Focusrite Clarett 4Pre USB Audio Interface
18 in / 8 out USB audio interface with four award-winning Clarett mic preamps with "Air", class-leading AD/DA conversion and super-low latency. Forward compatible with USB-C. The Clarett USB range features specially designed high performance, low-noise (-128dB EIN) mic pres with a low distortion, ultra-linear design that guarantees a clean, open and transparent sound, giving accurate representation of the original performance. Boasting 118dB dynamic range, Clarett can now be experienced with any Mac or PC supporting USB 2.0 and above. Decades of analog circuit design experience, applied around 24-bit/192kHz A-D and D-A conversion, delivers a superior signal path. Clarett 4Pre USB is an 18-in, 8-out audio interface. Gain Halo meters make it easy for you to set the input level of the four mic/line inputs, two of which are also high-impedance instrument inputs that can record super-hot pickups with no unwanted distortion. Four fixed line inputs are also included, and the ADAT input supports an additional eight channels when combined with multi-channel mic preamps like Clarett OctoPre. Outs include two monitor outputs with anti-thump technology, two line outputs and two headphone outputs with volume controls. MIDI I/O and S/PDIF I/O are also included. The four Air-enabled mic preamps can reproduce the input impedance, clarity and frequency response curve of Focusrite & #39; s original ISA mic preamp. Clarett 4Pre USB connects to Mac or PC using the included standard USB and USB Type-C cables. Record with super-low latency through amp simulators and effects plug-ins. Configure your routing and monitor mixes from Mac, PC, iPad, iPhone or iPod touch with user-friendly control software Focusrite Control. Additional included software is from XLN Audio, Focusrite, Softube, Ableton and Loopmasters. Features: Ultra-low noise (-128dB EIN) Clarett mic preamps, ultra-low distortion and 118dB dynamic rangeIncluded standard USB and USB Type-C cables connect to Mac or PCPrecision 24-bit/192kHz A-D and D-A conversion for the ideal signal pathHigh-headroom instrument inputs for recording super-hot pickups with no unwanted distortionFour Air-enabled mic preamps, which can reproduce the sound of Focusrite & #39; s original ISA mic preampSupports any Mac or PC with USB 2.0 and aboveConnects to Mac or PC using the included standard USB and USB Type-C cablesTwo mic/line/instrument inputs plus Two mic/line inputsGain Halo meters make it easy for you to set the input levelFour additional fixed line inputs on the rear panelGet your Focusrite Clarett 4Pre USB Audio Interface today at the guaranteed lowest price from Sam Ash Direct with our 45-day return and 60-day price protection policy.
M Audio Uno 1-In/1-Out USB Bus-Powered MIDI Interface
M Audio Uno 1-In/1-Out USB Bus-Powered MIDI Interface
Primacoustic KickStand Kick Drum Mic Isolator
The KickStand is a heavy microphone boom-arm isolator that combines a massive stabilizing base with an isolation pad to eliminate resonance from the stage, drum riser and studio floor from entering the microphone. A common problem with bass guitar and kick drum is resonance on a live stage. This is generally caused by low frequencies coupling with the wood flooring which will combine with the instrument at certain frequencies and generate unwanted peaks and valleys. Another problem is the physical vibration from the kick drum pedal and low-end from the PA system that causes the drums to rattle and transmit through the drum riser. Microphones that are near these sources are prone to picking up these unwanted sounds. The KickStand helps eliminate the problem by decoupling the microphone stand from the stage while introducing a stabilizing mass to hold the microphone firmly in place. & bull; & nbsp; & nbsp; & bull; & nbsp; & nbsp; Combination boom-stand base and vibration isolator & bull; & nbsp; & nbsp; Eliminates disruptive resonance from the microphone stand & bull; & nbsp; & nbsp; Improves transient response of the microphone & bull; & nbsp; & nbsp; Makes getting the sound you want fast and mixing easier??WARNING: Cancer and Reproductive Harm - www. P65Warnings. ca. gov
Radial Workhorse Powerhouse - 10 Slot 500 Series Power Module
