Gigabit Fiber to G Copper UTP Ethernet Media Converter - Open SFP+ Gb Slot - G Base-T to G Base-R - Cat7 UTP 1m Cable in Set - Gbps Gbit Fiber Optic Converter

Looking to expand the distance of your G Base-T copper network RJ-45 port over 50 m (164 ft) to 2, 5 or more kilometers away? Now, the only thing you need to do is to choose your own SFP+ type G fiber transceiver module for cable type (Single or Multimode) and distance required, plug it in to our G Open SFP+ slot media converter, and you are good to go! All These Important Features Are All Supported: 00Base-T, 2.5GB ase-T, 5GBase-T, GBase-T, 00Base-X, 2500Base-Z, 5GBase-R, GBase-R Distance & Fiber Type Depends on the SFP/SFP+ transceiver you choose;
Power supply: 0 to 240VAC 50 to 60Hz, US plug
Dimensions: 70.5 mm / 2.77 in (L) X 94mm / 3.7 in (W) X 26.5 mm / 1.04 in (H)
Relative humidity: 5% to 90%
Operating temperature: 0 to 70 degree celsius Supports Jumbo Ethernet frames up to 9000 bytes Supports LLF feature - Link Loss Feature The Unit will work as a converter as well as a distance extender for your G network connections, whatever application it is. UTP RJ-45 port is autosensing, so you can connect it also to 1G, 2.5G and 5G speeds. However, it is important to remember that, in this case fiber uplink SFP+ speed and transceiver type must be the same if you plan to connect UTP port to 1G (00M) ports, use 1.25 (Gigabit type) in SFP slot as well. This converter will support both speed of transceiver speeds, but speeds must match at the fiber and UTP side! Since we made the SFP+ / SFP slot universal, this is your pay-as-you grow solution, even if you dont need the G connection in your datacenter right now use it with 1.25 (Gigabit) transceivers NOW, and later upgrade to the G SFP+ transceiver. Questions during installation? Questions during considering a purchase? We are always here to answer You and guide You through!