Brand |
Kramer Electronics |
Model |
TP-581T |
The is a high-quality twisted pair transmitter for HDMI, Ethernet 100BaseT, bidirectional RS-232 and IR signals. The takes the HDMI input, and converts it with the Ethernet 100BaseT, RS-232 and IR input signals to a twisted pair signal. The TP-582R converts the twisted pair signal back to Ethernet 100BaseT, RS-232, IR and two HDMI outputs, and de-embeds the audio to S/PDIF and TOSLINK audio outputs. Features:Max. Data Rate - . HDBaseT Technology. HDTV Compatible. HDCP Compliance. HDMI Support - HDMI (V.1.4 with Deep Color, x. , Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS-HD, CEC). 3D Pass-Through. EDID PassThru - Passes EDID signals between the source and display. Bidirectional RS-232 Interface - Commands and data can flow in both directions via the RS-232 interface, allowing status requests and control of the destination unit. Ethernet Interface - Passes 100BaseT. System Range - Up to 100m (330ft). Cable - Requires shielded twisted pair (STP) cable. For optimum range and performance use, use 's BC-DGKat524, BC-DGKat623 and BC-DGKat7a23 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non- CAT 5, CAT 6, and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground. Control - Front panel. Indicators - Status LEDs for input selection, output, link and power. Compact MegaTOOLS - 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-T2B universal rack adapter. Specifications:INPUTS: 1 HDMI connector, 1 IR on a mini jack, 1 Ethernet 100BaseT on an RJ-45 connector, 1 RS-232 on a 9-pin D-sub connector. OUTPUTS: 1 RJ-45 connector. BANDWIDTH: Supports up to bandwidth per graphic channel. COMPLIANCE WITH HDMI STANDARD: Supports HDMI and HDCP. POWER SOURCE: 5V DC, 800mA. DIMENSIONS: x x (7.4 x 4.5 x 1.0) W, D, H. WEIGHT: ( ). ACCESSORIES: Power supply. OPTIONS: RK-T2B 19 rack mount.