PowMr Solar Charge and Discharge Controller with Fan, Specification:HHJ-50A
Details:1. Weight: 1300 grams2. Dimensions: 215x115x50 mm3. Material: PSC, aluminum alloy4. Rated voltage: 12/24/36/48V5. Rated current: 30/40/50/60A6. Function: current, voltage, current working mode, charging power, temperature displayFeatures:1. Output overvoltage, undervoltage, temperature rise, input anti-inflow, reverse connection, temperature, short circuit protection, safe and reliable2. Used in lithium batteries and accumulators with a wide range3. High strength, high ignition point, impact resistance, aging resistance, corrosion resistance4. 10 wiring terminals, convenient for multiple machines in parallel5. LCD backlit liquid crystal display, full backlight to half backlight about 1 minute and 30 seconds, half backlight for 5 seconds6. The intelligent electric fan heats up, it turns on when it is above 45 degrees Celsius, and it turns off when it is below 40 degrees Celsius, to dissipate heat for the controller and save power7. PV and Battery positive and negative poles each have two terminals8. Out power is displayed, and the conversion rate of PV panels can be calculated9. The charging status displays the sun icon and the direction icon, and only the moon icon is displayed when not charging, which clearly shows the charging status, and the Battery icon shows the battery level, which is obvious10. The temperature is accurate to one decimal place11. The absorption stage of battery charging can be set to better protect the battery12. The main interface cannot be automatically jumped, which is convenient for real-time monitoring and observation when the entire system has problems
Shenzhen SUNSKY Technology Limited
Solar Controller SOLAR80 12V/24V 80A Solar Charge and Discharge Controller LCD Liquid Crystal Display
Details:1. Weight: 630 grams2. Size: 14.3x21.5x7.3 cm3. Material: ABS4. System voltage: 12/24V5. Current: 80A6. USB: output 5V/1A7. Working temperature: -10-60 degrees CelsiusFeatures:1. Wide applicability, safe and reliable2. Easy to connect3. Diverse functions, intelligent power off4. The material is healthy and environmentally friendly, wear-resistant and durable5. LCD full screen display parameters
Shenzhen SUNSKY Technology Limited
5.5V 1.5W 290mAh DIY Sun Power Battery Solar Panel Module Cell, Size: 135 x 88.5mm
1. Build your DIY-powered models / solar toys / solar displays. 2. High conversion rate. 3. High-efficiency output. 4. Excellent weak light effect. 5. Application: Science projects/Charging small DC batteries and so on. 6. Portable, small size, lightweight, sturdy and durable, good quality. 7. Power: 1.5W 8. Small attenuation, good reliability and long life.
Shenzhen SUNSKY Technology Limited
PowMr Solar Charge and Discharge Controller with Fan, Specification:HHJ-60A
Details:1. Weight: 1300 grams2. Dimensions: 215x115x50 mm3. Material: PSC, aluminum alloy4. Rated voltage: 12/24/36/48V5. Rated current: 30/40/50/60A6. Function: current, voltage, current working mode, charging power, temperature displayFeatures:1. Output overvoltage, undervoltage, temperature rise, input anti-inflow, reverse connection, temperature, short circuit protection, safe and reliable2. Used in lithium batteries and accumulators with a wide range3. High strength, high ignition point, impact resistance, aging resistance, corrosion resistance4. 10 wiring terminals, convenient for multiple machines in parallel5. LCD backlit liquid crystal display, full backlight to half backlight about 1 minute and 30 seconds, half backlight for 5 seconds6. The intelligent electric fan heats up, it turns on when it is above 45 degrees Celsius, and it turns off when it is below 40 degrees Celsius, to dissipate heat for the controller and save power7. PV and Battery positive and negative poles each have two terminals8. Out power is displayed, and the conversion rate of PV panels can be calculated9. The charging status displays the sun icon and the direction icon, and only the moon icon is displayed when not charging, which clearly shows the charging status, and the Battery icon shows the battery level, which is obvious10. The temperature is accurate to one decimal place11. The absorption stage of battery charging can be set to better protect the battery12. The main interface cannot be automatically jumped, which is convenient for real-time monitoring and observation when the entire system has problems
Shenzhen SUNSKY Technology Limited