The design begins with heavy 14 gauge steel construction and baked enamel finish for maximum shielding against noise and greater durability when subjected to road use. An & #39; easy glide & #39; slider tray makes it painless to align the PCB connector to the 15 pin card edge receptacle when swapping modules. Once connected, the rear panel sports a standard array of XLRs to connect to and from the workstation or mixer. This is augmented with a series of ?" TRS connectors that enable cross-patching and open the door to the excitement of parallel signal processing. Instead of having to hard patch modules together using a cable, the Powerhouse incorporates an innovative feed switch that instantly connects the signal to the adjacent module. This makes building signal chains quick and eliminates the need for extra cables. And unlike older racks that require soldering when modules are used in stereo, the Powerhouse is equipped with a stereo link function that takes care of the task with a simple slide of a switch. Unlike older racks that are limited to an average of 130 milliamps per slot, the Powerhouse boasts a 1600 milliamp power supply that lets you share the power as needed. This means it can deliver 300 milliamps to your two tube preamps and still have over 1000 milliamps left in the pool! And just like all Workhorse racks, the Powerhouse is equipped with extra safety features to ensure safe use when mixing and matching various brands. The Powerhouse delivers more flexibility than all others. Features: 10-slot design for maximum densityIndividual XLR & ?" TRS i/o on each slotEasy-Glide module alignment trayInnovative feed and link functionsGet your Radial 500 Series modules and racks right here at Sam Ash Direct! With our many decades of experience and efficient order processing, your satisfaction is guaranteed! WARNING: Cancer and Reproductive Harm - www. P65Warnings. ca. gov
Radial 8ox Rackmount 8 Channel Microphone Splitter
The Radial 8ox is a high-performance 8-channel 3-way mic splitter that is equipped with an input and three outputs: a direct feed for 48V phantom return, an auxiliary feed with ground lift switch and a transformer isolated output. Although primarily designed for mic signals, the 8ox is equipped with a -36dB pad for line level sources, making the 8ox highly adaptable for all types of signal splitting. The 8ox is particularly well suited to accommodate live recording by delivering a transformer isolated audio signal path for the recording engineer while providing a direct feed to the front of house and monitor consoles. For maximum flexibility, several connector options are available. Inputs may be accessed via the front panel, using standard XLRs, or the rear panel, with a choice of either 25 pin D-subs (wired to the Tascam standard) or Euro screw-down terminal connectors. Outputs include D-subs and Euro connectors, which are also located on the rear panel. These make it easy to connect to popular multi-track recording systems while providing easy termination for permanent installations. Because it is 100% passive, the 8ox does not require any power to make it work. Maximum durability is ensured with heavy duty 14 gauge steel construction throughout. A frame-mount version of the 8ox, the 8ci, provides an excellent option for installation inside standard NEMA electrical enclosures. The Radial 8ox comes standard with custom wound transformers or may be special ordered with Jensen Transformers. & bull; & nbsp; & nbsp; Compact 8-channel multi-purpose mic splitter & bull; & nbsp; & nbsp; Rear panel D-sub and Euro (Phoenix) screw terminals & bull; & nbsp; & nbsp; Ideal for live recording and signal distribution & bull; & nbsp; & nbsp; Choice of custom Radial or Jensen transformers & bull; & nbsp; & nbsp; Choice of 19" rack (8ox) or frame mounted (8ci) designs??WARNING: Cancer and Reproductive Harm - www. P65Warnings. ca. gov
RME QuadMic II 4-Channel Microphone Preamp
The QuadMic II from RME is a professional four channel analog microphone preamp that is designed to deliver pristine and clear signal quality for demanding studio recordings. The unit features low power operation and can be run using the included switching power supply, or by batteries by using the optional battery pack cable. This makes it suitable for field and studio use alike. Each of the four channels are equipped with balanced XLR/TRS combo mic/line inputs with switchable 48V phantom power, phase flip and a low cut filter at 80 Hz, 18 dB per octave. Each channel features LED indicators for signal presence, clip, and phantom power and a gain knob that can be set from +6 dB to +60 dB. There are also four 1/4" TRS line level outputs located in the back of the unit. Box Contains RME QuadMic II 4-Channel Microphone Preamp 6-Month Warranty
On-Stage WSR7025 Rack Screws, 25 Pack
Available in black, the On-Stage WSR7025 screws feature a pan with Phillips head type. Designed to fit On-Stage’s WSR7500 rack cabinet, these two universal screws will fit any and all racks. 6mm phillips head rack screwsConvenient 25 screw packOn-Stage Item No. 14079, WSR7025Get yours today; with the security of our many decades of experience and Sam Ash Direct efficient order processing, your satisfaction is guaranteed!
