degrees
Layer thickness: 0.1-0.4mm
Memory card offline printing: SD card
LCD screen
Printing speed: 20-100mm/s
Supporting materials: ABS, PLA, PP, PVA, TPU and other flexible consumables
Material diameter: 1.75mm
Language: Chinese, English
File format: G code, STL
XY axis positioning accuracy: 0.0125mm
Z-axis positioning accuracy: 0.02mm
Voltage: 24V
Host software: Cura, Repetier-Host, Tronxy
Packing type: special custom boxed
System support: Windows / Mscos / Linux
Connector type: SD card, USB
Size and weight
Product weight: 8.5000 kg
Package weight: 12.0000 kg
Product size (length x width x height): 47.80 x 45.50 x 52.00 cm / 18.82 x 17.91 x 20.47 inches
Packing size (length x width x height): 52.00 x 49.00 x 25.00 cm / 20.47 x 19.29 x 9.84 inches
Shenzhen Tronxy Technology Co., LTD.
TRONXY XY-2 PRO V-slot Prusa I3 DIY 3D Printer Kit 255*255*260mm Printing Size Titan Extruder Available With Power Resume / Filament Detect / Auto Leveling Function
Dear customer: If the product has different styles, colors or models, please Email us after placing the order. Do you want to knowmore about 3D printing face mask? Do you want toprint your own face mask? Please refer to the following link: - Face Mask Buckle STL File for download: Click me- Video of 3D Printed Face Shields for Medical and Professionals: Click me-Prusa Protective Face Shield: PDF: Click me English Manual: Click me-Prusa Printer Protective Face Shield Printing Files (Gcode): Click me Model Files(STL, 3MF, OBJ, AMF, F3D): Click meType A: Standard Version with standard MK8 extruderType B: Upgraded Version with Titan ExtruderPlease select the type you needSpecificationBrand NameTRONXY ModelXY-2 PRO StructureAluminium ProfilePrint Size255*255*260mm (Max) Layer thickness 0.1 - 0.4 mmLCD ScreenSupportPrinting SupportSD card/USB PrintSpeed20- 100mm/sXY axis positioniong accuracy 0.0125 mmZ axis positioning accuracy 0.02 mmNozzle diameter 0.4 mm (Default) Nozzle temperaturele; 275?HeatbedIncludedPrinting materialPLA, ABS, HIPS, WOOD, PC, PVC and moreMaterial Diameter 1.75 mmSoftware LanguageEnglish, ChineseFile Format printingSTL, G-codeMachine Dimension 460*455*520mmPackage Dimension520*490*250mmPower Supply110V/220V 360WWorking Voltage24VOperating SystemXP, WIN7, MAC Host Computer SoftwareRepetier-Host, CuraEnvironmental Requirement8-40?, Humidity: 20-80%Connectivity (Interface) USB, LCDdisplayandSDcardreaderMachine Weight 8.5 kgPackageWeight12KGPackage included: 1 x XY-2 PRO 3D Printer
Shenzhen Tronxy Technology Co., LTD.
TRONXY PLA 3D Printer Filament 1.75mm Dimensional Accuracy +/- 0.05mm 1kg(2.2lbs) Spool, Blue
Features: 1kg/ 2.2 lbs filament, 1.75 mm diameter, suitable for most FDM 3D printers. (Tolerance: 0.05 mm) Made of environmentally friendly PLA, non-toxic and odorless, biodegradable and safe for use. Good tensile strength, good ductility, row neatly without tangle, convenient and enough for use. The stable melting point is more advantageous to ensure the fluent printing process, smooth forming effect with no bubbles. Vacuum sealed with desiccants, recommended extrusion/nozzle temperature: 190-220?(374-428?). Specifications: Color: Black/ White/ Grey/ Red/ Yellow/ Blue/ Green/ Orange/ Pink/ Gold (optional) Material: PLA Diameter: 1.75 mm Dimensional Accuracy: 0.05 mm Printing Temperature: 190-220?(374-428?) Hot Bed Temperature: 60? Tensile Strength: 60MPa Item Size: 20 * 20 * 6.6 cm/ 7.9 * 7.9 * 2.6 in Item Weight: 1kg/ 35.3 oz Package Size: 21 * 21 * 7.5 cm/ 8.3 * 8.3 * 3.0 in Package Weight: 1.35 kg/ 47.6 oz Packing List: 1 * PLA Filament Spool
Shenzhen Tronxy Technology Co., LTD.