GROTE 61261 Dome Lamp,Recessed Mount,LED,L 18-1/4 In
Dome Lamp, Length 18-1/4 In., Width 5-3/4 In., Depth 1 In., White/Clear, Shape Rectangle, Lamp Type LED, 12 Volt Bulb, Material Aluminum/Acrylic, Current Rating 1.75A, Termination Type Hardwired, Mounting Type Recessed, Includes Built-In Thermal Protection Device. This item has been restricted from sale in the following state(s): []
Male Connector,1/4-18,1/2 In Tube Sz EATON WEATHERHEAD 1468X8X4
Male Connector, Pipe Size 1/4 In, Tube Size 1/2 In, Thread Size 1/4-18 In, Pressure 150 PSI, Connection Compression Nylon Tube, Temp. Range -40 to 200 F, Material Brass, Standards SAE and DOT FMVSS 571/143, Includes Nut and Sleeve. This item has been restricted from sale in the following state(s): []
EATON WEATHERHEAD 1869X8S Swivel Male Elbow,3/8-18,1/2 In Tube Sz
Swivel Male Elbow, Pipe Size 3/8 In, Tube Size 1/2 In, Thread Size 3/8-18 In, Pressure 150 PSI, Connection Quick Connect, Temp. Range -40 to 200 F, Material Brass, Gasket Material Ethylene Propylene Rubber, For Use With Push Connect/Air Brake, Standards DOT FMVSS 571.106 and SAE J1190. This item has been restricted from sale in the following state(s): []
EATON WEATHERHEAD 1468X12 Male Connector, 1/2-14, 3/4 In Tube Sz
Male Connector, Pipe Size 1/2 In, Tube Size 3/4 In, Thread Size 1/2-14 In, Pressure 150 PSI, Connection Compression Nylon Tube, Temp. Range -40 to 200 F, Material Brass, Standards SAE and DOT FMVSS 571/132, Includes Nut and Sleeve. This item has been restricted from sale in the following state (s): []
EATON WEATHERHEAD 1464X6 Union Tee,3/8 In Tube Sz
Union Tee, Tube Size 3/8 In, Pressure 150 PSI, Connection Compression Nylon Tube, Temp. Range -40 to 200 F, Material Brass, Standards SAE and DOT FMVSS 571/122, Includes Nut and Sleeve. This item has been restricted from sale in the following state(s): []
Male Connector,1/8-27,1/4 In Tube Sz EATON WEATHERHEAD 1468X4
Male Connector, Pipe Size 1/8 In, Tube Size 1/4 In, Thread Size 1/8-27 In, Pressure 150 PSI, Connection Compression Nylon Tube, Temp. Range -40 to 200 F, Material Brass, Standards SAE and DOT FMVSS 571/134, Includes Nut and Sleeve. This item has been restricted from sale in the following state (s): []
0.65W 1.5V Polycrystalline Silicon Solar Panel Solar Cell for DIY Power Charger 60*80mm
When we are travelling or camping in the outdoors, running out of battery is a very annoying thing. But if you have this DIY Solar Panel, you completely don; t have to worry about that. Features: Solar cell specification: 0.65W / 1.5V. The solar cell can be used for DIY charger. It can multiple series or parallel to produce electricity. Portable size, easy and more convenient to use. Specifications: Color: Black Material: Polycrystalline Silicon Working Voltage: 1.5V Max. Power: 0.65W Working Current: 0-300mA Open-circuit Voltage: 2V Cable Length: Approx. 14cm Product Size: 60 * 80 * 3mm Product Weight: 17g / 0.62 oz Package Size: 12.5 * 11 * 0.5 cm Package Weight: 23g / 0.81 oz Package List: 1 * Solar Panel
280675 Flat Idler
280-675 flat idler for Husqvarna 532123674 height: 7/8" id: 3/8" OD: 3 9/16" material: metal made by: an OEM supplier includes a 3/8" reducer bushing
2pcs Animal Repeller Pest Repeller with LED Night Light Solar Powered Repellent for Garden Outdoor Lawn
Description: This repellers are used in garden or farm to repel rodent and s nake. They send out sonic w ave to frighten animals within 650?. Using them, you don39; t have to worry about pollution or food poisoning like what chemical method might cause. As the repellers are solar powered, there is no wiring needed. Just stick them into ground and you have your field protected. Product Parameters: Main Repelling Animal: S nake, MiceMaterial: ABS Plastic + Aluminium pipeBattery: 1.2V 600AhSound W ave Frequency: 400Hz-1000HzWorking Distance: Within 650 Square MetersWaterproof Level: IP44Applications: This product can be used in gardens, lawns, orchards, vegetable gardens and other places. Size: 23.5 * 10.5 cm (H*D) How it works? Solar powered repellent has been developedas a deterrent for many kinds ofanimals. It emits a pulsing buzzing into the surrounding soil. S nakes and some animals hardly hear airborne sounds but are sensitive to vibration. Most animals choose to avoid dange. Features: 1. Changing vibration pattern helps deter animals that en counter the repellent again. The repellent vibrates at various time intervals in cycle(5s, 30s, 40s, 50s, 60s, 120s), each vibration lasts about 4 to 10 seconds. 