Weight: 1.3 pounds
Connection Gender: Male-To-Male
Inspired Engineering for Uncompromised Performance
Optimized for congested wireless environments the SVS SoundPath Tri-Band Wireless Audio Adapter expands SVS range of full-range wireless audio adapters. In most systems the more affordable SVS SoundPath Wireless Audio Adapter is sufficient however if you have a wireless environment prone to interference from other devices the Tri-Band version is better suited for pristine signal transfer without interference.
The SVS SoundPath Tri-Band Wireless Audio Adaptor reduces cable clutter without sacrificing performance. Wirelessly connect a subwoofer stereo zone of powered speakers powered surround sound speakers amplifiers and other components in just minutes. Transmits a full-range (6Hz 20 kHz) stereo signal up to 130-feet (line of sight).
By auto-switching between the 2.4 GHz 5.2 GHz and 5.8 GHz wireless bands the adapter operates flawlessly in the most crowded wireless environments. Uncompromised sound quality less cable clutter and no more interference from security cameras Bluetooth devices smart TVs WiFi mesh networks or other wireless devices.
Tri-Band Technology Works Flawlessly in Congested Wireless Environments
Auto-switches between 2.4 GHz 5.2 GHz and 5.8 GHz wireless bands to select the most stable channel for uninterrupted audio playback. Highly resistant to interference from Wi-Fi-based security cameras routers smart TVs and other wireless devices.
Uncompromised Sound Quality
Passes pristine CD-quality (16-bit/48KHz) audio signal up to 130-feet with no noticeable delay.
Eliminates Audio Cable Clutter
Streamlines home theater system setup by removing the need for long or complicated audio cables running along floors or walls.
True Stereo Signal
Left/Right stereo signal transfer unlocks wireless connectivity for one or more subwoofers 2-channel zone of powered speakers amplifiers powered surround speakers and more.
Full-Range Wireless Connectivity
Transmits the complete audible frequency spectrum (6Hz to 20kHz +/-0.5 dB) providing a full-range wireless audio solution for subwoofers powered speakers amplifiers and more. Great for adding additional zones to create single source multi-zone audio system.
Expands Placement Options
Adds wireless connectivity giving you more flexibility when placing subwoofers powered speakers and other audio components in a room. All without sacrificing performance.
Quick and Easy 3-Minute Setup
The transmitter and receiver come pre-paired and setup takes only minutes:
Connect the transmitter to an AV receiver TV or other audio sources via RCA
Connect the receiver to a subwoofer powered speaker power amplifier or other line-level devices
Make sure both the transmitter and receiver are receiving power (through included wall adapter or USB source)
Wait a few seconds for the adapters to sync and youre ready
Up to three receivers can be paired to one transmitter to create a multi-room distributed audio system or for use with multiple powered subwoofers or speakers
What's in the Box
Wireless Transmitter
Wireless Receiver
Two AC Power Adapters
Two USB cables for AC power adapter
Two Mono RCA to Mono RCA cables
Two Velcro
Quickstart Guide
Specifications
Transmitter:Analog input level: maximum 2Vrms
Minimum power: 5V @0.5A
Receiver:Analog output level: maximum 1Vrms
Minimum power requirement: 4.75V @0.3A
Key Specifications:Deters against both in and out of band sources of interference including microwaves wireless cameras cordless phones Bluetooth devices and more
Operates seamlessly alongside 802.11b/g/n Wi-Fi
Automatic receiver antenna diversity minimizes fading and multi-path effects
Seamless RF band/channel switching
RF Band Tri-Band (auto switching) (2.4/5.2/5.8 GHz) finds the best solution and connects
Three RF frequency ranges for each frequency band:Band 1: 2400-2483.5MHz
Band 2: 5150-5250MHz
Band 3: 5725-5875MHz
22 Mbps wireless air