Buy 1.3 Inch SSD1106 I2C 128X64 OLED Display Module Board & GY-BMP280-3.3 Atmospheric Pressure Sensor Module in United States - Cartnear.com

1.3 Inch SSD1106 I2C 128X64 OLED Display Module Board & GY-BMP280-3.3 Atmospheric Pressure Sensor Module

CTNR1059926 CTNR1059926

IMC

IMC
2025-11-21 USD 50.19

$ 50.19 $ 51.21

Item Added to Cart

*Product availability is subject to suppliers inventory

1.3 Inch SSD1106 I2C 128X64 OLED Display Module Board & GY-BMP280-3.3 Atmospheric Pressure Sensor Module
SHIPPING ALL OVER UNITED STATES
1.3 Inch SSD1106 I2C 128X64 OLED Display Module Board & GY-BMP280-3.3 Atmospheric Pressure Sensor Module
100% MONEY BACK GUARANTEE
1.3 Inch SSD1106 I2C 128X64 OLED Display Module Board & GY-BMP280-3.3 Atmospheric Pressure Sensor Module
EASY 30 DAYSRETURNS & REFUNDS
1.3 Inch SSD1106 I2C 128X64 OLED Display Module Board & GY-BMP280-3.3 Atmospheric Pressure Sensor Module
24/7 CUSTOMER SUPPORT
1.3 Inch SSD1106 I2C 128X64 OLED Display Module Board & GY-BMP280-3.3 Atmospheric Pressure Sensor Module
TRUSTED AND SAFE WEBSITE
1.3 Inch SSD1106 I2C 128X64 OLED Display Module Board & GY-BMP280-3.3 Atmospheric Pressure Sensor Module
100% SECURE CHECKOUT
Type Accessories
set 2: 1 x GY-BMP280- 3.3 Sensor Module + 1 x Module What is OLED? OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a back light and therefore has much lower power usage. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays. Self-emitting light, does not need a back light High luminosity Because pressure changes with altitude, and the pressure measurements are so good, you can also use it as an altimeter with+/- 1 meter accuracy Low operating voltage and power consumption Quick response Wide range of operating temperatures (-40c to 85c)
Specification Interface: I2C
Resolution: 128 x 64
Driver IC: SSD1106
Arduino Library: U8g2 library
Raspberry Pi Library: WiringPi
Wiring Pi Pin Description:
GND: Power
Ground VCC: Power + (DC 3.3 ~5v)
SCL: Clock
Line SDA: Data
Line escription:
Model: GY-BMP280- 3.3
Chip: BMP280
Power supply: 3V
Communication method: Standard IIC/SPI communication protocol
Air pressure range: 300-1100hPa
Pin pitch: 2.54 mm
Module size: 11.5 mm x 15mm
Color: purple/blue
Material: Plastic
Typical application: Enhancement of GPS navigation(e. g. time-to-first-fix improvement, dead-reckoning, slope detection) Indoor navigation(floor detection, elevator detection) Outdoor navigation, leisure and sports applications Weather forecast Health care application(e. g. sirometry) Vertical velocity indication(e. g.
risk/sink speed) Package Contents: 1 x GY-BMP280- 3.3 Sensor Module 1 x pin header 1 x Module Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Related Products

See More

You May Also Like

See More