2Pcs Flight Case Knobs Shell-free Handles Flight Case Accessories for Outdoor Storage Case
Description
Are you looking for a creative and practical handle for your flight case installation? Our production can meet all your requirements with durable and reliable iron material for long serving time. It is designed with folding style and stable structure for firmly holding your case and labor-saving efficiently.
Features
- Color: Silver.
- Material: Iron.
- Size: 14.00X8.00X4.30cm/5.50X3.14X1.69inch.
- Made of premium and safe iron, higher hardness, non-deformable, anti-rust
- Safe and environmentally friendly. Solid design, abrasion resistant, strong load-bearing.
- Attractive and practical with a creative and universal appearance design.
- Recessed spring loaded handle and keep the handles out of the way when not in use.
- Thicken padded grip which is folding flexibly, comfortable to hold for labor saving.2 x Flight Case Handles
2Pcs Flight Case Accessories Flight Case Handles for Mounting Storage Case Tool Case
DescriptionAre you looking for a creative and practical handle for your flight case installation? Our production can meet all your requirements with durable and reliable iron material for long serving time. It is designed with folding style and stable structure for firmly holding your case and labor-saving efficiently.Features- Color: Silver.- Material: Iron.- Size: 14.00X8.00X4.30cm/5.50X3.14X1.69inch.- Made of premium and safe iron, higher hardness, non-deformable, anti-rust- Safe and environmentally friendly. Solid design, abrasion resistant, strong load-bearing.- Attractive and practical with a creative and universal appearance design.- Recessed spring loaded handle and keep the handles out of the way when not in use.- Thicken padded grip which is folding flexibly, comfortable to hold for labor saving.2 x Flight Case Handles
K&M 16090 Headphone Holder, Clamp-On for Flat Surfaces
This protective and stable holder is covered in soft rubber and is suitable for 2 standard pair of headphones. In addition, there are grooves on the front of the support arm in which two in-ear-headphones can be hung. The clamp can be extended from 0 to 1.772" allowing it to be mounted on a wide variety of tables, shelves etc. Clamps onto table and shelves up to 1.775" Flexible rubber support holds two set of headphones or earbuds Easy clamping thumb screw Non-marring protective surface K & M Item No. 16090.000. 56From the studio to the stage, Sam Ash Music has you covered with the latest gear and accessories. With our many decades of experience and efficient order processing, your satisfaction is guaranteed!
Auralex EZ-Stick Pro Mounting Tabs
The EZ-Stick Pro Tabs from Auralex form an instant permanent bond and require no tools for application. It’s quick, clean and easy peel and stick application is suitable for both ceiling and wall installations. EZ-Stick Pro Tabs work with all Auralex Foam products. • Instant permanent bond• Clean & quick installation• Ceiling & wall installations• Easy peal & stick application• No additional application tools requiredGet yours today; with the security of our many decades of experience and Sam Ash Direct efficient order processing, your satisfaction is guaranteed! EZ-Stick Pro Tabs may not adhere well to some vinyl wallpapers. Apply to surfaces above 50° F (10° C). Adhesive could soften and lose adhesion above 105° F (40° C). EZ-Stick Pro Tabs are considered permanent and will damage the wall surface when removed.
