StarTech MCMGBSCSM10 Fiber Media Converter - 1000Base-LX - 10 km - Single Mode - Fiber to Ethernet Converter - Fiber to Copper Converter
Convert and extend a Gigabit Ethernet connection up to 10km over SM SC fiber - F
1.25G SFP Transceiver Module 1000Base-SX, 850nm MMF, up to 550 meters, Compare to Intel
ASF85-24-X2-DASF85-24-X2-D is a 1.25Gbps SFP transceiver supporting up to 550 meters transmission over OM3 MMF Fiber, following IEEE 802.3ab and SFP MSA 1000Base-SX.The SFP transceiver consists of VCSEL laser TOSA, PIN (tia) ROSA, Driver IC and eeprom I2C unit.Features:1000Base-SXData Rate: 1.25Gb/sInterface: Dual LC connectors850nm VCESL Laser Transmitter550 meters transmission over OM3 MMF CableSingle 3.3V Power and TTL Logic InterfaceHot-Pluggable SFP FootprintCompliant with IEEE 802.3abCompliant with SFP MSAWith DDM/DOMTemp. Range(?): 0~70Applications:Gigabit EthernetFiber ChannelOther Optical Links
10Gtek Transceivers Co., LTD
1.25G SFP-T, 1000BASE-T Copper Transceiver Module, SFP to RJ45 Transceiver Module , Compatible with Arista SFP-1G-T-PCW
ASF-GE-T10Gtek's ASF-GE-T is a 1000Base-T Copper RJ45 SFP Transceiver, designed in with Marvell 88E1111 PHY chip following IEEE 802.3ab and SFP MSA, supporting up to 100-meter transmission over CAT.5eFeatures:1000Base-TData Rate: 1.25Gb/sInterface: RJ-45100 meters transmission over CAT.5eCompliant with IEEE 802.3abCompliant with SFP MSAHot Pluggable SFP footprint+3.3V single power supplyTemp. Range(?): 0~70RoHSApplications:1.25 Gigabit Ethernet
10Gtek Transceivers Co., LTD
TP-Link MC200CM Gigabit RJ45 to Gigabit Multi-Mode SC Fiber Media Converter
TP-Link MC200CM Gigabit RJ45 to Gigabit Multi-Mode SC Fiber Media Converter
Overview:
The MC200CM is a media converter designed to convert 1000BASE-SX fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX standards, the MC200CM is designed for use with multi-mode fiber cable utilizing the SC-Type connector. The MC200CM supports shortwave (SX) laser specification at a full wire speed forwarding rate. It works at 850nm on both transmitting and receiving data.
Other features of this module include the ability to be used as a stand-alone device (no chassis required) or with TP-LINK´s 19´system chassis, Auto MDI/MDI-X for TX port, and front panel status LEDs. The MC200CM will transmit at extended fiber optic distances utilizing multi-mode fiber up to 0.55 kilometers (0.342 miles).
Features:
Works at 1000Mbps in Full-Duplex mode for both TX port and FX port
Supports auto MDI/MDIX for TX port
Provides switch configuration of Force /Auto transfer mode for FX port
Extends fiber distance up to 0.5km (0.31 miles)
Easy-to-view LED indicators provide status to monitor network activity easily
External power supply
Specification:
MEDIA CONVERTER & MODULE
Standards and Protocols
IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x
Basic Function
Full Duplex Flow Control (IEEE 802.3x)
Extends fiber distance up to 0.5km using 50/125um fiber
Extends fiber distance up to 0.22km using 62.5/125um fiber
Ports
1 1000M SC/UPC port
1 1000M RJ45 port (Auto MDI/MDIX)
Wave Length
850nm
Network Media 1000BASE-FX
Multi-mode Fiber
Network Media 1000BASE-T
UTP category 5, 5e cable (maximum 100m)
EIA/TIA-568 100O STP (maximum 100m)
LED Indicators
PWR, LINK, RX
Dimensions (W*D*H)
3.7*2.9*1.1 in. (94.5*73.0*27.0 mm)
Power Supply
External Power Adapter
Max Power Consumption
5.5W
Safety & Emission
FCC, CE, RoHS
Environment
Operating Temperature: 0?~40? (32?~104?)
Storage Temperature: -40?~70? (-40?~158?)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
SFP Multi-Mode 1000Base-SX Transceiver Module for Cisco GLC-SX-MMD, Cisco Meraki, Ubiquiti, Netgear, D-Link, Supermicro, Mikrotik (MMF, 850nm, 550-Met
***** **********Best Quality Guranteed. *****Duplex LC, reach to 550m (1804 Feet); *****Universal Compatible for Cisco GLC-SX-MMD, Ubiquiti UF-MM-1G, Netgear AGM731F, D-Link, Supermicro, Mikrotik, work perfectly on Switch, Router, media converter; *****Each transceiver will 100% test to confirm compatibility before delivery. *****Hot-pluggable, Easy to Use, Connected with multi-mode Fiber. *****3-year Warranty, 30 Days Free-returned, Free Lifelong Technology Support. If you have any questions, please feel free to contact us: )
SFP Multi-Mode 1000Base-SX Transceiver Module for Cisco GLC-SX-MMD, Cisco Meraki, Ubiquiti, Netgear, D-Link, Supermicro, Mikrotik (MMF, 850nm, 550-Meter, LC, DDM)
$ 19.62 $ 20.02
2% Off
Colored 10G SFP+ DAC Cable Twinax SFP Cable for Cisco SFPH10GBCU4M Dlink Supermicro Netgear Mikrotik 4Meter13ft
***** **********Best Quality Guranteed. *****10GbE SFP+ to SFP+ DAC Direct Attach Copper Twinax Cable, Passive, 4-Meter (13ft), 24AWG. *****10G SFP+ Cable can connect switch, router, server, NIC, or other fiber optic equipments with SFP+ ports for Network Attached Storage, Storage Area Network, and High Performance Computing. *****Widely compatible with Cisco, Netgear, D-link, Supermicro, Mikrotik, ZTE, Quanta, Solarflare, PaloAlto, F5, Open Switch, etc devices. *****In 's Signal Integrity Lab, we 100% passed TDR & VNA tested. And each DAC Cable is individually tested on switches before delivery. *****Backed by 30 Days Free-returned, 5-Year Free Warranty and Lifetime Technology Support. is a manufacturer of Direct Attach Copper Cable, Customized service also is available.