2. Built-in garden LED lights LED lights turnn automatically at dusk and when the solar panel is not being charged. They light up in 2 patterns: constant on steady (30mins) and flashing (30mins, flash once per minute). Product Assembly: 1. The solar head and the vibration tube are shipped to you unassembled. 2. Look into the open end of the Vibration Tubed notice the cable. The cable end has a plug. Gently pull out the cable to access the plug. 3. Insert the plug from the Vibration Tube intoSolar Head. The repellent emits vibration immediately and starts to work. 4. Push the Solar Head onto the Vibration Tube. 5. Place the assembled Solan Repellent outside where it will receive sunlight or bright daylight on the solar panel for at least 4 to 5 hours a day. Allow one day for the internal battery to charge for the first use. Installation Guide: 1. Place vibration tube 10-15 cm deep. Never force or hammer the device into the around. 2. Backfill with soil finely crumbled. Soak soil with water to set. 3. Place repellent no more than 25m apart. In sandy or rock y soil reduce to 10m. 4. Poor soil contact will cause a weak vibration and noisy operation. Avoid air gaps. 5. Vibration doesn39; t pass through buildings and hard substances like rocks amp; concrete. 6. Vibration doesn39; t jump deep cracks. Add extra repellents and avoid limiting your areacoverage. Packing Included: 1 x Solar Energy Repeller
12V 9.2W Solar Panel Powered Kit System Semi-flexible Portable Polysilicon Solar Panels
Description: This product is specially designed for outdoor 12V applications, such as car, hip, motor and other motor rechargeable batteries, and maintain sufficient capacity to protect battery power supply. Features: 1. Good quality2. Portable and light3. Long service life4. Easy to use5. Semi-flexible Specification: 1. Material: grade A polysilicon solar panels2. Power: 9.2W 3. Operating voltage: 12V Current: 0-583MA4. Voltage: 5V Current: 0-1000MA (Stabilized) 5. Working temperature: 0~60?6. Size: 411*200mm7. Weight: 508g Package included: 1x Solar panel1x Alligator clip1x USB car charger1x Cigarette lighter
Waterproof 9000000mAh 2 USB Portable Solar Battery Charger Solar Power Bank KB
Restocking Fee: No Return shipping will be paid by: Seller All returns accepted: Returns Accepted Item must be returned within: 30 Days Refund will be given as: Money back or replacement buyer's choice Number of Ports: 2 Country/Region of Manufacture: China Compble Brand: Universal Connectivity: USB Type: Solar Power Charger Compble Model: For iPhone 7 Color: Black + Blue MPN: 156416556 Model: HU Power Capacity: 9000000mAh Brand: Bundle Listing: Yes
10/25W 23/36 LED Solar Flood Light Waterproof Security Wall Street Lamp For Outdoor Garden Courtyard with Remote Controller
Introductions: Floodlight features even and emissive light rays, which has been widely applied in many fields. Would you like to buy a flood light for your own? Here comes our 10W 25LED /25W 36LED White Light IP66 Waterproof LED Solar Floodlight. Aluminum alloy casing endows the light with solid structure and stable performance, durable for long-term use. Powered by solar energy, this flood light is quite user-friendly and environmentally friendly. And it is also an energy-saving product. Take one back home for lighting as well as for decorating. Specification: 10W Solar Flood Light25W Solar Flood LightPower10W25WSolar Panel6V/3W6V/6WLighting Time12h12hIrradiation Area50-60 sq. ft50-80 sq. ftLight ColorCool WhiteCool WhiteWaterproof GradeIP66IP66LED Source23LED36LEDBattery1000mAh1500mAhFloodlight Size130*125mm115*145mmSolar Panel Size220*135mm220*135mmMaterialCast Aluminium+PPCast Aluminium+PP Feature: 1. Die casting aluminum radiator strong convection design solve heat dissipation problems better safeguard the light life 2. No pollution, no infrared and thermal radiation 3. Solar panel energy saving, single-crystal energy-efficient solar panels. Conversion rates up to 18% 4. Easy to install, widely mount on wall, fence, tree, step etc. to lighting up your garden, hallway, pillar, desk, yard, patio, or driveway and other places 5. Applicable to various fields, such as photo-studio, shopping mall or street etc. 6. Powered by solar energy, it is rather environmentally friendly 7. Lamp pole installation or wall installation two mounting methods 8. Easy to install and remove. 9. Durable, energy-saving and long services. 10. It can be used as wall light, street light, lawn light, etc. Package included: 1x 10W/25W Solar Flood Light 1x Remote Controller