On-Stage TCM9163M iPad Snap-On Cover with Table Clamp, Mauve
It handles surfaces from 12mm (1/2”) to 52mm (2”) thick. The TCM9163 is constructed from a combination of aluminum and soft velveteen plastic. There are precise cutouts for all of the tablet’s controls, cameras, and ports. A 360° Ball Joint provides rotation and tilt adjustment, while a Pull Back Release sleeve makes removing the cover from the mounting bar a breeze. There’s even a Prop-Up insert included which converts the quick release into a slip-free tabletop monopod. Hands-Free or Hands-OnThe quick release design means versatility. Need to walk the room to hear what the mix sounds like off stage, or you want to capture some action on video? Simply release the cover from the clamp post and be on your way. When you’re done walking around, simply click the cover back into the clamp post and you’re hands-free again. It’s perfect for audio engineers, grade school teachers, AV presenters, and everyone in between. The u-mount adds a degree of protection and enhanced grip to your iPad®. The Snap-On™ back cover is a tough combination of aluminum and high-strength velvet-textured plastic. Precision cut-outs provide access to all the tablet’s buttons and keep the microphone, cameras, speaker, headphone jack, and data/charging port 100% functional. Features• & nbsp; Quick Disconnect version of the patent-pending u-mount system• & nbsp; Pull Back Release Sleeve for instant removal from mounting bar• & nbsp; Wider clamp mounts your tablet to table edges, counters, and other flat surfaces• & nbsp; u-mount versatility with the ease and convenience of a Snap-On cover• & nbsp; Velveteen inner lining provides grip and cushioning• & nbsp; Threaded aluminum boss allows for a variety of optional mounting devices• & nbsp; Cutouts for all of the tablet’s controls, cameras, and ports• & nbsp; Steel ball joint provides 360° rotation, allowing 30° of tilt at any angle, plus three 90° slots for precise slip-free positioning• & nbsp; Mounting Clamp handles surfaces 12mm (1/2”) to 52mm (2”) thick• & nbsp; Fits iPad® 2, 3 & 4 (Models A1395, A1396, A1397, A1403, A1416, A1430, A1458, A1459, A1460)Get the latest iOS and Tablet accessories right here at Sam Ash Direct! With our many decades of experience and efficient order processing, your satisfaction is guaranteed!
Focusrite ISA 428 MkII Microphone Preamp
The ISA428 MkII provides four of Focusrite’s prestigious transformer-based microphone preamps. It features the same classic circuitry and renowned audio quality found in the original at a new level of affordability. With selectable input impedance, direct instrument inputs and an optional eight channels of high-quality analogue to digital conversion, the ISA428 MkII creates the perfect front end for the discerning recording professional. First introduced in 1985, the ISA microphone preamp holds a reputation for outstanding transparency along with subtle warmth contributed by transformer core saturation. The addition of a variable impedance circuit allows ISA users to perfectly match the preamp with any microphone, or to use different settings creatively to shape the sound of the microphone. Unchanged for decades, the ISA microphone preamp topology offers incredible clarity and the signature Focusrite sound that makes it the top choice among many audio professionals today. Phantom power available on every channelTrim control allows 20dB of extra gain with fine adjustment Phase reverse buttons help to correct phase issues with microphones or cablesOptional A-D converters easily synchronise to external word clockThe optional class-leading eight-channel A-D converter option used with the ISA828 is also compatible with the ISA428 MkII. Along with the four mic preamp inputs, four additional inputs allow you to route other line signals through the converter. Four instrument inputs, instantly accessible on the front panel, allow quick and easy connection without the need for a separate DI box. Extra processing can be placed between preamp and conversion via the units dedicated insert points, featured on every channel. Finally, accurate six-segment LED metering is designed to catch even the fastest transients on every channel. Features: Four ISA series transformer-based preampsISA series mic preamps have been the producers’ choice on countless hit records over the last two decades. Eight-channel optional A-D converterFour additional A-D converter inputs allow eight channels of high-quality conversion, with a dynamic range of 122dB and jitter performance below 250 picoseconds. Selectable impedanceIdeal for mic matching or extended microphone creativity. Settings include the ‘Vintage ISA110’ setting, providing the