SFP+ to RJ45 for Arista SFPET BaseT SFP+ Copper Transceiver Module RJ45 30Meters
***** **********Best Quality Guranteed. *****100% Compatible It's BASE-T SFP+ Transceiver compatible for Arista SFP-E-T*****Wide Compatible It's also compatible for open source brands like Ubiquiti, Unifi, Broadcom, Netgear, D-link, Mikrotik, TP-link*****SFP RJ45 Copper BASE-T igabit Ethernet SFP+ transceiver module over Cat6a/ Cat7 cable, 10gbps, 30m, RJ45 connector, hot-pluggable*****3 WARRANTY 30-Days Free-returned, 60-Days Free-replacement, 3-Years Free-maintenance*****STANDARDS SFF-8431 and SFF-8432 MSA Compliant, IEEE 802.3 az
E70-868T14S2 ARM CC1310 868mhz 25mW IPX Stamp Hole IOT uhf Wireless Transceiver Transmitter Receiver UART CC1310 Module
E70-868T14S2 ARM CC1310 868mhz 25mW IPX Stamp Hole IOT uhf Wireless Transceiver Transmitter Receiver UART CC1310 Module
3.3V UART serial to RS485 SP3485 Transceiver Converter Communication Module
3.3V UART serial to RS485 SP3485 Transceiver Converter Communication Module
Hummingbird Networks Brand Compatible for Brocade 100G-QSFP28-LR4L-2KM QSFP28 LR4 Lite SMF, 2KM, DDM
Hummingbird Networks Brand Compatible for Brocade 100G-QSFP28-LR4L-2KM QSFP28 LR4 Lite SMF, 2KM, DDM - 100G-QSFP28-LR4L-2KM-HN
Gaming Mouse Pad Forest Background Pattern XXL XL Large Mouse Pad Mat Long Extended Mousepad Desk Pad Non-Slip Rubber Mice Pads Stitched Edges Thin Pa
?Material: Large Mouse pad is made of a durable heat-resistant polyester fabric top. Very good material. Backed with a neoprene rubber non-slip backing, keeps the mouse pad from sliding.. Ensure prolonged use without deformation and degumming. ?Size: 31.5 x 13.8 x 0.08 inches (800mm x 360mm x 2mm); Weight: 369g / 13oz. We did not make this large mouse pad too thick, we think too thick will cause the surface is very soft. This thickness is just right, thin and simple. ?Durable: The design is permanent and it will not peel off or wipe off. Designed with sublimation heat-transfer inks to make for a long-lasting print. The Waterproof coating prevents damage from spilled drinks or other accidents. ?Elegant: We thought it was not just a mouse pad to use, but a piece of art that could be decorated. This mouse pad is a beautiful unique gift, as a home or as a office gift and of course a respected present for everyone. ?Guarantee:We believe that our large gaming mouse pad, no matter the quality or appearance, if there is any problem, please contact us, we will solve it for you within 24 hours.
SFP Transceiver SingleMode Gigabit MiniGBIC Module 1000BASELXLH Compatible for Netgear AGM732F SMF 1310nm 10km Dual LC DOM 2 Pack
***** **********Best Quality Guranteed. *****Compatible for Netgear AGM732F and other open equipments with 1G SFP port. 2-Pack*****1000Base-LX Gigabit Ethernet, 1.25 Gbps, 1310nm wavelength, 10km reach, Singlemode, Dual LC connector. *****Hot-Pluggable SFP Transceiver Module, PLUG and PLAY, with Advanced DDM Function to monitor real-time parameter and state on fiber links. *****100% Each transceiver is individually done performance test and compatibility test in our Test center before packing. *****Enjoy 30-day free-returned and 3-year warranty service
4Pack 125G SFP Transceiver 1000BaseT RJ45 Copper Module for Ubiquiti UFRJ451G and Other Open Switches up to 100m
Size: 1000Base-T: 100m | Color: 4 packFor Ubiquiti EdgeSwitch/EdgeRouter Transceiver 1000BASE-T SFP transceiver module for Category 5e copper wire, RJ45 connector Data Rate: 1.25G b/s Reach: 100m Fiber Type: CAT5E DDM/DOM: No Temp. Range (C): 0~70 Application: Ubiquiti EdgeRouter: ER-X-SFP ERPro-8 Ubiquiti EdgeSwitch: ES-16-150W ES-24-250W ES-24-500W ES-48-500W ES-24-LITE ES-48-LITE ES-12F ES-8-150W
SFP+ Twinax Cable, Direct Attach Copper(DAC) Passive Cable, 7-Meter, for Cisco SFP-HB-CU7M, Ubiquiti, D-Link, Supermicro, Netgear, Mikrotik, ZTE
***** **********Best Quality Guranteed. *****Base-CU, SFP+ to SFP+ Connetor, Passive, 7 meters, 24AWG; *****Compatible with Cisco, Ubiquiti, D-link, Supermicro, Netgear, Mikrotik, ZTE, Quanta, Solarflare, PaloAlto, F5, etc. *****All products are passed by TDR & VNA tests in our Signal Integrity Lab. *****Widely used in data centers, storage area networks, Network Attached Storage, high performance computing etc. *****30 days free-returned, 3-year free warranty and free lifetime technical support.
QSFP+ DAC Cable BASECR4 Passive Direct Attach Copper Twinax QSFP Cable for Cisco QSFPHCU3M Supermicro Open Switch Devices 3Meter10ft
***** **********Best Quality Guranteed. *****bE QSFP+ to QSFP+ DAC Direct Attach Copper Twinax Cable, Passive, 3-Meter (10ft), 28AWG. *****QSFP+ Cable can connect switch, router, server, NIC, or other fiber optic equipments with QSFP+ ports for Network Attached Storage, Storage Area Network, and High Performance Computing. *****Widely compatible with Cisco QSFP-H-CU3M, and other open switch devices. *****In 's Signal Integrity Lab, we 100% passed TDR & VNA tested. And each DAC Cable is individually tested on switches before delivery. *****Backed by 30 Days Free-returned, 3-Year Free Warranty and Lifetime Technology Support. is a manufacturer of Direct Attach Copper Cable, Customized sevice also is available.
Copper RJ45 Transceiver Gigabit Module 1000Base-T Compatible for Cisco GLC-T/-GE-T, 10 Pack
***** **********Best Quality Guranteed. *****1000BASE-T transceiver, copper RJ45, 100m reach*****100% Compatible to work with Cisco switches using GLC-T Copper *****Easy installation, plug in and work, fully hot-pluggable*****Enjoy 30-day money back guarantee and 3-year warranty service*****HiFiber has a large stock with immediate delivery. You are kindly be suggested to choose shipment from HiFiber if there is no enough stock fulfilled by
com Cisco GLC-T Compatible SFP Module - 1000BASE-T - SFP to RJ45 Cat6/Cat5e - 1GE Gigabit Ethernet SFP - RJ-45 100m - Cisco Firepower, ASR920, IE2000
Style: GLC-T | Size: Single100% Cisco Compatible. Guaranteed. The GLCTST is a Cisco GLC-T compatible copper transceiver module that has been designed, programmed and tested to work with Cisco brand compatible switches and routers. It delivers dependable 1 GbE connectivity over copper cable, for 1000BASE-T compliant networks, with a maximum distance of up to 100 m (328 ft). Technical Specifications: Maximum Data Transfer Rate: 1 Gbps Type: Copper Connection Type: RJ45 Connector Maximum Transfer Distance: 100 m (328 ft) MTBF: 4, 655, 371 hours Power Consumption: Less than 1.3 Watts Digital Diagnostics Monitoring (DDM): No This SFP module is hot-swappable making upgrades and replacements seamless by minimizing network disruptions.. com SFPs All. com SFP & SFP+ transceiver modules are backed by a LIFETIME WARRANTY and FREE LIFETIME MULTILINGUAL TECHNICAL SUPPORT.. com offers a wide variety of SFP modules and direct-attach SFP Cables, providing the dependability and reliability you need to ensure consistent network performance.
