Size: 5W 8O JST-PH 2.0 |
Color: Speaker 5 Watt 8 Ohm-JST-PH 2.0 Interface painstakingly deploys this passive speaker small speaker for the Makers and electronic enthusiasts, this small passive speaker with JST-PH 2.0 interface, the internal resistance is 8 ohms, the power of it is 5 watts. Strip size, with mounting screw, suitable for all kinds of sound source fabrication, the sound is clear and melodious without distortion. APPLICATION - Arduino - Robot - Raspberry Pi - Advertising Machine - Game Machine - Integrated Machine Special Speaker TECHNICAL SPECIFICATIONS -
Impedance: 8 Ohm Plus/Minus 15% at 1000Hz.
1V - Power Rating: Rated Power / Maximum Power 5.0W / 5.5W -
FO: 450Hz Plus/Minus 150Hz at 1.0V - S. P.
L: 94dB Plus/Minus 3dB/ 1.0 Watt 0.1M eter; Average At1000, 1200, 1500, 2000Hz.
- Frequency Range: FO to 10, 000Hz. Average SPL-10dB.
- Distortion: 10% Maximum at 1000Hz. 1.0V.
- Abnormal Sound Test: Must be Normal Tested by 6.32; Volts. Sine wave for 50 to 5KHZ.
- Polarity: Diaphragm Shall Move Forward When Apply a Positive DC. Red "+" or "Marked" Terminal.
- Operating Temperature: -25 Degree Celsius to +65 Degree Celsius.
- Storage Temperature: -25 Degree Celsius to +65 Degree Celsius. - High
Temperature Storage Test: 65 Degree Celsius Plus/Minus 2 Degree Celsius - 96 Hours. - Low
Temperature Storage Test: -25 Degree Celsius Plus/Minus 2 Degree Celsius - 96 Hours.
- Size: 70mm * 31mm * 16mm.
- Screw hole distance: 24mm * 63mm.
- Interface: JST PH 2.0 2-Pin.
- Interface cable length: 40cm.
- Total weight: 24g. SHIPPING LIST 2 * Passive Speaker 5 Watt 8 Ohm(JST-PH 2.0 Interface)