TRONXY PLA 3D Printer Filament 1.75mm Dimensional Accuracy +/- 0.05mm 1kg(2.2lbs) Spool, Red
Features: 1kg / 2.2 lbs filament, 1.75 mm in diameter, suitable for most FDM 3D printers.
(Tolerance: 0.05mm) Made of environmentally friendly PLA, non-toxic, tasteless, biodegradable and safe to use. Good tensile strength, good ductility, neat rows without tangles, convenient and convenient to use. A stable melting point is more conducive to ensuring a smooth printing process, a smooth molding effect and no bubbles. It is recommended to use desiccant for vacuum sealing
Extrusion/nozzle temperature: 190-220? (374-428?).
specification:
Color: black/white/gray/red/yellow/blue/green/orange/pink/gold (optional)
Material: PLA
Diameter: 1.75 mm
Dimensional accuracy: 0.05 mm
Printing temperature: 190-220°C
Hot bed temperature: 60°C
Tensile strength: 60MPa
Product size: 20 * 20 * 6.6 cm / 7.9 * 7.9 * 2.6 inches
Product weight: 1kg / 35.3 oz
Packing size: 21 * 21 * 7.5 cm / 8.3 * 8.3 * 3.0 inches
Package weight: 1.35 kg / 47.6 oz
Packing list: 1 * PLA filament spool
Shenzhen Tronxy Technology Co., LTD.
TRONXY PLA 3D Printer Filament 1.75mm Dimensional Accuracy +/- 0.05mm 1kg(2.2lbs) Spool, Yellow
Features: 1kg / 2.2 lbs filament, 1.75 mm in diameter, suitable for most FDM 3D printers.
(Tolerance: 0.05mm) Made of environmentally friendly PLA, non-toxic, tasteless, biodegradable and safe to use. Good tensile strength, good ductility, neat rows without tangles, convenient and convenient to use. A stable melting point is more conducive to ensuring a smooth printing process, a smooth molding effect and no bubbles. It is recommended to use desiccant for vacuum sealing
Extrusion/nozzle temperature: 190-220? (374-428?).
specification:
Color: black/white/gray/red/yellow/blue/green/orange/pink/gold (optional)
Material: PLA
Diameter: 1.75 mm
Dimensional accuracy: 0.05 mm
Printing temperature: 190-220°C
Hot bed temperature: 60°C
Tensile strength: 60MPa
Product size: 20 * 20 * 6.6 cm / 7.9 * 7.9 * 2.6 inches
Product weight: 1kg / 35.3 oz
Packing size: 21 * 21 * 7.5 cm / 8.3 * 8.3 * 3.0 inches
Package weight: 1.35 kg / 47.6 oz
Packing list: 1 * PLA filament spool
Shenzhen Tronxy Technology Co., LTD.