SFP-1G-T Compatible with SFP-1G-T 1000BASE-T SFP Copper Transceiver Module
Capacity: SFP 1310nm 2Km | Color: Foundry-AND-MORE GLC-FE-100FX SFP 1310nm 2Km DOM Transceiver Module for Foundry, Meraki, Compag, Check point, Blade networks, IMC netowrks, Mellanox, The GLC-FE-100FX SFP transceivers are high performance, cost effective modules supporting dual data-rate of 1GBps and 550m transmission distance with MMF
AddOn 407-Bbor-AO SFP Transceiver
This Dell 407-BBOR compatible SFP transceiver provides 1000Base-SX throughput up to 550M over multi-mode fiber (MMF) using a wavelength of 850nm via an LC connector. It is guaranteed to be 100% compatible with the equivalent Dell transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. It is built to meet or exceed the specifications of Dell, as well as to comply with MSA (Multi-Source Agreement) standards to ensure seamless network integration. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty.
CEACENT AN1471 10G SFP+ Single mode Module LR 1310nm Transceiver
CEACENT AN1471 10G SFP+ Single mode Module LR 1310nm Transceiver
SFP 1000Base-SX, 850nm MMF, up to 550 Meters, for Cisco GLC-SX-MMD/GLC-SX-MM/SFP-GE-S, Meraki MA-SFP-1GB-SX, Ubiquiti UF-MM-1G, Mikrotik S-85DLC05D, D
***** **********Best Quality Guranteed. *****Data Rate: b/s*****Wavelength: 850-nm*****Reach: up to 550 meters*****Fiber Type: Dual LC OM3 multi-mode fiber*****Wide Compatibility - for Cisco, Meraki, Ubiquiti, Mikrotik, D-Link, Supermicro, TP-Link, Broadcom, Linksys and Other Open Switches.
Gaming Mouse Pad Forest Background Pattern XXL XL Large Mouse Pad Mat Long Extended Mousepad Desk Pad Non-Slip Rubber Mice Pads Stitched Edges Thin Pa
?Material: Large Mouse pad is made of a durable heat-resistant polyester fabric top. Very good material. Backed with a neoprene rubber non-slip backing, keeps the mouse pad from sliding.. Ensure prolonged use without deformation and degumming. ?Size: 31.5 x 13.8 x 0.08 inches (800mm x 360mm x 2mm); Weight: 369g / 13oz. We did not make this large mouse pad too thick, we think too thick will cause the surface is very soft. This thickness is just right, thin and simple. ?Durable: The design is permanent and it will not peel off or wipe off. Designed with sublimation heat-transfer inks to make for a long-lasting print. The Waterproof coating prevents damage from spilled drinks or other accidents. ?Elegant: We thought it was not just a mouse pad to use, but a piece of art that could be decorated. This mouse pad is a beautiful unique gift, as a home or as a office gift and of course a respected present for everyone. ?Guarantee:We believe that our large gaming mouse pad, no matter the quality or appearance, if there is any problem, please contact us, we will solve it for you within 24 hours.
2Pcs ESP8266 NodeMCU, CP2102 ESP-12E WiFi Internet Development Board Open Source Serial Wireless Module for Arduino IDE/Micropython
Color: Pack of 2ESP8266 NodeMcu ESP8266 Module ESP-12F NodeMcu LUA CP2102 Internet WiFi Development Board Works for Arduino IDE/MicropythonWhy ESP8266: ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor. Instruction & Steps of How to use: 1. Download the Arduino IDE, Firmware link: http: //github. com/nodemcu/nodemcu-firmware; The Data download access to the website: http: //www. nodemcu. com; Test Video: http: //www. youtube. com/watch? v=Gh_pgqjfeQc. 2. Install the IDE. 3. Set up your Arduino IDE as: Go to File->Preferences and copy the URL below to get the ESP board manager extensions: http: //arduino. esp8266. com/stable/package_esp8266com_index. json Placing the "http: //" before the URL and let the Arduino IDE use it... otherwise it gives you a protocol error. 4. Go to Tools > Board > Board Manager> Type "esp8266" and download the Community esp8266 and install. 5. Set up your chip: Tools -> Board -> NodeMCU 1.0 (ESP-12E Module)Tools -> Flash Size -> 4M (3M SPIFFS) Tools -> CPU Frequency -> 80 MhzTools -> Upload Speed -> 921600ToolsPort (whatever it is) 6. Download and run the 32 bit flasher exe at Github(Search for nodemcu/nodemcu-flasher/tree/master/ at Github) github. com/nodemcu/nodemcu-flasher/tree/master/Win32/Release Or download and run the 64 bit flasher exe at: github. com/nodemcu/nodemcu-flasher/tree/master/Win64/Release7. In Arduino IDE, look for the old fashioned Blink program. Load, compile and upload. 8. Go to FILE> EXAMPLES> ESP8266> BLINK, it will start blinking. Package including: 2 * ESP8266 ESP -12F NodeMcu Development Board
SFP Transceiver Gigabit Module 1000Basesx LC MultiMode 850nm Module up to 550m Compatible with Ubiquiti UFMM1G
***** **********Best Quality Guranteed. *****Compatibility - fit for Ubiquiti UF-MM-1G and other open switches, please contact us, any product quality and compatibility issues*****Main Specs - 1000Mbps data rate, multi-mode, LC duplex connector, 850nm wavelength, up to 550m transmission distance, DDM support*****Usage - rotat the ring latch down at 90 degree angle to unlock, then insert it to the port*****Application - used in fiber switches, routers, NIC, server or other fiber optic equipments with gigabit sfp ports*****30 days Free-Returned, 3 years Free Warranty and lifetime technology support
BLACK BOX CORPORATION LHC006A-R4 COMPACT MEDIA CONVERTER, 100BASE-TX/100B
BLACK BOX CORPORATION LHC006A-R4 COMPACT MEDIA CONVERTER, 100BASE-TX/100BCOMPACT MEDIA CONVERTER, 100BASE-TX/100B MPN:LHC006A-R4
Hummingbird Networks Brand Compatible for Juniper EX-SFP-1GE-T Copper SFP 1000Base-T
Hummingbird Networks Brand Compatible/Replacement for Juniper & nbsp; EX-SFP-1GE-T 1000BASE-T & nbsp; Copper SFP RJ45 Features Supports SFP 1000BASE-T operation in host systems with & nbsp; SGMII interface, SFP RJ45 Up to 1.25G bps bi-direction data links Up to 100m transmission over UTP Category 5 Cable Hot-Swappable if your device supports Juniper SFP Lifetime Warranty Plugs into Copper SFP port Compliant to SFP Electrical & Mechanical MSA 0°C to +70°C case operating temperature range Compliant with product safety standards Product Overview The Hummingbird Networks 100% Compatible Juniper & nbsp; EX-SFP-1GE-T 1000BASE-T Copper SFP are based on the SFP Multi Source Agreement (MSA). It is compatible with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE Std 802.3. This & nbsp; SFP RJ45 module is for transmission at 1.25G bps over universal twisted pair (UTP) Category 5 cable. It supports Ethernet standards which make it ideally suited for 1000BASE-T data communications. It offers customers a wide variety of Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and switch-to-switch applications.
