Unitek International Group Limited
*Product availability is subject to suppliers inventory
Model | Y-S1203A |
---|---|
Color | Space Gray |
Connector A | M.2 |
Model | m.2 |
Unitek Tool-Free USB 3.1 Gen2 (10Gbps) Type-C to M. 2 SSD NVMe Enclosure
Specifications:
Product model: S1203A
Upstream: USB-C (Male)
Downstream: M. 2 (Female)
Cable Length: 30 cm
Color: Black / Grey
How to use
1. Press the lock button on the product;
2. Pull out the PCBA board;
3. Insert the M. 2 SSD diagonally down to the PCIe / NVMe slot;
4. Gently press down on the M. 2 SSD with your fingers and snap it into the plastic snap-on case. You could push the buckle outward to release it when you like to disassemble
Note:
1. When installing M. 2 SSDs, please be careful of static electricity (it is recommended that don't place your hands on metal objects).
2. With the M Key interface which belongs to the NVMe protocol channel. When installing the M. 2 SSD for this product, please check the interface and protocol channel of the hard disk.
3. Although the USB port of the product supports hot-swapping when installing M. 2 SSD, it must be unplugged all power.
4. When inserting the SSD, should be as gentle as possible to avoid scratching the components on the motherboard.
5. When disassembling the hard disk case, please save all data properly to prevent loss.
6. Since Windows 10 and above and Mac OS are the best compatible with NVMe, this product is recommended to get better transmission performance in Windows 10 or higher or Mac OS system.
Packaging Content:
1 x USB 3.1 Gen2 Type-C to M. 2 SSD (NVMe) Enclosure
1 x USB-C to USB-C Data Cable
1 x USB-C to USB-A Data Cable
1 x Heat Sink
1 x Silicone Pad
1 x User Manual