original Focusrite signature sound. Four front panel instrument inputsInstant access on the front fascia - no separate DI box required. Dedicated analogue insert pointsSwitchable insert points are featured on every channel, allowing routing (between preamp and output) through additional external processing. Variable high-pass Focusrite filterProvided on every channel, this is the same filter as featured on the original ISA428. Accurate LED meters for every channelClear metering designed to catch even the fastest and most elusive of transients. Mic InputsFrequency response at minimum gain (0dB): - 0.35 dB at 20Hz and –3dB at 122kHzFrequency response at maximum gain (60dB): – 2.5 dB at 20Hz and –3dB 103kHzGain range: 0dB to +60dB in 10dB steps, plus 0dB to +20dB continuously variable trim•Maximum headroom: + 7.4 dBuTHD+N: 0.0009 % (measured at 1kHz -20dBu input signal, at 30dB gain setting, with a 20Hz/22kHz bandpass filter)Noise EIN: -126dB (measured at 60dB of gain with 150O termination and 20Hz/22kHz bandpass filter)Noise at main output with unity gain: -98dBu (measured with a 20Hz/22kHz bandpass filter)SNR: 123dB (relative to max output 25dBu) SNR: 120dB (relative to 0dBFS (+22dBu)CMRR: 88dB. Input Impedance, variable: 600O, 1400O, 2400O, 6800OLine InputsFrequency Response at unity gain (0dB): - 0.3 dB at 20Hz and –3dB at 94kHzGain range: -20dB to +10dB in 10dB steps, plus 0dB to +20dB continuously variable trimMaximum headroom: + 25.4 dBuTHD+N: 0.002 % (measured with +4dBu input signal, 0dB gain setting, with a 20Hz/22kHz bandpass filter)Noise at main output with unity gain: -91dBu (measured with a 20Hz/22kHz bandpass filter)SNR: 116dB (relative to
Avid Pro Tools S3 Control Surface
Based on the award-winning Pro Tools S6, Pro Tools S3 is a compact, EUCON-enabled, ergonomic desktop control surface that offers a streamlined yet versatile mixing solution for the modern sound engineer. Like S6, S3 delivers intelligent control over every aspect of Pro Tools and other DAWs, but at a more affordable price and is compatible with Pro Tools, Logic, Cubase, Nuendo, Performer, Pytamix, and more. While its small form factor makes it ideal for space-confined or on-the-go music and post mixing, it packs enormous power and accelerated mixing efficiency for faster turnarounds, making it the perfect fit everywhere, from project studios to the largest, most demanding facilities. Work smarter and fasterS3 combines traditional console layout design with the proven advancements of Pro Tools S6, ensuring highly intuitive operation, regardless of your experience level. From record-enabling, soloing, and muting tracks, to editing plug-ins, recalling snapshots, and automating mixes, you get the tactile control you need to create great sounding mixes faster—with much more precision than working with a keyboard and mouse alone. Plus, when paired with Pro Tools, you gain the advantage of faster workflows and unique features that accelerate your efficiency every step of the way. Create your mix, your wayWith EUCON technology at its core, not only can you mix sessions using Pro Tools, Logic Pro, Cubase, and other DAWs, you can also customize the surface for your task at hand. Create up to 12 custom mixer layouts and recall them to the surface at any time—ideal for mixing drums, vocals, dialog, sound effects, and other groupings. Plus, you can switch between applications with ease, giving you the choice to work with what you want—and the capability to take on any project that comes your way. Features: 16 channel strips with touch-sensitive, motorized faders and 10-segment signal level meter32 touch-sensitive, push-button rotary encoders for panning, gain control, plug-in parameter adjustments, and more 16 channel control, 16 assignable), each with a tricolor LED function indicator32 high-resolution OLED displays for viewing track names/numbers, detailed metering data (from mono to 5.1 surround), parameter names/values, current automation mode, and moreSolo, mute, channel select, and record/automation-enable keys on every channelTouch strip provides easy access to transport controlsS3 can also be used alongside Artist Transport if you need full jog/shuttle wheel controlsDozens of dedicated buttons and switches for navigation, automation, control assignment, and software controlBuilt-in 4x6 AVB Core Audio interface Includes 2 XLR mic/line inputs, 2 TRS line inputs, 2 XLR line outputs, 2 TRS line outputs, and a stereo headphone outputCompatible with Pro Tools, Logic, Cubase, Nuendo, Performer, Pytamix, and moreGet your Avid Pro Tools S3 Control Surface today at the guaranteed lowest price from Sam Ash Direct with our 45-day return and 60-day price protection policy.