F5 Networks OPT-0025-00 Compatible 40GBASE-SR4 QSFP+ 850nm 150m DOM Transceiver
Product Details
F5 Networks Genuine:OPT-0025-00
Form Type: QSFP+
Max Data Rate: 41.25Gbps
Wavelength: 850nm
Max Cable Distance: 150m @ OM4 MMF
Interface: MTP/MPO
Optical Components: VCSEL 850nm
Cable Type: MMF
DOM Support: Yes
TX Power: -5.6~3dBm
Receiver Sensitivity:
shenzhen he-link technology ltd.
NETCNA CWDM-XFP-1551-80KM (Cisco 100% Compatible Optical Transceiver)
Features Form Factor: XFP Device Type: Transceiver module Interface (Bus) Type: Plug-in module Connectivity Technology: Wired Application: 10GBASE-CWDM Data Transfer Rate: 10Gbps Wavelength: 1551nm Max Distance: 80km Fiber Type: SMF Connector: DuplexLC DDM: With DDM Operating Temperature: 0~70A C Compliant with MSA XFP Specification
C2G Avaya/Nortel Compatible 1000Base-SX MMF SFP (Mini-GBIC) Transceiver, TAA Compliant (AA1419048-E6-LEG)
Functionally identical to Avaya/Nortel AA1419048-E6 High speed 1-Gigabit connectivity Transceiver type SX allows for connections up to 550m LC ports designed for use with Multimode fiber 850nm wavelength signaling This Avaya/Nortel AA1419048-E6 compatible SFP transceiver provides 1000Base-SX throughput up to 550m over multi-mode fiber (MMF) at a wavelength of 850nm using a LC connector. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. Our transceiver is guaranteed to be 100% compatible with the equivalent Avaya/Nortel transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. It is built to meet or exceed the specifications of Avaya/Nortel, as well as to comply with multi-source agreement (MSA) standards to ensure seamless network integration.
ADDON FCLF8522P2BTL-AO FINISAR SFP 100M FCLF8522P2BTL
ADDON FCLF8522P2BTL-AO FINISAR SFP 100M FCLF8522P2BTLFINISAR SFP 100M FCLF8522P2BTL MPN:FCLF8522P2BTL-AO821455048634
20m (66ft) Avago AFBR-2CAR20Z Compatible 10G SFP+ Active Optical Cable
Product Details Avago Genuine AFBR-2CAR20Z Vendor Name HE-LINK Connector Type SFP+ to SFP+ Max Data Rate 10Gbps Cable Type Active Optical Cable Cable Length 20m( 65.62 ft) Jacket Material PVC (OFNR) Temperature 0 to 70°C (32 to 158°F) HTS-Harmonized Code 8544700000 Protocols 1x InfiniBand QDR, DDR, SDR, 10G Gigabit Ethernet, Fibre Channel
shenzhen he-link technology ltd.
1m (3ft) Arista Networks AOC-Q-Q-40G-1M Compatible 40G QSFP+ Active Optical Cable
Product Details Arista Networks Genuine: AOC-Q-Q-40G-1M Vendor Name: HE-LINK Connector Type: QSFP+ to 4 SFP+ Data Rate: 40Gbps Cable Type: Active Optical Cable Cable Length: 1m( 3.28 ft) Jacket Material: PVC (OFNR) Temperature: 0 to 70°C (32 to 158°F) HTS-Harmonized Code: 8544700000 Quality Certification Quality and standards are the foundation of HE-LINK. We are dedicated to providing customers with outstanding, standards-compliant products and services. HE-LINK has passed many quality system verifications, like CE, RoHS, FCC, established an internationally standardized quality assurance system and strictly implemented standardized management and control in the course of design, development, production, installation and service. Please Note: Installing a third party transceiver does not void your network equipment warranty. Network equipment manufacturers all have guidelines stating that warranty support on their products will not be affected. Lifetime Warranty All the fiber optic products in HE-LINK are fully warranted against defects in material and workmanship with a lifetime guarantee. This warranty does not cover damage caused by accident, improper care, improper use, negligence, normal wear and tear, or the natural breakdown of colors and materials over extended time and use. Packaging & Labeling This easy to handle and well-protected transceiver package has been labelled and marked to default HE-LINK standards. Customized label or package solutions are available on request. OEM & Customs Partnering with a variety of world class OEM manufacturers for over 8 years, HE-LINK is able to provide customized high-quality and cost-effective solutions for all needs and specifications, including optical design, mechanical design, Printed Circuit Board (PCB) layout and electrical design, software & firmware design, integrated assembly, specific labels, etc. With surging sales and favorable customer feedback, HE-LINK has been expanding rapidly across the world and is becoming the leading provider of the optical communication industry. If you are interested in our products, please feel free to contact us at sales@HE-LINK. COM. Shipment HE-LINK can ship via FedEx, DHL, UPS, TNT, EMS or a customer-arranged carrier. Items are often shipped the same day (some transceivers can be out the door in 20 minutes). If we have no stock in any of our global warehouses, the shipment will be delayed for 1-2 days. DHL will take 2-4 business days for delivery and FedEx only needs 1-3 business days. For Spain, Italy, Brazil and certain other countries, items will take longer to arrive due to the customs clearance period. Choose the Right Path to Your Modern Data Center HE-LINK. COM offers a variety of integrated, holistic physical infrastructure solutions for data center intra-rack and inter rack applications. 40G cables, including MTP cables, DACs, AOCs, and LC fiber patch cables, offer multiple connectivity options in data centers. Choose the right path to your modern data center will help you save cost, save time and better management. Solution 1 --- Saving Cost QSFP+ To 4xSFP+ Passive Direct Attach Copper Breakout Cable is a kit, which includes the
shenzhen he-link technology ltd.