TRONXY 3D flexible orange TPU filament 1.75 mm, 2.2 pounds (1KG) Material: TPU, hardness 95A
1.75MM TPU(flexible) FILAMENT: The TPU(flexible) filaments are useful in a broad range of printing applications which have the advantage of Low-Odor and Low-Warp. Compared with traditional brittle TPU(flexible), 3D printer filaments have adjusted the degradability of the material for optimal performance, so TPU(flexible) filaments are not brittle during 3D printing jobs. Shore hardness A, 3 sec95 ; Shore hardness D, 15 sec46
+/- 0.05MM TOLERANCE: TPU(flexible) 3D printer filaments are produced with more precise specification and have a tolerance of only +/- 0.05 mm. No matter which 3D printer you are using, the consistently round diameters provide optimum flow through the extruder nozzle. Almost all 1.75 mm-specification 3d printers in the market are configured to run with the TPU(flexible) 3D printing filaments
VACUUMED SEALED PACKAGING: Some 3D printing materials can be negatively affected by moisture, so this is why 3D printer filaments are all vacuumed sealed along with a desiccant pack. This will enable you to easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging
100% ENVIRONMENTAL FRIENDLY: 3D printer filaments comply with the Restriction of Hazardous Substance (RoHS) directive and are free from potentially hazardous substances. The 1.75 mm TPU filament gives off a sweet smell, and it is considered by many as an improvement over hot PLA Plastic
100% SATISFACTION GUARANTEE: insists on offering best 3D printer filaments and best customer service for customers. 1. The color may be slightly different due to different photography equipment and light. 2. For the same filaments, the tonal tone of each batch from the factory will be slightly different. The color of each batch will not be 100% consistent, but the raw materials are the same so the quality remains the same.
Shenzhen Tronxy Technology Co., LTD.
2020 New X5SA Pro 3D Printer High Precision Large Build Size Double Axis External Guide Rail and Titan Extruder, TRONXY 3D Printer
Utilisation de l'extrudeuse Titan? L'extrudeuse Titan est adaptée à une variété de filaments, tels que PLA, ABS, PETG, BOIS, TPU, FIXABLE Détection de rupture de filament? Lorsque le filament s'épuise ou se déconnecte, l'imprimante est automatiquement suspendue et envoie un signal d'avertissement pour garantir une impression fluide du modèle. Mise à niveau automatique? Système de mise à niveau automatique unique, évitez les problèmes de mise à niveau. Modes de mouvement CoreXY? Courroies synchrones multiples, précision de moulage élevée, vitesse d'impression rapide Plus de fonctionnalités? Poulie silencieuse, ventilateur de refroidissement bidirectionnel, câblage dans le boîtier de la carte mère et écran tactile couleur de 3, 5 pouces. Print size (L*W*H): 330*330*400mm Machine size (L*W*H): 580*645*660mm Packing size (L*W*H): 670*470*190mm Power Supply: AC 110V/220V, DC 24V 360W Machine weight: ˜ 15kg Packing weight: ˜ 16.5 kg Nozzle diameter: 0.4 mm Connection: USB and SD card Extruder temperature: max 270? Heat bed: Included Printing material support: PLA, ABS, PETG, TPU Printing accuracy: 0.1 - 0.4 mm Functions: Auto level/Filament run-out detection/Resume print after power-off/guide rail/titan extruder Structure materials: Aluminium and metal Operation Mode: 3.5 inch Touch screen
Shenzhen Tronxy Technology Co., LTD.
TRONXY XY-3 Pro DIY 3D printer kit 300x300x400mm with 24V power supply / titanium extruder / silent motherboard 2225 driver chip / large printing area for filament detection
stepper drivers, direct drive extruder, dual Z axis, TFT touch screen.
? Standard Building Volume:
300*300*400mm large print size; 100mm/s max print speed. High accuracy printing quality, down to 50 microns.
? Easy Installation and Stable Performance:
95% pre-assembled, easy for installation.
With full aluminum frame design, very stable structure
? Developed Function:
Synchronized Dual Z System
Support power loss detection and recovery.
Support filament runout detection and recovery
? Powerful high quality accessories:
With touch screen control, , Ultra-quiet Stepper Driver. And titan style direct-drive extruder to support flexible materials.
? User-friendly matching:
110v and 220v are available, suitable for working voltage in most parts of the world.
Shenzhen Tronxy Technology Co., LTD.
TRONXY D01 Quickly Assemble 3D Printer Ultra Quiet Mode Titan Extruder Acrylic Mask Power Recovery Filament Detection
D01 is an ultra-quiet X linear guide 3D printer
stepper drivers, direct drive extruder, TFT touch screen.
Standard Building Volume:
220*220*220mm print size; 100mm/s max print speed. High accuracy printing quality, down to 50 microns.
Easy Installation :
85% pre-assembled, easy for installation.
