Pennzoil 10W-30 Platinum High Mileage

Capacity (Volume): 1 Quart
•Recommended for vehicles that have accumulated over 75,000 miles
•Engineered to provide a high-quality base oil using our revolutionary PurePlus gas-to-liquid technology in combination with a high-performance additive system
•Helps protect against the effects of low-speed pre-ignition (LSPI) in modern turbocharged modern engines
•Conditions dry or cracked seals on older engines to help reduce leaks and oil burn-off
•Offers unsurpassed wear protection- No other leading synthetic oil provides better wear protection from friction.
Pennzoil Platinum High Mileage SAE 10W-30 is a full synthetic motor oil that is uniquely engineered from our revolutionary PurePlus gas-to-liquid technology which is a patented process that converts pure natural gas into a high quality, full synthetic base oil. Because it is made from natural gas, the base oil is 99.5% pure, contains fewer impurities than base oils made from crude oil, and when combined with our advanced additive technology, creates one of the best formulations in our Pennzoil high mileage portfolio. As your car ages, leaks may develop and cause higher oil consumption and burn off, potentially causing your engine to need frequent top-offs. Pennzoil Platinum High Mileage motor oil is enhanced with an excellent combination of special conditioning seal agents and additives to help stop leaks from seals and reduce the oil consumption that is typical of older and worn engines. Our full synthetic high mileage motor oil also protects engines for loss of horsepower, offers excellent performance in extreme temperatures, and provides unsurpassed wear protection*, and protection against abnormal combustion phenomenon like low-speed pre-ignition observed in modern turbocharged gasoline direct injection (TGDI) engines. Pennzoil Platinum High Mileage SAE 10W-30 is engineered to help keep engines clean by gently lifting deposits and keeping them away from critical moving engine parts In fact, it keeps pistons up to 50% cleaner than the toughest industry standards.**
*Based on Sequence IVA wear test using SAE 5W-30. Does not apply to Pennzoil Platinum Euro motor oils.
**Based on Sequence IIIH results. Does not apply to Pennzoil Platinum Euro motor oil
Specifications, Approvals and Recommendations
- FCA MS-6395
Exceeds the requirements of the following industry specifications:
- API SN PLUS, API SN-RC and all previous categories
- ILSAC GF-5