MGBIC-BX40-D-1310/MGBIC-BX40-U-1550 Extreme Networks Compatible 100M 1310/1550nm BiDi 40km Transceiver
MGBIC-BX40-D-1310/MGBIC-BX40-U-1550 Extreme Networks Compatible 100M 1310/1550nm BiDi 40km Transceiver
One pair price.
Part Number: MGBIC-BX40-D-1310/MGBIC-BX40-U-1550
Compatible: Extreme Networks
Data Rate: 125Mbps
Wavelength: 1310nm/1550nm
Connector: Single LC
Cable Type: SMF
Reach Distance: 40km
Operating Temperature Range: 0°C to 70°C
Applications: Fast Ethernet
shenzhen he-link technology ltd.
25m (82ft) Avago AFBR-7QER25Z Compatible 40G QSFP+ Active Optical Cable
Product Details Avago Genuine: AFBR-7QER25Z Vendor Name: HE-LINK Connector Type: QSFP+ to QSFP+ Data Rate: 40Gbps Cable Type: Active Optical Cable Cable Length: 25m( 82.02 ft) Jacket Material: PVC (OFNR) Temperature: 0 to 70°C (32 to 158°F) HTS-Harmonized Code: 8544700000 Quality Certification Quality and standards are the foundation of HE-LINK. We are dedicated to providing customers with outstanding, standards-compliant products and services. HE-LINK has passed many quality system verifications, like CE, RoHS, FCC, established an internationally standardized quality assurance system and strictly implemented standardized management and control in the course of design, development, production, installation and service. Please Note: Installing a third party transceiver does not void your network equipment warranty. Network equipment manufacturers all have guidelines stating that warranty support on their products will not be affected. Lifetime Warranty All the fiber optic products in HE-LINK are fully warranted against defects in material and workmanship with a lifetime guarantee. This warranty does not cover damage caused by accident, improper care, improper use, negligence, normal wear and tear, or the natural breakdown of colors and materials over extended time and use. Packaging & Labeling This easy to handle and well-protected transceiver package has been labelled and marked to default HE-LINK standards. Customized label or package solutions are available on request. OEM & Customs Partnering with a variety of world class OEM manufacturers for over 8 years, HE-LINK is able to provide customized high-quality and cost-effective solutions for all needs and specifications, including optical design, mechanical design, Printed Circuit Board (PCB) layout and electrical design, software & firmware design, integrated assembly, specific labels, etc. With surging sales and favorable customer feedback, HE-LINK has been expanding rapidly across the world and is becoming the leading provider of the optical communication industry. If you are interested in our products, please feel free to contact us at sales@HE-LINK. COM. Shipment HE-LINK can ship via FedEx, DHL, UPS, TNT, EMS or a customer-arranged carrier. Items are often shipped the same day (some transceivers can be out the door in 20 minutes). If we have no stock in any of our global warehouses, the shipment will be delayed for 1-2 days. DHL will take 2-4 business days for delivery and FedEx only needs 1-3 business days. For Spain, Italy, Brazil and certain other countries, items will take longer to arrive due to the customs clearance period. Choose the Right Path to Your Modern Data Center HE-LINK. COM offers a variety of integrated, holistic physical infrastructure solutions for data center intra-rack and inter rack applications. 40G cables, including MTP cables, DACs, AOCs, and LC fiber patch cables, offer multiple connectivity options in data centers. Choose the right path to your modern data center will help you save cost, save time and better management. Solution 1 --- Saving Cost QSFP+ To 4xSFP+ Passive Direct Attach Copper Breakout Cable is a kit, which includes the (1) QSFP, (4) SF
shenzhen he-link technology ltd.
AddOn Extreme Networks 10053 Compatible 1000Base-ZX SFP Transceiver (SMF, 1550nm, 70km, LC)
AddOn Extreme Networks 10053 Compatible 1000Base-ZX SFP Transceiver (SMF, 1550nm, 70km, LC)
Addon Fortinet Fg-tran-gc Compatible Taa Compliant 10/100/1000base- - FG-TRAN-GC-AO
Addon fortinet fg-tran-gc compatible taa compliant 10/100/1000base-tx sfp transcaddon fortinet fg-tran-gc compatible taa compliant 10/100/1000base-tx sfp transceiver (copper, 100m, rj-45) Manufacturer : Add-on-computer Peripherals, L
Add-On Technology Co., Ltd.
Addon Sfp-51dh Comp Sfp Taa Xcvr - SFP-51DH-AO
Addon sfp-51dh comp sfp taa xcvraddon sfp-51dh comp sfp taa xcvr Manufacturer : Add-on-computer Peripherals, L
Add-On Technology Co., Ltd.
AddOn ZTE SFP-GE-S10K Compatible 1000Base-LX SFP Transceiver (SMF, 1310nm, 10km, LC)
AddOn ZTE SFP-GE-S10K Compatible 1000Base-LX SFP Transceiver (SMF, 1310nm, 10km, LC)
2m (7ft) Dell Force10 CBL-QSFP-40GE-PASS-2M Compatible 40G QSFP+ Passive Direct Attach Copper Cable
Product Details
Dell Genuine CBL-QSFP-40GE-PASS-2M
Vendor Name HE-LINK
Connector Type QSFP+ to QSFP+
Max Data Rate 40Gbps
Cable Type Passive Copper Cable
Wire AWG 30AWG
Cable Length 2m(6.56ft)
Jacket Material PVC(OFNR)
Temperature 0 to 70°C (32 to 158°F)
HTS-Harmonized Code 8544700000
Quality Certification
Quality and standards are the foundation of HE-LINK. We are dedicated to providing customers with outstanding, standards-compliant products and services. HE-LINK has passed many quality system verifications, like CE, RoHS, FCC, established an internationally standardized quality assurance system and strictly implemented standardized management and control in the course of design, development, production, installation and service.
Please Note: Installing a third party transceiver does not void your network equipment warranty. Network equipment manufacturers all have guidelines stating that warranty support on their products will not be affected.
Lifetime Warranty
All the fiber optic products in HE-LINK are fully warranted against defects in material and workmanship with a lifetime guarantee. This warranty does not cover damage caused by accident, improper care, improper use, negligence, normal wear and tear, or the natural breakdown of colors and materials over extended time and use.
Packaging & Labeling
This easy to handle and well-protected transceiver package has been labelled and marked to default HE-LINK standards. Customized label or package solutions are available on request.
OEM & Customs
Partnering with a variety of world class OEM manufacturers for over 8 years, HE-LINK is able to provide customized high-quality and cost-effective solutions for all needs and specifications, including optical design, mechanical design, Printed Circuit Board (PCB) layout and electrical design, software & firmware design, integrated assembly, specific labels, etc. With surging sales and favorable customer feedback, HE-LINK has been expanding rapidly across the world and is becoming the leading provider of the optical communication industry. If you are interested in our products, please feel free to contact us at sales@HE-LINK.COM .