Developed Function:
Support power loss detection and recovery.
Support filament runout detection and recovery
Powerful high quality accessories:
Ultra-quiet Stepper Driver.
110v and 220v are available, suitable for working voltage in most parts of the world.
Shenzhen Tronxy Technology Co., LTD.
2020 New XY-2 PRO 3D Printer Upgraded High precision 3D Printer Full Color Touch Screen Auto Leveling Continuation Print of TRONXY XY-2 PRO
Print size(L*W*H):255*255*260mm Machine size(L*W*H):478*455*520mm Packing size(L*W*H): 520*490*250mm Power Supply: AC 110V/220V, DC 24V 360W Machine weight:˜ 8.5 kg Packing weight:˜ 12kg Nozzle diameter: 0.4 mm Connection:USB and SD card Extruder temperature:170~270? Heat bed:Included Printing material support:PLA, ABS, PETG Printing accuracy: 0.1 - 0.4 mm Functions:Auto level/Filament run-out detection/Resume print after power-off/titan extruder (optional) Structure materials:Aluminium and metal Operation Mode: 3.5 inch Touch screen
Shenzhen Tronxy Technology Co., LTD.
TRONXY XY-2 PRO V-slot Prusa I3 DIY 3D Printer Kit 255*255*260mm Printing Size Titan Extruder Available With Power Resume / Filament Detect / Auto Leveling Function
Dear customer: If the product has different styles, colors or models, please Email us after placing the order. Do you want to knowmore about 3D printing face mask? Do you want toprint your own face mask? Please refer to the following link: - Face Mask Buckle STL File for download: Click me- Video of 3D Printed Face Shields for Medical and Professionals: Click me-Prusa Protective Face Shield: PDF: Click me English Manual: Click me-Prusa Printer Protective Face Shield Printing Files (Gcode): Click me Model Files(STL, 3MF, OBJ, AMF, F3D): Click meType A: Standard Version with standard MK8 extruderType B: Upgraded Version with Titan ExtruderPlease select the type you needSpecificationBrand NameTRONXY ModelXY-2 PRO StructureAluminium ProfilePrint Size255*255*260mm (Max) Layer thickness 0.1 - 0.4 mmLCD ScreenSupportPrinting SupportSD card/USB PrintSpeed20- 100mm/sXY axis positioniong accuracy 0.0125 mmZ axis positioning accuracy 0.02 mmNozzle diameter 0.4 mm (Default) Nozzle temperaturele; 275?HeatbedIncludedPrinting materialPLA, ABS, HIPS, WOOD, PC, PVC and moreMaterial Diameter 1.75 mmSoftware LanguageEnglish, ChineseFile Format printingSTL, G-codeMachine Dimension 460*455*520mmPackage Dimension520*490*250mmPower Supply110V/220V 360WWorking Voltage24VOperating SystemXP, WIN7, MAC Host Computer SoftwareRepetier-Host, CuraEnvironmental Requirement8-40?, Humidity: 20-80%Connectivity (Interface) USB, LCDdisplayandSDcardreaderMachine Weight 8.5 kgPackageWeight12KGPackage included: 1 x XY-2 PRO 3D Printer
Shenzhen Tronxy Technology Co., LTD.
Tronxy X5SA-400 Large Size 400X400X400mm 3d Printer Cheapest Large Size Printer
stepper drivers, direct drive extruder, dual Z axis, TFT touch screen.
? Standard Building Volume:
400 x 400 x 500mm large print size; 100mm/s max print speed. High accuracy printing quality, down to 50 microns.
? Stable Performance:
With frame design, very stable structure
? Developed Function:
Synchronized Dual Z System
Titan extruder: flexible consumables
Support power loss detection and recovery.
Support filament runout detection and recovery
? User-friendly matching:
110v and 220v are available, suitable for working voltage in most parts of the world.
Shenzhen Tronxy Technology Co., LTD.