10A 12V Intelligent PWM Solar Panel Charge Controller Auto Battery Regulator
Description: 10A 12V Intelligent PWM Solar Panel Charge Controller Auto Battery Regulator Features: Intelligent control is realized by using microprocessor and dedicated control calculation. Five load working modes: pure lighting control, lighting control amp; timing control, hand operation and debug mode. Scientific management of battery: as it is overcharged, the battery will get booster tension charge. As a result compulsory maintenance is available for the battery. In normal working state, the direct charge and floating charge are both available, so that the battery life-span is increased. Besides, the adoption of high precision temperature compensation makes the charging more accurate. Comparing with the charging loops using diodes, the one that adopts double MOS series circuit control makes the voltage loss dropped by 50%. With the PWM fuzzy control in charging, the charge efficiency is improved a lot. LED screen shows the working state of solar battery, storage battery and load. LED shows the adjusted parameter. In this way, users can learn the operation state in real time. Besides, there are various choices for parameter; users can select the proper working mode based on the different conditions. Various protections include over-charge, over-discharge and over-load, as well as unique electron short circuit protection and connection-reverse protection. All the protections are harmless to any parts and fuse; fuse only as the end protection of a controller itself to protect the amount of internal short circuit damage. None wore jumpers design improves the reliability and durability of the products. Industrial-grade chips and precision components are adopted for all the controls. Therefore, the controller performs well in very low and high temperature, as well as humid environment. At the same time, with the use of crystal timing control, the timing function of controller is much more reliable. Using large-diameter wire terminal, can fix the wire which max size is 6mm. Parameter is set to power-down save function, the system model and control parameters, and other important data are stored inside the chip, after power is not lost, to make the adjustment more convenient, more reliable system. Using 2 digital LEDs display and settings, one-button operation to complete all of the settings, intuitive and easy to use. Nice PCB with excellent material and design! Specification: Battery voltage: 12V Charge current: 10A Discharge current: 10A Float charge: 13.8V Charge reconnect: 13.0V Discharge stop: 11.2V Discharge reconnect: 12.6V Self-consume: lt; 10mA USB output: 5V / 3A Direct charging voltage: 14.5 V Working temperature: industry stage: -35?~+60? Size: 13.3 x 7.0 x 3.5 cm Package includeds: 1 x PWM Solar Charge Controller 1 x User manual Details pictures:
Male Connector,1/4-18,3/8 In Tube Sz EATON WEATHERHEAD 1868X6
Male Connector, Pipe Size 1/4 In, Tube Size 3/8 In, Thread Size 1/4-18 In, Pressure 150 PSI, Connection Quick Connect, Temp. Range -40 to 200 F, Material Brass, Gasket Material Ethylene Propylene Rubber, For Use With Push Connect/Air Brake, Standards DOT FMVSS 571.106 and SAE J1160. This item has been restricted from sale in the following state(s): []
EATON WEATHERHEAD 1868X8 Male Connector,3/8-18,1/2 In Tube Sz
Male Connector, Pipe Size 3/8 In, Tube Size 1/2 In, Thread Size 3/8-18 In, Pressure 150 PSI, Connection Quick Connect, Temp. Range -40 to 200 F, Material Brass, Gasket Material Ethylene Propylene Rubber, For Use With Push Connect/Air Brake, Standards DOT FMVSS 571.106 and SAE J1164. This item has been restricted from sale in the following state(s): []
EATON WEATHERHEAD 1462X8 Union,1/2 In Tube Sz
Union, Tube Size 1/2 In, Pressure 150 PSI, Connection Compression Nylon Tube, Temp. Range -40 to 200 F, Material Brass, Standards SAE and DOT FMVSS 571/120, Includes Nut and Sleeve. This item has been restricted from sale in the following state(s): []
EATON WEATHERHEAD 1874X6X6 Bulkhead Union,3/8 In Tube Sz
Brass air brake connectors and accessories are available in various sizes to meet your needs. Here is some additional information about Eaton Weatherhead Bulkhead Union. Material: Brass, Tube Size: 3/8", For Use With: Push Connect/Air Brake.. This item has been restricted from sale in the following state(s): []