MOTU 828X Thunderbolt/USB 28x30 Audio Interface
The MOTU 828X Audio Interface provides 32-bit mixing for all 28 inputs and 30 outputs with on-board DSP effects. Connect any of your instruments or mics through the interface and record with no latency or extra strain on your computer. Well-ConnectedIts front panel has two combo XLR/TRS mic/guitar inputs going into MOTU & #39; s clean, high-headroom preamps, Two headphone jacks with volume control, digitally controlled trim with gain control, pads & 48V phantom power. & nbsp; Completing the unit is 8 balanced TRS analog in/out, two banks of optical (ADAT and TOSLink formats), S/PDIF (coax) digital I/O, dedicated main outs on XLRs, -20 dB pad, and V-Limit™, a smooth hardware limiter that also provides additional protection with MOTU & #39; s own Soft Clip™ feature. All analog inputs on the MOTU 828X are have digital analog trim controls with 1 dB increments. The mic/guitar input trims can be adjusted on the front-panel digital knobs that show on the LCD display and all TRS 1/4-inch inputs can be trimmed through MOTU & #39; s powerful CueMix FX software. Different trim configurations can be saved as files on disk for instant recall and, as with other CueMix-supported interfaces, you can & nbsp; operate CueMix FX from your iPad, with support for both Mac and PC. FX and Gain with No PainAdd Classic Reverb™ with lengths up to 60 seconds. Further sculpt your sound with 7-band parametric EQ featuring filter types carefully modeled after British analog console EQs. Choose between two forms of compression: & nbsp; a conventional compressor and the Leveler™, & nbsp; an accurate model of the legendary LA-2A™ optical compressor that provides vintage, & nbsp; musical automatic gain control. Analyze and scope any mono or stereo audio stream with advanced diagnostic tools, including a full-screen real-time FFT display, spectrogram “waterfall” display, full-featured oscilloscope, X-Y plot, and linear/polar phase analysis graphs. Pre-programmed Operation Wherever You GoThe 828x can also be used as a standalone digital mixer. After programming the on-board mixing in the studio, unplug the 828x from the computer and take it on the road for operation as a stand-alone mixer with effects. All mixing and effects parameters are adjustable using the front panel backlit LCD. Additional advanced features include: 192 kHz operation, Direct Digital Synthesis™ (DDS) precision clocking, Direct SMPTE time code sync (no extra synchronizer needed) MIDI I/O Cross-platform software including MOTU’s & nbsp; CueMix FX application with WDM/ASIO/Core Audio drivers for Mac (OS X) and Windows (8, 7 and Vista). MOTU’s AudioDesk® Workstation software provides 24-bit recording/editing and 32-bit mixing/processing/mastering. Click on the "Video" tab for more detailed infoon the MOTU 828X Interface
RME ADI-2 DAC FS Ultra-Fidelity PCM/DSD DA Converter with AKG K240 Studio Pro Headphones & 10-Pack Straps Bundle
The RME ADI-2 DAC FS Bundle is a two-channel digital-to-analog converter for the discerning audiophile or engineer. It offers 32-bit conversion up to 768 kHz, making it compatible with high-resolution PCM formats and even DSD256. Additionally, the ADI-2 is compatible with iOS devices with apposite adapters, so you can enjoy audio streamed off your tablet or iPhone in a high-quality manner. For connections, the ADI-2 DAC FS offers stereo RCA outputs, stereo XLR connections, a 1/4" headphone output, and a low-noise IEM output. You can feed digital signal to the unit over USB, S/PDIF coaxial, S/PDIF Optical, or ADAT. The built-in headphone amplifier provides low THD values even with 32- or 16-Ohm headphones, ensuring a transparent and crystal-clear sound. Onboard DSP allows you to dial in crossfeed, or instantiate a precise EQ for your exact