Shipment
HE-LINK can ship via FedEx, DHL, UPS, TNT, EMS or a customer-arranged carrier. Items are often shipped the same day (some transceivers can be out the door in 20 minutes). If we have no stock in any of our global warehouses, the shipment will be delayed for 1-2 days. DHL will take 2-4 business days for delivery and FedEx only needs 1-3 business days. For Spain, Italy, Brazil and certain other countries, items will take longer to arrive due to the customs clearance period.
shenzhen he-link technology ltd.
EDGE Perle SFP (mini-GBIC) Module - For Optical Network 1000Base-SX
MAIN OVERVIEW FEATURES: Application/Usage: Optical NetworkData NetworkingInterfaces/Ports Details: 1 x 1000Base-SX NetworkMedia Type Supported: Optical FiberEthernet Technology: Gigabit EthernetNetwork Technology: 1000Base-SXLimited Warranty: Lifetime
Cisco CWDM-SFP10G-1310-20 Compatible SFP10G-CWDM-1310 1310nm 20km DOM Transceiver
Product ParameterPart Number:SFP10G-CWDM-1310SN:AJA02030121Maximum data rate:11.0957Gbpswavelength:1310nm Interface:LC duplexMax Distance: 20kmPackage:SFP+Transmitter:DFB CWDMFiber type:SMFDOM support:YesTX Power:-6~0dBmReceiving sensitivity:less than -14.4dBmCommercial temperature range:0 to 70°C (32 to 158°F)Compatible brand:Cisco FeaturesSupport Multi Rate 4.9152 Gbps to 10.3125 GbpsSFI electrical interface2-wire interface for integrated Digital Diagnostic monitoringHot pluggableVery low EMI and excellent ESD protection+3.3V power supplyPower consumption less than 1.0WApplicationSONET/SDH10G Ethernet10X Fiber ChannelCPRI/OBSAI
UTSOURCE HOLDING COMPANY LIMITED
3m (10ft) Extreme Networks 40GB-F03-QSFP Compatible 40G QSFP+ Active Optical Cable
Product Details Extreme Networks Genuine: 40GB-F03-QSFP Vendor Name: HE-LINK Connector Type: QSFP+ to 4 SFP+ Data Rate: 40Gbps Cable Type: Active Optical Cable Cable Length: 3m( 9.84 ft) Jacket Material: PVC (OFNR) Temperature: 0 to 70°C (32 to 158°F) HTS-Harmonized Code: 8544700000 Quality Certification Quality and standards are the foundation of HE-LINK. We are dedicated to providing customers with outstanding, standards-compliant products and services. HE-LINK has passed many quality system verifications, like CE, RoHS, FCC, established an internationally standardized quality assurance system and strictly implemented standardized management and control in the course of design, development, production, installation and service. Please Note: Installing a third party transceiver does not void your network equipment warranty. Network equipment manufacturers all have guidelines stating that warranty support on their products will not be affected. Lifetime Warranty All the fiber optic products in HE-LINK are fully warranted against defects in material and workmanship with a lifetime guarantee. This warranty does not cover damage caused by accident, improper care, improper use, negligence, normal wear and tear, or the natural breakdown of colors and materials over extended time and use. Packaging & Labeling This easy to handle and well-protected transceiver package has been labelled and marked to default HE-LINK standards. Customized label or package solutions are available on request. OEM & Customs Partnering with a variety of world class OEM manufacturers for over 8 years, HE-LINK is able to provide customized high-quality and cost-effective solutions for all needs and specifications, including optical design, mechanical design, Printed Circuit Board (PCB) layout and electrical design, software & firmware design, integrated assembly, specific labels, etc. With surging sales and favorable customer feedback, HE-LINK has been expanding rapidly across the world and is becoming the leading provider of the optical communication industry. If you are interested in our products, please feel free to contact us at sales@HE-LINK. COM. Shipment HE-LINK can ship via FedEx, DHL, UPS, TNT, EMS or a customer-arranged carrier. Items are often shipped the same day (some transceivers can be out the door in 20 minutes). If we have no stock in any of our global warehouses, the shipment will be delayed for 1-2 days. DHL will take 2-4 business days for delivery and FedEx only needs 1-3 business days. For Spain, Italy, Brazil and certain other countries, items will take longer to arrive due to the customs clearance period. Choose the Right Path to Your Modern Data Center HE-LINK. COM offers a variety of integrated, holistic physical infrastructure solutions for data center intra-rack and inter rack applications. 40G cables, including MTP cables, DACs, AOCs, and LC fiber patch cables, offer multiple connectivity options in data centers. Choose the right path to your modern data center will help you save cost, save time and better management. Solution 1 --- Saving Cost QSFP+ To 4xSFP+ Passive Direct Attach Copper Breakout Cable is a kit, which includes the
shenzhen he-link technology ltd.
Extreme Networks 10GB-LRLX-SFPP Compatible 1000BASE-LX and 10GBASE-LR SFP+ 1310nm 10km DOM Transceiver
Product Details
Extreme Networks Genuine 10GB-LRLX-SFPP Vendor Name HE-LINK
Form Type SFP+ Max Data Rate 10.3125Gbps
Wavelength 1310nm Max Cable Distance 10km
Interface LC duplex Optical Components DFB 1310nm
Cable Type SMF DOM Support Yes
TX Power -8.2~0.5dBm Receiver Sensitivity < -14.4dBm
Commercial Temperature Range 0 to 70°C (32 to 158°F) HTS-Harmonized Code 8517706000
Quality Certification
Quality and standards are the foundation of HE-LINK. We are dedicated to providing customers with outstanding, standards-compliant products and services. HE-LINK has passed many quality system verifications, like CE, RoHS, FCC, established an internationally standardized quality assurance system and strictly implemented standardized management and control in the course of design, development, production, installation and service.
Please Note: Installing a third party transceiver does not void your network equipment warranty. Network equipment manufacturers all have guidelines stating that warranty support on their products will not be affected.
Lifetime Warranty
All the fiber optic products in HE-LINK are fully warranted against defects in material and workmanship with a lifetime guarantee. This warranty does not cover damage caused by accident, improper care, improper use, negligence, normal wear and tear, or the natural breakdown of colors and materials over extended time and use.
Packaging & Labeling
This easy to handle and well-protected transceiver package has been labelled and marked to default HE-LINK standards. Customized label or package solutions are available on request.
OEM & Customs
Partnering with a variety of world class OEM manufacturers for over 8 years, HE-LINK is able to provide customized high-quality and cost-effective solutions for all needs and specifications, including optical design, mechanical design, Printed Circuit Board (PCB) layout and electrical design, software & firmware design, integrated assembly, specific labels, etc. With surging sales and favorable customer feedback, HE-LINK has been expanding rapidly across the world and is becoming the leading provider of the optical communication industry. If you are interested in our products, please feel free to contact us at sales@HE-LINK.COM .