Tronxy Large Size 330X330X400MM X5SA-2E Two-color Printing DIY 3.5inch Full Color Touch Screen 3d-printer
Technical grade high printing precision ( 0.4mm diameter nozzle )
LCD screen supported, 3.5 inch big touch screen
Titan extruder has smoother wire output (flexible consumables can be used)
Two-way fan design (better heat dissipation effect)
Mainboard box wiring (save time and reduce errors)
Automatic leveling function
Use high speed track wheels to ensure fast print
Power failure resume print
Filament run out detection
High power supply ( 360W )
Use aluminium profile, durable and wearing-resisting
USB and SD card supported, meet different demands
Operating system: XP, WIN7, MAC
Shenzhen Tronxy Technology Co., LTD.
X5SA-400 PRO 3D Printer, Auto leveling, 3.5INCH Full Color Touch screen, No Edge Warping
"?REMOVABLE BUILD SURFACE PLATE?Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
?OPEN SOURCE? comgrow creality In the spirit of innovation and progress, we have decided to make our firmware and design plans available to all for extensive modding and improvements. We hope to create a large community of users who contribute to the project ultimately resulting in a better product for all.
?EXTRA LARGE?This printer comes with one of the largest build spaces available.you can print models that 90% of other printers could not. The unique creality 3d printer extruder design reduces the weight on the X-axis which delivers better performance even on very tall prints.
?New Aluminum Frame Resume Printing?metal 3d printer Better printing quality and durable with sturdy new frame. Stylish outlook. Resume printing after power loss; Filament run out detection system automatically suspends printing when the filament runs out."
Shenzhen Tronxy Technology Co., LTD.
TRONXY XY-2 Pro 3D Printer Kit Fast Assembly 255*255*260mm Build Volume Silent Printing Support Auto Leveling Resume Print Filament Run Out Detection with 8G TF Card & PLA Sample Filament 250g
Features:
Aluminum profile frame, which has strong structure and high stability. With 3.5 inches full color touchscreen , easy to understand and operate.
Printer has resume printing function, when the power is restored, the printer will continue to print from the interruption point. Support filament run out detection, timely remind filament shortage or cut-off filament.
High quality auto leveling sensor, ensure hot bed leveling, improve printing accuracy. Silent motherboard, gives less noises and higher precision.
Double fans extruder head, better cooling effect, more stable printing, longer service life.
Durable black sticker, easier to remove the model and don't be afraid to scratch the surface.
Max.255*255*260mm printing size, support various 1.75mm printing filaments like PLA, HIPS, WOOD, PC, PVC and more.
Widely used in toy, architecture, furniture, education, medical, daily necessities and other fields.
In special period, if you are interested, you might try printing your own masks or goggles with the 3D printer to give you and your families and friends a safety guarantee.
Specifications:
Brand Name: TRONXY
Model: XY-2 PRO
Plug: US
Power Supply: 110V/220V 360W
Structure: Aluminum Profile
Print Size: 255*255*260mm(Max)
Layer Thickness: 0.1-0.3mm
LCD Screen: Support
Printing Support: TF card/USB
Print Speed: 20-100mm/s
XY Axis Positioning Accuracy: 0.0125mm
Z Axis Positioning Accuracy: 0.02mm
Nozzle Diameter: 0.4mm(Default)
Nozzle Temperature: =275?
Heatbed: Included
Printing Material: PLA, HIPS, WOOD, PC, PVC and more
Material Diameter: 1.75mm
Screen: 3.5 Full Color Touchscreen
Software Language: English,Chinese
File Format Printing: STL,G-code
Operating System: XP,WIN7,MAC
Host Computer Software: Repetier-Host,Cura
Environmental Requirement: 8-40?, Humidity: 20-80%
Connectivity (Interface): USB, LCD display and SD card reader
Machine Dimension: 46.0 * 45.5 * 52.0cm / 18.1 * 17.9 * 20.5in
Machine Weight: 8.5kg / 18.7lbs
Package Dimension: 52.0 * 49.0 * 25.0cm / 20.5 * 19.3 * 9.8in
Package Weight: 11050g / 389.8oz
Package List:
1 * 3D Printer Kit
Shenzhen Tronxy Technology Co., LTD.