predilections. This DSP also offers other features, such as a loudness contour reminiscent of old HiFi systems, and M/S encoding or decoding. This bundle includes a K 240 Studio headphones from AKG feature a semi-open circumaural design, and use patented Varimotion technology and extra-large transducers to deliver extremely precise, detailed sound. Headphones have a self-adjusting headband, as well as thick around-ear cushions for lasting comfort. The single-sided detachable straight cable resists tangles and can be easily replaced. The cable has a gold-plated 3.5 mm plug with a 1/4" screw-on adapter to provide wide compatibility with consumer and professional audio devices. Plus a 10-Pack Straps. Box Contains RME ADI-2 DAC FS Ultra-Fidelity PCM/DSD DA Converter Remote Control with Battery External Power Supply Power Cord USB Cable 10-Pack Straps 2-Year Warranty AKG K 240 Studio Pro Stereo Headphones Gold-Plated 1/4" Adapter Detachable Cable
IK Multimedia iKlip Xpand Mic Stand Mount for iPad, iPad Mini & other tablets
MAIN OVERVIEW FEATURES: Features: Adjustable
Tascam CG-1800 Video Sync / Master Clock Generator
Click on "More info" for specs and further detailsTascam & #39; s CG-1800 features four video clock outputs and a video clock input compatible with tri-level sync. An additional Analyzer function & nbsp; measures input frequencies, levels, and termination. The CG-1800 has twelve word clock outputs, two AES/EBU, and two S/PDIF outputs. Two of the clock outputs can output multiples of 1/2Fs, 1/4Fs, 2xFs, 4xFs, and 256x the selected sampling rate. Four front-panel preset buttons recall often-used frequencies and settings, and presets can be saved to a USB drive. Inside the CG-1800 clock generator is a high-quality OCXO with 0.01PPM accuracy- the highest in its class.. It also features Jitter Management and Glitch-free Relocking circuits. Tascam & #39; s CG-series generators provide confident, highly-accurate clock outputs. For even more demanding accuracy, a 10MHz input can take a signal from Rubidium or GPS-based generators. With best-in-class clock precision, glitchless relocking, and broadcast-specific features, the Tascam CG-1800 provides reliable synchronization to post and broadcast installations. Features: Four video clock outputsVideo clock inputTri-level sync support for high-definition videoAdditional Analyzer functions for troubleshootingHigh-precision OCXO (Oven-Controlled Crystal Oscillator) Jitter management circuit for stable clock outputGlitchless relocking prevents glitches from dropout & recovery10MHz input for use with Rubidium or GPS clock generatorsTwelve word clock outputsSupports 1/2Fs, 1/4Fs, 2xFs, 4xfS, and 256xFs selected rateTwo AES/EBU and two S/PDIF outputsWord clock and AES/EBU clock inputsFour system presets, saved internally to USB drive backupSampling Frequencies from 32kHz to 192kHz supportedPanel lock switch to prevent accidental changes1u rack mount sizeGet your Tascam CG-1800 today at the guaranteed lowest price from Sam Ash Direct with our 45-day return and 60-day price protection policy, plus fast,
K&M 16080 Clamp-On Headphone Holder
This new headphone holder is simply clamped to the tubes of a music stand or microphone stand and is generally suitable for a tube diameter max. 1.181". The soft rubber support can easily take two sets of headphones. In addition, 2 in-ear headphones can also be hung on the slotted front of the holder. The headphones are close to hand and out of harm & #39; s way. Steel construction Protective rubber support Easily mounts to music stand or mic stand K & M Item No. 16080.000. 56From the studio to the stage, Sam Ash Music has you covered with the latest gear and accessories. With our many decades of experience and efficient order processing, your satisfaction is guaranteed!