Shipment
HE-LINK can ship via FedEx, DHL, UPS, TNT, EMS or a customer-arranged carrier. Items are often shipped the same day (some transceivers can be out the door in 20 minutes). If we have no stock in any of our global warehouses, the shipment will be delayed for 1-2 days. DHL will take 2-4 business days for delivery and FedEx only needs 1-3 business days. For Spain, Italy, Brazil and certain other countries, items will take longer to arrive due to the customs clearance period.
shenzhen he-link technology ltd.
S+2332LC80D Mikrotik Compatible Pair of BiDi SFP 10G 80km Transceiver
S+2332LC80D Mikrotik Compatible Pair of BiDi SFP 10G 80km Transceiver
One pair price.
Part Number: S+2332LC80D
Compatible: Mikrotik
Data Rate: 10G
Wavelength: 1270nm/1330nm
Connector: Single LC
Cable Type: SMF
Reach Distance: real distance is 73km
Operating Temperature Range: 0°C to 70°C
Applications: MSA Compliant
shenzhen he-link technology ltd.
70m(229.66ft) Cisco SFP28-25G-AOC70M Compatible 25G SFP28 to SFP28 Active Optical Cable
Product ParameterPart Number:SFP28-25G-AOCSN:AJA08050070Cable length:70m(229.66ft)Cable type:Active Optical CableConnector Type:SFP28 to SFP28Maximum Data Rate: 25Gbps Outer material:PVC(OFNR)Temperature:0 to 70°C (32 to 158°F)Compatible brand: Cisco
UTSOURCE HOLDING COMPANY LIMITED
Tunable DWDM SFP+ 10G 80KM Network Optic Transceiver (1529.16nm~1568.36nm) (Commercial Temperature)
Features:
- Compliant with IEEE802.3ae 10GBase-ZR/ZW
- Compliant with SFP+ MSA
- Hot Pluggable
- APD Receiver
- Dual LC Connector
- 2-wire interface for management and diagnostic monitor
- Single +3.3V power supply
- 99 Tunable Channel
- Transmission distance of 80km fiber
Applications:
- DWDM SONET OC-192 and SDH STM-64
- DWDM 10Gb/s Ethernet ZR/ZW
- DWDM 10Gb/s Fiber Channel
OEM/ODM available
More 10G DWDM SFP+ Transceiver:
SFP+ 10G-DWDMxx-40km-DD (Multi-Rate)
SFP+ 10G-DWDMxx-80km-DD (Multi-Rate)
SFP+ 10G-DWDMxx-80km-DD (Tunable Channel)
SFP+ 10G-DWDMxx-100km-DD
Please contact us for more Customized SPEC transceiver.
*If you want to buy a fiber optic transceiver, please tell us what brand and model name of Host equipment you will apply.
We need to know what coding to be input for you.
Ficer Technology Co., Ltd
Axiom J4858B-AX SFP (mini-GBIC) Transceiver Module for HP
MAIN OVERVIEW FEATURES: Application/Usage: Data Networking,Optical NetworkInterfaces/Ports Details: 1 x LC 1000BASE-SX NetworkMedia Type Supported: Optical FiberFiber Mode Supported: Multi-modeEthernet Technology: Gigabit EthernetNetwork Technology: 1000BASE-SXHeight: 0.5"Width: 0.5"Depth: 2.2"Weight (Approximate): 0.59 ozCompatibility: MSA CompliantEnvironmentally Friendly: YesEnvironmental Certification: RoHS
This Avago Afbr-79eidz Compatible Qsfp+ Transceiver Provides 40gbas - AFBR-79EIDZ-AO
This avago afbr-79eidz compatible qsfp+ transceiver provides 40gbase-sr4 throughthis avago afbr-79eidz compatible qsfp+ transceiver provides 40gbase-sr4 throughput up to 150m over multi-mode fiber at a wavelength of 850nm using a mpo connector. It is guaranteed to be 100% compatible with the equivalent avago transceive Manufacturer : Add-on-computer Peripherals, L
Add-On Technology Co., Ltd.
NETCNA SFP-OC12-IR1 (Cisco 100% Compatible Optical Transceiver)
Features Form Factor: SFP Device Type: Transceiver module Interface (Bus) Type: Plug-in module Connectivity Technology: Wired Application: SONET/OC12 Data Transfer Rate: 622Mbps Wavelength: 1310nm Max Distance: 15km Fiber Type: SMF/MMF Connector: Duplex LC DDM: Without DDM Operating Temperature: 0~70A C Compliant with MSA SFP Specification Lifetime Warranty 100% Compatibility Tested 100% Functionality Tested Performance CertifiedIn-House Product Development Extensive Inventory, RoHS Compliant MSA Part Number: SFP-OC12-IR1 COEM Part Number: SFP-OC12-IR1 Manufacturer Name: Cisco Formfactor Name: SONET SFPData Rate: 622 MbpsCable Type: Single-mode fiberMax Distance: 15 kilometersWavelength: 1310nmConnector: Duplex LCOptical Monitoring: Yes Compatible Devices : SPA-1XOC12-ATM SPA-1XOC12-POS SPA-4XOC12-POS SPA-1XOC12-ATM-V2 SPA-2XOC12-POS SPA-8XOC12-POS Cisco Compatible SFP / OC-12/STM-4 622M SFP IR1, 1310nm, 15km over SMFProduct Name: SFP-OC12-IR1-C Compatible to:SFP-OC12-IR1 Form Factor: SFP Data Rate: 622M Application: OC12-IR1 Wavelength: 1310nm Transmission Media: Single Mode Fiber Reach: 15km Cable Connector: Dual LC Optical Output Power:-15dBm to -8dBm Receiver Sensitivity: -28dBm DOM (Digital Optical Monitoring): Enabled Operating Temperature:0-70 Industrial Temperature Rated:No
HPE JD093B X130 10G SFP+ LC LRM Transceiver
Hp X130 10Gigabit Sfp+ Lc Lrm Transceiver
AddOn Brocade E1MG-100BXU Compatible 100Base-BX SFP Transceiver (SMF, 1310nmTx/1550nmRx, 10km, LC)
AddOn Brocade E1MG-100BXU Compatible 100Base-BX SFP Transceiver (SMF, 1310nmTx/1550nmRx, 10km, LC)
NETCNA DWDM-SFP-3504 (Cisco 100% Compatible Optical Transceiver)
Features Device Type: Cisco Compatible DWDM SFP Package: SFP Data Rate: 1.25Gbps Wavelength: 1535.04nm Max Distance: 80km Distance/Power Budget: 28dB Optical Components ?LD: DFB ?PD: PIN Output Power: 0~4dBm Receiver Sensitivity: -28dBm Power Supply Voltage: 3.3V Connector: Dual LC Fiber Type: SMF Operating Temperature: 0~70A C DDMI: With Application: GE/Fibre Channel Compatibility: 100% Cisco Compatible Lifetime Warranty 100% Compatibility Tested 100% Functionality Tested Performance CertifiedIn-House Product Development Extensive Inventory, RoHS Compliant MSA Part Number: DWDM-SFP-3504 COEM Part Number: DWDM-SFP-3504 Manufacturer Name: Cisco Formfactor Name: DWDM SFPData Rate: 1 Gbps to 2.67 GbpsCable Type: Single-mode fiberMax Distance: 120 kilometersWavelength: 1535.04nmConnector: Duplex LCOptical Monitoring: Yes
Perle CM-1110-SFP Transceiver
Perle CM-1110-SFP Transceiver
Brocade 10G-SFPP-SR-8 8-pack 10 Gbps SR SFP+ Transceiver
