3.5" LCD CCTV Tester for IP & Analog camera testing with function of PTZ, UTP Cable Test, POE Test, Digital Multimeter and cable scan

Features: 1. 3.5 inch full-view TFT-LCD, 480 (RGB) x 320
3. Low consumption, work for 11 hours 3. OSD menu, English/Chinese and other languages optional 4. LCD screen brightness/contrast/color Saturation adjustable
5. Automatically identify and adapt the video mode of NTSC and PAL
Enhanced color-bar generator, by receiving the video color bar to test the video channel whether transmit normally
6. Movable Micro SD 7. LED Lamp, easy to operate at night
9. User-defined shortcut keys (F1 and F2) 10. 10x zoom, video image can be magnified to view the details, easy to use
11. Snapshot and save the current image as JPG file in the SD card
Detail Function:
1. Video signal testing
2. Video signal level test 3. PTZ controller
4. Enhanced Color bar generator 5. DC12V 1A output power
6. Audio testing
7. Cable tester 8. PTZ controller 9. PTZ address scanning
10. Image magnification (10xZoom)
11. Video snapshot
12. Video record
13. Video playback
14. Port flicker 15. IP address scan
16. Link monitor 17. PING test 18. POE tester 19. LED lamp 20. F1, F2 User-defined shortcut keys
21. Cable scan
22.
Digital multimeter Signal mode: NTSC/PAL (Auto adapt)
Display: 3.5 inch digital TFT-LCD, 480 (RGB) x 320 resolution
LCD adjustment: Brightness, Contrast, Saturation adjustable
Video IN/OUT: 1 channel BNC Input & 1 channel
Output Video Output Mode: 1.0 Vp-p
Level test: Video signals measured in IRE or mV
Communication: Support RS232 and
RS485 PTZ Protocol: Compatible with more than 30 protocols such as PELCO-D/P, Samsung, Panasonic, Lilin, Yaan, etc.
Baud Rate: 600, 1200, 2400, 4800, 9600, 19200, 57600, 115200bps
Color bar generator: Output one channel PAL/NTSC color bar video signal for testing monitor or video cable. (red, green, blue, white and black color)
UTP cable test: Test UTP cable connection status and display in the screen. Read the number of the test box.
DC12V power output: Output DC12V1A power for camera
Audio input test: Test the pickup and other audio equipments on the front-end
Data Monitor: Captures and analyzes the command data from controlling device
Image 10x zoom: 10x zoom image display and video out
Photograph: snapshot and save the current image as JPG file
Video record: Video record and storage the file
Record playback: To view the storage file in the SD card
Port flicker: Find the connected POE port quickly.
IP scan: Find out the connected IP camera or the other network equipment IP address quickly.
Link monitor: Check the IP address whether is occupied
PING testing: Test IP camera or Ethernet port of the other network equipment whether work normally, and check the IP address
Cable scan: Search the cable by the audio signal
POE tester: Display the power supply voltage and cable connection states
Digital Multimeter: AC/DC Voltage 0-660V auto/manual range, the min resolution is 0.1 mV
AC/DC current: 660.0 uA, 6.600 mA, 66.00 mA, 660.0 mA, 10.00A
Resistance: 660.0?, 6.600 k?, 66.00 k?, 660.0 k?, 6.600M?, 66.00M?
Capacitance: 6.6 nf ~ 66000uF, the min resolution is 1pf
Diode: 0 ~ 2V forward voltage, the min resolution is 1mV
Data hold: Hold the measurement optical power value
Relative measurement: display the difference value of the first testing result
Continuity testing: Built-in buzzer will sound, if resistance is lower than 50?
Testing speed: 3 times/ seconds
Data range: -6600~+6600
Power Adapter: DC 5V ( 1.5A )
Battery: Built-in 3.7V Lithium polymer battery, 3000mAh
Rechargeable: After charging 3-4 hour, working time lasts 11 hours
Low Consumption: Energy saving technology, the battery icon real-time display
Operation setting: English/Chinese and other languages OSD menu
Auto off: 5-60 (mins)
Key tone: On/Off
Working Temperature: -10---+50
Working Humidity: 30%-90%