*Product availability is subject to suppliers inventory
Brand | PLANET |
---|---|
Model | GS-4210-16P2S |
Standards | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX / 100BASE-FX IEEE 802.3z Gigabit SX / LX IEEE 802.3ab Gigabit 1000BASE-T IEEE 802.3x Flow Control and Back pressure IEEE 802.3ad Port Trunk with LACP IEEE 802.1D Spanning Tree protocol IEEE 802.1w Rapid Spanning Tree protocol IEEE 802.1s Multiple Spanning Tree protocol IEEE 802.1p Class of Service IEEE 802.1Q VLAN Tagging IEEE 802.1x Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP version 1 RFC 2236 IGMP version 2 RFC 3376 IGMP version 3 |
Network Management Type | Managed |
Primary Ports | 16 x 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3at PoE+ Injector 2 x 100/1000BASE-X mini-GBIC/SFP slots 1 x RJ45 console interface for switch basic management and setup |
MAC Address Table | 8K |
Switching Method | Store and Forward |
VLAN Support | Yes |
Jumbo Frames | 9KB |
Security | IEEE 802.1X Port-based authentication Built-in RADIUS client to cooperate with RADIUS server RADIUS / TACACS+ user access authentication MAC filter Static MAC address DHCP Snooping and DHCP Option82 STP BPDU Guard, BPDU Filtering and BPDU Forwarding |
PoE | Yes |
SNMP | Yes |
QoS | Yes |
LACP | Yes |
Port Mirroring | Yes |
LEDs | System: Power (Green) 10/100/1000T RJ45 Interfaces (Port 1 to Port 16): 1000 LNK / ACT (Green), 10/100 LNK / ACT (Orange), PoE (Orange) 100/1000 Mbps SFP Interfaces (Port 17 to Port 18): 1000 LNK / ACT (Green), 100 LNK / ACT (Orange) |
Power | Power Requirements: 100~240V AC, 50/60 Hz, 4A (max.) Power Consumption / Dissipation: Max. 281 watts / 964 BTU |
Features | Physical Port: 16 x 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3at PoE+ Injector 2 x 100/1000BASE-X mini-GBIC/SFP slots 1 x RJ45 console interface for switch basic management and setup Power over Ethernet: Complies with IEEE 802.3at Power over Ethernet Plus / end-span PSE Up to 16 ports of IEEE 802.3af / 802.3at devices powered Supports PoE Power up to 30.8 watts for each PoE port Auto detects powered device (PD) Circuit protection prevents power interference between ports Remote power feeding up to 100m PoE Management - Total PoE power budget control - Per port PoE function enable / disable - PoE port power feeding priority - Per PoE port power limitation - PD classification detection Intelligent PoE features - PoE usage threshold control - PD alive check - PoE schedule Layer 2 Features: Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) High performance Store and Forward architecture, runt / CRC filtering eliminates erroneous packets to optimize the network bandwidth Supports VLAN - IEEE 802.1Q tagged VLAN, up to 256 VLAN groups, out of 4094 VLAN IDs - Protocol VLAN Supports Spanning Tree Protocol - IEEE 802.1D Spanning Tree Protocol (STP) - IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) - IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN - BPDU Guard Supports Link Aggregation - IEEE 802.3ad Link Aggregation Control Protocol (LACP) - Cisco ether-channel (static trunk) Provides port mirror (many-to-1) Quality of Service Ingress / Egress Rate Limit per port bandwidth control Storm Control support - Broadcast, Unknown Unicast, and Unknown Multicast Traffic classification - IEEE 802.1p CoS - DSCP / IP Precedence of IPv4 / IPv6 packets Strict priority and Weighted Round Robin (WRR) CoS policies |
Dimensions | 1.77" x 17.52" x 8.15" |
Weight | 6.17 lbs. |
Temperature | Operating Temperature: 0 ~ 50 degree Celsius Storage Temperature: -10 ~ 70 degree Celsius |
Humidity | 5% - 95%, Non-condensing |