Brocade 10Gbase-Sr S Fpp Mmf Lc Connector 8-Pack This Brocade 10Gbase-Sr Sfp Module Is Brand So You Are Assured Of A Durable Product That Offers Investment Protection And Provides Years Of Reliable Service. The Module Offers Improved Reliability An
Cisco SG350X-24 24 Port Managed Layer 3 Switch + (10) .5 Foot CAT6 Cables + 1-Year Extended Warranty
Cisco SG350X-24 24 Port Managed Layer 3 Switch Overview: The Cisco 350X Series Stackable Managed Switches are a new line of stackable managed Ethernet switches that provide the rich capabilities you need to support a more demanding network environment at a very affordable price. The Cisco 350XG models provide 10 Gigabit Ethernet, providing a solid foundation for your current business applications as well as those you are planning for the future. In addition, these switches are easy to deploy and manage without a large IT staff. The SG350X platforms are Cisco's most cost-effective platforms with 10 Gigabit Ethernet and stacking. Product Highlights: Device Type Switch - 24 ports - managed - stackable Ports 24 x 1000Base-T + 2 x combo 10 Gigabit SFP+ + 2 x 10 Gigabit SFP+ Capacity MSTP instances: 16Active VLA Ns: 4096IPv4 routes (static): up to 8000IPv6 routes (static): up to 6000ACL entries: up to 2000 Performance Switching capacity (64-byte packet size): 95.23 MppsSwitching capacity: 128 Gbps Routing Protocol IGM Pv2, IGMP, IGM Pv3, static IPv4 routing, static IPv6 routing, policy-based routing (PBR), MLDv2, MLD, CIDR Model Name: SG350X-24-K9-NA Items Included With Your Purchase: 1 x Cisco SG350X-24P 24-Port Gigabit PoE Stackable Managed Switch 1 x MicroFiber Cloth 20 x Premade 6-Inch Cat6 Cables (Blue) 1 Year Extended Warranty
AddOn - Network Upgrades SFP (mini-GBIC) Module
AddOn - Network Upgrades SFP (mini-GBIC) Module - 1 x 4GBase-LW
Addon Fujitsu Fc9570a30e Compatible Taa Compliant 1000base-cwdm Sfp - FC9570A30E-AO
Addon fujitsu fc9570a30e compatible taa compliant 1000base-cwdm sfp transceiveraddon fujitsu fc9570a30e compatible taa compliant 1000base-cwdm sfp transceiver(smf, 1530nm, 80km, lc) Manufacturer : Add-on-computer Peripherals, L
Add-On Technology Co., Ltd.
3m (10ft) Dell Networking 470-AAWN Compatible 40G QSFP+ Passive Direct Attach Copper Cable
Product Details
Dell Genuine 470-AAWN
Vendor Name HE-LINK
Connector Type QSFP+ to QSFP+
Max Data Rate 40Gbps
Cable Type Passive Copper Cable
Wire AWG 30AWG
Cable Length 3m(9.84ft)
Jacket Material PVC(OFNR)
Temperature 0 to 70°C (32 to 158°F)
HTS-Harmonized Code 8544700000
Quality Certification
Quality and standards are the foundation of HE-LINK. We are dedicated to providing customers with outstanding, standards-compliant products and services. HE-LINK has passed many quality system verifications, like CE, RoHS, FCC, established an internationally standardized quality assurance system and strictly implemented standardized management and control in the course of design, development, production, installation and service.
Please Note: Installing a third party transceiver does not void your network equipment warranty. Network equipment manufacturers all have guidelines stating that warranty support on their products will not be affected.
Lifetime Warranty
All the fiber optic products in HE-LINK are fully warranted against defects in material and workmanship with a lifetime guarantee. This warranty does not cover damage caused by accident, improper care, improper use, negligence, normal wear and tear, or the natural breakdown of colors and materials over extended time and use.
Packaging & Labeling
This easy to handle and well-protected transceiver package has been labelled and marked to default HE-LINK standards. Customized label or package solutions are available on request.
OEM & Customs
Partnering with a variety of world class OEM manufacturers for over 8 years, HE-LINK is able to provide customized high-quality and cost-effective solutions for all needs and specifications, including optical design, mechanical design, Printed Circuit Board (PCB) layout and electrical design, software & firmware design, integrated assembly, specific labels, etc. With surging sales and favorable customer feedback, HE-LINK has been expanding rapidly across the world and is becoming the leading provider of the optical communication industry. If you are interested in our products, please feel free to contact us at sales@HE-LINK.COM .
Shipment
HE-LINK can ship via FedEx, DHL, UPS, TNT, EMS or a customer-arranged carrier. Items are often shipped the same day (some transceivers can be out the door in 20 minutes). If we have no stock in any of our global warehouses, the shipment will be delayed for 1-2 days. DHL will take 2-4 business days for delivery and FedEx only needs 1-3 business days. For Spain, Italy, Brazil and certain other countries, items will take longer to arrive due to the customs clearance period.
shenzhen he-link technology ltd.
AddOn NTTP02BF Comp 100Base-LX TAA Xcvr - NTTP02BF-AO
This Ciena NTTP02BF compatible SFP transceiver provides 100Base-LX throughput up to 2km over multi-mode fiber (MMF) at a wavelength of 1310nm using a LC connector. It is guaranteed to be 100% compatible with the equivalent Ciena transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. It is built to meet or exceed the specifications of Ciena, as well as to comply with MSA (Multi-Source Agreement) standards to ensure seamless network integration. All of our transceivers are Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty.
NETCNA CRS-XENPAK-10GB-LR (Cisco 100% Compatible Optical Transceiver)
Features Form Factor: XENPAK Device Type: Transceiver module Interface (Bus) Type: Plug-in module Connectivity Technology: Wired Application: 10GBASE-LR Data Transfer Rate: 10Gbps Wavelength: 1310nm Max Distance: 10km Fiber Type: SMF Connector: DuplexSC DDM: With DDM Operating Temperature: 0~70A C Compliant with MSA XENPAK Specification