IK Multimedia iLoud Micro Monitor Travel Bag
To protect your iLoud Micro Monitor when you’re carrying it around, you can order the iLoud Micro Monitor Travel Bag, a durable, 100% polyester case featuring a stitched-in iLoud Micro Monitor logo, adjustable straps and a zippered pouch for cables and other small items.Lets Talk About the Micro Mointors:If you are looking at a travel bag for the iLoud Micro Monitors you most likely have them already. But for the people who dont have them, they are the smallest active studio reference monitoring system in the world, iLoud Micro Monitor provides you with ultra-accurate true linear frequency response with no coloration. And if you work in a home or small studio you have even greater challenges, from the lack of space on your desk to the “less than ideal” position of your audio workstation, typically placed against a wall. Best of all, it offers high-end features that can be found only in monitors in big budget studios, but at a price that everyone can afford! So, who would & #39;nt want to prtoect them? Features:100% PolyesterDurable Stiched in Logo Adjustable Straps Zippered Pouch Get your iLoud Micro Monitor Travel Bag today at the guaranteed lowest price from Sam Ash Direct with our 45-day return and 60-day price protection policy.
On-Stage TCM9161M iPad Snap-On Cover with Round Clamp, Mauve
It & #39; s the fast and easy way to mount your tablet to everyday objects and surfaces. The u-mount is the ideal balance of ease and versatility. The TCM9161 is constructed from a combination of aluminum and soft velveteen plastic. There are precise cutouts for all of the tablet’s controls, cameras, and ports. A 360° Ball Joint provides rotation and tilt adjustment, while a Pull Back Release Sleeve makes removing the cover from the Mounting Bar a breeze. There’s even a Prop-Up insert included which converts the quick release into a slip-free tabletop monopod. Mounting bar handles tube and pipes 21mm to 30mm in diameter. Hands-Free or Hands-OnThe quick release design means versatility. Need to walk the room to hear what the mix sounds like off stage, or you want to capture some action on video? Simply release the cover from the clamp post and be on your way. When you & #39; re done walking around, simply click the cover back into the clamp post and you’re hands-free again. It’s perfect for audio engineers, grade school teachers, AV presenters, and everyone in between. The u-mount adds a degree of protection and enhanced grip to your iPad®. The Snap-On™ back cover is a tough combination of aluminum and high-strength velvet-textured plastic. Precision cut-outs provide access to all the tablet’s buttons and keep the microphone, cameras, speaker, headphone jack, and data/charging port 100% functional. Features• & nbsp; Quick Disconnect version of the patent-pending u-mount system• & nbsp; Pull Back Release Sleeve for instant removal from mounting bar• & nbsp; Mount your tablet to everyday objects and surfaces• & nbsp; u-mount versatility with the ease and convenience of a Snap-On cover• & nbsp; Velveteen inner lining provides grip and cushioning• & nbsp; Threaded aluminum boss allows for a variety of optional mounting devices• & nbsp; Cutouts for all of the tablet’s controls, cameras, and ports• & nbsp; Steel ball joint provides 360° rotation, allowing 30° of tilt at any angle, plus three 90° slots for precise slip-free positioning• & nbsp; Mounting Clamp handles tube and pipes 21mm to 30mm in diameter• & nbsp; Fits iPad® 2, 3 & 4 (Models A1395, A1396, A1397, A1403, A1416, A1430, A1458, A1459, A1460)Get the latest iOS and Tablet accessories right here at Sam Ash Direct! With our many decades of experience and efficient order processing, your satisfaction is guaranteed!
